Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Earth's Future”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

826 records · Page 6Linked to original sources
USGS2025

An exploration of the relative influence of physical models for Omori’s law

Omori’s law states that the rate of aftershocks decays as a function of inverse time. There are multiple physical explanations that we reduce into a nonlinear mixed effects relation of three terms: (1) a Rate/State expression that can account for static/dynamic and viscoelastic triggering caused directly by the mainshock, (2) a fluid diffusion triggering term, and (3) a randomized secondary triggering (cascade) term. We fit free physical-model parameters to an observed aftershock sequence through two nonlinear regression methods to find the relative contributions of physics-based models in an observed aftershock sequence. Results from both methods show that Rate/State models overpredict aftershock rates by ∼0–30%. Secondary aftershocks cause a net negative contribution (seismicity rate reduction that corrects overprediction by other terms) ranging between ∼0 and 30%. All regression solutions yield negative secondary triggering contributions without being guided to do so. A physical explanation for this is that aftershock occurrence relieves stress from the crust, ultimately causing the sequence to extinguish itself. Fluid diffusion triggering contributions range from ∼0 to 20%. Diffusion processes are observed to be shorter in time than the full duration of an aftershock sequence and they are also spatially limited, diminishing their influence. Our results apply to an aftershock decay curve from the 2016 Central Apennines earthquake sequence, meaning that our specific results may not be general. Our primary conclusion is that any one physical model cannot alone fit the observed sequence as well as the combination of three we investigated.

Frontiers in Earth Science↗
USGS2024

RegionGrow3D: A deterministic analysis for characterizing discrete three-dimensional landslide source areas on a regional scale

Regional-scale characterization of shallow landslide hazards is important for reducing their destructive impact on society. These hazards are commonly characterized by (a) their location and likelihood using susceptibility maps, (b) landslide size and frequency using geomorphic scaling laws, and (c) the magnitude of disturbance required to cause landslides using initiation thresholds. Typically, this is accomplished through the use of inventories documenting the locations and triggering conditions of previous landslides. In the absence of comprehensive landslide inventories, physics-based slope stability models can be used to estimate landslide initiation potential and provide plausible distributions of landslide characteristics for a range of environmental and forcing conditions. However, these models are sometimes limited in their ability to capture key mechanisms tied to discrete three-dimensional (3D) landslide mechanics while possessing the computational efficiency required for broad-scale application. In this study, the RegionGrow3D (RG3D) model is developed to broadly simulate the area, volume, and location of landslides on a regional scale (≥1,000 km 2 ) using 3D, limit-equilibrium (LE)-based slope stability modeling. Furthermore, RG3D is incorporated into a susceptibility framework that quantifies landsliding uncertainty using a distribution of soil shear strengths and their associated probabilities, back-calculated from inventoried landslides using 3D LE-based landslide forensics. This framework is used to evaluate the influence of uncertainty tied to shear strength, rainfall scenarios, and antecedent soil moisture on potential landsliding and rainfall thresholds over a large region of the Oregon Coast Range, USA.

Journal of Geophysical Research: Earth Surface↗
USGS2026

Dynamic drainage reorganization in Eastern Tibet: Insights from the Yangtze River first bend

The modern drainage network of eastern Tibet is widely believed to have developed through a series of river capture and flow reversal events; however, the timing and mechanisms driving this reorganization remain contentious. Among these events, the river capture that formed the First Bend of the Yangtze River (YFB) stands out as both iconic and particularly debated. Here we present sedimentary provenance data from the Late Miocene–Quaternary Dali Basin, located south of the YFB, which indicate that a southward-flowing Jinsha River (i.e., the present-day upper Yangtze River) sourced sediment to the Dali basin at ∼7.4–6.4 Ma in a drainage configuration different from that of today. Because this interval postdates the initial establishment of a near-modern Jinsha River system prior to the Miocene, our results imply at least two discrete fluvial reorganizations occurred at the YFB—one preceding ∼7.4 Ma and another following ∼6.4 Ma. By integrating these findings with landscape evolution modeling, we infer that the initiation of rapid uplift of the Yulong-Haba Mountains and the Diancang Shan may have been responsible for these drainage reorganizations. These results underscore that Cenozoic drainage systems on the eastern Tibetan Plateau have evolved dynamically on a short timescale of ∼10 5 –10 6 -year, rather than remaining in a long-term stationary configuration on ∼10 7 -year timescales.

eastern Tibetan Plateau, first bend of the Yangtze↗
USGS2025

Characterizing the scale of regional landslide triggering from storm hydrometeorology

