Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Geological & Geophysical Surveys”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57Linked to original sources
USGS1993

Application of borehole geophysics in defining the wellhead protection area for a fractured crystalline bedrock aquifer

Wellbore geophysical techniques were used to characterize fractures and flow in a bedrock aquifer at a site near Blackwater Brook in Dover, New Hampshire. The primary focus ofthis study was the development of a model to assist in evaluating the area surrounding a planned water supply well where contaminants introduced at the land surface might be induced to flow towards a pumping well. Well logs and geophysical surveys used in this study included lithologic logs based on examination of cuttings obtained during drilling; conventional caliper and natural gamma logs; video camera and acoustic televiewer surveys; highresolution vertical flow measurements under ambient conditions and during pumping; and borehole fluid conductivity logs obtained after the borehole fluid was replaced with deionized water. These surveys were used for several applications: 1) to define a conceptual model of aquifer structure to be used in groundwater exploration; 2) to estimate optimum locations for test and observation wells; and 3) to delineate a wellhead protection area (WHPA) for a planned water supply well. Integration of borehole data with surface geophysical and geological mapping data indicated that the study site lies along a northeast-trending intensely fractured contact zone between surface exposures of quartz monzonite and metasedimentary rocks. Four of five bedrock boreholes at the site were estimated to produce more than 150 gallons per minute (gpm) (568 L/min) of water during drilling. Aquifer testing and other investigations indicated that water flowed to the test well along fractures parallel to the northeast-trending contact zone and along other northeast and north-northwest-trending fractures. Statistical plots of fracture strikes showed frequency maxima in the same northeast and north-northwest directions, although additional maxima occurred in other directions. Flowmeter surveys and borehole fluid conductivity logging after fluid replacement were used to identify water-producing zones in the boreholes; fractures associated with inflow into boreholes showed a dominant northeast orientation. Borehole fluid conductivity logging after fluid replacement also gave profiles of such water-quality parameters as fluid electrical conductivity (FEC), pH, temperature, and oxidation-reduction potential, strengthening the interpretation of crossconnection of boreholes by certain fracture zones. The results of this study showed that the application of these borehole geophysical techniques at the Blackwater Brook site led to an improved understanding of such parameters as fracture location, attitude, flow direction and velocity, and water quality; all of which are important in the determination of a WHPA.

Log Analyst↗
USGS1994

Reconnaissance geologic mapping of a portion of the rain‐forest‐covered Guiana Shield, Northwestern Brazil, using SIR-B and digital aeromagnetic data

This paper documents the result of an integrated analysis of spaceborne radar (SIR-B) and digital aeromagnetic data carried out in the heavily forested Guiana Shield. The objective of the research is to interpret the geophysical data base to its limit to produce a reconnaissance geologic map as an aid to ground work planning in a worst‐case setting. Linear geomorphic features were identified based on the interpretation of the SIR-B image. Digital manipulation of aeromagnetic data allowed the development of a color‐shaded relief map of reduced‐to‐pole magnetic anomalies, a terrace‐magnetization map, and a map showing the location of maximum values of the horizontal component of the pseudogravity gradient (magnetization boundary lines). The resultant end product was a reconnaissance geologic map where broad terrane categories were delineated and geologic faults with both topographic and magnetic expression were defined. The availability of global spaceborne radar coverage in the 1990s and the large number of existing digital aeromagnetic surveys in northwestern Brazil indicate that this approach can be potentially useful for reconnaissance geologic mapping elsewhere in the Guiana Shield.

Geophysics↗
USGS2012

Hydrostratigraphic interpretation of test-hole and surface geophysical data, Elkhorn and Loup River Basins, Nebraska, 2008 to 2011

