Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Geological & Geophysical Surveys”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59Linked to original sources
USGS2015

Simulation of groundwater flow and analysis of the effects of water-management options in the North Platte Natural Resources District, Nebraska

The North Platte Natural Resources District (NPNRD) has been actively collecting data and studying groundwater resources because of concerns about the future availability of the highly inter-connected surface-water and groundwater resources. This report, prepared by the U.S. Geological Survey in cooperation with the North Platte Natural Resources District, describes a groundwater-flow model of the North Platte River valley from Bridgeport, Nebraska, extending west to 6 miles into Wyoming. The model was built to improve the understanding of the interaction of surface-water and groundwater resources, and as an optimization tool, the model is able to analyze the effects of water-management options on the simulated stream base flow of the North Platte River. The groundwater system and related sources and sinks of water were simulated using a newton formulation of the U.S. Geological Survey modular three-dimensional groundwater model, referred to as MODFLOW–NWT, which provided an improved ability to solve nonlinear unconfined aquifer simulations with wetting and drying of cells. Using previously published aquifer-base-altitude contours in conjunction with newer test-hole and geophysical data, a new base-of-aquifer altitude map was generated because of the strong effect of the aquifer-base topography on groundwater-flow direction and magnitude. The largest inflow to groundwater is recharge originating from water leaking from canals, which is much larger than recharge originating from infiltration of precipitation. The largest component of groundwater discharge from the study area is to the North Platte River and its tributaries, with smaller amounts of discharge to evapotranspiration and groundwater withdrawals for irrigation. Recharge from infiltration of precipitation was estimated with a daily soil-water-balance model. Annual recharge from canal seepage was estimated using available records from the Bureau of Reclamation and then modified with canal-seepage potentials estimated using geophysical data. Groundwater withdrawals were estimated using land-cover data, precipitation data, and published crop water-use data. For fields irrigated with surface water and groundwater, surface-water deliveries were subtracted from the estimated net irrigation requirement, and groundwater withdrawal was assumed to be equal to any demand unmet by surface water. The groundwater-flow model was calibrated to measured groundwater levels and stream base flows estimated using the base-flow index method. The model was calibrated through automated adjustments using statistical techniques through parameter estimation using the parameter estimation suite of software (PEST). PEST was used to adjust 273 parameters, grouped as hydraulic conductivity of the aquifer, spatial multipliers to recharge, temporal multipliers to recharge, and two specific recharge parameters. Base flow of the North Platte River at Bridgeport, Nebraska, streamgage near the eastern, downstream end of the model was one of the primary calibration targets. Simulated base flow reasonably matched estimated base flow for this streamgage during 1950–2008, with an average difference of 15 percent. Overall, 1950–2008 simulated base flow followed the trend of the estimated base flow reasonably well, in cases with generally increasing or decreasing base flow from the start of the simulation to the end. Simulated base flow also matched estimated base flow reasonably well for most of the North Platte River tributaries with estimated base flow. Average simulated groundwater budgets during 1989–2008 were nearly three times larger for irrigation seasons than for non-irrigation seasons. The calibrated groundwater-flow model was used with the Groundwater-Management Process for the 2005 version of the U.S. Geological Survey modular three-dimensional groundwater model, MODFLOW–2005, to provide a tool for the NPNRD to better understand how water-management decisions could affect stream base flows of the North Platte River at Bridgeport, Nebr., streamgage in a future period from 2008 to 2019 under varying climatic conditions. The simulation-optimization model was constructed to analyze the maximum increase in simulated stream base flow that could be obtained with the minimum amount of reductions in groundwater withdrawals for irrigation. A second analysis extended the first to analyze the simulated base-flow benefit of groundwater withdrawals along with application of intentional recharge, that is, water from canals being released into rangeland areas with sandy soils. With optimized groundwater withdrawals and intentional recharge, the maximum simulated stream base flow was 15–23 cubic feet per second (ft 3 /s) greater than with no management at all, or 10–15 ft 3 /s larger than with managed groundwater withdrawals only. These results indicate not only the amount that simulated stream base flow can be increased by these management options, but also the locations where the management options provide the most or least benefit to the simulated stream base flow. For the analyses in this report, simulated base flow was best optimized by reductions in groundwater withdrawals north of the North Platte River and in the western half of the area. Intentional recharge sites selected by the optimization had a complex distribution but were more likely to be closer to the North Platte River or its tributaries. Future users of the simulation-optimization model will be able to modify the input files as to type, location, and timing of constraints, decision variables of groundwater withdrawals by zone, and other variables to explore other feasible management scenarios that may yield different increases in simulated future base flow of the North Platte River.

