SEARCH · Geology Reports

Results for “Geochemistry: Exploration, Environment, Analysis”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

633 records · Page 6Linked to original sources

USGS2025

Cave records reveal recent origin of North America’s deepest canyon

We explore how and when Hells Canyon, North America’s deepest river gorge (~2,400 m deep), formed, addressing these fundamental questions first posed by W. Lindgren [ The Gold Belt of the Blue Mountains of Oregon (1901)]. Existing hypotheses about the canyon’s formation and timing of incision remain speculative due to a lack of direct constraints and geomorphic analysis in the canyon. Herein, we combine cosmogenic nuclide dating of cave-bound river deposits, river profile analysis, and numerical modeling to provide the first direct age constraints and systematic analysis of incision processes at work in Hells Canyon. Our study reveals a significant drainage capture triggered rapid incision at ~2.1 ± 1.0 Ma, establishing the Snake River’s modern route into the Columbia River system. The increased drainage area and subsequent increase in stream power resulted in the rapid incision of Hells Canyon and the formation of tributary knickpoints (KPs) that decrease in elevation away from the capture location. Cosmogenic dating of cave deposits indicates incision rates increased from ~0.01 to ~0.16 mm y −1 . Numerical modeling of the stream capture supports these observations, demonstrating how abrupt drainage area increase drives rapid river incision. Our findings from Hells Canyon provide a well-constrained example of how drainage capture can dramatically shape the evolution of a major river gorge.

Idaho, Oregon, Washington↗

USGS2025

Smectite-rich horizons in Inceptisols trigger shallow landslides in tropical granitic terranes

Puerto Rico was affected by >70,000 landslides in the wake of 2017 Hurricane Maria, and landslide prevalence was especially high in the Utuado region in the Cordillera Central. Landslide density was highest where soil parent material is granodiorite; landslide slip surfaces tended to be shallow (<60 cm), and often were mobilized rapidly and with long runout distances. This study combines field observations with soil mineralogy (bulk and clay fractions), soil geochemistry (bulk fraction), and soil strength as determined by field cone penetrometer testing (CPT) to test the hypothesis that clay-rich subsoil horizons function as slip planes when water-logged. Soil pits were excavated to depths of ∼200 cm in Ultisols on an undulating plateau and to ∼100 cm in Inceptisols on steep slopes (36-43 o ) that flank the plateau and cone penetrometer tests (CPT) were done within 2 m of the soil pit. Six pits were located adjacent to scarps from previous landslides, enabling analysis of soil profiles downward through extrapolated slip surfaces. Results from X-ray diffraction (XRD), X-ray fluorescence (XRF) and thermogravimetric analysis (TGA) indicate that soils are heterogeneous, often with subsoil horizons enriched in clay minerals and immobile elements (Al, Fe, Ti). Inceptisols on steep slopes often contain smectite-rich horizons at 30–60 cm depth that appear to function as slip surfaces; in other Inceptisols, such horizons are not present and landslide susceptibility is potentially lower. In Ultisols, soil mineralogy is dominated by kaolinite with minor halloysite, and increased kaolinite content at soil depths ≥80 cm at some sites suggests potential slip surfaces enhancing probability of landslides. The origin of clay-rich horizons appears to be (1) fractures in granodiorite that facilitate water flow and leaching, accelerating mineral dissolution during early weathering stages, and (2) smectite-rich buried soils under permeable colluvium likely deposited by a prior mass wasting event. Where clay-rich layers occur beneath more-permeable horizons, rapid infiltration then absorption of water in clay-rich subsoil horizons causes decreased shear strength and increased landslide susceptibility.

