Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “California Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6Linked to original sources
USGS1981

Seismology program; California Division of Mines and Geology

The year 1980 marked the centennial of the California Division of Mines and Geology (CDMG) and a decade of the Division's involvement in seismology. Factors which contributed to the formation of a Seismology Group within CDMG included increased concerns for environmental and earthquake safety, interest in earthquake prediction, the 1971 San Fernando earthquake and the 1973 publication by CDMG of an urban geology master plan for California. Reasons to be concerned about California's earthquake problem are demonstrated by the accompanying table and the figures. Recent seismicity in California, the Southern California uplift reflecting changes in crustal strain, and other possible earthquake precursors have heightened concern among scientific and governmental groups about the possible occurrence of a major damaging earthquake )M>7) in California.

Earthquake Information Bulletin (USGS)↗
USGS2005

Shear-wave velocity of surficial geologic sediments in Northern California: Statistical distributions and depth dependence

Shear-wave velocities of shallow surficial geologic units were measured at 210 sites in a 140-km2 area in the greater Oakland, California, area near the margin of San Francisco Bay. Differences between average values of shear-wave velocity for each geologic unit computed by alternative approaches were in general smaller than the observed variability. Averages estimated by arithmetic mean, geometric mean, and slowness differed by 1 to 8%, while coefficients of variation ranged from 14 to 25%. With the exception of the younger Bay mud that underlies San Francisco Bay, velocities of the geologic units are approximately constant with depth. This suggests that shear-wave velocities measured at different depths in these surficial geologic units do not need to be normalized to account for overburden stress in order to compute average values. The depth dependence of the velocity of the younger Bay mud most likely is caused by consolidation. Velocities of each geologic unit are consistent with a normal statistical distribution. Average values increase with geologic age, as has been previously reported. Velocities below the water table are about 7% less than those above it. ?? 2005, Earthquake Engineering Research Institute.

Earthquake Spectra↗
USGS2000

Discrepancy between earthquake rates implied by historic earthquakes and a consensus geologic source model for California

We examine the difference between expected earthquake rates inferred from the historical earthquake catalog and the geologic data that was used to develop the consensus seismic source characterization for the state of California [California Department of Conservation, Division of Mines and Geology (CDMG) and U.S. Geological Survey (USGS) Petersen et al., 1996; Frankel et al., 1996]. On average the historic earthquake catalog and the seismic source model both indicate about one M 6 or greater earthquake per year in the state of California. However, the overall earthquake rates of earthquakes with magnitudes (M) between 6 and 7 in this seismic source model are higher, by at least a factor of 2, than the mean historic earthquake rates for both southern and northern California. The earthquake rate discrepancy results from a seismic source model that includes earthquakes with characteristic (maximum) magnitudes that are primarily between M 6.4 and 7.1. Many of these faults are interpreted to accommodate high strain rates from geologic and geodetic data but have not ruptured in large earthquakes during historic time. Our sensitivity study indicates that the rate differences between magnitudes 6 and 7 can be reduced by adjusting the magnitude-frequency distribution of the source model to reflect more characteristic behavior, by decreasing the moment rate available for seismogenic slip along faults, by increasing the maximum magnitude of the earthquake on a fault, or by decreasing the maximum magnitude of the background seismicity. However, no single parameter can be adjusted, consistent with scientific consensus, to eliminate the earthquake rate discrepancy. Applying a combination of these parametric adjustments yields an alternative earthquake source model that is more compatible with the historic data. The 475-year return period hazard for peak ground and 1-sec spectral acceleration resulting from this alternative source model differs from the hazard resulting from the standard CDMG-USGS model by less than 10% across most of California but is higher (generally about 10% to 30%) within 20 km from some faults.

