SEARCH · Geology Reports

Results for “Idaho Geological Survey Geologic Map”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6Linked to original sources

USGS2020

Fault trace mapping and surface-fault-rupture special study zone delineation of the Wasatch Fault Zone, Utah and Idaho

The Wasatch fault zone (WFZ) is a 220-mile-long (350-km) fault zone divided into 10 structural segments extending from southeastern Idaho to central Utah. The central five segments of the WFZ underlie the densely populated Wasatch Front region, where the majority of Utah’s population and economy are proximal to the fault zone. The West Valley fault zone (WVFZ) is an antithetic structure related to the WFZ and runs through the Salt Lake Valley. Communities on or adjacent to the WFZ are at risk of earthquake damage, due to their proximity to the fault zones. During 2016–2018, the Utah Geological Survey and a U.S. Geological Survey collaborator performed updated fault mapping of 39 7.5' quadrangles along the WFZ using recently acquired high-resolution topographic data derived from airborne light detection and ranging (lidar) elevation data. Previous geologic mapping, paleoseismic investigations, historical aerial photography, and field investigations were also used to identify and map surface fault traces and infer fault locations. Special study zones were delineated around fault traces to facilitate understanding of the surface-rupturing hazard and associated risk. Defining these special study zones encourages the creation and implementation of municipal and county geologic-hazard ordinances dealing with hazardous faults. We identified potential paleoseismic investigation sites where fault scarps appear relatively pristine, are located in geologically favorable settings, and where additional earthquake timing data would be beneficial to the continued earthquake research of the WFZ. The fault geometries, attributes, and special study zones were published in the online Utah Geologic Hazards Portal simultaneously with this Report of Investigation (RI). This report contains supplementary material describing the data and methods used to perform the mapping and in locating potential paleoseismic investigation sites in the study area. This work is critical to raise awareness of earthquake hazards in areas of Utah experiencing rapid growth.

Idaho, Utah↗

USGS2014

The U. S. Geological Survey's gravity program in Washington, Idaho, Montana, and Wyoming

The following summary of the U . S . Geological Survey gravity program in Washington , Idaho , Montana , and Wyoming is one of a series of short papers that outline Geological Survey gravity projects in the western United States. The substance of this summary is a list of references of published papers on U . S . Geological Survey gravity projects in the northwestern states together with an index map (Figure 1) showing the location of the project, the approximate a real coverage reported in the publication, and the contour map given in the publication. Areas in Figure 1 are related to the References (part 2) by a number code. In addition, the gravity projects in progress are listed in Table 1, indicating the area in which the work is being done and the person in charge of the project. Capital letter relate the locations of the projects in Figure 1 to the list of projects in Table 1. No attempt has been made to indicate the areal coverage or contour interval of the projects in progress.

Washington, Idaho, Montana, Wyoming↗

USGS2001

The National Map - Washington-Idaho Pilot Project

Governments depend on a common set of geographic base information as a tool for economic and community development, land and natural resource management, and health and safety services. Emergency management and defense operations rely on this information. Private industry, nongovernmental organizations, and individual citizens use the same geographic data. Geographic information underpins an increasingly large part of the Nation's economy. Available geographic data often have the following problems: * They do not align with each other because layers are frequently created or revised separately, * They do not match across administrative boundaries because each producing organization uses different methods and standards, and * They are not up to date because of the complexity and cost of revision. The U.S. Geological Survey (USGS) is developing The National Map to be a seamless, continuously maintained, and nationally consistent set of online, public domain, geographic base information to address these issues. The National Map will serve as a foundation for integrating, sharing, and using other data easily and consistently. In collaboration with other government agencies, the private sector, academia, and volunteer groups, the USGS will coordinate, integrate, and, where needed, produce and maintain base geographic data. The National Map will include digital orthorectified imagery; elevation data; vector data for hydrography, transportation, boundary, and structure features; geographic names; and land cover information. The data will be the source of revised paper topographic maps. Many technical and institutional issues must be resolved as The National Map is implemented. To begin the refinement of this new paradigm, pilot projects are being designed to identify and investigate these issues. The pilots are the foundation upon which future partnerships for data sharing and maintenance will be built.

