Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Topographic Map”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56Linked to original sources

Text and References To Accompany "Map Showing the Thickness and Character of Quaternary Sediments in the Glaciated United States East of the Rocky Mountains"

A 1:1,000,000-scale map of Quaternary deposits has been compiled for the glaciated area of the United States east of the Rocky Mountains (that is, the area covered by the Laurentide ice sheets). Parts of southern Ontario, areas beneath the Great Lakes, and parts of the submerged eastern seaboard are also included on the map. The map has three components that, together, provide the first regional three-dimensional view of these deposits. These map components are the surface distribution of Quaternary sediments, the total thickness of Quaternary sediments, and the distribution of significant buried Quaternary units. For many areas, this is the first map of Quaternary sediment thickness published at any scale. This report provides supporting information for the map, preliminary interpretations of sediment distribution, and the list of geologic sources used to generate the map. Within the mapped area, there is a particular need for three-dimensional geologic mapping to support decisions on water resources and land use. Approximately 40 percent of the U.S. population resides within the mapped area, which is less than one-quarter the size of the conterminous United States. This map is intended to supplement the more detailed mapping on which it is based and is designed to be a regional planning tool. Through the Pleistocene, large deposits of thick glacial sediment accumulated between certain late Wisconsinan glacial lobes, on bedrock topographic highs, whereas relatively thin deposits generally accumulated in the adjacent bedrock lowlands occupied by drainage and ice lobes. The lithology of the bedrock and its resistance to erosion in part controlled the patterns of ice lobation and the distribution of thick sediment. On a local scale, the spatial relation of these sediment masses to ice lobation has been suggested in places, and a regional correlation may have been assumed. This map provides the first comprehensive, regional view of glacial sediment thickness to permit such a correlation to be assessed.

Bulletin↗

An atlas of ShakeMaps for selected global earthquakes

An atlas of maps of peak ground motions and intensity 'ShakeMaps' has been developed for almost 5,000 recent and historical global earthquakes. These maps are produced using established ShakeMap methodology (Wald and others, 1999c; Wald and others, 2005) and constraints from macroseismic intensity data, instrumental ground motions, regional topographically-based site amplifications, and published earthquake-rupture models. Applying the ShakeMap methodology allows a consistent approach to combine point observations with ground-motion predictions to produce descriptions of peak ground motions and intensity for each event. We also calculate an estimated ground-motion uncertainty grid for each earthquake. The Atlas of ShakeMaps provides a consistent and quantitative description of the distribution and intensity of shaking for recent global earthquakes (1973-2007) as well as selected historic events. As such, the Atlas was developed specifically for calibrating global earthquake loss estimation methodologies to be used in the U.S. Geological Survey Prompt Assessment of Global Earthquakes for Response (PAGER) Project. PAGER will employ these loss models to rapidly estimate the impact of global earthquakes as part of the USGS National Earthquake Information Center's earthquake-response protocol. The development of the Atlas of ShakeMaps has also led to several key improvements to the Global ShakeMap system. The key upgrades include: addition of uncertainties in the ground motion mapping, introduction of modern ground-motion prediction equations, improved estimates of global seismic-site conditions (VS30), and improved definition of stable continental region polygons. Finally, we have merged all of the ShakeMaps in the Atlas to provide a global perspective of earthquake ground shaking for the past 35 years, allowing comparison with probabilistic hazard maps. The online Atlas and supporting databases can be found at http://earthquake.usgs.gov/eqcenter/shakemap/atlas.php/.

