Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Evolution and Development”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6Linked to original sources

Evaluation of development options for Alaska North Slope viscous and heavy oil

Current estimates of discovered viscous and heavy oil in Alaska’s North Slope are 12 billion barrels of oil-in-place and 12–18 billion barrels of oil-in-place, respectively (see Appendix 1 for conversion to SI units). Since the early 1990s to the end of 2010, cumulative viscous oil production has amounted to 150 million barrels, and there has been no commercial production of heavy oil. During the last three decades, the industry has been challenged to develop technologies to commercially produce these untapped oil resources in this Arctic environment. In this paper, the general locations and geologic properties of the viscous oil-bearing West Sak/Schrader Bluff and heavy oil-bearing Ugnu stratigraphic intervals are described first. The geologic variability within these deposits and the evolution of technology have forced an incremental development approach, requiring costly field testing at the pilot scale of innovative extraction techniques. Although viscous oil is currently produced, its development is not mature, and firms appear to be still spending large sums on new approaches to improve recovery. The analysis specifies a representative viscous oil project and then applies a “real options” framework using simulation to determine whether the risked expected project value is sufficient to fund required expenditures on extraction process research and field testing. Computations show available field test funds to be highly sensitive to the operator’s hurdle rate of return as well as the range in magnitude of potential State revenues. The contribution of the paper is solving this problem using an approach where the extreme low return and high scenarios need only be specified, and where the uncertainties are modeled with beta distributions based on historical data or expert opinion.

Alaska↗

Using high sample rate lidar to measure debris-flow velocity and surface geometry

Debris flows evolve in both time and space in complex ways, commonly starting as coherent failures but then quickly developing structures such as roll waves and surges. These processes are readily observed but difficult to study or quantify because of the speed at which they evolve. Many methods for studying debris flows consist of point measurements (e.g., flow height or basal stresses), which are inherently limited in spatial coverage and cannot fully characterize the spatiotemporal evolution of a flow. In this study, we use terrestrial lidar to measure debris-flow profiles at high sampling rates to examine debris-flow movement with high temporal and spatial precision and accuracy. We acquired measurements during gate-release experiments at the U.S. Geological Survey debris-flow flume, a unique experimental facility where debris flows can be artificially generated at a large scale. A lidar scanner was used to record repeat topographic profiles of the moving debris flows along the length of the flume with a narrow swath width (∼1 mm) at a rate of 60 Hz. The high-resolution lidar profiles enabled us to quantify flow front velocity of the debris flows and provided an unprecedented record of the development and evolution of the flow structure with a sub-second time resolution. The findings of this study demonstrate how to obtain quantitative measurements of debris-flow movement. In addition, the data help us to quantitatively define the development of a saltating debris-flow front and roll waves behind the debris-flow front. Such measurements may help constrain future modeling efforts.

Environmental and Engineering Geoscience↗

Modeling the evolution of channel shape: Balancing computational efficiency with hydraulic fidelity

The cross-sectional shape of a natural river channel controls the capacity of the system to carry water off a landscape, to convey sediment derived from hillslopes, and to erode its bed and banks. Numerical models that describe the response of a landscape to changes in climate or tectonics therefore require formulations that can accommodate evolution of channel cross-sectional geometry. However, fully two-dimensional (2-D) flow models are too computationally expensive to implement in large-scale landscape evolution models, while available simple empirical relationships between width and discharge do not adequately capture the dynamics of channel adjustment. We have developed a simplified 2-D numerical model of channel evolution in a cohesive, detachment-limited substrate subject to steady, unidirectional flow. Erosion is assumed to be proportional to boundary shear stress, which is calculated using an approximation of the flow field in which log-velocity profiles are assumed to apply along vectors that are perpendicular to the local channel bed. Model predictions of the velocity structure, peak boundary shear stress, and equilibrium channel shape compare well with predictions of a more sophisticated but more computationally demanding ray-isovel model. For example, the mean velocities computed by the two models are consistent to within ???3%, and the predicted peak shear stress is consistent to within ???7%. Furthermore, the shear stress distributions predicted by our model compare favorably with available laboratory measurements for prescribed channel shapes. A modification to our simplified code in which the flow includes a high-velocity core allows the model to be extended to estimate shear stress distributions in channels with large width-to-depth ratios. Our model is efficient enough to incorporate into large-scale landscape evolution codes and can be used to examine how channels adjust both cross-sectional shape and slope in response to tectonic and climatic forcing. Copyright 2008 by the American Geophysical Union.