The Elkhorn-Loup Model (ELM) was begun in 2006 to understand the effect of various groundwater-management scenarios on surface-water resources. During phase one of the ELM study, a lack of subsurface geological information was identified as a data gap. Test holes drilled to the base of the aquifer in the ELM study area are spaced as much as 25 miles apart, especially in areas of the western Sand Hills. Given the variable character of the hydrostratigraphic units that compose the High Plains aquifer system, substantial variation in aquifer thickness and characteristics can exist between test holes. To improve the hydrogeologic understanding of the ELM study area, the U.S. Geological Survey, in cooperation with the Nebraska Department of Natural Resources, multiple Natural Resources Districts participating in the ELM study, and the University of Nebraska-Lincoln Conservation and Survey Division, described the subsurface lithology at six test holes drilled in 2010 and concurrently collected borehole geophysical data to identify the base of the High Plains aquifer system. A total of 124 time-domain electromagnetic (TDEM) soundings of resistivity were collected at and between selected test-hole locations during 2008-11 as a quick, non-invasive means of identifying the base of the High Plains aquifer system. Test-hole drilling and geophysical logging indicated the base-of-aquifer elevation was less variable in the central ELM area than in previously reported results from the western part of the ELM study area, where deeper paleochannels were eroded into the Brule Formation. In total, more than 435 test holes were examined and compared with the modeled-TDEM soundings. Even where present, individual stratigraphic units could not always be identified in modeled-TDEM sounding results if sufficient resistivity contrast was not evident; however, in general, the base of aquifer [top of the aquifer confining unit (ACU)] is one of the best-resolved results from the TDEM-based models, and estimates of the base-of-aquifer elevation are in good accordance with those from existing test-hole data. Differences between ACU elevations based on modeled-TDEM and test-hole data ranged from 2 to 113 feet (0.6 to 34 meters). The modeled resistivity results reflect the eastward thinning of Miocene-age and older stratigraphic units, and generally allowed confident identification of the accompanying change in the stratigraphic unit forming the ACU. The differences in elevation of the top of the Ogallala, estimated on the basis of the modeled-TDEM resistivity, and the test-hole data ranged from 11 to 251 feet (3.4 to 77 meters), with two-thirds of model results being within 60 feet of the test-hole contact elevation. The modeled-TDEM soundings also provided information regarding the distribution of Plio-Pleistocene gravel deposits, which had an average thickness of 100 feet (30 meters) in the study area; however, in many cases the contact between the Plio-Pleistocene deposits and the overlying Quaternary deposits cannot be reliably distinguished using TDEM soundings alone because of insufficient thickness or resistivity contrast.

Nebraska↗
USGS1989

Summary geochemical maps of the Harrison 1° x 2° quadrangle, Arkansas and Missouri

This map is the first in a folio of maps of the Harrison 1° x 2° quadrangle, Arkansas and Missouri, prepared under the Conterminous United States Mineral Assessment Program. Additional maps showing various other geologic aspects of the Harrison quadrangle will be published as U.S. Geological Survey Miscellaneous Field Studies Maps bearing the same serial number with different letter suffixes (MF-1994-B, -C, and so on). Geochemical studies of the Harrison lo x 2° quadrangle, Arkansas and Missouri, are part of a joint multidisciplinary study by the U.S. Geological Survey; the Division of Geology and Land Survey, Missouri Department of Natural Resources; and the Arkansas Geological Commission. The objective of the joint study is to assess the mineral-resource potential of the area by integrated geologic, geochemical, and geophysical investigations.

Arkansas, Missouri↗
USGS1981

Summary of radiometric anomalies in Alaska

The gamma ray anomalies and their related geological settings shown on this map are a compilation from the NURE reconnaissance surveys (LKB Resources Inc., 1978a, 1978b, 1978c, 1979; Texas Instruments, Inc., 1977, 1978, U.S. Research and Development, 1976; Western Geophysical Company of American, 1980.)

Alaska↗
USGS1982

GLORIA sidescan and seismic data collected by the DESV STARELLA along the continental slope and upper continental rise of the Eastern United States in 1979

