SEARCH · Geology Reports

Results for “Nature Scientific Data”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59Linked to original sources

USGS2024

Hydrogeologic conceptual model of groundwater occurrence and brine discharge to the Dolores River in the Paradox Valley, Montrose County, Colorado

Salinity, or total dissolved solids (TDS), of the Colorado River is a major concern in the southwestern United States where the river provides water to about 40 million people for municipal and industrial use and is used to irrigate about 5.5 million acres of land. Much of the salinity in the Colorado River Basin is derived from natural interactions of surface water and groundwater with various geologic materials (rocks, soils, and alluvial deposits). The Dolores River in southwest Colorado is a major tributary of the Colorado River that historically accounts for about 6 percent of the salinity load to the Upper Colorado River Basin with the Paradox Valley being the primary source of salinity to the Dolores River. The Paradox Valley, one of several salt-anticline valleys in the region, is a fault-bounded topographic basin aligned with and exposing an underlying salt-anticline core. Salt deposits in the Pennsylvanian Paradox Formation of the Hermosa Group form an elongated salt diapir oriented northwest to southeast that is up to 12,000 feet (ft) thick beneath the present valley floor. Surface erosion, groundwater circulation, and weathering during Tertiary and Quaternary valley formation contributed to development of a cap rock, collapse features, breccia, and brine at the top of the exposed salt diapir. Today (2023), brine occurring in the brecciated cap rock and underlying salt deposits is in hydraulic connection with an overlying freshwater alluvial aquifer, and depending on seasonal river stage and hydrologic conditions, the brine discharges to the Dolores River causing the observed increase in salinity as the river crosses the Paradox Valley. To reduce salinity concentrations in the Dolores River, the Bureau of Reclamation (Reclamation) operates the Paradox Valley Unit (PVU). The PVU project consists of nine shallow brine pumping wells near the Dolores River and one deep disposal well where the brine is injected for disposal. When operational, the PVU pumping wells extract brine from the base of the alluvial aquifer that is piped and injected into a deep disposal well about 3 miles southwest of the PVU. The PVU became fully operational July 1, 1996, and by 2015, operation of the PVU had reduced salinity concentrations in the Dolores River by as much as 70 percent compared to pre-PVU conditions. In response to a 4.5 magnitude earthquake, injection operations, and thus PVU pumping, were ceased from March 2019 to June 2022. A trial period of PVU operation began in June 2022 with a reduced injection rate, and thus PVU pumping rate, of about two-thirds capacity to gather additional information and guide future operational decisions. In cooperation with Reclamation, the U.S. Geological Survey (USGS) developed this report to present the current (2023) understanding of groundwater and brine occurrence and discharge to the Dolores River in the Paradox Valley. Results from the compilation of spatial datasets, groundwater sampling and age dating, and aquifer tests are presented to provide improved understanding of the Paradox Valley hydrogeology, to supply datasets for a numerical groundwater-flow and brine-transport model, and to support future operations of the PVU. The hydrogeologic data provided herein, along with the most recent loading analysis for the Dolores River in the Paradox Valley, and a previous conceptual model for brine discharge to the river are used to present a conceptual understanding of groundwater occurrence in the Paradox Valley.

Colorado↗

USGS2010

Hydrologic conditions, stream-water quality, and selected groundwater studies conducted in the Lawrenceville area, Georgia, 2003-2008

Hydrologic studies conducted during 2003-2008 as part of the U.S. Geological Survey Cooperative Water Program with the City of Lawrenceville, Georgia, provide important data for the management of water resources. The Cooperative Water Program includes (1) hydrologic monitoring (precipitation, streamflow, and groundwater levels) to quantify baseline conditions in anticipation of expanded groundwater development, (2) surface-water-quality monitoring to provide an understanding of how stream quality is affected by natural (such as precipitation) and anthropogenic factors (such as impervious area), and (3) geologic studies to better understand groundwater flow and hydrologic processes in a crystalline rock setting. The hydrologic monitoring network includes each of the two watersheds projected for groundwater development?the Redland-Pew Creek and upper Alcovy River watersheds?and the upper Apalachee River watershed, which serves as a background or control watershed because of its similar hydrologic and geologic characteristics to the other two watersheds. In each watershed, precipitation was generally greater during 2003-2005 than during 2006-2008, and correspondingly streamflow and groundwater levels decreased. In the upper Alcovy River and Redland-Pew Creek watersheds, groundwater level declines during 2003-2008 were mostly between 2 and 7 feet, with maximum observed declines of as much as 28.5 feet in the upper Alcovy River watershed, and 49.1 feet in the Redland-Pew Creek watershed. Synoptic base-flow measurements were used to locate and quantify gains or losses to streamflow resulting from groundwater interaction (groundwater seepage). In September 2006, seepage gains were measured at five of nine reaches evaluated in the upper Alcovy River watershed, with losses in the other four. The four losing reaches were near the confluence of the Alcovy River and Cedar Creek where the stream gradient is low and bedrock is at or near the land surface. In the Redland-Pew Creek watershed, groundwater seepage gains were observed at each of the 10 reaches measured during September 2008. Continuous specific conductance, temperature, and turbidity data were collected at gage sites located on Pew and Shoal Creeks, which drain about 32 percent of the city area, and at a background site on the Apalachee River located outside the city boundary. Continuous surface-water monitoring data indicate that reduced precipitation during 2006-2008 resulted in lower turbidity and higher stream temperature and specific conductance than in 2003-2005. In comparison to the other two stream sites, water at the Apalachee River site had the lowest mean and median values for specific conductance, and the greatest mean and median values for turbidity during October 2005-December 2008. In addition to continuous water-quality monitoring, samples were collected periodically to determine fecal-coliform bacteria concentrations. None of the individual samples at the three sites exceeded the Georgia Environmental Protection Division (GaEPD) limit of 4,000 most probable number of colonies per 100 milliliters (MPN col/100 mL) for November through April. In the Redland-Pew Creek and Shoal Creek watersheds, the GaEPD 30-day geometric mean standard of 200 MPN col/100 mL for May-October was exceeded twice during two sampling periods in May-October 2007 and twice during two sampling periods in May-October 2008. Groundwater studies conducted during 2003-2007 include the collection of borehole geophysical logs from four test wells drilled in the upper Alcovy River watershed to provide insight into subsurface geologic characteristics. A flowmeter survey was conducted in a well south of Rhodes Jordan Park to help assess the interconnection of the well with surface water and the effectiveness of a liner-packer assembly installed to eliminate that interconnection. At that same well, hydraulic packer tests were conducted in the open-hole section of the well, and water samp

Georgia↗

USGS2021

Groundwater flow conceptualization of the Pahute Mesa–Oasis Valley Groundwater Basin, Nevada—A synthesis of geologic, hydrologic, hydraulic-property, and tritium data

