Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Complexity”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57Linked to original sources

Multi-stage origin of the Coast Range ophiolite, California: Implications for the life cycle of supra-subduction zone ophiolites

The Coast Range ophiolite of California is one of the most extensive ophiolite terranes in North America, extending over 700 km from the northernmost Sacramento Valley to the southern Transverse Ranges in central California. This ophiolite, and other ophiolite remnants with similar mid-Jurassic ages, represent a major but short-lived episode of oceanic crust formation that affected much of western North America. The history of this ophiolite is important for models of the tectonic evolution of western North America during the Mesozoic, and a range of conflicting interpretations have arisen. Current petrologic, geochemical, stratigraphic, and radiometric age data all favor the interpretation that the Coast Range ophiolite formed to a large extent by rapid extension in the forearc region of a nascent subduction zone. Closer inspection of these data, however, along with detailed studies of field relationships at several locales, show that formation of the ophiolite was more complex, and requires several stages of formation. Our work shows that exposures of the Coast Range ophiolite preserve evidence for four stages of magmatic development. The first three stages represent formation of the ophiolite above a nascent subduction zone. Rocks associated with the first stage include ophiolite layered gabbros, a sheeted complex, and volcanic rocks vith arc tholeiitic or (roore rarely) low-K calc-alkaline affinities. The second stage is characterized by intrusive wehrlite-clinopyroxenite complexes, intrusive gabbros, Cr-rich diorites, and volcanic rocks with high-Ca boninitic or tholeiitic ankaramite affinities. The third stage includes diorite and quartz diorite plutons, felsic dike and sill complexes, and calc-alkaline volcanic rocks. The first three stages of ophiolite formation were terminated by the intrusion of mid-ocean ridge basalt dikes, and the eruption of mid-ocean ridge basalt or ocean-island basalt volcanic suites. We interpret this final magmatic event (MORB dikes) to represent the collision of an active spreading ridge. Subsequent reorganization of relative plate motions led to sinistral transpression, along with renewed subduction and accretion of the Franciscan Complex. The latter event resulted in uplift and exhumation of the ophiolite by the process of accretionary uplift.

California↗

Reconnaissance geologic map of the Dixonville 7.5' quadrangle, Oregon

The Dixonville 7.5 minute quadrangle is situated near the edge of two major geologic and tectonic provinces the northernmost Klamath Mountains and the southeastern part of the Oregon Coast Ranges (Figure 1). Rocks of the Klamath Mountains province that lie within the study area include ultramafic, mafic, intermediate and siliceous igneous types (Diller, 1898, Ramp, 1972, Ryberg, 1984). Similar rock associations that lie to the southwest yield Late Jurassic and earliest Cretaceous radiometric ages (Dott, 1965, Saleeby, et al., 1982, Hotz, 1971, Harper and Wright, 1984). These rocks, which are part of the Western Klamath terrane (Western Jurassic belt of (Irwin, 1964), are considered to have formed within an extensive volcanic arc and rifted arc complex (Harper and Wright, 1984) that lay along western North America during the Late Jurassic (Garcia, 1979, Garcia, 1982, Saleeby, et al., 1982, Ryberg, 1984). Imbricate thrust faulting and collapse of the arc during the Nevadan orogeny, which ranged in age between about 150 to 145 Ma in the Klamath region (Coleman, 1972, Saleeby, et al., 1982, Harper and Wright, 1984) was syntectonic with, or closely followed by deposition of the volcano-lithic clastic rocks of the Myrtle Group. The Myrtle Group consists of Upper Jurassic and Lower to middle Cretaceous turbidity and mass flow deposits considered to be either arc basin and/or post-orogenic flysh basins that were syntectonic with the waning phases of arc collapse (Imlay et al., 1959, Ryberg, 1984, Garcia, 1982, Roure.and Blanchet, 1983). The intermediate and mafic igneous rocks of the Rogue arc and the pre-Nevadan sedimentary cover (the Galice Formation, (Garcia, 1979) are intruded by siliceous and intermediate plutonic rocks principally of quartz diorite and granodiorite composition (Dott, 1965, Saleeby, et al., 1982, Garcia, 1982, Harper and Wright, 1984). The plutonic rocks are locally tectonized into amphibolite, gneiss, banded gneiss and augen gneiss. Similar metamorphic rocks have yielded metamorphic ages of 165 to 150 Ma (Coleman, 1972, Hotz, 1971, Saleeby, et al., 1982, Coleman and Lanphere, 1991). The Jurassic arc rocks and sedimentary cover occur as a tectonic outlier in this region (Figure 2) as they are bound to the northwest and southeast by melange, broken formation and semi-schists of the Dothan Formation and Dothan Formation(?) that are considered part of a late Mesozoic accretion complex (Ramp, 1972, Blake, et al., 1985). The plutonism that accompanied arc formation and tectonic collapse of the arc does not intrude the structurally underlying Dothan Formation, indicating major fault displacements since the Early Cretaceous. Semischistose and schistose rocks of the accretion complex have yielded metamorphic ages of around 125-140 Ma where they have been studied to the southwest (Coleman and Lanphere, 1971, Dott, 1965, Coleman, 1972). These rocks were unroofed and unconformably overlain by marine deposits by late early Eocene time (Baldwin, 1974). The early Tertiary history of this region is controversial. The most recent interpretation is that during the Paleocene and early Eocene the convergent margin was undergoing transtension or forearc extension as suggested by the voluminous extrusion of pillow basalt and related dike complexes (Wells, et al., 1984, Snavely, 1987). This episode was followed shortly by thrust and strike-slip faulting in the late early Eocene (Ryberg, 1984). During the Eocene, the Mesozoic convergent margin association of arc, clastic basin, and accretion complex was partly unroofed and faulted against early Cenozoic rocks of the Oregon Coast Ranges (Ramp, 1972, Baldwin, 1974, Champ, 1969, Ryberg, 1984). Faults that are typical of this period of deformation include high-angle reverse faults with a very strong component of strike-slip displacement characterized by a low-angle rake of striae. Thrust and oblique-slip faults are ubiquitous in early Tertiary rocks to the northwest (Ryberg, 1984, Niem and Niem, 1990). The late Mesozoic and early Cenozoic arc and forearc rocks are unconformably overlain to the east by the late Eocene and younger, mainly continental fluvial deposits and pyroclastic flows of the Cascade arc (Peck, et al., 1964, Baldwin, 1974, Walker and MacLeod, 1991). Minor fossiliferous shallow marine sandstone is locally present. The volcanic sequence consists of a homoclinal section of about 1 to 2 kilometers of andesitic to rhyolitic flows and ash flow tuff. The section is gently east-tilted and is slightly disrupted by NE trending faults with apparent normal separation.