Bulletin of the Seismological Society of America↗
USGS2018

Geophysical and geologic maps of Mountain Pass and vicinity, California and Nevada

U.S. Geological Survey Scientific Investigations Map 3412 is a series of products that consists of geophysical and geologic maps of Mountain Pass and vicinity, California. Maps A and B (red outline in above map image) are gravity and aeromagnetic maps, respectively. The map series was begun as part of an effort to study regional crustal structures as an aid to understanding the geologic framework and mineral resources of the southeast Mojave Desert. Mountain Pass resides within the southeast Mojave Desert, and it is host to a one of the world’s largest rare earth element carbonatite deposits. The deposit is found along a north-northwest- trending, fault-bounded block that extends along the eastern parts of the Clark Mountain Range, Mescal Range, and Ivanpah Mountains. This Paleoproterozoic block is composed of a 1.7-Ga metamorphic complex of gneiss and schist that underwent widespread metamorphism and associated plutonism during the Ivanpah orogeny. The Paleoproterozoic rocks were intruded by a Mesoproterozoic (1.4 Ga) ultrapotassic alkaline intrusive suite and carbonatite body. The intrusive rocks include, from oldest to youngest, shonkinite, mesosyenite, syenite, quartz syenite, potassic granite, carbonatite, carbonatite dikes, and late shonkinite dikes. Each map in the series provides the basis for geophysical and geologic interpretations of the Mountain Pass carbonatite terrane. Combined, they provide a comprehensive framework of the regional subsurface geologic structure of the area. Together, they form the first publicly available series of geophysical and geologic maps of this part of the southeast Mojave Desert.

California, Nevada↗
USGS1978

Correlations between seismic wave velocities and physical properties of near-surface geologic materials in the southern San Francisco Bay region, California

To identify geologic units with distinctly different seismic responses for the purposes of seismic zonation, compressional and shear wave velocities have been measured in boreholes at 59 sites in the San Francisco Bay region in a wide range of near-surface (0-30m) geologic materials. Several physical parameters, which can be readily determined in the field, were found to correlate with the shear wave velocities and were used to define seismically distinct groups. For the unconsolidated to semiconsolidated sediments, texture, standard penetration resistance and depth were used to define eight seismically distinct groups. For the bedrock materials, fracture spacing and hardness were used to differentiate ten distinct categories. The correlation obtained between shear wave velocity and the physical parameters were used to regroup the map units defined for the San Francisco Bay region into seismically distinct units. The map units for the younger unconsolidated sediments can be really differentiated seismically. In contrast, the older semiconsolidated sedimentary deposits and bedrock units, which have experienced significant variations in post-depositial changes, show wider and overlapping velocity ranges. The map units for the sedimentary deposits have been regrouped into eight seismically distinct geotechnical units. The bedrock map units have been broadly regrouped into five distinct categories. Compressional wave velocities were not found to be well correlated with the physical parameters dependent on the soil or rock structure. For materials above the water table, the wide velocity variations found for each geotechnical group can be attributed to differences in degree of saturation. The strong correlations observed between shear wave velocity and other readily determine physical properties suggest that geologic maps which incorporate these parameters are most useful for seismic zonation.

California↗
USGS2006

Preliminary surficial geologic map database of the Amboy 30 x 60 minute quadrangle, California

The surficial geologic map database of the Amboy 30x60 minute quadrangle presents characteristics of surficial materials for an area approximately 5,000 km2 in the eastern Mojave Desert of California. This map consists of new surficial mapping conducted between 2000 and 2005, as well as compilations of previous surficial mapping. Surficial geology units are mapped and described based on depositional process and age categories that reflect the mode of deposition, pedogenic effects occurring post-deposition, and, where appropriate, the lithologic nature of the material. The physical properties recorded in the database focus on those that drive hydrologic, biologic, and physical processes such as particle size distribution (PSD) and bulk density. This version of the database is distributed with point data representing locations of samples for both laboratory determined physical properties and semi-quantitative field-based information. Future publications will include the field and laboratory data as well as maps of distributed physical properties across the landscape tied to physical process models where appropriate. The database is distributed in three parts: documentation, spatial map-based data, and printable map graphics of the database. Documentation includes this file, which provides a discussion of the surficial geology and describes the format and content of the map data, a database 'readme' file, which describes the database contents, and FGDC metadata for the spatial map information. Spatial data are distributed as Arc/Info coverage in ESRI interchange (e00) format, or as tabular data in the form of DBF3-file (.DBF) file formats. Map graphics files are distributed as Postscript and Adobe Portable Document Format (PDF) files, and are appropriate for representing a view of the spatial database at the mapped scale.

