Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “The Depositional Record”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58Linked to original sources

Effects of Cenozoic subduction along the outboard margin of the Northern Cordillera: Derived from e-book on the Northern Cordillera (Alaska and Western Canada) and adjacent marine areas

This article describes the regional effects of Cenozoic subduction along the outboard margin of the Northern Cordillera (Alaska, USA, and Western Canada), and thereby acquaints the reader with several chapters of the e-book Dynamic Geology of the Northern Cordillera (Alaska, Western Canada, and Adjacent Marine Areas) . This article and the e-book are written for earth-science students and teachers. The level of writing for the article and the source e-book is that of popular science magazines, and readers are encouraged to share this article with students and laypersons. The main thrust of the article is to present and describe a suite of ten regional topographic, bathymetric, and geologic maps, and two figures portraying deep-crustal sections that illustrate the regional effects of Cenozoic subduction along the outboard margin of the North American Cordillera. The regional maps and cross sections are described in a way that a teacher might describe a map to students. Cenozoic subduction along the margin of the Northern Cordillera resulted in the formation of the following: (1) underthrusting of terranes and oceanic lithosphere beneath Southern Alaska; (2) landscapes, including narrow continental shelves along Southern and Southeastern Alaska and Western Canada (the Canadian Cordillera) and continental-margin mountain ranges, including the Alaska Peninsula, Chugach Range, Saint Elias Mountains, and Cascade Mountains; (3) sedimentary basins; (4) an array of active continental strike-slip and thrust faults (inboard of subduction zones); (5) earthquake belts related to subduction of terranes and oceanic plates; (6) active volcanoes, including continental-margin arcs (the Aleutian, Wrangell, and Cascade Arcs) linked to subduction zones, and interior volcanic belts related to strike-slip faulting or to hot spots; (7) lode and placer mineral deposits related to continental margin arcs or subduction of oceanic ridges; (8) hot springs related to continental-margin arcs; (9) plate movements as recorded from GPS measurements; and (10) underthrusting of terranes and oceanic lithosphere beneath the Northern Cordillera.

Alaska, British Columbia, Idaho, Montana, Washingt↗

Hydrologic data for the Columbia/Eagle Bluffs Wetland Complex, Columbia, Missouri-1993-96

The U.S. Geological Survey, in cooperation with the Missouri Department of Conservation and the city of Columbia, Missouri, collected hydrologic data from September 1993 through October 1996 as part of a hydrologic characterization of the Columbia/Eagle Bluffs Wetland Complex. The wetland complex was constructed in the Missouri River alluvial plain adjacent to the Columbia municipal supply wells. Part of the wetland complex was designed to treat sewage effluent from Columbia, with the treated effluent being used as the primary water source for wetland management practices on the Eagle Bluffs Wildlife Area. This report presents hydrologic data and the procedures used to collect the data, which include water-quality analyses of samples collected quarterly from 28 wells and 2 surface-water sites. Four additional wells were incorporated into the monitoring network in November 1994 and also were sampled quarterly. Data from these 4 wells also are included. Water samples were analyzed for specific conductance, pH, temperature, dissolved oxygen, bacteria, alkalinity, major cations and anions, nutrients, trace elements, and total and dissolved organic carbon. Dissolved nitrite plus nitrate as nitrogen concentrations were equal to or less than 5.2 milligrams per liter for all ground-water samples and were equal to or less than 2.7 milligrams per liter in surface-water samples. Dissolved phosphorous concentrations ranged from less than 0.01 to 2.2 milligrams per liter in the ground-water samples, and from less than 0.01 to 0.19 milli-grams per liter in the surface-water samples. Fecal coliform bacteria counts ranged from less than 1 to 39 colonies per 100 milliliters for ground-water samples, and from 1 to greater than 6,000 colonies per 100 milliliters for surface-water samples. Fecal streptococcus bacteria counts ranged from less than 1 to 92 colonies per 100 milliliters for ground-water samples, and from 2 to greater than 10,000 colonies per 100 milliliters for surface-water samples. Samples for well USGS-6 had dissolved arsenic concentrations that exceeded 50 micrograms per liter. Dissolved manganese concentrations exceeded 50 micrograms per liter at least once for each site except for USGS-9S. Dissolved iron concentrations exceeded 300 micro-grams per liter at least once for 28 of 34 sites. Samples from 8 of the 32 wells and both surface-water sites were analyzed for base/neutral/ acid semi-volatile organic compounds, selected pesticides, selected organochlorine compounds, and purgeable volatile organic compounds. All but one of the organic compounds detected in the samples collected from the monitoring wells or surface-water sites were pesticides. Atrazine was detected consistently at both surface-water sites. Other frequently detected pesticides include metolachlor, diazinon, chlorpyrifos, prometon, and simazine. Following the 1993 Missouri River flood samples of residual flood water and flood-deposited sediments were collected from the Columbia/ Eagle Bluffs Wetland Complex. A brief description of the flooding and damage to the study area is presented. Methods of collection of the four residual flood water and the four flood-deposited sediment samples, as well as the analytical results of these samples, are included in this report. Data from two continuous water-level recorders and from quarterly water-level measurements in wells also are included.

