SEARCH · Geology Reports

Results for “Studies in Maine Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59Linked to original sources

USGS1994

Principal reference section for part of the Eocene Ghazij Formation, Sarawan River area, Johan coal field, Balochistan, Pakistan

The information presented on this sheet was collected as part of a joint U.S. Geological Survey-Geological Survey of Pakistan program sponsored by the U.S. Agency for International Development. As a project within this program, the coal-bearing Ghazij Formation (Eocene) was investigated in the northeastern part of Balochistan cast and south of the provincial capital of Quetta. Strata exposed in this area range in age from Permian to Holocene and crop out as a belt of folded and thrusted rocks that form a southeast-facing orocline. In this region of Pakistan, the Ghazij can usually be divided into three parts. The lower part is the thickest (probably more than 1,000 m) and consists of gray-weathering calcareous mudrock (shale, mudstone, and impure claystone) and a few tabular bodies of fine-to medium-grained calcareous sandstone. The middle part (27-300 m) consists of gray-weathering calcareous mudrock and tabular to lenticular bodies of fine-to medium-grained calcareous sandstone; beds of carbonaceous shale and coal are common. The upper part (as thick as 533 m) contains reddish-weathering calcareous mudrock that contains scattered lenticular bodies of fine- to medium-grained calcareous sandstone. Fossil plant debris is common in mudrock of the lower and middle parts of the Ghazij, and bivalves and gastropods are common in the middle part; the upper part of the Ghazij is usually unfossiliferous. This three-fold division of the Ghazij is less distinct in the Johan area. Here, the upper part of the formation is clearly identifiable, but rocks below it are poorly exposed and assigning a stratigraphic level that separates the middle and lower parts of the formation is problematic. Below the upper part of the formation is a thick sequence of greenish-gray calcareous mudrock that contains locally abundant plant debris and isolated bodies of brown-weathering sandstone. Rare carbonaceous shale and even rarer coal are present in the upper part of this sequence, and this interval of the formation might correspond to the middle part of the Ghazji exposed in areas to the north. We propose that, in the Johan area, those rocks below the upper part of the formation be referred to as the main body of the Ghazij (for example, main-body Ghazij). Underlying the Ghazij are the carbonate rocks of the Paleocene Dungan Formation (or its equivalent), and overlying the Ghazij are the mostly carbonate rocks of the Eocene Kirthar Formation (or its equivalent). Both contacts can be conformable or unconformable. All of the pre-Neogene rocks in Balochistan are greatly deformed by the collision of India and Asia. The Ghazij is especially susceptible to regional compressional tectonics because it contains a large amount of shale and is sandwiched between two thick carbonate units. As a result, bedding-plane faults and isoclinal folds are common. As part of our study of the Ghazij Formation, five stratigraphic sections were measured: one near Pir Ismail Ziarat, one in the Sor Range, two in the vicinity of Mach, and one near Johan. Each area's section is published separately.

Balochistan↗

USGS2007

Preliminary Earthquake Hazard Map of Afghanistan

Introduction Earthquakes represent a serious threat to the people and institutions of Afghanistan. As part of a United States Agency for International Development (USAID) effort to assess the resource potential and seismic hazards of Afghanistan, the Seismic Hazard Mapping group of the United States Geological Survey (USGS) has prepared a series of probabilistic seismic hazard maps that help quantify the expected frequency and strength of ground shaking nationwide. To construct the maps, we do a complete hazard analysis for each of ~35,000 sites in the study area. We use a probabilistic methodology that accounts for all potential seismic sources and their rates of earthquake activity, and we incorporate modeling uncertainty by using logic trees for source and ground-motion parameters. See the Appendix for an explanation of probabilistic seismic hazard analysis and discussion of seismic risk. Afghanistan occupies a southward-projecting, relatively stable promontory of the Eurasian tectonic plate (Ambraseys and Bilham, 2003; Wheeler and others, 2005). Active plate boundaries, however, surround Afghanistan on the west, south, and east. To the west, the Arabian plate moves northward relative to Eurasia at about 3 cm/yr. The active plate boundary trends northwestward through the Zagros region of southwestern Iran. Deformation is accommodated throughout the territory of Iran; major structures include several north-south-trending, right-lateral strike-slip fault systems in the east and, farther to the north, a series of east-west-trending reverse- and strike-slip faults. This deformation apparently does not cross the border into relatively stable western Afghanistan. In the east, the Indian plate moves northward relative to Eurasia at a rate of about 4 cm/yr. A broad, transpressional plate-boundary zone extends into eastern Afghanistan, trending southwestward from the Hindu Kush in northeast Afghanistan, through Kabul, and along the Afghanistan-Pakistan border. Deformation here is expressed as a belt of major, north-northeast-trending, left-lateral strike-slip faults and abundant seismicity. The seismicity intensifies farther to the northeast and includes a prominent zone of deep earthquakes associated with northward subduction of the Indian plate beneath Eurasia that extends beneath the Hindu Kush and Pamirs Mountains. Production of the seismic hazard maps is challenging because the geological and seismological data required to produce a seismic hazard model are limited. The data that are available for this project include historical seismicity and poorly constrained slip rates on only a few of the many active faults in the country. Much of the hazard is derived from a new catalog of historical earthquakes: from 1964 to the present, with magnitude equal to or greater than about 4.5, and with depth between 0 and 250 kilometers. We also include four specific faults in the model: the Chaman fault with an assigned slip rate of 10 mm/yr, the Central Badakhshan fault with an assigned slip rate of 12 mm/yr, the Darvaz fault with an assigned slip rate of 7 mm/yr, and the Hari Rud fault with an assigned slip rate of 2 mm/yr. For these faults and for shallow seismicity less than 50 km deep, we incorporate published ground-motion estimates from tectonically active regions of western North America, Europe, and the Middle East. Ground-motion estimates for deeper seismicity are derived from data in subduction environments. We apply estimates derived for tectonic regions where subduction is the main tectonic process for intermediate-depth seismicity between 50- and 250-km depth. Within the framework of these limitations, we have developed a preliminary probabilistic seismic-hazard assessment of Afghanistan, the type of analysis that underpins the seismic components of modern building codes in the United States. The assessment includes maps of estimated peak ground-acceleration (PGA), 0.2-second spectral acceleration (SA), and 1.0-secon

Open-File Report↗

USGS1973

Variations in Sr, Rb, K, Na, and Initial Sr87/Sr86 in Mesozoic Granitic Rocks and Intruded Wall Rocks in Central California

