Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Ground Water Modeling Investigation Report”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57Linked to original sources

Simulation of Multiscale Ground-Water Flow in Part of the Northeastern San Joaquin Valley, California

The transport and fate of agricultural chemicals in a variety of environmental settings is being evaluated as part of the U.S. Geological Survey (USGS) National Water-Quality Assessment Program. One of the locations being evaluated is a 2,700-km2 (square kilometer) regional study area in the northeastern San Joaquin Valley surrounding the city of Modesto, an area dominated by irrigated agriculture in a semi-arid climate. Ground water is a key source of water for irrigation and public supply, and exploitation of this resource has altered the natural flow system. The aquifer system is predominantly alluvial, and an unconfined to semiconfined aquifer overlies a confined aquifer in the southwestern part of the study area; these aquifers are separated by the lacustrine Corcoran Clay. A regional-scale 16-layer steady-state model of ground-water flow in the aquifer system in the regional study area was developed to provide boundary conditions for an embedded 110-layer steady-state local-scale model of part of the aquifer system overlying the Corcoran Clay along the Merced River. The purpose of the local-scale model was to develop a better understanding of the aquifer system and to provide a basis for simulation of reactive transport of agricultural chemicals. The heterogeneity of aquifer materials was explicitly incorporated into the regional and local models using information from geologic and drillers? logs of boreholes. Aquifer materials were differentiated in the regional model by the percentage of coarse-grained sediments in a cell, and in the local model by four hydrofacies (sand, silty sand, silt, and clay). The calibrated horizontal hydraulic conductivity values of the coarse-grained materials in the zone above the Corcoran Clay in the regional model and of the sand hydrofacies used in the local model were about equal (30?80 m/d [meter per day]), and the vertical hydraulic conductivity values in the same zone of the regional model (median of 0.012 m/d), which is dominated by the finer-grained materials, were about an order of magnitude less than that for the clay hydrofacies in the local model. Data used for calibrating both models included long-term hourly water-level measurements in 20 short-screened wells installed by the USGS in the Modesto and Merced River areas. Additional calibration data for the regional model included water-level measurements in 11 wells upslope and 17 wells downslope from these areas. The root mean square error was 2.3 m (meter) for all wells in the regional model and 0.8 m for only the USGS wells; the associated average errors were 0.9 m and 0.3 m, respectively. The root mean square error for the 12 USGS wells along a transect in the local model area was 0.08 m; the average error was 0.0 m. Particle tracking was used with the local model to estimate the concentration of an environmental tracer, sulfur hexafluoride, in 10 USGS transect wells near the Merced River that were sampled for this constituent. Measured and estimated concentrations in the mid-depth and deepest wells, which would be most sensitive to errors in hydraulic conductivity estimates, were consistent. The combined results of particle tracking and sulfur hexafluoride analysis suggest that most water sampled from the transect wells was recharged less that 25 years ago.

Scientific Investigations Report↗

Determination of hydrologic properties needed to calculate average linear velocity and travel time of ground water in the principal aquifer underlying the southeastern part of Salt Lake Valley, Utah

A 48-square-mile area in the southeastern part of the Salt Lake Valley, Utah, was studied to determine if generalized information obtained from geologic maps, water-level maps, and drillers' logs could be used to estimate hydraulic conduc- tivity, porosity, and slope of the potentiometric surface: the three properties needed to calculate average linear velocity of ground water. Estimated values of these properties could be used by water- management and regulatory agencies to compute values of average linear velocity, which could be further used to estimate travel time of ground water along selected flow lines, and thus to determine wellhead protection areas around public- supply wells. The methods used to estimate the three properties are based on assumptions about the drillers' descriptions, the depositional history of the sediments, and the boundary con- ditions of the hydrologic system. These assump- tions were based on geologic and hydrologic infor- mation determined from previous investigations. The reliability of the estimated values for hydro- logic properties and average linear velocity depends on the accuracy of these assumptions. Hydraulic conductivity of the principal aquifer was estimated by calculating the thickness- weighted average of values assigned to different drillers' descriptions of material penetrated during the construction of 98 wells. Using these 98 control points, the study area was divided into zones representing approximate hydraulic- conductivity values of 20, 60, 100, 140, 180, 220, and 250 feet per day. This range of values is about the same range of values used in developing a ground-water flow model of the principal aquifer in the early 1980s. Porosity of the principal aquifer was estimated by compiling the range of porosity values determined or estimated during previous investigations of basin-fill sediments, and then using five different values ranging from 15 to 35 percent to delineate zones in the study area that were assumed to be underlain by similar deposits. Delineation of the zones was based on depositional history of the area and the distri- bution of sediments shown on a surficial geologic map. Water levels in wells were measured twice in 1990: during late winter when ground-water with- drawals were the least and water levels the highest, and again in late summer, when ground- water withdrawals were the greatest and water levels the lowest. These water levels were used to construct potentiometric-contour maps and subsequently to determine the variability of the slope in the potentiometric surface in the area. Values for the three properties, derived from the described sources of information, were used to produce a map showing the general distribution of average linear velocity of ground water moving through the principal aquifer of the study area. Velocity derived ranged from 0.06 to 144 feet per day with a median of about 3 feet per day. Values were slightly faster for late summer 1990 than for late winter 1990, mainly because increased with- drawal of water during the summer created slightly steeper hydraulic-head gradients between the recharge area near the mountain front and the well fields farther to the west. The fastest average linear-velocity values were located at the mouth of Little Cottonwood Canyon and south of Dry Creek near the mountain front, where the hydraulic con- ductivity was estimated to be the largest because the drillers described the sediments to be pre- dominantly clean and coarse grained. Both of these areas also had steep slopes in the potentiometric surface. Other areas where average linear velocity was fast included small areas near pumping wells where the slope in the potentiometric surface was locally steepened. No apparent relation between average linear velocity and porosity could be seen in the mapped distributions of these two properties. Calculation of travel time along a flow line to a well in the southwestern part of the study area during the sum