Missouri↗

Ecosystem effects in the Lower Mississippi River Basin

The 2011 Mississippi River flood in the Lower Mississippi River Basin was one of the largest flood events in recorded history, producing the largest or next to largest peak streamflow for the period of record at a number of streamgages on the lower Mississippi River. Ecosystem effects include changes to wetlands, nutrient transport, and land accretion and sediment deposition changes. Direct effects to the wetland ecosystems in the Lower Mississippi River Basin were minimized because of the expansive levee system built to pass floodwaters. Nutrients carried by the Mississippi River affect water quality in the Lower Mississippi River Basin. During 2011, nutrient fluxes in the lower Mississippi River were about average. Generally, nutrient delivery of the Mississippi and Atchafalaya Rivers contributes to the size of the hypoxic zone in the Gulf of Mexico. Based on available limited post-flood satellite imagery, some land expansion in both the Wax Lake and Atchafalaya River Deltas was observed. A wetland sediment survey completed in June 2011 indicated that recent sediment deposits were relatively thicker in the Atchafalaya and Mississippi River (Birdsfoot) Delta marshes compared to marshes farther from these rivers.

Louisiana, Mississippi↗

Seafloor environments within the Boston Harbor- Massachusetts Bay sedimentary system: A regional synthesis

Modern seafloor sedimentary environments within the glaciated, topographically complex Boston Harbor and Massachusetts Bay area have been interpreted and mapped from an extensive collection of sidescan sonar records and supplemental marine geologic data. Three categories of environments are present that reflect the dominant long-term processes of erosion or nondeposition, deposition, and sediment reworking. (1) Environments of erosion or nondeposition comprise exposures of bedrock, glacial drift, coarse lag deposits, and possibly coastal plain rocks that contain sediments (where present) ranging from boulder fields to gravelly sands and occur in areas of relatively strong currents. (2) Environments of deposition contain fine-grained sediments ranging from muddy sands to muds that have accumulated in areas of predominantly weak bottom currents. (3) Environments of sediment reworking contain patches with textures ranging from sandy gravels to muds that have been produced by a combination of erosion and deposition in areas with variable bottom currents. The distribution of sedimentary environments across the Boston Harbor-Massachusetts Bay area is extremely patchy. Locally, this patchiness is due either to modifications of bottom-current strength (caused by the irregular topography and differences in water depth) or to small-scale changes in the supply of fine-grained sediments. Regional patchiness, however, reflects differences in geologic and oceanographic conditions among the estuarine, inner shelf, and basinal parts of the sedimentary system. The estuarine part of the system (Boston Harbor) is a depositional trap for fine-grained sediments because it is protected from large waves, has generally weak and variable tidal currents, and receives a large supply of fine grained detritus from natural and anthropogenic sources. The inner shelf, on the other hand, is largely an area of erosion or nondeposition due to sediment removal and redistribution during past sea-level changes, to sediment resuspension and winnowing by modern waves and currents, and to an inadequate supply of fine-grained sediments. The basinal part of the system (Stellwagen Basin) is mainly a tranquil depositional environment in which fine-grained sediments from several potential sources settle through the water column and accumulate under weak bottom currents. This study indicates areas within the Boston Harbor-Massachusetts Bay sedimentary system where fine-grained sediments and associated contaminants are likely to be either moved or deposited. It also provides a guide to the locations and variability of benthic habitats.

Massachusetts Bay↗

From buttes to bowls: Repeated relief inversion in the landscape of the Colorado Piedmont

Mesas and buttes of the central Colorado Piedmont are composed of at least two distinct rock types, which differ in their cohesiveness and resistance to erosion. The lower parts of the exposed stratigraphic section are poorly cemented, Upper Cretaceous to Middle Eocene sandstones of the Dawson Formation. The caprocks are composed of one or more resistant formations of Late Eocene age: the Castle Rock Conglomerate, Wall Mountain Tuff, and the conglomerate of Larkspur Butte. These formations were originally deposited in topographic lows, but due to their resistance,they now cap prominent buttes and mesas of the Colorado Piedmont. Erosion of the caprock through progressive retreat of the butte scarp produces colluvium that has a higher resistance to erosion than the poorly cemented underlying sandstone. Once the caprock of a butte has been removed by erosion, the underlying weakly cemented Dawson Formation is readily eroded. Ultimately, the armored lower slopes of the former butte remain as a circular ridge standing as much as 100 m above the surrounding topography. This process produces a topographic low surrounded by relict faceted slopes where the flat top of the butte once stood. Prominent alluvial fans are associated with some of these annular features, and they record the main phases of butte removal and excavation of the central part of the armored slopes. Multiple generations of alluvial fans contain coarse- and fine-grained facies that represent changes in effective stream power and record alternating phases of aggradation and erosion. The degree of soil development in the fan alluvium and height of the fan surfaces above streams indicates the oldest preserved gravel fan deposit is of late-middle Pleistocene age. The youngest luminescence (optically stimulated luminescence) dated alluvial fans were deposited during the late Pleistocene about the time of the Pinedale glacial maximum in Colorado, ca. 21,000 yr B.P.

Colorado↗

Testing glacial isostatic adjustment models of last-interglacial sea level history in the Bahamas and Bermuda

Part of the spatial variation in the apparent sea-level record of the last interglacial (LIG) period is due to the diverse response of coastlines to glacial isostatic adjustment (GIA) processes, particularly where coastlines were close to the Laurentide Ice Sheet during the past two glacial periods. We tested modeled LIG paleo-sea levels on New Providence Island (NPI), Bahamas and Bermuda by investigating emergent coral patch reefs and oolitic/peloidal beach deposits. Corals with closed-system histories collected from patch reefs on NPI have ages of 128-118 ka and ooids/peloids from beach ridges have closed-system ages of 128-116 ka. Elevations of patch reefs indicate a LIG paleo-sea level of at least ∼7 m to ∼9 m above present. Beach ridge sediments indicate paleo-sea levels of ∼5 m to ∼14 m (assuming subsidence, ∼7 m to ∼16 m) above present during the LIG. Some, though not all of these measurements are in good agreement with GIA models of paleo-sea level that have been simulated for the Bahamas. On Bermuda, corals with closed-system histories collected from marine deposits have ages of 126-114 ka. Although coral-bearing marine deposits on Bermuda lack the precise indication of paleo-sea level provided by patch reefs and oolitic beach ridges, these sediments nevertheless provide at least a first-order estimate of paleo-sea level. Paleo-sea level records on Bermuda are consistently lower (∼2 m to ∼7 m) than what GIA models simulate for the LIG. The reason for the reasonable agreement with models for the Bahamas and poor agreement for Bermuda is not understood, but needs further investigation in light of the probability of a higher sea level in the near future.