Initial Sr 87 /Sr 86 of granitic rocks which are exposed north of the Garlock fault in California, and which represent the entire 130-m.y. time span of emplacement during the Mesozoic, ranges mainly from 0.7031 to 0.7082, with one value of 0.7094. A systematic areal variation, independent of age, exists for initial Sr 87 /Sr 86 in these granitic rocks and is the same as the areal variation in initial Sr 87 /Sr 86 of superjacent upper Cenozoic basalts and andesites. Two values of initial Sr 87 /Sr 86 , 0.7040 and 0.7060, mark natural separations of granitic rock data on K-Rb, K-Sr, and Rb/Sr-Rb variation diagrams, and also, when contoured, seem to represent geographic markers of paleo-geographic, geochemical, and physiographic significance. Upper Precambrian sedimentary and metamorphic rocks in California crop out only in the region where initial Sr 87 /Sr 86 of granitic rocks is greater than 0.7060. A line of initial Sr 87 /Sr 86 = 0.7060 is approximately coincident with the boundary between Paleozoic eugeosynclinal and miogeosynclinal rocks. Granitic rocks intruded into Paleozoic miogeosynclinal rocks have initial Sr 87 /Sr 86 greater than 0.7060, whereas those intruded into eugeosynclinal Paleozoic rocks have initial Sr 87 /Sr 86 less than 0.7060. The line of initial Sr 87 /Sr 86 = 0.7040 is the eastern limit of principal exposures of ultramafic rocks, the western limit of Cretaceous granitic rocks, and is coincident with an abrupt change in “topographic expression” on the Bouguer gravity map of California. Correlation of the isotopic variations with these major crustal features suggests that there has been a sharp lateral contrast in crust-mantle chemistry across the region of study that has been fixed in position from the Precambrian to the present time. The chemical and isotopic variations observed are best explained if the parent magmas of the majority of granitic rocks investigated were derived in a region that was laterally variable in composition and in a zone of melting that intersected both upper mantle and lower crust. However, some igneous rocks, such as Jurassic volcanic rocks in wall rocks and roof pendants and some granitic rocks with high strontium concentrations and low Rb-Sr ratios, suggest that deeper sources are also involved in the total spectrum of igneous rocks in the region.

California↗

USGS2011

Effects of recreational flow releases on natural resources of the Indian and Hudson Rivers in the Central Adirondack Mountains, New York, 2004-06

The U.S. Geological Survey (USGS), the New York State Department of Environmental Conservation (NYSDEC), and Cornell University carried out a cooperative 2-year study from the fall of 2004 through the fall of 2006 to characterize the potential effects of recreational-flow releases from Lake Abanakee on natural resources in the Indian and Hudson Rivers. Researchers gathered baseline information on hydrology, temperature, habitat, nearshore wetlands, and macroinvertebrate and fish communities and assessed the behavior and thermoregulation of stocked brown trout in study reaches from both rivers and from a control river. The effects of recreational-flow releases (releases) were assessed by comparing data from affected reaches with data from the same reaches during nonrelease days, control reaches in a nearby run-of-the-river system (the Cedar River), and one reach in the Hudson River upstream from the confluence with the Indian River. A streamgage downstream from Lake Abanakee transmitted data by satellite from November 2004 to November 2006; these data were used as the basis for developing a rating curve that was used to estimate discharges for the study period. River habitat at most study reaches was delineated by using Global Positioning System and ArcMap software on a handheld computer, and wetlands were mapped by ground-based measurements of length, width, and areal density. River temperature in the Indian and Hudson Rivers was monitored continuously at eight sites during June through September of 2005 and 2006; temperature was mapped in 2005 by remote imaging made possible through collaboration with the Rochester Institute of Technology. Fish communities at all study reaches were surveyed and characterized through quantitative, nearshore electrofishing surveys. Macroinvertebrate communities in all study reaches were sampled using the traveling-kick method and characterized using standard indices. Radio telemetry was used to track the movement and persistence of stocked brown trout (implanted with temperature-sensitive transmitters) in the Indian and Hudson Rivers during the summer of 2005 and in all three rivers during the summer of 2006. The releases had little effect on river temperatures, but increased discharges by about one order of magnitude. Regardless of the releases, river temperatures at all study sites commonly exceeded the threshold known to be stressful to brown trout. At most sites, mean and median water temperatures on release days were not significantly different, or slightly lower, than water temperatures on nonrelease days. Most differences were very small and, thus, were probably not biologically meaningful. The releases generally increased the total surface area of fast-water habitat (rapids, runs, and riffles) and decreased the total surface area of slow-water habitat (pools, glides, backwater areas, and side channels). The total surface areas of wetlands bordering the Indian River were substantially smaller than the surface areas bordering the Cedar River; however, no channel geomorphology or watershed soil and topographic data were assessed to determine whether the releases or other factors were mainly responsible for observed differences. Results from surveys of resident biota indicate that the releases generally had a limited effect on fish and macroinvertebrate communities in the Indian River and had no effect on communities in the Hudson River. Compared to fish data from Cedar River control sites, the impoundment appeared to reduce total density, biomass, and richness in the Indian River at the first site downstream from Lake Abanakee, moderately reduce the indexes at the other two sites on the Indian River, and slightly reduce the indexes at the first Hudson River site downstream from the confluence with the Indian River. The densities of individual fish populations at all Indian River sites were also reduced, but related effects on fish populations in the Hudson River were less evident. Altho

Scientific Investigations Report↗

USGS1971

Aeromagnetic study of the midcontinent gravity high of central United States

A composite map of detailed aeromagnetic surveys over the midcontinent gravity high provides coverage of the 600-mi-long buried belt of mafic rocks of the Keweenawan Series from their outcrop localities in Minnesota and Wisconsin through Iowa and Nebraska. A map of the subsurface extent of the mafic rocks, based on the intricate magnetic patterns, shows that the rocks form a long, semicontinuous block, averaging 40 mi wide and consisting mainly of a sequence of layered flows. This sequence is probably fault-bounded and has been tilted up along the margins, where the linearity of the anomalies indicates steeper dips. The associated clastic rocks, indicated by a smoother magnetic pattern, occur in basins along both sides of the mafic belt and in grabens and a series of axial basins on the upper surface of the block. The well-defined outliers of flows marginal to the main block and the truncation of some of the outermost flow units along a diagonal boundary striking at an angle to them suggest that the present boundaries of the block are postdepositional structural features. The basins and the edges of the block appear to have controlled later, largely vertical movement in the overlying Paleozoic and younger sedimentary cover. Calculated models based on coincident magnetic and detailed gravity profiles along typical cross sections of the midcontinent gravity high show that the block of mafic rocks is steep-sided and as much as several miles thick. The free-air gravity anomaly, which consists of a large positive maximum flanked by minima, averages very close to zero, indicating that this major crustal feature is regionally compensated, although locally each of its components shows a large departure from equilibrium. Remanent magnetization is a primary factor in the interpretation of the magnetic data. Magnetic property studies of Keweenawan mafic rocks in the Lake Superior region show that remanent magnetization may be five times the magnetization induced by the present Earth's field and differs from it radically in direction. This magnetization was acquired before the flows were tilted into their present positions. A computed magnetic profile shows that a trough of flows with such a magnetization and inward-dipping limbs can account for the observed persistent lows along the western edge of the block, the relatively low magnetic values along the axis of the block, and the large positive anomaly along the eastern side of the block. Flows as much as 1 mi thick near the base of the sequence have a remanent magnetization with a nearly opposite polarity. This reverse polarity has been measured on both sides of Lake Superior and is probably also present farther south, particularly in Iowa where the outer units of the block in an area north of Des Moines give rise to a prominent magnetic low. The axis of this long belt of Keweenawan mafic rocks cuts discordantly through the prevailing east-west-trending fabric of the older Precambrian terrane from southern Kansas to Lake Superior. This belt has several major left-lateral offsets, one of which produces a complete hiatus in the vicinity of the 40th parallel where an east-west transcontinental rift or fracture zone has been proposed. The axial basins of clastic rocks are outlined by linear magnetic anomalies and show a concordant relation to the structure of the mafic flows. These basins are oriented at an angle to the main axis, suggesting that the entire feature originated as a major rift composed of a series of short, linear, en echelon segments with offsets similar to the transform faults characterizing the present mid-ocean rift system. This midcontinent rift may well have been part of a Keweenawan global rift system with initial offsets consisting of transform faults along pre-existing fractures, but apparently it never fully developed laterally into an ocean basin, and the upwelling mafic material was localized along a relatively narrow belt.