Oregon↗

Preliminary geologic map of the Murrieta 7.5' quadrangle, Riverside County, California

The Murrieta quadrangle is located in the northern part of the Peninsular Ranges Province and includes parts of two structural blocks, or structural subdivisions of the province. The quadrangle is diagonally crossed by the active Elsinore fault zone, a major fault zone of the San Andreas fault system, and separates the Santa Ana Mountains block to the west from the Perris block to the east. Both blocks are relatively stable internally and within the quadrangle are characterized by the presence of widespread erosional surfaces of low relief. The Santa Ana Mountains block, in the Murrieta quadrangle, is underlain by undifferentiated, thick-layered, granular, impure quartzite and well-layered, fissile, phyllitic metamorphic rock of low metamorphic grade. Both quartzite and phyllitic rocks are Mesozoic. Unconformably overlying the metamorphic rocks are remnants of basalt flows having relatively unmodified flow surfaces. The age of the basalt is about 7-8Ma. Large shallow depressions on the surface of the larger basalt remnants form vernal ponds that contain an endemic flora. Beneath the basalt the upper part of the metamorphic rocks is deeply weathered. The weathering appears to be the same as the regional Paleocene saprolitic weathering in southern California. West of the quadrangle a variable thickness sedimentary rock, physically resembling Paleogene rocks, occurs between the basalt and metamorphic rock. Where not protected by the basalt, the weathered rock has been removed by erosion. The dominant feature on the Perris block in the Murrieta quadrangle is the south half of the Paloma Valley ring complex, part of the composite Peninsular Ranges batholith. The complex is elliptical in plan view and consists of an older ring-dike with two subsidiary short-arced dikes that were emplaced into gabbro by magmatic stoping. Small to large stoped blocks of gabbro are common within the ring-dikes. A younger ring-set of hundreds of thin pegmatite dikes occur largely within the central part of the complex. These pegmatite dikes were emplaced into a domal fracture system, apparently produced by cauldron subsidence, and include in the center of the complex, a number of flat-floored granophyre bodies. The granophyre is interpreted to be the result of pressure quenching of pegmatite magma. Along the eastern edge of the quadrangle is the western part of a large septum of medium metamorphic grade Mesozoic schist. A dissected basalt flow caps the Hogbacks northeast of Temecula, and represents remnants of a channel filling flow. Beneath the basalt is a thin deposit of stream gravel. Having an age of about 10Ma, this basalt is about 2-3Ma older than the basalt flows in the Santa Ana Mountains. The Elsinore fault zone forms a complex of pull-apart basins. The west edge of the fault zone, the Willard Fault, is marked by the high, steep eastern face of the Santa Ana Mountains. The east side of the zone, the Wildomar Fault, forms a less pronounced physiographic step. In the center of the quadrangle a major splay of the fault zone, the Murrieta Hot Springs Fault, strikes east. Branching of the fault zone causes the development of a broad alluvial valley between the Willard Fault and the Murrieta Hot Springs Fault. All but the axial part of the zone between the Willard and Wildomar Faults consist of dissected Pleistocene sedimentary units. The axial part of the zone is underlain by Holocene and latest Pleistocene sedimentary units.

California↗

Mercury in Sediment, Water, and Biota of Sinclair Inlet, Puget Sound, Washington, 1989-2007

Historical records of mercury contamination in dated sediment cores from Sinclair Inlet are coincidental with activities at the U.S. Navy Puget Sound Naval Shipyard; peak total mercury concentrations occurred around World War II. After World War II, better metallurgical management practices and environmental regulations reduced mercury contamination, but total mercury concentrations in surface sediment of Sinclair Inlet have decreased slowly because of the low rate of sedimentation relative to the vertical mixing within sediment. The slopes of linear regressions between the total mercury and total organic carbon concentrations of sediment offshore of Puget Sound urban areas was the best indicator of general mercury contamination above pre-industrial levels. Prior to the 2000-01 remediation, this indicator placed Sinclair Inlet in the tier of estuaries with the highest level of mercury contamination, along with Bellingham Bay in northern Puget Sound and Elliott Bay near Seattle. This indicator also suggests that the 2000/2001 remediation dredging had significant positive effect on Sinclair Inlet as a whole. In 2007, about 80 percent of the area of the Bremerton naval complex had sediment total mercury concentrations within about 0.5 milligrams per kilogram of the Sinclair Inlet regression. Three areas adjacent to the waterfront of the Bremerton naval complex have total mercury concentrations above this range and indicate a possible terrestrial source from waterfront areas of Bremerton naval complex. Total mercury concentrations in unfiltered Sinclair Inlet marine waters are about three times higher than those of central Puget Sound, but the small numbers of samples and complex physical and geochemical processes make it difficult to interpret the geographical distribution of mercury in marine waters from Sinclair Inlet. Total mercury concentrations in various biota species were compared among geographical locations and included data of composite samples, individual specimens, and caged mussels. Total mercury concentrations in muscle and liver of English sole from Sinclair Inlet ranked in the upper quarter and third, respectively, of Puget Sound locations. For other species, concentrations from Sinclair Inlet were within the mid-range of locations (for example, Chinook salmon). Total mercury concentrations of the long-lived and higher trophic rockfish in composites and individual specimens from Sinclair Inlet tended to be the highest in Puget Sound. For a given size, sand sole, graceful crab, staghorn sculpin, surf perch, and sea cucumber individuals collected from Sinclair Inlet had higher total mercury concentrations than individuals collected from non-urban estuaries. Total mercury concentrations in individual English sole and ratfish were not significantly different than in individuals of various sizes collected from either urban or non-urban estuaries in Puget Sound. Total mercury concentrations in English sole collected from Sinclair Inlet after the 2000-2001 dredging appear to have lower total mercury concentrations than those collected before (1996) the dredging project. The highest total mercury concentrations of mussels caged in 2002 were not within the Bremerton naval complex, but within the Port Orchard Marina and inner Sinclair Inlet.