Open-File Report↗

Geologic map of the Castle Rock 7.5' quadrangle, Arizona and California

The Castle Rock quadrangle is in the northeast corner of Chemehuevi Valley, California and Arizona. It includes the Colorado River’s entrance to the valley at the mouth of Topock Gorge and the northern outskirts of Lake Havasu City, Arizona, and the Chemehuevi Indian Tribe community of Havasu Lake, California. The map includes large parts of the Chemehuevi Indian Reservation and the Havasu National Wildlife Refuge. Upon its exit through the mouth of Topock Gorge, the Colorado River enters Chemehuevi Valley where its floodplain (now submerged under Lake Havasu) is flanked by alluvial piedmonts of the Chemehuevi and Mohave Mountains to the west and east, respectively. This abrupt transition offers a useful perspective into the structural evolution of the Colorado River extensional corridor and of the Colorado River itself. It contains key structural and stratigraphic elements recording a complex history of Cretaceous plutonism and deformation, significant tectonic extension, volcanism, and sedimentation in the Miocene, and, ultimately, the evolution of the Colorado River from the latest Miocene to the present. Lake Havasu submerged the axis of Chemehuevi Valley following the completion of Parker Dam in 1938, and the Colorado River now feeds a verdant delta marsh that composes part of the map. Important bedrock units include the Cretaceous Chemehuevi Mountains Plutonic Suite, the 18.78 Ma Peach Spring Tuff, and thick overlying sequences of interlayered Miocene megabreccia and fanglomerate. The exposure of these units is closely linked to extension along the Chemehuevi-Whipple Mountains detachment fault system. The complex bedrock geologic framework serves as the structural and topographic foundation for the key strata chronicling the evolution of the lower Colorado River. Important stratigraphic units that bear on its evolution to the present day include the Bouse Formation, the Bullhead Alluvium, and the Chemehuevi Formation. The map area also contains the river’s modern delta at the head of Lake Havasu.

Arizona, California↗

Geologic Map of the Greenaway Quadrangle (V-24), Venus

The Greenaway quadrangle (V-24; lat 0 degrees -25 degrees N., long 120 degrees -150 degrees E.), Venus, derives its name from the impact crater Greenaway, centered at lat 22.9 degrees N., long 145.1 degrees E., in the northeastern part of the quadrangle. Greenaway was a well-noted writer and illustrator of children`s books in Britain during the nineteenth century. In Greenaway`s honor, the Library Association of Great Britain presents the annual Kate Greenaway Medal to an illustrator living and publishing in Britain who has produced the most distinguished children`s book illustrations for that year. The Greenaway quadrangle occupies an 8,400,000 km2 equatorial swath of lowlands and highlands. The map area is bounded by the crustal plateau, Thetis Regio, to the south and Gegute Tessera to the west. The rest of the quadrangle consists of part of Llorona Planitia, which is part of the vast lowlands that cover about 80 percent of Venus` surface. The southern map area marks the north edge of Aphrodite Terra, including Thetis Regio, that includes the highest topography in the quadrangle with elevations reaching >1 km above the Mean Planetary Radius (MPR; 6,051.84 km). Northern Aphrodite Terra abruptly slopes north to Llorona Planitia. A broad northeast-trending topographic arch pocked with coronae separates two northeast-trending elongate basins, Llorona Planitia on the east, that form depositional centers for shield and coronae-sourced materials; both basins drop to elevations of <-1 km. In addition to these major features, the map area hosts thousands of small volcanic constructs (shields); seven coronae; ribbon-tessera terrain; suites of faults, fractures, and wrinkle ridges; 23 impact craters; and one craterless splotch. Our goal for mapping the geology of the Greenaway quadrangle was to determine the geologic history for this region, which in turn provides insights into volcanic and tectonic processes that shaped the Venusian surface. Map relations illustrate that aerially expansive shield terrain (unit st) played a primary role and coronae played a secondary role in volcanic resurfacing across the map area.