Nebraska↗
USGS2023

Summary of the history and research of the U.S. Geological Survey gas hydrate properties laboratory in Menlo Park, California, active from 1993 to 2022

The U.S. Geological Survey (USGS) Clathrate Hydrate Properties Project, active from 1993 to 2022 in Menlo Park, California, stemmed from an earlier project on the properties of planetary ices supported by the National Aeronautics and Space Administration’s (NASA’s) Planetary Geology and Geophysics Program. We took a material science approach in both projects, emphasizing chemical purity of samples, having controlled grain size and grain texture, and having verified crystal structures and phase relations. A foundational contribution from our USGS Gas Hydrate Properties Laboratory (GHPL) was in demonstrating the ability to reproducibly create such pure clathrate hydrate samples for study. Clathrate sample synthesis was achieved by heating sieved and weighed pure granular water ice in the presence of cold clathrate-forming gas or liquid. During heating, the ice melts at the grain scale and reacts with the gas to form clathrate. The resulting material has the desired uniformity and purity, with known intergranular porosity; our subsequent measurements showed that these clathrates exhibited the established clathrate structures and phase relations. This novel synthesis method was successful in creating clathrates of pure methane, ethane, propane, carbon dioxide, and multi-component gases. By mixing sand or silt with granular ice, we were also able to make clathrate-sediment aggregates with controlled grain textures. This simple method, adopted by many others in the community, permitted us to measure the physical and chemical properties of well-characterized and well-crystallized clathrates and clathrate/sediment aggregates. At about the same time, we adapted conventional scanning electron microscopy to cryogenic conditions for analysis of grain-scale characteristics of clathrates made in the GHPL as well as those collected from nature by drill core. The uniformity and reproducibility of our samples also allowed us to investigate how clathrates respond to environmental changes in chemistry, temperature, and pressure: we measured chemical exchange rates with dissolved gas species—such as noble gases and chlorofluorocarbons—as well as rates of clathrate dissolution and decomposition. These advances include the first accurate mapping of the conditions that promote the remarkable process of “anomalous preservation” at room pressure, a metastability that offers potential application for low-cost and safe transportation of natural gas from gas fields far from pipelines. Another advancement stemming from the GHPL was the compaction of as-synthesized porous clathrates to nearly full density by applying external pressure using three different techniques. Compaction allows for high-accuracy measurements of many fundamental physical and chemical properties of these materials, such as elastic wavespeeds and moduli, complete thermal properties, decomposition rates, thermal expansion, and clathrate equations of state. These properties and others, in turn, have helped USGS scientists to interpret geophysical well logs and active geophysical surveys, as well as model the rates of gas production from hydrate deposits in nature. Studying this class of icy minerals that occur in abundance on Earth and in the outer solar system has been a fascinating laboratory journey. Here, we summarize the history and major findings of the USGS GHPL in Menlo Park, including both in-house research as well as findings from the synergistic collaborations with other agencies and institutes that were key to the success of our laboratory. The Menlo Park GHPL was more formally incorporated within the USGS Gas Hydrates Project, a collaboration among multiple USGS Science Centers, in the early 2000s under the leadership of Deborah Hutchinson, and now under the leadership of Carolyn Ruppel and Timothy Collett.

Open-File Report↗
USGS1999

Management of groundwater supply and water quality in the Los Angeles Basin, California

Water use and water needs in the coastal Los Angeles Basin in California have been very closely tied to the development of the region during the last 150 years. The first water wells were drilled in the mid-1800s. Currently about 40% of the water supply (9.4 m3 s-1) in the region is provided by groundwater. Other sources of water supply include reclaimed water and surface water imported from Owens Valley, the Colorado River, and northern California. Increasing groundwater use in the basin led to over-abstraction and seawater instrusion. Because of this, an important component of water management in the area has been the artificial recharge of local, imported, and reclaimed water which is spread in ponds and injected in wells to recharge the aquifer system and control seawater intrusion. The US Geological Survey (USGS) is working co-operatively with the Water Replenishment District of Southern California to evaluate the hydraulic and water-quality effects of these recharge operations and to assess the potential impacts of alternative water-management strategies, including changes in pumping and increases in the use of reclaimed water. As part of this work, the USGS has developed a geographic information system (GIS), collected water-quality and geohydrological data from new and existing wells, and developed a multi-aquifer regional groundwater flow model. Chemical and isotopic data were used to identify the age and source of recharge to groundwater throughout the study area. This information is key to understanding the fate of artificially recharged water and helps define the three-dimensional groundwater flow system. The geohydrological data, especially the geophysical and geological data collected from 11 newly installed multi-completion monitoring wells, were used to redefine the regional hydrostratigraphy. The groundwater flow model is being used to enhance the understanding of the geohydrological system and to quantitatively evaluate new water-management strategies.As part of the work aimed at evaluating the hydraulic and water-quality effects of recharge operations and to assess the potential impacts of alternative water-management strategies, the US Geological Survey (USGS), has developed a geographic information system (GIS), collected water-quality and geohydrological data from new and existing wells, and developed a multi-aquifer regional groundwater flow model. At present, the developed model is being used to enhance the understanding of the geohydrological system and to quantitatively evaluate new water-management strategies.