Open-File Report↗

Summary of the stratigraphy and structural elements related to plate convergence of the Quetta-Muslim Bagh-Sibi region, Balochistan, west-central Pakistan

Obduction of an ophiolite complex onto the northwestern continental margin of the India plate occurred during the Late Cretaceous to early Paleocene, followed by collision of the ophiolitic complex of the India plate with the Eurasia plate in the Eocene. Lower Eocene marine strata overlie the ophiolitic complex suggesting that suturing was completed by early Eocene time. The Quetta-Muslim Bagh-Sibi region is a structurally complex area within west-central Pakistan characterized by broad and tight folds, and reverse, thrust, and strike-slip faults. In order to understand this complex deformation, we have divided this region into five structural domains which are separated by four major boundary faults formed during four major periods of deformation related to oblique convergence of the India and Eurasia plates. The five structural domains are (1) a foredeep, (2) a foreland fold-and-thrust belt, (3) a major deep trough that formed within the foreland fold-and-thrust belt and filled with collision molasse, (4) a thick flysch deposit, and (5) a subduction-obduction and related igneous rock terrane on the margin of the Eurasia plate (Afghan block). The four major faults that bound the structural terrane are the Frontal (F), Ghazaband-Zhob (GZ), Gwal-Bagh (GB), and Chaman (C) faults. Four major periods of deformation are recognized: (1) emplacement of ophiolitic rocks onto the continental margin of the India plate; (2) convergence of the India-Eurasia plates; (3) deposition of Tertiary-Quaternary molasse units followed by major folding and thrusting, and formation of strike-slip faults; and (4) deposition of Pleistocene molasse units with subsequent folding, thrusting, and strike-slip motion that continues to the present.

Open-File Report↗

Behavior, passage, and downstream migration of juvenile Chinook salmon from Detroit Reservoir to Portland, Oregon, 2014–15

An evaluation was conducted to estimate dam passage survival of juvenile Chinook salmon ( Oncorhynchus tshawytscha ) at Detroit Dam during a period of spill. To estimate dam passage survival, we used a paired-release recapture study design and released groups of tagged fish upstream (997 fish) and downstream (625 fish) of Detroit Dam. A total of 43 fish (6.8 percent) passed Detroit Dam from the upstream release group and passage occurred through regulating outlets (54.8 percent), spill bays (31.0 percent), and turbines (14.3 percent). We do not present dam passage survival estimates from 2014 because these estimates would have been highly uncertain due to the low number of fish that passed Detroit Dam during the study. Secondary objectives were addressed using data collected from tagged fish that were released at the downstream release site. Juvenile salmonids have multiple passage options at the Bennett Dam complex, which includes a series of dams and braided channels. A pair of Passive Integrated Transponder (PIT) monitoring arrays were installed at Upper Bennett Dam and in the Stayton Canal by the U.S. Army Corps of Engineers and the Oregon Department of Fish and Wildlife during 2014. We deployed acoustic telemetry hydrophones near these arrays to detect acoustic-tagged fish from our study and used these detections to quantify proportions of tagged fish passing through the two routes. About one-fourth (0.257) of the tagged fish that were released downstream of Big Cliff Dam were detected on the new PIT tag array while passing the Bennett Dam complex. A total of 402 acoustic-tagged fish were detected at the complex and many (248 fish; 62 percent) eventually entered the Stayton Canal. Median residence time in the canal was 6.5 hours, but 12.7 percent of the fish had extended residence times (7–37 days). Passage also was monitored at the Sullivan Project at Willamette Falls and about 40 percent (0.398) of the tagged fish passing the project were detected on the PIT tag array. A Cormack-Jolly-Seber mark-recapture model was developed to provide reach-specific survival estimates for juvenile Chinook salmon. A portion of the tagged population overwintered in the Willamette River Basin and outmigrated several months after release. As a result, survival estimates from the model would have been negatively biased by factors such as acoustic tag failure and tag loss. Data from laboratory studies were incorporated into the model to provide survival estimates that accounted for these factors. In the North Santiam River between Minto Dam and the Bennett Dam complex, a distance of 37.2 kilometers, survival was estimated to be 0.844 (95-percent confidence interval 0.795–0.893). The survival estimate for the 203.7 kilometer reach between the Bennett Dam complex and Portland, Oregon, was 0.279 (95-percent confidence interval 0.234–0.324), and included portions of the North Santiam, Santiam, and Willamette Rivers. The cumulative survival estimate in the 240.9 kilometer reach from the Minto Dam tailrace to Portland was 0.236 (95-percent confidence interval 0.197–0.275).

Oregon↗

Reconnaissance geology of the Precambrian rocks in the Ayn Qunay quadrangle, Kingdom of Saudi Arabia

The Aya Qunay quadrangle covers an area of 2833 sq km in central Saudi Arabia, Only the western edge of the quadrangle is underlain by Precambrian rocks, which were the subject of this investigation. Toward the east the Precambrian rocks are unconformably overlain by Permian and younger sedimentary rocks. The Permian rocks at the west edge of the Ayn Qunay quadrangle consist mainly of a granitic intrusive complex of batholithic dimensions. Parts of the eastern edge of the granitic complex are exposed just west of the overlying Khuff Formation of Permian age, where biotite-hornblende granite of the complex intrudes chlorite-sericite schist of the Precambrian Bi'r Khountina Group. The biotite-hornblende granite of the complex also intrudes plutons of diorite, gabbro, and pyroxenite and is itself intruded by granite porphyry, thereby indicating some difference in age between the granitic rocks in the complex. A sequence of metamorphosed volcanic rocks composed mainly of andesite, rhyolite, and kindred rocks, and called the Halaban Group, is older than the Bi'r Khountina Group. Relations between the Halaban and a gray hornblende-biotite granite gneiss are uncertain, but the gneiss may be older than the Halaban. The few observed contacts disclosed parallel foliation in the two units, but the foliation may have been imposed after the Halaban was deposited on the granite gneiss. Two major left-lateral faults extend west-northwest across the Precambrian rocks but are not in the Permian rocks. These faults parallel to the Najd fault zone found farther south. Seemingly they correlate in time with early movements on the Najd fault zone, but not with the latest. Saprolitic material-of variable thickness is present on the upper surface of the Precambrian rocks beneath the Khuff Formation at many places. Where the Khuff Formation has been removed by erosion, the saprolite is also stripped away. The weathering probably took place in pre-Khuff time. No ancient mines or prospects were seen in the Precambrian rocks; however, a notable positive anomaly for tungsten in concentrates is associated with a small prominence of granite porphyry 35 km southwest of Ayn Qunay. Further investigation of the porphyry should be undertaken to learn the amount of scheelite at this locality.