Puerto Rico↗

USGS1976

Medicine Lodge thrust system, east-central Idaho and southwest Montana

The Medicine Lodge thrust system, exposed in east-central Idaho and southwest Montana, is a major segment of the North America Cordilleran fold and thrust belt on which Precambrian and Paleozoic rocks have been telescoped and transported far east of their depositional area. The fault has overlapped rocks that initially were deposited in differing sedimentary environments on opposite sides of the northwest-trending geanticlinal Lemhi arch. The nature of the arch itself has been obscured by later thrusting, but it can be roughly reconstructed as a major landmass recurrently uplifted from Precambrian Y time at least through the Mesozoic. Although sections of the large landmass have been identified in the past as small islands, it was instead a southern extension of Belt island, and exerted a major influence on sedimentation patterns. The thrust has obscured recognition of correlative sedimentary rock units. It also appears to have controlled the distribution of volcanic rocks in satellite centers of the main field of Challis Volcanics. The thrust system has exerted a major influence on the emplacement of granodiorite-quartz monzonite stocks and related mineral deposits in east-central Idaho. Recognition of the fault as a major influence in intrusive activity and deposition of metallic mineral deposits suggests new possibilities for mineral resource exploration in this region. And consideration of the stratigraphic, paleogeographic, and structural framework of sedimentary rocks beneath the thrust suggests the possibility of petroleum and natural gas resources in the region north of the Snake River Plain.

Idaho, Montana↗

USGS2024

The EnMAP spaceborne imaging spectroscopy mission: Initial scientific results two years after launch

Imaging spectroscopy has been a recognized and established remote sensing technology since the 1980s, mainly using airborne and field-based platforms to identify and quantify key bio- and geo-chemical surface and atmospheric compounds, based on characteristic spectral reflectance features in the visible-near infrared (VNIR) and short-wave infrared (SWIR). Spaceborne missions, a leap in technology, were sparse, starting with the CHRIS/PROBA and EO1/Hyperion missions in the early 2000s, and providing spectroscopy data with limited spectral coverage and/or low data quality in the SWIR. Since 2019, several countries and agencies have successfully launched a number of spaceborne imaging spectroscopy systems into orbit or deployed them on the International Space Station (ISS) such as DESIS, PRISMA, HISUI, GF-5, EnMAP and EMIT. Among these recent missions, the German Environmental Mapping and Analysis Program (EnMAP) stands for its long-term development, sophisticated design with on-board calibration, high data quality requirements, and extensive accompanying science program. EnMAP was launched in April 2022 and, following a successful commissioning phase, started its operational activities in November 2022. The EnMAP mission encompasses global coverage from 80° N to 80° S through on-demand data acquisitions. Data are free and open access with 30 m spatial resolution, a high spectral resolution with a spectral sampling distance of 6.5 nm and 10 nm in the VNIR and SWIR regions respectively, and a high signal-to-noise ratio. In this paper, we aim to present the mission's current status, coverage, science capabilities and performance two years after launch. We show the potential of EnMAP for space-based imaging spectroscopy to operate in various environments, including high and low light levels, dense forests, Antarctic glaciers, and arid agricultural areas. EnMAP enables various applications in fields such as agriculture and forestry, soil compositional, raw materials, and methane mapping, as well as water quality assessment, and snow and ice properties. The results show that EnMAP's performance exceeds the mission requirements, and highlights the significant potential for contribution to scientific exploitation in various geo- and biochemical sciences. EnMAP is also expected to serve as a key tool for the development and testing of data processing algorithms for upcoming global operational missions.

Remote Sensing of Environment↗

USGS2026

USGS Geochron Database

Introduction Geochronology helps us understand Earth’s history by determining when important events, like volcanic eruptions, the rise of mountains, the formation of mineral resources, and changes in the landscape, happened. Geochronological data directly support geologic mapping and can inform decisions about geologic hazard mitigation, natural resource management, and infrastructure resilience. The U.S. Geological Survey (USGS) Geochron database provides access to more than 300,000 published, publicly available age measurements from more than 40,000 geological samples. This database is the result of a collaborative effort with State geological surveys and geoscientists from across the globe. The USGS Geochron database is the most comprehensive collection of geochronological data available for the United States. Users can view data through an interactive map explorer, download datasets, and integrate data into geospatial software or other analysis tools.