Fact Sheet↗

USGS1976

Basic data from five core holes in the Raft River geothermal area, Cassia County, Idaho

Studies of the geothermal aspect-of the Bridge area of the Raft River basin in south-central Idaho (fig. 1) by the U.S. Geological Survey began in 1972 when Young and Mitchell (1973) made a geochemical and geologic reconnaissance of selected thermal waters in Idaho. The Bridge area had been designated the Frazier known geothermal resource area (Frazier KGRA) by the U.S. Geological Survey (Godwin and others-, 1971) . Since 1972, several units of the Geological Survey have studied the area to provide data for the U.S. Energy Research and Development Administration, which proposes to ascertain whether the geothermal resource can be developed for power generation and other uses. The studies include geologic mapping, geophysical surveys, water sampling, test drilling, and studies of all available drill- hole data. A list of reports already prepared on the area is included with this report. Core drilling of five holes began in August 1974 and was completed in March 1975. These holes are referred to as intermediate-depth core holes, principally because in the spring of 1974, 35 auger holes 25 to 98 feet (7.6 to 30 meters) were completed in the area (Crosthwaite, 1974), and the Aerojet Nuclear Company, under the auspices of the U.S. Energy Research and Development Administration, was planning some deep drilling 4,000 to 6,000 feet (1,200 to 1,800 meters) (fig. 1). The purpose of the core drilling was to provide information to test geophysical interpretations of the subsurface structure and lithology and to provide hydrologic and geologic data on the shallow part of the geothermal system. Samples of the core were made available to several divisions and branches of the Geological Survey and to people and agencies outside the Survey. This report presents the basic data from the core holes that had been collected to September 1, 1975, and includes lithologic and geophysical well logs, chemical analyses of water (table 1), and laboratory analyses of cores (table 2) that were completed as of the above date. The data were collected by the Idaho District office, Hydrologic Laboratory, Borehole Geophysics Research Project, and Drilling, Sampling, and Testing Section, all of the Water Resources Division, and the Branch of Central Environmental Geology of the Geologic Divison.

Idaho↗

USGS2014

Archive of digital chirp subbottom profile data collected during USGS Cruise 13GFP01, Brownlee Dam and Hells Canyon Reservoir, Idaho and Oregon, 2013

From March 16 - 31, 2013, the U.S. Geological Survey in cooperation with the Idaho Power Company conducted a geophysical survey to investigate sediment deposits and long-term sediment transport within the Snake River from Brownlee Dam to Hells Canyon Reservoir, along the Idaho and Oregon border; this effort will help the USGS to better understand geologic processes. This report serves as an archive of unprocessed digital chirp subbottom data, trackline maps, navigation files, Geographic Information System (GIS) files, Field Activity Collection System (FACS) logs, and formal Federal Geographic Data Committee (FGDC) metadata. Gained (showing a relative increase in signal amplitude) digital images of the seismic profiles are also provided. Refer to the Acronyms page for expansions of acronyms and abbreviations used in this report.

Idaho;Oregon↗

USGS1979

Suspended- and bedload-sediment transport in the Snake and Clearwater rivers in the vicinity of Lewiston, Idaho, August 1976 through July 1978