Scientific Investigations Map↗

Two areas of probable holocene deformation in southwestern Utah

Recent geologic studies in southwestern Utah indicate two areas of probable Holocene ground deformation. 1. (1) A narrow arm of Lake Bonneville is known to have extended southward into Escalante Valley as far as Lund, Utah. Remnants of weakly developed shoreline features, which we have recently found, suggest that Lake Bonnevile covered an area of about 800 km 2 beyond its previously recognized limits near Lund. Shoreline elevations show a gradual increase from 1553 m near Lund to 1584 m at a point 50 km further southwest, representing a reversal of the pattern that would result from isostatic rebound. The conspicuously flat floor of Escalante Valley covers an additional 100 km 2 southward toward Enterprise, where its elevation is greater than 1610 m, but no shoreline features are recognizable; therefore, the former presence of the lake is only suspected. The measured 31-m rise over 50 km and the suspected 57-m rise in elevation over 70 km apparently occurred after Lake Bonnevile abandoned this area. The abandonment could have occurred as recently as 13,000 years ago, in which case the uplift is mainly of Holocene age. It probably has a deep-seated tectonic origin because it is situated above an inferred 9-km upwarp of the mantle that has been reported beneath the southern part of Escalante Valley on the basis of teleseismic P-wave residuals. 2. (2) Numerous closed topographic basins, ranging from a few hundred square meters to 1 km2 in area, are found at various elevations along the west margin of the Colorado Plateau northeast of Cedar City. Geologic mapping in that area indicates that the basins are located over complex structural depressions in which the rocks are faulted and folded. Several of the depressions are perched along the walls of the West Fork of Braffits Creek, one of a few north-draining creeks that have incised deeply into the plateau margin. Extremely active modern erosion by the creek has produced a 6-km-long gorge along which excellent exposures provide good evidence that the topographic depressions, as well as the entire valley, are located over a north-trending structural graben in which rocks of Cretaceous, Tertiary, and Quaternary age are complexly deformed. The trough appears to be actively subsiding, as evidenced by inward-dipping youthful scarps and V-shaped trenches found along both walls of the valley. The scarp on the east side is continuous for 1.5 km, and that on the west is discontinuous for the same distance. Charcoal-bearing alluvium from a sequence of faulted sedimentary debris in the inner gorge has yielded discordant dates by the 14C technique, but the dates suggest that at least 6 m of fault displacement occurred during the Late Holocene.

Utah↗

A targeted approach for mapping groundwater discharge to surface water and fish thermal refuge in four Lake Ontario tributaries

The duration, magnitude, and frequency of heatwaves are predicted to increase in the coming decades, a combination that can reduce the survival of many fish species. Across the world, there is broad interest in identifying thermal refuge for heat-intolerant fish species and exploring opportunities to enhance or protect these areas. Because deeper groundwater maintains a relatively constant temperature, groundwater-influenced areas along streams can provide cool-water refuge for fish during periods of extreme heat. A targeted approach was developed for identifying existing cold-water zones and areas of substantial groundwater discharge in four high priority Lake Ontario tributaries. Our approach included: (1) predicting where groundwater discharge is most likely with a simple geospatial model and (2) using model predictions to select field sites for intensive high-resolution study, including ground-based mapping of groundwater features (springs, seeps, tributaries) as well as drone-based optical and thermal infrared surveys. Results from field sites were used to both verify model performance and map different types and aerial extents of thermal anomalies. Geospatial modelling successfully predicted regions of widespread groundwater upwelling, later verified and mapped by field and drone surveys. Comparison of model and field survey results further highlighted specific geospatial layers, such as soil/bedrock types and topographic wetness index, as being particularly useful for predicting groundwater influence on streams in the study area. In addition, a comparison of geospatial model results with a model of fish abundances along the studied streams showed significant positive correlations for many heat-intolerant fish species over a wide geographic area. The approach developed in this study can be applied to other watersheds to highlight areas of probable groundwater discharge and could be used by fishery and water resource managers to support cold-water fish habitat management decision-making and resource conservation.

New York↗

Channel, floodplain, and wetland responses to floods and overbank sedimentation, 1846-2006, Halfway Creek Marsh, Upper Mississippi Valley, Wisconsin

