Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Topographic Map”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57Linked to original sources
USGS2004

Geologic Map of the Woodland Quadrangle, Clark and Cowlitz Counties, Washington

The Woodland 7.5' quadrangle is situated in the Puget-Willamette Lowland approximately 50 km north of Portland, Oregon (fig. 1). The lowland, which extends from Puget Sound into west-central Oregon, is a complex structural and topographic trough that lies between the Coast Range and the Cascade Range. Since late Eocene time, the Cascade Range has been the locus of an active volcanic arc associated with underthrusting of oceanic lithosphere beneath the North American continent along the Cascadia Subduction Zone. The Coast Range occupies the forearc position within the Cascadia arc-trench system and consists of a complex assemblage of Eocene to Miocene volcanic and marine sedimentary rocks. The Woodland quadrangle lies at the northern edge of the Portland Basin, a roughly 2000-km2 topographic and structural depression that is the northernmost of several sediment-filled structural basins, which collectively constitute the Willamette Valley segment of the Puget-Willamette Lowland (Beeson and others, 1989; Swanson and others, 1993; Yeats and others, 1996). The Portland Basin is approximately 70 km long and 30 km wide; its long dimension is oriented northwest. Its northern boundary coincides, in part, with the lower Lewis River, which flows westward through the center of the quadrangle. The Lewis drains a large area in the southern Washington Cascade Range, including the southern flank of Mount St. Helens approximately 25 km upstream from the quadrangle, and joins the Columbia River about 6 km south of Woodland (fig. 1). Northwest of Woodland, the Columbia River exits the broad floodplain of the Portland Basin and flows northward through a relatively narrow bedrock valley at an elevation near sea level. The flanks of the Portland Basin consist of Eocene through Miocene volcanic and sedimentary rocks that rise to elevations exceeding 2000 ft (610 m). Seismic-reflection profiles (L.M. Liberty, written commun., 2003) and lithologic logs of water wells (Swanson and others, 1993; Mabey and Madin, 1995) indicate that as much as 550 m of late Miocene and younger sediments have accumulated in the deepest part of the basin near Vancouver. Most of this basin-fill material was carried in from the east by the Columbia River but sediment deposited by streams draining the adjacent highlands are locally important. The Portland Basin has been interpreted as a pull-apart basin located in the releasing stepover between two en echelon, northwest-striking, right-lateral fault zones (Beeson and others, 1985, 1989; Beeson and Tolan, 1990; Yelin and Patton, 1991; Blakely and others, 1995). These fault zones are thought to reflect regional transpression and dextral shear within the forearc in response to oblique subduction of the Pacific Plate along the Cascadia Subduction Zone (Pezzopane and Weldon, 1993; Wells and others, 1998). The southwestern margin of the Portland Basin is a well-defined topographic break along the base of the Tualatin Mountains, an asymmetric anticlinal ridge that is bounded on its northeast flank by the Portland Hills Fault Zone (Balsillie and Benson, 1971; Beeson and others, 1989; Blakely and others, 1995), which is probably an active structure (Wong and others, 2001; Liberty and others, 2003). The nature of the corresponding northeastern margin of the basin is less clear, but a poorly defined and partially buried dextral extensional fault zone has been hypothesized from topography, microseismicity, potential field-anomalies, and reconnaissance geologic mapping (Beeson and others, 1989; Beeson and Tolan, 1990; Yelin and Patton, 1991; Blakely and others, 1995). Another dextral structure may control the north-northwest-trending reach of the Columbia River between Portland and Longview (Blakely and others, 1995; Evarts, 2002; Evarts and others, 2002). This map is a contribution to a U.S. Geological Survey program designed to improve the geologic database for the Portland Basin part of the Pacific Northwest urban corridor,