Impoundment of water in the Snake River and Clearwater River arms behind Lower Granite Dam (see cover map) began in June 1975. At this time, Lower Granite Reservoir and Lock facilities, constructed by the USACE (U.S. Army Corps of Engineers), Walla Walla District, became operational. Construction and operation of this facility necessitated collection of hydrologic data that did not exist prior to construction. The USACE requested the USGS (U.S. Geological Survey) to collect hydraulic- and channel-geometry data and describe sediment-transport characteristics, beginning in the spring of 1972. This report summarizes information collected during August 1976 through July 1978 and is the fifth in a series of reports designed to release hydrologic data on a timely basis. Although some of the data were collected during the late summer and fall periods (August through December) of 1976 and 1977, most were collected during the spring runoff periods of 1977 and 1978. Therefore, for convenience, data contained in this report will be referred to as the 1977-78 data. Because this is primarily a basic-data report, no interpretation of the data is provided. This report presents tables of selected data collected and computations compiled since the 1976 report (Seitz, 1976). Most of the tabular data are also presented on graphs. Some of the graphs show plots of data since 1972~ others show plots of only the 1977-78 data. Relatively minor amounts of bedload were transported during the 1977 drought period. Therefore, regular scheduled sampling of the bedload was impractical. Only two bedload samples were collected from the Clearwater River in 1977. The resultant data are included in tables 10, 12, and 14, and figure 6. All bedload data in this report should be considered tentative, pending completion of sampler-calibration studies and possible adjustment of the data to correct for sampler efficiency. An analysis of the middle Snake River streamflow record was made during 1977. The streamflow rating for the Snake River near Anatone, Washington, gage was found to be in error at high stages. The streamflow record for water years 1974 and 1975 was revised and published with 1976 water-year data (Water Resources Data for Idaho, Water Year 1976). The revised Snake River near Anatone streamflow rating was used to recompute the sediment-discharge rating curve (fig. 3). This study program is funded by the USACE through a cooperative agreement with the USGS. All field work, laboratory analysis, and compilation of data are being conducted by the USGS. Data collection is scheduled to terminate at the end of the 1979 runoff season. A reanalysis of all data collected since the start of the program will correct all provisional records since 1972, including the 1974, 1975, and 1976 years for the Snake River near Anatone station.

Idaho↗

USGS2022

Maybe so, maybe not: Canis lepophagus at Hagerman Fossil Beds National Monument, Idaho, USA

A canid dentary is described from the Pliocene Glenns Ferry Formation at Hagerman Fossil Beds National Monument, south-central Idaho, USA. The specimen possesses traits in alliance with and measurements falling within or exceeding those of Canis lepophagus . The dentary, along with a tarsal IV (cuboid) and an exploded canine come from the base of the fossiliferous Sahara complex within the monument. Improved geochronologic control provided by new tephrochronologic mapping by the U.S. Geological Survey-National Park Service Hagerman Paleontology, Environments, and Tephrochronology Project supports an interpolated age of approximately 3.9 Ma, placing it in the early Blancan North American Land Mammal Age. It is conservatively referred to herein as Canis aff. C . lepophagus with the caveat that it is an early and robust example of that species. A smaller canid, initially assigned to Canis lepophagus and then to Canis ferox , is also known from Hagerman. Most specimens of Canis ferox , including the holotype, were recently reassigned to Eucyon ferox , but specimens from the Hagerman and Rexroad faunas were left as Canis sp. and possibly attributed to C . lepophagus. We agree that these smaller canids belong in Canis and not Eucyon but reject placing them within C . lepophagus ; we refer to them here as Hagerman-Rexroad Canis . This study confirms the presence of two approximately coyote-sized canids at Hagerman and adds to the growing list of carnivorans now known from these fossil beds.

Idaho↗

USGS2015

Use of slope, aspect, and elevation maps derived from digital elevation model data in making soil surveys

Maps showing different classes of slope, aspect, and elevation were developed from U.S. Geological Survey digital elevation model data. The classes were displayed on clear Mylar at 1:24 000-scale and registered with topographic maps and orthophotos. The maps were used with aerial photographs, topographic maps, and other resource data to determine their value in making order-three soil surveys. They were tested on over 600 000 ha in Wyoming, Idaho, and Nevada under various climatic and topographic conditions. Field evaluations showed that the maps developed from digital elevation model data were accurate, except for slope class maps where slopes were <4%. The maps were useful to soil scientists, especially where (i) class boundaries coincided with soil changes, landform delineations, land use and management separations, and vegetation changes, and (ii) rough terrain and dense vegetation made it difficult to traverse the area. In hot, arid areas of sparse vegetation, the relationship of slope classes to kinds of soil and vegetation was less significant.