Conversion of upland forest and prairie vegetation to agricultural land uses, following Euro-American settlement in the Upper Mississippi River System, led to accelerated runoff and soil erosion that subsequently transformed channels, floodplains, and wetlands on bottomlands. Halfway Creek Marsh, at the junction of Halfway Creek and the Mississippi River on Wisconsin's western border, is representative of such historical transformation. This marsh became the focus of a 2005-2006 investigation by scientists from the U.S. Geological Survey, the University of Wisconsin- Madison, and the U.S. Environmental Protection Agency, who used an understanding of the historical transformation to help managers identify possible restoration alternatives for Halfway Creek Marsh. Field-scale topographic surveys and sediment cores provided data for reconstructing patterns and rates of historical overbank sedimentation in the marsh. Information culled from historical maps, aerial photographs, General Land Offi ce Survey notes, and other historical documents helped establish the timing of anthropogenic disturbances and document changes in channel patterns. Major human disturbances, in addition to agricultural land uses, included railroad and road building, construction of artifi cial levees, drainage alterations, and repeated dam failures associated with large floods. A volume of approximately 1,400,000 m 3 , involving up to 2 m of sandy historical overbank deposition, is stored through the upper and lower marshes and along the adjacent margins of Halfway Creek and its principal tributary, Sand Lake Coulee. The estimated overbank sedimentation rate for the entire marsh is ??3,000 m 3 yr- 1 for the recent period 1994-2006. In spite of reduced surface runoff and soil erosion in recent years, this recent sedimentation rate still exceeds by ??4 times the early settlement (1846-1885) rate of 700 m 3 yr- 1 , when anthropogenic acceleration of upland surface runoff and soil erosion was beginning. The highest rate of historical bottomland sedimentation occurred from 1919 to 1936, when the estimated overbank sedimentation rate was 20,400 m 3 yr- 1 . This rate exceeded by nearly 30 times the 1846-1886 rate. Artifi cial levees were constructed along the upper reach of Halfway Creek in the marsh during the early twentieth century to restrict fl ooding on the adjacent bottomlands. Anomalously high overbank sedimentation rates subsequently occurred on the fl oodplain between the levees, which also facilitated more effi cient transport of sediment into the lower marsh bottomland. Although overbank sedimentation rates dropped after 1936, corresponding to the widespread adoption of soil-conservation and agricultural best-management practices, the continuation of anomalously high overbank sedimentation between the levees led to increased bank heights and development of a relatively deep channel. The deep cross-section morphology is commonly mistaken as evidence of channel incision; however, this morphology actually resulted from excessive overbank sedimentation. The historical metamorphosis of the Halfway Creek channel and riparian wetlands underscores the importance of understanding the long-term history of channel and fl oodplain evolution when restoration of channels and riparian wetlands are under consideration. Sedimentation patterns and channel morphology for Halfway Creek Marsh probably are representative of other anthropogenically altered riparian wetlands in the Upper Mississippi River System and similar landscapes elsewhere.

Special Paper of the Geological Society of America↗

Utility of Viking Orbiter images and products for Mars mapping

This paper reports on mapping procedures developed by the U.S. Geological Survey that use Viking Orbiter imagery and Mars Orbiter Laser Altimeter (MOLA) derived radii to produce topographic data. The use of Mosaiced Digital Image Models (MDIMs), created from Viking Orbiter images, and MOLA data to provide horizontal and vertical control is reviewed. We describe procedures to adapt a commercial digital photogrammetric workstation to work with planetary data.

Photogrammetric Engineering and Remote Sensing↗

1:100,000-scale topographic contours derived from digital elevation models, San Francisco Bay region, California: a digital database

This report presents a consistent set of 1:100,000-scale vector topographic contours for all eleven 30x60-minute quadrangles in the San Francisco Bay region for use in visualizing the topography and preparing maps of the region. The contours were prepared by contouring an areally continuous 30-m altitude grid (National Elevation Dataset, Jan., 1999), and differ from USGS hypsographic DLG's (available for only part of the region). The report consists of 26 numbered parts, which represent text, spatial data, and 1:100,000-scale map graphics. Most of the files are provided in two or three different digital formats. All files are available for download here.