Conference Paper↗
USGS2012

Crustal structure and composition of the southern Foothills Metamorphic Belt, Sierra Nevada, California, from seismic data

The Foothills Metamorphic Belt is an accreted terrane consisting of Paleozoic and Mesozoic metamorphic rocks that separates the Great Valley from the Sierra Nevada batholith in northern and central California. Until recently, the only available geophysical data for this area were reconnaissance refraction surveys, and gravity and magnetic data. New insights into the structure of the deep crust are provided by the interpretation of a seismic reflection profile (CC‐2), acquired in 1984 by the U.S. Geological Survey at the southern end of the Foothills Metamorphic Belt. Our interpretation is constrained by a new seismic velocity model derived from coincident microearthquake data. Earthquake hypocenters that occur at unusually great depths of 12 to 30 km make the data set particularly useful for obtaining deep crustal velocity information. The velocity model shows velocities of 5.2 to 6.3 km s −1 for the upper 12 km of the crust, and 6.7 to 6.8 km s −1 from 12 km to an estimated Moho at 32 km. The upper crustal velocities correspond to metamorphic rocks and serpentinites of the Foothills Metamorphic Belt as well as to diorites and granodiorites of the Sierra Nevada batholith, while the lower crustal velocities are interpreted to represent intermediate to mafic granulites. The majority of the earthquake hypocenters as well as a 6.7 km s −1 layer in the velocity model corresponds in depth to thick zones of west dipping midcrustal reflections that may represent major shear zones formed during the late Jurassic Nevadan orogeny or synbatholithic ductile shear zones that accommodated crustal extension associated with batholith intrusion. These reflections are truncated updip by an inferred subvertical contact that coincides with the western edge of the Sierra Nevada batholith and the southward trace of the Bear Mountains fault zone. The updip truncation of midcrustal shear zones and high lower crustal velocities indicate that strike‐slip faulting and magmatic underplating can be important processes during the docking and welding of an accreted terrane.

California↗
USGS2016

Characterization of fractures and flow zones in a contaminated crystalline-rock aquifer in the Tylerville section of Haddam, Connecticut

The U.S. Geological Survey, in cooperation with the Connecticut Department of Energy and Environmental Protection, investigated the characteristics of the bedrock aquifer in the Tylerville section of Haddam, Connecticut, from June to August 2014. As part of this investigation, geophysical logs were collected from six water-supply wells and were analyzed to (1) identify well construction, (2) determine the rock type and orientation of the foliation and layering of the rock, (3) characterize the depth and orientation of fractures, (4) evaluate fluid properties of the water in the well, and (5) determine the relative transmissivity and head of discrete fractures or fracture zones. The logs included the following: caliper, electromagnetic induction, gamma, acoustic and (or) optical televiewer, heat-pulse flowmeter under ambient and pumped conditions, hydraulic head data, fluid electrical conductivity and temperature under postpumping conditions, and borehole-radar reflection collected in single-hole mode. In a seventh borehole, a former water-supply well, only caliper, fluid electrical conductivty, and temperature logs were collected, because of a constriction in the borehole. This report includes a description of the methods used to collect and process the borehole geophysical data, the description of the data collected in each of the wells, and a comparison of the results collected in all of the wells. The data are presented in plots of the borehole geophysical logs, tables, and figures. Collectively these data provide valuable characterizations that can be used to improve or inform site conceptual models of groundwater flow in the study area.