Book chapter↗

USGS2012

Groundwater status and trends for the Columbia Plateau Regional Aquifer System, Washington, Oregon, and Idaho

Well information and groundwater-level measurements for the Columbia Plateau Regional Aquifer System in Washington, Oregon, and Idaho, were compiled from data provided by the U.S. Geological Survey and seven other organizations. From the full set of about 60,000 wells and 450,000 water-level measurements a subset of 761 wells within the aquifers of the Columbia River Basalt Group (CRBG) then was used to develop a simple linear groundwater-level trend map for 1968–2009. The mean of the trends was a decline of 1.9 feet per year (ft/yr), with 72 percent of the water levels in wells declining. Rates of declines greater than 1.0 ft/yr were measured in 50 percent of wells, declines greater than 2.0 ft/yr in 38 percent of wells, declines greater than 4.0 ft/yr in 29 percent of wells, and declines greater than 8.0 ft/yr in 4 percent of wells. Water-level data were used to identify groups of wells with similar hydraulic heads and temporal trends to delineate areas of overall similar groundwater conditions. Discontinuities in hydraulic head between well groups were used to help infer the presence of barriers to groundwater flow such as changes in lithology or the occurrence of folds and faults. In areas without flow barriers, dissimilarities in response of well groups over time resulted from the formation of groundwater mounds caused by recharge from irrigation or regions of decline caused by pumping. The areas of focus for this analysis included the Umatilla area, Oregon, and the Palouse Slope/eastern Yakima Fold Belt in the Columbia Basin Ground Water Management Area (GWMA) consisting of Adams, Franklin, Grant, and Lincoln Counties, Washington. In the Umatilla area, water levels from 286 wells were used to identify multiple areas of high hydraulic gradient that indicate vertical and horizontal barriers to groundwater flow. These barriers divide the groundwater-flow system into several compartments with varying degrees of interconnection. Horizontal flow barriers commonly correspond to mapped geologic structure and result in horizontal hydraulic gradients that progressively become steeper from north to south corresponding to an increase in structural complexity that may be impeding recharge from the uplands into the heavily developed areas. Most CRBG aquifers in the Umatilla area are declining and since 1970, cumulative declines range from about 100 to 300 feet. Significant vertical hydraulic gradients are documented for relatively small areas near Umatilla, and since the 1970s, downward vertical gradients in these areas have been increasing as hydraulic heads in the deeper units have declined. The absence of vertical gradients over much of the area may be a consequence of flow through commingling wells that results in the equilibration of the heads between aquifers. On the Palouse Slope in the central GWMA, large groundwater declines occurred during 1968–2009 along a north-south swath in the middle of the region. An analysis of 1,195 wells along major flow paths and through the area of persistent groundwater-level declines indicates that barriers to flow are not as evident in this area as in Umatilla. This is consistent with the geologic interpretation of the Palouse Slope as being a gently folded structure created by voluminous sheet flows of CRBG lavas. Groundwater discharge into the sediment-filled coulees, where the upper aquifers are intersected at land surface by incised canyons, is proposed as an alternative to explain local steepening of the hydraulic gradient along the Palouse Slope previously attributed to the presence of a groundwater dam. Comparison of generalized potentiometric surface maps developed for pre-development conditions and post-2000 conditions indicate that pre-development groundwater flow was from the uplands toward the Columbia and Snake River and that post-2000 flow patterns in the area are controlled by irrigation practices that have resulted in broad regions of elevated or depressed hydraulic head. In some cases, irrigation-related changes in head have reversed groundwater flow directions. Evidence of significant vertical hydraulic gradients exists, although much of the aquifer thickness is affected by commingling of wells. The effect of commingling and its relative contribution to problems related to groundwater-level declines remains unclear.

