Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Atmospheric Measurement Techniques”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

470 records · Page 6Linked to original sources
USGS2025

Triple-oxygen isotopic evidence of prolonged direct bioleaching of pyrite with O2

Sulfate is often touted as containing atmospheric oxygen whose isotopic signature can constrain redox, environmental conditions, and biological activity. Yet, the amount and isotopic fractionation associated with air-O 2 incorporation during sulfate formation is still debated, making its verification difficult. In this study, we identify a distinct, microbially dominated environment with the potential to preserve maximum signals of air-O 2 in sulfate. We report triple-oxygen isotope data for sulfate produced from pyrite oxidation in microbial and abiotic experiments, and from natural dissolved sulfate from the Rio Tinto, Spain, an acid mine drainage site. The oxygen isotope systematics of sulfate in these environments define a unique kinetic isotope effect associated with initial stage pyrite oxidation by Acidithiobacillus ferrooxidans that preserves >80 % oxygen from air-O 2 in sulfate. Unlike experiments, which evolve toward water-oxygen dominated sulfate on short time scales, Rio Tinto, Spain hosts a microbe rich environment with distinct geochemistry that maintains high O 2 -oxygen in sulfate. Therefore, in addition to containing isotopic records from water and air, sulfates can also contain a biosignature that is promising for understanding conditions on Mars and early Earth.

Earth and Planetary Science Letters↗
USGS2026

Understanding the resource potential of natural hydrogen on Earth: Scientific gaps, uncertainties and recommendations

A comprehensive scientific research roadmap is essential to bridge knowledge gaps and deepen the understanding of key geological, geochemical, and geophysical aspects of natural hydrogen (H 2 ) as a potential new energy resource. This paper reviews major scientific uncertainties on natural H 2 , suggesting research priorities, as a guide for defining exploration strategies, techniques, and data interpretation. The uncertainties concern all phases of the natural H 2 cycle, from generation (source rocks) through migration (advection and diffusion) and accumulation (reservoir and cap rocks) to the application and interpretation of subsurface and surface geochemical and geophysical exploration techniques. Understanding H 2 sources and generation rates (the amount of H 2 generated by a given volume of rock over time) is crucial for determining whether a geological H 2 system operates as a short-term dynamic system with rapid H 2 production and release, or as a conventional gas system with long-term accumulations, analogous to petroleum reservoirs. Preliminary estimates for serpentinisation, radiolysis, and organic matter degradation suggest that H 2 generation is not inherently fast, especially for non-hydrothermal continental systems (crystalline basement of shields, ophiolites, peridotite massifs, sedimentary basins), and long-term accumulations, like those of fossil natural gas systems, represent the most likely scenario. The mechanisms of H 2 migration through geological formations require application of fundamental principles of fluid-flow physics, distinguishing advection and diffusion, as well as their forms (from gas-phase, bubble flows to aqueous solutions). Additional studies of H 2 accumulation and retention in subsurface reservoirs could improve understanding of mechanisms of H 2 migration by focusing on the rock fluid-bearing properties and the factors affecting H 2 preservation, such as the presence of cap rocks impermeable to H 2 , pressure conditions, residence times, and microbial or abiotic consumption. Advanced techniques, including reservoir modelling, flow simulations, 3D imaging (micro-CT) of H 2 -bearing rocks, and extraction and analysis of gas occluded in rocks, can provide insights into the stability and potential recoverability of H 2 accumulations. The interpretation of surface exploration techniques, including gas geochemistry, geophysics, and remote sensing, long employed in mineral and energy resource exploration, is now being adapted for natural H 2 studies, but challenges remain in the data interpretation. Distinguishing H 2 seepage due to geological degassing from H 2 produced near the surface by modern microbial processes or artificial sources, such as hammering or drilling for soil-gas sampling, drilling into aquifers, and corrosion in boreholes, is an essential step in exploration. The simple detection of H 2 in soils, even in morphological structures like sub-circular depressions or “fairy circles”, cannot be cursorily interpreted as a signal of natural H 2 seepage from a deep source. A holistic geochemical approach, including isotopic analyses of gases associated with H 2 , is recommended to distinguish among the variety of possible H 2 origins. Observations of H 2 in wells should be interrogated to rule out possible artifacts such as corrosion and drill bit metamorphism. The integration of multiple geophysical methods, including seismic, gravimetric, magnetic, and electro-magnetic surveys, is recommended to mitigate interpretation ambiguities regarding the structure of a subsurface H 2 system (source and reservoir rocks, including fluid and gas storage), due to the non-uniqueness of rock-specific physical properties.