Connecticut↗
USGS2007

Time-domain electromagnetic soundings to characterize water quality within a freshwater/saline-water transition zone, Estancia Valley, New Mexico, July 2005: A reconnaissance study

During July 2005, the U.S. Geological Survey, in cooperation with the New Mexico Bureau of Geology and Mineral Resources, conducted a reconnaissance study in the Estancia Valley in central New Mexico to characterize water quality using time-domain electromagnetic (TDEM) surface-geophysical soundings. TDEM sounding is one of a number of surface geophysical methods that provide a relatively quick and inexpensive means to characterize subsurface geologic and hydrogeologic properties. TDEM surface geophysical methods can be used to detect variations in the electrical resistivity of the subsurface, which in turn can be related to variations in the physical and chemical properties of soil, rock, and pore fluids.

New Mexico↗
USGS2010

Quantifying canal leakage rates using a mass-balance approach and heat-based hydraulic conductivity estimates in selected irrigation canals, western Nebraska, 2007 through 2009

The water supply in areas of the North Platte River Basin in the Nebraska Panhandle has been designated as fully appropriated or overappropriated by the Nebraska Department of Natural Resources (NDNR). Enacted legislation (Legislative Bill 962) requires the North Platte Natural Resources District (NPNRD) and the NDNR to develop an Integrated Management Plan (IMP) to balance groundwater and surface-water supply and demand in the NPNRD. A clear understanding of the groundwater and surface-water systems is critical for the development of a successful IMP. The primary source of groundwater recharge in parts of the NPNRD is from irrigation canal leakage. Because canal leakage constitutes a large part of the hydrologic budget, spatially distributing canal leakage to the groundwater system is important to any management strategy. Surface geophysical data collected along selected reaches of irrigation canals has allowed for the spatial distribution of leakage on a relative basis; however, the actual magnitude of leakage remains poorly defined. To address this need, the U.S. Geological Survey, in cooperation with the NPNRD, established streamflow-gaging stations at upstream and downstream ends from two selected canal reaches to allow a mass-balance approach to be used to calculate daily leakage rates. Water-level and sediment temperature data were collected and simulated at three temperature monitoring sites to allow the use of heat as a tracer to estimate the hydraulic conductivity of canal bed sediment. Canal-leakage rates were estimated by applying Darcy's Law to modeled vertical hydraulic conductivity and either the estimated or measured hydraulic gradient. This approach will improve the understanding of the spatial and temporal variability of canal leakage in varying geologic settings identified in capacitively coupled resistivity surveys. The high-leakage potential study reach of the Tri-State Canal had two streamflow-gaging stations and two temperature monitoring sites along its length. Calculated leakage rates from the mass-balance approach varied from year to year and were generally dependent on local climatic conditions, and the timing and magnitude of the initial seasonal diversion into the Tri-State Canal. Leakage rates ranged from 0.98 meter per day (m/d) on June 22, 2007, to about to 0 m/d during July 2009. Drier conditions generally resulted in higher leakage rates because of reduced flow from Spottedtail Creek, lower groundwater levels near Spottedtail Creek, and no unmeasured flow entering the reach. Of the three years studied (2007-09), 2007 was the driest, and therefore had the highest canal leakage rates. The moderately low leakage potential study reach of Interstate Canal had two streamflow-gaging stations and one temperature monitoring site along its length. Excluding the leakage calculations from early May 2007, leakage rates ranged from 0.08 to 0.7 m/d. Less variability in leakage from year to year indicates that climatic conditions may have less of an effect for Interstate Canal compared to Tri-State Canal. This may be because Interstate Canal was cut into the northern edge of the North Platte alluvial valley and consequently the canal bed is well above the local groundwater table resulting in a constant (1 meter per meter [m/m]) hydraulic gradient. Interstate Canal also does not receive any captured flow that can vary substantially year to year. Two temperature monitoring sites were installed within the high-leakage potential reach of Tri-State Canal. Site TCTEMP1 was established in 2007 where the water table was well below the canal bed surface. The vertical hydraulic conductivity of the poorly sorted sand and gravel beneath site TCTEMP1 was estimated using a calibrated one-dimensional VS2DH model. Using a trial-and-error approach, the best-fit vertical hydraulic conductivity for the site TCTEMP1 model domain was 1.1 m/d. Site TCTEMP2 was established at the mouth of Spottedtail Creek where a shallow

Scientific Investigations Report↗
USGS2018

Geohydrology, geochemistry, and numerical simulation of groundwater flow and land subsidence in the Bicycle Basin, Fort Irwin National Training Center, California