This report provides a groundwater-flow conceptualization that integrates geologic, hydrologic, hydraulic-property, and radionuclide data in the Pahute Mesa–Oasis Valley (PMOV) groundwater basin, southern Nevada. Groundwater flow in the PMOV basin is of interest because 82 underground nuclear tests were detonated, most near or below the water table. A potentiometric map and nine sets of hydrostratigraphic and hydrologic cross sections supplement the conceptualization. Potentiometric contours indicate that groundwater in the PMOV basin generally flows south-southwest and discharges at Oasis Valley. Groundwater encounters an alternating sequence of low- and high-transmissivity rocks, referred to as dams and pools, respectively, as it moves from east to west across eastern Pahute Mesa. Flow from all Pahute Mesa nuclear tests is to Oasis Valley and is well-constrained by water-level data. Flow converges along a corridor of high transmissivity between Pahute Mesa and Oasis Valley. The location of the lateral PMOV basin boundary is well defined, and this boundary, with a few minor exceptions, represents a no-flow boundary. Some boundary uncertainty exists in the northeastern part of the basin, but potential flow-rate estimates across the northeastern boundary resulting from this uncertainty are small relative to the basin groundwater budget. Recharge in the PMOV basin is derived from episodic pulses of modern water and the diffuse percolation of old water (greater than 1,000 years). Episodic recharge is a minor recharge component observed as a rise in groundwater levels that occurs 3 months to 1 year following a wet winter. Minor amounts of episodic recharge through an unsaturated zone in excess of 1,000 feet (ft) requires preferential flow through faults and fractures. The dominant recharge component is slow, steady, diffuse percolation of old water through the unsaturated zone. A large component of old water recharging the groundwater system is consistent with observations of isotopically light deuterium and oxygen 18 compositions in water from wells on Pahute Mesa and central Oasis Valley. About half the recharge in the PMOV basin is derived from the eastern Pahute Mesa area. The remaining recharge is derived primarily from other highland areas including Timber Mountain, Belted and Kawich Ranges, and Black Mountain. The PMOV groundwater system is nearly steady state, where recharge is balanced by the 5,900 acre-feet per year of natural discharge at Oasis Valley. This assumption is reasonable because the basin is dominated by steady-state conditions, where long-term changes in groundwater storage are minimal. Total groundwater withdrawals from 1963 to 2018 have amounted to less than 10 percent of annual groundwater discharge and less than 0.2 percent of the basin’s groundwater storage. Therefore, present-day (2020) conditions are considered representative of predevelopment (pre-1950) conditions in nearly all areas of the basin. The lower PMOV basin boundary is defined at 4,000 ft below the water table to encompass all underground nuclear tests and tritium plumes. This boundary defines the lower boundary of radionuclide migration. However, nearly all flow and tritium transport occur in the upper 1,600 ft of the saturated zone because a transmissivity-with-depth relation indicates that greater than 90 percent of the transmissivity contributing to groundwater flow occurs within 1,600 ft of the water table. Rocks at deeper depths have low transmissivity because argillic and mineralized alterations plug the fractures. Volcanic rocks form the primary aquifers and confining units in the PMOV basin. Volcanic hydrogeologic units (HGUs) and hydrostratigraphic units (HSUs) have transmissivity distributions that span up to eight orders of magnitude with considerable overlap between distributions. Despite the large overlap between units, mean transmissivities of aquifers are one-to-two orders of magnitude greater than the confining units. However, all volcanic-rock HGUs and HSUs are composite units, meaning that they can function spatially as either an aquifer or confining unit .

Nevada↗

USGS2020

Effects of huisache removal on rangeland evapotranspiration in Victoria County, south-central Texas, 2015–18

The U.S. Geological Survey and Desert Research Institute, in cooperation with the Natural Resources Conservation Service, Texas State Soil and Water Conservation Board, Victoria County Groundwater Conservation District, Victoria Soil and Water Conservation District, and the San Antonio River Authority, evaluated the hydrologic effects of Vachellia farnesiana var. farnesiana (huisache) removal on rangeland evapotranspiration in Victoria County, Texas. Measurements of evapotranspiration, rainfall, and related properties were made at two sites during March 2015 through August 2018. One site was predominantly grassland. The other site was dominated by dense huisache vegetation that was removed about halfway through the study period. The resulting evapotranspiration data were examined for differences between the locations and differences between the pre-removal (2015–16) and post-removal (2017–18) periods to assess the effects of huisache removal on evapotranspiration. Evapotranspiration measurements were made using the eddy-covariance technique and were supplemented by remote-sensing estimates of evapotranspiration derived from thermal and optical satellite images. A map of remotely sensed evapotranspiration was generated for the area surrounding the study sites for 2015 and demonstrates the capability of remote sensing to evaluate land-management effects on evapotranspiration for larger scale areas, such as a county or stream-basin area. During the pre-removal period (March 2015–December 2016), evapotranspiration was greater at the huisache site than at the grassland site. Evapotranspiration at the grassland site (average of the eddy-covariance evapotranspiration and average remotely sensed evapotranspiration) was 87.6 millimeters per month (mm/mo) and at the huisache site was 100.8 mm/mo, with the differences in evapotranspiration rates being attributed to the difference in site vegetation. After huisache was removed in January 2017, evapotranspiration at the huisache site was substantially lower than at the grassland site, the changes in evapotranspiration rates being attributed not only to removal of huisache vegetation but also to possible disruption of soil runoff and infiltration characteristics. During the post-removal period (February 2017–August 2018), evapotranspiration was 88.5 mm/mo at the grassland site and 72.9 mm/mo at the huisache site (average of the eddy-covariance and average remotely sensed evapotranspiration). The monthly differences in evapotranspiration between the grassland and huisache sites, determined by eddy-covariance and remote-sensing methods, were statistically significant between the pre-removal and post-removal periods. Also, the pre-removal period provided the best conditions to evaluate the differences between huisache site and grassland site evapotranspiration. During the pre-removal period, evapotranspiration from the huisache site as measured by the eddy-covariance method was, on average, 10.7 mm/mo greater than evapotranspiration measured at the grassland site. As determined by the average of the remotely sensed methods, huisache site evapotranspiration was 15.8 mm/mo greater than grassland site evapotranspiration. These average differences in evapotranspiration rates by the two methods indicate that evapotranspiration at the grassland site was, on average, 13.2 mm/mo less than that at the huisache site during the pre-removal period. This average difference in evapotranspiration rates also indicates potential increased groundwater recharge and (or) surface-water runoff at the grassland site.

Texas↗

USGS2019

Assessing potential effects of highway and urban runoff on receiving streams in total maximum daily load watersheds in Oregon using the stochastic empirical loading and dilution model

The Stochastic Empirical Loading and Dilution Model (SELDM) was developed by the U.S. Geological Survey (USGS) in cooperation with the Federal Highway Administration to simulate stormwater quality. To assess the effects of runoff, SELDM uses a stochastic mass-balance approach to estimate combinations of pre-storm streamflow, stormflow, highway runoff, event mean concentrations (EMCs) and stormwater constituent loads from a site of interest. In addition, SELDM can be used to assess the effects of stormwater Best Management Practices (BMPs), which are designed to mitigate the adverse effects of runoff into a waterbody. Adverse effects of stormwater on receiving waters are one of the greatest unsolved water-quality problems Nationwide. State DOTs, municipalities, Federal facilities, and private property owners who manage impervious surfaces need information about the potential magnitude of their contributions and the potential effectiveness of methods to mitigate the adverse effects of runoff. Because the efficacy of at-site controls are limited, information about the potential effectiveness of alternative strategies is needed. The USGS, in cooperation with the Oregon Department of Transportation (ODOT), conducted a study to research methods in which SELDM can be used to enhance the efficiency of ODOT’s stormwater program, support the development of a stormwater banking program, and meet environmental goals. Results can be used to develop a strategic, systems-level approach to stormwater management by considering entire watersheds instead of individual road crossings. Two watersheds, Bear Creek and Mill Creek, in western Oregon were selected for analysis. Within each watershed, seven road crossings were selected for demonstrating the utility of SELDM in nested basins. Precipitation statistics, pre-storm streamflow, runoff coefficients, and hydrograph recession factors were calculated for each location and used in SELDM to simulate flow, water-quality concentrations, and constituent loads in the upstream basin, from the highway (or developed area), and downstream from the road crossing. Three water-quality constituents were selected for modeling: suspended-sediment concentration (SSC), total phosphorus (TP), and total copper (TCu). Using water-quality transport curves, the relations between streamflow and SSC and between streamflow and TP were simulated. Concentrations of TCu were simulated by configuring a linear relation between SSC and TCu. A generic BMP was simulated using the median treatment statistics for flow reductions, hydrograph extensions, concentration reductions, and minimum irreducible concentrations from nine BMP categories with data from the 2012 International BMP database. Five simulation scenarios were modeled for demonstrative purposes. These simulations were used to evaluate potential effects of different watershed properties, water-quality inputs, and stormwater mitigation measures. Instream EMCs were compared to hypothetical water-quality criteria for suspended sediment, total phosphorus, and total copper to demonstrate the concept of water-quality risk analysis. For all five scenarios, it was assumed that highway runoff concentrations were independent of location or average annual daily traffic. These five scenarios are as follows: • Simulation Scenario 1—Natural Conditions (hereafter Simulation Scenario 1) represents conditions in an undeveloped watershed. This scenario demonstrates that the strategic placement of a hypothetical road crossing within a watershed could be used to avoid exceeding water-quality standards of TP and SSC, but that no location choice results in meeting TCu standards. Implementation of BMP had the most pronounced effects on downstream water-quality constituent EMCs at road crossings with the highest ratio of highway catchment area to upstream drainage area, but the largest effect of BMP treatment on mean annual load is based on highway catchment area alone. • Simulation Scenario 2—Current Conditions (hereafter Simulation Scenario 2) represents current watershed conditions, where all developed area upstream from the road crossing was modeled as a highway and combined with the undeveloped part of the upstream drainage area (scenario 2A) and where the output from scenario 2A is used for the upstream area (developed area and the undeveloped area), and where the road crossing is added as usual (scenario 2B). Scenario 2 results indicate that attaining water-quality standards is more difficult with upstream developed areas. Specific road-crossing sites can be selected to achieve the fewest water-quality exceedances per year, but water-quality targets are not met without BMP implementation, and in some instances are not achievable even with BMP implementation. Results from this scenario also serve to quantify the upper limit of constituent reduction if funding were available to implement BMPs to large areas of development, and to quantify how much area would need BMP implementation to achieve water-quality targets. • Simulation Scenario 3—Alternative Road Layouts (hereafter Simulation Scenario 3) was designed to assess the sensitivity of SELDM to various road layouts. In this scenario, different highway configurations were superimposed at one road crossing. Results indicate that downstream waterquality constituent EMCs did not exhibit much variation, but annual water-quality constituent loads varied considerably. • Simulation Scenario 4—Varying Road Width (hereafter Simulation Scenario 4) was designed to assess the sensitivity of SELDM to road width. Similar to scenario 3, the results indicate little variation in downstream water-quality constituent EMCs, but annual water-quality constituent loads increased in proportion to road width. • Simulation scenario 5—Changes to Impervious Area (hereafter Simulation Scenario 5) was designed to investigate the effects of changing amounts of imperviousness upstream from the road crossing. Results indicate that the downstream water-quality constituent EMCs are highly correlated with the percentage of impervious area upstream.