Earth-Science Reviews↗
USGS2025

Lunar grid systems, coordinate systems, and map projections for the Artemis missions and lunar surface navigation

Foreward This document contains design specifications of a navigational standard for the Moon, including a Lunar Transverse Mercator system, a Lunar Polar Stereographic system, a Lunar Grid Reference System, and a unique coordinate structure, Artemis Condensed Coordinates, for Artemis mission navigation and lunar surface science. The National Aeronautics and Space Administration (NASA) Artemis campaign seeks to place humans on the Moon for the first time since the Apollo missions. Early Artemis missions are heavily focused on the lunar south pole, which promises to return valuable data on the Moon’s geologic record, amongst other mission objectives. Coordinate systems in use today for the lunar south pole provides crew members on the surface neither an efficient nor intuitive means to communicate their position and orientation. A novel grid coordinate system, the Lunar Grid Reference System, is proposed to address these concerns for use in real-time extravehicular activity operations on the lunar surface. The many stakeholders involved in the Artemis missions will need a common system to communicate position and orientation while astronauts are operating on the lunar surface. To that end, Artemis crew members will need that system to be efficient and intuitive to promote efficient extravehicular activity timelines and reduce confusion. In the context of this document, these characteristics are addressed on the design of lunar coordinate systems: Efficient.—The number of characters required to communicate a location within a desired precision level in both local and global contexts, and how many steps are required for a recipient or sender to interpret a location. Intuitive.—How well the system aligns with human perceptual abilities, and whether the system yields distances that have the same relationship to actual lunar surface distance in all directions from the point where a person is located. Technological systems are currently being investigated to supplement the crew members’ ability to locate and orient themselves and other assets on the lunar surface; however, it is unlikely that those systems will be fully operational for the first few landed missions. Even with future positional aids, crew members will still need an efficient and intuitive means to communicate position and orientation. In addition, if technological systems fail, the crews will require land navigation skills and have maps available, thus providing further motivation for a crew-centric coordinate system. The contents of this U.S. Geological Survey (USGS) document detail a comprehensive framework for standardizing lunar crewed surface navigation within NASA and outlines the protocols, methods, and designs necessary for achieving consistency and interoperability across relevant space mission teams and lunar surface navigators. Key components of this document include designs of map projections, projected coordinate reference systems (Lunar Transverse Mercator and Lunar Polar Stereographic systems), and a grid system (Lunar Grid Reference System and Artemis Condensed Coordinates) for the Moon. The work proposed in this document seeks to accomplish something similar to the National Geospatial-Intelligence Agency (NGA) document SIG 0012 (NGA, 2014a), but for using grid systems for the Moon. This report incorporates initial feedback and input from NASA’s Artemis Geospatial Data Team, NASA’s Flight Operations Directorate, National Geodetic Survey, USGS Astrogeology Science Center, and NGA and is intended to serve as a resource for all involved with the Artemis missions, as well as for engineers designing and operating lunar infrastructure.

Techniques and Methods↗
USGS1976

Guidelines for collection and field analysis of ground-water samples for selected unstable constituents

The unstable nature of many chemical and physical constituents in ground water requires special collection procedures and field analysis immediately after collection. This report describes the techniques and equipment commonly used in the collection and field analysis of samples for pH, temperature, carbonate, bicarbonate, specific conductance, Eh, and dissolved oxygen.

Open-File Report↗
USGS2024

Joint pilot fish habitat framework

This story map will take you through the process of exploring and testing methods necessary for a higher resolution, seamless fish habitat assessment across both inland and estuarine waters through the lens of our joint pilot assessment Fish habitat assessments attempt to relate past, current, or future landscape conditions to the state of fish species occurrence, distribution, abundance, or community and habitat condition in streams, rivers, or estuaries. Previous fish habitat assessments, such as the National Fish Habitat Assessment, conducted separate and disconnected assessments for inland waters and estuaries. In this project, National Oceanic and Atmospheric Administration ( NOAA ) and U.S. Geological Survey ( USGS ) researchers created a seamless spatial framework to allow assessments that integrate influences on fish habitat from headwaters to the estuary. This effort began when the Chesapeake Bay Program Fish Habitat Action Team expressed interest in a Baywide fish habitat assessment spanning tidal salt, tidal fresh, warm non-tidal, and cold non-tidal waters. However, the complexity of the myriad of implementation details to consider when developing such an assessment necessitated the need for a tributary-specific pilot assessment. To conduct this pilot assessment, a NOAA/USGS joint partnership was formed with cooperation and support from the Chesapeake Bay Agreement and Chesapeake Bay Fish Habitat Action Team (FHAT).