Quaternary Science Reviews↗

Effects of acid deposition on dissolution of carbonate stone during summer storms in the Adirondack Mountains, New York, 1987-89

This study is part of a long-term research program designed to identify and quantify acid rain damage to carbonate stone. Acidic deposition accelerates the dissolution of carbonate-stone monuments and building materials. Sequential sampling of runoff from carbonate-stone (marble) and glass (reference) microcatchments in the Adirondack Mountains in New York State provided a detailed record of the episodic fluctuations in rain rate and runoff chemistry during individual summer storms. Rain rate and chemical concentrations from carbonate-stone and glass runoff fluctuated three to tenfold during storms. Net calcium-ion concentrations from the carbonatestone runoff, a measure of stone dissolution, typically fluctuated twofold during these storms. High net sulfate and net calcium concentrations in the first effective runoff at the start of a storm indicated that atmospheric pollutants deposited on the stone surface during dry periods formed calcium sulfate minerals, an important process in carbonate stone dissolution. Dissolution of the carbonate stone generally increased up to twofold during coincident episodes of low rain rate (less than 5 millimeters per hour) and decreased rainfall (glass runoff) pH (less than 4.0); episodes of high rain rate (cloudbursts) were coincident with a rapid increase in rainfall pH and also a rapid decrease in the dissolution of carbonate-stone. During a storm, it seems the most important factors causing increased dissolution of carbonate stone are coincident periods of low rain rate and decreased rainfall pH. Dissolution of the carbonate stone decreased slightly as the rain rate exceeded about 5 millimeters per hour, probably in response to rapidly increasing rainfall pH during episodes of high rain rate and shorter contact time between the runoff and the stone surface. High runoff rates resulting from cloudbursts remove calcium sulfate minerals formed during dry periods prior to storms and also remove dissolution products formed in large measure by chemical weathering as a result of episodes of low rain rate and decreased rainfall pH during a storm.

Water-Resources Investigations Report↗

The Miocene Atastra Creek sinter (Bodie Hills volcanic field, California and Nevada): 4D evolution of a geomorphically intact siliceous hot spring deposit

The Atastra Creek siliceous hot spring deposit, or sinter, occurs in the Paramount-Bald Peak alteration zone, due north of the Bodie precious metals mining district in the Miocene Bodie Hills volcanic field, California and Nevada, U.S.A. Distinctive features include its geomorphically intact geyser vent mounds, the presence of growth-fault-stepped sinter terraces that developed westward along a NNW trending fault, and atypical Hg, Sb and As concentrations. High-temperature (>75 °C), subaerial, proximal apron sinter occurs in two settings – (1) radiating botryoidal geyserite in vent mounds and (2) bedded geyserite (columnar, nodular, size-sorted geyser eggs) intercalated with mid- to low-temperature (<60 °C), middle to distal apron terrace sinter. The active geyser vent mounds migrated from south to north across the apron terrace through time. A newly recognized, visually striking type of sinter – termed silica infiltrate herein – formed directly beneath the subaerial geyserite deposits. It is characterized by mainly parallel, thin, irregular beds of white silica with narrow borders of dark blue-gray silica, as well as swirly to globular white silica, all chaotically linked together by silica ‘necks’ and ‘bridges’. The silica infiltrate permeates the pre-existing sinter, and is interpreted to represent super-heated fluid injections into the immediately overlying geyser vent mounds and pools. The adjacent sinter sheets preserve fluid-flow directions of warm-water channels that traversed the discharge apron, including microbial streamer fabric and wavy laminated sinter with flattened bubbles. More distal sinter textures are recorded by rimmed terracettes with mammillated and palisade microbial fabrics and rare, warm pool-related stromatolites. However, plants are absent, probably due to the high metalloids, in particular As. Post-depositional events include an inferred hydrothermal eruption breccia and an interpreted drop in the water table accompanied by incursion of steam acid condensate, as evidenced by pervasive hydrothermal alteration of the Atastra Creek deposits. Hence, the well-exposed sedimentary facies distributions, well-preserved geomorphology, and stratigraphic and structural relationships together allow an unusually complete, paleoenvironmental reconstruction of the Atastra Creek paleohydrothermal deposit.