A cruise on the- DESV STARELLA was conducted between October 23. 1979, and November 8, 1979, by the U.S. Geologic.al Survey (USGS) in cooperation with the United Kingdom's Institute of Oceanographic Sciences (IOS). The purpose of the study was to gain an overview of the morphology of large areas of the Continental Slope and upper Continental Rise off the eastern ·united States. Sidescan-sonar and single-channel seismic-reflection data were collected along the tracklines. The ship's position. was monitored using LORAN_C and satellite navigation techniques. The sidescan data were collected using the !OS-developed Geologic Long­-Range Inclined Asdic, Mark II (GLORIA II) system. GLORIA was operated at either a 20-second or 40-second sweep, giving maximum slant-range distances of 15 or 30 kilometers, respectively, to each side of the towed fish. The sidescan data were collected on graphic recorders and analog tapes. The tapes were played onto photographic paper in a facsimile machine; then these prints were photographically stretched to produce approximately isometric images .. The images were not corrected for slant-range distortion. Mosaics at a scale of 1:250,000 (Mercator projection) were made from the photographic images. The seismic· data consist of 40-in 3 airgun and 10-kHz echo-sounder profiles. The airgun data were recorded on EPC recorders at both 8- and 4- second sweep rates. The 10-kHz echo-sounder data were recorded on a wet-paper recorder at a 2-second sweep rate. Approximately 4,820 km of seismic and sonar-data wera collected from four areas of interest and along the lines connecting those areas. Area 1 includes the Continental Slope and upper Rise seaward of Georges Bank, between Northeast Channel and Alvin Canyon. Numerous lines were run here, resulting in approximately 2,500 km of seismic data and complete and overlapping GLORIA coverage of the area. A similar survey, consisting of approximately 1 2 200 km of trackline, was run in area 2, which includes the Continental Slope and upper Rise seaward of the middle Atlantic states between Hudson Canyon and Baltimore Canyon. A single line, 250 km long, was run through area 3 along the base of the Continental Slope from Cape Hatteras to latitude 33°N. off North and South Carolina. Two parallel lines, totaling 870 km, were run through area 4 along the Blake Escarpment, from the Blake Spur south to latitude 27°40'N. One line was run along the top of the escarpment and the other was run along the base of the escarpment. All the data can be studied at the U.S. Geological Survey offices in Woods Hole, MA 02543. Microfilm copies of the sidescan-monitor record as well as the airgun and 10-kHz profiles can be purchased only from the National Geophysical Data Center, NOAA, Code E64, 325 Broadway, Boulder, CO 80303 (303/497-6338). Photographic copies of the GLORIA mosaics can also be obtained only from this address.

Open-File Report↗
USGS1961

An aeromagnetic profile from anchorage to Nome, Alaska

A total-intensity profile was obtained on a 500-mile flight by a U. S. Geological Survey airplane from Anchorage to Nome , Alaska , on May 4, 1954. The average flight altitude was 6,000 ft above sea level except over the Alaska Range where the flight altitude was 9,000 ft. This profile crossed eight of the major tectonic elements of Alaska at right angles to their trend and gives valuable regional information in an area where other geophysical and geological information is scarce or lacking. The profile has a net gradient downward to the northwest, most of which is ascribed to the component of the earth's main magnetic field along the flight traverse. The great variety of magnetic anomalies which are superimposed on this gradient originate from variations in lithology along the traverse. All the magnetic anomalies, except a large one over the Yukon River, are caused by magnetic rocks at or near the surface. The magnetic profile may be divided into four major segments and nine subsegments, each having a characteristic magnetic pattern. Most of these can be related to a tectonic unit. The large plutons of the Talkeetna geanticline are clearly defined by a group of anomalies having the highest amplitudes of any on the profile . The Matanuska geosyncline to the east is represented by a 25-mile section of sloping profile consistent with a thick sedimentary section but indicating that the geosyncline is comparatively narrow near Anchorage . The 200-mile central magnetic segment is relatively free from all but very minor anomalies. This segment includes the Alaska Range geosyncline, the Tanana geanticline, and the Kuskokwim geosyncline; showing only slight magnetic contrasts between each of these elements. The two geosynclines either have thick Mesozoic sedimentary sections or have underlying crystalline rocks which are low in magnetic susceptibility at shallow depths. The rocks of the geanticline have a low but not negligible magnetic susceptibility and are predominantly Paleozoic sedimentary rocks. A single 300-gamma anomaly on the west edge of the central segment is caused by a small, mafic intrusive body in the Paleozoic metamorphic rocks of Mt. Hurst. West of this anomaly the profile consists of a series of small sharp anomalies which are probably caused by Paleozoic metavolcanic rocks of the Ruby geanticline. The second largest anomaly on the profile is in the Koyukuk geosyncline over the Yukon River. The source is calculated to be more than a mile deep and may be an intrusive body at least 15 miles wide. This anomaly is flanked by 20-mile sections of flat or sloping profile which indicate areas of thick sedimentary rocks, particularly in the region west of the Yukon River. The 150-mile Norton Sound magnetic segment on the western end of the profile consists of many closely spaced anomalies produced by rocks which are either volcanic or similar to the Seward complex. Of the four Cenozoic basins or lowlands crossed by the profile , three are underlain by rocks of moderate to high magnetic susceptibility at shallow depths. These are the Cook Inlet basin, part of which overlaps rocks of the Talkeetna geanticline, the Innoko basin of central Alaska which overlies the rocks of the Ruby geanticline, and the Norton basin, in which sedimentary deposits are thin or absent. The fourth, the Minchumina basin, is underlain by the low-susceptibility rocks at the Tanana geanticline, which are also probably close to the surface.