Groundwater pumping from Bicycle Groundwater Basin (referred to as Bicycle Basin) in the Fort Irwin National Training Center, California, began in 1967. From 1967 to December 2010, about 46,000 acre-feet of water had been pumped from the basin and transported to the Irwin Basin. During this time, not only did water levels in the basin decline by as much as 100 feet, the quality of the groundwater pumped from the basin also deteriorated in some wells. The U.S. Geological Survey collected geohydrologic data from existing wells, test holes, and 16 additional monitoring wells installed at 6 sites in Bicycle Basin during 1992–2011 to determine the quantity and quality of groundwater available in the basin. Geophysical surveys, including electrical, gravity, and seismic refraction surveys, were completed to help determine the geometry of the structural basin, delineate depths to the interface between Quaternary and Tertiary rocks, map the depth to the water table, and used to develop a geohydrologic framework and groundwater-flow model for Bicycle Basin. Water samples were used to determine the groundwater quality in the basin and to delineate potential sources of poor-quality groundwater. Analysis of stable isotopes of oxygen and hydrogen in groundwater indicated that presentday precipitation is not a major source of recharge to the basin. Tritium and carbon-14 data indicated that most of the groundwater in the basin was recharged prior to 1952 and had an apparent age of 15,625–39,350 years. Natural recharge to the basin was not sufficient to replenish the groundwater pumped from the basin. Interferograms from synthetic aperture radar data (InSAR), analyzed to evaluate land-surface subsidence between 1993 and 2010, showed 0.23 to 1.1 feet of subsidence during this period near one production well north of Bicycle Lake (dry) playa. A groundwater-flow model of Bicycle Basin was developed and calibrated using groundwater levels for 1964– 2010, and a subsidence model using land-surface deformation data for 1993–2010. Between January 1967 and December 2010, the simulated total recharge from precipitation runoff and underflow from adjacent basins was about 5,100 acre-feet and pumpage from the Bicycle Basin was about 47,000 acrefeet of water. Total outflows exceeded natural recharge during this period, resulting in a net loss of about 42,100 acre-feet of groundwater storage in the basin. The Fort Irwin National Training Center is considering various groundwater-management options in the Bicycle Basin. The groundwater-flow model was used to (1) evaluate changes in groundwater levels and subsidence with the addition of capture and recharge of simulated runoff in retention basins (scenario 1) for predevelopment through 2010; (2) simulate a base case (scenario 2) for reference; and (3) compare projections of alternative future pumping strategies for 2011–60 (scenarios 3–5). Model results from the runoff-capture simulation (scenario 1) indicated that total recharge, including runoff captured using retention basins, locally increased water levels, which partially offset, but did not mitigate, groundwater depletion associated with pumping. Groundwater-storage depletion in scenario 1 was about 14 percent less than without runoff capture. Simulated-drawdown results in model layer 1 in the eastern part of the basin indicated that, because of the captured runoff, simulated heads were as much as 100 feet higher in December 2010 than prior to the onset of development in 1967. In contrast, simulated drawdown for model without runoff capture indicated that, without captured runoff, simulated heads for December 2010 in this area were 80–90 feet lower than during the predevelopment period. Subsidence was mitigated slightly in scenario 1 compared to without runoff capture; the largest decrease in subsidence at observation sites was about 0.07 feet.

California↗
USGS2007

Hydrogeology and paths of flow in the carbonate bedrock aquifer, northwestern Indiana

The U.S. Geological Survey (USGS) is assessing the ground.water resources of the carbonate bedrock aquifers in Indiana and Ohio as part of their Regional Aquifer Systems Analysis program. Part of this assessment includes the determination of unknown aspects of the hydraulic characteristics, boundaries, and flow paths of the carbonate aquifer. To accomplish this, the USGS drilled three wells through the carbonate aquifer near the Kankakee River in northwestern Indiana. Geophysical logs were used to help determine depths and thicknesses for testing and to help describe geology at the three wells. Packer tests were used to determine direction of ground-water flow and to provide data for an analysis of the distribution of transmissivity in the carbonate aquifer. Transmissivity of the carbonates is associated with two physical characteristics of the rocks: fractures and interconnected porosity. Almost all of the transmissivity is derived from horizontal fracturing; however, only a few of the fractures present in the carbonate are transmissive. Some transmissivity is associated with a zone of fossiliferous, vuggy dolomite, which yields water from the rock matrix. Most of the transmissivity is associated with large fractures and solution crevices in the upper 30 feet of the bedrock; less transmissivity is associated with the deeper vuggy reef material, even where extensively fractured. Transmissivity of individual fractures and fossiliferous zones ranges from 300 to 27,000 feet squared per day. The aquifer bottom is defined by a lack of transmissive fractures and an increased shale content near the contact of the Silurian and Ordovician sections. Water-level data from the three wells indicate that flow is horizontal at well site 1 north of the Kankakee River, upward at well site 2 near the river, and downward at well site 3 south of the river. Most of the flow occurs in the upper part of the carbonate bedrock where fracturing and solution-enlarged crevices are most developed. Water levels indicate the the Kankakee River is a hydrologic boundary for the regional carbonate bedrock aquifer.