Washington, Oregon, Idaho↗

USGS2010

Lead isotope database of unpublished results from sulfide mineral occurrences — California, Idaho, Oregon, and Washington

The Pb isotope database for sulfide deposits and occurrences in the Western United States was funded by the Mineral Resources Program, U.S. Geological Survey (USGS). Reports on Pb isotope data from Alaska were published in Church and others (1987a) and Gaccetta and Church (1989). The primary objectives of the project were three-fold: * To utilize Pb isotope signatures, in conjunction with the regional mapping, to assess the relative ages and to categorize the types of deposits studied, * To relate the Pb isotope and trace-element geochemical signatures of specific deposits and occurrences to ore-forming processes, and * To use the Pb isotope data to correlate lithotectonic terranes within the northern Cordillera. The report by Church and others (1987b) shows how this fingerprinting methodology can be applied to trace the offset of lithostratigraphic terranes

California, Idaho, Oregon, Washington↗

USGS2012

Hydrological information products for the Off-Project Water Program of the Klamath Basin Restoration Agreement

The Klamath Basin Restoration Agreement (KBRA) was developed by a diverse group of stakeholders, Federal and State resource management agencies, Tribal representatives, and interest groups to provide a comprehensive solution to ecological and water-supply issues in the Klamath Basin. The Off-Project Water Program (OPWP), one component of the KBRA, has as one of its purposes to permanently provide an additional 30,000 acre-feet of water per year on an average annual basis to Upper Klamath Lake through "voluntary retirement of water rights or water uses or other means as agreed to by the Klamath Tribes, to improve fisheries habitat and also provide for stability of irrigation water deliveries." The geographic area where the water rights could be retired encompasses approximately 1,900 square miles. The OPWP area is defined as including the Sprague River drainage, the Sycan River drainage downstream of Sycan Marsh, the Wood River drainage, and the Williamson River drainage from Kirk Reef at the southern end of Klamath Marsh downstream to the confluence with the Sprague River. Extensive, broad, flat, poorly drained uplands, valleys, and wetlands characterize much of the study area. Irrigation is almost entirely used for pasture. To assist parties involved with decisionmaking and implementation of the OPWP, the U.S. Geological Survey (USGS), in cooperation with the Klamath Tribes and other stakeholders, created five hydrological information products. These products include GIS digital maps and datasets containing spatial information on evapotranspiration, subirrigation indicators, water rights, subbasin streamflow statistics, and return-flow indicators. The evapotranspiration (ET) datasets were created under contract for this study by Evapotranspiration, Plus, LLC, of Twin Falls, Idaho. A high-resolution remote sensing technique known as Mapping Evapotranspiration at High Resolution and Internalized Calibration (METRIC) was used to create estimates of the spatial distribution of ET. The METRIC technique uses thermal infrared Landsat imagery to quantify actual evapotranspiration at a 30-meter resolution that can be related to individual irrigated fields. Because evaporation uses heat energy, ground surfaces with large ET rates are left cooler as a result of ET than ground surfaces that have less ET. As a consequence, irrigated fields appear in the Landsat images as cooler than nonirrigated fields. Products produced from this study include total seasonal and total monthly (April-October) actual evapotranspiration maps for 2004 (a dry year) and 2006 (a wet year). Maps showing indicators of natural subirrigation were also provided by this study. "Subirrigation" as used here is the evapotranspiration of shallow groundwater by plants with roots that penetrate to or near the water table. Subirrigation often occurs at locations where the water table is at or above the plant rooting depth. Natural consumptive use by plants diminishes the benefit of retiring water rights in subirrigated areas. Some agricultural production may be possible, however, on subirrigated lands for which water rights are retired. Because of the difficulty in precisely mapping and quantifying subirrigation, this study presents several sources of spatially mapped data that can be used as indicators of higher subirrigation probability. These include the floodplain boundaries defined by stream geomorphology, water-table depth defined in Natural Resources Conservation Service (NRCS) soil surveys, and soil rooting depth defined in NRCS soil surveys. The two water-rights mapping products created in the study were "points of diversion" (POD) and "place of use" (POU) for surface-water irrigation rights. To create these maps, all surface-water rights data, decrees, certificates, permits, and unadjudicated claims within the entire 1,900 square mile study area were aggregated into a common GIS geodatabase. Surface-water irrigation rights within a 5-mile buffer of the study area were then selected and identified. The POU area was then totaled by water right for primary and supplemental water rights. The maximum annual volume (acre-feet) allowed under each water right also was calculated using the POU area and duty (allowable annual irrigation application in feet). In cases where a water right has more than one designated POD, the total volume for the water right was equally distributed to each POD listed for the water right. Because of this, mapped distribution of diversion rates for some rights may differ from actual practice. Water-right information in the map products was from digital datasets obtained from the Oregon Water Resources Department and was, at the time acquired, the best available compilation of water-right information available. Because the completeness and accuracy of the water-right data could not be verified, users are encouraged to check directly with the Oregon Water Resources Department where specific information on individual rights or locations is essential. A dataset containing streamflow statistics for 72 subbasins in the study area was created for the study area. The statistics include annual flow durations (5-, 10-, 25-, 50-, and 95-percent exceedances) and 7-day, 10-year (7Q10) and 7-day, 2-year (7Q2) low flows, and were computed using regional regression equations based on measured streamflow records in the region. Daily streamflow records used were adjusted as needed for crop consumptive use; therefore the statistics represent streamflow under more natural conditions as though irrigation diversions did not exist. Statistics are provided for flow rates resulting from streamflow originating from within the entire drainage area upstream of the subbasin pour point (referring to the outlet of the contributing drainage basin). The statistics were computed for the purpose of providing decision makers with the ability to estimate streamflow that would be expected after water conservation techniques have been implemented or a water right has been retired. A final product from the study are datasets of indicators of the potential for subsurface return flow of irrigation water from agricultural areas to nearby streams. The datasets contain information on factors such as proximity to surface-water features, geomorphic floodplain characteristics, and depth to water. The digital data, metadata, and example illustrations for the datasets described in this report are available on-line from the USGS Water Resources National Spatial Data Infrastructure (NSDI) Node Website http://water.usgs.gov/lookup/getgislist or from the U.S. Government website DATA.gov at http://www.data.gov with links provided in a Microsoft® Excel® workbook in appendix A.