Scientific Investigations Map↗
USGS1952

Topographic instructions, Book 3, multiplex procedure; Chapter 3 C7a-e

By direct projection of overlapping photographs, printed on glass plates, the multiplex produces an exact optical model, in miniature, of the terrain to be mapped. To create the model, the multiplex projectors must be properly positioned and oriented so that they duplicate the orientation of the aerial camera at the instant of each exposure. By means of a floating mark, horizontal and vertical measurements can be made in the model, and planimetry and contours can be drawn. The applicability of the multiplex to a given mapping project depends largely on the contour interval and compilation scale required, and also depends, to a lesser extent, on the vegetation and terrain cover as it may affect accuracy requirements. The steps in multiplex procedure are orientation, stereotriangulation, and compilation of detail. In orientation, the projectors are arranged so that the projected images form a stereoscopic model which can be adjusted to fit horizontal and vertical control points. In stereotriangulation, three or more multiplex projectors are oriented so that the consecutive models fit existing control, permitting the establishment of additional or intermediate control. In compilation, the features appearing in the model are delineated on the map manuscript.

Circular↗
USGS2006

Modeling regional initiation of rainfall-induced shallow landslides in the eastern Umbria Region of central Italy

We model the rainfall-induced initiation of shallow landslides over a broad region using a deterministic approach, the Transient Rainfall Infiltration and Grid-based Slope-stability (TRIGRS) model that couples an infinite-slope stability analysis with a one-dimensional analytical solution for transient pore pressure response to rainfall infiltration. This model permits the evaluation of regional shallow landslide susceptibility in a Geographic Information System framework, and we use it to analyze susceptibility to shallow landslides in an area in the eastern Umbria Region of central Italy. As shown on a landslide inventory map produced by the Italian National Research Council, the area has been affected in the past by shallow landslides, many of which have transformed into debris flows. Input data for the TRIGRS model include time-varying rainfall, topographic slope, colluvial thickness, initial water table depth, and material strength and hydraulic properties. Because of a paucity of input data, we focus on parametric analyses to calibrate and test the model and show the effect of variation in material properties and initial water table conditions on the distribution of simulated instability in the study area in response to realistic rainfall. Comparing the results with the shallow landslide inventory map, we find more than 80% agreement between predicted shallow landslide susceptibility and the inventory, despite the paucity of input data.

Landslides↗
USGS2010

Database for the geologic map of the Bend 30- x 60-minute quadrangle, central Oregon

The Bend 30- x 60-minute quadrangle has been the locus of volcanism, faulting, and sedimentation for the past 35 million years. It encompasses parts of the Cascade Range and Blue Mountain geomorphic provinces, stretching from snowclad Quaternary stratovolcanoes on the west to bare rocky hills and sparsely forested juniper plains on the east. The Deschutes River and its large tributaries, the Metolius and Crooked Rivers, drain the area. Topographic relief ranges from 3,157 m (10,358 ft) at the top of South Sister to 590 m (1,940 ft) at the floor of the Deschutes and Crooked Rivers where they exit the area at the north-central edge of the map area. The map encompasses a part of rapidly growing Deschutes County. The city of Bend, which has over 70,000 people living in its urban growth boundary, lies at the south-central edge of the map. Redmond, Sisters, and a few smaller villages lie scattered along the major transportation routes of U.S. Highways 97 and 20. This geologic map depicts the geologic setting as a basis for structural and stratigraphic analysis of the Deschutes basin, a major hydrologic discharge area on the east flank of the Cascade Range. The map also provides a framework for studying potentially active faults of the Sisters fault zone, which trends northwest across the map area from Bend to beyond Sisters. This digital release contains all of the information used to produce the geologic map published as U.S. Geological Survey Geologic Investigations Series I-2683 (Sherrod and others, 2004). The main component of this digital release is a geologic map database prepared using ArcInfo GIS. This release also contains files to view or print the geologic map and accompanying descriptive pamphlet from I-2683.