Journal of Volcanology and Geothermal Research↗

Methods for estimating low-flow statistics for Massachusetts streams

Methods and computer software are described in this report for determining flow duration, low-flow frequency statistics, and August median flows. These low-flow statistics can be estimated for unregulated streams in Massachusetts using different methods depending on whether the location of interest is at a streamgaging station, a low-flow partial-record station, or an ungaged site where no data are available. Low-flow statistics for streamgaging stations can be estimated using standard U.S. Geological Survey methods described in the report. The MOVE.1 mathematical method and a graphical correlation method can be used to estimate low-flow statistics for low-flow partial-record stations. The MOVE.1 method is recommended when the relation between measured flows at a partial-record station and daily mean flows at a nearby, hydrologically similar streamgaging station is linear, and the graphical method is recommended when the relation is curved. Equations are presented for computing the variance and equivalent years of record for estimates of low-flow statistics for low-flow partial-record stations when either a single or multiple index stations are used to determine the estimates. The drainage-area ratio method or regression equations can be used to estimate low-flow statistics for ungaged sites where no data are available. The drainage-area ratio method is generally as accurate as or more accurate than regression estimates when the drainage-area ratio for an ungaged site is between 0.3 and 1.5 times the drainage area of the index data-collection site. Regression equations were developed to estimate the natural, long-term 99-, 98-, 95-, 90-, 85-, 80-, 75-, 70-, 60-, and 50-percent duration flows; the 7-day, 2-year and the 7-day, 10-year low flows; and the August median flow for ungaged sites in Massachusetts. Streamflow statistics and basin characteristics for 87 to 133 streamgaging stations and low-flow partial-record stations were used to develop the equations. The streamgaging stations had from 2 to 81 years of record, with a mean record length of 37 years. The low-flow partial-record stations had from 8 to 36 streamflow measurements, with a median of 14 measurements. All basin characteristics were determined from digital map data. The basin characteristics that were statistically significant in most of the final regression equations were drainage area, the area of stratified-drift deposits per unit of stream length plus 0.1, mean basin slope, and an indicator variable that was 0 in the eastern region and 1 in the western region of Massachusetts. The equations were developed by use of weighted-least-squares regression analyses, with weights assigned proportional to the years of record and inversely proportional to the variances of the streamflow statistics for the stations. Standard errors of prediction ranged from 70.7 to 17.5 percent for the equations to predict the 7-day, 10-year low flow and 50-percent duration flow, respectively. The equations are not applicable for use in the Southeast Coastal region of the State, or where basin characteristics for the selected ungaged site are outside the ranges of those for the stations used in the regression analyses. A World Wide Web application was developed that provides streamflow statistics for data collection stations from a data base and for ungaged sites by measuring the necessary basin characteristics for the site and solving the regression equations. Output provided by the Web application for ungaged sites includes a map of the drainage-basin boundary determined for the site, the measured basin characteristics, the estimated streamflow statistics, and 90-percent prediction intervals for the estimates. An equation is provided for combining regression and correlation estimates to obtain improved estimates of the streamflow statistics for low-flow partial-record stations. An equation is also provided for combining regression and drainage-area ratio estimates to obtain improved e

Massachusetts↗

Deep-sea sedimentary record of the late Wisconsin cataclysmic floods from the Columbia River

New results from Ocean Drilling Program Site 1037 and U.S. Geological Survey high-resolution seismic-reflection profiles confirm the great thickness, fast deposition rate, distant source, and convolute path of turbidites that fill the Escanaba Trough, the rift valley of the southernmost segment of the Gorda Ridge. Accelerator mass spectrometry 14 C measurements provide the first direct dating of the Escanaba Trough turbidites, demonstrating an average deposition rate faster than 10 m/k.y. between 32 and 11 ka and as fast as 15 m/k.y. during the oxygen isotope stage 2 lowstand. In the upper 60 m of sediment, the petrology of turbidite sand beds, which are as much as 12 m thick, show that the dominant source for the turbidites is from the Columbia River, which is more than 800 km to the north, rather than from the much closer rivers of northern California. New high-resolution seismic-reflection profiles show that, except for areas of very recent volcanism, the entire Escanaba Trough below 3200 m water depth is floored by the turbidite sequence that was cored in the upper 60 m at Site 1037B. The ages of the upper 120 m of turbidites correspond with the ages of channeled scabland deposits associated with latest Quaternary jokulhlaups from glacial Lake Missoula. The age and source characteristics suggest that these megaturbidite beds in Escanaba Trough are most likely deposits formed by hyperpycnally generated turbidity currents as the largest of the Lake Missoula floods entered the sea.

Geology↗

The Alaska Mineral Resource Assessment Program: Guide to information about the geology and mineral resources of the Ketchikan and Prince Rupert quadrangles, southeastern Alaska

The Ketchikan and Prince Rupert 1-degree by 2-degree quadrangles, which encompass about 16,000 km2 at the south tip of southeastern Alaska, have been investigated by integrated field and laboratory studies in the disciplines of geology, geochemistry, geophysics, and Landsat data interpretation to determine their mineral-resource potential. Mineral deposits in the study area have been mined or prospected intermittently since about 1900, and production of small tonnages of ores containing gold, silver, copper, lead, zinc, and tungsten has been recorded. Extensive exploration and development currently (1981) is underway at a molybdenum prospect about 65 km east of Ketchikan. Our mineral-resource assessment indicates that the area contains potentially significant amounts of those metallic commodities, as well as of molybdenum, iron, antimony, and barite. The results of these studies have been published in a folio of maps accompanied by descriptive texts, diagrams, tables, and pertinent references. The present report serves as a guide to these investigations, provides relevant background information, and integrates the component maps and reports. It also describes revisions to the geology based on studies completed since the folio was published and includes a list of specific and general references on the geology and mineral deposits of the study area.