Geological Society of America Bulletin↗

USGS1999

Surface-water-quality assessment of the Yakima River basin, Washington: Overview of major findings, 1987-91

Surface-water-quality conditions were assessed in the Yakima River Basin, which drains 6,155 square miles of mostly forested, range, and agricultural land in Washington. The Yakima River Basin is one of the most intensively farmed and irrigated areas in the United States, and is often referred to as the “Nation’s Fruitbowl.” Natural and anthropogenic sources of contaminants and flow regulation control water-quality conditions throughout the basin. This report summarizes the spatial and temporal distribution, sources, and implications of the dissolved oxygen, water temperature, pH, suspended sediment, nutrient, organic compound (pesticide), trace element, fecal indicator bacteria, radionuclide, and aquatic ecology data collected during the 1987–91 water years. The Yakima River descends from a water surface altitude of 2,449 feet at the foot of Keechelus Dam to 340 feet at its mouth downstream from Horn Rapids Dam near Richland. The basin can be divided into three distinct river reaches on the basis of its physical characteristics. The upper reach, which drains the Kittitas Valley, has a high gradient, with an average streambed slope of 14 feet per mile (ft/mi) over the 74 miles from the foot of Keechelus Dam (river mile [RM] 214.5) to just upstream from Umtanum. The middle reach, which drains the Mid Valley, extends a distance of 33 miles from Umtanum (RM 140.4) to just upstream from Union Gap and also has a high gradient, with an average streambed slope of 11 ft/mi. The lower reach of the Yakima River drains the Lower Valley and has an average streambed slope of 7 ft/mi over the 107 miles from Union Gap (RM 107.2) to the mouth of the Yakima River. These reaches exhibited differences in water-quality conditions related to the differences in geologic sources of contaminants and land use. Compared with the rest of the basin, the Kittitas Valley and headwaters of the Naches River Subbasin had relatively low concentrations and loads of suspended sediment, nutrients, organic compounds, and fecal indicator bacteria. There were very few failures to meet the Washington State dissolved oxygen standard or exceedances of the water temperature and pH standards in this reach. In general, these areas are considered to be areas of lessdegraded water quality in the basin. The preTertiary metamorphic and intrusive rocks of the Cle Elum and Teanaway River Subbasins, however, were found to be significant geologic sources of antimony, arsenic, chromium, copper, mercury, nickel, selenium, and zinc. As a result, the arsenic, chromium, and nickel concentrations measured in the streambed sediment of the Kittitas Valley were 13 to 74 times higher than those measured in the Lower Valley. The Mid and Lower Valleys had similar water-quality conditions, governed by the intensive agricultural and irrigation activities, highly erosive landscapes, and flow regulation. Most of the failures to meet the Washington State standards for dissolved oxygen and exceedances of the standards for water temperature and pH occurred in the Mid and Lower Valleys. Agricultural drains in the Mid and Lower Valleys were found to be significant sources of nutrients, suspended sediment, pesticides, and fecal indicator bacteria. Downstream from the irrigation diversions near Union Gap, summertime streamflow in the Yakima River was drastically reduced to only a few hundred cubic feet per second. In the lower Yakima River, agricultural return flow typically accounts for as much as 80 percent of the main stem summertime flow near the downstream terminus of the basin. Therefore, the water-quality characteristics of the lower Yakima River resemble those of the agricultural drains. The highest fecal bacteria concentrations (35,000 colonies of Escherichia coli per 100 milliliters of water) were measured in the Granger/Sunnyside area, the location of most of the livestock in the basin. The east side area of the Lower Valley (area east of the Yakima River) was the predominant source area for suspended sediment and pesticides in the basin. This area had the largest acreage of irrigated land and generally received the largest application of pesticides. Owing to the highly erosive soils of the area, the suspended sediment load from the east side in June 1989 (320 kilograms per day) was five or more times larger than from any other area, and the loads of several of the more hydrophobic organic compounds were four or more times larger. An ecological assessment of the Yakima River Basin ranked physical, chemical, and biological conditions at impaired (degraded) sites against reference sites in an effort to understand how land use changes physical and chemical site characteristics and how biota respond to these changes. For this assessment, the basin was divided into four natural ecological categories: (1) Cascades ecoregion, (2) Eastern Cascades Slopes and Foothills ecoregion, (3) Columbia Basin ecoregion, and (4) large rivers. Each of these categories has a unique combination of climate and landscape features that produces a distinctive terrestrial vegetation assemblage. In the combined Cascades and Eastern Cascades site group, which had the fewest impaired sites, the metals index was the only physical and chemical index that indicated any impairment. The moderate levels of impairment noted in the invertebrate and algal communities were not, however, associated with metals, and may have been related to the effects of logging, although the intensity of logging was not directly quantified in this study. Sites in the Columbia Basin site group were all moderately or severely impaired with the exception of the two reference sites (Umtanum Creek and Satus Creek below Dry Creek), which showed no physical, chemical, or biological impairment. Three sites were heavily affected by agriculture (Granger Drain, Moxee Drain, and Spring Creek) and were listed as severely impaired by most of the physical, chemical, and biological condition indices. Agriculture was the primary cause of the impairment of biological communities in this site group. The primary physical and chemical indicators of agricultural effects were nutrients, pesticides, dissolved solids, and substrate embeddedness, which all tended to increase with agricultural intensity. The biological effects of agriculture were manifested by a decrease in the abundance and number of native species of fish and invertebrates, a shift in algal communities to species indicative of eutrophic conditions, and higher abundances. There was also an increase in the abundance and number of nonnative fish species due to the prevalence of fish that are largely tolerant of nutrient-rich conditions. Main stem (large river) sites downstream from the city of Yakima exhibited severe impairment of fish communities associated with high levels of pesticides in fish tissues and the presence of external anomalies on fish.