Open-File Report↗

Gravity profiles across the Uyaijah Ring structure, Kingdom of Saudi Arabia

Three detailed gravity profiles across parts of the Uyaijah ring structure have been completed using an average station spacing of 260 M (giving a total of 217 gravity stations) and level surveys for elevation control. When combined with regional gravity-anomaly data, the profiles are adequate for construction of a structural model of the ring complex based on gravity models. The resulting structural model, based on profile fits to gravity responses of three-dimensional models and excess-mass calculations, gives a depth estimate to the base of the complex of 4.75 km. The contacts of the complex are inferred to be steeply dipping inward along the southwest margin of the structure. To the north and east, however, the basal contact of the complex dips more gently inward (about 30 degrees). The ring structure appears to be composed of three laccolith-shaped plutons; two are granitic in composition and make up about 85 percent of the volume of the complex, and one is granodioritic and comprises the remaining 15 percent. The source area for the plutons appears to be in the southwest quadrant of the Uyaijah ring structure. A northwest-trending shear zone cuts the northern half of the structure and contains mafic dikes that have a small but identifiable gravity-anomaly response. The structural model agrees with models derived from geological interpretation except that the estimated depth to which the structure extends is decreased considerably by the gravity results.

Open-File Report↗

Detrital zircon geochronology of Cretaceous and Paleogene strata across the south-central Alaskan convergent margin

Ages of detrital zircons are reported from ten samples of Lower Cretaceous to Paleogene metasandstones and sandstones from the Chugach Mountains, Talkeetna Mountains, and western Alaska Range of south-central Alaska. Zircon ages are also reported from three igneous clasts from two conglomerates. The results bear on the regional geology, stratigraphy, tectonics, and mineral resource potential of the southern Alaska convergent margin. Chugach Mountains - The first detrital zircon data are reported here from the two main components of the Chugach accretionary complex - the inboard McHugh Complex and the outboard Valdez Group. Detrital zircons from sandstone and two conglomerate clasts of diorite were dated from the McHugh Complex near Anchorage. This now stands as the youngest known part of the McHugh Complex, with an inferred Turonian (Late Cretaceous) depositional age no older than 91-93 Ma. The zircon population has probability density peaks at 93 and 104 Ma and a smattering of Early Cretaceous and Jurassic grains, with nothing older than 191 Ma. The two diorite clasts yielded Jurassic U-Pb zircon ages of 179 and 181 Ma. Together, these findings suggest a Mesozoic arc as primary zircon source, the closest and most likely candidate being the Wrangellia composite terrane. The detrital zircon sample from the Valdez Group contains zircons as young as 69 and 77 Ma, consistent with the previously assigned Maastrichtian to Campanian (Late Cretaceous) depositional age. The zircon population has peaks at 78, 91, 148, and 163 Ma, minor peaks at 129, 177, 330, and 352 Ma, and no concordant zircons older than Devonian. A granite clast from a Valdez Group conglomerate yielded a Triassic U-Pb zircon age of 221 Ma. Like the McHugh Complex, the Valdez Group appears to have been derived almost entirely from Mesozoic arc sources, but a few Precambrian zircons are also present. Talkeetna Mountains - Detrital zircons ages were obtained from southernmost metasedimentary rocks of the Talkeetna Mountains (schist of Hatcher Pass) and, immediately to the south, the northernmost sedimentary sequence of the Matanuska forearc basin (Arkose Ridge Formation). Detrital zircons from the Paleogene Arkose Ridge Formation are as young as 61 and 70 Ma; the population is dominated by a single Late Cretaceous peak at 76 Ma; the oldest zircon is 181 Ma. Sedimentological evidence clearly shows that the conglomeratic Arkose Ridge Formation was derived from the Talkeetna Mountains; our detrital zircon data support this inference. Zircons dated at ca. 90 Ma in the Arkose Ridge sample suggest that buried or unmapped plutons of this age may exist in the Talkeetnas. This is a particularly interesting age as it corresponds to the age of the supergiant Pebble gold-molybdenum-copper porphyry prospect near Iliamna and suggests a new area of prospectivity for Pebble-type deposits. The schist of Hatcher Pass, which was previously assigned a Jurassic depositional age, yielded surprisingly young Late Cretaceous detrital zircons, the youngest at 75 Ma. The probability density curve has four Cretaceous peaks from 76 to 102 Ma, a pair of Late Jurassic peaks at 155 and 166 Ma, three Early Jurassic to Late Triassic peaks at 186, 197, and 213 Ma, minor Carboniferous peaks at 303 and 346 Ma, and a minor Paleoproterozoic peak at 1828 Ma. The schist of Hatcher Pass was largely derived from Mesozoic arc sources, most likely the Wrangellia composite terrane, with some contribution from one or more older, inboard sources, probably including the Yukon-Tanana terrane. We postulate that the schist of Hatcher Pass represents metamorphosed rocks of the Valdez Group that were subducted and then exhumed along the Chugach terrane's 'backstop' during Paleogene transtension. Western Alaska Range - Six detrital zircon samples were collected from a little studied belt of turbidites in Tyonek quadrangle on strike with the Kahiltna assemblage of the central Alaska Range.