Open-File Report↗
USGS2022

Rockfall kinematics from massive rock cliffs: Outlier boulders and flyrock from Whitney Portal, California, rockfalls

Geologic conditions and topographic setting are among the most critical factors for assessing rockfall hazards. However, other subtle features of rockfall motion may also govern the runout of rockfall debris, particularly for those sourced from massive cliffs where debris can have substantial momentum during transport. Rocks may undergo collisions with trees and talus boulders, with the latter potentially generating flyrock—launched rock pieces resulting from boulder collisions that follow distinctively different paths than the majority of debris. Collectively, these intricacies of rockfall kinematics may substantially govern the hazards expected from rockfall to both persons and infrastructure located beneath steep cliffs. Here, we investigate the kinematics, including outlier boulder and flyrock trajectories, of seismically triggered rockfalls on 24 June 2020 that damaged campground facilities near Whitney Portal, CA, a heavily used outdoor recreation gateway to the Sierra Nevada mountains. Our results, obtained in part by rockfall runout model simulations, indicate that outlier boulder trajectories resulted from opportunities provided by less steep terrain beyond the talus edge. The influence of trees, initially thought to have served a protective capacity in attenuating rockfall energy, appears to have been negligible for the large boulder volumes (>50 m 3 ) mobilized, although they did potentially deflect the trajectory of flyrock debris. Rockfall outlier boulders from the event were comparable in volume and runout distance to prehistoric boulders located beyond the talus slope, thereby providing some level of confidence in the use of a single rockfall shadow angle for estimating future rockfall hazards at the site.

California↗
USGS1985

Data for four geologic test holes in the Sacramento Valley, California

The report provides geological and geophysical data for four of seven test holes drilled as a part of the Central Valley Aquifer Project, which is part of the Regional Aquifer Systems Analysis. The holes were drilled with a rotary well drilling machine to depths of 900 feet in the southwestern part of the Sacramento Valley in Solano and Yolo Counties. Geologic data for each well include lithology, texture, color, character of the contact, sorting, rounding, and cementation, determined from cuttings, cores, and sidewall covers. Fifty cores, 3 feet long, were obtained from each hole, and from eight to fourteen sidewall cores were collected. Geophysical data include a dual-induction log, spherically focused log (SFL), compensated neutron-formation density log, gamma-ray log, and a caliper log. These data are presented in four tables and on four plates. (USGS)

Open-File Report↗
USGS2011

The U.S. Geological Survey's gravity program in California

Since the 1963 gravity symposium, the U.S. Geological Survey has entered into a cooperative program with the California Division of Mines and Geology, the Army Map Service, and several universities for the purpose of completing a 5-mgal Bouguer gravity map of the entire State of California at a scale of 1:250,000 by 1970. The areal division of responsibility within the program is shown on a map of California by Chapman (p. 542). It is evident from a plot of existing stations that considerably more data are required in the eastern Mojave Desert located in the southeastern corner of the state, and in the Sierra Nevada north of Lake Tahoe. Additional fill-in work is needed in nearly all parts of the state. The data requirements vary for a 5-mgal contour map depending on the local complexity of the gravity field; but in general, we are obtaining gravity stations at an interval of about 3 km along roads, trails, and rivers, and 5 to 8 km between these access routes by cross-country jeep, horseback, or helicopter if necessary. About 6000 new stations were obtained in California by the Geological Survey during 1968 and we expect to obtain about 3000 more in 1969.