Alaska↗

Paleohydrology and paleochemistry of Lake Manitoba, Canada: the isotope and ostracode records

Lake Manitoba, the largest lake in the Prairie region of North America, contains a fine-grained sequence of late Pleistocene and Holocene sediment that documents a complex postglacial history. This record indicates that differential isostatic rebound and changing climate have interacted with varying drainage basin size and hydrologic budget to create significant variations in lake level and limnological conditions. During the initial depositional period in the basin, the Lake Agassiz phase (???12-9 ka), ??18O of ostracodes ranged from -16??? to -5??? (PDB), implying the lake was variously dominated by cold, dilute glacial meltwater and warm to cold, slightly saline water. Candona subtriangulata, which prefers cold, dilute water, dominates the most negative ??18O intervals, when the basin was part of proglacial Lake Agassiz. At times during this early phase, the ??18O of the lake abruptly shifted to higher values; euryhaline taxa such as C. rawsoni or Limnocythere ceriotuberosa, and halobiont taxa such as L. staplini or L. sappaensis are dominant in these intervals. This positive covariance of isotope and ostracode records implies that the lake level episodically fell, isolating the Lake Manitoba basin from the main glacial lake. ??18O values from inorganic endogenic Mg-calcite in the post-Agassiz phase of Lake Manitoba trend from -4??? at 8 ka to -11??? at 4.5 ka. We interpret that this trend indicates a gradually increasing influence of isotopically low (-20??? SMOW) Paleozoic groundwater inflow, although periods of increased evaporation during this time may account for zones of less negative isotopic values. The ??18O of this inorganic calcite abruptly shifts to higher values (-6???) after ???4.5 ka due to the combined effects of increased evaporative enrichment in a closed basin lake and the increased contribution of isotopically high surface water inflow on the hydrologic budget. After ???2 ka, the ??18O of the Mg-calcite fluctuates between -13??? and -7???, implying short-term variability in the lake's hydrologic budget, with values indicating the lake varied from outflow-dominated to evaporation-dominated. The ??13C values of Mg-calcite remain nearly constant from 8 to 4.5 ka and then trend to higher values upward in the section. This pattern suggests primary productivity in the lake was initially constant but gradually increased after 4.5 ka. ?? 1994 Kluwer Academic Publishers.