Alaska↗
USGS2010

Helicopter electromagnetic and magnetic geophysical survey data, portions of the North Platte and South Platte Natural Resources Districts, western Nebraska, May 2009

This report is a release of digital data from a helicopter electromagnetic and magnetic survey that was conducted during June 2009 in areas of western Nebraska as part of a joint hydrologic study by the North Platte Natural Resource District (NRD), South Platte NRD, and U.S. Geological Survey (USGS). Flight lines for the survey totaled 937 line kilometers (582 line miles). The objective of the contracted survey, conducted by Fugro Airborne, Ltd., is to improve the understanding of the relation between surface-water and groundwater systems critical to developing groundwater models used in management programs for water resources. A unique aspect of the survey is the flight line layout. One set of flight lines was flown in a zig-zag pattern extending along the length of the previously collected airborne data. The success of this survey design depended on a well-understood regional hydrogeologic framework and model developed by the Cooperative Hydrologic Study of the Platte River Basin and the airborne geophysical data collected in 2008. Resistivity variations along lines could be related to this framework. In addition to these lines, more traditional surveys consisting of parallel flight lines, separated by about 400 meters were carried out for three blocks in the North Platte NRD, the South Platte NRD and in the area of Crescent Lakes. These surveys helped to establish the spatial variations of the resistivity of hydrostratigraphic units. An additional survey was flown over the Crescent Lake area. The objective of this survey, funded by the USGS Office of Groundwater, was to map shallow hydrogeologic features of the southwestern part of the Sand Hills that contain a mix of fresh to saline lakes.

Open-File Report↗
USGS1983

Structure, temperature, pressure, and salinity of Cenozoic aquifers of south Texas

A study of the hydrogeology of deep sedimentary basins using the Neogene deposits of the northern Gulf of Mexico basin as a model was initiated by the U.S. Geological Survey in the 1960's (Jones, 1969). This study led to investigations of geopressured-geothermal resources in this basin (Papadopulos and others, 1975; Wallace and others, 1979) and of the waste storage capabilities of the Wilcox Group in Texas (Jones and others, 1976). Techniques for delineating pressure, temperature, and salinity variations within the geologic framework were developed in conjunction with these and related studies. The purpose of this hydrologic atlas is to delineate the hydrogeology of the onshore Cenozoic aquifers of south Texas, using these techniques. The location of the study area in Texas is shown in figure 1. Hydrogeologic cross section A-A' is shown in figure 2. The surface geology of the area and the line of section A–A' are shown in figure 3. Geophysical logs of oil tests provided the framework for this section. Interpretations presented are based upon data from these logs; information from published ground water and geological reports; and structural and geologic interpretations from maps prepared by Peppard, Souders and Associates for the U.S. Geological Survey under Purchase Order Numbers 67482 and 67.483.

Texas↗
USGS2011

New land surface digital elevation model covers the Earth

Land surface elevation around the world is reaching new heights—as far as its description and measurement goes. A new global digital elevation model (DEM) is being cited as a significant improvement in the quality of topographic data available for Earth science studies. Land surface elevation is one of the Earth's most fundamental geophysical properties, but the accuracy and detail with which it has been measured and described globally have been insufficient for many large-area studies. The new model, developed at the U.S. Geological Survey's (USGS) EROS Data Center (EDC), has changed all that.

Eos, Earth and Space Science News↗
USGS2014

Annual rainfall and runoff in New England

This paper presents the results of studies of average rainfall and runoff, developed in the Office of the Division Engineer, New England Division, United States Corps of Engineers, in cooperation with the District Engineer, United States Geological Survey, and prepared in connection with flood‐control studies of the Connecticut and Merrimack River basins.