Alaska↗

Porphyry copper assessment of western Central Asia

The U.S. Geological Survey conducted an assessment of resources associated with porphyry copper deposits in the western Central Asia countries of Kyrgyzstan, Uzbekistan, Kazakhstan, and Tajikistan and the southern Urals of Kazakhstan and Russia as part of a global mineral resource assessment. The purpose of the study was to (1) delineate permissive areas (tracts) for undiscovered porphyry copper deposits; (2) compile a database of known porphyry copper deposits and significant prospects; (3) where data permit, estimate numbers of undiscovered deposits within those permissive tracts; and (4) provide probabilistic estimates the amounts of copper (Cu), molybdenum (Mo), gold (Au), and silver (Ag) that could be contained in those undiscovered deposits. Western Central Asia, a region diverse in its geologic complexity, is situated north of the Tarim and North China tectonic blocks and sandwiched between the East European and Siberian cratons. The Ural Mountains form the western margin of the region; the southern margin is formed by the high-standing ranges that make up the Tian Shan mountain range in the border regions of Kazakhstan, Kyrgyzstan, and western China, where the effects of collisional tectonics are well displayed. The tectonic collage that makes up the core of western Central Asia is perhaps the geologically least understood part of the region. There is broad agreement that the early Paleozoic is made up of tectonically juxtaposed blocks that vary from Precambrian-cored microcontinents to magmatic arc and related complexes to subduction-related accretionary complexes. The rudiments of an incipient, contiguous single Kazakhstan block were formed by the end of the Silurian. In the middle to late Paleozoic, the block was unconformably superposed by two large, nested magmatic-arc belts, one Devonian, the other Carboniferous. Both magmatic-arc complexes were folded into a horseshoe-shaped, southeast-opening orocline in response to the final collisions of the various surrounding cratonic blocks with the Kazakhstan block. Additional deformation in the upper Cenozoic derived from the collision of India and China significantly redistributed fragments of the various mosaicked blocks, particularly in the central and southern parts of the western Central Asian region. Porphyry copper deposits are associated with many of the magmatic-arc fragments and belts throughout the geologically complex region, and economically important deposits are found in arc sequences of all Paleozoic Periods. The economically most productive arcs are Carboniferous. The assessment includes a discussion of the tectonic and geologic setting of porphyry copper deposits in western Central Asia (chapter 1), an application of remote sensing data for hydrothermal alteration mapping as a tool for porphyry copper assessment in the region (chapter 2), and a probabilistic assessment of undiscovered porphyry copper resources in four areas that represent Ordovician and Late Paleozoic (Carboniferous-Permian) magmatic arcs (chapter 3). The principal litho-tectonic terrane concept used to delineate permissive tracts was that of a magmatic arc that formed in the subduction boundary zone above a subducting plate. Eight permissive tracts are delineated on the basis of mapped and inferred subsurface distributions of igneous rocks assigned to magmatic arcs of specified age ranges that define areas where the occurrence of porphyry copper deposits within 1 kilometer of the Earth’s surface is possible. These tracts range in area from about 8,000 to 200,000 square kilometers and host 18 known porphyry copper deposits that contain about 54 million metric tons of copper. Available data included geologic maps, the distribution of significant porphyry copper occurrences and potentially related deposit types, the distribution of hydrothermal alteration patterns that are consistent with porphyry copper mineralization, and information on possible subsurface extensions of permissive rocks. On the basis of analyses of these data, the assessment team estimated a mean of 25 undiscovered porphyry copper deposits for the study area. Estimates of numbers of undiscovered deposits were combined with grade and tonnage models in a Monte Carlo simulation to yield a mean estimate of 95 million metric tons of copper in undiscovered porphyry copper deposits; this represents about twice the amount of identified porphyry copper resources (54 million metric tons). Detailed descriptions of each permissive tract, including the rationales for delineation and assessment, are given in appendixes, along with a geographic information system (GIS) that includes permissive tract boundaries, point locations of known porphyry copper deposits and significant occurrences, and hydrothermal alteration data based on analysis of remote sensing data.

Ural Mountains↗

Platinum-group elements in southern Africa: mineral inventory and an assessment of undiscovered mineral resources

The platinum-group elements, platinum, palladium, rhodium, ruthenium, iridium, and osmium, possess unique physical and chemical characteristics that make them indispensable to modern technology and industry. However, mineral deposits that are the main sources of these elements occur only in three countries in the world, raising concerns about potential disruption in mineral supply. Using information in the public domain, mineral resource and reserve information has been compiled for mafic and ultramafic rocks in South Africa and Zimbabwe that host most of the world’s platinum-group element resources. As of 2012, exploration and mining companies have delineated more than 20 billion metric tons of mineralized rock containing 42,000 metric tons of platinum, 29,000 metric tons of palladium, and 5,200 metric tons of rhodium, primarily in mafic and ultramafic intrusions of the Bushveld Complex and the Great Dyke, in southern Africa. Additional mineralized rock is likely to occur in extensions to the well-explored and characterized volumes of mineralized rock. Underexplored extensions of stratabound platinum-group element (PGE) deposits in the Bushveld Complex in South Africa may contain 65,000 metric tons of platinum, palladium, and rhodium to a depth of 3 km. Rocks enriched in PGE, which occur near the contact of the Bushveld Complex with older Transvaal Supergroup sedimentary rocks, may contain 1,100 metric tons of platinum and 1,370 metric tons of palladium (mean estimate to a depth of 1 km). A stratabound platinum-group element deposit in the Great Dyke in Zimbabwe may contain 6,900 metric tons of undiscovered platinum, palladium, and rhodium. By comparison, the global net demand for PGE in 2012 was approximately 460 metric tons. Since the 1920s, mining has recovered 7,200 and 107 metric tons of platinum-group elements from the Bushveld Complex and the Great Dyke, respectively. The large layered intrusions in southern Africa—the Bushveld Complex and the Great Dyke—are now and will continue to be a major source of the world’s supply of PGE. Mining will not deplete the identified mineral resources and reserves or potential undiscovered mineral resources for many decades; however, in the near-term, PGE supply could be affected by social, environmental, political, and economic factors.