Water-Resources Investigations Report↗

Arsenic in ground water in selected parts of southwestern Ohio, 2002-03

Arsenic concentrations were measured in 57 domestic wells in Preble, Miami, and Shelby Counties, in southwestern Ohio. The median arsenic concentration was 7.1 ?g/L (micrograms per liter), and the maximum was 67.6 ?g/L. Thirty-seven percent of samples had arsenic concentrations greater than the U.S. Environmental Protection Agency drinking-water standard of 10 ?g/L. Elevated arsenic concentrations (>10 ?g/L) were detected over the entire range of depths sampled (42 to 221 feet) and in each of three aquifer types, Silurian carbonate bedrock, glacial buried-valley deposits, and glacial till with interbedded sand and gravel. One factor common in all samples with elevated arsenic concentrations was that iron concentrations were greater than 1,000 ?g/L. The observed correlations of arsenic with iron and alkalinity are consistent with the hypothesis that arsenic was released from iron oxides under reducing conditions (by reductive dissolution or reductive desorption). Comparisons among the three aquifer types revealed some differences in arsenic occurrence. For buried-valley deposits, the median arsenic concentration was 4.6 ?g/L, and the maximum was 67.6 ?g/L. There was no correlation between arsenic concentrations and depth; the highest concentrations were at intermediate depths (about 100 feet). Half of the buried-valley samples were estimated to be methanic. Most of the samples with elevated arsenic concentrations also had elevated concentrations of dissolved organic carbon and ammonia. For carbonate bedrock, the median arsenic concentration was 8.0 ?g/L, and the maximum was 30.7 ?g/L. Arsenic concentrations increased with depth. Elevated arsenic concentrations were detected in iron- or sulfate-reducing samples. Arsenic was significantly correled with molybdenum, strontium, fluoride, and silica, which are components of naturally ocurring minerals. For glacial till with interbedded sand and gravel, half of the samples had elevated arsenic concentrations. The median was 11.4 ?g/L, and the maximum was 27.6 ?g/L. At shallow depths (<100 feet), this aquifer type had higher arsenic and iron concentrations than carbonate bedrock. It is not known whether these observed differences among aquifer types are related to variations in (1) arsenic content of the aquifer material, (2) organic carbon content of the aquifer material, (3) mechanisms of arsenic mobilization (or uptake), or (4) rates of arsenic mobilization (or uptake). A followup study that includes solid-phase analyses and geochemical modeling was begun in 2004 in northwestern Preble County.

Scientific Investigations Report↗

Vulnerability of recently recharged ground water in the High Plains aquifer to nitrate contamination

Nitrate concentrations greater than background levels have been detected in ground water of the High Plains aquifer. Empirically based models and corresponding maps were developed that predict the vulnerability of the aquifer to nonpoint-source nitrate contamination. The models predict the probability of detecting nitrate concentrations larger than 4 milligrams per liter in ground water of the High Plains aquifer that was recharged during the last 50 years. The models were calibrated by correlating concentrations of nitrate in ground water from 336 wells that intercept recently recharged (less than 50 years) water with anthropogenic and hydrogeologic explanatory variables. Particle-tracking simulations delineated well-contributing areas and determined well-screen depths that intercept recently recharged ground water. The models were developed using multivariate logistic regression, and a map was generated from these models using a geographic information system. Two multivariate logistic regression models of vulnerability were found to have the most statistical significance and the best model fit and predictive ability. The two models represent the Northern High Plains and the combined Central and Southern High Plains, and they indicate that ground-water vulnerability of the entire High Plains aquifer is best explained by the spatial distribution of nonirrigated and irrigated agricultural lands, organic matter of the soil, depth to the regional water table, and clay content of the unsaturated zone. Vulnerability of the Northern High Plains is greater in areas that have more nonirrigated and irrigated agricultural lands and less organic matter in the soil. The vulnerability of the Central and Southern High Plains also is greater in areas that have more nonirrigated and irrigated agricultural lands and also in areas with shallow depths to water table and less clay in the unsaturated zone. The majority (53.3 percent) of the High Plains aquifer has less than a 40-percent predicted probability of nitrate concentrations larger than 4 milligrams per liter. Approximately 21.1 percent of the High Plains aquifer has a relatively high (greater than 60 percent) predicted probability of nitrate concentrations greater than or equal to 4 milligrams per liter. Areas with relatively high predicted probability are located in the southwestern, southern, and eastern areas of the Northern High Plains, in the eastern arm of the Central High Plains, and in southern areas of the Southern High Plains. Areas of the aquifer with relatively low (less than 40 percent) predicted vulnerability to nitrate concentrations greater than or equal to 4 milligrams per liter are located in the northwestern and north-central areas of the Northern High Plains, the central and southern areas of the Central High Plains, and a band across the north-central part of the Southern High Plains. Uncertainty of these vulnerability predictions was estimated by Latin hypercube sampling to address propagation of model and data errors inherently associated with estimates of model coefficients and explanatory variables. Results of the Latin hypercube sampling simulations are presented as uncertainty maps of the lower 5th and upper 95th percentile of the output probability distribution, which represents the 90-percent prediction interval that contains the true probability of detecting nitrate greater than or equal to 4 milligrams per liter. Generally, these uncertainty maps show greater prediction uncertainty in areas with relatively higher predicted vulnerability and lower uncertainty in areas with relatively lower predicted vulnerability.

Scientific Investigations Report↗

Evaluation of geohydrologic framework, recharge estimates and ground-water flow of the Joshua Tree area, San Bernardino County, California

Ground water historically has been the sole source of water supply for the community of Joshua Tree in the Joshua Tree ground-water subbasin of the Morongo ground-water basin in the southern Mojave Desert. The Joshua Basin Water District (JBWD) supplies water to the community from the underlying Joshua Tree ground-water subbasin. The JBWD is concerned with the long-term sustainability of the underlying aquifer. To help meet future demands, the JBWD plans to construct production wells in the adjacent Copper Mountain ground-water subbasin. As growth continues in the desert, there may be a need to import water to supplement the available ground-water resources. In order to manage the ground-water resources and to identify future mitigating measures, a thorough understanding of the ground-water system is needed. The purpose of this study was threefold: (1) improve the understanding of the geohydrologic framework of the Joshua Tree and Copper Mountain ground-water subbasins, (2) determine the distribution and quantity of recharge using field and numerical techniques, and (3) develop a ground-water flow model that can be used to help manage the water resources of the region. The geohydrologic framework was refined by collecting and interpreting water-level and water-quality data, geologic and electric logs, and gravity data. The water-bearing deposits in the Joshua Tree and Copper Mountain ground-water subbasins are Quarternary alluvial deposits and Tertiary sedimentary and volcanic deposits. The Quarternary alluvial deposits were divided into two aquifers (referred to as the 'upper' and the 'middle' alluvial aquifers), which are about 600 feet (ft) thick, and the Tertiary sedimentary and volcanic deposits were assigned to a single aquifer (referred to as the 'lower' aquifer), which is as thick as 1,500 ft. The ground-water quality of the Joshua Tree and Copper Mountain ground-water subbasins was defined by collecting 53 ground-water samples from 15 wells (10 in the Joshua Tree ground-water subbasin and 5 in the Copper Mountain ground-water subbasin) between 1980 and 2002 and analyzing the samples for major ions, nutrients, and selected trace elements. Selected samples also were analyzed for oxygen-18, deuterium, tritium, and carbon-14. The water-quality data indicated that dissolved solids and nitrate concentrations were below regulatory limits for potable water; however, fluoride concentrations in the lower aquifer exceeded regulatory limits. Arsenic concentrations and chromium concentrations were generally below regulatory limits; however, arsenic concentrations measured in water from wells perforated in the lower aquifer exceeded regulatory limits. The carbon-14 activities ranged from 2 to 72 percent modern carbon and are consistent with uncorrected ground-water ages (time since recharge) of about 32,300 to 2,700 years before present. The oxygen-18 and deuterium composition of water sampled from the upper aquifer is similar to the volume-weighted composition of present-day winter precipitation indicating that winter precipitation was the predominant source of ground-water recharge. Field studies, conducted during water years 2001 through 2003 to determine the distribution and quantity of recharge, included installation of instrumented boreholes in selected washes and at a nearby control site. Core material and cuttings from the boreholes were analyzed for physical, chemical, and hydraulic properties. Instruments installed in the boreholes were monitored to measure changes in matric potential and temperature. Borehole data were supplemented with temperature data collected from access tubes installed at additional sites along study washes. Streambed hydraulic properties and the response of instruments to infiltration were measured using infiltrometers. Physical and geochemical data collected away from the stream channels show that direct infiltration of precipitation to depths below the root zone and subsequent gro