Indiana↗
USGS1977

Borehole geophysical investigations in the south Texas uranium district

Contrasts of electrical properties between uranium deposits and their host rocks in South Texas are subtle. In places where deposits are small or deep, conventional geophysical well-logging techniques and hole-to-hole measurements may be the only practical method to detect changes in rock properties associated with the occurrence of uranium ore deposits. Two separate ore-producing areas in South Texas were chosen for studying borehole geophysical techniques applied to uranium-exploration problems. Extensive measurements of physical properties were made on cores and taken from holes where electrical-resistivity, induced-polarization and gamam-ray logs were run. These analyses show that: (1) induced-polarization anomalies are caused by a change in pyrite content and clay-sized material content and (2) resistivity anomalies are associated with a change in clay-sized material content and cementation. In addition to conventional borehole techniques, hole-to-hole induced-polarization and resistivity tests were made in South Texas. These measurements were made by placing a current source down one hole and a receiver cable down an adjacent hole whose separation ranged from 30 to 300 m and hole depths varied from 80 to 270 m. These tests show that hole-to-hole measurements can be used to detect changes in physical properties, associated with uranium ore, that occur between boreholes. Hole-to-hole measurements provide a link between surface measurements and well logs and can minimize the amount of drilling needed to locate an ore deposit. Accordingly, borehole geophysics will become an increasingly important evaluation tool as mineral exploration goes deeper.

Texas↗
USGS2000

Potential oil and gas resources of the Arctic National Wildlife Refuge in Alaska: 1002 area

A geologist with extensive experience in the study of northern Alaska's petroleum resources provides an overview of the first comprehensive reassessment of the petroleum potential of section 1002 of the Arctic National Wildlife Refuge since the original study of 1987. The paper surveys the region's geology, and provides a description of the methods employed and assessment results. The current resource is compared with that estimated in the original study, and is considerably larger, given the availability of new geologic and geophysical data, improved seismic processing and interpretation capabilities, and changes in the economics of North Slope oil development.

Alaska↗
USGS2013

Modeling volcano growth on the Island of Hawaii: Deep-water perspectives

Recent ocean-bottom geophysical surveys, dredging, and dives, which complement surface data and scientific drilling at the Island of Hawaii, document that evolutionary stages during volcano growth are more diverse than previously described. Based on combining available composition, isotopic age, and geologically constrained volume data for each of the component volcanoes, this overview provides the first integrated models for overall growth of any Hawaiian island. In contrast to prior morphologic models for volcano evolution (preshield, shield, postshield), growth increasingly can be tracked by age and volume (magma supply), defining waxing alkalic, sustained tholeiitic, and waning alkalic stages. Data and estimates for individual volcanoes are used to model changing magma supply during successive compositional stages, to place limits on volcano life spans, and to interpret composite assembly of the island. Volcano volumes vary by an order of magnitude; peak magma supply also varies sizably among edifices but is challenging to quantify because of uncertainty about volcano life spans. Three alternative models are compared: (1) near-constant volcano propagation, (2) near-equal volcano durations, (3) high peak-tholeiite magma supply. These models define inconsistencies with prior geodynamic models, indicate that composite growth at Hawaii peaked ca. 800–400 ka, and demonstrate a lower current rate. Recent age determinations for Kilauea and Kohala define a volcano propagation rate of 8.6 cm/yr that yields plausible inception ages for other volcanoes of the Kea trend. In contrast, a similar propagation rate for the less-constrained Loa trend would require inception of Loihi Seamount in the future and ages that become implausibly large for the older volcanoes. An alternative rate of 10.6 cm/yr for Loa-trend volcanoes is reasonably consistent with ages and volcano spacing, but younger Loa volcanoes are offset from the Kea trend in age-distance plots. Variable magma flux at the Island of Hawaii, and longer-term growth of the Hawaiian chain as discrete islands rather than a continuous ridge, may record pulsed magma flow in the hotspot/plume source.