Fact Sheet↗

USGS2026

Revisiting the utility of regional-scale, high-quality geophysical data in mineral exploration - A case study featuring the Mammoth Magnetic Anomaly, Pinal County, Arizona

Regional aeromagnetic surveys passively measure the total magnetic intensity (TMI) and are a foundational tool used in mineral exploration (Airo, 2015). With the increased global demand and the number of critical mineral resources required for manufacturing high-tech devices, developing high-quality, regional-scale geophysical surveys could aid critical mineral exploration efforts and geologic mapping. In 2019, the U. S. Geological Survey launched the Earth Mapping Resources Initiative (Earth MRI) to modernize the geologic and geophysical mapping of regions that have the potential to contain critical mineral resources within the United States. In support of planning Earth MRI geophysical surveys, Drenth and Grauch (2019) defined five aeromagnetic data quality rankings (rank 1 through rank 5) applying them to the airborne geophysical survey inventory of the United States (Johnson et al., 2021). Rank 1 aeromagnetic surveys are of the highest quality, meeting modern standards and allowing best practices for qualitative and quantitative interpretation; whereas rank 5 aeromagnetic surveys are of the lowest quality, being useful only for qualitative interpretation of broad features. Through the Earth MRI effort, 48 high-quality, regional-scale rank 1 and 2 airborne magnetic and radiometric geophysical surveys have been planned, collected, or publicly release through May 2025 (U. S. Geological Survey, 2025). Here, a portion of a rank 1 Earth MRI aeromagnetic survey in southeast Arizona is presented and compared to a legacy rank 5 aeromagnetic survey over the Mammoth Magnetic Anomaly (MMA), demonstrating how modern, high-quality aeromagnetic data improves our view of crustal geology, aiding mineral exploration.

Arizona↗

USGS2025

Structural setting and geothermal potential of northeastern Reese River Valley, north-central Nevada: Highly prospective detailed study site for the INGENIOUS project

The northeastern part of the Reese River basin situated ~15 km southeast of Battle Mountain, Nevada, scored highly in the Nevada geothermal play fairway analysis (PFA) for hosting potential hidden geothermal systems. This site (also referred to as Argenta Rise) was therefore chosen for detailed study in the INGENIOUS project (INnovative Geothermal Exploration through Novel Investigations Of Undiscovered Systems). The high PFA scores resulted primarily from favorable structural settings (e.g., fault intersections and pull aparts) with relatively high slip rates on Quaternary faults. The INGENIOUS project is utilizing additional parameters and more rigorous analytical techniques to further advance exploration at this site. This includes integration of geological (e.g., Quaternary fault mapping) and new geophysical datasets (e.g., gravity, magnetics, MT data, and five reprocessed seismic reflection profiles) to build a structural model and to identify specific favorable sites for potential geothermal upwellings. Two-meter temperature surveys were also conducted in the area (139 measurements). This part of north-central Nevada is characterized by systems of intersecting northerly and ENE-striking faults within the broader Humboldt structural zone, a poorly understood belt of ENE-striking faults and relatively high heat flow extending across northern Nevada. Kinematic analysis of exposed fault surfaces shows that ENE-striking faults have accommodated sinistral-normal slip, and normal slip characterizes N- to NNE-striking faults. Northeastern Reese River Valley lies within a broad left step between major ENE-striking fault zones on the northern flanks of the Argenta Rim and Shoshone Range and thus corresponds to a broad pull-apart in the ENE-striking sinistral-normal fault system. Notably, the nearby Beowawe geothermal system in Whirlwind Valley (with abundant sinter, hot springs, and a geothermal power plant) occupies a fault intersection in a relatively small left step in a major ENE-striking sinistral-normal fault and may serve as an analogue for a potential hidden system in northeastern Reese River Valley. Existing geological maps, high-resolution lidar, and seismic reflection data demonstrate that northeastern Reese River Valley is structurally complex with multiple intersections between the ENE- and N- to NNE-striking fault systems. Some of these fault intersections correspond to low resistivity anomalies, magnetic lows, and/or very subtle 2-m temperature anomalies, which may indicate hidden geothermal upwellings. Three-dimensional modeling and temperature-gradient drilling are planned to further evaluate these sites for geothermal activity.