Oregon↗
USGS2001

Io in the near infrared: Near-Infrared Mapping Spectrometer (NIMS) results from the Galileo flybys in 1999 and 2000

Galileo's Near-Infrared Mapping Spectrometer (NIMS) observed Io during the spacecraft's three flybys in October 1999, November 1999, and February 2000. The observations, which are summarized here, were used to map the detailed thermal structure of active volcanic regions and the surface distribution of SO 2 and to investigate the origin of a yet unidentified compound showing an absorption feature at ∼1 μm. We present a summary of the observations and results, focusing on the distribution of thermal emission and of SO 2 deposits. We find high eruption temperatures, consistent with ultramafic volcanism, at Pele. Such temperatures may be present at other hot spots, but the hottest areas may be too small for those temperatures to be detected at the spatial resolution of our observations. Loki is the site of frequent eruptions, and the low thermal emission may represent lavas cooling on the caldera's surface or the cooling crust of a lava lake. High-resolution spectral observations of Emakong caldera show thermal emission and SO 2 within the same pixels, implying that patches of SO 2 frost and patches of cooling lavas or sulfur flows are present within a few kilometers from one another. Thermal maps of Prometheus and Amirani show that these two hot spots are characterized by long lava flows. The thermal profiles of flows at both locations are consistent with insulated flows, with the Amirani flow field having more breakouts of fresh lava along its length. Prometheus and Amirani each show a white ring at visible wavelengths, while SO 2 distribution maps show that the highest concentration of SO 2 in both ring deposits lies outside the white portion. Visible measurements at high phase angles show that the white deposit around Prometheus extends into the SO 2 ring. This suggests that the deposits are thin and that compositional or grain size variations may occur in the radial direction. SO 2 mapping of the Chaac region shows that the interior of a caldera adjacent to Chaac has almost pure SO 2 . The deposit appears to be topographically controlled, suggesting a possible origin by liquid flow.

Journal of Geophysical Research E: Planets↗
USGS2017

An updated geospatial liquefaction model for global application

We present an updated geospatial approach to estimation of earthquake-induced liquefaction from globally available geospatial proxies. Our previous iteration of the geospatial liquefaction model was based on mapped liquefaction surface effects from four earthquakes in Christchurch, New Zealand, and Kobe, Japan, paired with geospatial explanatory variables including slope-derived VS30, compound topographic index, and magnitude-adjusted peak ground acceleration from ShakeMap. The updated geospatial liquefaction model presented herein improves the performance and the generality of the model. The updates include (1) expanding the liquefaction database to 27 earthquake events across 6 countries, (2) addressing the sampling of nonliquefaction for incomplete liquefaction inventories, (3) testing interaction effects between explanatory variables, and (4) overall improving model performance. While we test 14 geospatial proxies for soil density and soil saturation, the most promising geospatial parameters are slope-derived VS30, modeled water table depth, distance to coast, distance to river, distance to closest water body, and precipitation. We found that peak ground velocity (PGV) performs better than peak ground acceleration (PGA) as the shaking intensity parameter. We present two models which offer improved performance over prior models. We evaluate model performance using the area under the curve under the Receiver Operating Characteristic (ROC) curve (AUC) and the Brier score. The best-performing model in a coastal setting uses distance to coast but is problematic for regions away from the coast. The second best model, using PGV, VS30, water table depth, distance to closest water body, and precipitation, performs better in noncoastal regions and thus is the model we recommend for global implementation.

Christchurch, Kobe↗
USGS2008

Modeling Water-Surface Elevations and Virtual Shorelines for the Colorado River in Grand Canyon, Arizona

Using widely-available software intended for modeling rivers, a new one-dimensional hydraulic model was developed for the Colorado River through Grand Canyon from Lees Ferry to Diamond Creek. Solving one-dimensional equations of energy and continuity, the model predicts stage for a known steady-state discharge at specific locations, or cross sections, along the river corridor. This model uses 2,680 cross sections built with high-resolution digital topography of ground locations away from the river flowing at a discharge of 227 m3/s; synthetic bathymetry was created for topography submerged below the 227 m3/s water surface. The synthetic bathymetry was created by adjusting the water depth at each cross section up or down until the model?s predicted water-surface elevation closely matched a known water surface. This approach is unorthodox and offers a technique to construct one-dimensional hydraulic models of bedrock-controlled rivers where bathymetric data have not been collected. An analysis of this modeling approach shows that while effective in enabling a useful model, the synthetic bathymetry can differ from the actual bathymetry. The known water-surface profile was measured using elevation data collected in 2000 and 2002, and the model can simulate discharges up to 5,900 m3/s. In addition to the hydraulic model, GIS-based techniques were used to estimate virtual shorelines and construct inundation maps. The error of the hydraulic model in predicting stage is within 0.4 m for discharges less than 1,300 m3/s. Between 1,300-2,500 m3/s, the model accuracy is about 1.0 m, and for discharges between 2,500-5,900 m3/s, the model accuracy is on the order of 1.5 m. In the absence of large floods on the flow-regulated Colorado River in Grand Canyon, the new hydraulic model and the accompanying inundation maps are a useful resource for researchers interested in water depths, shorelines, and stage-discharge curves for flows within the river corridor with 2002 topographic conditions.

