Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Surveys in Geophysics”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56Linked to original sources
USGS2007

Lithostratigraphic and Hydrogeologic Characteristics of the Ordovician Sinnipee Group in the Vicinity of Waupun, Fond du Lac County, Wisconsin, 1995-96

Three boreholes were drilled at a farm site near Waupun, Wis., to improve the understanding of regional hydrogeology of the Ordovician Sinnipee Group. At the site the Sinnipee Group is the uppermost bedrock unit and is found to be about 183 ft thick. On the basis of core descriptions by the Illinois State Geological Survey, the Sinnipee Group at the site comprises (stratigraphically lowest to highest) the Platteville Formation (about 51 ft thick), the Decorah Formation (about 14 ft thick), and the Galena Dolomite (about 119 ft thick). The Illinois State Geological Survey noted that hardgrounds were common in the rock core, some having stratigraphic significance. Four very well developed hardgrounds were identified, three of which were used as formation or member contacts. The hardground at about 797 ft NGVD 29 represents the top of the Platteville Formation, the hardground at about 754 ft represents the top of the Pecatonica Member of the Platteville Formation, and the hardground at about 746 ft represents the top of the Glenwood Formation. On the basis of samples collected from one borehole, the ground water at the site is of the calcium-magnesium bicarbonate type. Trichloroethene was detected in one sample at a concentration of 1 ?g/L, and the concentration of antimony in one sample exceeded the U.S. Environmental Protection Agency (USEPA) Primary Drinking Water Standard. Other water samples contained aluminum and sodium in concentrations that exceeded the USEPA Secondary Drinking Water Standard and the USEPA Drinking Water Equivalent Level, respectively. Samples from various depths contained concentrations of iron, manganese, or dissolved manganese that were near or exceeded the USEPA Secondary Drinking Water Standard. The cross-borehole radar tomography data show differences in velocity and attenuation among the three major units in the Sinnipee Group. Matrix porosity measured in rock-core samples correlates well with these velocity and attenuation tomograms. The Galena Dolomite has the lowest mean porosity at 2.4 percent (7 samples) and is represented in the tomograms as generally having the lowest attenuation and greatest velocity. Below the Galena Dolomite is a transition to a zone with the greatest attenuation and lowest velocity on the tomograms. The rock core shows this interval to be the shaley dolomite of the Decorah Formation which has a mean porosity of 8.3 percent (2 samples). Below the Decorah Formation, the Platteville Formation has a mean porosity of 3.6 percent (6 samples) and is represented in the tomograms as having velocity and attenuation generally intermediate between the Galena Dolomite and the Decorah Formation. The evaluation of the single-hole directional ground-penetrating radar reflection survey in FL-800 identified 15 reflectors (secondary permeability features). Some of the reflectors do correlate with fractures and partings noted on geophysical logs and rock core; however, many additional fractures and partings identified by the televiewer log and/or core description were not measured by the borehole radar survey. Horizontal or sub-horizontal reflectors (bedding-plane partings) which do correlate with indications of bedding-plane partings on the acoustic televiewer intersect the borehole at about 917 ft, 907 ft, 870 ft, 805 ft, and 797 ft. The flowmeter profiles indicate that water entering and exiting the boreholes at seven bedding-plane partings accounts for most of the total borehole transmissivity. The flowmeter profiles in all three boreholes show that more than 90 percent of the total borehole transmissivity is provided by bedding-plane partings found at 870 ft and higher stratigraphically within the Galena Dolomite. Static water levels were measured in selected intervals of the three boreholes, and vertical hydraulic gradients were estimated by comparing levels in adjacent intervals. Gradients were found to be almost uniformly downward, ranging from -0.040 to -1.251 ft/ft. On th