Journal of Paleolimnology↗

Geology of possible petroleum provinces in Alaska

The history of petroleum exploration in Alaska and the geology of possible petroleum provinces in Alaska are reviewed. Maps showing Alaska's major Mesozoic and Tertiary tectonic elements, possible petroleum provinces, and indications of petrol, are included in this report. Annotated references in Geological Survey publications relating to petroleum and oil shale in Alaska are given at the end of the report. For the purpose of appraising its petroleum possibilities, Alaska is divided into the southern, central, and northern major geologic-physiographic regions. Southern Alaska includes the arcuate mountain chain formed by the Alaska and Aleutian Ranges and the Mentasta- Nutzotin Mountains, the coastal range and valley area to the south, and the southeastern Alaska "panhandle" -- an area of 185,000 square miles. Oil seeps on the west shore of Cook Inlet in southern Alaska were known as early as 1853, and claims were staked in this region in 1882. Drilling began near the oil seeps in the Katalla district about 1901, and this started Alaska's first period of oil activity. From 1902 to 1933 the Katalla field produced 154,000 barrels of oil from fractured shale and sandstone of Tertiary age the- first and only commercial production in Alaska. On the basis of geology, surficial indications of petroleum, and test wells drilled, six possible petroleum provinces are indicated in southern Alaska. They are Heceta Island area, Keku Islands area, Cook Inlet Mesozoic province, Gulf of Alaska Tertiary province, Cook Inlet Tertiary province, and Copper River basin. The exposed rocks in the Heceta Island area include lower Paleozoic graywacke-type sandstone, sandstone, conglomerate, and massive limestones with reeflike structures; igneous rocks are rare or lacking in much of the area. The Kosciusko-Tuxekan-Heceta synclinorium, the main structural feature, is modified by minor folds and faults. Some of the minor folds are reported to be broad and open, with flanks dipping 20°-145°. As far as known, the Heceta Island area has not heretofore been seriously considered as a possible petroleum province. Rocks of Silurian to Cretaceous age are exposed in the Keku Island area and include moderately folded and relatively unaltered limestone and other marine sedimentary rocks. The Cook Inlet Mesozoic province, a land area of approximately 18,500 square miles, includes a great thickness of unmetamorphosed marine sedimentary rocks of Jurassic and Cretaceous age. At least 23 test wells were drilled or started in this province by the end of 1955. Shows of oil and gas were encountered in many of these wells. During 1955 at least ten oil companies were active in this area and by the end of 1955 about 1 1/2 million acres were included in oil and gas leases applied for or granted. The Gulf of Alaska Tertiary province includes about 5,200 square miles in which rocks of Tertiary age are exposed or are believed to underlie Quaternary deposits. Between 1901 and the end of 1955 about 47 wells were drilled or started in this province. The Cook Inlet Tertiary province embraces an area of about 9,500 square miles, of which about 4,100 is covered by the shallow waters of Cook Inlet. Petroleum exploration has been in that part of the area which overlaps the Cook Inlet Mesozoic province. Eocene or younger Tertiary nonmarine sedimentary rocks are believed to underlie much of the province, and marine rocks of Tertiary age may also be present. The Copper River basin is a topographic basin underlain by unconsolidated deposits of Quaternary age. Tertiary rocks favorable for the accumulation of petroleum may underlie part of the basin but this is not believed likely. Except for some leasing activity no petroleum exploration has been recorded in the Copper River Basin to the end of 1955. Central Alaska is a region of about 275,000 square miles and consists of an irregular assemblage of intricately dissected uplands and alluvium-floored lowland basins. Scattered peaks of resistant intrusive igneous rocks surmount most of the upland areas. In the vast region of central Alaska only six test wells are known to have been drilled for the purpose of finding oil and gas. The maximum depth reached was 350 feet and the holes were mostly or entirely in Quaternary deposits. In recent years several oil companies have investigated some parts of the region and large areas in the Yukon-Koyukuk province are now under lease. Oil seeps, gas seeps, and other indications of petroleum have been reported from many localities; samples from two localities have been analyzed and reported to be petroleum. The geology of central Alaska is similar in a general way to that of the area between the Rocky Mountains and Sierra-Cascade belts of the United States. Sedimentary rocks, probably equivalent to the Precambrian Belt series, and rocks of the Cambrian and all younger geologic systems have been recognized in central Alaska. The structure of the region is known to be complex, but except in local mineral districts, it has not been mapped in detail. Based on the limited amount of available information, the region cannot be regarded as distinctly favorable for significant accumulations of petroleum. However, three pre-Cenozoic provinces, the Yukon-Koyukuk, the Kobuk, and the Kandik, and several large Cenozoic basin provinces may be worthy of further investigation. Northern Alaska includes the Brooks Range and all the treeless tundra north to the Arctic Coast, an area of about 125,000 square miles. The presence of oil seeps along the Arctic Coast has been known at least since 1900 and a description of the Cape Simpson oil seeps vas published in 1909. Since then oil and gas seeps have been described from nine localities, and oil shales and oil-bearing sandstones are known from many localities in the Arctic Foothills province. Oil and gas deposits have been discovered and geologic conditions are favorable for oil and gas accumulations in approximately half of the region. In 1923 approximately 37,000 square miles in northern Alaska was reserved by Executive order as Naval Petroleum Reserve No. 4. In 1944 the U. S. Navy began a vast petroleum exploration program which was suspended in 1953. In the years 1945 through 1955, 37 test wells and 45 core tests were drilled on 18 structures. Three oil fields, Umiat, Simpson, and Fish Creek, and two gas fields, South Barrow and Gubik, were discovered. Total reserve estimates for all discoveries of oil to 1955 range from 30 to 100 million barrels, and for gas, from 370 billion to 900 billion cubic feet. All northern Alaska, with the exception of the Brooks Range, can be considered a possible petroleum province, but the region can be subdivided into provinces of somewhat different potentialities. These subdivisions roughly correspond with the geomorphic provinces and sections, which in turn reflect differences in geology. The known oil-bearing beds are of Mesozoic age, primarily Cretaceous, and thus the possible petroleum provinces could be designated as Mesozoic. However, Paleozoic and Cenozoic rocks with favorable reservoir characteristics are exposed in the region and possibly underlie, in favorable structural situations, some of the areas as yet not tested. The Arctic Coastal Plain province includes gently folded and flat-lying Mesozoic beds that overlie a basement complex of Paleozoic and early Mesozoic age. Near the southern edge of this province the basement rocks are at depths of at least 20,000 feet, and to the north these rocks rise to within 2,500 feet of the surface. The Teshukpuk Lake section of the Arctic Coastal plain includes many of the known oil seeps; it is the most accessible to sea transportation, and lies almost completely within NPR 4. Thirteen test wells and 35 core tests have been drilled here; one gas field and two (at present, noncommercial) oil fields have been discovered. The possibility of further discoveries may depend largely on locating porous sandstones in stratigraphic rather than anticlinal traps. The White Hills section is distinguished topographically from the Teshukpruk section by its white-gravel-covered hills and fever lakes, and geologically by the presence of Tertiary rocks, including 2,000 feet of nonmarine beds in the west and at least 7,000 feet of marine beds to the east, in the vicinity of Carter Creek. This section appears to be more complex structurally. No test wells have been drilled in the White Hills section. The Northern Foothills section includes many closed anticlines. Twenty-four test wells and ten core tests have been drilled on 11 structures and two discoveries have been made -the Umiat oil field and the Gubik gas field. All these tests have been drilled in Cretaceous rocks. The Southern Foothills section is structurally similar to the Alberta Foothills and to the northern part of the Brooks Range. Great thicknesses of marine shale of Lover Cretaceous, Jurassic, and Triassic age are exposed. The outcropping Mesozoic sandstones are generally poorly sorted, nonporous, and impermeable. To the south the section is bordered by mountainous exposures of Mississippian limestone, which probably underlie at least part of this section. The rocks that underlie the deeply eroded complex structures of the Brooks Range include schist, slate, argillite, and limestone. Some exposed limestones have a strong petroleum-like odor and contain traces of petroleum residues.

Alaska↗

Floods in the Skagit River basin, Washington

According to Indian tradition, floods of unusually great magnitude harassed the Skagit River basin about 1815 and 1856. The heights of these floods were not recorded at the time; so they are called historical floods. Since the arrival of white men about 1863, a number of large and damaging floods have been witnessed and recorded. Data concerning and verifying the early floods, including those of 1815 and 1856, were collected prior to 1923 by James E. Stewart. He talked with many of the early settlers in the valley who had listened to Indians tell about the terrible floods. Some of these settlers had referenced the maximum stages of floods they had witnessed by cutting notches at or measuring to high-water marks on trees. In order to verify flood stages Stewart spent many weeks finding and levelling to high-water marks such as drift deposits, sand layers in coves, and silt in the bark of certain types of trees. Gaging stations have been in operation at various locations on the Skagit River and its tributaries since 1909, so recorded peak stages are available at certain sites for floods occurring since that date. All peak discharge data available for both historical and recorded floods have been listed in this report. The types of floods as to winter and summer, the duration of peaks, and the effect of reservoirs are discussed. In 1899 Sterling Dam was constructed at the head of Gages Slough near Sedro Woolley. This was the beginning of major diking in the lower reaches of the Skagit River. Maps included in the report show the location of most of the dike failures that have occurred during the last 73 years and the area probably inundated by major floods. The damage resulting from certain floods is briefly discussed. The report is concluded with a brief discussion of the U.S. Geological Survey method of computing flood-frequency curves as applied to the Skagit River basin. The treatment of single-station records and a means of combining these records for expressing regional significance are exemplified. Historical data are used in the development of both the single-station and the regional curves.