Maryland↗
USGS2000

Water-quality conditions and relation to drainage-basin characteristics in the Scituate Reservoir Basin, Rhode Island, 1982-95

The Scituate Reservoir Basin covers about 94 square miles in north central Rhode Island and supplies more than 60 percent of the State of Rhode Island's drinking water. The basin includes the Scituate Reservoir Basin and six smaller tributary reservoirs with a combined capacity of about 40 billion gallons. Most of the basin is forested and undeveloped. However, because of its proximity to the Providence, Rhode Island, metropolitan area, the basin is subject to increasing development pressure and there is concern that this may lead to the degradation of the water supply. Selected water-quality constituent concentrations, loads, and trends in the Scituate Reservoir Basin, Rhode Island, were investigated locate parts of the basin likely responsible for exporting disproportionately large amounts of water-quality constituents to streams, rivers, and tributary reservoirs, and to determine whether water quality in the basin has been changing with time. Water-quality data collected between 1982 and 1995 by the Providence Water Supply Board PWSB) in 34 subbasins of the Scituate Reservoir Basin were analyzed. Subbasin loads and yields of total coliform bacteria, chloride, nitrate, iron, and manganese, estimated from constituent concentrations and estimated mean daily discharge records for the 1995 water year, were used to determine which subbasins contributed disproportionately large amounts of these constituents. Measurements of pH, color, turbidity, and concentrations of total coliform bacteria, sodium, alkalinity, chloride, nitrate, orthophosphate, iron, and manganese made between 1982 and 1995 by the PWSB were evaluated for trends. To determine the potential effects of human-induced changes in drainage- basin characteristics on water quality in the basin, relations between drainage-basin characteristics and concentrations of selected water-quality constituents also were investigated. Median values for pH, turbidity, total coliform bacteria, sodium, alkalinity, chloride, nitrate, and iron were largest in subbasins with predominately residential land use. Median instantaneous loads reflected drainage-basin size. However, loads normalized by drainage area (median instantaneous yields) also were largest in residential areas where point and non-point sources are likely, and in areas of poorly drained soils. Significant trends in water-quality constituents from 1982 to 1995 in the Scituate Reservoir Basin indicate that the quality of the water resources in the basin may be slowly changing. Scituate Reservoir subbasins with large amounts of residential land use showed increasing trends in alkalinity and chloride. In contrast, subbasins distributed throughout the drainage basin showed increasing trends in pH, color, nitrate, and iron concentrations, indicating that these characteristics and constituents may be affected more by atmospheric deposition. Although changing, water-quality constituent concentrations in the Scituate Reservoir Basin only occasionally exceeded Rhode Island and USEPA water-quality guidelines and standards. Result of correlation analysis between pH, color, turbidity, and concentrations total coliform bacteria, sodium, alkalinity, chloride, nitrate, orthophosphate, iron, and manganese and land use, geology, wetlands, slope, soil drainability, and roads indicated that the percentage of wetlands, roads, and slope appear have the greatest effect on water-quality in the Scituate Reservoir Basin. The percentage of urban, residential, and commercial land use also are important, but to a lesser degree than wetlands, roads, and slope. Finally, geology appears to have the least effect on water quality compared to other drainage-basin characteristics investigated.