Nevada↗

USGS1976

Uranium and trace elements in stream sediments as an exploration tool

More than 45 trace elements have been reported in anomalous amounts in the uranium ores. The specific suite of elements associated with any one uranium deposit varies according to deposit type and geologic province. The primary geochemical halo of uranium and associated trace elements in the host rock, together with secondary dispersion halo in soils and alluvium, offers a potential geochemical exploration target. Sediment from streams near low-grade uranium occurrences in arkosic sandstone of the Denver basin, Colorado, and sediment from streams in the igneous and metamorphic terrace near the Midnite mine of eastern Washington have been analyzed for acid-extractable U, Cu,Pb, Zn, Ni, Co, Fe, Mn, Mo, Cd, Cr, Ag, V, and Se, and for total Fe, Mn, Hg, As, and organic C. The -80 mesh fraction of the alluvium downstream from a small uraniferous limonite occurrence in the Denver basin shows anomalous concentrations of U, Pb, As, Ni, Mo, V, Zn, and Se. Anomalous concentrations of U persist farther downstream (as much as 1,000 m) than any of the trace elements. In another stream system southeast of Denver, above-background levels of U, Pb, As, Zn, V, Fe, and Mn occur near a uranium anomaly (defined by other methods) which has no surface mineralization. In the Midnite mine area, sediments of streams draining prospect areas showed anomalous concentrations of uranium (as much as 10 times background), but no accompanying anomalous trace-element concentrations, although analyses of Midnite mine ores show that a broad suite of trace elements are associated with uranium.

Open-File Report↗

USGS2025

Review and synthesis of the applications of machine learning to coalbed methane recovery

Over the last 30 years, a substantial literature has evolved on the use of machine learning (ML) to assess, predict, and improve the efficiency of coalbed methane (CBM) recovery. In the United States, the production of CBM declined as shale gas production matured, but CBM continues to be an important energy resource in other parts of the world. ML applications that have the potential to improve CBM reservoir management and production forecasts, and to increase exploration and operational efficiency, are still of significant interest. The integration of geostatistical techniques into the CBM ML applications has been largely absent but represents an opportunity for improvement. The literature demonstrates the widespread interest in, and applicability of, ML algorithms applied to CBM problems, and that they continue to result in improvements in predictive performance. However, (1) much of the research is more academic than operational, (2) many results are based on simulations, or small or proprietary datasets, (3) ML performance information can be inconsistent and sometimes entirely omitted, (4) most methodologies are unique to the specific CBM situation and likely not generalizable, (5) no standard data repositories are available to directly compare the performance of competing algorithms, and (6) the spatial component is often omitted. Finally, relatively new ML protocols involving causality analysis and reinforced learning, as well as hybrid workflows combining both supervised and unsupervised learning, are anticipated to dominate the future investigations. Integration of geostatistical and geospatial analysis with ML should enhance performance.

Book chapter↗

USGS2025

Petrogenesis and mineralization potential of spinifex komatiitic basalts in the Bradley Peak greenstone terrane, Wyoming Province

Komatiitic volcanic rocks are important hosts of Ni sulfide mineralization and record early Earth evolution; however, those in the well-studied Archean Wyoming Province have received little attention. Here, we elucidate the timing and petrogenesis of the Bradley Peak komatiitic volcanic rocks using field and textural observations, geochronology, and geochemistry. Detrital and igneous zircon U-Pb ages for two samples from previously undated units support published age determinations, placing the eruption age at 2.72 Ga. Stratigraphy of the volcanic flows was mapped and 36 samples including cumulates, greenschists, and spinifex-textured rocks were collected. Whole-rock geochemistry was used to classify the spinifex-textured samples as Al-undepleted komatiitic basalts (11–17 wt% MgO). Platinum-group element concentrations (n = 25) are like those in global Al-undepleted komatiitic basalts, and PGE/Ti ratios do not indicate the volcanic flows likely host sulfide mineralization. Initial ε Nd values of −0.5 to +4.7 (n = 16), indicate that these lavas were derived from a depleted mantle source and have negligible evolved crust contamination. The primary magma to the komatiitic basalt flows is estimated to have had 19 wt% MgO and be derived from ∼15 to 25 % mantle partial melting at 3–4 GPa. Trace element chemistry and thermodynamic modeling suggest the primary melt assimilated local banded iron formation. Although the Bradley Peak komatiitic basalts do not contain positive evidence of magmatic sulfide deposits, depleted Au in the flows suggests they could be source rocks for nearby orogenic gold deposits.