California↗
USGS2010

Surficial geologic map of the Amboy 30' x 60' quadrangle, San Bernardino County, California

The surficial geologic map of the Amboy 30' x 60' quadrangle presents characteristics of surficial materials for an area of approximately 5,000 km2 in the eastern Mojave Desert of southern California. This map consists of new surficial mapping conducted between 2000 and 2007, as well as compilations from previous surficial mapping. Surficial geologic units are mapped and described based on depositional process and age categories that reflect the mode of deposition, pedogenic effects following deposition, and, where appropriate, the lithologic nature of the material. Many physical properties were noted and measured during the geologic mapping. This information was used to classify surficial deposits and to understand their ecological importance. We focus on physical properties that drive hydrologic, biologic, and physical processes such as particle-size distribution (PSD) and bulk density. The database contains point data representing locations of samples for both laboratory determined physical properties and semiquantitative field-based information in the database. We include the locations of all field observations and note the type of information collected in the field to help assist in assessing the quality of the mapping. The publication is separated into three parts: documentation, spatial data, and printable map graphics of the database. Documentation includes this pamphlet, which provides a discussion of the surficial geology and units and the map. Spatial data are distributed as ArcGIS Geodatabase in Microsoft Access format and are accompanied by a readme file, which describes the database contents, and FGDC metadata for the spatial map information. Map graphics files are distributed as Postscript and Adobe Portable Document Format (PDF) files that provide a view of the spatial database at the mapped scale.

Scientific Investigations Map↗
USGS2010

Surficial geologic map of the Amboy 30' x 60' quadrangle, San Bernardino County, California

The surficial geologic map of the Amboy 30' x 60' quadrangle presents characteristics of surficial materials for an area of approximately 5,000 km 2 in the eastern Mojave Desert of southern California. This map consists of new surficial mapping conducted between 2000 and 2007, as well as compilations from previous surficial mapping. Surficial geologic units are mapped and described based on depositional process and age categories that reflect the mode of deposition, pedogenic effects following deposition, and, where appropriate, the lithologic nature of the material. Many physical properties were noted and measured during the geologic mapping. This information was used to classify surficial deposits and to understand their ecological importance. We focus on physical properties that drive hydrologic, biologic, and physical processes such as particle-size distribution (PSD) and bulk density. The database contains point data representing locations of samples for both laboratory determined physical properties and semiquantitative field-based information in the database. We include the locations of all field observations and note the type of information collected in the field to help assist in assessing the quality of the mapping. The publication is separated into three parts: documentation, spatial data, and printable map graphics of the database. Documentation includes this pamphlet, which provides a discussion of the surficial geology and units and the map. Spatial data are distributed as ArcGIS Geodatabase in Microsoft Access format and are accompanied by a readme file, which describes the database contents, and FGDC metadata for the spatial map information. Map graphics files are distributed as Postscript and Adobe Portable Document Format (PDF) files that provide a view of the spatial database at the mapped scale.

California↗
USGS2006

Preliminary geologic map of the Black Mountain area northeast of Victorville, San Bernardino County, California

The Black Mountain area is in the Mojave Desert about 20 km northeast of Victorville, California. The geology of this area is of interest primarily for its excellent exposures of the early Mesozoic Fairview Valley Formation, a sequence of weakly metamorphosed sedimentary rocks including a thick, commercially important unit of limestone conglomerate that has been mined for cement at Black Mountain Quarry for several decades. Recent geochronologic work has shown that the Fairview Valley Formation is probably of Early Jurassic age. This preliminary geologic map of the Black Mountain area depicts the stratigraphic and structural relations of the Fairview Valley Formation and the associated rocks, most notably the overlying Sidewinder Volcanics of Early(?), Middle, and Late(?) Jurassic age. The map is based on new field studies by the author designed to clarify details of the stratigraphy and structure unresolved by previous investigations. The map is considered preliminary because the ages of some geologic units critical for a satisfactory understanding of the stratigraphic and structural framework remain unknown. The map area also includes a segment of the Helendale Fault, one of several faults of known or inferred late Cenozoic right-lateral displacement that make up the Eastern California Shear Zone. The fault is marked by aligned northeast-facing scarps in Pleistocene or older alluvial deposits and the underlying bedrock units. Relations in the map area suggest that right-lateral displacement on the Helendale Fault probably does not exceed 2 km, a conclusion compatible with previous estimates of displacement on this fault based on relations both within and outside the Black Mountain area.