Rainfall strongly affects landslide triggering; however, understanding how storm characteristics relate to the severity of landslides at the regional scale has thus far remained unclear, despite the societal benefits that would result from defining this relationship. As mapped landslide inventories typically cover a small region relative to a storm system, here we develop a dimensionless index for landslide-inducing rainfall, A * , based on extremes of modeled soil water relative to its local climatology. We calibrate A * using four landslide inventories, comprising over 11 000 individual landslides over four unique storm events, and find that a common threshold can be applied to estimate regional shallow-landslide-triggering potential across diverse climatic regimes in California (USA). We then use the spatial distribution of A * , along with topography, to calculate the landslide potential area (LPA) for nine landslide-inducing storm events over the past 20 years, and we test whether atmospheric metrics describing the strength of landfalling storms, such as integrated water vapor transport, correlate with the magnitude of hazardous landslide-inducing rainfall. We find that although the events with the largest LPA do occur during exceptional atmospheric river (AR) storms, the strength of landfalling atmospheric rivers does not scale neatly with landslide potential area, and even exceptionally strong ARs may yield minimal landslide impacts. Other factors, such as antecedent soil moisture driven by storm frequency and mesoscale precipitation features within storms, are instead more likely to dictate the patterns of landslide-generating rainfall throughout the state.

California↗
USGS2025

A high-resolution 3-D P-wave velocity structure of the south-central Cascadia subduction zone from wide-angle shore-crossing seismic refraction data

This study addresses a significant gap in understanding the features of the south-central Cascadia subduction zone, a region characterized by complex geologic, tectonic, and seismic transitions both offshore and onshore. Unlike other segments along this margin, this area lacks a 3-D velocity model to delineate its structural and geological features on a fine scale. To address this void, we developed a high-resolution 3-D P-wave velocity model using active source seismic data from ship-borne seismic shots recorded on temporary and permanent onshore seismic stations and ocean-bottom seismometers. Our model shows velocity variations across the region with distinct velocity-depth profiles for the Siletz, Franciscan, and Klamath terranes in the overlying plate. We identified seaward dipping high-velocity static backstops associated with the Siletz and Klamath terranes, situated near the shoreline and further inland, respectively. Regions of reduced crustal velocity are associated with crustal faults. Moreover, there is significant along-strike depth variation in the subducting slab, which is about 4 km deeper near the thick, dense Siletz terrane and becomes shallower near the predominantly less-dense Franciscan terrane. This highlights a sudden tectonic and geologic transition at the southern boundary of the Siletz terrane. Our velocity model also indicates slightly increased hydration, though still minimal, in both the oceanic crust and the upper mantle of the subducting plate compared to other parts of the margin.

British Columbia, California, Oregon, Washington↗
USGS2025

False positives in the identification of dynamic earthquake triggering

Dynamic earthquake triggering is commonly identified through the temporal correlation between increased seismicity rates and global earthquakes that are possible triggering events. However, correlation does not imply causation. False positives may occur when unrelated seismicity rate changes coincidently occur at around the time of candidate triggers. We investigate the expected false positive rate in Southern California with global M ≥ 6 earthquakes as candidate triggers. We compute the false positive rate by applying the statistical tests used by DeSalvio and Fan (2023), https://doi.org/10.1029/2023jb026487 to synthetic earthquake catalogs with no real dynamic triggering. We find a false positive rate of ∼3.5%–8.5% when realistic earthquake clustering is present, consistent with the 95% confidence typically used in seismology. However, when this false positive rate is applied to the tens of thousands of spatial-temporal windows in Southern California tested in DeSalvio and Fan (2023), https://doi.org/10.1029/2023jb026487 , thousands of false positives are expected. The expected false positive occurrence is large enough to explain the observed apparent triggering following 70% of large global earthquakes (DeSalvio & Fan, 2023, https://doi.org/10.1029/2023jb026487 ), without requiring any true dynamic triggering. Aside from the known triggering from the nearby El Mayor-Cucapah, Mexico, earthquake, the spatial and temporal characteristics of the reported triggering are indistinguishable from random false positives. This implies that best practice for dynamic triggering studies that depend on temporal correlation is to estimate the false positive rate and investigate whether the observed apparent triggering is distinguishable from the correlations that may occur by chance.