California↗

Potentiometric surface of the upper Floridan Aquifer in the St. Johns River Water Management District and vicinity, Florida, May 1994

This map depicts the potentiometric surface of the Upper Floridan aquifer in the St. Johns River Water Management District and vicinity for May 1994. The map is based on water-level measurements made at approximately 1,000 wells and several springs. Data on the map were contoured using 5-foot contour intervals in most areas. The potentiometric surface of this karstic aquifer generally reflects land surface topography. Potentiometric surface highs often correspond to topographic highs, which are areas of surficial recharge to the Upper Floridan aquifer. Springs within topographic lows along with areas of more diffuse upward leakage are natural zones of discharge. Municipal, agricultural, and industrial withdrawals have lowered the potentiometric surface in some areas. The potentiometric surface ranged from 125 feet above sea level in Polk County to 32 feet below sea level in Nassau County. Water levels in May 1994 generally were 0 to 3 feet lower than those measured in May 1993. Water levels in May 1994 in northeast Florida generally were 0 to 3 feet higher than in September 1993, except in the lower St. Johns River basin, where water levels were 0 to 4 feet lower than in September 1993. In the rest of the mapped area, water levels in May 1994 generally were 0 to 4 feet lower than those measured in September 1993.

Open-File Report↗

Evaluation of groundwater and surface-water interactions in the Caddo Nation Tribal Jurisdictional Area, Caddo County, Oklahoma, 2010-13

Streamflows, springs, and wetlands are important natural and cultural resources to the Caddo Nation. Consequently, the Caddo Nation is concerned about the vulnerability of the Rush Springs aquifer to overdrafting and whether the aquifer will continue to be a viable source of water to tribal members and other local residents in the future. Interest in the long-term viability of local water resources has resulted in ongoing development of a comprehensive water plan by the Caddo Nation. As part of a multiyear project with the Caddo Nation to provide information and tools to better manage and protect water resources, the U.S. Geological Survey studied the hydraulic connection between the Rush Springs aquifer and springs and streams overlying the aquifer. The Caddo Nation Tribal Jurisdictional Area is located in southwestern Oklahoma, primarily in Caddo County. Underlying the Caddo Nation Tribal Jurisdictional Area is the Permian-age Rush Springs aquifer. Water from the Rush Springs aquifer is used for irrigation, public, livestock and aquaculture, and other supply purposes. Groundwater from the Rush Springs aquifer also is withdrawn by domestic (self-supplied) wells, although domestic use was not included in the water-use summary in this report. Perennial streamflow in many streams and creeks overlying the Rush Springs aquifer, such as Cobb Creek, Lake Creek, and Willow Creek, originates from springs and seeps discharging from the aquifer. This report provides information on the evaluation of groundwater and surface-water resources in the Caddo Nation Jurisdictional Area, and in particular, information that describes the hydraulic connection between the Rush Springs aquifer and springs and streams overlying the aquifer. This report also includes data and analyses of base flow, evidence for groundwater and surface-water interactions, locations of springs and wetland areas, groundwater flows interpreted from potentiometric-surface maps, and hydrographs of water levels monitored in the Caddo Nation Tribal Jurisdictional Area from 2010 to 2013. Flow in streams overlying the Rush Springs aquifer, on average, were composed of 50 percent base flow in most years. Monthly mean base flow appeared to maintain streamflows throughout each year, but periods of zero flow were documented in daily hydrographs at each measured site, typically in the summer months. A pneumatic slug-test technique was used at 15 sites to determine the horizontal hydraulic conductivity of streambed sediments in streams overlying the Rush Springs aquifer. Converting horizontal hydraulic conductivities (Kh) from the slug-test analyses to vertical hydraulic conductivities (Kv) by using a ratio of Kv/Kh = 0.1 resulted in estimates of vertical streambed hydraulic conductivity ranging from 0.1 to 8.6 feet per day. Data obtained from a hydraulic potentiomanometer in streambed sediments and streams in August 2012 indicate that water flow was from the streambed sediments to the stream (gaining) at 6 of 15 sites, and that water flow was from the stream to the streambed sediments (losing) at 9 of 15 sites. The groundwater and surface-water interaction data collected at the Cobb Creek near Eakly, Okla., streamflow gaging station (07325800), indicate that the bedrock groundwater, alluvial groundwater, and surface-water resources are closely connected. Because of this hydrologic connection, large perennial streams in the study area may change from gaining to losing streams in the summer. The timing and severity of this change from a gaining to a losing condition probably is affected by the local or regional withdrawal of groundwater for irrigation in the summer growing season. Wells placed closer to streams have a greater and more immediate effect on alluvial groundwater levels and stream stages than wells placed farther from streams. Large-capacity irrigation wells, even those completed hundreds of feet below land surface in the bedrock aquifer, can induce surface-water flow from nearby streams by lowering alluvial groundwater levels below the stream altitude. Twenty-five new springs visible from public roads and paths were documented during a survey of springs in 2011. Most of the springs are in upland draws on the flanks of topographic ridges. Wetlands primarily were identified by using a combination of data sources including the National Wetlands Inventory, Soil Survey Geographic database frequently flooded soils maps, and aerial photographs. Regional flow directions were determined by analysis of water levels measured in 29 wells completed in the Rush 2 Springs aquifer in Caddo County and the Caddo Nation Tribal Jurisdictional Area. Water levels were monitored every 30 minutes in five wells by using a vented pressure transducer and a data-collection platform with real-time transmitting equipment in each well. Those five wells ranged in depth from 210 to 350 feet. Water levels in these five wells indicate that there was a decrease in water storage in the Rush Springs aquifer from October 2010 to June 2013.