Rhode Island↗
USGS2026

Groundwater dependency and hydroclimatic influences on riparian and upland vegetation productivity, Upper San Pedro, Arizona, United States

In arid and semi-arid regions, groundwater sustains vegetation through subsurface water access, yet the responses of groundwater-dependent ecosystems (GDEs) to changing hydroclimate and groundwater availability are relatively understudied. This study investigates seasonal and spatial patterns in vegetation greenness using Landsat Enhanced Vegetation Index (EVI) values across riparian and upland zones in the semi-arid Upper San Pedro (USP) watershed, southern Arizona, which experiences a bimodal precipitation regime. We paired 25 years (2000–2024) of EVI and depth to groundwater (DTG) data from 89 wells and climate metrics (precipitation and vapour pressure deficit) to quantify the sensitivity of vegetation to subsurface moisture as well as atmospheric moisture supply and demand. Vegetation at wells near the USP riparian area showed strong associations between EVI and DTG anomalies during the monsoon season, indicating sustained groundwater use even during this wet period when summer precipitation is abundant. In contrast, upland vegetation that lacked access to groundwater showed minimal sensitivity in EVI to DTG and was generally less responsive to vapour pressure deficit. Interestingly, the riparian GDEs were not decoupled from precipitation and climate variability. These results underscore the importance of groundwater for maintaining riparian productivity and highlight the utility of remote sensing in identifying vegetation-climate-groundwater linkages across heterogeneous dryland landscapes.

Arizona↗
USGS2026

Thermal detectability of subsurface water ice on Mars: A comparative analysis for the Subsurface Water Ice Mapping (SWIM) Project

We have developed a new global map of shallow ground ice distribution, SWIM23, based on Mars Global Surveyor Thermal Emission Spectrometer data and made systematic comparisons between this new map and two similar, previously developed data products. We have explored the origin of differences between the three ice maps by detailing technical and procedural differences in their development, by making global pixel-by-pixel comparisons, and by carrying out a series of one-dimensional thermal simulations to explore fundamental physical limitations of thermal ice-detection techniques. These efforts and the production of a composite thermal ice-consistency map supported integration of multiple geophysical data products relevant to ice detection in the upper meter of the Martian regolith into the larger Mars Subsurface Water Ice Mapping project. Our work also highlights fundamental physical limitations to thermal ice detection as a technique, particularly the rapid fall-off in ice detection sensitivity at depths >30 cm, which produces maximum uncertainty in the presence and depth of ice within regions preferred for potential human landing sites. A future Mars orbiter mission designed to detect ice and support crewed landing site selection in the midlatitude region should give payload priority to an instrument capable of probing the 1–5 m depth range (i.e., a high-frequency radar), over a next-generation thermal spectrometer, which is unlikely to offer clarity on ice table depths or lateral continuity of the ice table in the locations of highest interest.

Planetary Science Journal↗
USGS2025

Gaps in water quality modeling of hydrologic systems

This review assesses gaps in water quality modeling, emphasizing opportunities to improve next-generation models that are essential for managing water quality and are integral to meeting goals of scientific and management agencies. In particular, this paper identifies gaps in water quality modeling capabilities that, if addressed, could support assessments, projections, and evaluations of management alternatives to support ecosystem health and human beneficial use of water resources. It covers surface water and groundwater quality modeling, dealing with a broad suite of physical, biogeochemical, and anthropogenic drivers. Modeling capabilities for six constituents (or constituent categories) are explored: water temperature, salinity, nutrients, sediment, geogenic constituents, and contaminants of emerging concern. Each constituent was followed through the coupled atmospheric-hydrologic-human system, with prominent modeling gaps described for a diverse array of relevant inputs, processes, and human activities. Commonly identified modeling gaps primarily fall under three types: (1) model gaps, (2) data gaps, and (3) process understanding gaps. In addition to potential solutions for addressing specific individual modeling limitations, some broad approaches (e.g., enhanced data collection and compilation, machine learning, reduced-complexity modeling) are discussed as ways forward for tackling multiple gaps. This gap analysis establishes a framework of diverse approaches that may support improved process representation, scale, and accuracy of models for a wide range of water quality issues.

Water↗
USGS2026

Predictions of anthropogenic background PFAS concentrations in soil and relation to bedrock lithology and groundwater quality

Detectable concentrations of per- and polyfluoroalkyl substances (PFAS) have been observed in soils in remote areas and presumably originate from atmospheric deposition. These anthropogenic background concentrations may enable some PFAS to leach to groundwater at levels that exceed regulatory criteria for drinking water. However, anthropogenic background soil concentrations and their connection to groundwater are not well characterized. We developed a boosted regression tree model to predict perfluorooctanesulfonic acid (PFOS) and perfluorooctanoic acid (PFOA) concentrations in shallow soils across northern New England. Low soil pH was the most important predictor of elevated anthropogenic PFOS and PFOA concentrations in background soils, rather than potential PFAS sources, land use, or population density. Total organic carbon (TOC) was also an important predictor for PFOS soil concentrations. Model predictions indicate that 73% of the shallow soils within Maine, Vermont, and New Hampshire exceed New Hampshire’s Soil Remediation Standard for PFOS (0.5 ng/g) and 41% exceed the PFOA standard (0.4 ng/g). Analysis of soil model results and groundwater data suggests that areas with high soil pH are associated with higher groundwater detection frequencies, illustrating how areas with less retention in soil are, conversely, also areas with potentially greater groundwater vulnerability. Further analysis indicates that groundwater may be more vulnerable in calcareous lithologies.