Open-File Report↗
USGS2007

U.S. Geological Survey input-data form and operational procedure for the assessment of conventional petroleum accumulations: Chapter 25 in Petroleum systems and geologic assessment of oil and gas in the San Joaquin Basin Province, California

The U.S. Geological Survey model for undiscovered conventional accumulations is designed to aid in the assessment of crude oil, natural gas, and natural gas liquids (collectively called petroleum) resources. Conventional accumulations may be described in terms of discrete fields or pools localized in structural and stratigraphic traps by the buoyancy of oil or natural gas in water. Conventional accumulations are commonly bounded by a down-dip water contact. The assessment model requires estimates of the number and sizes of undiscovered conventional accumulations. Technically recoverable petroleum resources from undiscovered conventional accumulations are calculated by statistically combining probability distributions of the estimated number and sizes of undiscovered accumulations, along with associated risks and coproduct ratios. Probabilistic estimates of petroleum resources are given for oil in oil accumulations, gas (associated/dissolved) in oil accumulations, natural gas liquids in oil accumulations, gas (nonassociated) in gas accumulations, and total liquids (oil and natural gas liquids) in gas accumulations.

Professional Paper↗
USGS2007

A Monte Carlo simulation method for the assessment of undiscovered, conventional oil and gas: Chapter 26 in Petroleum systems and geologic assessment of oil and gas in the San Joaquin Basin Province, California

The U.S. Geological Survey has developed two Monte Carlo programs for assessment of undiscovered conventional oil and gas resources. EMCEE (for Energy Monte Carlo) and Emc2 (for Energy Monte Carlo program 2) are programs that calculate probabilistic estimates of undiscovered resources based on input distributions for numbers and sizes of undiscovered fields. Emc2 uses specific types of distributions for the input, whereas EMCEE allows greater flexibility of the input distribution types.

Professional Paper↗
USGS2013

SAFRR (Science Application for Risk Reduction) Tsunami Scenario--Executive Summary and Introduction: Chapter A in The SAFRR (Science Application for Risk Reduction) Tsunami Scenario

The Science Application for Risk Reduction (SAFRR) tsunami scenario depicts a hypothetical but plausible tsunami created by an earthquake offshore from the Alaska Peninsula and its impacts on the California coast. The tsunami scenario is a collaboration between the U.S. Geological Survey (USGS), the California Geological Survey, the California Governor’s Office of Emergency Services (Cal OES), the National Oceanic and Atmospheric Administration (NOAA), other Federal, State, County, and local agencies, private companies, and academic and other institutions. This document presents evidence for past tsunamis, the scientific basis for the source, likely inundation areas, current velocities in key ports and harbors, physical damage and repair costs, economic consequences, environmental and ecological impacts, social vulnerability, emergency management and evacuation challenges, and policy implications for California associated with this hypothetical tsunami. We also discuss ongoing mitigation efforts by the State of California and new communication products. The intended users are those who need to make mitigation decisions before future tsunamis, and those who will need to make rapid decisions during tsunami events. The results of the tsunami scenario will help managers understand the context and consequences of their decisions and how they may improve preparedness and response. An evaluation component will assess the effectiveness of the scenario process for target stakeholders in a separate report to improve similar efforts in the future.

California↗