Arizona↗
USGS1979

Atlas of Mars: the 1:5,000,000 map series

This atlas comprises small-scale maps and photomosaics covering the entire surface of the planet Mars. The cartographic contents are reduced-scale versions of the 1:5,000,000 topographic series of 30 quadrangles compiled by the U.S. Geological Survey in cooperation with the National Aeronautics and Space Administration (NASA).

NASA SP↗
USGS2022

Geologic map of the Mount Blue Sky (formerly Mount Evans) quadrangle, Clear Creek and Park Counties, Colorado

The Mount Blue Sky (formerly Mount Evans) 7.5’ quadrangle lies in Park and Clear Creek counties, Colorado, about 60 km west of Denver. The highest elevation in the quadrangle is 14,265 ft (4,348 m) at the top of Mount Blue Sky. The lowest is at about 9,200 ft (2,804 m) on Guanella Pass Road at the southern edge of the quadrangle. Bedrock directly underlies most of the map area, with surficial deposits primarily in the valleys. The geology of the quadrangle was previously mapped at 1:100,000 scale as part of a regional compilation by Kellogg and others (2008). The oldest rocks in the Mount Blue Sky 7.5-minute quadrangle are Paleoproterozoic metasedimentary rocks, and mafic to felsic metaigneous rocks (all units starting with ‘X’ on Plate 1). These rocks were metamorphosed under upper amphibolite facies conditions and intruded by Mesoproterozoic felsic igneous rocks of the ~1442 Ma Mount Blue Sky (YgR, Yt, Ygdm, Ymgm and ~1424 Ma Silver Plume (Yg) batholiths (Spurr and others, 1908; Tweto, 1897; Aleinikoff and others, 1993; du Bray and others, 2018) and, in the southern part of the quadrangle, by rocks that may also be part of the Mount Blue Sky batholith, but may alternatively interpreted as part of the ~1115 Ma to ~1066 Ma Pikes Peak batholith (Unruh and others, 1995; Guitreau and others, 2016). Four generations of folds affected the area. The oldest, F1 folds are isoclinal of various orientations, but primarily northerly-plunging in the southern part of the quadrangle (Mahatma, 2019; Mahatma and others, 2022). In the northern part of the quadrangle (Powell, 2020), open to close F2 chevron folds exist with various orientations. F3 folds in the northern part of the quadrangle are open to close with upright axial planes and plunges to the north and south, and in the southern part of the quadrangle they are open centimeter- to meter- scale northerly-plunging folds, possibly overprinted by another generation of northerly-plunging folds based on orientations of axial planes (F2 and F3 of Mahatma and others, 2022). F4 folds throughout the quadrangle are open to gentle with upright axial planes and shallow plunges to the east and west. The Mount Blue Sky batholith displays a pervasive moderately NW-dipping biotite-hornblende foliation (Fig. 1) in addition to a flow foliation near the margins, indicating NW-directed shortening after ~1442 Ma (Powell, 2020). The relationship between this foliation and the folds is not clear. Various joint sets are present in the area. The most pervasive joint set strikes 355°-020° and is subvertical. It is best developed in the western to southwestern part of the map area, and may be related to late Cenozoic extension associated with the Rio Grande Rift. Joint orientations are generally consistent with the trends of topographical lineaments. Surficial deposits include two series of glacial till deposits (Qtb and Qtp), and outwash (Qgp) deposits. They correlate with the Bull Lake (170-120 ka) and Pinedale (30-12 ka) glacial periods (Dahms, 2004) based on original depositional morphology, geomorphic and topographic position, deposit weathering and pedogenic properties. Possible older glacial deposits (Qti) have been observed along topographically higher surfaces.