Washington↗

USGS2003

Main-channel slopes of selected streams in Iowa for estimation of flood-frequency discharges

This report describes a statewide study conducted to develop main-channel slope (MCS) curves for 138 selected streams in Iowa with drainage areas greater than 100 square miles. MCS values determined from the curves can be used in regression equations for estimating floodfrequency discharges. Multivariable regression equations previously developed for two of the three hydrologic regions defined for Iowa require the measurement of MCS. Main-channel slope is a difficult measurement to obtain for large streams using 1:24,000-scale topographic maps. The curves developed in this report provide a simplified method for determining MCS values for sites located along large streams in Iowa within hydrologic Regions 2 and 3. The curves were developed using MCS values quantified for 2,058 selected sites along 138 selected streams in Iowa. A geographic information system (GIS) technique and 1:24,000-scale topographic data were used to quantify MCS values for the stream sites. The sites were selected at about 5-mile intervals along the streams. River miles were quantified for each stream site using a GIS program. Data points for river-mile and MCS values were plotted and a best-fit curve was developed for each stream. An adjustment was applied to all 138 curves to compensate for differences in MCS values between manual measurements and GIS quantifications. The multivariable equations for Regions 2 and 3 were developed using manual measurements of MCS. A comparison of manual measurements and GIS quantifications of MCS indicates that manual measurements typically produce greater values of MCS compared to GIS quantifications. Median differences between manual measurements and GIS quantifications of MCS are 14.8 and 17.7 percent for Regions 2 and 3, respectively. Comparisons of percentage differences between flood-frequency discharges calculated using MCS values of manual measurements and GIS quantifications indicate that use of GIS values of MCS for Region 3 substantially underestimate flood discharges. Mean and median percentage differences for 2- to 500-year recurrence- interval flood discharges ranged from 5.0 to 5.3 and 4.3 to 4.5 percent, respectively, for Region 2 and ranged from 18.3 to 27.1 and 12.3 to 17.3 percent for Region 3. The MCS curves developed from GIS quantifications were adjusted by 14.8 percent for streams located in Region 2 and by 17.7 percent for streams located in Region 3. Comparisons of percentage differences between flood discharges calculated using MCS values of manual measurements and adjusted-GIS quantifications for Regions 2 and 3 indicate that the flood-discharge estimates are comparable. For Region 2, mean percentage differences for 2- to 500-year recurrence- interval flood discharges ranged between 0.6 and 0.8 percent and median differences were 0.0 percent. For Region 3, mean and median differences ranged between 5.4 to 8.4 and 0.0 to 0.3 percent, respectively. A list of selected stream sites presented with each curve provides information about the sites including river miles, drainage areas, the location of U.S. Geological Survey streamflowgaging stations, and the location of streams crossing hydrologic region boundaries or the Des Moines Lobe landform region boundary. Two examples are presented for determining river-mile and MCS values, and two techniques are presented for computing flood-frequency discharges.

Iowa↗

USGS1968

Geology of the Great Smoky Mountains National Park, Tennessee and North Carolina

The boundary between Tennessee and North Carolina is delimited for about 50 miles in midlength by the crests of the Great Smoky Mountains, which include some of the highest summits in the southeastern United States, and which culminate in Clingmans Dome (alt 6,642 ft). Ramifying spurs and foothills descend northwestward from the State line divide toward the Appalachian Valley in Tennessee, as well as southeastward toward the less regularly disposed mountains of the main part of the Blue Ridge in North Carolina. All the Great Smoky Mountains are heavily forested, the higher summits being covered by spruce and fir, and the lower slopes, by a great variety of hardwoods. Much of this forested mountain wilderness has been set aside for public benefit and enjoyment as Great Smoky Mountains National Park. For most visitors to Great Smoky Mountains National Park, prime attractions are its noble forests, its open coves set gemlike amongst them, the animals of the forests and coves, and the relics of the mountaineers who have made their homes there. Only now and then, when the visitor's trail through the forest must circuit a rough ledge of rock, can he realize that the forest and the soil on which it grows are a mere veneer—a thin cover over the ancient rocks of the mountains. In the Yosemite, the Grand Canyon, and most of our other national parks in the West, the situation is very different; there, the impact of the bedrock of the parks is overwhelming in relation to the plants and animals that live on the bedrock. The terrain of the Great Smoky Mountains, their soils, unconsolidated deposits, and details of slope sculpture tell a geologic story of the last few million years of earth history, a story dominated by the drastic fluctuations of the ice-age climate. Although the mountains themselves were not covered with glacial ice, the climate at this latitude approached glacial conditions, and the mountaintops were occasionally above tree line. Deposits of debris that resulted from the associated accelerated erosion of the hillsides during glacial intervals and the deeply weathered soils produced during the episodes of warm and humid interglacial climate are evident at many places. These climatic oscillations also controlled the flora and fauna. The complex process of adjustment of plants and animals to the prevailing climate is one of the factors that has produced their present great diversity. This latest phase of the geologic history is not further treated in this publication. Maps showing the younger deposits and interpretations based on them are included in the several recent U.S. Geological Survey Professional Papers referred to below. Our concern in this text and its accompanying map (pl. 1) is with the bedrock geology of the Great Smoky Mountains and their surroundings, and with the story of far earlier times in earth history—when there were no Great Smoky Mountains, and when the geography and the landscape were very different from those today. Because of the forest cover and the scantiness of rock outcrops, the bedrock geology of the Great Smoky Mountains is not easy to decipher, and this difficulty is compounded by the enigmatic nature of most of the rocks themselves. It thus has come about that knowledge of the geology of the mountains has lagged behind that in surrounding regions. Following pioneer investigations of Safford (1869) and of Keith (1895, 1896), little further geologic study of the mountains was made until after World War II. The present text and map summarize the results of the more recent investigations, details of which are given at much greater length in a set of U.S. Geological Survey Professional Papers (Hamilton, 1961; Hadley and Goldsmith, 1963; King, 1964; Neuman and Nelson, 1965).