Journal of Geophysical Research F: Earth Surface↗

Riparian vegetation recovery patterns following stream channelization: A geomorphic perspective

Hundreds of kilometres of West Tennessee streams have been channelized since the turn of the century. After a stream is straightened, dredged, or cleared, basinwide ecologic, hydrologic, and geomorphic processes bring about an integrated, characteristic recovery sequence. The rapid pace of channel responses to channelization provides an opportunity to document and interpret vegetation recovery patterns relative to otherwise long—term, concomitant evolution of river geomorphology. Nearly 150 sites along 15 streams were studied in the Obion, Forked Deer, Hatchie, and Wolf River basins. Channels of these streams, except that of the Hatchie River main stem, have undergone major modifications along all or parts of their courses. This paper presents the eco—geomorphic analyses and interpretation of a large multidisciplinary study, with special reference to their interrelated hydrogeomorphic aspects of channel recovery. Quantitative plant ecological analyses were conducted to infer relative bank stability, to identify indicator recovery species, and to determine patterns of vegetation development through the course of accelerated channel evolution. Binary—discriminant and ordination analyses show that distinctive riparian—species patterns reflect a six—stage model of channel evolution and can be used to infer channel stability and hydrogeomorphic conditions. Woody vegetation initially establishes on low— and mid—bank surfaces at the same location and time that bank accretion begins, and corresponds to the site of initial geomorphic restabilization. The linkage of channel bed aggradation, woody vegetation establishment, and bank accretion all lead to recovery of the channel. Pioneer species are hardy and fast growing, and can tolerate moderate amounts of slope instability and sediment deposition; these species include river birch (Betula nigra), black willow (Salix nigra), boxelder (Acer negundo), and silver maple (Acer saccharinum). High stem densities and root—mass development appear to enhance bank stability. Tree—ring analyses suggest that on average 65 yr may be required for recovery after channelization.

Ecology↗

Neogene faulting, basin development, and relief generation in the southern Klamath Mountains (USA)