Colorado↗
USGS2011

Hillslope chemical weathering across Paraná, Brazil: a data mining-GIS hybrid approach

Self-organizing map (SOM) and geographic information system (GIS) models were used to investigate the nonlinear relationships associated with geochemical weathering processes at local (~100 km 2 ) and regional (~50,000 km 2 ) scales. The data set consisted of 1) 22 B-horizon soil variables: P, C, pH, Al, total acidity, Ca, Mg, K, total cation exchange capacity, sum of exchangeable bases, base saturation, Cu, Zn, Fe, B, S, Mn, gammaspectrometry (total count, potassium, thorium, and uranium) and magnetic susceptibility measures; and 2) six topographic variables: elevation, slope, aspect, hydrological accumulated flux, horizontal curvature and vertical curvature. It is characterized at 304 locations from a quasi-regular grid spaced about 24 km across the state of Paraná. This data base was split into two subsets: one for analysis and modeling (274 samples) and the other for validation (30 samples) purposes. The self-organizing map and clustering methods were used to identify and classify the relations among solid-phase chemical element concentrations and GIS derived topographic models. The correlation between elevation and k-means clusters related the relative position inside hydrologic macro basins, which was interpreted as an expression of the weathering process reaching a steady-state condition at the regional scale. Locally, the chemical element concentrations were related to the vertical curvature representing concave–convex hillslope features, where concave hillslopes with convergent flux tends to be a reducing environment and convex hillslopes with divergent flux, oxidizing environments. Stochastic cross validation demonstrated that the SOM produced unbiased classifications and quantified the relative amount of uncertainty in predictions. This work strengthens the hypothesis that, at B-horizon steady-state conditions, the terrain morphometry were linked with the soil geochemical weathering in a two-way dependent process: the topographic relief was a factor on environmental geochemistry while chemical weathering was for terrain feature delineation.

Parana↗
USGS2011

Lidar vegetation mapping in national parks: Gulf Coast Network

Airborne lidar (Light Detection and Ranging) is an active remote sensing technique used to collect accurate elevation data over large areas. Lidar provides an extremely high level of regional topographic detail, which makes this technology an essential component of U.S. Geological Survey (USGS) science strategy. The USGS Coastal and Marine Geology Program (CMGP) has collaborated with the National Aeronautics and Space Administration (NASA) and the National Park Service (NPS) to acquire dense topographic lidar data in a variety of coastal environments.

Louisiana↗
USGS2004

Geologic Map of the Saint Helens Quadrangle, Columbia County, Oregon, and Clark and Cowlitz Counties, Washington