North Carolina, Tennessee↗

USGS1984

Hydrology of Area 62, Northern Great Plains and Rocky Mountain Coal Provinces, New Mexico and Arizona

This report summarizes available hydrologic data for Area 62 and will aid leasing decisions, and the preparation and appraisal of environmental impact studies and mine-permit applications. Area 62 is located at the southern end of the Rocky Mountain Coal Province in parts of New Mexico and Arizona and includes approximately 9,500 square miles. Surface mining alters, at least temporarily, the environment; if the areas are unreclaimed, there can be long-term environmental consequences. The land-ownership pattern in Area 62 is complicated. The checkerboard pattern created by several types of ownership makes effective management of these lands difficult. The climate generally is semiarid with average annual precipitation ranging from 10 to 20 inches. Pinons, junipers, and grasslands cover most of the area, and much of it is used for grazing by livestock. Soils vary with landscape, differing from flood plains and hillslopes to mountain slopes. The major structural features of this area were largely developed during middle Tertiary time. The main structural features are the southern San Juan Basin and the Mogollon slope. Coal-bearing rocks are present in four Cretaceous rock units of the Mesaverde Group: the Gallup Sandstone, the Dileo Coal Member, and the Gibson Coal Member of the Crevasse Canyon Formation, and the Cleary Coal Member of the Menefee Formation. Area 62 is drained by Black Creek, the Puerco River, the Zuni River, Carrizo Wash-Largo Creek, and the Rio San Jose. Only at the headwaters of the Zuni River is the flow perennial. The streamflow-gaging station network consists of 25 stations operated for a variety of needs. Streamflow changes throughout the year with variation related directly to rainfall and snowmelt. Base flow in Area 62 is zero indicating no significant ground-water discharge. Mountainous areas contribute the highest mean annual runoff of 1.0 inch. Very few water-quality data are available for the surface-water stations. Of the nine surface-water stations that have water-quality data, only one has chemical analyses from more than 10 samples. Therefore, sufficient data to characterize the area in detail are not available. Suspended sediment data are available only for a few surface- water stations in the area. Erosion rates generally are less than 1 acre-foot per square mile per year. Greater erosion rates are found within the badland areas. Water levels are periodically measured at 21 selected wells in Area 62. These observation wells are located mostly along the Rio San Jose and northeast of Gallup, New Mexico. The recharge to ground-water aquifers generally coincide with areas of greater precipitation in the mountainous areas. Depth to water below land surface is generally less than 200 feet. Well yields of 100 gallons per minute are common in most of the area. Ground-water quality is variable both within each aquifer and between aquifers. Water quality generally is best near recharge areas. Historical and current data related to stream discharge, water quality, and suspended sediment are available from computer files in the U.S. Geological Survey's National Water Data Storage and Retrieval System (WATSTORE) and through the National Water Data Exchange (NAWDEX).

Open-File Report↗

USGS1984

Hydrology of Area 62, Northern Great Plains and Rocky Mountain Coal Provinces, New Mexico and Arizona

Water-Resources Investigations Report↗

USGS1989

Simulation of rainfall-runoff response in mined and unmined watersheds in coal areas of West Virginia

Meteorologic and hydrologic data from five small watersheds in the coal areas of West Virginia were used to calibrate and test the U.S. Geological Survey Precipitation-Runoff Modeling System for simulating streamflow under various climatic and land-use conditions. Three of the basins--Horsecamp Run, Gilmer Run, and Collison Creek--are primarily forested and relatively undisturbed. The remaining basins--Drawdy Creek and Brier Creek-are extensively mined, both surface and underground above stream drainage level. Low-flow measurements at numerous synoptic sites in the mined basins indicate that coal mining has substantially altered the hydrologic system of each basin. The effects of mining on streamflow that were identified are (1) reduced base flow in stream segments underlain by underground mines, (2) increased base flow in streams that are downdip and stratigraphically below the elevation of the mined coal beds, and (3) interbasin transfer of ground water through underground mines. These changes probably reflect increased permeability of surface rocks caused by subsidence fractures associated with collapsed underground mines in the basin. Such fractures would increase downward percolation of precipitation, surface and subsurface flow, and ground-water flow to deeper rocks or to underground mine workings. Model simulations of the water budgets for the unmined basins during the 1972-73 water years indicate that total annual runoff averaged 60 percent of average annual precipitation; annual evapotranspiration losses averaged 40 percent of average annual precipitation. Of the total annual runoff, approximately 91 percent was surface and subsurface runoff and 9 percent was groundwater discharge. Changes in storage in the soil zone and in the subsurface and ground-water reservoirs in the basins were negligible. In contrast, water-budget simulations for the mined basins indicate significant differences in annual recharge and in total annual runoff. Model simulations of the water budget for Drawdy Creek basin indicate that total annual runoff during 1972-73 averaged only 43 percent of average annual precipitation--the lowest of all study basins; annual evapotranspiration losses averaged 49 percent, and interbasin transfer of ground-water losses averaged about 8 percent. Of the total annual runoff, approximately 74 percent was surface and subsurface flow and 26 percent was ground-water discharge. The low total annual runoff at Drawdy Creek probably reflects increased recharge of precipitation and surface and subsurface flow losses to ground water. Most of the increase in ground-water storage is, in turn, lost to a ground-water sink--namely, interbasin transfer of ground water by gravity drainage and (or) mine pumpage from underground mines that extend to adjacent basins. Hypothetical mining situations were posed for model analysis to determine the effects of increased mining on streamflow in the mined basins. Results of model simulations indicate that streamflow characteristics, the water budget, and the seasonal distribution of streamflow would be significantly modified in response to an increase in mining in the basins. Simulations indicate that (1) total annual runoff in the basins would decrease because of increased surface- and subsurface-flow losses and increased recharge of precipitation to ground water (these losses would tend to reduce medium to high flows mainly during winter and spring when losses would be greatest), (2) extreme high flows in response to intense rainstorms would be negligibly affected, regardless of the magnitude of mining in the basins, (3) ground-water discharge also would decrease during winter and spring, but the amount and duration of low flows during summer and fall would substantially increase in response to increased ground-water storage in rocks and in underground mines, and (4) the increase in ground-water storage in the basins would be depleted, mostly by increased losses to a grou

Water Supply Paper↗

USGS2014

Geophysical investigations of the geologic and hydrothermal framework of the Pilgrim Springs Geothermal Area, Alaska

