Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Processes”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59Linked to original sources
USGS2012

Ancient impact and aqueous processes at Endeavour Crater, Mars

The rover Opportunity has investigated the rim of Endeavour Crater, a large ancient impact crater on Mars. Basaltic breccias produced by the impact form the rim deposits, with stratigraphy similar to that observed at similar-sized craters on Earth. Highly localized zinc enrichments in some breccia materials suggest hydrothermal alteration of rim deposits. Gypsum-rich veins cut sedimentary rocks adjacent to the crater rim. The gypsum was precipitated from low-temperature aqueous fluids flowing upward from the ancient materials of the rim, leading temporarily to potentially habitable conditions and providing some of the waters involved in formation of the ubiquitous sulfate-rich sandstones of the Meridiani region.

Science↗
USGS1963

Radiogenic strontium-87 as an index of geologic processes

The abundance of radiogenic Sr 87 relative to Sr 86 at the time of crystallization has been determined for 45 rocks. The total range in the ratio Sr 87 /Sr 86 is less than 2 percent. Ratios for recent lavas range from 0.702 to 0.711. Oceanic basalts are closely grouped at 0.703, whereas ratios for continental volcanic rocks spread from 0.702 to 0.711. Among the volcanic rocks, ranging from basalt to rhyolite, no correlation was found between original ratio and rock type. Older mafic and felsic rocks that include both plutonic and extrusive types also cover this same range in original Sr 87 /Sr 86 ratios; however, there is a definite trend with geologic time. Precambrian rocks give values as low as 0.700. The data indicate that Sr 87 /Sr 86 of the weathering crust has changed 1.1 percent in 3000 million years, while the ratio in the mantle has changed no more than 0.5 percent.

Science↗
USGS1994

Volcanic mixed avalanches: A distinct eruption-triggered mass-flow process at snow-clad volcanoes

A generally unrecognized type of pyroclastic deposit was produced by rapid avalanches of intimately mixed snow and hot pyroclastic debris during eruptions at Mount St. Helens, Nevado del Ruiz, and Redoubt Volcano between 1982 and 1989. These "mixed avalanches" traveled as far as 14 km at velocities up to ∼27 m/s, involved as much as 10 7 m 3 of rock and ice, and left unmelted deposits of single flow units as thick as 5 m. During flow downslope, heat transfer from hot rocks to snow produced meltwater that partially saturated the mixtures, apparently giving these mixed avalanches mobilities equal to or greater than those of "dry" debris avalanches of similar volume. The avalanches studied for this report began as snow avalanches, triggered during explosive phases of the eruptions by ballistic bombardment of snow slopes by hot pyroclastic debris. Erosion by the avalanches incorporated additional snow, fragments of glacier ice, and other rock debris. Mixed-avalanche deposits were massive, very poorly sorted, and ungraded to inversely graded prior to melting. Although rock debris composed as much as 70 wt% of the frozen samples, the bulk volumetric content of rock debris was only 9% to 36%. Snow and ice composed between 36% and 72% of the frozen samples, with void space making up the remainder of the volume. Deformation and consolidation after melting of the ice content reduced the deposits to loose, porous layers that were only a fraction of their original thickness and that later gave little hint of their origin. After melting and desiccation, the deposits are highly susceptible to erosion and unlikely to be well preserved in the stratigraphic record.

Alaska, Washington↗
USGS2009

Comparison of clast frequency and size in the resurge deposits at the Chesapeake Bay impact structure (Eyreville A and Langley cores): Clues to the resurge process