The Saint Helens 7.5' quadrangle is situated in the Puget-Willamette Lowland approximately 35 km north Portland, Oregon. The lowland, which extends from Puget Sound into west-central Oregon, is a complex structural and topographic trough that lies between the Coast Range and the Cascade Range. Since late Eocene time, Cascade Range has been the locus of a discontinuously active volcanic arc associated with underthrusting of oceanic lithosphere beneath the North American continent along the Cascadia Subduction Zone. The Coast Range occupies the forearc position within the Cascadia arc-trench system and consists of a complex assemblage of Eocene to Miocene volcanic and marine sedimentary rocks. The Saint Helens quadrangle lies in the northern part of the Portland Basin, a roughly 2000-km2 topographic and structural depression. It is the northernmost of several sediment-filled structural basins that collectively constitute the Willamette Valley segment of the Puget-Willamette Lowland (Beeson and others, 1989; Swanson and others, 1993; Yeats and others, 1996). The rhomboidal basin is approximately 70 km long and 30 km wide, with its long dimension oriented northwest. The Columbia River flows west and north through the Portland Basin at an elevation near sea level and exits through a confined bedrock valley less than 2.5 km wide about 16 km north of Saint Helens. The flanks of the basin consist of Eocene through Miocene volcanic and sedimentary rocks that rise to elevations exceeding 2000 ft (610 m). Seismic-reflection profiles (L.M. Liberty, written commun., 2003) and lithologic logs of water wells (Swanson and others, 1993; Mabey and Madin, 1995) indicate that as much as 550 m of late Miocene and younger sediments have accumulated in the deepest part of the basin near Vancouver. Most of this basin-fill material was carried in from the east by the Columbia River but contributions from streams draining the adjacent highlands are locally important. The Portland Basin has been interpreted as a pull-apart basin located in the releasing stepover between two echelon, northwest-striking, right-lateral fault zones (Beeson and others, 1985, 1989; Beeson and Tolan, 1990; Yelin and Patton, 1991; Blakely and others, 1995). These fault zones are thought to reflect regional transpression and dextral shear within the forearc in response to oblique subduction along the Cascadia Subduction Zone Pezzopane and Weldon, 1993; Wells and others, 1998). The southwestern margin of the Portland Basin is a well-defined topographic break along the base of the Tualatin Mountains, an asymmetric anticlinal ridge that is bounded its northeast flank by the Portland Hills Fault Zone (Balsillie and Benson, 1971; Beeson and others, 1989; Blakely and others, 1995), which is probably an active structure (Wong and others, 2001; Liberty and others, 2003). The nature of the corresponding northeastern margin of the basin is less clear, but a poorly defined and partially buried dextral extensional fault zone has been hypothesized from topography, microseismicity, potential fieldanomalies, and reconnaissance geologic mapping (Beeson and others, 1989; Beeson and Tolan, 1990; Yelin and Patton, 1991; Blakely and others, 1995). Another dextral structure, the Kalama Structural Zone of Evarts (2002), may underlie the north-northwest-trending reach of the Columbia River north of Woodland (Blakely and others, 1995). This map is a contribution to a U.S. Geological Survey (USGS) program designed to improve the geologic database for the Portland Basin region of the Pacific Northwest urban corridor, the populated forearc region of western Washington and Oregon. Better and more detailed information on the bedrock and surficial geology of the basin and its surrounding area is needed to refine assessments of seismic risk (Yelin and Patton, 1991; Bott and Wong, 1993), ground-failure hazards (Madin and Wang, 1999; Wegmann and Walsh, 2001) and resource availability in this rapid

Scientific Investigations Map↗
USGS2014

Mapping and monitoring Mount Graham red squirrel habitat with Lidar and Landsat imagery

The Mount Graham red squirrel ( Tamiasciurus hudsonicus grahamensis ) is an endemic subspecies located in the Pinaleño Mountains of southeast Arizona. Living in a conifer forest on a sky-island surrounded by desert, the Mount Graham red squirrel is one of the rarest mammals in North America. Over the last two decades, drought, insect infestations, and fire destroyed much of its habitat. A federal recovery team is working on a plan to recover the squirrel and detailed information is necessary on its habitat requirements and population dynamics. Toward that goal I developed and compared three probabilistic models of Mount Graham red squirrel habitat with a geographic information system and logistic regression. Each model contained the same topographic variables (slope, aspect, elevation), but the Landsat model contained a greenness variable (Normalized Difference Vegetation Index) extracted from Landsat, the Lidar model contained three forest-inventory variables extracted from lidar, while the Hybrid model contained Landsat and lidar variables. The Hybrid model produced the best habitat classification accuracy, followed by the Landsat and Lidar models, respectively. Landsat-derived forest greenness was the best predictor of habitat, followed by topographic (elevation, slope, aspect) and lidar (tree height, canopy bulk density, and live basal area) variables, respectively. The Landsat model's probabilities were significantly correlated with all 12 lidar variables, indicating its utility for habitat mapping. While the Hybrid model produced the best classification results, only the Landsat model was suitable for creating a habitat time series or habitat–population function between 1986 and 2013. The techniques I highlight should prove valuable in the development of Landsat- or lidar-based habitat models range wide.