Wyoming↗

USGS2024

Exploring the dynamic interactions between the Southern San Andreas Fault and a normal fault under the Salton Sea

We investigate the dynamic interactions between the Southern San Andreas Fault (SSAF) and a proximal normal fault (NF) beneath the Salton Sea in southern California. The NF, positioned near the SSAF terminus at Bombay Beach, exhibits 11–15 displacement events across 14 stratigraphic sequences, with a range of 0.2–1.4 m of vertical offset since ∼2–3 ka. Notably, four of these events may align temporally with SSAF earthquakes, raising questions about the possible interplay between the two faults. Utilizing dynamic rupture models, we analyze the coseismic interactions between the SSAF and NF, addressing under what conditions the SSAF induces slip on the NF. Our findings reveal that a suite of SSAF ruptures, particularly those propagating from north to south, can trigger slip on the normal fault and replicate observed vertical offsets. If the SSAF extends beneath the Salton Sea, earthquakes originating south of the NF intersection are less likely to trigger normal fault slip, although we cannot exclude this possibility. Some SSAF ruptures do not trigger discernible slip on the NF, rendering such events undetectable in the stratigraphic record. Our research contributes toward discussions regarding the seismic hazard in southern California, shedding light on the interplay between the SSAF and NF.

California↗

USGS2025

An exploration of the relative influence of physical models for Omori’s law

Omori’s law states that the rate of aftershocks decays as a function of inverse time. There are multiple physical explanations that we reduce into a nonlinear mixed effects relation of three terms: (1) a Rate/State expression that can account for static/dynamic and viscoelastic triggering caused directly by the mainshock, (2) a fluid diffusion triggering term, and (3) a randomized secondary triggering (cascade) term. We fit free physical-model parameters to an observed aftershock sequence through two nonlinear regression methods to find the relative contributions of physics-based models in an observed aftershock sequence. Results from both methods show that Rate/State models overpredict aftershock rates by ∼0–30%. Secondary aftershocks cause a net negative contribution (seismicity rate reduction that corrects overprediction by other terms) ranging between ∼0 and 30%. All regression solutions yield negative secondary triggering contributions without being guided to do so. A physical explanation for this is that aftershock occurrence relieves stress from the crust, ultimately causing the sequence to extinguish itself. Fluid diffusion triggering contributions range from ∼0 to 20%. Diffusion processes are observed to be shorter in time than the full duration of an aftershock sequence and they are also spatially limited, diminishing their influence. Our results apply to an aftershock decay curve from the 2016 Central Apennines earthquake sequence, meaning that our specific results may not be general. Our primary conclusion is that any one physical model cannot alone fit the observed sequence as well as the combination of three we investigated.

Frontiers in Earth Science↗

USGS2026

Tectonic implications of transitional melting regimes from petrological, geochronological, and compositional characterization of the ophiolitic Seventymile terrane, Alaska, USA

New geochemical, U-Pb geochronology, and Sr-Nd-Hf isotope data provide evidence for the tectonic evolution of the Seventymile terrane in interior Alaska, USA. Ultramafic and mafic rocks of the Seventymile terrane are thought to represent components of a dismembered ophiolite and provide unique constraints on regional terrane evolution and accretion. The Seventymile ophiolite represents fragments of the Devonian to Permian Slide Mountain Ocean (SMO) that separated allochthonous and parautochthonous continental fragments of western North America. It now occurs as multiple thrust sheets containing Permian mafic and ultramafic rocks overlying and/or possibly imbricated with amphibolite-facies supracrustal rocks of allochthonous Yukon-Tanana terrane and parautochthonous North America. Seventymile klippen contain variably serpentinized peridotite, primarily harzburgite, low-grade meta-mafic rocks, and minor oceanic sedimentary rocks (argillite, chert, limestone, and metasandstone). Mafic rocks include gabbro to diabase, typically as dikes, veinlets, or rare massive stocks intruding peridotite. Mafic rocks also include greenstones of the Seventymile assemblage in klippen structurally underlying, and in shear zone contact with, ultramafic klippen. New trace element and radiogenic isotope data from mafic magmatic rocks associated with the Seventymile ultramafic bodies show evidence for a weakly subduction-modified mantle source, like the mantle source of normal mid-ocean-ridge basalt (N-MORB) or back-arc basin basalt (BABB). Seventymile assemblage greenstones are more heterogeneous. They range from N-MORB to enriched mid-ocean-ridge basalt (E-MORB) and ocean-island basalt (OIB), with a subset of samples indicative of continental arc affinity. These geochemistry results indicate that distinct tectonic environments are represented by at least two, and possibly three, lithological and structural units comprising the Seventymile terrane. Hf-Nd isotope systematics are consistent with a depleted MORB mantle (DMM)−like component that overlaps with Pacific MORB. Primary zircon is rare, but new in situ U-Pb data for gabbro and greenstone indicate ca. 274−272 Ma peak zircon and titanite crystallization. Scattered younger zircons define a ca. 255 Ma zircon peak and correspond to secondary crystallization associated with baddeleyite reaction of high-Si fluids during low-grade metamorphism. If Seventymile suites are contemporaneous, obduction associated with the closure of the SMO resulted in the stacking of ophiolitic packages representing distinct tectonomagmatic settings across the transition from pericontinental, to epicontinental, to distal ocean back-arc. Intrusions hosted in klippe of ultramafic rocks, plus the least subduction-modified greenstones underlying them, geologically and compositionally resemble Slide Mountain rocks of the Campbell Range formation in eastern Yukon and may provide a new piercing point across the Tintina fault.