Connecticut, Maine, Massachusetts, New Hampshire, ↗
USGS2026

Cascadia Subduction Zone science: Call for the next generation community seismic velocity model

The Cascadia subduction zone (CSZ) hosts major seismic and tsunami hazards, yet key questions persist about the relationship between margin structure, fluid distribution, episodic tremor and slip, shallow megathrust behavior, shaking and tsunamigenesis, and the resulting hazard estimates. Addressing these problems requires an empirically grounded, three‐dimensional seismic velocity model to illuminate subsurface structure and properties and to provide a basis for geophysical studies such as earthquake simulations and ground‐motion estimation. In May 2024, the National Science Foundation‐funded Cascadia Region Earthquake Science Center (CRESCENT) community velocity model (CVM) working group, with U.S. Geological Survey and regional partners, convened a workshop to identify priorities for such a model. Participants emphasized the features necessary for addressing key science questions, including implementing findability, accessibility, interoperability, and reusability (FAIR) access, capturing along‐strike and along‐dip structural heterogeneity, resolving shallow offshore–onshore structure, constraining elastic properties and quantifying their uncertainties for numerical wave propagation simulations, their validation benchmarks, and supporting associated accurate earthquake ground‐motion simulations and hazard assessments. This article describes the priorities defined in the workshop, and a description of how, guided by these needs, CRESCENT plans to develop multiple generations of a CVM to advance CSZ science and improve seismic and tsunami hazard modeling across the Pacific Northwest. The CVM will span the CSZ from the surface to ∼100 km depth, offshore and east of the Cascades into Idaho (∼132°–110° W) and the southern and northern tectonic regime transitions (∼36°–52° N) to capture the entire tectonic system as well as its surroundings.

Cascadia Subduction Zone↗
USGS1984

Evaluation of the ground-water resources of coastal Georgia: preliminary report of the data available as of July 1983

A compilation of ground-water data that have been collected for nearly 100 years in the coastal area of Georgia is presented in this report. The compilation of pertinent data indicates what information is available for use in the evaluation of the ground-water resources of the 13 counties of coastal Georgia. Also included in this report is a fairly complete discussion of previous and ongoing investigations and monitoring networks, and an extensive list of references. Maps at 1:24,000 and 1:1,000,000 scales contain well locations and identifiers for all wells in the Ground Water Site Inventory (GWSI) data base of the National Water Data Storage and retrieval System (WATSTORE). Tabular summaries of selected site information from GWSI, including well identifiers and names, latitude-longitude location, depth of well, altitude of land surface, and use of water are presented. Water-use data from the National Water Use Data System, and water use for irrigation from the University of Georgia, Department of Agriculture survey, also are tabulated. Also included are pertinent information on geophysical surveys and data obtained, and proposed project activities, particularly test-monitor well drilling. The data in this report were collected and compiled as part of the cooperative activities between the U.S. Geological Survey and other agencies.

Georgia↗
USGS2014

A multiphased approach to groundwater investigations for the Edwards-Trinity and related aquifers in the Pecos County region, Texas

The Edwards-Trinity aquifer is a vital groundwater resource for agricultural, industrial, and public supply uses in the Pecos County region of western Texas. Resource managers would like to understand the future availability of water in the Edwards-Trinity aquifer in the Pecos County region and the effects of the possible increase or temporal redistribution of groundwater withdrawals. To provide resource managers with that information, the U.S. Geological Survey (USGS), in cooperation with the Middle Pecos Groundwater Conservation District, Pecos County, City of Fort Stockton, Brewster County, and Pecos County Water Control and Improvement District No. 1, completed a three-phase study of the Edwards-Trinity and related aquifers in parts of Brewster, Jeff Davis, Pecos, and Reeves Counties. The first phase was to collect groundwater, surface-water, geochemical, geophysical, and geologic data in the study area and develop a geodatabase of historical and collected data. Data compiled in the first phase of the study were used to develop the conceptual model in the second phase of the study. The third phase of the study involved the development and calibration of a numerical groundwater-flow model of the Edwards-Trinity aquifer to simulate groundwater conditions based on various groundwater-withdrawal scenarios. Analysis of well, geophysical, geochemical, and hydrologic data contributed to the development of the conceptual model in phase 1. Lithologic information obtained from well reports and geophysical data was used to describe the hydrostratigraphy and structural features of the groundwater-flow system, and aquifer-test data were used to estimate aquifer hydraulic properties. Geochemical data were used to evaluate groundwater-flow paths, water-rock interaction, aquifer interaction, and the mixing of water from different sources in phase 2. Groundwater-level data also were used to evaluate aquifer interaction, as well as to develop a potentiometric-surface map, delineate regional groundwater divides, and describe regional groundwater-flow paths. During phase 3, the data collected and compiled along with the conceptual information in the study area were incorporated into a numerical groundwater-flow model to evaluate the sustainability of recent (2008) and projected water-use demands on groundwater resources in the study area.