Maine, New Hampshire, Vermont↗
USGS2024

Monitoring marine eruptions

Introduction Submarine volcanoes produce much of the same seismicity and eruptive activity as subaerial volcanoes and can pose hazards to society. Although they can be monitored with similar techniques and methods as described in other chapters of this volume, their submerged location brings unique challenges. This chapter addresses these challenges and provides recommendations for monitoring volcanoes fully or partly in marine environments to meet the capabilities described in other chapters of this volume. The United States and its territories host dozens of submarine volcanoes with most (around 60) in the Commonwealth of the Northern Mariana Islands. Approximately 20 of the Northern Mariana Islands submarine volcanoes are known to be hydrothermally active, and 10 have confirmed eruptions since the 1950s (for example, Baker and others, 2008; Tepp and others, 2019a). Nine of those volcanoes were considered by the National Volcanic Threat Assessment (Ewert and others, 2018) to have a combination of eruptive type and summit depth that poses a higher risk of hazardous eruptions, although only one was listed as a moderate (level 3) threat. Other notable submarine volcanoes of interest to the United States that have historically erupted are Axial Seamount off the Washington State coast, Kamaʻehuakanaloa in Hawaiʻi, and Vailuluʻu seamount in American Samoa. All of these, however, have a low risk of hazards because of their depth (greater than 600 meters below sea level) and eruptive type and so are not included in the National Volcanic Threat Assessment. In addition to submarine volcanoes, the submerged flanks of island volcanoes can also be a source of hazardous submarine eruptions—for example, the 1877 eruption of Mauna Loa, Hawai‘i, in Kealakekua Bay (Wanless and others, 2006). The most notable submarine eruption in recent times was the 2022 eruption of Hunga Tonga–Hunga Haʻapai in Tonga, which was one of the largest eruptions on Earth in the past 100 years. It created a massive volcanic plume, unprecedented shock waves, and far-reaching tsunami (Lynett and others, 2022). Other recent submarine eruptions in the Pacific Ocean Basin have produced subaerial plumes that reached aircraft heights (Carey and others, 2014) and large pumice rafts that can affect marine traffic and harbors (for example, Jutzeler and others, 2014; Kornei, 2019). These examples illustrate the potential hazards of major submarine eruptions. Yet, submarine volcanoes are largely unmonitored, and many eruptions occur that are unnoticed or only identified hours or days afterward. Within U.S. territory, submarine volcanoes in the Northern Mariana Islands have been known to produce eruptive activity that can affect society. Reports from fishermen and other marine vessels in the Northern Mariana Islands have noted underwater explosions, sea-surface discoloration, and bubbling water, all of which are known to be signs of submarine volcanic activity. South Sarigan seamount, located about 160 kilometers (km) north of Saipan, erupted in 2010 from greater than 150 meters below the sea surface, resulting in a gas and ash plume that reached more than 11.9 km into the atmosphere (for example, Searcy, 2013; Embley and others, 2014), high enough to affect international air traffic. Precursory and co-eruptive seismicity was detected on the regional Northern Mariana Islands seismic network (Searcy, 2013) and on global monitoring instruments (Green and others, 2013). Monitoring of submarine volcanoes is best accomplished with marine-based instrumentation, which is also useful for monitoring small island volcanoes that may not have the land area necessary for comprehensive subaerial monitoring. The primary marine-based instrumentation used for submarine volcanoes includes ocean-bottom pressure sensors to assess sea-floor deformation, ocean-bottom seismometers (OBSs) to detect seismicity, and both moored and ocean-bottom hydrophones to detect submarine explosions. Other sensors offer important monitoring data, such as turbidity, temperature, and chemistry of hydrothermal emissions. Marine-based instruments are typically deployed in campaign-style networks with no real-time telemetry owing to cost considerations and technical limitations. However, when necessary, marine instruments can be operated in real time using cables to transmit data to land-based facilities; other technologies for this purpose are in use or in development, such as acoustic transmission from the instrument to a moored buoy (Matsumoto and others, 2016) and a winch-based system with a satellite antenna that is part of the instrument mooring (Matsumoto and others, 2019). Emerging technologies for marine-based monitoring may be considered as part of a future monitoring plan. These technologies include ocean gliders and floats with on-board hydrophones that have been used to record earthquakes and submarine eruptions (for example, Matsumoto and others, 2013; Sukhovich and others, 2015) and fiber-optic cables that have been used as strainmeters to detect earthquakes (for example, Marra and others, 2018; Lindsey and others, 2019). Land-based instruments and satellites can also provide some capability for monitoring submarine volcanoes, but they provide more limited observations than marine-based instrumentation.