Oregon↗

USGS2020

Water Quality of groundwater used for public supply in principal aquifers of the western United States

Groundwater provides nearly half of the Nation’s drinking water. As the Nation’s population grows, the importance of (and need for) high-quality drinking-water supplies increases. As part of a national-scale effort to assess groundwater quality in principal aquifers (PAs) that supply most of the groundwater used for public supply, the U.S. Geological Survey National Water-Quality Assessment (NAWQA) Project staff sampled six principal aquifers in the western United States between 2013 and 2017: (1) the Basin and Range carbonate-rock aquifers, (2) Basin and Range basin-fill aquifers, (3) Rio Grande aquifer system, (4) High Plains aquifer, (5) Colorado Plateaus aquifers, and (6) Columbia Plateau basaltic-rock aquifers. These six PAs supply a large part of the Nation’s drinking water and cover a large geographic extent of the western conterminous United States. Groundwater samples were analyzed for a large suite of water-quality constituents including major ions, nutrients, trace elements, volatile organic compounds (VOCs), pesticide compounds, radioactive constituents, age tracers, and, in selected PAs, perchlorate. Two types of assessments were made: (1) a status assessment that describes the quality of the groundwater resource at time of collection and (2) an understanding assessment that evaluates relations between groundwater quality and potential explanatory factors that represent characteristics of the aquifer system. The assessments characterize untreated groundwater quality, which might be different than the quality of drinking water delivered to consumers. The assessments are based on water-quality data collected from 352 wells and 6 springs using an equal-area grid sampling design. This sampling approach allows for the estimation of the proportion of high, moderate, or low concentrations relative to federal water-quality benchmarks of selected constituents in the area of each PA. Results were compared to established benchmarks for drinking-water quality to provide context for evaluating the quality of untreated groundwater: Federal regulatory benchmarks for protecting human health, non-regulatory human-health benchmarks, and non-regulatory benchmarks for nuisance chemicals. Not all constituents that were analyzed have benchmarks and thus were not considered for assessments. Concentrations are characterized as high if they are greater than their benchmark. Concentrations are considered moderate if they are greater than one-half their benchmark (for inorganic constituents), or greater than one-tenth their benchmark (for organic constituents). Concentrations are considered low if they are less than moderate or the constituent was not detected. Status assessment results indicated that inorganic constituents more commonly occurred at high and moderate concentrations in the six PAs than organic constituents, and organic constituents predominately occurred at low concentrations. Inorganic constituents that exceeded health-based benchmarks (high concentrations) were present in all six PAs; aquifer-scale proportion were 30 percent in the Rio Grande aquifer system, 22 percent in the Basin and Range basin-fill aquifers, 20 percent in the Basin and Range carbonate-rock aquifers, 19 percent in the High Plains aquifer, 16 percent in the Colorado Plateaus aquifers, and 8 percent in the Columbia Plateau basaltic-rock aquifers. Arsenic, fluoride, manganese, and total dissolved solids were the constituents most commonly present at high concentrations. Organic constituents with human-health benchmarks (pesticide compounds and VOCs) did not occur at high concentrations and moderate concentrations were infrequent; aquifer-scale proportions ranged from 0 to 5 percent. Detections of organic compounds at low concentrations, however, occurred in all six PAs, with detection frequencies ranging from 10 to 26 percent for pesticide compounds and from 10 to 46 percent for VOCs. Specific organic constituents with detection frequencies greater than 10 percent were four herbicides (atrazine, didealkylatrazine, bromoform, and propazine), one insecticide (propoxur), and two VOCs (the trihalomethanes chloroform and bromodichloromethane). Where collected—in the Rio Grande aquifer system and High Plains aquifer—perchlorate did not occur at high concentrations; moderate aquifer-scale proportions were 3 and 11 percent, respectively. The understanding assessment included statistical tests to evaluate relations between constituent concentrations and potential explanatory factors to identify natural and human factors that affect groundwater quality. Potential explanatory factors included depth to bottom of well perforation, groundwater age category, land use, aquifer lithology, hydrologic conditions, and geochemical conditions. Higher concentrations of trace elements, radioactive constituents, and constituents with non-health-based benchmarks generally were associated with unconsolidated sand and gravel aquifer lithologies, premodern groundwater age, greater aridity, and more alkaline pH. Organic constituents with detection frequencies greater than 10 percent generally were associated with urban land use, shallower well depths, and higher total dissolved solids concentrations. The results for the six western PAs provide important insights into the quality of groundwater that is used for drinking water in the western United States, as well as natural and human factors that affect groundwater quality in this region.

Arizona, California, Colorado, Idaho, Kansas, Mont↗

USGS2012

Surface-water salinity in the Gunnison River Basin, Colorado, water years 1989 through 2007