Washington↗

Geomorphic map of western Whatcom County, Washington

Western Whatcom County has a rich history of glaciation, sea-level change, fluvial erosion and deposition, landsliding, nearby volcanic activity, and human landscape modification. This lidar-derived geomorphic map interprets this history from the form and position of the Earth’s surface. The geomorphic record is broken into nine phases, beginning with the peak of the Vashon stade of the Fraser glaciation of Armstrong and others (1965) (phase 1), shortly after 16,000 years ago. The Cordilleran ice sheet was ≥1.6 km thick in the Bellingham area. Glacial lineations on high ground demonstrate that ice flow was from north to south. Storage of water in ice sheets at this time resulted in global sea level ~120 m lower than at present. The weight of the ice sheet depressed the land so that local relative sea level was at least 150 m higher than at present. As the ice sheet melted and thinned, it floated, broke up, and was replaced by salt water. The margin of the ice sheet—or at least its grounding line—retreated to the northeast of the map area during or before phase 2. Marine deposition, currents, and waves smoothed earlier-formed surfaces in the western part of the map area. Global sea level rose (because of melting of continental ice sheets), but the Fraser Lowland rose even faster (due to glacio-isostatic rebound following the loss of ice-sheet load), and thus local relative sea level fell. The Cordilleran ice sheet readvanced during the Sumas stade of Armstrong and others (1965). Oldest Sumas moraines formed when relative sea level at Bellingham was ~55 m (phase 3). Younger moraines formed when relative sea level at Bellingham was ~25 m (phase 4). The amount of Sumas ice retreat and readvance between these times is unknown. Younger Sumas events are marked by local moraines, progressive isostatic rebound and lowering of relative sea level, and changes in the flow of ice-marginal water. During phase 5, the southeast margin of the ice sheet advanced, perhaps because capture of ice-marginal drainage by the Samish River (east and south of the map area) meant the ice sheet was no longer trimmed by high-discharge flow along Squalicum channel. Farther west and north, the ice margin retreated between phases 4 and 5. Phases 6 through 9 may mark stillstands during further ice retreat. There were glacial outburst floods (jökulhlaups) during phases 7 and 8, and perhaps during phase 5. When Sumas ice left the area, perhaps about 11,500 years ago, the Nooksack River appears to have discharged northeast through Sumas Valley to the Fraser River. Details of the switch to its modern course are speculative, but archaeological and sediment-supply arguments suggest that the modern Nooksack River delta south of Ferndale formed within the past 5,000 years. The foothills of the North Cascades are decorated with abundant post-glacial deep-seated landslides. Anomalously high late Holocene beaches are found at Birch Bay, Neptune Beach, perhaps at Maple Beach on the east side of Point Roberts, and perhaps at the northwest corner of the Lummi Peninsula. These beaches may have been uplifted by earthquakes that did not rupture the surface. The low-relief landscape shaped by the Cordilleran ice sheet, along with fluvial infilling of low areas, resulted in abundant wetland, at least 70 percent of which has been diked and (or) drained to control flooding and facilitate farming.

Washington↗

Fossil and active fumaroles in the 1912 eruptive deposits, Valley of ten thousand smokes, Alaska

Fumaroles in the ash-flow sheet emplaced during the 1912 eruption of Novarupta were intensely active throughout the Valley of Ten Thousand Smokes (VTTS) when first studied in 1917. Fumarole temperatures recorded in 1919 were as hot as 645??C. Influx of surface waters into the hot ash-flow sheet provided the fluid flow to sustain the fumaroles but also enhanced cooling so that by the mid-1930's vigorous activity survived only in the vent region. Configuration and distribution of high-temperature fissure fumaroles tens of meters long, that are prevalent in the middle and upper VTTS, were controlled largely by sintering and degree of welding, which in turn controlled fracturing and permeability of the ash-flow tuff. One fracture type developed parallel to the enclosing valley walls during compaction of the ash-flow sheet. Another type extends across the VTTS nearly perpendicular to the flow direction. A third type of randomly oriented fractures developed as cooling contraction cracks during vapor-phase devitrification. In distal parts of the ash-flow sheet where the tuff is nonwelded, prominent fumaroles have irregular funnel-shaped morphologies. Fumarole distribution in the nonwelded part of the ash-flow sheet is concentrated above pre-emplacement river channels. The hottest, longest-lived fumaroles occurred in the upper VTTS near the 1912 vent where the ash-flow sheet is thicker, more indurated, and on average more mafic (richer in dacite and andesite) in contrast to the thinner, nonwelded rhyolitic tuff in the distal part of the sheet. Fumarolic activity was less intense in the distal part of the tuff because of lower emplacement temperatures, more diffuse fumarole conduits in the nonwelded tuff, and the thinness of the ash-flow sheet. Chemical leaching of ash-flow tuff by hot rising fluids took place adjacent to fumarolic conduits in deep parts of the fumaroles. Deposition of incrustation minerals, the components of which were carried upward by fumarolic gases, took place in the upper part of the ejecta, mostly in the fallout layers. The permeability difference between the ash-flow tuff and the overlying coarse dacite fallout was a critical factor in promoting the abrupt gradients in temperature, pressure, and fO2 that resulted in deposition of minerals from the fumarolic gases. The permeability difference between nonwelded ash-flow tuff and overlying fine-grained fall layers in the lower VTTS is less pronounced. The total mass of fumarolically deposited minerals appears large at first glance owing to the conspicuous coloration by Fe minerals; the mass is appreciably less than is apparent, however, because most incrustations are composed largely of ejecta coated or cemented by fine-grained fumarolic minerals. A large mass of unstable incrustation minerals, mainly chlorides and sulfates, reported during the 1917-1919 studies have since been removed by dissolution and weathering. In the vent region, argillic alteration that followed high-temperature degassing is localized along arcuate subsidence fractures in fallback ejecta. At widely scattered residual orifices, fumarolic gases presently are near-neutral steam, and temperatures are as hot as 90??C. ?? 1991.