California;Oregon↗

USGS2003

Geophysical surveys of Bear Lake, Utah-Idaho, September, 2002

The U.S. Geological Survey, in cooperation with researchers from several universities, has been studying the sediments of Bear Lake since 1996. The general purpose of this effort is to reconstruct past limnological conditions and regional climate on a range of timescales, from hundreds of years to hundreds of thousands of years. The objectives of the September, 2002 operations, preliminarily reported here, were (1) to compile a detailed bathymetric map of the lake using swath-mapping techniques, in order to provide baseline data for a variety of applications and studies, and (2) to complete a sidescan-sonar survey of the lake, providing a nearly complete acoustic image of the lake floor. Limited amounts of subbottom acoustic-reflection data (chirp) were also collected, along with samples of lake-floor sediments representative of different kinds of backscatter patterns.

Idaho, Utah↗

USGS1992

Mineral resource assessment of the Dillon 1° x 2° quadrangle, Idaho and Montana

The Dillon 1 ° x2° quadrangle in southwestern Montana and east-central Idaho was investigated as part of the U.S. Geological Survey's Conterminous United States Mineral Assessment Program (CUSMAP) to determine its mineral resource potential. An interdisciplinary study was made of geology, geochemistry, geophysics (gravity and aeromagnetics), remote sensing, and mineral deposits. The results of those studies, as well as mineral resource assessment of numerous mineraldeposit types, are published separately as a folio of maps. This report summarizes the studies, provides background information on them, and presents a selected bibliography relevant to the geology and mineral resources of the quadrangle. The quadrangle contains large resources of gold and substantial resources of talc and chlorite, all of which were being mined in the 1980's and early 1990's. Submarginal resources of molybdenum, copper, tungsten, and iron range from moderately large to large. Other commodities that may be present in significant amounts are chromite, lead, zinc, silver, barite, zeolite minerals, and various nonmetallic metamorphic minerals.

Idaho, Montana↗

USGS2012

Progress report geologic map of the Grouse Creek 30' x 60' quadrangle, and Utah part of the Jackpot 30' x 60' quadrangle, Box Elder County, Utah, and Cassia County, Idaho (Year 3 of 4);

No abstract available.