Development and evaluation of models for tectonic evolution in the Cascadia forearc require understanding of along-strike heterogeneity of strain distribution, uplift, and upper-plate characteristics. Here, we investigated the Neogene geologic record of the Klamath Mountains province in southernmost Cascadia and obtained apatite (U-Th)/He (AHe) thermochronology of Mesozoic plutons, Neogene graben sediment thickness, detrital zircon records from Neogene grabens, gravity and magnetic data, and kinematic analysis of faults. We documented three aspects of Neogene tectonics: early Miocene and younger rock exhumation, development of topographic relief sufficient to isolate Neogene graben-filling sediments from sources outside of the Klamath Mountains, and initiation of mid-Miocene or younger right-lateral and reverse faulting. Key findings are: (1) 10 new apatite AHe mean cooling ages from the Canyon Creek and Granite Peak plutons in the Trinity Alps range from 24.7 ± 2.1 Ma to 15.7 ± 2.1 Ma. Inverse thermal modeling of these data and published apatite fission-track ages indicate the most rapid rock cooling between ca. 25 and 15 Ma. One new AHe mean cooling age (26.7 ± 3.2 Ma) from the Ironside Mountain batholith 40 km west of the Trinity Alps, combined with previously published AHe ages, suggests geographically widespread latest Oligocene to Miocene cooling in the southern Klamath Mountains province. (2) AHe ages of 39.4 ± 5.1 Ma on the downthrown side and 22.7 ± 3.0 Ma on the upthrown side of the Browns Meadow fault suggest early Miocene to younger fault activity. (3) U-Pb detrital zircon ages ( n = 862) and Lu-Hf isotope geochemistry from Miocene Weaverville Formation sediments in the Weaverville, Lowden Ranch, Hayfork, and Hyampom grabens south and southwest of the Trinity Alps can be traced to entirely Klamath Mountains sources; they suggest the south-central Klamath Mountains had, by the middle Miocene, sufficient relief to isolate these grabens from more distal sediment sources. (4) Two Miocene detrital zircon U-Pb ages of 10.6 ± 0.4 Ma and 16.7 ± 0.2 Ma from the Lowden Ranch graben show that the maximum depositional age of the upper Weaverville Formation here is younger than previously recognized. (5) A prominent steep-sided negative gravity anomaly associated with the Hayfork graben shows that both the north and south margins are fault-controlled, and inversion of gravity data suggests basin fill is between 1 km and 1.9 km thick. Abrupt elevation changes of basin fill-to-bedrock contacts reported in well logs record E-side-up and right-lateral faulting at the eastern end of the Hayfork graben. A NE-striking gravity gradient separates the main graben on the west from a narrower, thinner basin to the east, supporting this interpretation. (6) Of fset of both the base of the Weaverville Formation and the cataclasite-capped La Grange fault surface by a fault on the southwest margin of the Weaverville basin documents 200 m of reverse and 1500 m of right-lateral strike-slip motion on this structure, here named the Democrat Gulch fault; folded and steeply dipping strata adjacent to the fault confirm that faulting postdated deposition of the Weaverville Formation.

California, Oregon↗

Coral reef evolution on rapidly subsiding margins

A series of well-developed submerged coral reefs are preserved in the Huon Gulf (Papua New Guinea) and around Hawaii. Despite different tectonics settings, both regions have experienced rapid subsidence (2-6??m/ka) over the last 500??ka. Rapid subsidence, combined with eustatic sea-level changes, is responsible for repeated drowning and backstepping of coral reefs over this period. Because we can place quantitative constraints on these systems (i.e., reef drowning age, eustatic sea-level changes, subsidence rates, accretion rates, basement substrates, and paleobathymetry), these areas represent unique natural laboratories for exploring the roles of tectonics, reef accretion, and eustatic sea-level changes in controlling the evolution of individual reefs, as well as backstepping of the entire system. A review of new and existing bathymetric, radiometric, sedimentary facies and numerical modeling data indicate that these reefs have had long, complex growth histories and that they are highly sensitive, recording drowning not only during major deglaciations, but also during high-frequency, small-amplitude interstadial and deglacial meltwater pulse events. Analysis of five generalized sedimentary facies shows that reef drowning is characterized by a distinct biological and sedimentary sequence. Observational and numerical modeling data indicate that on precessional (20??ka) and sub-orbital timescales, the rate and amplitude of eustatic sea-level changes are critical in controlling initiation, growth, drowning or sub-aerial exposure, subsequent re-initiation, and final drowning. However, over longer timescales (> 100-500??ka) continued tectonic subsidence and basement substrate morphology influence broad scale reef morphology and backstepping geometries. Drilling of these reefs will yield greatly expanded stratigraphic sections compared with similar reefs on slowly subsiding, stable and uplifting margins, and thus they represent a unique archive of sea-level and climate changes, as well as a record of the response of coral reefs to these changes over the last six glacial cycles. ?? 2008 Elsevier B.V. All rights reserved.