Scientific Investigations Report↗

Reconnaissance study of the hydrology of American Memorial Park, Island of Saipan, Commonwealth of the Northern Mariana Islands

American Memorial Park, a unit of the National Park Service on the Island of Saipan, includes among its features a 27-acre estuarine system that has become a rarity within the Commonwealth of the Northern Mariana Islands. The estuarine system's mosaic of marshy areas interspersed with emergent wetlands and mixed wet forests provides critical habitat for various migratory and resident waterfowl, including two Federally listed endangered species: the Marianas gallinule ( Gallinula chloropus guami ) and the nightingale reed warbler ( Acrocephalus luscinia ). With sensitivity to the park's ecologic assets and the uncertainty associated with locally rapid urbanization, a need to better understand the hydrology of American Memorial Park was recognized. To address that need, a reconnaissance study of the park was undertaken during August and September 2005. The goals of the study were (1) to describe the occurrence and salinity of surface and ground water within the park; (2) to develop a hydrologic model of the park area of the island, with emphasis on the 27-acre estuarine system; and (3) to identify additional data needed to further develop this model. With regard to surface water, three freshwater inputs to the park's natural wetland are possible: direct rainfall, seaward-flowing ground water, and overland flow. Direct rainfall, which is an important source of freshwater to the wetland, commonly exceeds evapotranspiration both seasonally and per storm. The seaward flow of ground water is likely to be a source of freshwater to the wetland because ground water generally has an upward vertical component in the nearshore environment. Overland flow upgradient of the park could potentially contribute a significant input of freshwater during periods of intense rainfall, but roads that flank the park's perimeter act as a barrier to surficial inflows. During the reconnaissance, four discrete bodies, or zones, of surface water were observed within the park's natural wetland. Conductivity within these surface-water zones typically ranged from 1,540 to 4,370 microsiemens per centimeter (µS/cm) at 25°C although values as low as 829 and as high as 8,750 µ S/cm were measured. As a result of these observations, the American Memorial Park wetland area meets the definition criteria of an estuarine system that is dominantly oligohaline. Conductivity was also measured in a constructed wetland that was built within the park to augment the storm-drainage infrastructure of the village of Garapan. Reverse-osmosis facilities, in operation at hotels adjacent to the park, have historically discharged highly saline wastewater into the storm-drainage system. This collective storm and wastewater flow is routed into the constructed wetland and from there into the ocean. The conductivity of water in the constructed wetland ranged from 45,000 to 62,500 µS/cm , exceeding nominal seawater values by as much as 25 percent, with the highest conductivities recorded near discharging storm drains. With regard to ground water, the reconnaissance included installation of a ground-water-monitoring network. Data collected from this network identified the presence of freshwater underlying the park and indicated that surface water is directly connected to ground water in the natural wetland because the water levels of both surface water and ground water directly varied with the tide. Conductivities of ground-water samples from wells in the monitoring network indicated that ground-water salinity was geographically related: conductivities were lower (801-2,490 (µS/cm) in surficially dry areas, intermediate (6,090-9,180 (µS/cm) in natural-wetland areas, and higher (18,250-27,700 (µS/cm) in areas adjacent to the constructed wetland and its associated ocean-discharge channel. Synoptic water-level surveys were made to enhance understanding of the spatial expression of the water table; they were scheduled to overlap with peak and trough tidal signals to enable limited characteri

Scientific Investigations Report↗

Occurrence of Uranium and 222Radon in Glacial and Bedrock Aquifers in the Northern United States, 1993-2003

Water-quality data collected from 1,426 wells during 1993-2003 as part of the U.S. Geological Survey National Water-Quality Assessment (NAWQA) program were evaluated to characterize the water quality in glacial and bedrock aquifers of the northern United States. One of the goals of the NAWQA program is to synthesize data from individual studies across the United States to gain regional- and national-scale information about the behavior of contaminants. This study focused on the regional occurrence and distribution of uranium and 222radon in ground water in the glacial aquifer system of the United States as well as in the Cambrian-Ordovician and the New York and New England crystalline aquifer systems that underlie the glacial aquifer system. The occurrence of uranium and 222radon in ground water has long been a concern throughout the United States. In the glacial aquifers, as well as the Cambrian-Ordovician and the New York and New England crystalline aquifer systems of the United States, concentrations of uranium and 222radon were highly variable. High concentrations of uranium and 222radon affect ground water used for drinking water and for agriculture. A combination of information or data on (1) national-scale ground-water regions, (2) regional-scale glacial depositional models, (3) regional-scale geology, and (4) national-scale terrestrial gamma-ray emissions were used to confirm and(or) refine the regions used in the analysis of the water-chemistry data. Significant differences in the occurrence of uranium and 222radon, based primarily on geologic information were observed and used in this report. In general, uranium was highest in the Columbia Plateau glacial, West-Central glacial, and the New York and New England crystalline aquifer groups (75th percentile concentrations of 22.3, 7.7, and 2.9 micrograms per liter (ug/L), respectively). In the Columbia Plateau glacial and the West-Central glacial aquifer groups, more than 10 percent of wells sampled had concentrations of uranium that exceeded the U.S. Environmental Protection Agency (USEPA) Maximum Contaminant Level of 30 ug/L; in the New York and New England crystalline aquifer group, 4 percent exceeded 30 ug/L. Ground-water samples with high concentrations of uranium were commonly linked to geologic sources rich in uranium. In eight of nine aquifer groups defined for this study, concentrations of uranium correlated significantly with concentrations of sulfate in ground water (Spearman's rho = 0.20 to 0.56; p < 0.05). In the Columbia Plateau, glacial aquifers were derived in part from basaltic lava flows, some felsic volcanic rocks, and some paleo-lake bed materials that may be rich in uranium. In the Columbia Plateau and West-Central glacial aquifer groups, uranium correlated with total dissolved solids, bicarbonate, boron, lithium, selenium, and strontium. In the West-Central glacial aquifer group, rocks such as Cretaceous marine shales, which are abundant in uranium, probably contribute to the high concentrations in ground water; in the southern part of this group, which extends into Nebraska, the glacial or glacial-related sediment may be interbedded with uranium-rich materials that originated to the north and west and in the Rocky Mountains. In New England, crystalline bedrock that is granitic, such as two-mica granites, as well as other high-grade metamorphic rocks, has abundant uranium that is soluble in the predominantly oxic to sub-oxic geochemical conditions. This appears to contribute to high uranium concentrations in ground water. The highest 222radon concentrations were present in samples from wells completed in the New York and New England crystalline aquifer group; the median value (2,122 picocurries per liter (pCi/L)) was about 10 times the median values of all other aquifer groups. More than 25 percent of the samples from the New York and New England crystalline aquifer group wells had 222radon concentrations that exceeded the USEPA Alternative