JGR Solid Earth↗
USGS2025

Uncertainty reduction for subaerial landslide-tsunami hazards

Subaerial rock slopes may generate a tsunami by rapidly moving into the water. Large uncertainty in landslide characteristics propagates into large uncertainty in tsunami hazard, making hazard assessment more difficult for land and emergency managers. Once a potentially tsunamigenic landslide is identified, it may not be clear which landslide characteristics contribute most significantly to uncertainty in the tsunami hazard. Our aim is to document the relative worth of different landslide characteristics (e.g., size, material properties) for reducing uncertainty in landslide-tsunami hazard assessments. Isolating the relative importance of specific landslide characteristics may inform prioritization of data collection and improve efficiency in understanding hazard. To accomplish this, we generated a set of 288 landslide-tsunami simulations in which we systematically varied the size and material properties of possible failure extents at the Barry Arm landslide complex in northwestern Prince William Sound, Alaska, USA. We find that for landslides smaller than the receiving waterbody, the landslide volume has the strongest effect on resulting wave characteristics and thus the highest leverage on reducing uncertainty in tsunami hazard. In contrast, for landslides substantially larger than the waterbody, the duration of rapid movement of the landslide has the highest leverage. Based on our results, we propose a classification scheme for subaerial landslides based on the relative size of the landslide and waterbody. Additionally, our results support the generation of a tsunami height transfer function between existing tide gages and a nearby coastal city. These results have direct implications for the practice of operational early warning.

Alaska↗
USGS2025

Timescales of surface faulting preservation in low-strain intraplate regions from landscape evolution modeling and the geomorphic and historical record

Large surface-rupturing intraplate earthquakes in stable continental regions (SCRs) are uncommon globally and have recurrence intervals of thousands to hundreds of thousands of years based on the paleoseismic and geomorphic record, challenging accurate active fault identification in these regions. To constrain the timescales of preservation for scarps created by surface ruptures from dip-slip earthquakes, we use a two-dimensional scarp diffusion model for typical intraplate settings and explore which parameters influence fault scarp preservation. These parameters include the coseismic vertical surface offset, the recurrence interval of similar magnitude earthquakes, diffusivity (as a proxy for mean annual precipitation rate), and the erodibility of the surficial material. We constrain parameter ranges from a compilation of historical surface ruptures in intraplate settings in a variety of climates, including the Central and Eastern United States, Australia, Europe, Central Asia (Mongolia, China), India, and West Africa. The timescales of scarp preservation from landscape evolution modeling agree well with observations of scarp preservation in low-strain SCR and intraplate tectonic settings, with some notable exceptions for Australian scarps. We find that the erodibility of the surficial material and earthquake recurrence interval have a stronger effect on the timescales of scarp preservation than diffusivity or coseismic vertical surface offset. Our model results may aid in identifying and characterizing subtle, slow-moving active faults in low-strain SCR and intraplate tectonic settings for different tectonic, geomorphic, and climatic characteristics. Accurate fault locations and characterization from the landscape record has implications for both probabilistic seismic and fault displacement hazard analyses.

Journal of Geophysical Research Solid Earth↗
USGS2026

Investigating the influence of climate and volcanic surface aging on fluvial erosion: A case study of Réunion Island, Indian Ocean

Precipitation is one of the dominant drivers of landscape erosion and evolution; however, the effects of typical rainfall compared with less frequent, high-magnitude precipitation events on erosion remain unclear. Volcanic islands are ideal locations to study such phenomena due to their simple geometries, nontectonic construction, and strong spatiotemporal rainfall gradients. However, spatial variation in surface age, created during their construction, often complicates their degradation histories by introducing temporal changes in erosion rates as drainage networks develop. Réunion Island (western Indian Ocean) presents a clear example of this, with an east–west gradient in both surface age and mean annual precipitation, as well as infrequent cyclones that alter the background rainfall pattern. In this study, we analyze the effects of surface age, average rainfall, and rainfall variability on basin development and fluvial erosion across the island. We calculate basin-averaged values of basin morphology, age, precipitation, river discharge, eroded volumes, and erosion rates, and use these to analyze the dominant drivers of landscape evolution through a series of correlation analyses. Our results indicate a temporal dependence on the influence of precipitation, with young surfaces being dominantly eroded by high-rainfall events and older surfaces eroded by mean annual rainfall patterns. Furthermore, we show that drainage development of shield volcanoes follows similar trends to other volcano types, and suggest that surface permeability and groundwater structure are important controls on runoff-driven erosion on shield volcanoes. These results add new components to the question of how precipitation impacts erosion.