Arizona↗
USGS2003

Geologic map of the Rusalka Planitia Quadrangle (V-25), Venus

The Rusalka Planitia quadrangle (herein referred to as V-25) occupies an 8.1 million square kilometer swath of lowlands nestled within the eastern highlands of Aphrodite Terra on Venus. The region (25?-0? N., 150?-180? E.) is framed by the crustal plateau Thetis Regio to the southwest, the coronae of the Diana-Dali chasmata complex to the south, and volcanic rise Atla Regio to the west. Regions to the north, and the quadrangle itself, are part of the vast lowlands, which cover four-fifths of the surface of Venus. The often-unspectacular lowlands of Venus are typically lumped together as ridged or regional plains. However, detailed mapping reveals the mode of resurfacing in V-25's lowlands: a mix of corona-related flow fields and local edifice clusters within planitia superimposed on a background of less clearly interpretable extended flow fields, large volcanoes, probable corona fragments, and edifice-flow complexes. The history detailed within the Rusalka Planitia quadrangle is that of the extended evolution of long-wavelength topographic basins in the presence of episodes of extensive corona-related volcanism, pervasive low-intensity small-scale eruptions, and an early phase of regional circumferential shortening centered on central Aphrodite Terra. Structural reactivation both obscures and illuminates the tectonic development of the region. The data are consistent with progressive lithospheric thickening, although the critical lack of an independent temporal marker on Venus severely hampers our ability to test this claim and correlate between localities. Two broad circular basins dominate V-25 geology: northern Rusalka Planitia lies in the southern half of the quadrangle, whereas the smaller Llorona Planitia sits along the northwestern corner of V-25. Similar large topographic basins occur throughout the lowlands of Venus, and gravity data suggest that some basins may represent dynamic topography over mantle downwellings. Both planitiae include coronae and associated lava flows, as well as fields of volcanic shields. Within each basin, the local geologic histories are relatively well constrained; correlations between the planitiae are difficult without making assumptions. The region between the two basins contains large volcanoes, corona fragments, deformation belts, and shield fields embedded within a topographically higher heterogeneous expanse of rolling plains. V-25's most prominent structural grain is a suite of wrinkle ridges that arc around the southwest corner of the quadrangle. A patchy suite of northeast-trending assorted lineaments underlies much of the map area. Although these lineaments originally were narrow fractures, this structural suite appears to have subsequently opened up along extensional troughs near Corpman crater in the southwest corner of the map area and been reactivated as wrinkle ridges at Ran Colles in the middle of the southern boundary of V-25. Nineteen impact craters dot the quadrangle. Craters Yazruk, du Chatelet, and Caccini contribute large geology- obscuring ejecta halos. Crater densities are too low for either relative or absolute age dating. Ten splotches, presumably associated with meteor airbursts, also occur across V-25.

IMAP↗
USGS2008

Flood plain delineation for the Fremont River and Bull Creek, Hanksville, Utah

Predicted inundation maps for the Fremont River and Bull Creek in Hanksville, Utah, were developed using one-dimensional hydraulic models. Estimates of the 1-percent chance (100-year) peak streamflows were determined for the Fremont River and Bull Creek study reaches by using annual peak series data from streamflow-gaging stations and regional peak-flow regression equations. Surveyed topographic data for the study reaches were processed for use in the one-dimensional hydraulic models. The 1-percent chance (100-year) peak streamflows were simulated with hydraulic models to obtain predicted water-surface elevations. Water-surface elevations were then used to map the predicted inundation on a recent aerial photograph. The 1-percent chance (100-year) flood plain for the Fremont River in Hanksville, Utah, included some agricultural lands and did not encroach upon the town. The 1-percent chance (100-year) flood plain on the west side of Bull Creek was found to include a large portion of the town of Hanksville, Utah.

Utah↗
USGS2026

Abandonment of the Upper Devonian Greenland Gap Group and Scherr Formation and revision of the Upper Devonian Brallier and Foreknobs Formations in the central Valley and Ridge Province