Scientific Investigations Report↗
USGS2024

Exploring the uncertainty of machine learning models and geostatistical mapping of rare earth element potential in Indiana coals, USA

Rare earth elements and yttrium (REEs) have a wide range of applications in high- and low-carbon technologies. The strategic significance of REEs has grown due to their expanding applications in manufacturing industries and the constrained availability of these essential resources. This research explores the applicability of machine learning models and their uncertainty for assessing the REE potential in coal beds using various coal parameters as inputs. The work focuses on developing a predictive model based on geological variables, excluding considerations related to potential shifts in the commodities market. The Indiana Coal Quality Database was used as the data source. The promising and unpromising indicators derived from the outlook coefficient of samples from the database were used as the REE potential indicator for machine learning classification models. The filter-based approach with bootstrap was used to evaluate the importance of the coal parameters and their prediction uncertainties. Four machine learning methods (linear discriminant analysis (LDA), random forest (RF), support vector machine (SVM), and artificial neural networks (ANN), a data balancing and augmentation approach (Synthetic Minority Over-sampling Technique), and bootstrap resampling techniques were used for building the models and evaluating their prediction capabilities under uncertainty. It was determined that the SVM bootstrap model with ten-times balanced and augmented data provided superior results compared with other models. Finally, stochastic spatial maps of the REE potential within the coal basin were generated using sequential indicator simulation. The spatial maps of the REE potential showed that a 29% area of the Indiana section of the Illinois coal basin has economic potential of REEs, with 90% confidence.

Indiana↗
USGS2024

A conceptual framework to assess post-wildfire water quality: State of the science and knowledge gaps

Wildfire substantially alters aquatic ecosystems by inducing moderate to catastrophic physical and chemical changes. However, the relations of environmental and watershed variables that drive those effects are complex. We present a Driver-Factor-Stressor-Effect (DFSE) conceptual framework to assess the current state of the science related to post-wildfire water-quality. We reviewed 64 peer-reviewed papers using the DFSE framework to identify drivers, factors, stressors, and effects associated with each study. A total of five drivers were identified and ranked according to their frequency of occurrence in the literature: atmospheric processes > fire characteristics > ecologic processes and characteristics > land surface characteristics > soil characteristics. Commonly reported stressors include increased nutrients, runoff, and sediment transport. Furthermore, although several different factors have been used at least once to explain water-quality effects, relatively few factors outside of precipitation and fire characteristics are frequently studied. We identified several gaps indicating the need for long-term monitoring, multi-factor studies, consideration of organic contaminants, consideration of groundwater, and inclusion of soil characteristics. This assessment expands on other reviews and meta-analyses by exploring causal linkages between influential variables and overall effects in post-wildfire watersheds. Information gathered from our assessment and the framework itself can be used to inform future monitoring plans and as a guide for modeling efforts focused on better understanding specific processes or to mitigate potential risks of post-wildfire water quality.

Water Resources Research↗
USGS2025

Speleothem evidence for Late Miocene extreme Arctic amplification – An analogue for near-future anthropogenic climate change?