Scientific Investigations Report↗

Ground-Water Temperature, Noble Gas, and Carbon Isotope Data from the Espanola Basin, New Mexico

Ground-water samples were collected from 56 locations throughout the Espanola Basin and analyzed for general chemistry (major ions and trace elements), carbon isotopes (delta 13C and 14C activity) in dissolved inorganic carbon, noble gases (He, Ne, Ar, Kr, Xe, and 3He/4He ratio), and tritium. Temperature profiles were measured at six locations in the southeastern part of the basin. Temperature profiles suggest that ground water generally becomes warmer with distance from the mountains and that most ground-water flow occurs at depths <250 m below ground surface. The two dominant water types in the basin are Ca/CO3+HCO3 and Na/CO3+HCO3, followed by mixed-cation/CO3+HCO3. Waters generally evolve from Ca/CO3+HCO3 to Na/CO3+HCO3 with increasing residence time through Ca-Na cation exchange with clay minerals. Basin ground water can be divided into four hydrochemical zones based on chemical and isotopic composition: West, Southeast, Northeast, and Central Deep. Hydrochemical zone boundaries are roughly correlated with contacts between geologic units or lithosome transitions within the Tesuque Formation. Geochemical mass-transfer modeling was performed using NETPATH and 14C ages were adjusted accordingly. Isotopic input parameters were varied within reasonable limits to assess uncertainty in the adjusted 14C ages. For each sample, a preferred adjusted age was selected from multiple possible adjusted ages based primarily on the fit between measured and modeled delta 13C values. The range of possible age adjustments for most samples is about 6,000 years or less, indicating that the preferred adjusted age for most samples has a total range of uncertainty of <6,000 years. Preferred adjusted ages range from 0 to 35,400 years. First-order trends in the age distribution include older ages generally occurring farther from rivers on the east side of the basin and farther from the mountains, consistent with both mountain-front recharge and recharge on the basin floor in the form of stream-loss and arroyo recharge. Ages also increase with depth in the Southeast zone, the only area where discrete-depth samples could be collected. Recharge temperatures derived from noble gas concentrations were used in conjunction with an empirically derived local relationship between recharge temperature and elevation to constrain recharge elevation and to estimate fractions of mountain-block recharge (MBR) in sampled waters of Holocene age. Noble gas recharge temperatures indicate that ground water in the Southeast zone contains a significant fraction of MBR, commonly 20-50 percent or more. The same is apparently true for the Northeast zone, though only two data points could be used to evaluate the MBR fraction in this area. Recharge temperatures indicate that the upper 30 m of the regional aquifer on the Pajarito Plateau typically contain little or no MBR. Tritium concentrations and apparent 3H/3He ages indicate that water in the mountain block is dominantly <50 years old, and water in the basin-fill is dominantly >50 years old, consistent with the 14C ages. Terrigenic He (Heterr) concentrations in ground water are high (log Delta Heterr of 2 to 5) throughout much of the basin. High Heterr concentrations are probably caused by in situ production in the Tesuque Formation from locally high concentrations of U-bearing minerals (Northeast zone only), or by upward diffusive/advective transport of crustal- and mantle-sourced He possibly enhanced by basement piercing faults, or by both. The 3He/4He ratio of Heterr (Rterr) is commonly high (Rterr/Ra of 0.3-2.0, where Ra is the 3He/4He ratio in air) suggesting that Espanola Basin ground water commonly contains mantle-sourced He. The 3He/4He ratio of Heterr is generally the highest in the western and southern parts of the basin, closest to the western border fault system and the Quaternary to Miocene volcanics of the Jemez Mountains and Cerros del Rio.

Scientific Investigations Report↗

Possible changes in ground-water flow to the Pecos River caused by Santa Rosa Lake, Guadalupe County, New Mexico

In 1980 Santa Rosa Dam began impounding water on the Pecos River about 7 miles north of Santa Rosa, New Mexico, to provide flood control, sediment control, and storage for irrigation. Santa Rosa Lake has caused changes in the groundwater flow system, which may cause changes in the streamflow of the Pecos River that cannot be detected at the present streamflow gaging stations. Data collected at these stations are used to measure the amount of water available for downstream users. A three-dimensional groundwater flow model for a 950 sq mi area between Anton Chico and Puerto de Luna was used to simulate the effects of Santa Rosa Lake on groundwater flow to a gaining reach of the Pecos River for lake levels of 4,675, 4,715, 4,725, 4,750, 4,776, and 4,797 feet above sea level and durations of impoundment of 30, 90, 182, and 365 days for all levels except 4 ,797 feet. These simulations indicated that streamflow in the Pecos River could increase by as much as 2 cu ft/sec between the dam and Puerto de Luna if the lake level were maintained at 4 ,797 feet for 90 days or 4,776 feet for 1 year. About 90% of this increased streamflow would occur < 0.5 mi downstream from the dam, some of which would be measured at the streamflow gaging station located 0.2 mile downstream from the dam. Simulations also indicated that the lake will affect groundwater flow such that inflow to the study area may be decreased by as much as 1.9 cu ft/sec. This water may leave the Pecos River drainage basin or be diverted back to the Pecos River downstream from the gaging station near Puerto de Luna. In either case, this quantity represents a net loss of water upstream from Puerto de Luna. Most simulations indicated that the decrease in groundwater flow into the study area would be of about the same quantity as the simulated increase in streamflow downstream from the dam. Therefore, the net effect of the lake on the flow of the Pecos River in the study area appears to be negligible. Model simulations indicated that effect of lake levels below 4 ,750 feet on water levels in observation wells completed in the San Andres Limestone could not be distinguished from the effects of other hydrologic stresses. (Author 's abstract)

Water-Resources Investigations Report↗

Analysis of data on nutrients and organic compounds in ground water in the upper Snake River basin, Idaho and western Wyoming, 1980-91