Southern Africa↗

Sedimentology and reservoir heterogeneity of a valley-fill deposit– A field guide to the Dakota Sandstone of the San Rafael Swell, Utah

Valley-fill deposits form a significant class of hydrocarbon reservoirs in many basins of the world. Maximizing recovery of fluids from these reservoirs requires an understanding of the scales of fluid-flow heterogeneity present within the valley-fill system. The Upper Cretaceous Dakota Sandstone in the San Rafael Swell, Utah contains well exposed, relatively accessible outcrops that allow a unique view of the external geometry and internal complexity of a set of rocks interpreted to be deposits of an incised valley fill. These units can be traced on outcrop for tens of miles, and individual sandstone bodies are exposed in three dimensions because of modern erosion in side canyons in a semiarid setting and by exhumation of the overlying, easily erodible Mancos Shale. The Dakota consists of two major units: (1) a lower amalgamated sandstone facies dominated by large-scale cross stratification with several individual sandstone bodies ranging in thickness from 8 to 28 feet, ranging in width from 115 to 150 feet, and having lengths as much as 5,000 feet, and (2) an upper facies composed of numerous mud-encased lenticular sandstones, dominated by ripple-scale lamination, in bedsets ranging in thickness from 5 to 12 feet. The lower facies is interpreted to be fluvial, probably of mainly braided stream origin that exhibits multiple incisions amalgamated into a complex sandstone body. The upper facies has lower energy, probably anastomosed channels encased within alluvial and coastal-plain floodplain sediments. The Dakota valley-fill complex has multiple scales of heterogeneity that could affect fluid flow in similar oil and gas subsurface reservoirs. The largest scale heterogeneity is at the formation level, where the valley-fill complex is sealed within overlying and underlying units. Within the valley-fill complex, there are heterogeneities between individual sandstone bodies, and at the smallest scale, internal heterogeneities within the bodies themselves. These different scales of fluid-flow compartmentalization present a challenge to hydrocarbon exploration targeting paleovalley deposits, and producing fields containing these types of reservoirs may have significant bypassed pay, especially where well spacing is large.

Utah↗

Arsenic, chromium, uranium, and vanadium in rock, alluvium, and groundwater, Mojave River and Morongo Areas, western Mojave Desert, southern California

Trace elements within groundwater that originate from aquifer materials and pose potential public-health hazards if consumed are known as geogenic contaminants. The geogenic contaminants arsenic, chromium, and vanadium can form negatively charged ions with oxygen known as oxyanions. Uranium complexes with bicarbonate and carbonate to form negatively charged ions having aqueous chemistry similar to oxyanions. The concentrations of arsenic, chromium, uranium, and vanadium in groundwater result from the combined effects of (1) geologic abundance within aquifer materials; (2) the fraction of these elements that have weathered from and sorbed to the surfaces of mineral grains and are potentially available to groundwater; and (3) the aqueous chemistry of dissolved oxyanions in groundwater during different redox conditions and pH, both of which are affected by hydrogeology, including the length of time groundwater has been in contact with aquifer materials. Concentrations of arsenic, chromium, uranium, and vanadium were measured in samples of (1) rock, surficial alluvium, and drill cuttings using portable (handheld) X-ray fluorescence (pXRF); (2) operationally defined fractions extractable from these materials; and (3) water from wells sampled between 2000 and 2018 within the 3,500 square mile Mojave River area and Morongo area of the western Mojave Desert, southern California. Regionally, rock and surficial alluvium in the Mojave River and Morongo areas are high in arsenic, low in chromium and uranium, and near the average bulk continental crust concentration for vanadium. Locally, high chromium concentrations are present in mafic rock within the San Gabriel Mountains; high uranium concentrations are present in felsic rock within the San Bernardino Mountains; and high arsenic, uranium, and vanadium concentrations are present in extrusive (volcanic) felsic rock within uplands surrounding groundwater basins along the Mojave River downstream from Barstow, California. Elemental assemblages identified using principal component analyses (PCA) of pXRF data were used to characterize felsic, mafic, and felsic volcanic source terranes in rock, surficial alluvium, and in geologic material penetrated by selected monitoring wells drilled between 1994 and 2018. Highly felsic alluvium associated with recent deposition from the Mojave River was identified along the 90-mile length of the floodplain aquifer along the river. The thickness of these highly felsic alluvial deposits ranged from 200 feet (ft) near Victorville and near Barstow to a thin veneer about 30 ft thick downstream from Victorville and downstream portions of the floodplain aquifer within the Mojave Valley. Groundwater in the Mojave River and Morongo areas was generally oxic and alkaline (pH≥7.5). Maximum concentrations of arsenic, hexavalent chromium [Cr(VI)], uranium, and vanadium in water from as many as 498 wells sampled between 2000 and 2018 were 360, 140, 1,470, and 690 micrograms per liter (μg/L), respectively. Water from 22 percent of sampled wells exceeded the U.S. Environmental Protection Agency (EPA) maximum contaminant level (MCL) for arsenic of 10 μg/L, with arsenic concentrations commonly exceeding the MCL in water from wells east of Barstow, deep wells in the Victorville fan, and in suboxic or reduced groundwater within the floodplain aquifer. Water from about 1 percent of sampled wells had Cr(VI) concentrations greater than the California MCL for total chromium of 50 μg/L, whereas 13 percent of sampled wells had Cr(VI) concentrations greater than the former California MCL of 10 μg/L. Hexavalent chromium concentrations were highest in water from wells in the Sheep Creek alluvial fan, eroded from mafic rock in the San Gabriel Mountains, although Cr(VI) concentrations greater than the former California MCL also were present elsewhere in the study area where mafic materials or older groundwater were present. Water from about 9 percent of sampled wells exceeded the EPA MCL for uranium of 30 μg/L, with concentrations exceeding the MCL commonly associated with irrigation return from agricultural land overlying the floodplain aquifer. Water from about 7 percent of sampled wells had vanadium concentrations greater than the California notification level of 50 μg/L; most of these wells were in the Victorville fan within the Mojave River area. In general, arsenic concentrations were higher in suboxic or reduced water; chromium concentrations were higher in oxic, alkaline (pH≥7.5) water; uranium concentrations were higher in circumneutral to slightly alkaline water (pH≤7.4); and vanadium concentrations were higher in highly alkaline (pH≥8.0) water, independent of redox status. Concentrations within geologic source terranes are not the sole factor controlling the concentrations of geogenic elements in groundwater. Differences in mineral weathering, pH-dependent sorption to surface-exchange sites on mineral grains, and aqueous geochemistry (especially redox status and pH) affect geogenic element concentrations in groundwater. Consequently, the relative abundances of arsenic, Cr(VI), uranium, and vanadium in groundwater differ from their relative abundances in the average bulk continental crust and their regional abundances in rock and surficial alluvium within groundwater basins of the western Mojave Desert. Processes that control the concentrations of arsenic, chromium, uranium, and vanadium in groundwater operate at the mineral-grain and aquifer scale. At the mineral-grain scale, sequential chemical extraction data show arsenic and uranium are more available to groundwater (under specific geochemical conditions) than chromium or vanadium, which largely are unavailable within unweathered mineral grains. Additionally, chromium and vanadium form few aqueous complexes and bind tightly with iron minerals within surface coatings on mineral grains making them less available to groundwater, whereas complexation with other dissolved ions enhances the solubility of uranium and, to a lesser extent, arsenic. Complexation also increases the valence (less negative charge) and increases the size of dissolved oxyanions and uranium complexes with bicarbonate and carbonate making them less readily sorbed to aquifer materials. At the aquifer scale, hydrogeology (including isolation of water in aquifers from surface sources of recharge, older groundwater age, and long contact times between groundwater and aquifer materials) combined with geochemical processes (such as silicate weathering) to produce alkaline groundwater. Desorption from sorption sites on the surfaces of mineral grains with increasing pH increases arsenic, chromium, and vanadium concentrations in water from wells and increases Cr(VI) concentrations as long as water remains oxic. Aqueous geochemistry and concentrations of geogenic contaminants also are affected by anthropogenic activities including (1) discharge of treated municipal wastewater, which may change the redox status of groundwater; (2) return from irrigated agriculture, which may alter the chemistry of groundwater and increase the solubility of trace elements such as uranium; and (3) groundwater pumping and subsequent water-level declines, which may change the source of water yielded by wells. The quality of water imported from northern California and infiltrated from ponds for groundwater recharge may be altered by naturally present trace elements, especially uranium in areas of agricultural land use or chromium within mafic alluvium.