Alaska, British Columbia↗

USGS2024

Compositional and structural mapping of Northwest Africa 15507 angrite

Angrite meteorites represent interesting sampling of planetary crustal environments. Quench-textured angrites with strong crystal zoning originated from the shallow surface region, with evidence of reducing conditions during solidification. Plutonic angrites have more coarse-grained igneous and metamorphic textures with comparatively less zoning and are interpreted as having equilibrated at greater depth. Plutonic angrites contain the minerals magnetite Fe 3 O 4 comprised of Fe 2+ and Fe 3+ , and rhönite, where Fe 3+ is required by inspection of mineral stoichiometry. NWA 15507 is a plutonic angrite with a microgabbroic texture (mean grainsize ∼1.4 mm) composed of zoned Al-Ti-augite, Ca-bearing olivine, anorthite, with accessory kirschsteinite, rhönite, hercynite, low-Ni kamacite, merrillite, Ti-free magnetite and troilite [ 1 ]. Rhönite analyzed by electron-probe microanalysis (EPMA) has the formula Ca 2.04 (Mg 0.32 Fe 2+ 4.25 Fe 3+ 0.47 Ti 0.33 Al 0.61 )(Si 3.74 Al 2.26 )O 20 , where Fe 3+ was estimated by stoichiometric analysis. During preliminary cathodoluminescence (CL) analysis, complex subgrain and oscillatory zoning was observed in the anorthite. In this study we use a combined approach of electron probe microanalysis (EPMA), cathodoluminescence (CL), electron-backscatter diffraction (EBSD), and laser ablation inductively-coupled plasma mass spectrometry (LA-ICP-MS) to further investigate the anorthite and distribution of Fe 3+ in NWA 15507.

Microscopy and Microanalysis↗

USGS2025

Observing northern high-latitude river systems to understand changes in a warming Arctic

Purpose of Review Streams and rivers are undergoing rapid change as the Arctic warms and thaws. We review recent observations in Arctic stream systems to identify ubiquitous changes and the most useful tools for observing change and exploring the underlying processes. Recent Findings Recent literature indicates increasingly significant trends in river hydrology and chemistry due to persistent warming in the Arctic and longer observational records for analysis. However, regional differences in the magnitude and direction of these trends persist. We also observe thresholds in ground thaw and surface–groundwater interactions that can impact river hydrology and chemistry. Summary Warming and thaw are occurring rapidly at high latitudes, resulting in increasing, yet variable responses in stream systems across regions and scales. These differences highlight the need for long-term records and an interdisciplinary approach to explain trends and predict future states. Stream systems respond to multiple landscape changes related to hydrology (changing precipitation and subsurface flow), geology (ground thaw dynamics), and ecology (vegetation change).