Global and Planetary Change↗

Representing the acquisition and use of energy by individuals in agent-based models of animal populations

1. Agent-based models (ABMs) are widely used to predict how populations respond to changing environments. As the availability of food varies in space and time, individuals should have their own energy budgets, but there is no consensus as to how these should be modelled. Here, we use knowledge of physiological ecology to identify major issues confronting the modeller and to make recommendations about how energy budgets for use in ABMs should be constructed. 2. Our proposal is that modelled animals forage as necessary to supply their energy needs for maintenance, growth and reproduction. If there is sufficient energy intake, an animal allocates the energy obtained in the order: maintenance, growth, reproduction, energy storage, until its energy stores reach an optimal level. If there is a shortfall, the priorities for maintenance and growth/reproduction remain the same until reserves fall to a critical threshold below which all are allocated to maintenance. Rates of ingestion and allocation depend on body mass and temperature. We make suggestions for how each of these processes should be modelled mathematically. 3. Mortality rates vary with body mass and temperature according to known relationships, and these can be used to obtain estimates of background mortality rate. 4. If parameter values cannot be obtained directly, then values may provisionally be obtained by parameter borrowing, pattern-oriented modelling, artificial evolution or from allometric equations. 5. The development of ABMs incorporating individual energy budgets is essential for realistic modelling of populations affected by food availability. Such ABMs are already being used to guide conservation planning of nature reserves and shell fisheries, to assess environmental impacts of building proposals including wind farms and highways and to assess the effects on nontarget organisms of chemicals for the control of agricultural pests.

Methods in Ecology and Evolution↗

Integration of geological remote-sensing techniques in subsurface analysis

Geological remote sensing is defined as the study of the Earth utilizing electromagnetic radiation which is either reflected or emitted from its surface in wavelengths ranging from 0.3 micrometre to 3 metres. The natural surface of the Earth is composed of a diversified combination of surface cover types, and geologists must understand the characteristics of surface cover types to successfully evaluate remotely-sensed data. In some areas landscape surface cover changes throughout the year, and analysis of imagery acquired at different times of year can yield additional geological information. Integration of different scales of analysis allows landscape features to be effectively interpreted. Interpretation of the static elements displayed on imagery is referred to as an image interpretation. Image interpretation is dependent upon: (1) the geologist's understanding of the fundamental aspects of image formation, and (2.) his ability to detect, delineate, and classify image radiometric data; recognize radiometric patterns; and identify landscape surface characteristics as expressed on imagery. A geologic interpretation integrates surface characteristics of the landscape with subsurface geologic relationships. Development of a geologic interpretation from imagery is dependent upon: (1) the geologist's ability to interpret geomorphic processes from their static surface expression as landscape characteristics on imagery, (2) his ability to conceptualize the dynamic processes responsible for the evolution 6f interpreted geologic relationships (his ability to develop geologic models). The integration of geologic remote-sensing techniques in subsurface analysis is illustrated by development of an exploration model for ground water in the Tucson area of Arizona, and by the development of an exploration model for mineralization in southwest Idaho.

Open-File Report↗

Real-time monitoring of debris-flow velocity and mass deformation from field experiments with high sample rate lidar and video

Debris flows evolve in both time and space in complex ways, commonly starting as coherent failures but then quickly developing structures such as roll waves and surges. This process is readily observed, but difficult to study or quantify because of the speed at which it occurs. Many methods for studying debris flows consist of point measurements (e.g., of flow height or basal stresses), which are inherently limited in spatial coverage and fail to fully capture the spatiotemporal evolution of a flow. In this study, we use a terrestrial lidar to measure debris-flow profiles at high sample rates to examine debris-flow movement with high temporal and spatial precision and accuracy. We acquired measurements during gate-release experiments at the USGS debris flume, a unique experimental facility where debris flows can be simulated at a large scale. In this study, the laser scanner was placed at the bottom of the steep flume and recorded topography of the entire flume bed and debris flow at a rate of 60 Hz along a very narrow profile (~1mm in width), providing a detailed, two-dimensional cross-section of the debris flow through time. The high-resolution profiles enable us to quantify flow front and surge velocities of the debris flow and provide an unprecedented record of the development and evolution of the flow structure over time. The profiles also preserve a record of the highly variable deposition pattern of the debris flow on a downstream fan with a time resolution of hundredths of a second. In addition, video imagery from the experiment was used to track debris flow movement through time. By acquiring high-resolution topographic data and video imagery during a controlled experiment, we have been able to obtain unusually complete quantitative measurements of debris-flow movement. Such measurements may help constrain future modeling efforts.