Texas↗
USGS2025

Structural setting and geothermal potential of northeastern Reese River Valley, north-central Nevada: Highly prospective detailed study site for the INGENIOUS project

The northeastern part of the Reese River basin situated ~15 km southeast of Battle Mountain, Nevada, scored highly in the Nevada geothermal play fairway analysis (PFA) for hosting potential hidden geothermal systems. This site (also referred to as Argenta Rise) was therefore chosen for detailed study in the INGENIOUS project (INnovative Geothermal Exploration through Novel Investigations Of Undiscovered Systems). The high PFA scores resulted primarily from favorable structural settings (e.g., fault intersections and pull aparts) with relatively high slip rates on Quaternary faults. The INGENIOUS project is utilizing additional parameters and more rigorous analytical techniques to further advance exploration at this site. This includes integration of geological (e.g., Quaternary fault mapping) and new geophysical datasets (e.g., gravity, magnetics, MT data, and five reprocessed seismic reflection profiles) to build a structural model and to identify specific favorable sites for potential geothermal upwellings. Two-meter temperature surveys were also conducted in the area (139 measurements). This part of north-central Nevada is characterized by systems of intersecting northerly and ENE-striking faults within the broader Humboldt structural zone, a poorly understood belt of ENE-striking faults and relatively high heat flow extending across northern Nevada. Kinematic analysis of exposed fault surfaces shows that ENE-striking faults have accommodated sinistral-normal slip, and normal slip characterizes N- to NNE-striking faults. Northeastern Reese River Valley lies within a broad left step between major ENE-striking fault zones on the northern flanks of the Argenta Rim and Shoshone Range and thus corresponds to a broad pull-apart in the ENE-striking sinistral-normal fault system. Notably, the nearby Beowawe geothermal system in Whirlwind Valley (with abundant sinter, hot springs, and a geothermal power plant) occupies a fault intersection in a relatively small left step in a major ENE-striking sinistral-normal fault and may serve as an analogue for a potential hidden system in northeastern Reese River Valley. Existing geological maps, high-resolution lidar, and seismic reflection data demonstrate that northeastern Reese River Valley is structurally complex with multiple intersections between the ENE- and N- to NNE-striking fault systems. Some of these fault intersections correspond to low resistivity anomalies, magnetic lows, and/or very subtle 2-m temperature anomalies, which may indicate hidden geothermal upwellings. Three-dimensional modeling and temperature-gradient drilling are planned to further evaluate these sites for geothermal activity.

Nevada↗
USGS2011

Physical properties of sediment from the Mount Elbert Gas Hydrate Stratigraphic Test Well, Alaska North Slope

This study characterizes cored and logged sedimentary strata from the February 2007 BP Exploration Alaska, Department of Energy, U.S. Geological Survey (BPXA-DOE-USGS) Mount Elbert Gas Hydrate Stratigraphic Test Well on the Alaska North Slope (ANS). The physical-properties program analyzed core samples recovered from the well, and in conjunction with downhole geophysical logs, produced an extensive dataset including grain size, water content, porosity, grain density, bulk density, permeability, X-ray diffraction (XRD) mineralogy, nuclear magnetic resonance (NMR), and petrography. This study documents the physical property interrelationships in the well and demonstrates their correlation with the occurrence of gas hydrate. Gas hydrate (GH) occurs in three unconsolidated, coarse silt to fine sand intervals within the Paleocene and Eocene beds of the Sagavanirktok Formation: Unit D-GH (614.4 m-627.9 m); unit C-GH1 (649.8 m-660.8 m); and unit C-GH2 (663.2 m-666.3 m). These intervals are overlain by fine to coarse silt intervals with greater clay content. A deeper interval (unit B) is similar lithologically to the gas-hydrate-bearing strata; however, it is water-saturated and contains no hydrate. In this system it appears that high sediment permeability (k) is critical to the formation of concentrated hydrate deposits. Intervals D-GH and C-GH1 have average "plug" intrinsic permeability to nitrogen values of 1700 mD and 675 mD, respectively. These values are in strong contrast with those of the overlying, gas-hydrate-free sediments, which have k values of 5.7 mD and 49 mD, respectively, and thus would have provided effective seals to trap free gas. The relation between permeability and porosity critically influences the occurrence of GH. For example, an average increase of 4% in porosity increases permeability by an order of magnitude, but the presence of a second fluid (e.g., methane from dissociating gas hydrate) in the reservoir reduces permeability by more than an order of magnitude.

Alaska↗