Réunion Island↗
USGS2026

Fully contained laboratory earthquakes: The effect of asperity aspect ratio and free surfaces

Corner frequency ( f c ) and seismic moment ( M 0 ) are key parameters derived from seismic signals that are used to characterize earthquake stress drop, rupture area, and slip. These parameters are also affected by fault geometry and boundary conditions. However, the systematic study of these effects in laboratory settings has been challenging. This study presents laboratory earthquake experiments that examine how rupture dynamics are influenced by (a) the aspect ratio of rectangular PMMA velocity-weakening (VW) asperities surrounded by the Teflon velocity-strengthening (VS) patches, and (b) whether the sides of a VW asperity are confined with VS patches or are free surfaces. We found that increasing confinement by reducing free surfaces or increasing the VW asperity aspect ratio stabilizes fault slip, so that higher normal stress is required to transition from aseismic to seismic slip. Increased confinement and high aspect ratios also reduced M 0 and increased f c , both of which were determined from the radiated seismic waves. M 0 and f c were primarily controlled by the shorter dimension of the VW asperity. Analysis of high-frequency acoustic emission signals revealed that ruptures on high-aspect-ratio VW asperities propagated more unidirectionally, whereas ruptures on square VW asperities were more complex. Further, the high-aspect-ratio asperities were more likely to be eroded by surrounding VS regions while low-aspect-ratio asperities were more likely to rupture into the VS surroundings. These results demonstrate that both the confinement from surrounding stable areas and the geometry of the seismogenic patch can affect rupture nucleation, propagation, and seismic source characteristics.

JGR Solid Earth↗
USGS2024

Constraining mean landslide occurrence rates for non-temporal landslide inventories using high-resolution elevation data

Constraining landslide occurrence rates can help to generate landslide hazard models that predict the spatial and temporal occurrence of landslides. However, most landslide inventories do not include any temporal data due to the difficulties of dating landslide deposits. Here we introduce a method for estimating the mean landslide occurrence rate of deep-seated rotational and translational slides derived solely from high-resolution (≤3 m) elevation data and globally available estimates of the diffusion coefficient for sediment flux. The method applies a linear diffusion model to the roughest landslide deposits until they reach a representative non-landslide roughness distribution. This estimates the time for a landslide deposit to be unrecognizable in high-resolution digital elevation data, which we term the mean lifetime of the landslide. Using the mean lifetime and number of landslides within an area of interest, we can estimate the mean occurrence rate of landslides over that domain. We validate this approach using a comprehensive temporal inventory of landslides in western Oregon created using age-roughness curves that are calibrated with high-resolution elevation data and radiocarbon data. We find good agreement between our diffusion method and the existing age-roughness-derived estimates, producing mean lifetimes of 4500 and 5200 years (4% difference), respectively. Hazard maps produced using the two methodologies generally agree, with the maximum differences in landslide probability reaching 0.1. Due to the relative abundance of high-resolution elevation data compared with age-dated landslides, our method could help constrain landslide occurrence rates in areas previously considered unfeasible.

Oregon↗
USGS2026

Hazard potential of compound flooding from rainfall, storm surge, and groundwater in coastal New York and Connecticut

Compound flood events, the co-occurrence of multiple flood drivers, can result in flood hazard potential exceeding that of any single driver alone. To evaluate compound flooding in a semi-urbanized coastal area, historical records dating back to 1970 are used to study the co-occurrences of high precipitation, storm surge, and shallow groundwater conditions along the coastlines of New York and Connecticut. Joint return periods for coincident precipitation-surge events were computed using statistical dependence models and compared to the assumption of independence as a ratio, referred to here as a return period adjustment. Results indicate distinct seasonality where compound events in the area disproportionately occur in the cold season between October and April. Return period adjustments range from a factor of 1 to almost 9, demonstrating the range in precipitation-storm surge dependence across the study area. Across all 24 station triad locations, groundwater levels were elevated during times of precipitation- surge co-occurrence, reflecting the tendency for coastal storms and shallow groundwater conditions to co-occur seasonally. The result is a pseudo-trivariate compound flood hazard score and corresponding hazard map that integrates dependence between daily precipitation-surge events and overall monthly groundwater levels (as a precondition) into a relative compound hazard score. The location with the highest compound flood hazard score is on the south shore of Long Island, as well as locations across coastal Connecticut where groundwater levels compound the co-occurrence of heavy precipitation and storm surge.