Hawai'i↗
USGS1980

Distribution of molybdenum in heavy-mineral concentrates, Richfield 1 degree by 2 degrees Quadrangle, Utah

The purpose of these maps is to provide the regional geochemical framework for the U.S. Geological Survey's Conterminous United States Mineral Assessment Program (CUSMAP) for the Richfield 1° x 2° quadrangle. The regional sampling is designed to provide definition of broad geochemical patterns and trends which can be utilized along with geologic and geophysical data for the assessment of the mineral resource potential for this quadrangle. These maps show the regional distributions of molybdenum in two fractions of heavy-mineral concentrates of drainage sediments for the Richfield 1° x 2° quadrangle.

Utah↗
USGS2000

Hydrogeology and simulation of ground-water flow at the Gettysburg Elevator Plant Superfund Site, Adams County, Pennsylvania

Ground water in Triassic-age sedimentary fractured-rock aquifers in the area of Gettysburg, Pa., is used as drinking water and for industrial and commercial supply. In 1983, ground water at the Gettysburg Elevator Plant was found by the Pennsylvania Department of Environmental Resources to be contaminated with trichloroethene, 1,1,1-trichloroethane, and other synthetic organic compounds. As part of the U.S. Environmental Protection Agency?s Comprehensive Environmental Response, Compensation, and Liability Act, 1980 process, a Remedial Investigation was completed in July 1991, a method of site remediation was issued in the Record of Decision dated June 1992, and a Final Design Report was completed in May 1997. In cooperation with the U.S. Environmental Protection Agency in the hydrogeologic assessment of the site remediation, the U.S. Geological Survey began a study in 1997 to determine the effects of the onsite and offsite extraction wells on ground-water flow and contaminant migration from the Gettysburg Elevator Plant. This determination is based on hydrologic and geophysical data collected from 1991 to 1998 and on results of numerical model simulations of the local ground-water flow-system. The Gettysburg Elevator Site is underlain by red, green, gray, and black shales of the Heidlersburg Member of the Gettysburg Formation. Correlation of natural-gamma logs indicates the sedimentary rock strike about N. 23 degrees E. and dip about 23 degrees NW. Depth to bedrock onsite commonly is about 6 feet but offsite may be as deep as 40 feet. The ground-water system consists of two zones?a thin, shallow zone composed of soil, clay, and highly weathered bedrock and a thicker, nonweathered or fractured bedrock zone. The shallow zone overlies the bedrock zone and truncates the dipping beds parallel to land surface. Diabase dikes are barriers to ground-water flow in the bedrock zone. The ground-water system is generally confined or semi-confined, even at shallow depths. Depth to water can range from flowing at land surface to more than 71 feet below land surface. Potentiometric maps based on measured water levels at the Gettysburg Elevator Plant indicate ground water flows from west to east, towards Rock Creek. Multiple-well aquifer tests indicate the system is heterogeneous and flow is primarily in dipping beds that contain discrete secondary openings separated by less permeable beds. Water levels in wells open to the pumped bed, as projected along the dipping stratigraphy, are drawn down more than water levels in wells not open to the pumped bed. Ground-water flow was simulated for steady-state conditions prior to pumping and long-term average pumping conditions. The three-dimensional numerical flow model (MODFLOW) was calibrated by use of a parameter estimation program (MODFLOWP). Steady-state conditions were assumed for the calibration period of 1996. An effective areal recharge rate of 7 inches was used in model calibration. The calibrated flow model was used to evaluate the effectiveness of the current onsite and offsite extraction well system. The simulation results generally indicate that the extraction system effectively captures much of the ground-water recharge at the Gettysburg Elevator Plant and, hence, contaminated ground-water migrating from the site. Some of the extraction wells pump at low rates and have very small contributing areas. Results indicate some areal recharge onsite will move to offsite extraction wells.

Pennsylvania↗
USGS2013

Abstracts for the October 2012 meeting on volcanism in the American Southwest, Flagstaff, Arizona