Pilgrim Hot Springs, located on the Seward Peninsula in west-central Alaska, is characterized by hot springs, surrounding thawed regions, and elevated lake temperatures. The area is of interest because of its potential for providing renewable energy for Nome and nearby rural communities. We performed ground and airborne geophysical investigations of the Pilgrim Springs geothermal area to identify areas indicative of high heat flow and saline geothermal fluids, and to map key structures controlling hydrothermal fluid flow. Studies included ground gravity and magnetic measurements, as well as an airborne magnetic and frequency-domain electromagnetic (EM) survey. The structural and conceptual framework developed from this study provides critical information for future development of this resource and is relevant more generally to our understanding of geothermal systems in active extensional basins. Potential field data reveal the Pilgrim area displays a complex geophysical fabric reflecting a network of intersecting fault and fracture sets ranging from inherited basement structures to Tertiary faults. Resistivity models derived from the airborne EM data reveal resistivity anomalies in the upper 100 m of the subsurface that suggest elevated temperatures and the presence of saline fluids. A northwest trending fabric across the northeastern portion of the survey area parallels structures to the east that may be related to accommodation between the two major mountain ranges south (Kigluaik) and east (Bendeleben) of Pilgrim Springs. The area from the springs southward to the range front, however, is characterized by east-west trending, range-front-parallel anomalies likely caused by late Cenozoic structures associated with north-south extension that formed the basin. The area around the springs (~10 km2 ) is coincident with a circular magnetic high punctuated by several east-west trending magnetic lows, the most prominent occurring directly over the springs. These features possibly result from hydrothermal alteration imposed by fluids migrating along intra-basin faults related to recent north-south extension. The Pilgrim River valley is characterized by a NE-elongate gravity low that reveals a basin extending to depths of ~300 m beneath Pilgrim Springs and deepening to ~800 m to the southwest. The margins of the gravity low are sharply defined by northeasttrending gradients that probably reflect the edges of fault-bounded structural blocks. The southeastern edge of the low, which lies very close to the springs, also corresponds with prominent NE-striking anomalies seen in magnetic and resistivity models. Together, these features define a structure we refer to as the Northeast Fault. The location of the hot springs appears to be related to the intersection of the Northeast Fault with a N-oriented structure marked by the abrupt western edge of a resistivity low surrounding the hot springs. While the hot springs represent the primary outflow of geothermal fluids, additional outflow extends from the springs northeast along the Northeast fault to another thaw zone that we interpret to be a secondary region of concentrated upflow of geothermal fluids. The Northeast Fault apparently controls shallow geothermal fluid flow, and may also provide an important pathway conveying deep fluids to the shallow subsurface. We suggest that geothermal fluids may derive from a reservoir residing beneath the sediment basin southwest of the springs. If so, the shape of the basin, which narrows and shallows towards the springs, may funnel fluids beneath the springs where they intersect the Northeast Fault allowing them to reach the surface. An alternative pathway for reservoir fluids to reach intermediate to shallow depths may be afforded by the main Kigluaik range front fault that coincides with a resistivity anomaly possibly resulting from fluid flow and associated hydrothermal mineralization occurring within the fault zone.

Conference Paper↗

USGS2002

Evaluation of airborne thermal-infrared image data for monitoring aquatic habitats and cultural resources within the Grand Canyon

This study examined thermal-infrared (TIR) image data acquired using the airborne Advanced Thematic Mapper (ATM) sensor in the afternoon of July 25th, 2000 over a portion of the Colorado River corridor to determine the capability of these 100-cm resolution data to address some biologic and cultural resource requirements for GCMRC. The requirements investigated included the mapping of warm backwaters that may serve as fish habitats and the detection (and monitoring) of archaeological structures and natural springs that occur on land. This report reviews the procedure for calibration of the airborne TIR data to obtain surface water temperatures and shows the results for various river reaches within the acquired river corridor. With respect to mapping warm backwater areas, our results show that TIR data need to be acquired with a gain setting that optimizes the range of temperatures found within the water to increase sensitivity of the resulting data to a level of 0.1 °C and to reduce scan-line noise. Data acquired within a two-hour window around maximum solar heating (1:30 PM) is recommended to provide maximum solar heating of the water and to minimize cooling effects of late-afternoon shadows. Ground-truth data within the temperature range of the warm backwaters are necessary for calibration of the TIR data. The ground-truth data need to be collected with good locational accuracy. The derived water-temperature data provide the capability for rapid, wide-area mapping of warm-water fish habitats using a threshold temperature for such habitats. The collected daytime TIR data were ineffective in mapping (detecting) both archaeological structures and natural springs (seeps). The inability of the daytime TIR data to detect archaeological structures is attributed to the low thermal sensitivity (0.3 °C) of the collected data. The detection of subtle thermal differences between geologic materials requires sensitivities of at least 0.1 °C, which can be obtained by most TIR sensors using an appropriate gain setting. Simultaneous data collection for both land and water purposes can be achieved using sensors that collect TIR data in two separate channels, each channel using a gain setting most appropriate for land or water. The detection of archaeological structures and natural water seeps would also be improved by collection of data after sunset, which would require a separate data acquisition from that providing surface water temperature data and therefore additional cost. At this point, the cost for acquiring TIR data is quite high ($620/river-km) compared to the potential benefits of the data, unless reflected-wavelength data are also collected that can satisfy other GCMRC protocol requirements (such as mapping riparian vegetation). This is especially true if multiple data acquisitions are required during the year for temporal analyses of backwater areas. The cost for these data cannot be totally mitigated by its ability to partly replace the need for ground surveys of backwaters because calibration of the TIR data will require some ground-truth data from warm backwater areas (in addition to low-temperature main-stem data). However, the airborne data can provide a product that cannot be approached by ground surveys, that being an instantaneous (2 hour) map of surface water temperature over a 160-km stretch of the Grand Canyon.

Arizona↗

USGS2004

Characterization of aquifer heterogeneity using cyclostratigraphy and geophysical methods in the upper part of the Karstic Biscayne Aquifer, Southeastern Florida

This report identifies and characterizes candidate ground-water flow zones in the upper part of the shallow, eogenetic karst limestone of the Biscayne aquifer in the Lake Belt area of north-central Miami-Dade County using cyclostratigraphy, ground-penetrating radar (GPR), borehole geophysical logs, and continuously drilled cores. About 60 miles of GPR profiles were used to calculate depths to shallow geologic contacts and hydrogeologic units, image karst features, and produce qualitative views of the porosity distribution. Descriptions of the lithology, rock fabrics, and cyclostratigraphy, and interpretation of depositional environments of 50 test coreholes were linked to the geophysical interpretations to provide an accurate hydrogeologic framework. Molluscan and benthic foraminiferal paleontologic constraints guided interpretation of depositional environments represented by rockfabric facies. Digital borehole images were used to characterize and quantify large-scale vuggy porosity. Preliminary heat-pulse flowmeter data were coupled with the digital borehole image data to identify candidate ground-water flow zones. Combined results show that the porosity and permeability of the karst limestone of the Biscayne aquifer have a highly heterogeneous and anisotropic distribution that is mostly related to secondary porosity overprinting vertical stacking of rock-fabric facies within high-frequency cycles (HFCs). This distribution of porosity produces a dual-porosity system consisting of diffuse-carbonate and conduit flow zones. The nonuniform ground-water flow in the upper part of the Biscayne aquifer is mostly localized through secondary permeability, the result of solution-enlarged carbonate grains, depositional textures, bedding planes, cracks, root molds, and paleokarst surfaces. Many of the resulting pore types are classified as touching vugs. GPR, borehole geophysical logs, and whole-core analyses show that there is an empirical relation between formation porosity, permeability, formation electrical conductivity, and GPR reflection amplitudes? as porosity and permeability increase, formation electrical conductivity increases and reflection amplitude decreases. This relation was observed throughout the entire vertical and lateral section of the upper part of the Biscayne aquifer in the study area. Further, upward-shallowing brackish- or freshwatercapped cycles of the upper part of the Fort Thompson Formation show low-amplitude reflections near their base that correspond to relatively higher porosity and permeability. This distribution is related to a systematic vertical stacking of rock-fabric facies within the cycle. Inferred flow characteristics of the porosity distribution within the upper part of the Biscayne aquifer were used to identify four ground-water flow classes, with each characterized by a discrete pore system that affects vertical and horizontal groundwater flow: (1) a low-permeability peat, muck, and marl ground-water flow class; (2) a horizontal conduit ground-water flow class; (3) a leaky, low-permeability ground-water flow class; and (4) a diffuse-carbonate ground-water flow class. At the top of the Biscayne aquifer, peat, muck, and marl can combine to form a relatively low-permeability layer of Holocene sediment that water moves through slowly. Most horizontal conduit flow is inferred to occur along touching vugs in portions of the following rock-fabric facies: (1) touchingvug pelecypod floatstone and rudstone, (2) sandy touching-vug pelecypod floatstone and rudstone, (3) vuggy wackestone and packstone, (4) laminated peloid grainstone and packstone, (5) peloid grainstone and packstone, and (6) peloid wackestone and packstone. Gastropod floatstone and rudstone, mudstone and wackestone, and pedogenic limestone rock-fabric facies are the main hosts for leaky, low-permeability units.