Elevated levels of dissolved solids in water (salinity) can result in numerous and costly issues for agricultural, industrial, and municipal water users. The Colorado River Basin Salinity Control Act of 1974 (Public Law 93-320) authorized planning and construction of salinity-control projects in the Colorado River Basin. One of the first projects was the Lower Gunnison Unit, a project to mitigate salinity in the Lower Gunnison and Uncompahgre River Basins. In cooperation with the Bureau of Reclamation (USBR), the U.S. Geological Survey conducted a study to quantify changes in salinity in the Gunnison River Basin. Trends in salinity concentration and load during the period water years (WY) 1989 through 2004 (1989-2004) were determined for 15 selected streamflow-gaging stations in the Gunnison River Basin. Additionally, trends in salinity concentration and load during the period WY1989 through 2007 (1989-2007) were determined for 5 of the 15 sites for which sufficient data were available. Trend results also were used to identify regions in the Lower Gunnison River Basin (downstream from the Gunnison Tunnel) where the largest changes in salinity loads occur. Additional sources of salinity, including residential development (urbanization), changes in land cover, and natural sources, were estimated within the context of the trend results. The trend results and salinity loads estimated from trends testing also were compared to USBR and Natural Resources Conservation Service (NRCS) estimates of off-farm and on-farm salinity reduction from salinity-control projects in the basin. Finally, salinity from six additional sites in basins that are not affected by irrigated agriculture or urbanization was monitored from WY 2008 to 2010 to quantify what portion of salinity may be from nonagricultural or natural sources. In the Upper Gunnison area, which refers to Gunnison River Basin above the site located on the Gunnison River below the Gunnison Tunnel, estimated mean annual salinity load was 110,000 tons during WY 1989-2004. Analysis of both study periods (WY 1989-2004 and WY 1989-2007) showed an initial decrease in salinity load with a minimum in 1997. The net change over either study period was only significant during WY 1989-2007. Salinity load significantly decreased at the Gunnison River near Delta by 179,000 tons during WY 1989-2004. Just downstream, the Uncompahgre River enters the Gunnison River where there also was a highly significant decrease in salinity load of 55,500 tons. The site that is located at the mouth of the study area is the Gunnison River near Grand Junction where the decrease was the largest. Salinity loads decreased by 247,000 tons during WY 1989-2004 at this site though the decrease attenuated by 2007 and the net change was a decrease of 207,000 tons. The trend results presented in this study indicate that the effect of urbanization on salinity loads is difficult to discern from the effects of irrigated agriculture and that natural sources contribute a fraction of the total salinity load for the entire basin. Based on the calculated yields and geology, 23-63 percent of the estimated annual salinity load was from natural sources at the Gunnison River near Grand Junction during WY 1989-2007. The largest changes in salinity load occurred at the Gunnison River near Grand Junction as well as the two sites located in Delta: the Gunnison River at Delta and the Uncompahgre River at Delta. Those three sites, especially the two sites at Delta, were the most affected by irrigated agriculture, which was observed in the estimated mean annual loads. Irrigated acreage, especially acreage underlain by Mancos Shale, is the target of salinity-control projects intended to decrease salinity loads. The NRCS and the USBR have done the majority of salinity control work in the Lower Gunnison area of the Gunnison River Basin, and the focus has been in the Uncompahgre River Basin and in portions of the Lower Gunnison River Basin (downstream from the Gunnison Tunnel). According to the estimates from the USBR and NRCS, salinity-control projects may be responsible for a reduction of 117,300 tons of salinity as of 2004 and 142,000 tons as of 2007 at the Gunnison River near Grand Junction, Colo. (streamflow-gaging station 09152500). USBR and NRCS estimates account for all but 130,000 tons in 2004 and 65,000 tons in 2007 of salinity load reduction. The additional reduction could be a reduction in natural salt loading to the streams because of land-cover changes during the study period. It is possible also that the USBR and NRCS have underestimated changes in salinity loads as a result of the implementation of salinity-control projects.

Colorado↗

USGS2020

Water resources in the Cheyenne and Arapaho Tribal jurisdictional area, west-central Oklahoma, with an analysis of data gaps through 2015

This report provides an overview of existing hydrologic information describing the quality, quantity, and extent of the major surface-water and groundwater resources in the Cheyenne and Arapaho Tribal jurisdictional area, west-central Oklahoma. Hydrologic information is provided for five major river systems (Cimarron River, North Canadian River, Canadian River, Washita River, and North Fork Red River), two reservoirs (Foss Reservoir and Canton Lake), and eight aquifers consisting of the alluvial aquifers associated with each of the five major river systems and three major bedrock aquifers (Ogallala aquifer, Elk City aquifer, and Rush Springs aquifer). Types of information provided about rivers and reservoirs for the Cheyenne and Arapaho Tribal jurisdictional area include diversion sites and amounts of water allocated and diverted for permitted uses in 2015; treated wastewater discharge sites and amounts discharged in 2015; and characteristics describing water-quality field properties, major ions, nutrients, and selected trace elements. Major ions, nutrients, and selected trace elements are compared to secondary maximum contaminant levels and maximum contaminant levels for finished drinking water. Additionally, statistics are provided describing daily, monthly, and annual streamflow characteristics at 12 U.S. Geological Survey streamgages. Streamflow statistics include the magnitudes and frequencies of floods, base-flow characteristics, and long-term streamflow trends. Types of information provided about the aquifers include amounts of water allocated and pumped for permitted uses in 2015; characteristics of groundwater describing water-quality field properties, major ions, nitrate (measured as nitrogen), and selected trace elements with comparisons to secondary maximum contaminant levels and maximum contaminant levels for finished drinking water; groundwater levels and long-term changes in water levels; and ranges of hydraulic conductivity, aquifer recharge, specific yield, transmissivity, and well yields from reports and groundwater-flow models. Surface water is used primarily for irrigation and mining and other nonconsumptive uses in the Cheyenne and Arapaho Tribal jurisdictional area, except from the Washita and North Fork Red Rivers, where water is treated for use as a public-water supply. Large concentrations of dissolved solids are the primary limiting factor affecting the use of surface water. Median concentrations of dissolved solids in surface water range from less than 1,000 milligrams per liter (mg/L) in samples from the North Canadian River to greater than 9,000 mg/L in samples from the Cimarron River. Large dissolved solids concentrations are correlated with hard water. Median hardness as calcium carbonate concentrations in surface water ranges from 427 mg/L in samples from Canton Lake to 1,000 mg/L in samples from the Washita River. In 2015, groundwater was used at more than twice the rate of surface water in the Cheyenne and Arapaho Tribal jurisdictional area. Although the alluvial aquifers are considered reliably good sources of water in the Cheyenne and Arapaho Tribal jurisdictional area, concentrations of nitrate (measured as nitrogen) exceed the maximum contaminant level of 10 mg/L established by the U.S. Environmental Protection Agency for finished drinking water in parts of all of the alluvial aquifers. Water from the three major bedrock aquifers is used for irrigation, mining, public-water supply, and other uses; however, large concentrations of dissolved solids, nitrate (measured as nitrogen), and naturally occurring trace elements such as arsenic and uranium may limit the use of groundwater as a source of public-water supply in some areas. As of 2015, the depletion of groundwater from the major aquifers in west-central Oklahoma is a minor concern to the Oklahoma Water Resources Board. Groundwater levels and other hydrologic information show that recharge rates exceed the rates of water pumped from aquifers, except in areas that may be affected locally by groundwater depletions.

Oklahoma↗

USGS2008

Determination of Baseline Periods of Record for Selected Streamflow-Gaging Stations in New Jersey for Determining Ecologically Relevant Hydrologic Indices (ERHI)

Hydrologic changes in New Jersey stream basins resulting from human activity can affect the flow and ecology of the streams. To assess future changes in streamflow resulting from human activity an understanding of the natural variability of streamflow is needed. The natural variability can be classified using Ecologically Relevant Hydrologic Indices (ERHIs). ERHIs are defined as selected streamflow statistics that characterize elements of the flow regime that substantially affect biological health and ecological sustainability. ERHIs are used to quantitatively characterize aspects of the streamflow regime, including magnitude, duration, frequency, timing, and rate of change. Changes in ERHI values can occur as a result of human activity, and changes in ERHIs over time at various stream locations can provide information about the degree of alteration in aquatic ecosystems at or near those locations. New Jersey streams can be divided into four classes (A, B, C, or D), where streams with similar ERHI values (determined from cluster analysis) are assigned the same stream class. In order to detect and quantify changes in ERHIs at selected streamflow-gaging stations, a 'baseline' period is needed. Ideally, a baseline period is a period of continuous daily streamflow record at a gaging station where human activity along the contributing stream reach or in the stream's basin is minimal. Because substantial urbanization and other development had already occurred before continuous streamflow-gaging stations were installed, it is not possible to identify baseline periods that meet this criterion for many reaches in New Jersey. Therefore, the baseline period for a considerably altered basin can be defined as a period prior to a substantial human-induced change in the drainage basin or stream reach (such as regulations or diversions), or a period during which development did not change substantially. Index stations (stations with minimal urbanization) were defined as streamflow-gaging stations in basins that contain less than 15 percent urban land use throughout the period of continuous streamflow record. A minimum baseline period of record for each stream class was determined by comparing the variability of selected ERHIs among consecutive 5-, 10-, 15-, and 20-year time increments for index stations. On the basis of this analysis, stream classes A and D were assigned a minimum of 20 years of continuous record as a baseline period and stream classes B and C, a minimum of 10 years. Baseline periods were calculated for 85 streamflow-gaging stations in New Jersey with 10 or more years of continuous daily streamflow data, and the values of 171 ERHIs also were calculated for these baseline periods for each station. Baseline periods were determined by using historical streamflow-gaging station data, estimated changes in impervious surface in the drainage basin, and statistically significant changes in annual base flow and runoff. Historical records were reviewed to identify years during which regulation, diversions, or withdrawals occurred in the drainage basins. Such years were not included in baseline periods of record. For some sites, the baseline period of record was shorter than the minimum period of record specified for the given stream class. In such cases, the baseline period was rated as 'poor'. Impervious surface was used as an indicator of urbanization and change in streamflow characteristics owing to increases in storm runoff and decreases in base flow. Percentages of impervious surface were estimated for 85 streamflow-gaging stations from available municipal population-density data by using a regression model. Where the period of record was sufficiently long, all years after the impervious surface exceeded 10 to 20 percent were excluded from the baseline period. The percentage of impervious surface also was used as a criterion in assigning qualitative ratings to baseline periods. Changes in trends of annual base fl