Collapse and inward slumping of unconsolidated sedimentary strata expanded the Chesapeake Bay impact structure far beyond its central basement crater. During crater collapse, sediment-loaded water surged back to fill the crater. Here, we analyze clast frequency and granulometry of these resurge deposits in one core hole from the outermost part of the collapsed zone (i.e., Langley) as well as a core hole from the moat of the basement crater (i.e., Eyreville A). Comparisons of clast provenance and flow dynamics show that at both locations, there is a clear change in clast frequency and size between a lower unit, which we interpret to be dominated by slumped material, and an upper, water-transported unit, i.e., resurge deposit. The contribution of material to the resurge deposit was primarily controlled by stripping and erosion. This includes entrainment of fallback ejecta and sediments eroded from the surrounding seafloor, found to be dominant at Langley, and slumped material that covered the annular trough and basement crater, found to be dominant at Eyreville. Eyreville shows a higher content of crystalline clasts than Langley. There is equivocal evidence for an anti-resurge from a collapsing central water plume or, alternatively, a second resurge pulse, as well as a transition into oscillating resurge. The resurge material shows more of a debris-flow-like transport compared to resurge deposits at some other marine target craters, where the ratio of sediment to water has been relatively low. This result is likely a consequence of the combination of easily disaggregated host sediments and a relatively shallow target water depth.

Chesapeake Bay↗
USGS2010

Integration of tectonic, sedimentary, and geohydrologic processes leading to a small-scale extension model for the Mormon Mountains area north of Lake Mead, Lincoln County, Nevada

Scattered remnants of highly diverse stratigraphic sections of Tertiary lacustrine limestone, andesite flows, and 23.8–18.2 Ma regional ash-flow tuffs on the north flank of the Mormon Mountains record previously unrecognized deformation, which we interpret as pre–17 Ma uplift and possibly weak extension on the north flank of a growing dome. Directly to the north of the Mormon dome, 17–14 Ma ash-flow tuffs and rhyolite are interstratified with landslides, debris avalanches, debris flows, and alluvial-fan deposits that accumulated to a thickness of more than 2 km in an extension-parallel basin. The source for the landslides and debris avalanche deposits is unknown, but it was probably an adjacent scarp along a transverse fault bounding an early part of the Mormon dome. An average 45° of easterly tilt of the entire Tertiary basin-fill succession represents the major post–14 Ma deformation event in the region. We question the basis for the published estimate of 22 km of westerly displacement on the Mormon Peak detachment fault and, on the basis of landslides in the upper plate having a probable source in the adjacent Mormon dome, constrain the heave to ~4 km. We interpret the dome and basin as coupled strains similar to others in the region and suggest that these strains reflect a waveform pattern of extension-normal lateral midcrustal ductile flow. Previously, doming was interpreted as an isostatic response to tectonic unloading by large-displacement detachment faults or as pseudo-structural highs stranded by removal of middle crust from adjacent areas. Moreover, we argue that the strong thinning of upper-plate rock successions throughout the Mormon Mountains and Tule Springs Hills resulted from a loss of rock volume by protracted fluid flow, dissolution, and collapse, seriously limiting the usefulness of upper-plate strain in evaluating extension magnitude. We present a geohydrologic model that couples uplift driven by ductile inflow with dissolution driven by fluid infiltration, possibly augmented by mantle-derived CO 2 -rich fluids. Karsting in the uplands led to carbonate sedimentation in adjacent lowlands. Whether or not our downward revision of extension in the Mormon Mountains is valid, extension at that latitude is isolated from extension in the Lake Mead area by a low-strain corridor between the two areas. Recognition of the isolated and potentially diminished strain impacts estimates of maximum finite elongation of the Basin and Range Province because one of three vector paths used in those estimates passes through the Mormon Mountains.

Nevada↗
USGS2005

Field measurements of incision rates following bedrock exposure: Implications for process controls on the long profiles of valleys cut by rivers and debris flows