Journal of Volcanology and Geothermal Research↗

Sandstone distribution patterns in the Pocahontas Formation of southwest Virginia and southern West Virginia

The Pocahontas Formation is a clastic wedge of sandstone, siltstone, shale, coal, and underclay that is transitional between underlying marine strata of Mississippian age and overlying continental beds of Pennsylvanian age. It attains a maximum thickness of 750 ft. at the southeastern edge of the Appalachian coal field and thins northwestward by the tonguing out of lower beds and by the truncation of upper beds at an overlying unconformity. Sandstone, which composes about 70 percent of the formation, occurs in lenticular bodies that have two distinct distribution patterns—lobate and linear—of contrasting orientation and composition. The lobate bodies are elongate to the northwest and contain sandstone having a quartz content of about 50 to 65 percent. Within a lobe, thickness lines show a northwestward bifurcating pattern similar to the pattern of channels in an alluvial distributary system of a modern delta. Laterally, lobate bodies merge to form northwestward-thinning sandstone wedges as much as 300 ft. thick. The linear pattern is shown by 3- to 8-mi.-wide sandstone lenses that extend north-northeast for about 45 mi. They are near the distal ends of the lobate sandstone and consist of 0 to 140 ft. of relatively pure quartzose sandstone. The well-washed character and orientation of the linear bodies, normal to the lobate bodies, indicate a barrier-bar origin. These sediment distribution patterns show that the Pocahontas Formation was deposited mainly in deltaic complexes built out from the southeast during marine regression to the northwest. Brief periods of transgression and stable shoreline conditions are recorded by tongues of marine strata and by the barrier bars.

Virginia, West Virginia↗

Deep-Sea Turbidites as Guides to Holocene Earthquake History at the Cascadia Subduction Zone&mdash;Alternative Views for a Seismic-Hazard Workshop

This report reviews the geological basis for some recent estimates of earthquake hazards in the Cascadia region between southern British Columbia and northern California. The largest earthquakes to which the region is prone are in the range of magnitude 8-9. The source of these great earthquakes is the fault down which the oceanic Juan de Fuca Plate is being subducted or thrust beneath the North American Plate. Geologic evidence for their occurrence includes sedimentary deposits that have been observed in cores from deep-sea channels and fans. Earthquakes can initiate subaqueous slumps or slides that generate turbidity currents and which produce the sedimentary deposits known as turbidites. The hazard estimates reviewed in this report are derived mainly from deep-sea turbidites that have been interpreted as proxy records of great Cascadia earthquakes. The estimates were first published in 2008. Most of the evidence for them is contained in a monograph now in press. We have reviewed a small part of this evidence, chiefly from Cascadia Channel and its tributaries, all of which head offshore the Pacific coast of Washington State. According to the recent estimates, the Cascadia plate boundary ruptured along its full length in 19 or 20 earthquakes of magnitude 9 in the past 10,000 years; its northern third broke during these giant earthquakes only, and southern segments produced at least 20 additional, lesser earthquakes of Holocene age. The turbidite case for full-length ruptures depends on stratigraphic evidence for simultaneous shaking at the heads of multiple submarine canyons. The simultaneity has been inferred primarily from turbidite counts above a stratigraphic datum, sandy beds likened to strong-motion records, and radiocarbon ages adjusted for turbidity-current erosion. In alternatives proposed here, this turbidite evidence for simultaneous shaking is less sensitive to earthquake size and frequency than previously thought. Turbidites far below a channel confluence, instead of representing the merged flows from two tributaries, monitor the dominant tributary only. Sandy beds low in the turbidites, instead of matching from channel to channel, permit divergent stratigraphic correlations; and rather than approximating strong-motion seismograms, the sandy beds more likely record processes internal to the generation and transformation of subaqueous mass movements. The age adjustments, instead of supporting other evidence that all the northern ruptures were long, are uncertain enough to accord with variation in rupture mode, and this variation improves agreement with onshore paleoseismology. Many of the turbidites counted as evidence for frequent earthquakes on the southern Cascadia plate boundary may instead reflect nearness to steep slopes. This report is meant to aid in the updating of national maps of seismic hazards in Canada and the United States. It offers three main conclusions for consideration at a U.S. hazard-map workshop slated for March 21-22, 2012: If giant earthquakes are the norm for the plate boundary offshore southern Washington, the strongest paleoseismic evidence for this rupture mode is the average earthquake-recurrence interval of about 500 years that is evidenced both offshore in lower Cascadia Channel and onshore at estuaries of southern Washington and northernmost Oregon. The plate boundary offshore southern British Columbia and northern Washington may be capable of producing great earthquakes at an average interval as short as 300 years that is evidenced mainly onshore. Review of more of the turbidite evidence now in press may clarify implications for the hazard maps. Further work on the deep-sea turbidites could target sedimentary processes and chronological uncertainties that may affect the turbidites' sensitivity to fault-rupture lengths and recurrence rates.

Washington;Oregon;California↗