Nutrient and organic compound data from the U.S. Geological Survey and the U.S. Environmental Protection Agency STORET data bases provided information for development of a preliminary conceptual model of spatial and temporal ground-water quality in the upper Snake River Basin. Nitrite plus nitrate (as nitrogen; hereafter referred to as nitrate) concentrations exceeded the Federal drinking-water regulation of 10 milligrams per liter in three areas in Idaho" the Idaho National Engineering Laboratory, the area north of Pocatello (Fort Hall area), and the area surrounding Burley. Water from many wells in the Twin Falls area also contained elevated (greater than two milligrams per liter) nitrate concentrations. Water from domestic wells contained the highest median nitrate concentrations; water from industrial and public supply wells contained the lowest. Nitrate concentrations decreased with increasing well depth, increasing depth to water (unsaturated thickness), and increasing depth below water table (saturated thickness). Kjeldahl nitrogen concentrations decreased with increasing well depth and depth below water table. The relation between kjeldahl nitrogen concentrations and depth to water was poor. Nitrate and total phosphorus concentrations in water from wells were correlated among three hydrogeomorphic regions in the upper Snake River Basin, Concentrations of nitrate were statistically higher in the eastern Snake River Plain and local aquifers than in the tributary valleys. There was no statistical difference in total phosphorus concentrations among the three hydrogeomorphic regions. Nitrate and total phosphorus concentrations were correlated with land-use classifications developed using the Geographic Information Retrieval and Analysis System. Concentrations of nitrate were statistically higher in area of agricultural land than in areas of rangeland. There was no statistical difference in concentrations between rangeland and urban land and between urban land and agricultural land. There was no statistical difference in total phosphorus concentrations among any of the land-use classifications. Nitrate and total phosphorus concentrations also were correlated with land-use classifications developed by the Idaho Department of Water Resources for the Idaho part of the upper Snake River Basin. Nitrate concentrations were statistically higher in areas of irrigated agriculture than in areas of dryland agriculture and rangeland. There was no statistical difference in total phosphorus concentrations among any of the Idaho Department of Water Resources land-use classifications. Data were sufficient to assess long-term trends of nitrate concentrations in water from only eight wells: four wells north of Burley and four wells northwest of Pocatello. The trend in nitrate concentrations in water from all wells in upward. The following organic compounds were detected in ground water in the upper Snake River Basin: cyanazine, 2,4-D DDT, dacthal, diazinon, dichloropropane, dieldrin, malathion, and metribuzin. Of 211 wells sampled for organic compounds, water from 17 contained detectable concentrations.

Idaho;Montana;Nevada;Utah;Wyoming↗

Quantitative assessment of the shallow ground-water flow system associated with Connetquot Brook, Long Island, New York

Streamflow on Long Island is derived principally from shallow ground water that flows above the deeper regional flow system. The movement of shallow ground water was studied during 1975-82 at Connetquot Brook, an undisturbed stream in Connetquot River State Park, in south-central Long Island, New York. The investigation encompassed (1) field studies of streamflow, ground-water levels, and age of water as indicated by tritium and dissolved-oxygen concentrations and (2) numerical simulation of the shallow flow system to evaluate the hydraulic factors that govern the direction of shallow ground-water flow near and beneath the stream. Analysis of water-level data indicates that ground water flows essentially horizontally throughout the drainage basin except near and beneath the stream, where it moves vertically upward toward the stream discharge boundary. Water levels in wells driven directly into the streambed and into the streambank at three sites were 1 to 2 feet higher than stream stage in the first 5 feet of penetration. Increases in head, which were detected to depths of 30 feet beneath the streambed, indicate upward movement of water above that depth. Hydraulic conductivity of the streambed sediments was calculated from head gradients in the streambed and from measured stream seepage; values were between 11 and 15 feet per day. Water samples from selected wells were analyzed for dissolved-oxygen and tritium concentrations to determine the relative age of the water in an attempt to locate the bottom boundary of the shallow flow system. Dissolved oxygen showed no pattern, but tritium concentrations about 1,000 feet from the stream were lower than those near the stream. The tritium concentrations indicate that the lower flow boundary was between 45 and 100 feet below the water table. A two-dimensional cross-sectional flow model of the shallow flow system was developed. The near-stream model response compared well with field data when the streambed discharge boundary was simulated as a uniform leaky bed. A systematic sensitivity analysis was done to determine which factors have the greatest influence on hydraulic head in the system. Ten dimensional parameters that describe the important aspects of the flow system were combined into a series of dimensionless parameters to simplify analysis. Results indicate that (1) streambed factors (width and hydraulic conductivity) are most influential upon heads near the stream, (2) factors representing thickness of the shallow flow system influence heads distant from the stream but have a negligible effect near the stream, and (3) factors that represent the quantity of water entering the system (recharge) influence the heads throughout the area. Field measurements of hydraulic head indicate that the thickness of the shallow flow system below the stream channel is about 30 feet. However, results of the sensitivity analysis indicate that the shallow system's thickness has a negligible effect on head distribution beneath the stream.

Water Supply Paper↗

Geohydrology and water quality of the Calumet aquifer, in the vicinity of the Grand Calumet River/Indiana Harbor Canal, northwestern Indiana

The water-table configuration of the Calumet aquifer in the vicinity of the Grand Calumet River/Indiana Harbor Canal in Lake County, northwestern Indiana, reflects the complexity of the shallow ground-water-flow system. Large depressions in the water table in sewered areas interrupt broad ground-water divides between rivers. The aquifer/stream interactions along the Grand Calumet River/ Indiana Harbor Canal are directly related to Lake Michigan water levels because of a direct connection of the Grand Calumet River/Indiana Harbor Canal to the lake. Fluctuations in lake levels and evapotranspiration result in reversals in ground-water flow near the river and canal that last from several hours to several months. Most of the water from the Calumet aquifer discharges into sewers, the Grand Calumet River/Indiana Harbor Canal, Lake Michigan, and Silurian carbonate bedrock. Model simulations of ground-water flow for the study area indicate that the Calumet aquifer discharges about 15 ft 3 /s (cubic feet per second) of ground water to sewers, about 10 ft 3 /s to the Grand Calumet River/Indiana Harbor Canal, and about 4 ft 3 /s to Lake Michigan along a 25-mile section of shoreline. Estimates of groundwater flow from the Calumet aquifer to the bedrock range from 0 to 10 ft 3 /s. Results of analyses of water samples collected from wells in five land-use types steel industry, petrochemical industry, commercial and light industry, residential, and parks were compared. The highest median concentrations of inorganic ions and the most detections of organic compounds generally occurred in water samples from wells on the steel and petrochemical land-use areas. Water samples collected from wells on the commercial and light industrial land-use areas generally had lower median chemical concentrations than the samples from the steel and petrochemical land-use areas and greater median concentrations than the samples from the residential and park land-use areas. Seven of 52 acid-extractable and base/neutralextractable organic compounds and 17 of 36 volatile organic compounds analyzed were detected in a total of 35 wells. Only 4 of the 88 organic analytes phenols, bis(2-ethylhexyl)phthalate, benzene, and toluene were detected in more than 5 of the 35 wells. A comparison of primarily inorganic-constituent data from the five land-use groups to inorganic-constituent data from sites known to be contaminated shows that constituent concentrations in ground waters from wells in the land-use areas generally are lower than those in ground water from contaminated areas. Abstract 1 Likewise, a comparison of inorganic-constituent data from the land-use groups to inorganic-constituent data from areas relatively unaffected by human presence shows that constituent concentrations in ground water from wells in the land-use areas generally are greater than those in ground water from the unaffected areas. Some documented but unaccounted for chemical loads in the Grand Calumet River are from ground water. Ground water probably contributes more than 10 percent of the total chemical load of ammonia, chromium, and cyanide to the Grand Calumet River. In comparison, about 1 to 3 percent of the total streamflow in the Grand Calumet River is from ground water. Of the four major groundwater sinks in the aquifer, the east branch of the Grand Calumet River and the Indiana Harbor Canal generally receive the greatest chemical loads from ground water, whereas Lake Michigan generally receives the smallest loads.