California↗

Hydrogeomorphic history, hydrodynamic conditions, and simulations of water levels and velocities from varying lake levels and streamflow for the Sheboygan Rivermouth and area of concern, Wisconsin

In 2011–13, the U.S. Geological Survey (USGS) conducted a study of the hydrogeomorphic setting and hydrodynamic conditions of the lower Sheboygan River and island complex within the backwater zone of Lake Michigan. Analyses of historical aerial photographs from 1938–2010 indicated that the Wildwood Islands complex had experienced mainly erosion and what was mainly one island in 1938 had eroded into about ten smaller islands and bars by 2010. Water levels, velocity and sedimentation patterns in the Sheboygan River mouth are affected by Lake Michigan water levels and seiche-related flow reversals for a potential river length of over 7 km. During the summer of 2012, when water levels in Lake Michigan were below the low water datum, seiche-related water-level fluctuations had a general range of 0.2 m and extended to just upstream of the Wildwood Islands complex, with greater variability in amplitude and frequency in the spring and fall months than in the summer. The low water level associated with the trough of a 60-90-minute seiche-related oscillation was sometimes 0.6 m lower than the low water datum. Runoff events produced river water levels during spring melt or storms that were 0.6 m above coincident Lake Michigan water levels. Frequent ice jams in the winter and early spring of 2012-13 raised river water levels to near the Lake Michigan ordinary high-water mark even though Lake Michigan water levels were at near record lows. Results from trends analyses from 1916 through 2008 indicated average annual streamflow and low flows were increasing in the Sheboygan River, but floods with an annual exceedance probability of 1 percent did not change. Simulations of a range of combinations of Lake Michigan water levels with river flows indicated that a variety of velocity patterns and water levels are possible near the Wildwood Islands complex. Simulated velocities ranged from 0 m/s during high lake levels and small river flows to 2 m/s during high lake levels and floods with an annual exceedance probability of 0.01. Silt deposition recorded in sediment cores matched locations of flow divergence in the model simulations. Time lapse photography confirmed flow reversals in the vicinity of the Wildwood Islands complex from frequent seiche oscillations. The study illustrates the large range in variability in water levels and velocities over short periods of time, and that the lake-effect zone can be greatly extended upstream during high lake levels for low-gradient rivermouth environments.

Wisconsin↗

Controls on sediment transport and storage in the Little Snake, Yampa, and Green Rivers in the vicinities of Dinosaur National Monument and Ouray National Wildlife Refuge, Colorado and Utah, with implications for fish habitat in the middle Green River