Until recently, published rates of incision of bedrock valleys came from indirect dating of incised surfaces. A small but growing literature based on direct measurement reports short-term bedrock lowering at geologically unsustainable rates. We report observations of bedrock lowering from erosion pins monitored over 1–7 yr in 10 valleys that cut indurated volcanic and sedimentary rocks in Washington, Oregon, California, and Taiwan. Most of these channels have historically been stripped of sediment. Their bedrock is exposed to bed-load abrasion, plucking, and seasonal wetting and drying that comminutes hard, intact rock into plates or equant fragments that are removed by higher flows. Consequent incision rates are proportional to the square of rock tensile strength, in agreement with experimental results of others. Measured rates up to centimeters per year far exceed regional long-term erosion-rate estimates, even for apparently minor sediment-transport rates. Cultural artifacts on adjoining strath terraces in Washington and Taiwan indicate at least several decades of lowering at these extreme rates. Lacking sediment cover, lithologies at these sites lower at rates that far exceed long-term rock-uplift rates. This rate disparity makes it unlikely that the long profiles of these rivers are directly adjusted to either bedrock hardness or rock-uplift rate in the manner predicted by the stream power law, despite the observation that their profiles are well fit by power-law plots of drainage area vs. slope. We hypothesize that the threshold of motion of a thin sediment mantle, rather than bedrock hardness or rock-uplift rate, controls channel slope in weak bedrock lithologies with tensile strengths below ∼3–5 MPa. To illustrate this hypothesis and to provide an alternative interpretation for power-law plots of area vs. slope, we combine Shields' threshold transport concept with measured hydraulic relationships and downstream fining rates. In contrast to fluvial reaches, none of the hundreds of erosion pins we installed in steep valleys recently scoured to bedrock by debris flows indicate any postevent fluvial lowering. These results are consistent with episodic debris flows as the primary agent of bedrock lowering in the steepest parts of the channel network above ∼0.03–0.10 slope.

California, Washington, Oregon↗
USGS2014

Processes of arroyo filling in northern New Mexico, USA

We documented arroyo evolution at the tree, trench, and arroyo scales along the lower Rio Puerco and Chaco Wash in northern New Mexico, USA. We excavated 29 buried living woody plants and used burial signatures in their annual rings to date stratigraphy in four trenches across the arroyos. Then, we reconstructed the history of arroyo evolution by combining trench data with arroyo-scale information from aerial imagery, light detection and ranging (LiDAR), longitudinal profiles, and repeat surveys of cross sections. Burial signatures in annual rings of salt cedar and willow dated sedimentary beds greater than 30 cm thick with annual precision. Along both arroyos, incision occurred until the 1930s in association with extreme high flows, and subsequent filling involved vegetation development, channel narrowing, increased sinuosity, and finally vertical aggradation. A strongly depositional sediment transport regime interacted with floodplain shrubs to produce a characteristic narrow, trapezoidal channel. The 55 km study reach along the Rio Puerco demonstrated upstream progression of arroyo widening and filling, but not of arroyo incision, channel narrowing, or floodplain vegetation development. We conclude that the occurrence of upstream progression within large basins like the Rio Puerco makes precise synchrony across basins impossible. Arroyo wall retreat is now mostly limited to locations where meanders impinge on the arroyo wall, forming hairpin bends, for which entry to and exit from the wall are stationary. Average annual sediment storage within the Rio Puerco study reach between 1955 and 2005 was 4.8 × 10 5 t/yr, 16% of the average annual suspended sediment yield, and 24% of the long-term bedrock denudation rate. At this rate, the arroyo would fill in 310 yr.

New Mexico↗
USGS2016

Water-magma interaction and plume processes in the 2008 Okmok eruption, Alaska

Eruptions of similar explosivity can have divergent effects on the surroundings due to differences in the behavior of the tephra in the eruption column and atmosphere. Okmok volcano, located on Umnak Island in the eastern Aleutian Islands, erupted explosively between 12 July and 19 August 2008. The basaltic andesitic eruption ejected ∼0.24 km 3 dense rock equivalent (DRE) of tephra, primarily directed to the northeast of the vent area. The first 4 h of the eruption produced dominantly coarse-grained tephra, but the following 5 wk of the eruption deposited almost exclusively ash, much of it very fine and deposited as ash pellets and ashy rain and mist. Meteorological storms combined with abundant plume water to efficiently scrub ash from the eruption column, with a rapid decrease in deposit thickness with distance from the vent. Grain-size analysis shows that the modes (although not their relative proportions) are very constant throughout the deposit, implying that the fragmentation mechanisms did not vary much. Grain-shape features consistent with molten fuel-coolant interaction are common. Surface and groundwater drainage into the vents provided the water for phreatomagmatic fragmentation. The available water (water that could reach the vent area during the eruption) was ∼2.8 × 10 10 kg, and the erupted magma totaled ∼7 × 10 11 kg, which yield an overall water:magma mass ratio of ∼0.04, but much of the water was not interactive. Although magma flux dropped from 1 × 10 7 kg/s during the initial 4 h to 1.8 × 10 5 kg/s for the remainder of the eruption, most of the erupted material was ejected during the lower-mass-flux period due to its much greater length, and this tephra was dominantly deposited within 10 km downwind of the vent. This highlights the importance of ash scrubbing in the evaluation of hazards from explosive eruptions.