Though volcanic eruptions are comparatively rare in the American Southwest, the States of Arizona, Colorado, New Mexico, Nevada, and Utah host Holocene volcanic eruption deposits and are vulnerable to future volcanic activity. Compared with other parts of the western United States, comparatively little research has been focused on this area, and eruption probabilities are poorly constrained. Monitoring infrastructure consists of a variety of local seismic networks, and ”backbone“ geodetic networks with little integration. Emergency response planning for volcanic unrest has received little attention by either Federal or State agencies. On October 18–20, 2012, 90 people met at the U.S. Geological Survey campus in Flagstaff, Arizona, providing an opportunity for volcanologists, land managers, and emergency responders to meet, converse, and begin to plan protocols for any future activity. Geologists contributed data on recent findings of eruptive ages, eruption probabilities, and hazards extents (plume heights, ash dispersal). Geophysicists discussed evidence for magma intrusions from seismic, geodetic, and other geophysical techniques. Network operators publicized their recent work and the relevance of their equipment to volcanic regions. Land managers and emergency responders shared their experiences with emergency planning for earthquakes. The meeting was organized out of the recognition that little attention had been paid to planning for or mitigation of volcanic hazards in the American Southwest. Moreover, few geological meetings have hosted a session specifically devoted to this topic. This volume represents one official outcome of the meeting—a collection of abstracts related to talks and poster presentations shared during the first two days of the meeting. In addition, this report includes the meeting agenda as a record of the proceedings. One additional intended outcome will be greater discussion and coordination among emergency responders, geologists, geophysicists, and land managers regarding geologic hazards in the Southwest.

Arizona, Colorado, New Mexico, Nevada, Utah↗
USGS2006

Magnetotelluric data collected near geophysically logged boreholes in the Española and Middle Rio Grande Basins, New Mexico

The Santa Fe region is growing rapidly. The Santa Fe Group aquifer in the Española Basin is the main source of municipal water for the region, and water shortfalls could have serious consequences. Future growth and land management in the region depend on accurate assessment and protection of the region's ground-water resources. An important issue in managing the ground-water resources is a better understanding of the hydrogeology of the Tertiary Santa Fe Group. The Santa Fe Group includes the sedimentary deposits that fill the Rio Grande rift and contain the principal ground-water aquifers. The U.S. Geological Survey (USGS) is conducting a series of multidisciplinary studies of the Española Basin in northern New Mexico. Detailed geologic mapping, high-resolution airborne magnetic surveys, electromagnetic surveys, and hydrologic, lithologic, and hydro-geochemical data are being used to better understand the aquifer systems. Magnetotelluric (MT) surveys were completed as part of these studies. The primary purpose of the MT surveys was to map changes in electrical resistivity with depth that are related to differences in various rock types that help control the properties of aquifers in the region. Resistivity modeling of the MT data can be used to investigate buried structures related to the basic geologic framework of the study area. The purpose of this report is to release MT sounding data collected near geophysically logged boreholes in the study area, including the nearby Middle Rio Grande Basin. This MT data can be used in subsequent resistivity modeling. No interpretation of the data is included in this report.

New Mexico↗
USGS2022

Northern Cascadia Margin gas hydrates — Regional geophysical surveying, IODP drilling leg 311, and cabled observatory monitoring

This article reviews extensive geophysical survey data, ocean drilling results and long-term seafloor monitoring that constrain the distribution and concentration of gas hydrates within the accretionary prism of the northern Cascadia subduction margin, located offshore Vancouver Island in Canada. Seismic surveys and geologic studies conducted since the 1980s have mapped the bottom simulating reflector (BSR), detected gas hydrate occurrence and estimated gas hydrate and free gas concentrations. Additional constraints were obtained from seafloor-towed, controlled-source electromagnetic surveying. A component of these studies has been the examination of low-temperature seafloor vents and seeps that emit gas and fluids into the ocean. These features are identified seismically as chimney-like zones of reduced acoustic reflectivity within the sediment stratigraphy, functioning as conduits for gas and fluid migration from below the BSR to the seafloor. Gas hydrates have been recovered from the seafloor and from sediment cores at vent sites, mostly in massive (nodular) form and as a vein-like fracture filling. The Ocean Networks Canada cabled NEPTUNE observatory has gathered extensive continuous, long-term observations on gas hydrate dynamics at the seafloor and in boreholes at two nodes on the continental slope featuring high gas hydrate concentrations. Measurements taken at the observatory include a time-series of gas bubble emission rates, changes in the near-seafloor electromagnetic structure and seafloor compliance linked to gas hydrate formation and dissociation. Two Integrated Ocean Drilling Program (IODP) expeditions collected cores, measured downhole properties and deployed downhole instruments within the central accretionary prism. At IODP Site U1364, pore pressures are being monitored above and below the base of the gas hydrate stability zone at a slope setting using an “Advanced Circulation Obviation Retrofit Kit” (A-CORK). Downhole pore pressures, temperatures and electrical resistivities also are being monitored at IODP Site U1416 using the “Simple Cabled Instrument for Measuring Parameters In Situ” (SCIMPI) tool at a vent site from near-seafloor to just above the base of the gas hydrate stability zone.

British Columbia↗