Oklahoma↗

Geomorphic map of Worcester County, Maryland, interpreted from a LIDAR-based, digital elevation model

A recently compiled mosaic of a LIDAR-based digital elevation model (DEM) is presented with geomorphic analysis of new macro-topographic details. The geologic framework of the surficial and near surface late Cenozoic deposits of the central uplands, Pocomoke River valley, and the Atlantic Coast includes Cenozoic to recent sediments from fluvial, estuarine, and littoral depositional environments. Extensive Pleistocene (cold climate) sandy dune fields are deposited over much of the terraced landscape. The macro details from the LIDAR image reveal 2 meter-scale resolution of details of the shapes of individual dunes, and fields of translocated sand sheets. Most terrace surfaces are overprinted with circular to elliptical rimmed basins that represent complex histories of ephemeral ponds that were formed, drained, and overprinted by younger basins. The terrains of composite ephemeral ponds and the dune fields are inter-shingled at their margins indicating contemporaneous erosion, deposition, and re-arrangement and possible internal deformation of the surficial deposits. The aggregate of these landform details and their deposits are interpreted as the products of arid, cold climate processes that were common to the mid-Atlantic region during the Last Glacial Maximum. In the Pocomoke valley and its larger tributaries, erosional remnants of sandy flood plains with anastomosing channels indicate the dynamics of former hydrology and sediment load of the watershed that prevailed at the end of the Pleistocene. As the climate warmed and precipitation increased during the transition from late Pleistocene to Holocene, dune fields were stabilized by vegetation, and the stream discharge increased. The increased discharge and greater local relief of streams graded to lower sea levels stimulated down cutting and created the deeply incised valleys out onto the continental shelf. These incised valleys have been filling with fluvial to intertidal deposits that record the rising sea level and warmer, more humid climate in the mid-Atlantic region throughout the Holocene. Thus, the geomorphic details provided by the new LIDAR DEM actually record the response of the landscape to abrupt climate change. Holocene trends and land-use patterns from Colonial to modern times can also be interpreted from the local macro- scale details of the landscape. Beyond the obvious utility of these data for land-use planning and assessments of resources and hazards, the new map presents new details on the impact of climate changes on a mid-latitude, outer Coastal plain landscape.

Maryland↗

Mapping forest functional type in a forest-shrubland ecotone using SPOT imagery and predictive habitat distribution modelling

The availability of land cover data at local scales is an important component in forest management and monitoring efforts. Regional land cover data seldom provide detailed information needed to support local management needs. Here we present a transferable framework to model forest cover by major plant functional type using aerial photos, multi-date Syst&egrave;me Pour l&rsquo;Observation de la Terre (SPOT) imagery, and topographic variables. We developed probability of occurrence models for deciduous broad-leaved forest and needle-leaved evergreen forest using logistic regression in the southern portion of the Wyoming Basin Ecoregion. The model outputs were combined into a synthesis map depicting deciduous and coniferous forest cover type. We evaluated the models and synthesis map using a field-validated, independent data source. Results showed strong relationships between forest cover and model variables, and the synthesis map was accurate with an overall correct classification rate of 0.87 and Cohen&rsquo;s kappa value of 0.81. The results suggest our method adequately captures the functional type, size, and distribution pattern of forest cover in a spatially heterogeneous landscape.