Scientific Investigations Report↗

USGS2012

Sediment transport to and from small impoundments in northeast Kansas, March 2009 through September 2011

The U.S. Geological Survey, in cooperation with the Kansas Water Office, investigated sediment transport to and from three small impoundments (average surface area of 0.1 to 0.8 square miles) in northeast Kansas during March 2009 through September 2011. Streamgages and continuous turbidity sensors were operated upstream and downstream from Atchison County, Banner Creek, and Centralia Lakes to study the effect of varied watershed characteristics and agricultural practices on sediment transport in small watersheds in northeast Kansas. Atchison County Lake is located in a predominantly agricultural basin of row crops, with wide riparian buffers along streams, a substantial amount of tile drainage, and numerous small impoundments (less than 0.05 square miles; hereafter referred to as “ponds”). Banner Creek Lake is a predominantly grassland basin with numerous small ponds located in the watershed, and wide riparian buffers along streams. Centralia Lake is a predominantly agricultural basin of row crops with few ponds, few riparian buffers along streams, and minimal tile drainage. Upstream from Atchison County, Banner Creek, and Centralia Lakes 24, 38, and 32 percent, respectively, of the total load was transported during less than 0.1 percent (approximately 0.9 days) of the time. Despite less streamflow in 2011, larger sediment loads during that year indicate that not all storm events transport the same amount of sediment; larger, extreme storms during the spring may transport much larger sediment loads in small Kansas watersheds. Annual sediment yields were 360, 400, and 970 tons per square mile per year at Atchison County, Banner, and Centralia Lake watersheds, respectively, which were less than estimated yields for this area of Kansas (between 2,000 and 5,000 tons per square mile per year). Although Centralia and Atchison County Lakes had similar percentages of agricultural land use, mean annual sediment yields upstream from Centralia Lake were about 2.7 times those at Atchison County or Banner Creek Lakes. These data indicate larger yields of sediment from watersheds with row crops and those with fewer small ponds, and smaller yields in watersheds which are primarily grassland, or agricultural with substantial tile drainage and riparian buffers along streams. These results also indicated that a cultivated watershed can produce yields similar to those observed under the assumed reference (or natural) condition. Selected small ponds were studied in the Atchison County Lake watershed to characterize the role of small ponds in sediment trapping. Studied ponds trapped about 8 percent of the sediment upstream from the sediment-sampling site. When these results were extrapolated to the other ponds in the watershed, differences in the extent of these ponds was not the primary factor affecting differences in yields among the three watersheds. However, the selected small ponds were both 45 years old at the time of this study, and have reduced capacity because of being filled in with sediments. Additionally, trapping efficiency of these small ponds decreased over five observed storms, indicating that processes that suspended or resuspended sediments in these shallow ponds, such as wind and waves, affected their trapping efficiencies. While small ponds trapped sediments in small storms, they could be a source of sediment in larger or more closely spaced storm events. Channel slope was similar at all three watersheds, 0.40, 0.46, and 0.31 percent at Atchison County, Banner Creek, and Centralia Lake watersheds, respectively. Other factors, such as increased bank and stream erosion, differences in tile drainage, extent of grassland, or riparian buffers, could be the predominant factors affecting sediment yields from these basins. These results show that reference-like sediment yields may be observed in heavily agricultural watersheds through a combination of field-scale management activities and stream channel protection. When computing loads using published erosion rates obtained by single-point survey methodology, streambank contributions from the main stem of Banner Creek are three times more than the sediment load observed by this study at the sediment sampling site at Banner Creek, 2.6 times more than the sediment load observed by this study at the sediment sampling site at Clear Creek (upstream from Atchison County Lake), and are 22 percent of the load observed by this study at the sediment sampling site at Black Vermillion River above Centralia Lake. Comparisons of study sites to similarly sized urban and urbanizing watersheds in Johnson County, Kansas indicated that sediment yields from the Centralia Lake watershed were similar to those in construction-affected watersheds, while much smaller sediment yields in the Atchison County and Banner Creek watersheds were comparable to stable, heavily urbanized watersheds. Comparisons of study sites to larger watersheds upstream from Tuttle Creek Lake indicate the Black Vermillion River watershed continues to have high sediment yields despite 98 percent of sediment from the Centralia watershed (a headwater of the Black Vermillion River) being trapped in Centralia Lake. Estimated trapping efficiencies for the larger watershed lakes indicated that Banner Creek and Centralia Lakes trapped 98 percent of incoming sediment, whereas Atchison County Lake trapped 72 percent of incoming sediment during the 3-year study period.

Kansas↗

USGS2011

Contributions of Phosphorus from Groundwater to Streams in the Piedmont, Blue Ridge, and Valley and Ridge Physiographic Provinces, Eastern United States

Phosphorus from natural and human sources is likely to be discharged from groundwater to streams in certain geochemical environments. Water-quality data collected from 1991 through 2007 in paired networks of groundwater and streams in different hydrogeologic and land-use settings of the Piedmont, Blue Ridge, and Valley and Ridge Physiographic Provinces in the eastern United States were compiled and analyzed to evaluate the sources, fate, and transport of phosphorus. The median concentrations of phosphate in groundwater from the crystalline and siliciclastic bedrock settings (0.017 and 0.020 milligrams per liter, respectively) generally were greater than the median for the carbonate setting (less than 0.01 milligrams per liter). In contrast, the median concentrations of dissolved phosphate in stream base flow from the crystalline and siliciclastic bedrock settings (0.010 and 0.014 milligrams per liter, respectively) were less than the median concentration for base-flow samples from the carbonate setting (0.020 milligrams per liter). Concentrations of phosphorus in many of the stream base-flow and groundwater samples exceeded ecological criteria for streams in the region. Mineral dissolution was identified as the dominant source of phosphorus in the groundwater and stream base flow draining crystalline or siliciclastic bedrock in the study area. Low concentrations of dissolved phosphorus in groundwater from carbonate bedrock result from the precipitation of minerals and (or) from sorption to mineral surfaces along groundwater flow paths. Phosphorus concentrations are commonly elevated in stream base flow in areas underlain by carbonate bedrock, however, presumably derived from in-stream sources or from upland anthropogenic sources and transported along short, shallow groundwater flow paths. Dissolved phosphate concentrations in groundwater were correlated positively with concentrations of silica and sodium, and negatively with alkalinity and concentrations of calcium, magnesium, chloride, nitrate, sulfate, iron, and aluminum. These associations can result from the dissolution of alkali feldspars containing phosphorus; the precipitation of apatite; the precipitation of calcite, iron hydroxide, and aluminum hydroxide with associated sorption of phosphate ions; and the potential for release of phosphate from iron-hydroxide and other iron minerals under reducing conditions. Anthropogenic sources of phosphate such as fertilizer and manure and processes such as biological uptake, evapotranspiration, and dilution also affect phosphorus concentrations. The phosphate concentrations in surface water were not correlated with the silica concentration, but were positively correlated with concentrations of major cations and anions, including chloride and nitrate, which could indicate anthropogenic sources and effects of evapotranspiration on surface-water quality. Mixing of older, mineralized groundwater with younger, less mineralized, but contaminated groundwater was identified as a critical factor affecting the quality of stream base flow. In-stream processing of nutrients by biological processes also likely increases the phosphorus concentration in surface waters. Potential geologic contributions of phosphorus to groundwater and streams may be an important watershed-management consideration in certain hydrogeologic and geochemical environments. Geochemical controls effectively limit phosphorus transport through groundwater to streams in areas underlain by carbonate rocks; however, in crystalline and siliciclastic settings, phosphorus from mineral or human sources may be effectively transported by groundwater and contribute a substantial fraction to base-flow stream loads.