This study revises the lithostratigraphic framework of the Upper Devonian interval traditionally assigned to the Greenland Gap Group across the central Appalachian Valley and Ridge Province. The work aims to modernize and standardize lithostratigraphic nomenclature, establish a new reference section and demonstrate how the revised stratigraphy improves edge-matching of 1:24,000 scale geologic maps and supports compilation mapping at scales of 1:100,000 and larger. The revision eliminates the names Greenland Gap Group, Scherr Formation and the Minnehaha Springs Member of the Scherr Formation; reassigns all strata previously designated as Scherr Formation by Dennison (1970) to the upper Brallier Formation; and abandons the basal Mallow Member of the Foreknobs Formation, placing its strata within the upper Brallier as originally defined by Butts (1918). The contact between the Brallier and Foreknobs formations is placed at the base of the first mappable, ridge-forming package of fine- to coarse-grained, cross-bedded, sandstone beds, often containing rounded quartz pebbles with minor interbeds of shale and siltstone. This contact may be gradational in places but, even in absence of good exposure, can usually be distinguished topographically in recently produced lidar-derived imagery as having elevated relief due to the presence of more resistant, compositionally mature coarse-grained sandstone-rich strata. Applying this criterion for mapping the contact between the Brallier and Foreknobs formations has resulted in reconciliation of mismatches of geologic contacts along several 7.5-minute quadrangle boundaries in the states of Virginia, West Virginia, Maryland and Pennsylvania. A new reference section at Baker, West Virginia showcases the contacts between the Harrell Shale, Brallier Formation, Foreknobs Formation and Hampshire Formation. A digital outcrop model of the reference section is provided for future preservation.

Maryland, Pennsylvania, Virginia, West Virginia↗
USGS2006

New maps, new information: Coral reefs of the Florida keys

A highly detailed digitized map depicts 22 benthic habitats in 3140.5 km2 of the Florida Keys National Marine Sanctuary. Dominant are a seagrass/lime-mud zone (map area 27.5%) throughout Hawk Channel and seagrass/carbonate-sand (18.7%) and bare carbonate-sand (17.3%) zones on the outer shelf and in The Quicksands. A lime-mud/seagrass-covered muddy carbonate-sand zone (9.6%) abuts the keys. Hardbottom communities (13.2%) consist of bare Pleistocene coralline and oolitic limestone, coral rubble, and senile coral reefs. Smaller terrestrial (4.0%) and marine habitats, including those of live coral (patch reefs, 0.7%), account for the rest (13.7%) of the area. Derived from aerial photomosaics, the seabed dataset fits precisely when transposed onto a newly developed National Geophysical Data Center hydrographic-bathymetry map. Combined, the maps point to new information on unstudied seabed morphologies, among them an erosional nearshore rock ledge bordering the seaward side of the Florida Keys and thousands of patch-reef clusters aligned in mid-Hawk Channel. Preliminary indications are that the ledge may represent the seaward extent of the 125-ka Key Largo and Miami Limestone that form the keys, and the patch reefs colonized landward edges of two noncoralline, non-dune-ridge topographic troughs. The troughs, their substrate, and inner-shelf location along the seaward side of the Hawk Channel bedrock depression are the first of that type of nuclei to be recognized in the Florida reef record. Together, the map datasets establish the efficacy and accuracy of using aerial photographs to define in extraordinary detail the seabed features and habitats in a shallow-reef setting.

Journal of Coastal Research↗
USGS2008

Interpolation of reconnaissance multibeam and single-beam bathymetry offshore of Milford, Connecticut

This report releases echosounder data from the northern part of the National Oceanic and Atmospheric Administration (NOAA) hydrographic survey H11044 in Long Island Sound, off Milford, Connecticut. The data have been interpolated and regridded into a complete-coverage data set and image of the sea floor. The grid produced as a result of the interpolation is at 10-m resolution. These data extend an already published set of reprocessed bathymetric data from the southern part of survey H11044. In Long Island Sound, the U.S. Geological Survey, in cooperation with NOAA and the Connecticut Department of Environmental Protection, is producing detailed maps of the sea floor. Part of the current phase of research involves studies of sea-floor topography and its effect on the distributions of sedimentary environments and benthic habitats. This data set provides a more continuous perspective of the sea floor than was previously available. It helps to define topographic variability and benthic-habitat diversity for the area and improves our understanding of oceanographic processes controlling the distribution of sediments and benthic habitats. Inasmuch as precise information on environmental setting is important for selecting sampling sites and accurately interpreting point measurements, this data set can also serve as a base map for subsequent sedimentological, geochemical, and biological research.

Connecticut↗