Connecticut, New York↗
USGS2025

Three-dimensional seismic velocity models for the San Francisco Bay region, California from joint body-wave and surface-wave tomography validated by waveform simulation

A high-resolution seismic velocity model for both P and S waves is essential for the San Francisco Bay (SFB) region to accurately simulate earthquake ground motions and assess seismic hazards in this high-risk region. We present new three-dimensional P-wave and S-wave velocity (Vp and Vs) models of the SFB region developed using joint tomographic inversion with a rich set of earthquake and active-source body-wave data and ambient-noise surface-wave data. We designed a dynamic balance strategy to effectively balance the contributions of body-wave and surface-wave data during each iteration of the inversion. Owing to the complementary resolution of body-wave and surface-wave data, our new models are significantly improved compared to previous tomographic models. Major geologic features in the SFB region, including low-velocity basins, high-velocity Franciscan Complex, granite, and gabbro rocks, and across-fault velocity contrasts, are imaged in our Vp and Vs models. Compared to the geology-based U.S. Geological Survey velocity model, our new model has better defined structures for some important areas that are of great concern for seismic hazard assessment, such as the Sacramento-San Joaquin Delta, and the 2014 magnitude 6.0 South Napa earthquake area. We validated our model by simulating waveforms for a set of moderate-magnitude earthquakes. The good performance of our model in waveform simulation indicates its potential for improving ground motion simulation and seismic hazard assessment in the SFB region.

California↗
USGS2025

To heal or not to heal?: 1. The effect of pore fluid pressure on the frictional healing behavior of lithologies in Oklahoma

The competition between fault healing (i.e., re-strengthening) and fault loading determines the timing and magnitude of fault failure within the seismic cycle. Repeating earthquakes can give observational estimates of fault healing rates, however, it is difficult to link laboratory studies of frictional healing and observed healing rates from repeating earthquakes in part because of uncertainty in lithology at depth. Due to well-constrained and relatively simple geology, earthquakes in Oklahoma can be linked to the granitic basement rock and to the Arbuckle Group, which is primarily composed of dolomite at earthquake depths. Here, we conduct friction experiments to measure healing rates of the two earthquake-bearing lithologies at confining pressures representative of earthquake depths and pore pressures ranging from 0% to 80% of the confining pressure. We measure frictional healing by executing slide-hold-slide tests with hold times ranging from 3 s to 3000 s. The friction experiments on the Troy Granite indicate that pore fluid pressure does not greatly affect healing rate. On the other hand, the dolomite of the Arbuckle Group exhibits decreased healing with increased pore fluid pressure, with weakening at the highest pore pressure. We hypothesize that this is due to an increase in dissolution of dolomite at high pore pressures/low effective normal stress. These healing rates are used in the companion paper to understand the moment-recurrence time behavior of repeating earthquakes in Prague, Oklahoma. This work has implications for possible enhanced dissolution and weakening behavior of the Arbuckle Group during wastewater injection activities.

Oklahoma↗
USGS2026

From collision to subduction: Thermal-kinematic inversions constrain plate boundary structure and dip-slip activity in southwestern New Zealand

Constraints on three-dimensional fault system geometry and kinematics are required to understand both long-term tectonics and contemporary seismic hazard. In many cases, these parameters must be inferred from a combination of different data or analyses. Here, we invert low-temperature thermochronological data to quantitatively parameterize both the crustal-scale geometry and late Cenozoic dip-slip activity of the plate boundary system in southwest New Zealand. We find that the modern transpressive plate boundary system has accommodated the bulk of Australian-Pacific Plate convergence since establishment in the middle Miocene-early Pliocene. Shortening has occurred via (a) dextral-reverse slip on the moderate angle, listric central Alpine Fault décollement, and (b) reverse-slip on either the sharply curved, anti-listric northern Puysegur subduction interface or low-angle offshore thrust fault system that splays from the high-angle southern Alpine Fault at depth. We resolve late Cenozoic shortening rates on these structures that are indistinguishable, and interpret these to reflect the transfer of convergent deformation outboard of the predominantly strike-slip southern Alpine Fault. Our work helps elucidate the transition from strain localized oblique continental collision to strain partitioned subduction. We also provide an estimate of the across-strike width of the central-southern Alpine Fault section boundary at seismogenic depths. This is the first quantitative constraint on the geometry of a structural feature inferred to have arrested several major prehistoric earthquakes. This study furthers understanding of fault structure and dip-slip kinematics along the greatest sources of seismic hazard in and offshore of southwest New Zealand.