Indiana↗

Analysis and simulation of ground-water flow in Lake Wales Ridge and adjacent areas of central Florida

The Lake Wales Ridge is an uplands recharge area in central Florida that contains many sinkhole lakes. Below-normal rainfall and increased pumping of ground water have resulted in declines both in ground-water levels and in the water levels of many of the ridge lakes. A digital flow model was developed for a 3,526 square-mile area to help understand the current (1990) ground-water flow system and its response to future ground-water withdrawals. The ground-water flow system in the Lake Wales Ridge and adjacent area of central Florida consists of a sequence of sedimentary aquifers and confining units. The uppermost water-bearing unit of the study area is the surficial aquifer. This aquifer is generally unconfined and is composed primarily of clastic deposits. The surficial aquifer is underlain by the confined intermediate aquifer and confining units which consists of up to three water-bearing units composed of interbedded clastics and carbonate rocks. The lowermost unit of the ground- water flow system, the confined Upper Floridan aquifer, consists of a thick, hydraulically connected sequence of carbonate rocks. The Upper Floridan aquifer is about 1,200 to 1,400 feet thick and is the primary source for ground-water withdrawals in the study area. The generalized ground-water flow system of the Lake Wales Ridge is that water moves downward from the surficial aquifer to the intermediate aquifer and the Upper Floridan aquifer in the central area, primarily under the ridges, with minor amounts of water flow under the flatlands. The water flows laterally away from the central area, downgradient to discharge areas to the west, east, and south, and locally along valleys of major streams. Upward leakage occurs along valleys of major streams. The model was initially calibrated to the steady-state conditions representing September 1989. The resulting calibrated hydrologic parameters were then tested by simulating transient conditions for the period October 1989 through 1990. A final test of model calibration was conducted by successfully simulating transient conditions for the period October 1988 through September 1989. Altitudes of the water table, base of the surficial aquifer, riverbed conductances, confining-unit leakances, aquifer transmissivities, and net recharge and discharge rates were determine during calibration. Steady-state and transient simulations reasonably approximated measured aquifer heads and lake levels. Residuals were within the established calibration criteria that required 68 percent of all simulated heads to be within + - 2 feet of observed surficial aquifer heads and lake levels and + - 5 feet of observed intermediate and Upper Floridan aquifer heads. Simulation of streamflow was poor, probably due to the scale of the model and regulated streamflow conditions. Simulation indicates a marked difference between the ground-water flow rates of September 1989 (steady-state conditions, end of wet season) and May 1990 (large pumpage, end of dry season) in million gallons per day: September May 1989 1990 Pumping rate 126 486 Donward leakage (into 367 564 Upper Floridan aquifer) Streamflow 67 13 Net lateral boundary flow 218 115 Total discharge (excluding 479 626 evapotranspiration. The calibrated flow model was used to simulate the short-term (one year) effects of 1990 water year pumpage (349 Mgal/d) on the September 1989 ground- water flow system in response to five different pumping schemes: (2) no pumpage, (2) no public supply pumpage, (3) no industrial pumpage, (4) no agricultural pumpage, and (5) no regional pumping outside the Water Use Caution Area. Simulation of no pumpage indicated maximum aquifer head rises of about 2 feet in the surficial aquifer and lakes, about 12 feet in the intermediate aquifer and about 16 feet in the Upper Floridan aquifer. The high rate recharge areas along the Lake Wales Ridge are most affected by pumping. Simulation of no agricultural pumpage resulted in a maximum recovery of about 2 feet in each aquifer. Simulation of no industrial or mining pumpage resulted in a maximum of less than one foot in the surficial aquifer and lakes, about 10 feet in the intermediate aquifer, and about 14 feet in the Upper Floridan aquifer. Simulation of no public supply pumpage indicated a maximum recovery of less than one foot in the surficial aquifer and lakes, about 4 feet in the intermediate aquifer, and about 10 feet in the Upper Floridan aquifer. Simulation of no regional pumping outside the Water Use Caution Area indicated recoveries of less than 2 feet within the Water Use Caution Area. Simulations were used to investigate long- term aquifer changes in response to two development alternatives: (1) continuation of 1990 water year hydrologic conditions and pumping rates (349 Mgal/d), and (2) increased pumpage (506 Mgal/d). Simulation of continued 1990 water year hydrologic conditions and pumping for 20 years indicated that head decline of more than 10 feet might be expected in each aquifer in the northern part of the Water Use Caution Area. Simulation of increased pumpage (an additional 45 percent) for 20 years indicated head declines of more than 20 feet in each aquifer in the northern part of the Water Use Caution Area. Because lakes are hydraulically connected to the surficial aquifer, lake levels within the Water Use Caution Area could decline substantially as a result of present and future pumping and a continuation of 1990 hydrologic conditions. These relatively large head declines were accompanied by decreased simulated lateral boundary outflow of about 40 percent and decreased simulated streamflow of about 32 percent. Equilibrium conditions at the end of the two 20-year simulations had not been attained.