Conference Paper↗

CHANNEL EVOLUTION IN MODIFIED ALLUVIAL STREAMS.

This study (a) assesses the channel changes and network trends of bed level response after modifications between 1959 and 1972 of alluvial channels in western Tennessee and (b) develops a conceptual model of bank slope development to qualitatively assess bank stability and potential channel widening. A six-step, semiquantitative model of channel evolution in disturbed channels was developed by quantifying bed level trends and recognizing qualitative stages of bank slope development. Development of the bank profile is defined in terms of three dynamic and observable surfaces: (a) vertical face (70 to 90 degrees), (b) upper bank (25 to 50 degrees), and (c) slough line (20 to 25 degrees).

Transportation Research Record↗

Lava flow emplacement dynamics during the Mauna Loa 2022 eruption

On November 27, 2022, Mauna Loa erupted for the first time in 38 years, threatening a major highway on the Island of Hawaiʻi. The opening phases of the eruption were focused at the volcano’s summit, before magma propagated into the upper Northeast Rift Zone to erupt at four fissure segments that localized at fissure 3 by December 2. This fissure produced a braided ʻaʻā flow that traversed the steep north flank at >1 km/hr, before slowing as slopes shallowed. Effusion rates peaked in the early hours of the eruption and then steadied at around 100 m3/s at fissure 3. Lava effusion became variable and dropped abruptly on December 7. The eruption ended on December 10 with a final flow length of 18 km. We tracked lava effusion rates, flow advance, channel dynamics, and 3-D flow field development with field and remote sensing observations throughout this eruption to inform lava flow forecasts and investigate ʻaʻā flow dynamics. Flows were mapped using optical and infrared imagery, uncrewed aircraft systems, and airborne single-pass InSAR. Video- and time-lapse cameras were deployed to record lava fountaining and channelized flow at frequent intervals, supplemented by field measurements. Analyses of these data built a detailed record of effusion rates and associated flow dynamics. We combine these high frequency observations of the proximal flow field with broader thermal and 3-D mapping of the evolution in the medial and distal flow field to examine ʻaʻā flow dynamics from source to toe. Within the steep, medial section of the flow field, channel blockages caused back-ups and overflows as the eruption progressed. Disrupted lava supply to the distal flow field and low slopes resulted in stalling, widening, and thickening at the toe. Overall, 142 million m3 of lava covered 36 km2 over 13 days. Our results inform the controls on development and evolution of lava flow fields, with implications for forecasting primary flow advance and secondary flow field growth.

Hawaii↗

Petrologic insights into basaltic volcanism at historically active Hawaiian volcanoes