South Island↗
USGS2025

Multi-scale geophysical imaging of a hydrothermal system in Yellowstone National Park, USA

Little is known about the local plumbing systems that fuel Yellowstone’s famous hot springs, geysers and mud pots. A multi-method, multi-scale geophysical investigation was carried out in the Obsidian Pool Thermal Area (OPTA) to: (i) delineate the lateral extent of the hydrothermal area and associated surface features; (ii) estimate the dimensions of the upflow zone and identify its main controlling structures; (iii) assess fluids circulation pathways from depth to surface. Ground and airborne geophysical data were acquired to connect local and regional scales, from shallow to large depths. Maps of surface electrical resistivity show a strong correlation with hydrothermal features. At in-termediate depths, electrical resistivity permits delineating the upper limit of the upflow zone, while Poisson’s ratio highlights differences in subsurface fluid content. Combining these results with surface observations and topographic information, we speculate that differential mixing of hydrothermal and fresh water could explain the wide diversity of features observed at OPTA. Low electrical resistivity observed at large depths also suggest that a vast upflow zone, controlled by rhyolite flows and conjugate faults, underlies the OPTA. We speculate that hydrothermal fluids rise along fractures and reach the surface in topographic lows to form hydrothermal features. Our results show that synoptic, multi-scale geophysical measurements provide a roadmap for understanding where and how geologic heterogeneity, topography, fluid-gas separation, and the mixing of thermal and meteoric waters conspire to produce the wide variety of Yellowstone’s renowned hydrothermal features.

Wyoming↗
USGS2025

Dynamic feedbacks between river meandering and landsliding in northwestern Washington glacial terraces

Landsliding in river valleys poses unique risks for cascading hazards and can damage infrastructure and cause fatalities. In postglacial valleys, many landslides are posited to occur in relation to lateral river erosion, but the dynamics of fluvial-hillslope interactions are not well understood. Here, we investigate a section of the Nooksack River in western Washington State where the channel is flanked by landslide-prone glacial terraces similar to those that failed in the 2014 State Route 530 “Oso” landslide. We map 216 landslides through time across 17 aerial imagery data sets (1933–2022) and analyze them in relation to river meandering and curvature. We observe dynamic feedbacks between lateral river meandering and valley-adjacent landsliding. Terrace lateral retreat rates of up to 25 m/year owing to combined fluvial erosion and slope failure occur on pinned, outer meander bends immediately downstream from peaks in river curvature (>0.0075 1/m); these locations are predisposed to both shallow and deep-seated landslides. Deep-seated landslides extending 17%–32% of the active valley width into the floodplain can displace the river away from the floodplain margin and change the channel planform. River-displacing landslides relocate meanders up- or downstream, thereby conditioning the location of subsequent landslides. This conceptual model of coupled landslide-driven meander displacement and valley-adjacent landsliding is exemplified across western Washington river systems. The distance between up- and downstream valley-adjacent landsliding scales with valley width, meander wavelength, and terrace height. Our results can advance our understanding of the river-hillslope interface in landscape evolution and can be used to inform hazard management in river corridors.

Washington↗
USGS2025

New constraints on location and timing of the Great Lakes tectonic zone, central Upper Peninsula, Michigan, USA

The Great Lakes tectonic zone (GLTZ) forms the boundary between the Wawa–Abitibi and Minnesota River Valley subprovinces within the Archean Superior Province. The GLTZ is concealed for all of its 1100 km length, except for a segment in the central Upper Peninsula of Michigan. There, it is exposed as a northwest-striking mylonite zone along a 11 km segment, extending to the onlap of Paleozoic rocks to the east. Farther east, its location has been unknown. Here, we use aeromagnetic and gravity data to develop interpretations of the expression of the GLTZ and to define its extent under cover. Aeromagnetic gradients over the mylonite zone are interpreted to be produced by structurally juxtaposed rocks with varying magnetizations. Gravity data show a regional gradient along the GLTZ, produced by the juxtaposition of a dense greenstone belt on the north against lower-density gneisses and granites on the south. The GLTZ is interpreted to extend ∼55 km under cover to the east. The GLTZ is terminated on the east by the buried eastern arm of the ca. 1100 Ma Midcontinent Rift. An undeformed granitic dike that cuts the mylonitic foliation produces a U–Pb apatite age of 2523 ± 33 Ma, implying no major post-Archean shearing occurred, and is at odds with previous interpretations of major Proterozoic reactivation. A granite intrusion in the Minnesota River Valley subprovince produces a Pb–Pb zircon age of 2606.9 ± 3.6/7.4 Ma. This suggests that magmatism related to the Sacred Heart orogeny, previously known in Minnesota, extended to Michigan.

Michigan↗