The transport of sand and finer sediment in the Yampa and Green river network is typically in disequilibrium with the local sediment supply because of the partial decoupling of the sources of water and sediment: most of the water is supplied farther upstream than most of the sediment. This decoupling leads to sand being transported in the main-stem rivers as elongating sand waves following sand resupply during tributary floods. Because of the large amount of sand supplied to the Yampa River by the Little Snake River, Yampa River annual floods generate sand waves that migrate downstream in the Green River causing longitudinal patterns in bed-sand grain size that, in turn, lead to large spatial changes in sand transport. These changes in bed-sand grain size dominate over changes in water discharge in regulating sand transport in the sand-bedded reaches of these rivers. Furthermore, at any given discharge, these changes in bed-sand grain size dominate over all other processes in regulating sand transport in both sand- and gravel-bedded reaches of these rivers. Consequently, erosion or deposition of sand, and the associated changes in fish habitat in the Uinta Basin segment of the Green River are only indirectly related to Green River discharge and Flaming Gorge Dam operations. Owing to the longitudinal patterns of bed-sand grain size associated with the downstream migration of sand waves generated by the Yampa River, a multi-year sequence of large, and likely slightly declining, annual floods on the Yampa River is the probable mechanism that increases backwater fish habitat in the Uinta Basin segment of the Green River. Cross-section resurveys indicate that the Uinta Basin (Jensen to Ouray) segment of the Green River has undergone sand erosion caused by slight channel widening since the 1990s (a channel response in opposition to that observed farther downstream in Canyonlands National Park during this period). These resurveys indicate that sand deposition leads to a decrease in channel complexity whereas sand erosion generally leads to an increase in channel complexity. The backwaters used as native fish nursery habitat consist of deep pools downstream from and adjacent to large bank-attached sandbars; thus, more extensive backwater habitat equates to greater channel complexity. The generation of the sand wave during the first large Yampa River flood in a sequence (that is, the year-1 flood) causes fining of the bed sand near Jensen. The downstream coarsening associated with bed sand that is finer near Jensen than downstream near Ouray causes a downstream decrease in sand transport in the Uinta Basin segment, leading to net sand deposition and decreased channel complexity. Continued downstream migration of this sand wave during the following year’s annual flood (that is, the year-2 flood) then causes downstream fining, leading to erosion of sand and increased channel complexity in this segment. Although the year-1 Yampa River flood supplies the sand and deposits the large sandbars required to form backwaters, and thereby makes possible future backwater habitat, these floods cause a temporary reduction in backwater habitat in the Uinta Basin segment because they tend to cause net sand deposition. It is the subsequent out-year Yampa River floods of likely equal or lesser magnitude that maintain or increase backwater habitat because these are the floods that convey sand through or erode sand from this segment. These typically smaller out-year Yampa River floods rework the sandbars deposited during the year-1 annual flood, thereby leading to the increases in both backwater area and volume that have been measured upon recession of these floods. Although artificial floods released from Flaming Gorge Dam might be used to simulate the habitat maintenance achieved by out-year Yampa River floods, the limited sand supply and stage associated with such dam releases precludes their use as a replacement for the sandbar-depositing role of year-1 Yampa River floods that is a prerequisite for backwater formation in the Uinta Basin segment of the Green River.

Colorado, Utah↗

Decision-making in agent-based modeling: A current review and future prospectus

All basic processes of ecological populations involve decisions; when and where to move, when and what to eat, and whether to fight or flee. Yet decisions and the underlying principles of decision-making have been difficult to integrate into the classical population-level models of ecology. Certainly, there is a long history of modeling individuals' searching behavior, diet selection, or conflict dynamics within social interactions. When all the individuals are given certain simple rules to govern their decision-making processes, the resultant population–level models have yielded important generalizations and theory. But it is also recognized that such models do not represent the way real individuals decide on actions. Factors that influence a decision include the organism's environment with its dynamic rewards and risks, the complex internal state of the organism, and its imperfect knowledge of the environment. In the case of animals, it may also involve complex social factors, and experience and learning, which vary among individuals. The way that all factors are weighed and processed to lead to decisions is a major area of behavioral theory. While classic population-level modeling is limited in its ability to integrate decision-making in its actual complexity, the development of individual- or agent-based models (IBM/ABMs) (we use ABM throughout to designate both “agent-based modeling” and an “agent-based model”) has opened the possibility of describing the way that decisions are made, and their effects, in minute detail. Over the years, these models have increased in size and complexity. Current ABMs can simulate thousands of individuals in realistic environments, and with highly detailed internal physiology, perception and ability to process the perceptions and make decisions based on those and their internal states. The implementation of decision-making in ABMs ranges from fairly simple to highly complex; the process of an individual deciding on an action can occur through the use of logical and simple (if-then) rules to more sophisticated neural networks and genetic algorithms. The purpose of this paper is to give an overview of the ways in which decisions are integrated into a variety of ABMs and to give a prospectus on the future of modeling of decisions in ABMs.

Frontiers in Ecology and Evolution↗

Ecological resilience

Resilience is the capacity of complex systems of people and nature to withstand disturbance without shifting into an alternate regime, or a different type of system organized around different processes and structures (Holling, 1973). Resilience theory was developed to explain the non-linear dynamics of complex adaptive systems, like social-ecological systems (SES) (Walker & Salt, 2006). It is often apparent when the resilience of a SES has been exceeded as the system discernibly changes, such as when a thriving city shifts into a poverty trap, but it is difficult to predict when that shift might occur because of the non-linear dynamics of complex systems. Ecological resilience should not be confused with engineering resilience (Angeler & Allen, 2016), which emphasizes the ability of a SES to perform a specific task consistently and predictably, and to re-establish performance quickly should a disturbance occur. Engineering resilience assumes that complex systems are characterized by a single equilibrium state, and this assumption is not appropriate for complex adaptive systems such as SES. In the risk governance context this means that compounded perturbations derived from hazards or global change can have unexpected and highly uncertain effects on natural resources, humans and societies. These effects can manifest in regime shifts, potentially spurring environmental degradation that might lock SES in an undesirable system state that can be difficult to reverse, and as a consequence economic crises, conflict, human health problems.

Book chapter↗

Methods for evaluating crown area profiles of forest stands

Canopy architectures of five structurally complex forest stands and three structurally simple forest stands in southwest Oregon and the Willamette Valley, Oregon, were evaluated and quantified through crown area profiles. Mixed conifer and mixed conifer hardwood stands across a range of sites were sampled for crown widths and heights. Crown width and shape equations were derived and used to quantify the stand crown area at incremental heights above the forest floor. Crown area profiles describe the spatial arrangement of aboveground forest vegetation and the total pore spaces between crowns. Plot by plot profiles were combined to produce vertical and horizontal displays of the stand crown area distribution. In complex stands, the forest space was moderately occupied by crowns from the forest floor up to heights over 30 m, producing uniform distributions of between-crown porosity. The structurally complex stands had between-crown porosity values of 70% to 90% for more than 23 vertical metres of canopy, and they had total between-crown porosities of 86% to 91%. The structurally simple stands had between-crown porosity values of 70% to 90% for less than 8 vertical metres of canopy, and they had total between-crown porosities of 69% to 85%. Variances in crown area indicate that variation in horizontal crown area (within heights) was larger in complex stands than in simple stands, but vertical crown areas (between heights) varied less in complex stands. The study provides a basis for discriminating between canopy architectures and for quantifying the porosity of forest canopies.

Canadian Journal of Forest Research↗