The Miocene provides an excellent climatic analogue for near-future runaway anthropogenic warming, with atmospheric CO 2 concentrations and global average temperatures similar to those projected for the coming century under extreme-emissions scenarios. However, the magnitude of Miocene Arctic warming remains unclear due to the scarcity of reliable proxy data. Here we use stable oxygen isotope and trace element analyses, alongside clumped isotope and fluid inclusion palaeothermometry of speleothems to reconstruct palaeo-environmental conditions near the Siberian Arctic coast during the Tortonian (8.68 ± 0.09 Ma ). Stable oxygen isotope records suggest warmer-than-present temperatures. This is supported by temperature estimates based on clumped isotopes and fluid inclusions giving mean annual air temperatures between + 6.6 and + 11.1 °C , compared with − 12.3 °C today. Trace elements records reveal a highly seasonal hydrological environment. Our estimate of > 18 °C of Arctic warming supports the wider consensus of a warmer-than-present Miocene and provides a rare palaeo-analogue for future Arctic amplification under high-emissions scenarios. The reconstructed increase in mean surface temperature far exceeds temperatures projected in fully coupled global climate models, even under extreme-emissions scenarios. Given that climate models have consistently underestimated the extent of recent Arctic amplification, our proxy data suggest Arctic warming may exceed current projections.

Lena River delta↗
USGS2025

VIPER site analysis

We needed to evaluate available orbital data of NASA’s Volatiles Investigating Polar Exploration Rover (VIPER) mission area in order to derive a variety of maps to help the science team identify scientifically interesting places for the rover to visit and to provide scientific context for our mission. Some of these maps also fulfilled engineering and mission design needs to enable safe and efficient landing and roving. We incorporated data from the Lunar Reconnaissance Orbiter Camera, the Lunar Orbital Laser Altimeter, the Mini-RF instrument, the Chandrayaan-2 Orbital High Resolution Camera, the Korean Pathfinder Lunar Orbiter’s Shadowcam, the Kaguya Spectral Profiler and Multiband Imager, and the Chandrayaan-1 Moon Mineralogy Mapper. We used a variety of techniques to build these maps, including stereogrammetry, shape-from-shading, ice stability depth and surface temperature calculations, and the horizon method for solar illumination and direct-to-Earth communications maps. Altogether, these maps allowed us to survey for boulders, evaluate features in permanently shadowed regions that VIPER might explore, provide mineralogic context for what VIPER’s instruments may learn, estimate the ages and radar properties of craters in the VIPER mission area, and evaluate the potential for gravity traverses with the rover. These data and techniques provided a rich set of information from which both the VIPER science team and engineering teams were able to draw in order to plan a safe landing and to plan a VIPER surface mission that will be both scientifically valuable and robust from an operational perspective.

The Planetary Science Journal↗
USGS1998

Assessment of the hydraulic connection between ground water and the Peace River, west-central Florida