Colorado, Utah, Wyoming↗

Two models for evaluating landslide hazards

Two alternative procedures for estimating landslide hazards were evaluated using data on topographic digital elevation models (DEMs) and bedrock lithologies in an area adjacent to the Missouri River in Atchison County, Kansas, USA. The two procedures are based on the likelihood ratio model but utilize different assumptions. The empirical likelihood ratio model is based on non-parametric empirical univariate frequency distribution functions under an assumption of conditional independence while the multivariate logistic discriminant model assumes that likelihood ratios can be expressed in terms of logistic functions. The relative hazards of occurrence of landslides were estimated by an empirical likelihood ratio model and by multivariate logistic discriminant analysis. Predictor variables consisted of grids containing topographic elevations, slope angles, and slope aspects calculated from a 30-m DEM. An integer grid of coded bedrock lithologies taken from digitized geologic maps was also used as a predictor variable. Both statistical models yield relative estimates in the form of the proportion of total map area predicted to already contain or to be the site of future landslides. The stabilities of estimates were checked by cross-validation of results from random subsamples, using each of the two procedures. Cell-by-cell comparisons of hazard maps made by the two models show that the two sets of estimates are virtually identical. This suggests that the empirical likelihood ratio and the logistic discriminant analysis models are robust with respect to the conditional independent assumption and the logistic function assumption, respectively, and that either model can be used successfully to evaluate landslide hazards. ?? 2006.

Computers & Geosciences↗

Determining Titan surface topography from Cassini SAR data

A technique, referred to as SARTopo, has been developed for obtaining surface height estimates with 10 km horizontal resolution and 75 m vertical resolution of the surface of Titan along each Cassini Synthetic Aperture Radar (SAR) swath. We describe the technique and present maps of the co-located data sets. A global map and regional maps of Xanadu and the northern hemisphere hydrocarbon lakes district are included in the results. A strength of the technique is that it provides topographic information co-located with SAR imagery. Having a topographic context vastly improves the interpretability of the SAR imagery and is essential for understanding Titan. SARTopo is capable of estimating surface heights for most of the SAR-imaged surface of Titan. Currently nearly 30% of the surface is within 100 km of a SARTopo height profile. Other competing techniques provide orders of magnitude less coverage. We validate the SARTopo technique through comparison with known geomorphological features such as mountain ranges and craters, and by comparison with co-located nadir altimetry, including a 3000 km strip that had been observed by SAR a month earlier. In this area, the SARTopo and nadir altimetry data sets are co-located tightly (within 5-10 km for one 500 km section), have similar resolution, and as expected agree closely in surface height. Furthermore the region contains prominent high spatial resolution topography, so it provides an excellent test of the resolution and precision of both techniques.

Icarus↗

Evaluation of Terrestrial LIDAR for Monitoring Geomorphic Change at Archeological Sites in Grand Canyon National Park, Arizona