Scientific Investigations Report↗

USGS2010

Geologic map of the Artemis Chasma quadrangle (V-48), Venus

Artemis, named for the Greek goddess of the hunt, represents an approximately 2,600 km diameter circular feature on Venus, and it may represent the largest circular structure in our solar system. Artemis, which lies between the rugged highlands of Aphrodite Terra to the north and relatively smooth lowlands to the south, includes an interior topographic high surrounded by the 2,100-km-diameter, 25- to 200-km-wide, 1- to 2-km-deep circular trough, called Artemis Chasma, and an outer rise that grades outward into the surrounding lowland. Although several other chasmata exist in the area and globally, other chasmata have generally linear trends that lack the distinctive circular pattern of Artemis Chasma. The enigmatic nature of Artemis has perplexed researchers since Artemis Chasma was first identified in Pioneer Venus data. Although Venus' surface abounds with circular to quasi-circular features at a variety of scales, including from smallest to largest diameter features: small shield edifices (>1 km), large volcanic edifices (100-1,000 km), impact craters (1-270 km), coronae (60-1,010 km), volcanic rises and crustal plateaus (~1,500-2,500 km), Artemis defies classification into any of these groups. Artemis dwarfs Venus' largest impact crater, Mead (~280 km diameter); Artemis also lacks the basin topography, multiple ring structures, and central peak expected for large impact basins. Topographically, Artemis resembles some Venusian coronae; however Artemis is an order of magnitude larger than the average corona (200 km) and about twice the size of Heng-O Corona (which is 1,010 km in diameter), the largest of Venusian coronae. In map view Artemis' size and shape resemble volcanic rises and crustal plateaus; however, both of these classes of features differ topographically from Artemis. Volcanic rises and crustal plateaus form broad domical regions, and steep-sided regions with flat tops, respectively; furthermore, neither rises nor plateaus include circular troughs. So although it seems clear what Artemis is not, there is little consensus about what Artemis is, much less how Artemis formed. Debate during the past decade has resulted in the proposal of at least four hypotheses for Artemis' formation. The first (herein referred to as H1) is that Artemis Chasma represents a zone of northwest-directed convergence and subduction. The second hypothesis (herein referred to as H2) is that Artemis consists of a composite structure with a part of its interior region marking the exposure of deformed ductile deep-crustal rocks analogous to a terrestrial metamorphic core complex. The third (herein referred to as H3) is that Artemis reflects the surface expression of an ancient (>3.5 Ga) huge bolide impact event on cold strong lithosphere. The fourth hypothesis (herein referred to as H4) is that Artemis marks the surface expression of a deep mantle plume. Each of these hypotheses holds different implications for Venus geodynamics and evolution processes, and for terrestrial planet processes in general. Viability of H1 would provide support that terrestrial-like plate-tectonic processes once occurred on Earth's sister planet. The feasibility of H2 would require high values of crustal extension and therefore imply that significant horizontal displacements occurred on Venus-displacement that may or may not be related to terrestrial-like plate-tectonic processes. The possibility of H3 would suggest that Venus' surface is extremely old, and that Venus has experienced very little dynamic activity for the last 3.5 billion years or more; this would further imply that Venus is essentially tectonically dead, and has been for most of its history. This view contrasts strongly with studies that highlight a rich history of Venus including activity at least as young as 750 million years ago, and quite likely up to the present. If H4 has credibility, then Artemis could provide clues to cooling mechanisms of Earth's sister planet. Each of these hypotheses

Scientific Investigations Map↗

USGS2007

Evaluation of Ground Water Near Sidney, Western Nebraska, 2004-05

During times of drought, ground water in the Lodgepole Creek area around Sidney, western Nebraska, may be insufficient to yield adequate supplies to private and municipal wells. Alternate sources of water exist in the Cheyenne Tablelands north of the city, but these sources are limited in extent. In 2003, the U.S. Geological Survey and the South Platte Natural Resources District began a cooperative study to evaluate the ground water near Sidney. The 122-square-mile study area lies in the south-central part of Cheyenne County. with Lodgepole Creek and Sidney Draw occupying the southern and western parts of the study area and the Cheyenne Tablelands occupying most of the northern part of the study area. Twenty-nine monitoring wells were installed and then sampled in 2004 and 2005 for physical characteristics, nutrients, major ions, and stable isotopes. Some of the 29 sites also were sampled for ground-water age dating. Ground water is limited in extent in the tableland areas. Spring 2005 depths to ground water in the tableland areas ranged from 95 to 188 feet. Ground-water flow in the tableland areas primarily is northeasterly. South of a ground-water divide, ground-water flows southeasterly toward Lodgepole Creek Valley. Water samples from monitoring wells in the Ogallala Group were predominantly a calcium bicarbonate type, and those from monitoring wells in the Brule Formation were a sodium bicarbonate type. Water samples from monitoring wells open to the Brule sand were primarily a calcium bicarbonate type at shallow depths and a sodium bicarbonate type at deeper depths. Ground water in Lodgepole Creek Valley had a strong sodium signature, which likely results from most of the wells being open to the Brule. Concentrations of sodium and nitrate in ground-water samples from the Ogallala were significantly different than in water samples from the Brule and Brule sand. In addition, significant differences were seen in concentrations of calcium between water samples from the Ogallala and the Brule sand. Median concentrations of nitrate varied by aquifer-2.6 milligrams per liter (Ogallala). 2.1 milligrams per liter (Brute), and 1.3 milligrams per liter (Brule sand). The chemistry of the ground water in the study area indicates that ground water flows from recharge areas in both the tableland areas and Lodgepole Creek Valley to discharge areas beyond the study area. Recharging water that percolates into the Ogallala in the tableland areas either enters the Ogallala aquifer. flows along the Ogallala-Brule contact, or enters Brule fractures or sand. Although limited in amount, ground water flowing along the Ogallala-Brule contact or in the Brule fractures or sand appears to be the predominant means by which water moves from the tableland areas to Lodgepole Creek Valley. Apparent ground-water ages from chlorofluorocarbon and sulfur hexafluoride data generally were similar. Age of ground water for most monitoring wells located in Lodgepole Creek Valley ranged from the mid- to late 1960s to the early 1990s. Ages of ground water in samples from monitoring wells located in tableland draw areas ranged from the mid-1980s to the early 1990s. Water in the Brule (areas without known secondary permeability structures) or deeper Brule sand aquifer was substantially older than water in the Ogallala aquifer and probably was recharged between 10,000 to 30,000 years before present. The stable isotopic data indicate that the ground water in the study area probably originated from precipitation. Ground water in Lodgepole Creek and the tableland areas are similar in chemistry. However, there appears to be limited interaction between ground water within the Ogallala to the north of Sidney and Lodgepole Creek Valley. Available data indicate that although some of the ground water in the Ogallala likely flows across the Ogallala-Brule contact, most of it does not move toward Lodgepole Creek.