Florida↗

Detection of underground voids in Ohio by use of geophysical methods

Geophysical methods are generally classified as electrical, potential field, and seismic methods. Each method type relies on contrasts of physical properties in the subsurface. Forward models based on the physical properties of air- and water-filled voids within common geologic materials indicate that several geophysical methods are technically feasible for detection of subsurface voids in Ohio, but ease of use and interpretation varies widely between the methods. Ground-penetrating radar is the most rapid and cost-effective method for collection of subsurface data in areas associated with voids under roadways. Electrical resistivity, gravity, or seismic reflection methods have applications for direct delineation of voids, but data-collection and analytical procedures are more time consuming. Electrical resistivity, electromagnetic, or magnetic methods may be useful in locating areas where conductive material, such as rail lines, are present in abandoned underground coal mines. Other electrical methods include spontaneous potential and very low frequency (VLF); these latter two methods are considered unlikely candidates for locating underground voids in Ohio. Results of ground-penetrating radar surveys at three highway sites indicate that subsurface penetration varies widely with geologic material type and amount of cultural interference. Two highway sites were chosen over abandoned underground coal mines in eastern Ohio. A third site in western Ohio was chosen in an area known to be underlain by naturally occurring voids in lime stone. Ground-penetrating radar surveys at Interstate 470, in Belmont County, Ohio, indicate subsurface penetration of less than 15 feet over a mined coal seam that was known to vary in depth from 0 to 40 feet. Although no direct observations of voids were made, anomalous areas that may be related to collapse structures above voids were indicated. Cultural interference dominated the radar records at Interstate 70, Guernsey County, Ohio, where coal was mined under the site at a depth of about 50 feet. Interference from overhead powerlines, the field vehicle, and guardrails complicated an interpretation of the radar records where the depth of penetration was estimated to be less than 5 feet. Along State Route 33, in Logan County, Ohio, bedding planes and structures possibly associated with dissolution of limestone were profiled with ground-penetrating radar. Depth of penetration was estimated to be greater than 50 feet.

Water-Resources Investigations Report↗

Occurrence and transport of cadmium, lead, and zinc in the Spokane River basin, Idaho and Washington, water years 1999-2001

A water-quality investigation of the Clark Fork-Pend Oreille and Spokane River Basins began in 1997 as part of the U.S. Geological Survey National Water-Quality Assessment Program. As part of the investigation, selected streams in the Spokane River Basin were sampled for trace metals during water years 1999–2001. These data, combined with data collected as part of a U.S. Environmental Protection Agency Remedial Investigation/ Feasibility Study, were used to assess the occurrence, loads, and transport of cadmium, lead, and zinc at 21 streamflow-gaging stations in the Spokane River Basin. Concentrations of dissolved and total cadmium, lead, and zinc varied widely both at and among stations. At most stations, dissolved cadmium and zinc composed most of the total concentrations; dissolved lead generally composed less than 10 percent of the total lead concentration. From the South Fork Coeur d’Alene River near Mullan downstream to the South Fork Coeur d’Alene River near Pinehurst, concentrations of trace metals increased 2 to 4 orders of magnitude. The mean flow-weighted concentrations of total cadmium, lead, and zinc near Pinehurst for water years 1999–2001 were 5.7, 80, and 810 micrograms per liter ( µg/L), respectively. On the Coeur d’Alene River near Harrison, downstream from the confluence of the metal-enriched South Fork and the relatively dilute North Fork Coeur d’Alene River, the mean flow-weighted concentrations of total cadmium, lead, and zinc were 1.6, 88, and 240 µg/L, respectively. Trace-metal concentrations were smaller in the Spokane River than in the Coeur d’Alene River because of dilution and retention in Coeur d’Alene Lake. The mean flowweighted concentrations of total cadmium, lead, and zinc in the Spokane River near Post Falls were 0.32, 3.1, and 71 µg/L, respectively. Regression models relating the mass transport, or load, of trace metals to changes in stream discharge and time were successful in simulating the variability in trace-metal concentrations and loads. The median coefficient of determination for the load models for the 21 stations was largest for total lead (92 percent) and smallest for dissolved and total cadmium (82 percent). Whereas most of the cadmium and zinc loads in the Spokane River Basin were derived from the South Fork Coeur d’Alene River, most of the lead load was derived from the Coeur d’Alene River downstream from the confluence of the North and South Forks. Major tributary sources of trace metals to the South Fork Coeur d’Alene River were Canyon Creek, Ninemile Creek, and Government Gulch. These three tributaries contributed about 3,000 pounds of cadmium, 23,000 pounds of lead, and 310,000 pounds of zinc annually to the South Fork Coeur d’Alene River. Erosion and transport of sediment-bound lead in the Coeur d’Alene River was the primary source of total lead, accounting for almost 400,000 pounds annually during water years 1999–2000. Ground-water discharge in the area of the Bunker Hill Superfund site was a major source of zinc in the South Fork Coeur d’Alene River, contributing more than 250,000 pounds per year. During water years 1999–2000, the average annual loads of cadmium, lead, and zinc transported from the Coeur d’Alene, St. Joe, and St. Maries Rivers to Coeur d’Alene Lake were 8,900, 500,000, and 1.4 million pounds, respectively. The Coeur d’Alene River accounted for more than 99 percent of the total load of each of these three metals entering the lake. About 4,600 pounds of cadmium, 44,000 pounds of lead, and 980,000 pounds of zinc were transported from Coeur d’Alene Lake into the Spokane River. Between the Spokane River near Post Falls, Idaho, and the Spokane River at Long Lake, Washington, there was an annual net loss of about 2,600, 20,000, and 250,000 pounds of cadmium, lead, and zinc, respectively. About 2,000 pounds of cadmium, 24,000 pounds of lead, and 730,000 pounds of zinc were transported annually downstream from Long Lake toward the Columbia River.

Idaho;Washington↗

Simulated ground-water flow for a pond-dominated aquifer system near Great Sandy Bottom Pond, Pembroke, Massachusetts

A ground-water flow simulation for a 66.4-square-mile area around Great Sandy Bottom (GSB) Pond (105 acres) near Pembroke, Massachusetts, was developed for use by local and State water managers to assess the yields for public water supply of local ponds and wells for average climatic and drought conditions and the effects of water withdrawals on nearby water levels and streamflows. Wetlands and ponds cover about 30 percent of the study area and the aquifer system is dominated by interactions between ground water and the ponds. The three largest surface-water bodies in the study area are Silver Lake (640 acres), Monponsett Pond (590 acres), and Oldham Pond (236 acres). The study area is drained by tributaries of the Taunton River to the southwest, the South and North Rivers to the northeast, and the Jones River to the southeast. In 2002, 10.8 million gallons per day of water was exported from ponds and 3.5 million gallons per day from wells was used locally for public supply. A transient ground-water-flow model with 69 monthly stress periods spanning the period from January 1998 through September 2003 was calibrated to stage at GSB Pond and nearby Silver Lake and streamflow and water levels collected from September 2002 through September 2003. The calibrated model was used to assess hydrologic responses to a variety of water-use and climatic conditions. Simulation of predevelopment (no pumping or export) average monthly (1949-2002) water-level conditions caused the GSB Pond level to increase by 6.3 feet from the results of a simulation using average 2002 pumping for all wells, withdrawals, and exports. Most of this decline can be attributed to pumping, withdrawals, and exports of water from sites away from GSB Pond. The effects of increasing the export rate from GSB Pond by 1.25 and 1.5 times the 2002 rate were a lowering of pond levels by a maximum of 1.6 and 2.8 feet, respectively. Simulated results for two different drought conditions, one mild drought similar to that of 1979-82 and a more severe drought similar to that of 1963-66, but with current (2002) pumping, were compared to results for average monthly recharge conditions (1949-2002). Simulated mild drought conditions showed a reduction of GSB Pond level of about 1.3 feet and a lower streamflow of about 1.7 percent in the nearby stream. Simulated severe drought conditions reduced the pond level at GSB Pond by almost 7 feet and lowered streamflow by about 37 percent. Varying cranberry-irrigation practices had little effect on simulated GSB Pond water levels, but may be important in other ponds. The model was most sensitive to changes in areal recharge. An increase and decrease of 22 percent in recharge produced changes in the GSB Pond water level of +1.4 feet and -2.4 feet, respectively. The accuracy of simulation results was best in the central portion of the study area in the immediate location of GSB Pond. The model was developed with the study-area boundary far enough away from the GSB Pond area that the boundary would have minimal effect on the water levels in GSB Pond, nearby ponds, and the underlying aquifer system. The model is best suited for use by local and State water managers to assess the effects of different withdrawal scenarios for wells and ponds near GSB Pond and for general delineation of areas contributing recharge to wells and ponds in the vicinity of GSB Pond. The model in its current form may not be well suited to detailed analyses of water budgets and flow patterns for parts of the study area farther from GSB Pond without further investigation, calibration, and data collection.