Alaska↗
USGS2011

Landscape evolution in south-central Minnesota and the role of geomorphic history on modern erosional processes

The Minnesota River Valley was carved during catastrophic drainage of glacial Lake Agassiz at the end of the late Pleistocene. The ensuing base-level drop on tributaries created knickpoints that excavated deep valleys as they migrated upstream. A sediment budget compiled in one of these tributaries, the Le Sueur River, shows that these deep valleys are now the primary source of sediment to the Minnesota River. To compare modern sediment loads with pre-European settlement erosion rates, we analyzed incision history using fluvial terrace ages to constrain a valley incision model. Results indicate that even thoughthe dominant sediment sources are derived from natural sources (bluffs, ravines, and streambanks), erosion rates have increased substantially, due in part to pervasive changes in watershed hydrology.

Conference Paper↗
USGS2006

Sedimentary textures formed by aqueous processes, Erebus crater Meridiani Planum, Mars

New observations at Erebus crater (Olympia outcrop) by the Mars Exploration Rover Opportunity between sols 671 and 735 (a sol is a martian day) indicate that a diverse suite of primary and penecontemporaneous sedimentary structures is preserved in sulfate-rich bedrock. Centimeter-scale trough (festoon) cross-lamination is abundant, and is better expressed and thicker than previously described examples. Postdepositional shrinkage cracks in the same outcrop are interpreted to have formed in response to desiccation. Considered collectively, this suite of sedimentary structures provides strong support for the involvement of liquid water during accumulation of sedimentary rocks at Meridiani Planum.

Geology↗
USGS2022

Next-generation lampricides: A three-stage process to develop improved control tools for invasive sea lamprey

Successful integrated management of the invasive predatory sea lamprey ( Petromyzon marinus ) in the Laurentian Great Lakes of North America is owed largely to the long history of beneficial use of two lampricides: 3-trifluoromethyl-4-nitrophenol (TFM) and 2′,5-dichloro-4′-nitrosalicylanilide (niclosamide). Ensuring continued successful sea lamprey control necessitates consideration of possible next-generation lampricides to supplement or replace current lampricides. This review identifies fifteen hallmarks of success for current lampricides to be used as design criteria in a search for next-generation lampricides. A three-stage research approach is outlined. Targeted research using omics, computer modelling, and high-throughput technology to define molecular mechanisms and high probability molecular targets for sea lamprey selective toxic action is crucial to prioritizing chemical candidates. Targeted delivery or identifying synergists to existing or new lampricides can provide increased efficiency and reduced environmental impact. Ultimate development of next-generation lampricides will rely on traditional toxicity testing methodologies to ensure safety and regulatory compliance.

Canadian Journal of Fisheries and Aquatic Sciences↗
USGS2023

Linking ecosystem processes to consumer growth rates: Gross primary productivity as a driver of freshwater fish somatic growth in a resource-limited river

Individual growth can exert strong controls on population dynamics and be constrained by resource acquisition rates. Difficulty in accurately quantifying resource availability over large spatial extents and at high temporal frequency often limits attempts to understand the extent that resources limit individual growth. Daily estimates of stream metabolism, including gross primary productivity (GPP), are increasingly available but have not, to our knowledge, been linked to fish growth. Here we examine how GPP, water temperature, high flow and turbidity are linked to spatiotemporal variation in growth of flannelmouth sucker (Catostomus latipinnis). We fit state space growth models to six years of mark-recapture data collected in four river reaches spanning 300 river kilometers. Consistent with past research in this system, we find that water temperature is the dominant driver of spatiotemporal variation in growth. However, we also find that GPP is strongly linked to fish growth. Fish growth is likely to be linked to stream metabolism in other systems where overall productivity, not the quality of primary producers, limits the food webs that support fish growth.