Nebraska↗

USGS2025

Effects of beaver dams and ponds on the transport and deposition of suspended sediment in urban streams of the Tualatin River Basin, northwestern Oregon

Significant Findings This study investigated the effects of natural beaver dams and ponds on sediment transport and deposition in two urban beaver-affected reaches in the Tualatin River Basin, northwestern Oregon. Data were collected during 2016–17 from Fanno Creek at Greenway Park (between SW Hall Boulevard and SW Pearson Court) and Bronson Creek (between NW Laidlaw Road and NW Kaiser Road); each study reach contained multiple beaver dams. Continuous turbidity, discrete suspended-sediment samples, and streamflow measurements were collected during storms and baseflow periods to calculate suspended-sediment loads (SSLs) and to compare differences in SSLs upstream and downstream from the two beaver-affected reaches. Turbidity was measured continuously upstream, within, and downstream from these reaches to evaluate seasonal and longitudinal turbidity patterns and fluctuations. The volume and mass of sediment deposited in a large pond along the Fanno Creek study reach were also estimated. Study results include: Instantaneous SSLs at the upstream reach boundaries often were greater at Bronson Creek compared to Fanno Creek during storm events. These differences were likely caused by the greater mean basin slope upstream from the Bronson Creek reach and its proximity to the headwaters in the Tualatin Mountains. In contrast, the frequency of sediment transport events was greater at the upstream boundary of the Fanno Creek study reach than at the upstream boundary of the Bronson Creek study reach, likely because Fanno Creek has a larger upstream contributing area and more frequent streamflow runoff events typical of urban streams. During water year 2017, approximately 140 metric tons (t) of sediment (11 percent of the total incoming load) were deposited in the Fanno Creek study reach, and 1,420 t of sediment (89 percent of the total incoming load) were deposited in the Bronson Creek study reach. Longitudinal reductions in turbidity were observed in both study reaches but varied among the two reaches. Turbidity reductions along the Fanno Creek study reach were associated with sediment deposition and storage in the south pond, a large floodplain pond formed by a beaver dam. Turbidity decreased gradually along the Bronson Creek study reach, indicating that sediment was deposited between the upstream and downstream boundaries. Differences in decreases in SSLs and turbidity among the two study reaches were attributed to reach characteristics, such as beaver dam characteristics, stream-floodplain hydraulic connections, and the type and density of the vegetation. The eastern part of the south pond in the Fanno Creek study reach trapped approximately 1,100 cubic meters of sediment (estimated 250 t) from 2012 to 2016 (the period between when beaver dams were first built in the reach and when topographic surveys were collected for this study). This amount is equivalent to about one seventh of the mean annual SSL moving through Fanno Creek as estimated by a previous study at the downstream U.S. Geological Survey streamgage at Fanno Creek at Durham Road (14206950). Beaver dams and ponds in urban streams can reduce SSLs and trap sediment. Consideration of reach-specific factors influencing the effects of beaver dams on sediment transport could help create realistic expectations for restoration programs about this potential benefit associated with beaver activity.

Oregon↗

USGS2017

Optimal hydrograph separation using a recursive digital filter constrained by chemical mass balance, with application to selected Chesapeake Bay watersheds

Quantitative estimates of base flow are necessary to address questions concerning the vulnerability and response of the Nation’s water supply to natural and human-induced change in environmental conditions. An objective of the U.S. Geological Survey National Water-Quality Assessment Project is to determine how hydrologic systems are affected by watershed characteristics, including land use, land cover, water use, climate, and natural characteristics (geology, soil type, and topography). An important component of any hydrologic system is base flow, generally described as the part of streamflow that is sustained between precipitation events, fed to stream channels by delayed (usually subsurface) pathways, and more specifically as the volumetric discharge of water, estimated at a measurement site or gage at the watershed scale, which represents groundwater that discharges directly or indirectly to stream reaches and is then routed to the measurement point. Hydrograph separation using a recursive digital filter was applied to 225 sites in the Chesapeake Bay watershed. The recursive digital filter was chosen for the following reasons: it is based in part on the assumption that groundwater acts as a linear reservoir, and so has a physical basis; it has only two adjustable parameters (alpha, obtained directly from recession analysis, and beta, the maximum value of the base-flow index that can be modeled by the filter), which can be determined objectively and with the same physical basis of groundwater reservoir linearity, or that can be optimized by applying a chemical-mass-balance constraint. Base-flow estimates from the recursive digital filter were compared with those from five other hydrograph-separation methods with respect to two metrics: the long-term average fraction of streamflow that is base flow, or base-flow index, and the fraction of days where streamflow is entirely base flow. There was generally good correlation between the methods, with some biased slightly high and some biased slightly low compared to the recursive digital filter. There were notable differences between the days at base flow estimated by the different methods, with the recursive digital filter having a smaller range of values. This was attributed to how the different methods determine cessation of quickflow (the part of streamflow which is not base flow). For 109 Chesapeake Bay watershed sites with available specific conductance data, the parameters of the filter were optimized using a chemical-mass-balance constraint and two different models for the time-dependence of base-flow specific conductance. Sixty-seven models were deemed acceptable and the results compared well with non-optimized results. There are a number of limitations to the optimal hydrograph-separation approach resulting from the assumptions implicit in the conceptual model, the mathematical model, and the approach taken to impose chemical mass balance (including tracer choice). These limitations may be evidenced by poor model results; conversely, poor model fit may provide an indication that two-component separation does not adequately describe the hydrologic system’s runoff response. The results of this study may be used to address a number of questions regarding the role of groundwater in understanding past changes in stream-water quality and forecasting possible future changes, such as the timing and magnitude of land-use and management practice effects on stream and groundwater quality. Ongoing and future modeling efforts may benefit from the estimates of base flow as calibration targets or as a means to filter chemical data to model base-flow loads and trends. Ultimately, base-flow estimation might provide the basis for future work aimed at improving the ability to quantify groundwater discharge, not only at the scale of a gaged watershed, but at the scale of individual reaches as well.

Scientific Investigations Report↗

USGS2011

Modeling hydrodynamics, water temperature, and water quality in the Klamath River upstream of Keno Dam, Oregon, 2006-09

A hydrodynamic, water temperature, and water-quality model was constructed for a 20-mile reach of the Klamath River downstream of Upper Klamath Lake, from Link River to Keno Dam, for calendar years 2006-09. The two-dimensional, laterally averaged model CE-QUAL-W2 was used to simulate water velocity, ice cover, water temperature, specific conductance, dissolved and suspended solids, dissolved oxygen, total nitrogen, ammonia, nitrate, total phosphorus, orthophosphate, dissolved and particulate organic matter, and three algal groups. The Link-Keno model successfully simulated the most important spatial and temporal patterns in the measured data for this 4-year time period. The model calibration process provided critical insights into water-quality processes and the nature of those inputs and processes that drive water quality in this reach. The model was used not only to reproduce and better understand water-quality conditions that occurred in 2006-09, but also to test several load-reduction scenarios that have implications for future water-resources management in the river basin. The model construction and calibration process provided results concerning water quality and transport in the Link-Keno reach of the Klamath River, ranging from interesting circulation patterns in the Lake Ewauna area to the nature and importance of organic matter and algae. These insights and results include: * Modeled segment-average water velocities ranged from near 0.0 to 3.0 ft/s in 2006 through 2009. Travel time through the model reach was about 4 days at 2,000 ft 3 /s and 12 days at 700 ft3/s flow. Flow direction was aligned with the upstream-downstream channel axis for most of the Link-Keno reach, except for Lake Ewauna. Wind effects were pronounced at Lake Ewauna during low-flow conditions, often with circulation in the form of a gyre that rotated in a clockwise direction when winds were towards the southeast and in a counterclockwise direction when winds were towards the northwest. * Water temperatures ranged from near freezing in winter to near 30 degrees C at some locations and periods in summer; seasonal water temperature patterns were similar at the inflow and outflow. Although vertical temperature stratification was not present at most times and locations, weak stratification could persist for periods up to 1-2 weeks, especially in the downstream parts of the reach. Thermal stratification was important in controlling vertical variations in water quality. * The specific conductance, and thus density, of tributaries within the reach usually was higher than that of the river itself, so that inflows tended to sink below the river surface. This was especially notable for inflows from the Klamath Straits Drain, which tended to sink to the bottom of the Klamath River at its confluence and not mix vertically for several miles downstream. * The model was able to capture most of the seasonal changes in the algal population by modeling that population with three algal groups: blue-green algae, diatoms, and other algae. The blooms of blue-green algae, consisting mostly of Aphanizomenon flos aquae that entered from Upper Klamath Lake, were dominant, dwarfing the populations of the other two algae groups in summer. A large part of the blue-green algae population that entered this reach from upstream tended to settle out, die, and decompose, especially in the upper part of the Link-Keno reach. Diatoms reached a maximum in spring and other algae in midsummer. * Organic matter, occurring in both dissolved and particulate forms, was critical to the water quality of this reach of the Klamath River, and was strongly tied to nutrient and dissolved-oxygen dynamics. Dissolved and particulate organic matter were subdivided into labile (quickly decaying) and refractory (slowing decaying) groups for modeling purposes. The particulate matter in summer, consisting largely of dead blue-green algae, decayed quickly. Consequently, this particulate matt