The hydraulic connection between the Peace River and the underlying aquifers along the length of the Peace River from Bartow to Arcadia was assessed to evaluate flow exchanges between these hydrologic systems. Methods included an evaluation of hydrologic and geologic records and seismic-reflection profiles, seepage investigations, and thermal infrared imagery interpretation. Along the upper Peace River, a progressive long-term decline in streamflow has occurred since 1931 due to a lowering of the potentiometric surface of the Upper Floridan aquifer by as much as 60 feet because of intensive ground-water withdrawals for phosphate mining and agriculture. Another effect from lowering the potentiometric surface has been the cessation of flow at several springs located near and within the Peace River channel, including Kissengen Spring, that once averaged a flow of about 19 million gallons a day. The lowering of ground-water head resulted in flow reversals at locations where streamflow enters sinkholes along the streambed and floodplain. Hydrogeologic conditions along the Peace River vary from Bartow to Arcadia. Three distinctive hydrogeologic areas along the Peace River were delineated: (1) the upper Peace River near Bartow, where ground-water recharge occurs; (2) the middle Peace River near Bowling Green, where reversals of hydraulic gradients occur; and (3) the lower Peace River near Arcadia, where ground-water discharge occurs. Seismic-reflection data were used to identify geologic features that could serve as potential conduits for surface-water and ground-water exchange. Depending on the hydrologic regime, this exchange could be recharge of surface water into the aquifer system or discharge of ground water into the stream channel. Geologic features that would provide pathways for water movement were identified in the seismic record; they varied from buried irregular surfaces to large-scale subsidence flexures and vertical fractures or enlarged solution conduits. Generally, the upper Peace River is characterized by a shallow, buried irregular top of rock, numerous observed sinkholes, and subsidence depressions. The downward head gradient provides potential for the Peace River to lose water to the ground-water system. Along the middle Peace River area, head gradients alternate between downward and upward, creating both recharging and discharging ground-water conditions. Seismic records show that buried, laterally continuous reflectors in the lower Peace River pinch out in the middle Peace River streambed. Small springs have been observed along the streambed where these units pinch out. This area corresponds to the region where highest ground-water seepage volumes were measured during this study. Further south, along the lower Peace River, upward head gradients provide conditions for ground-water discharge into the Peace River. Generally, confinement between the surficial aquifer and the confined ground-water systems in this area is better than to the north. However, localized avenues for surface-water and ground-water interactions may exist along discontinuities observed in seismic reflectors associated with large-scale flexures or subsidence features. Ground-water seepage gains or losses along the Peace River were quantified by making three seepage runs during periods of: (1) low base flow, (2) high base flow, and (3) high flow. Low and high base-flow seepage runs were performed along a 74-mile length of the Peace River, between Bartow and Nocatee. Maximum losses of 17.3 cubic feet per second (11.2 million gallons per day) were measured along a 3.2-mile reach of the upper Peace River. The high-flow seepage run was conducted to quantify losses in the Peace River channel and floodplain between Bartow and Fort Meade. Seepage losses calculated during high-flow along a 7.2-mile reach of the Peace River, from the Clear Springs Mine bridge to the Mobil Mine bridge, were approximately 10 percent of the river flow, or 118 cubic feet per second. Calculated seepages along the Peace River in Hardee and De Soto Counties were inconclusive, because most seepages were within the range of discharge measurement error. Two continuous aerial thermal infrared imagery surveys were conducted to locate sites of ground-water discharge along the Peace River. Although temperature and hydrologic conditions were ideal to observe spring flow using thermal infrared imaging techniques, no sources of ground-water discharge were identified using this method. Diffuse ground-water seepage may, however, provide significant ground-water discharge.

Florida↗
USGS2025

Structural setting and geothermal potential of northeastern Reese River Valley, north-central Nevada: Highly prospective detailed study site for the INGENIOUS project

The northeastern part of the Reese River basin situated ~15 km southeast of Battle Mountain, Nevada, scored highly in the Nevada geothermal play fairway analysis (PFA) for hosting potential hidden geothermal systems. This site (also referred to as Argenta Rise) was therefore chosen for detailed study in the INGENIOUS project (INnovative Geothermal Exploration through Novel Investigations Of Undiscovered Systems). The high PFA scores resulted primarily from favorable structural settings (e.g., fault intersections and pull aparts) with relatively high slip rates on Quaternary faults. The INGENIOUS project is utilizing additional parameters and more rigorous analytical techniques to further advance exploration at this site. This includes integration of geological (e.g., Quaternary fault mapping) and new geophysical datasets (e.g., gravity, magnetics, MT data, and five reprocessed seismic reflection profiles) to build a structural model and to identify specific favorable sites for potential geothermal upwellings. Two-meter temperature surveys were also conducted in the area (139 measurements). This part of north-central Nevada is characterized by systems of intersecting northerly and ENE-striking faults within the broader Humboldt structural zone, a poorly understood belt of ENE-striking faults and relatively high heat flow extending across northern Nevada. Kinematic analysis of exposed fault surfaces shows that ENE-striking faults have accommodated sinistral-normal slip, and normal slip characterizes N- to NNE-striking faults. Northeastern Reese River Valley lies within a broad left step between major ENE-striking fault zones on the northern flanks of the Argenta Rim and Shoshone Range and thus corresponds to a broad pull-apart in the ENE-striking sinistral-normal fault system. Notably, the nearby Beowawe geothermal system in Whirlwind Valley (with abundant sinter, hot springs, and a geothermal power plant) occupies a fault intersection in a relatively small left step in a major ENE-striking sinistral-normal fault and may serve as an analogue for a potential hidden system in northeastern Reese River Valley. Existing geological maps, high-resolution lidar, and seismic reflection data demonstrate that northeastern Reese River Valley is structurally complex with multiple intersections between the ENE- and N- to NNE-striking fault systems. Some of these fault intersections correspond to low resistivity anomalies, magnetic lows, and/or very subtle 2-m temperature anomalies, which may indicate hidden geothermal upwellings. Three-dimensional modeling and temperature-gradient drilling are planned to further evaluate these sites for geothermal activity.

Nevada↗