Study of the petrology of Hawaiian volcanoes, in particular the historically active volcanoes on the Island of Hawai‘i, has long been of worldwide scientific interest. When Dr. Thomas A. Jaggar, Jr., established the Hawaiian Volcano Observatory (HVO) in 1912, detailed observations on basaltic activity at Kīlauea and Mauna Loa volcanoes increased dramatically. The period from 1912 to 1958 saw a gradual increase in the collection and analysis of samples from the historical eruptions of Kīlauea and Mauna Loa and development of the concepts needed to evaluate them. In a classic 1955 paper, Howard Powers introduced the concepts of magnesia variation diagrams, to display basaltic compositions, and olivine-control lines, to distinguish between possibly comagmatic and clearly distinct basaltic lineages. In particular, he and others recognized that Kīlauea and Mauna Loa basalts must have different sources. Subsequent years saw a great increase in petrologic data, as the development of the electron microprobe made it possible to routinely monitor glass and mineral compositions, in addition to bulk rock compositions. We now have 100 years’ worth of glass compositions for Kīlauea summit eruptions, which, together with expanding databases on prehistoric tephras, provide important constraints on the nature of Kīlauea’s summit reservoir. A series of chemically distinctive eruptions in the 1950s and 1960s facilitated evaluation of magma mixing and transport processes at Kīlauea. At Mauna Loa, lava compositions are distinctive only at the trace element level, suggesting that its summit reservoir is better mixed than Kīlauea’s. Most summit lavas at both volcanoes, however, lie on olivine control lines having the same olivine composition (Fo 86–87 ). Study of the ongoing East Rift Zone eruption at Kīlauea has further illuminated the complexity of magma storage, resupply, and mixing along this very active rift zone. Studies of active and closed-system lava lakes have been part of HVO’s efforts since Jaggar’s unique descriptions of the Halema‘uma‘u lava lake that existed before 1924. Detailed study of closed-system bodies, including the 1959 Kīlauea Iki, 1963 ‘Alae, and 1965 and prehistoric Makaopuhi lava lakes and the Uēkahuna laccolith, have allowed recognition and quantification of processes of basalt differentiation. Specific topics reviewed herein include the occurrence of segregation veins and related structures, overall cooling history, and patterns of crystallization and reequilibration of olivine in various lava lakes. In recent decades, study of the submarine slopes of the Island of Hawai‘i and of Lō‘ihi Seamount has revolutionized our understanding of the early history of Hawaiian volcanoes. Observations of Lō‘ihi lavas first established the existence of an early alkalic stage in the evolution of Hawaiian volcanoes. Stages of volcanic development from inception to tholeiitic shield building can be observed in Kīlauea’s submarine and subaerial sections. One distinctive feature of submarine volcanics at Kīlauea, Mauna Loa, and Hualālai is that picritic lavas are more abundant than in subaerial eruptions. Also, olivine compositions of submarine lavas are more magnesian, ranging from Fo 88 at Kīlauea to Fo 89 at Hualālai. The most magnesian glasses known from Kīlauea (MgO=14.7–15.0 weight percent) were found along the submarine part of Kīlauea’s East Rift Zone. Contributions to our knowledge of the nature of the mantle source(s) of Hawaiian basalts are reviewed briefly, although this is a topic where debate is ongoing. Finally, our accumulated petrologic observations impose constraints on the nature of the summit reservoirs at Kīlauea and Mauna Loa, specifically whether the summit chamber has been continuous or segmented during past decades.

Hawaii↗

Late Pleistocene through Holocene landscape evolution of the White River Badlands, South Dakota

Badlands are common arid and semiarid landscapes long recognized in slope development and erosion rate studies by preeminent geomorphologists including Gilbert, Davis, and Schumm. The trip described here will examine in detail Quaternarystrata and landscape evolution in arguably the most famous badlands, the White River Badlands of South Dakota, which were pivotal during development of vertebrate paleontology in North America. Geologists have collected fossils from the White River Group there nearly every field season since the mid-1800s; however, until recently, little work was reported on the extensively exposed Quaternary strata. The White River Badlands are also a proposed dust source for the widespread PeoriaLoess of the Central Great Plains. The research highlighted on this trip includes (1) luminescence and radiocarbon ages from late Pleistocene through Holocene eolian sand, (2) radiocarbon ages from Holocene eolian cliff-top deposits, (3) luminescenceages from late Pleistocene fluvial silts, (4) radiocarbon ages of late Holocene fluvial silts, and (5) cosmogenic ages on ventifacts from the adjoining upper prairie. These new studies will facilitate discussions, including (1) late Quaternary paleoenvironments,(2) late Quaternary fluvial incision rates and episodes, (3) up-wind sediment supply of late Quaternary nonglaciogenic loess, (4) landscape evolution spanning late Pleistocene tableland through late Holocene sod table development, and (5) modern erosion-pedimentation rates.