This report presents the results of an evaluation of terrestrial light detection and ranging (LIDAR) for monitoring geomorphic change at archeological sites located within Grand Canyon National Park, Ariz. Traditionally, topographic change-detection studies have used total station methods for the collection of data related to key measurable features of site erosion such as the location of thalwegs and knickpoints of gullies that traverse archeological sites (for example, Pederson and others, 2003). Total station methods require survey teams to walk within and on the features of interest within the archeological sites to take accurate measurements. As a result, site impacts may develop such as trailing, damage to cryptogamic crusts, and surface compaction that can exacerbate future erosion of the sites. National Park Service (NPS) resource managers have become increasingly concerned that repeated surveys for research and monitoring purposes may have a detrimental impact on the resources that researchers are trying to study and protect. Beginning in 2006, the Sociocultural Program of the U.S. Geological Survey's (USGS) Grand Canyon Monitoring and Research Center (GCMRC) initiated an evaluation of terrestrial LIDAR as a new monitoring tool that might enhance data quality and reduce site impacts. This evaluation was conducted as one part of an ongoing study to develop objective, replicable, quantifiable monitoring protocols for tracking the status and trend of variables affecting archeological site condition along the Colorado River corridor. The overall study consists of two elements: (1) an evaluation of the methodology through direct comparison to geomorphologic metrics already being collected by total station methods (this report) and (2) an evaluation of terrestrial LIDAR's ability to detect topographic change through the collection of temporally different datasets (a report on this portion of the study is anticipated early in 2009). The main goals of the first element of study were to 1. test the methodology and survey protocols of terrestrial LIDAR surveying under actual archeological site field conditions, 2. examine the ability to collect topographic data of entire archeological sites given such constraints as vegetation and rough topography, and 3. evaluate the ability of terrestrial LIDAR to accurately map the locations of key geomorphic features already being collected by total station methods such as gully thalweg and knickpoint locations. This report focuses on the ability of terrestrial LIDAR to duplicate total station methods, including typical erosion-related change features such as the plan view gully thalweg location and the gully thalweg long profile. The report also presents information concerning the use of terrestrial LIDAR for archeological site monitoring in a general sense. In addition, a detailed comparison of the site impacts caused by both total station and terrestrial LIDAR survey methods is presented using a suite of indicators, including total field survey time, field footstep count, and data-processing time. A thorough discussion of the relative benefits and limitations of using terrestrial LIDAR for monitoring erosion-induced changes at archeological sites in Grand Canyon National Park concludes this report.

Open-File Report↗

High-angle faults in the basement of Yucca Flat, Nevada Test Site, Nevada, based on analysis of a constrained gravity inversion surface

Using a model of the topographic subsurface derived from drill hole and gravity inversion analysis of the basement rocks in Yucca Flat, Nevada Test Site (NTS), Nevada, a fault map and digital fault dataset were constructed based on offsets of the basement surface. Because these faults are, in large part, not present at the surface, they are interpreted to be inactive faults, older than the alluvial basin fill.

Nevada↗

Bathymetric map, surface area, and stage-capacity for the U.S. part of Lake Koocanusa, Lincoln County, Montana, 2016–18

The U.S. Geological Survey and U.S. Army Corps of Engineers collected high-resolution multibeam sonar data during 2016–18 to compute stage-area and stage-capacity tables for the U.S. part of Koocanusa Reservoir in Lincoln County, northwestern Montana. Koocanusa Reservoir is a transboundary reservoir extending about 48 miles from Libby Dam upstream to the U.S. international boundary with Canada and another 42 miles within Canada to near Wardner, British Columbia. The upstream extent of the reservoir within Canada, where much of the sedimentation was previously documented, was not included in this study. Previously developed stage-area and stage-capacity tables were developed for the entire reservoir and could not be directly compared to the stage-area and stage-capacity tables from this study. Two discrete stage-area and stage-capacity values from the original survey (unknown survey date prior to 1980) were available for parts of the reservoir within the United States at the normal full-pool and normal minimum-pool elevations (2,459 and 2,287 U.S. survey feet above the National Geodetic Vertical Datum of 1929, respectively). At the normal full-pool elevation, the stage-area relation resulted in a 0.06-percent increase in surface-water acreage. Conversely, a 0.03-percent decrease in storage capacity at the normal full-pool elevation occurred. At the normal-minimum-pool elevation, the stage-area relation showed a 1.21-percent decrease in surface water from 14,487 to 14,314 acres. The usable storage capacity, defined as the volume of water between the normal full-pool and normal minimum-pool elevations, decreased by 0.39 percent (15,353 acre-feet). Results from this study indicate that a relatively minimal amount of sedimentation has occurred since initial filling in Koocanusa Reservoir for parts of the reservoir within the United States. Updated stage-area and stage-capacity tables for the entire reservoir will require additional bathymetric and topographic surveys for the parts of Koocanusa Reservoir within Canada.

Montana↗