Arizona↗
USGS2013

Potential climate change impacts on temperate forest ecosystem processes

Large changes in atmospheric CO2, temperature and precipitation are predicted by 2100, yet the long-term consequences for carbon, water, and nitrogen cycling in forests are poorly understood. We applied the PnET-CN ecosystem model to compare the long-term effects of changing climate and atmospheric CO2 on productivity, evapotranspiration, runoff, and net nitrogen mineralization in current Great Lakes forest types. We used two statistically downscaled climate projections, PCM B1 (warmer and wetter) and GFDL A1FI (hotter and drier), to represent two potential future climate and atmospheric CO2 scenarios. To separate the effects of climate and CO2, we ran PnET-CN including and excluding the CO2 routine. Our results suggest that, with rising CO2 and without changes in forest type, average regional productivity could increase from 67% to 142%, changes in evapotranspiration could range from –3% to +6%, runoff could increase from 2% to 22%, and net N mineralization could increase 10% to 12%. Ecosystem responses varied geographically and by forest type. Increased productivity was almost entirely driven by CO2 fertilization effects, rather than by temperature or precipitation (model runs holding CO2 constant showed stable or declining productivity). The relative importance of edaphic and climatic spatial drivers of productivity varied over time, suggesting that productivity in Great Lakes forests may switch from being temperature to water limited by the end of the century.

Michigan;Minnesota;Wisconsin↗
USGS2025

Geochemical processes related to mined, milled, or natural metal deposits in a rapidly changing global environment

The demand for metals and raw materials, such as nickel and copper, has been projected to expand in the coming decades, driven by the global energy transition, the need for green technologies, and expanding infrastructure. Consequently, the increasing extraction and production of mining waste can have adverse impacts on surrounding environments and human health. The aim of this thematic collection is to fill critical knowledge gaps in the present-day cycles of metal(loid)s from source to larger sinks, and the effect of environmental management, anthropogenic development, and climate change. Altogether, the studies have been conducted in different natural settings around the world and comprise investigations in laterites, a soil-medicinal plant system, watersheds, and banded iron formations, among others. The geochemical applications in tracing mineralization, its secondary products, and/or potential impact on the immediate environment are highly diverse with applied tools ranging from isotope tracers to major and trace element systematics. Particularly the use of rare earth elements, their patterns and anomalies are methods employed by several studies in this collection. We summarize the findings to offer a potential future direction for the use of geochemical tracing techniques in resource exploration in the context of climate change and environmental challenges.

Geochemistry: Exploration, Environment, Analysis↗
USGS2018

Slope failure and mass transport processes along the Queen Charlotte Fault Zone, western British Columbia

Multibeam echosounder (MBES) images, 3.5 kHz seismic-reflection profiles and piston cores obtained along the southern Queen Charlotte Fault Zone are used to map and date mass-wasting events at this transform margin – a seismically active boundary that separates the Pacific Plate from the North American Plate. Whereas the upper continental slope adjacent to and east (upslope) of the fault zone offshore of the Haida Gwaii is heavily gullied, few large-sized submarine landslides in this area are observed in the MBES images. However, smaller submarine seafloor slides exist locally in areas where fluid flow appears to be occurring and large seafloor slides have recently been detected at the base of the steep continental slope just above its contact with the abyssal plain on the Queen Charlotte Terrace. In addition, along the subtle slope re-entrant area offshore of the Dixon Entrance shelf bathymetric data suggest that extensive mass wasting has occurred in the vicinity of an active mud volcano venting gas. We surmise that the relative lack of submarine slides along the upper slope in close proximity to the Queen Charlotte Fault Zone may be the result of seismic strengthening (compaction and cohesion) of a sediment-starved shelf and slope through multiple seismic events.

British Columbia↗