South Dakota↗

The interactions between vegetation and erosion: new directions for research at the interface of ecology and geomorphology

Vegetation and processes of erosion and deposition are interactive. An objective of this paper is to review selected studies that emphasize the interdependencies. The reviews suggest new directions for research uniting ecology and geomorphology – the sub‐discipline of biogeomorphology. The research, which recently has become vigorous, includes the sources, movement, and fates of fluvial loads of sediment, organic carbon, nutrients, contaminants, and woody debris to low‐energy storage sites; the function of biota in causing soil evolution, stability, and sequestration of carbon; the development of new methods to characterize watersheds based on edaphic conditions; and the refinement of current empirical and conceptual models and dendrochronological techniques to measure landscape change. These well acknowledged topics and others less well anticipated ensure that biogeomorphology will remain vibrant.

Earth Surface Processes and Landforms↗

Growth and erosion of volcanic islands since 1963 analyzed by multi-sensor satellite data and historical records

Most volcanic activity is taking place in the oceans. Depending on water depth, eruption recurrence times and volumes, a new island can form. The power of erosional forces, the type of erupted material and the efficiency of secondary processes determine the island’s lifetime. Since the famous eruption of Surtsey (Iceland) in 1963, at least another 23 volcanic islands have appeared. Some islands remained intact for years or decades, whereas others disappeared within just weeks or months. In this study, we analyzed satellite data to determine growth and erosion rates of the volcanic edifices related to these 24 islands. We combined multi-sensor (optical, thermal, radar) satellite data time series with information from literature and the Global Volcanism Program database. We developed a comprehensive dataset, including 19 parameters, on the islands’ lifetime, shape, area, volume, eruption style and duration, environmental conditions, development of sedimentary deposits, and the geomorphic evolution of the island over time. Our dataset is available in a database format. This database allows us to test eight hypotheses about factors influencing the islands’ lifetime. Our results show that instead of one single critical factor, a combination of different factors influences the life history of volcanic islands. For instance, we show that larger islands do not necessarily live longer. The mechanical properties of the eruption products affect the island’s structural integrity. Irrespective of the material, a minimum initial area of around 50,000 m 2 seems to be a reasonable threshold to give the island a chance to exist longer.

Bulletin of Volcanology↗

Loess studies in central United States: Evolution of concepts

Few words in the realm of earth science have caused more debate than "loess". It is a common term that was first used as a name of a silt deposit before it was defined in a scientific sense. Because this "loose" deposit is easily distinguished from other more coherent deposits, it was recognized as a matter of practical concern and later became the object of much scientific scrutiny. Loess was first recognized along the Rhine Valley in Germany in the 1830s and was first noted in the United States in 1846 along the lower Mississippi River where it later became the center of attention. The use of the name eventually spread around the world, but its use has not been consistently applied. Over the years some interpretations and stratigraphic correlations have been validated, but others have been hotly contested on conceptual grounds and semantic issues. The concept of loess evolved into a complex issue as loess and loess-like deposits were discovered in different parts of the US. The evolution of concepts in the central US developed in four indefinite stages: the eras of (1) discovery and development of hypotheses, (2) conditional acceptance of the eolian origin of loess, (3) "bandwagon" popularity of loess research, and (4) analytical inquiry on the nature of loess. Toward the end of the first era around 1900, the popular opinion on the meaning of the term loess shifted from a lithological sense of loose silt to a lithogenetic sense of eolian silt. However, the dual use of the term fostered a lingering skepticism during the second era that ended in 1944 with an explosion of interest that lasted for more than a decade. In 1944, R.J. Russell proposed and H.N. Fisk defended a new non-eolian, property-based, concept of loess. The eolian advocates reacted with surprise and enthusiasm. Each side used constrained arguments to show their view of the problem, but did not examine the fundamental problem, which was not in the proofs of their hypothesis, but in the definition of the term. Between 1944 and about 1950, the debates about loess reached a maximum level of complexity. The main semantic problem was submersed in peripheral arguments about physical properties and genetic interpretations. The scholarly treatment of the subject by Fisk and Russell stimulated quality responses from a diversity of earth scientists interested in academic and applied studies, particularly geo-history, pedology, soil mechanics and stratigraphy. The long-lasting popularity of loess studies during the bandwagon era lasted to about 1970. By that time, the analytical and technical interests had attracted the mainstream into the fourth era with a focus beyond the old arguments. Although Fisk and Russell found themselves defending an unpopular theory, they stimulated a scientific interest in the late Quaternary history of the Mississippi Valley that may never be exceeded.