Oregon↗

USGS2019

Sediment classification and the characterization, identification, and mapping of geologic substrates for the glaciated Gulf of Maine seabed and other terrains, providing a physical framework for ecological research and seabed management

A geologic substrate is a surface (or volume) of sediment or rock where physical, chemical, and biological processes occur, such as the movement and deposition of sediment, the formation of bedforms, and the attachment, burrowing, feeding, reproduction, and sheltering of organisms. Seabed mapping surveys in the Stellwagen Bank region off Boston, Massachusetts, from 1993 to 2004 have led to the development of a methodology for characterizing, identifying, and mapping geologic substrates. The resulting high-resolution interpretive maps (1:25,000) show the distribution of substrates in a glaciated terrain of banks and basins in water depths of 30 to 185 meters. Data sources used to characterize substrates are multibeam sonar bathymetric and backscatter imagery to document seabed topography and patterns of sediment and rock distribution, grain-size analyses of sediment samples to determine substrate composition, and video and photographic imagery of the seabed to aid in the interpretation of multibeam sonar imagery and to provide information on substrate layering and mobility, seabed structures, and sediments and nonsediment materials that cannot be physically sampled. Sediment composition is a major property of many seabed substrates. Sediment grains belong to a continuum of grain-diameter sizes previously classified into grades (for example, fine sand, medium sand) and into aggregates (mud, sand, gravel). The definition of grade and aggregate boundaries in a classification is arbitrary, and a useful classification is limited to as few classes as are needed to effectively organize and apply information. For the purpose of mapping substrates, sediment grades and aggregates were simplified and re-classified into eight composite grades based on grain-size content, mode of transport, and ecological role. Five composite grades are identified using grain-size analysis and three are identified using video and photographic imagery of the seabed. Naturally occurring sediments contain various amounts of the aggregates mud, sand, and gravel. The separation of naturally occurring sediments into sediment classes, based on grain-size analysis, requires that limits be set on the amount of mud, sand, and gravel each class contains. Fifteen previously identified basic sediment classes provided interpretive information on sediment transport by emphasizing gravel content (a low 0.01-weight-percent threshold) and on winnowing processes based on the sand-to-mud ratio. The present study recognizes 20 basic sediment classes that are combinations of aggregates in which the lower limits for recognition of mud and sand are 10 weight percent and of gravel, 25 weight percent. These sediment classes can be made more specific by listing their content of the composite grades fine-grained sand (3 and 4 phi), which is transported in suspension, and coarse-grained sand (0, 1, and 2 phi), which is transported as bedload. Additional sediment classes and nonsediment classes that cannot be sampled are recognized on the basis of visual analysis of seabed video and photographic imagery and include pebble, cobble, and boulder gravel, rock outcrops, and shell beds, among others. Substrates are not classified because their properties are too varied for a classification to be concise and useful. Rather, substrates are characterized and identified by sediment grain-size composition (the sediment class); the distribution, in millimeters, of grain diameters in the sediment; the presence of nonsediments (for example, rock outcrops); substrate mobility based on the presence of sediment ripples; substrate layering (for example, a partial veneer of sand on gravel); and seabed structures. These properties have interpretive value by providing information about sedimentary processes acting on a substrate and about its ecological function. A geologic substrate, when it is associated with one or more species, is an important element of a habitat. This methodology was developed to map a glaciated terrain characterized by geologic substrates that typify a wide range of erosional and depositional sedimentary environments, and it likely will be useful for mapping substrates in other terrains. Substrate maps provide the physical framework required for identifying sediment transport processes, validating sediment transport models, studying the ecology of species and communities, and managing marine resources and seabed usage.

Massachusetts↗

USGS2020

Stormwater quality of infrastructure elements in Rapid City, South Dakota, 2016–18

As runoff flows over the land or impervious surfaces (paved streets, parking lots, and building roofs), it accumulates debris, chemicals, sediment, and other contaminants that can adversely affect water quality if the runoff discharge remains untreated. Pathogens, commonly measured using fecal indicator bacteria such as Escherichia coli , enterococci, or fecal coliform, are the most-frequent cause of water-quality impairment in rivers and streams in the United States. Rapid Creek originates in the western Black Hills area and flows east through Rapid City, South Dakota, to its mouth at the Cheyenne River. The water quality of Rapid Creek is important because the reach that flows through Rapid City is a valuable spawning area for a self-sustaining trout fishery, is actively used for recreation, and is a seasonal municipal water supply for the City of Rapid City. These uses (fishery, recreation, and water supply) are considered beneficial uses by the South Dakota Department of Environment and Natural Resources. Numerical criteria have been established for total suspended solids and Escherichia coli concentrations, among other water-quality constituents, for these beneficial uses. The objectives of this study were to improve the method by which fecal indicator bacteria and total suspended solids are quantified in the urban drainages within Rapid City and to provide information that helps identify origins of fecal indicator bacteria and total suspended solids. This information can be used in hydrologic models to estimate fecal indicator bacteria and total suspended solid loading from certain infrastructure elements in urban environments. Stormwater samples analyzed for Escherichia coli , total suspended solids, specific conductance, and pH were collected in three drainage basin flowpaths within Rapid City: Jackson, Wildwood, and the Eco Prayer Park. Data-collection activities for this study focused on upgradient urban flowpath elements during rainfall events. This approach builds upon previous stormwater assessments that characterized the water quality in urban basin outlets near the downstream end of the stormwater flowpaths. Within each flowpath group, 4–6 sites were selected to represent the various infrastructure elements of the runoff process. These elements included roof downspouts, parking lots, street curbs and gutters, open channels, underground storm sewers, and stormwater ponds or best-management practice facilities. In general, the concentrations of Escherichia coli and total suspended solids increased in the downstream direction for all flowpath sites. The wash-off process after the first flush is evident for total suspended solids and specific conductance; however, Escherichia coli concentrations did not necessarily follow the same pattern. Escherichia coli concentrations in the latter part of the runoff period were similar to or greater than the initial concentrations of the first set of samples. Stormwater-quality data were summarized by infrastructure type (roof downspout, parking lot, street curb, and channel/storm sewer) to provide information about approximate water-quality concentrations originating at the upper end of urban flowpaths. Escherichia coli and total suspended solid concentrations were lowest in samples collected from locations most isolated from human influence (roof downspouts); the median concentrations at these sites were 4 most probable number per 100 milliliters and 15 milligrams per liter, respectively. The delivery potential of fecal indicator bacteria and sediment from parking lots and street curbs was similar; median concentrations of Escherichia coli and total suspended solids were around 150–220 most probable number per 100 milliliters and 56–86 milligrams per liter, respectively. The downstream receiving channels and storm sewers where stormwater was aggregated typically contained the highest Escherichia coli concentrations (median was 1,800 most probable number per 100 milliliters), but the total suspended solid concentrations were similar to upstream elements in the flowpath (median was 69 milligrams per liter). The data collected from this study demonstrate that stormwater is contaminated with fecal indicator bacteria upon initial contact with impervious surfaces and highlight the importance of controlling the volume of stormwater discharges into receiving waterbodies via storage structures and pervious elements. Diluting stormwater with high concentrations of Escherichia coli with the receiving water’s (Rapid Creek) lower concentration of Escherichia coli is likely the primary mechanism for meeting the beneficial-use criterion threshold of 235 most probable number per 100 milliliters. Although total suspended solid concentrations in the upper parts of the basin (parking lots and street curbs) also begin at concentrations (56 to 86 milligrams per liter) above the beneficial-use criterion for Rapid Creek (53 milligrams per liter), current stormwater-control practices (storage ponds, swales, and wetlands) may be able to reduce suspended-sediment concentrations to meet this threshold.

South Dakota↗