Florida↗

USGS2023

The Sukari gold deposit, Egypt: Geochemical and geochronological constraints on the ore genesis and implications for regional exploration

The Sukari gold deposit (>15 Moz Au) in the Eastern Desert of Egypt is hosted by a deformed granitoid stock (Sukari tonalite-trondhjemite intrusion) and mainly occurs as a network of crosscutting sulfide-bearing quartz (± carbonate) veins and intensely sulfidized-silicified-sericitized wall rock. Emplacement of the Sukari intrusion into a tectonized Neoproterozoic accretionary complex was controlled by a system of NE- to NNE-trending oblique faults that are related to a deep-seated positive flower structure. A robust genetic model has been hampered by the poorly understood relationships between gold mineralization and host rocks. In this study, zircon U-Pb ages of three samples from the Sukari intrusion define a crystallization age of ~695 ± 2 Ma. In contrast, hydrothermal sericite from the ore zone yields an 40 Ar/ 39 Ar age of ~625 ± 3 Ma, which coincides with the onset of major sinistral transpression in the region. Features including sigmoidal morphology of gold quartz veins and abundant subhorizontal tension gashes alongside widespread brecciation and recrystallization suggest that quartz veining occurred during renewed shortening and exhumation through the brittle-ductile transition. Petrographic and micro-X-ray fluorescence (µXRF) studies indicate that disseminated gold and sulfides, commonly associated with sericite and carbonate alteration, are mostly confined to stylolitic bands in the quartz veins. Oscillatory and sector zoning patterns, irregular As-rich bands, and truncations between early- and late-genetic pyrites reflect variations in temperature and mechanism of ore deposition, demonstrated by variable As/S and Co/Ni ratios in the different pyrite generations. Laser ablation-inductively coupled plasma-mass spectrometry analysis pinpoints the covariance of gold and arsenic contents in pyrite, but free milling gold inclusions in microfractures consistently have a mercury-bearing electrum composition, depicting different ore formation stages. Ore fluids with δ 34 S H 2 s "> S H 2 s values of –1.9 to –3.0‰, modeled from gold-associated pyrite and arsenopyrite assemblages with nearly identical δ 34 S values, suggest a likely single source of sulfur. Alternatively, multisourced sulfur could have extensively mixed and equilibrated by fluid reaction with carbonaceous wall rock. Gold deposition was triggered by abrupt changes in fluid pH and ƒ f O 2 "> O 2 ⁠ . As an implication for future exploration, sites of maximized strain gradients adjacent to granitoid bodies along extensive transpression zones in the district could be highly prospective targets, particularly where imprinted by sericite-carbonate ± graphite alteration.

Sukari gold deposit↗

USGS2025

Origin and evolution of mafic volcanism associated with 3 m.y. of andesite production at the Goat Rocks volcanic cluster, southern Washington Cascade Range

More than 3 m.y. of mafic volcanism near the Goat Rocks volcanic cluster in the southern Washington Cascade Range, USA, lends insight into the evolution of basalts and the subarc mantle at a long-lived, major arc volcanic locus. We contribute field observations, 40 Ar/ 39 Ar dates, paleomagnetic directions, and bulk rock and mineral compositions to characterize nine mafic units that erupted in association with the Goat Rocks volcanic cluster. The time frame of mafic volcanism, ca. 3.6 Ma to 60 ka, encompasses the lifespan of the central volcanic cluster (3.1 Ma to 115 ka), with a lull from ca. 2.7 Ma to 1.4 Ma. A climactic period of voluminous mafic activity and far-traveled lava flows, including construction of the Hogback Mountain shield volcano, coincided with voluminous andesite eruptions from the central volcanic cluster. The basaltic rocks in the Goat Rocks area are calc-alkaline to barely tholeiitic and have high field strength element depletion relative to large-ion lithophile elements characteristic of calc-alkaline basalts (CAB) of the Cascade volcanic arc. Unlike at neighboring andesitic volcanic centers (Mounts Adams, St. Helens, and Rainier), no other mafic end members such as high-aluminum olivine tholeiite (HAOT) or intraplate-type basalt (IPB) are present at or near the Goat Rocks volcanic cluster, although some of the calc-alkaline basalts in this study have IPB-like affinities. The Goat Rocks mafic units exhibit two main temporal trends in composition: (1) the most primitive basalts erupted earlier, compared to less primitive and more evolved compositions later, and (2) high field strength element concentrations are higher in the younger basalt units relative to the oldest two. In contrast to these temporal trends, the mafic units define two compositional groups that recur through time, a low-Sr and a high-Sr group, each with distinct trace element and Sr and Nd isotope ratios. Although radiogenic isotope ratios are generally aligned with High Cascades CAB and HAOT, some extend toward IPB of Mount Adams and Simcoe Mountains volcanic field. Olivine-dominated crystal fractionation at shallow pressure from a small range of parent magma compositions accounts for much of the variation among the basalts and basaltic andesites. A high-pressure fractionation model is plausible for only one of the youngest basalt units (basalt of Walupt Lake volcano). Mafic recharge and crustal assimilation accounts for the incompatible-element enriched composition of basaltic andesites erupted during construction of the largest andesitic centers, further supporting sustained basalt mass flux and thermal energy driving andesite genesis. We model the most primitive members of the Goat Rocks mafic units as partial melts of successively less depleted mantle in time. Variable degrees of fluxing with fluids and melts from subduction explain the distinction between high-Sr and low-Sr groups. We propose that mantle metasomatism by ancestral subduction and fluid-flux melting is heterogeneously distributed through the local subarc mantle and played a greater role in the genesis of the high-Sr basalt group. The limited range of primitive basalt types around the Goat Rocks volcanic cluster contrasts with the much greater diversity of basalts throughout the southern Washington to northern Oregon Cascade arc. On the other hand, the central volcanic cluster encompasses nearly the entire diversity observed at neighboring composite volcanoes. In the case of the Goat Rocks area at least, and perhaps attributable to the entire region, this means that the genesis of diverse intermediate magmas is independent from and does not require vastly different parental basalt compositions.