Engineering Geology↗

Sand deposition in the Colorado River in the Grand Canyon from flooding of the Little Colorado River

Methods for computing the volume of sand deposited in the Colorado River in Grand Canyon National Park by floods in major tributaries and for determining redistribution of that sand by main-channel flows are required for successful management of sand-dependent riparian resources. We have derived flow, sediment transport, and bed evolution models based on a gridded topography developed from measured channel topography and used these models to compute deposition in a short reach of the river just downstream from the Little Colorado River, the largest tributary in the park. Model computations of deposition from a Little Colorado River flood in January 1993 were compared to bed changes measured at 15 cross sections. The total difference between changes in cross-sectional area due to deposition computed by the model and the measured changes was 6%. A wide reach with large areas of recirculating flow and large depressions in the main channel accumulated the most sand, whereas a reach with similar planimetric area but a long, narrow shape and relatively small areas of recirculating flow and small depressions in the main channel accumulated only about a seventh as much sand. About 32% of the total deposition was in recirculation zones, 65% was in the main channel, and 3% was deposited along the channel margin away from the recirculation zone. Overall, about 15% of the total input of sand from this Little Colorado River flood was deposited in the first 3 km below the confluence, suggesting that deposition of the flood-derived material extended for only several tens of kilometers downstream from the confluence.

Water Resources Research↗

The late Cenozoic evolution of the Tuolumne River, central Sierra Nevada, California

Erosional remnants of volcanic rock deposited in a lO-m.y.-old channel of the Tuolumne River permit its partial reconstruction. Projection of the reconstructed channel west to the Central Valley and east to the range crest, together with several assumptions about the position of the hinge line and changes in channel gradient, allows estimates of the amount of uplift at the range crest during the past 10 m.y. At Tioga Pass, this amounts to as much as 1,830 m, as compared to the 2,150 m estimated in an earlier study for Deadman Pass at the San Joaquin River 30 km to the south. Comparison of the geometry of these river systems leads to the conclusion that 10 m.y. ago an ancestral range of hills occupied the present site of the Sierran crest, and, although of relatively moderate relief, it was a barrier to westward drainage even before late Cenozoic uplift. At that time, the San Joaquin River was apparently the only river flowing westward across the range from well south of Mount Whitney north to Sonora Pass. The Tuolumne River evidently never extended east of this range. Comparison of the ancient channel with the modern channel of the Tuolumne River permits analysis of the later evolution of the river system and the development of Hetch Hetchy Valley and the Grand Canyon of the Tuolumne. At Rancheria Mountain, where the volcanic "dam" in the ancient channel was highest, the river was forced to shift laterally southward around the dam and adjacent to the volcanic infilling, and start its new channel in granitic bedrock. Near Rancheria Mountain, as much as 1,525 m of new channel incision has taken place in the past 10 m.y., and the modern channel is about 915 m lower than the abandoned channel. An undetermined amount of this downcutting was from glacial erosion. The Tuolumne river system provides no direct evidence for timing the onset of uplift, but the shape of the lO-m.y.-old channel at Rancheria Mountain suggests that uplift had been underway for some time before the volcanic infilling. This timing is compatible with evidence from the upper San Joaquin River. Hetch Hetchy Valley on the Tuolumne is a much "fresher" glaciated valley than is Yosemite Valley. Hetch Hetchy was filled to the brim with glacial ice as recently as 15,000-20,000 yr ago (Tioga glaciation), whereas Yosemite Valley probably has not been filled for 750,000 yr or more (Sherwin glaciation). Thus the upper reaches of Yosemite Valley cliffs have been shaped by spalling rather than by glacial scour and are much more irregular than those in Hetch Hetchy.

California↗