Idaho, Utah↗

USGS1993

Precisely locating the Klamath Falls, Oregon, earthquakes

The Klamath Falls earthquakes on September 20, 1993, were the largest earthquakes centered in Oregon in more than 50 yrs. Only the magnitude 5.75 Milton-Freewater earthquake in 1936, which was centered near the Oregon-Washington border and felt in an area of about 190,000 sq km, compares in size with the recent Klamath Falls earthquakes. Although the 1993 earthquakes surprised many local residents, geologists have long recognized that strong earthquakes may occur along potentially active faults that pass through the Klamath Falls area. These faults are geologically related to similar faults in Oregon, Idaho, and Nevada that occasionally spawn strong earthquakes. In this article we present preliminary results of a close-in, instrumental study of the Klamath Falls earthquake sequence, carried as a cooperative effort by scientists from the U.S Geological Survey (USGS) and universities in Washington, Orgeon, and California. In addition to obtaining much mroe accurate earthquake locations, this study has improved our understanding of the relationship between seismicity and mapped faults in the region.

Oregon↗

USGS2016

Borehole deviation and correction factor data for selected wells in the eastern Snake River Plain aquifer at and near the Idaho National Laboratory, Idaho

The U.S. Geological Survey (USGS), in cooperation with the U.S. Department of Energy, has maintained a water-level monitoring program at the Idaho National Laboratory (INL) since 1949. The purpose of the program is to systematically measure and report water-level data to assess the eastern Snake River Plain aquifer and long term changes in groundwater recharge, discharge, movement, and storage. Water-level data are commonly used to generate potentiometric maps and used to infer increases and (or) decreases in the regional groundwater system. Well deviation is one component of water-level data that is often overlooked and is the result of the well construction and the well not being plumb. Depending on measured slant angle, where well deviation generally increases linearly with increasing slant angle, well deviation can suggest artificial anomalies in the water table. To remove the effects of well deviation, the USGS INL Project Office applies a correction factor to water-level data when a well deviation survey indicates a change in the reference elevation of greater than or equal to 0.2 ft. Borehole well deviation survey data were considered for 177 wells completed within the eastern Snake River Plain aquifer, but not all wells had deviation survey data available. As of 2016, USGS INL Project Office database includes: 57 wells with gyroscopic survey data; 100 wells with magnetic deviation survey data; 11 wells with erroneous gyroscopic data that were excluded; and, 68 wells with no deviation survey data available. Of the 57 wells with gyroscopic deviation surveys, correction factors for 16 wells ranged from 0.20 to 6.07 ft and inclination angles (SANG) ranged from 1.6 to 16.0 degrees. Of the 100 wells with magnetic deviation surveys, a correction factor for 21 wells ranged from 0.20 to 5.78 ft and SANG ranged from 1.0 to 13.8 degrees, not including the wells that did not meet the correction factor criteria of greater than or equal to 0.20 ft. Forty-seven wells had gyroscopic and magnetic deviation survey data for the same well. Datasets for both survey types were compared for the same well to determine whether magnetic survey data were consistent with gyroscopic survey data. Of those 47 wells, 96 percent showed similar correction factor estimates (≤ 0.20 ft) for both magnetic and gyroscopic well deviation surveys. A linear comparison of correction factor estimates for both magnetic and gyroscopic deviation well surveys for all 47 wells indicate good linear correlation, represented by an r-squared of 0.88. The correction factor difference between the gyroscopic and magnetic surveys for 45 of 47 wells ranged from 0.00 to 0.18 ft, not including USGS 57 and USGS 125. Wells USGS 57 and USGS 125 show a correction factor difference of 2.16 and 0.36 ft, respectively; however, review of the data files suggest erroneous SANG data for both magnetic deviation well surveys. The difference in magnetic and gyroscopic well deviation SANG measurements, for all wells, ranged from 0.0 to 0.9 degrees. These data indicate good agreement between SANG data measured using the magnetic deviation survey methods and SANG data measured using gyroscopic deviation survey methods, even for surveys collected years apart.