Current Climate Change Reports↗

USGS2026

Per- and polyfluoroalkyl substances in waters associated with oil and gas development in the Denver Basin

Use of per- and polyfluoroalkyl substances (PFAS) in the petroleum industry could be a cause for concern due to the large volumes of produced water (PW) generated during oil and gas extraction, the reuse of these wastes in water-stressed regions, and adverse health outcomes related to PFAS exposures. However, PW PFAS characterization is nearly absent in the literature, and hydraulic fracturing (HF) chemical disclosures often omit the identities of additives as proprietary. Here we evaluate PFAS in PW samples from three petroleum wells in the Denver Basin during their first year of production. Total concentrations of targeted PFAS (Σ 40 PFAS) were < 35 ng/L in PW samples, with short-chain PFAS like perfluorobutanoic acid persisting throughout the sampled duration. Analysis of freshwater inputs for hydraulic fracturing (Σ 40 PFAS ~ 113 ng/L) and mixed fracture fluid (Σ 40 PFAS ~ 69 ng/L) indicated much of the targeted PFAS content was derived from the input water, and not from HF additives, however samples subjected to oxidation indicated the presence of PFAS precursors that would not be detected by targeted analysis. This study highlights that while PFAS content is low in the studied PWs, the potential for redistribution of PFAS in the environment may be a consideration for reuse applications.

Colorado, Nebraska, Wyoming↗

USGS2025

Using public participatory geographic information systems (PPGIS) to explore uses and values for Mojave Trails National Monument, California

Many people ascribe a variety of values to public lands and waters, but some values are more difficult to assess and quantify than others. Public participatory geographic information systems (PPGIS) are tools that have been used to help quantify and map the public’s diverse values for a landscape. This work describes the first known Office of Management and Budget–approved use of PPGIS by a Department of the Interior bureau. The U.S. Geological Survey developed an internet-based application to aid in gathering PPGIS data, called Values Mapping for Planning in Regional Ecosystems (VaMPIRE). Further, this work describes the first pilot of the VaMPIRE application in coordination with the Bureau of Land Management to collect spatial data and other survey data regarding the public’s uses of and values for locations within Mojave Trails National Monument. We emailed the link to the VaMPIRE application to an interested party email list in 2024 with 207 valid emails and received 74 responses; we also received 47 responses from members of an off-roading social media group. Of the list of 16 value options, recreation was the most popular value for the monument, followed by wilderness and inspirational. Over 1,000 points were placed throughout the monument, indicating locations people use or value, with the locations spread throughout the entire monument. Additionally, most survey respondents stated their ability to receive benefits in locations they mapped would not change in response to a hypothetical scenario related to recreational facility development. This report describes exploratory results from the first use of the VaMPIRE tool in Mojave Trails National Monument and includes reflections on how the process went and considerations for future use of VaMPIRE.

California↗

USGS2026

Selected water-quality data from the Cedar River and Cedar Rapids well fields, Cedar Rapids, Iowa, 2017–22

The Cedar River alluvial aquifer is the source of drinking water in Cedar Rapids, Iowa. Production wells are completed in the alluvial aquifer approximately 40 to 80 feet below land surface. The City of Cedar Rapids and the U.S. Geological Survey have studied the groundwater-flow system and water quality of the aquifer in the vicinity of Cedar Rapids since 1992. Results of these studies documented hydrologic conditions, water quality, and geochemistry of the alluvial aquifer and interactions with the Cedar River. Water-quality samples were collected for studies involving well field monitoring, trends, source-water protection, groundwater geochemistry, surface-water–groundwater interaction, and pesticides in groundwater and surface water. Water quality was analyzed for dissolved major ions (boron, bromide, calcium, chloride, fluoride, iron, magnesium, manganese, potassium, silica, sodium, sulfate, and total dissolved solids), dissolved nutrients (ammonia as nitrogen, ammonia plus organic nitrogen as nitrogen, nitrite plus nitrate as nitrogen, nitrite as nitrogen, orthophosphate as phosphorus, and phosphorus), dissolved organic carbon, and selected pesticides. Physical characteristics (alkalinity, dissolved oxygen, pH, specific conductance, and water temperature) were measured on site and recorded for each water sample collected. This report presents the results of routine water-quality data-collection activities from October 2017 through September 2022. Methods of data collection, quality assurance, water-quality analyses, and statistical procedures are presented. Data include the results of water-quality analyses from quarterly sampling from monitoring wells, production wells, two water treatment plants, and the Cedar River at Blairs Ferry Road at Palo, Iowa, streamgage (U.S. Geological Survey station number 05464420), as well as monthly nutrient sampling from the Cedar River and Morgan Creek near Covington, Iowa, streamgage (U.S. Geological Survey station number 05464475).

Iowa↗