California, Oregon, Washington↗

USGS1969

Experimental studies of pegmatite genesis: I. A model for the derivation and crystallization of granitic pegmatites

The genesis of granitic igneous pegmatites is here considered in terms of a model conceived from results of field and laboratory studies and subsequently tested by means of experimental investigations. This model emphasizes the roles of water (and/or other relatively volatile substances), both as a dissolved constituent in granitic magmas and as the dominant constituent of a separate fluid phase that is in the supercritical state under most conditions of pegmatite formation. Pegmatite magma, as distinguished by a content of dissolved water that is high relative to the limit of solubility under existing confining pressure, can be formed either through partial melting of crustal materials or as rest-liquid in a cooling igneous body yielding dominantly anhydrous crystalline phases. Such granitic magma can be expected to consolidate according to the following three-fold sequence: 1. Crystallization from hydrous silicate melt, yielding anhydrous solid phases with or without OH-bearing phases. The product is characterized by normal phaneritic textures that generafly are coarse grained. It has been termed pegmatite in some occurrences, and granite in others. 2. Crystallization concomitantly from silicate melt and from a coexisting exsolved aqueous fluid of considerably lower viscosity, yielding giant-textured pegmatite along with much finer-grained, even aplitic, mineral aggregates. Segregation of these products can vary enormously in scale and degree. Partitioning of constituents between melt and aqueous fluid, rapid diffusion of constituents through the aqueous phase, and gravitational rising of this fluid through the system contribute to formation of pods, zones, and other rock units of unusual composition and texture. 3. Crystallization in the absence of silicate melt, yielding a wide variety of late-stage products. These include so-called "pocket minerals" and numerous mineral aggregates formed through exchanges of material among aqueous fluid and earlier-formed crystal-line phases. Development of pegmatite bodies can begin with either Step 1 or Step 2, but it is suggested that the processes involved in Step 2 are essential to the formation of all true pegmatites of igneous origin. The appearance of a second fluid phase, in general a supercritical aqueous fluid derived from the crystallizing melt, is regarded as the decisive event; it is promptly followed by fundamental changes in distribution and texture of the solid phases being formed. The processes can operate effectively in a fully closed system, and they also can modify the surrounding rocks if the system is open at any stage. Step 1 can include reactions between magma and earlier-formed crystals, but far more rapid and extensive exchanges of materials are subsequently effected by processes included in Steps 2 and 3; indeed, such exchanges also can account satisfactorily for pegmatites of metamorphic origin. Crystallization of most granitic magmas in the absence of a separate aqueous phase probably would begin within the temperature range 1,300°-650 ° C, the specific liquidus temperature depending mainly upon the amounts of volatile constituents held in solution at the time. This compositional factor also would be important in controlling the stage of crystallization-late, intermediate, or early-at which a separate aqueous fluid would make its appearance. Depending upon confining pressure as dictated by geologic conditions for a given system, the stage in crystallization represented by the presence of both silicate melt and aqueous fluid could begin within about the same temperature range of 1.300°-650 ° C. Exhaustion of the melt could occur within range extending downward to temperatures of 600C or even somewhat lower. Textural and structural features appear to be the most reliable indicators of the stages and fundamental processes involved in crystallization of both natural and synthetic pegmatites. The contrasting processes of crystallization from one fluid and from more than one fluid can operate over such broad P-T-X ranges that simple genetic pegmatite classifications based largely upon "key minerals," presumed temperature or pressure intervals, or the presence or absence of supercritical conditions appear to be somewhat unrealistic. © 1969 Society of Economic Geologists, Inc.

Economic Geology↗

USGS1973

Fluid-inclusion studies of the fluorspar and gold deposits, Jamestown district, Colorado

The Jamestown district, Boulder County, Colorado, is a major producer of fluorspar; prior to 1940, gold, gold-telluride, and lead-silver ores were mined. Fluorite occurs as a primary mineral in phases of the composite sodic granite stock at Jamestown and in breccia zones, stockworks, and pipe-shaped bodies in and adjacent to the stock. Gold and telluride mineralization occurs with and without fluorite in veins peripheral to the stock. A great variety of fluid-inclusion types is present in the district, reflecting chemically and physically diverse fluids. Fluid inclusions in early-stage quartz from the fluorspar deposits have filling temperatures of 250 degrees to 375 degrees C, salinities of 20 to 30%, and boiling is indicated at many locations. Most inclusions associated with the main fluorite stage have salinities of at least 26% to more than 50% and filling temperatures in the range of 250 degrees to 350 degrees C. Probable cognate fluorite on the inclusion walls and as many as ten daughter minerals precipitated from some primary inclusions in fluorite attest to the presence of salt and CaF 2 -rich polycomponent fluorspar-depositing fluids. Carbon dioxide-rich liquids and vapors were present during and after the main period of fluorspar deposition. Gold-bearing veins contain fluid inclusions indicating that two fundamentally different types of fluids were present. Inclusions in pregold quartz and fluorite have filling temperatures which range up to 375 degrees C, and most have very high salinities comparable to those from the fluorspar deposits, suggesting that early quartz and fluorite of the gold-bearing veins was roughly contemporaneous with the main period of fluorspar deposition. Fluid inclusion and other thermometric data (Kelly and Goddard, 1969) suggest that gold and telluride deposition occurred at temperatures below 300 degrees C. Fluid inclusions most directly associated with gold deposition have filling temperatures in the range 205 degrees to 270 degrees C and have about 4% salinity. These data suggest that the gold-bearing fluids either evolved from the fluorite-bearing fluids or were later unrelated hydrothermal pulses introduced on reopened structures. Boiling occurred at many locations that were at relatively high elevations or adjacent to the sodic granite stock. From the interpretation that boiling occurred and from the heterogeneity of CO 2 contents, we deduce that fluid pressures were low and variable, commonly near 150 bars, but ranging to as much as approximately 500 bars when CO 2 pressures were high; these determinations are compatible with the depth of cover estimated from geomorphic reconstruction using the Flattop peneplain. The absence of strong thermal or salinity zonation of fluids relative to the outcropping stock suggests that fluids were emanating from a larger intrusive body at depth.

Colorado↗