Scientific Investigations Report↗

Projected ground-water development, ground-water levels, and stream-aquifer leakage in the South Fork Solomon River Valley between Webster Reservoir and Waconda Lake, north-central Kansas, 1979-2020

A two-dimensional finite difference computer model was used to project changes in the potentiometric surface, saturated thickness, and stream aquifer leakage in an alluvial aquifer resulting from four instances of projected groundwater development. The alluvial aquifer occurs in the South Fork Solomon River valley between Webster Reservoir and Waconda Lake in north-central Kansas. In the first two projections, pumpage for irrigation was held constant at 1978 rates throughout the projection period (1979-2020). In the second two projections, the 1978 pumpage was progressively increased each yr through 2020. In the second and fourth projections, surface water diversions in the Osborne Irrigation Canal were decreased by 50 %. For the third and fourth projections, each grid-block in the modeled area was classified initially as one of six types according to whether it represented irrigable or nonirrigable land, to its saturated thickness, to its location inside or outside the canal-river area, and to its pumping rate. The projected base-flow rates (leakage from the aquifer to the river) were lower during the irrigation season (June, July, and August) than during the other months of the yr because of the decline in hydraulic head produced by groundwater pumpage. Stream depletion, calculated as a decrease below the average (1970-78) estimated winter base-flow rate of 16.5 cu ft/sec, varied inversely with base flow. For the first two projections, a constant annual cycle of well pumpage and recharge was used throughout the projection period. Aquifer leakage to the river was nearly constant by the mid-to-late 1990's, implying that flow conditions had attained a stabilized annual cycle. The third and fourth projections never attained an annual stabilized cycle because the irrigation pumpage rate was increased each year. By the early 1980's, the hydraulic head had fallen below river stage, reversing the hydraulic gradient at the stream-aquifer interface and resulting in net leakage from the river to the aquifer during the summer months. By the early 1990 's, the projected potentiometric surface of the aquifer was lower than the river stage even during the winter and spring months. (Author 's abstract)

Water-Resources Investigations Report↗

Simulated ground-water flow and water quality of the Mississippi River alluvium near Burlington, Iowa, 1999

The City of Burlington, Iowa, obtains some of its public water supply by withdrawing ground water from the Mississippi River alluvium, an alluvial aquifer adjacent to the Mississippi River. The U.S. Geological Survey, in cooperation with the City of Burlington, conducted a hydrologic study of the Mississippi River alluvium near Burlington in 1999 to improve understanding of the flow system, evaluate the effects of hypothetical pumping scenarios on the flow system, and evaluate selected water-quality constituents in parts of the alluvium. A steady-state, ground-water flow model was constructed for a 7-square-mile area of the alluvium using October 1999 hydrologic conditions to help conceptualize the flow system, identify sources of water to the alluvium, and assess potential effects from additional hypothetical ground-water withdrawals from the lower alluvium. The model was discretized into a 70-row by 68-column grid using cells measuring 200 feet by 200 feet. Three model layers were used to represent flow in the upper part of the alluvium, lower part of the alluvium, and bedrock. The primary sources of ground water to the alluvium were subsurface flow from areas of the alluvium adjacent to the modeled area, recharge from precipitation, subsurface flow from Flint River streamchannel deposits adjacent to the alluvium, and river leakage. The primary components of outflow from the flow system were river leakage, municipal ground-water withdrawals (pumpage), and leakage to drainage ditches. Three hypothetical pumping scenarios were used to assess the potential effects of increased ground-water withdrawals from the lower part of the alluvium: (1) pumping a second existing municipal well at a rate of 0.5 million gallons per day, (2) pumping a hypothetical well completed in an area between the city water-treatment facility and Flint River at a rate of 1.0 million gallons per day, and (3) pumping a hypothetical well completed in an area south of the Flint River at a rate of 1.0 million gallons per day. Maximum additional simulated drawdown in the upper alluvium ranged from less than 3 feet (for scenario 1) to about 9 feet (for scenario 3). Maximum additional simulated drawdown in the lower alluvium ranged from about 12 feet (for scenario 1) to about 34 feet (for scenario 3). Water budgets for each scenario indicated future additional withdrawals from the flow system near Burlington&rsquo;s existing municipal wells would significantly increase the amount of river leakage into the flow system. Water samples collected from the alluvium indicated ground water can be classified as a calcium-magnesium-bicarbonate type. Reducing conditions likely occur in some localized areas of the alluvium, as suggested by relatively large concentrations of dissolved iron (4,390 micrograms per liter) and manganese (2, 430 micrograms per liter) in some ground-water samples. Nitrite plus nitrate was detected at concentrations greater than or equal to 8 milligrams per liter in three samples collected from observation wells completed in close proximity to cropland; the nitrite plus nitrate concentration in one groundwater sample exceeded the U.S. Environmental Protection Agency Maximum Contaminant Level for nitrate in drinking water (10 milligrams per liter as N). Triazine herbicides (atrazine, cyanazine, propazine, simazine, and selected degradation products) and chloroacetanilide herbicides (acetochlor, alachlor, and metolachlor) were detected in some water samples. A greater number of herbicide compounds were detected in surface-water samples than in ground-water samples. Herbicide concentrations typically were at least an order of magnitude greater in surfacewater samples than in ground-water samples. The Maximum Contaminant Level for alachlor (2 micrograms per liter) was exceeded in a sample from Dry Branch Creek at Tama Road and for atrazine (3 micrograms per liter) was exceeded in samples collected from Dry Branch Creek at Tama Road and the county drainage ditch at Tama Road.

Iowa↗