Idaho↗

USGS1952

Stratigraphic sections of the Phosphoria formation in Idaho, 1947-48, Part I

The Permian Phosphoria formation of the western states contains one of the world's largest reserves of phosphate. Although previous investigations (see especially Mansfield, 1927), including reconnaissance geologic mapping and sampling, established the location of most of the important deposits and their quality of scattered localities, they were not sufficiently detailed to permit a comparison of the merits of individual deposits or an appraisal of the reserves of phosphate rock that might be available under present economic conditions. Because the growing importance of the western phosphate deposits requires a better, more detailed understanding of their distribution and quality, the Geological Survey began in 1947 a comprehensive investigation, including (1) reconnaissance geologic mapping, mostly in Montana, of areas in which the Phosphoria formation could occur but where it had not previously been looked for or found; (2) geologic mapping, mostly in Montana, at a scale no smaller than 1:62,500, of several areas known to contain the Phosphoria formation but not previously mapped except in reconnaissance fashion; (3) geologic and topographic mapping, at a scale of 1:12,000, of some of the richest, thickest, and most accessible deposits; (4) measuring, describing, and sampling all beds of the phosphatic and shaly parts, and in some places the full thickness, of the Phosphoria formation and its stratigraphic equivalents at one or two localities per township over the entire field; (5) chemical and spectrographic analysis of the samples for phosphate, fluorine, minor metals, oil, and rock-forming constituents; and (6) petrologic and geochemical studies of the rocks and minerals of the formation. These studies are designed to define the regional and local geologic structures in which the phosphate bed lie, to provide a basis for the estimation of reserves of the inferred class over the entire region, and to determine the origin of the rocks and the elements contained in them. The data collected are not of the detail required to plan actual mining operations, but it is hoped they will guide industry in the selection of individual deposits worthy of further exploration. Most of the field work contemplated as a part of this investigation is now completed. Although the data will not be compiled or published in final form for some years to come, segments of the data, accompanied by little or no interpretation, will be published as preliminary maps or reports as they are assembled. The present report is the first of a series presenting in abbreviated form the description and analyses of the beds measured and sampled at various localities in southeastern Idaho (pl. 1). Companion reports presenting segments of the data from Montana, Wyoming, and Utah (Swanson and others, 1952, and McKelvey and others, 1952a and 1952b) are being released at the same time as this report, and others are in preparation.

Idaho↗

USGS2018

A geophysical characterization of the structural framework of the Camas Prairie Geothermal System, southcentral Idaho

Play Fairway Analysis methods, utilizing existing geologic, thermal, geochemical, and geophysical data were employed in an initial assessment of geothermal resources in the Snake River Plain. These efforts identified the Camas Prairie in southcentral Idaho as a region with elevated resource potential. Subsequent efforts included structural and geophysical data collection to identify the most favorable structural settings for exploiting resources in the valley. The present work involved high-resolution gravity, magnetic, magnetotellurics (MT), field mapping, and seismic surveys to further characterize the system and target sites for exploration drilling around Barron’s Hot Springs (BHS) in the southwest part of the valley. Geophysical mapping and modeling reveal that the BHS coincides with a complex intersection of two major fault systems: a prominent NW-trending system that includes the Pothole fault, and EW-trending basin-bounding faults that control NS-extension. This complex zone includes a dense network of EW-oriented faults and a right stepover in the Pothole fault which, given the dominant dextral-normal to normal slip inferred for this fault, would promote extension in the immediate vicinity of the BHS. Surface faulting in this region indicate Pleistocene or younger slip, and seismic imaging documents offsets of shallow strata that suggest ongoing activity on these structures. MT modeling results show that this zone also coincides with a prominent conductive anomaly, characteristic of the presence of hydrothermal alteration or hydrothermal fluids. These results point to the importance of these structures in maintaining current and long-lived shallow hydrothermal activity around the BHS. The detailed structural mapping and conceptual framework developed from this study provide critical constraints for siting a drill hole aimed at documenting reservoir characteristics and informing potential future development of these geothermal resources.

Idaho↗