Scientific Investigations Report↗
USGS2014

Results to be expected from resistivity‐measurements

The work described in this paper was all done in connection with dam‐site investigations and was not directly connected with hydrology. However, geophysics is coming to have a place in hydrologic investigations, and these results may throw some light on what can be accomplished by resistivity‐measurements. We have found that,for many questions not involving exact determinations of depth, resistivity‐ measurements give conclusive answers. Ordinarily a reliable answer can be expected to the question of the existence of a buried channel if the covering is composed of unconsolidated material with a resistivity differing from that of the rock. For example, topographic surveys were made at two alternative dam‐sites on a river about four miles apart. Examination of the surface‐geology indicated that a channel burled under glacial debris possibly existed at each site, but resistivity‐measurements proved that such a channel existed at one site and not at the other. On the other hand, at another site the geologist suspected there might be an old channel on a steep side hill. Geophysical measurements showed a depth of overburden of 46 feet and showed that if a deeper channel exists it must be narrow; but they did not show positively that no such channel exists. Probably a careful survey with a large number of lines would have given a more definite answer, but the rough topography interfered with the resistivity‐work, and time and money were not available for a detailed survey. After completion of the geophysical work, the geologist located some outcrops which led him to conclude that no old channel exists at this site. At two other dam‐sites in Oregon resistivity‐measurements showed that there were no burled channels.

Eos, Transactions, American Geophysical Union↗
USGS2011

The path to a successful one-million tonne demonstration of geological sequestration: Characterization, cooperation, and collaboration

The development of the Illinois Basin-Decatur USA test site for a 1 million tonne injection of CO 2 into the Mount Simon Sandstone saline reservoir beginning in 2011 has been a multiphase process requiring a wide array of personnel and resources that began in 2003. The process of regional characterization took two years as part of a Phase I effort focused on the entire Illinois Basin, located in Illinois, Indiana, and Kentucky, USA. Seeking the cooperation of an industrial source of CO 2 and site selection within the Basin took place during Phase II while most of the concurrent research emphasis was on a set of small-scale tests of Enhanced Oil Recovery (EOR) and CO 2 injection into a coal seam. Phase III began the commitment to the 1 million-tonne test site development through the collaboration of the Archer Daniels Midland Company (ADM) who is providing a site, the CO 2 , and developing a compression facility, of Schlumberger Carbon Services who is providing expertise for operations, drilling, geophysics, risk assessment, and reservoir modelling, and of the Illinois State Geological Survey (ISGS) whose geologists and engineers lead the Midwest Geological Sequestration Consortium (MGSC). Communications and outreach has been a collaborative effort of ADM, ISGS and Schlumberger Carbon Services. The Consortium is one of the seven Regional Carbon Sequestration Partnerships, a carbon sequestration research program supported by the National Energy Technology Laboratory of the U.S. Department of Energy.

Illinois↗
USGS2020

In situ measurements of compressional wave speed during gravity coring operations in the New England mud patch

This paper presents measurements of sediment sound-speed profiles measured in situ using the acoustic coring system (ACS). The reported measurements were obtained from seven gravity cores collected in the New England Mud Patch. The ACS uses two sets of transducers mounted below the penetrating tip of a sediment corer to make in situ measurements of geoacoustic properties as the corer penetrates the seabed. The in situ sound-speed profiles are interpreted in the context of stratigraphic layering measured by a seismic survey, and the measured sound-speed profiles are consistent with the geophysical description. The in situ sound-speed profiles measured by the ACS were compared to conventional measurements of sound speed on the recovered cores using the multisensor core logger (MSCL). The MSCL data displayed both random and systematic errors that were attributed to disturbance from the coring process and/or the handling of the sediments after collection. Finally, using porosity and grain size distributions measured from discrete samples of the cored sediments, the in situ sound-speed measurements were compared to empirical regressions based on independent data sets.

Atlantic Ocean, New England Mud Patch↗
USGS1949

Ostracoda from well, shot hole, and outcrop samples in Naval Petroleum Reserve No. 4

The ostracodes described in this report are from material collected in Naval Petroleum Reserve No. 4, northern Alaska. The samples were obtained from well and seismograph shot holes drilled by Arctic Contractors and United States Geophysical Company and from field samples collected by the United States Geological Survey in the period from 1945 to 1948/ The earliest samples were processed for microfossils in Washington, but most of the material was prepared in the Fairbanks Laboratory of the Geological Survey.

Alaska↗
USGS2017

The State Geologic Map Compilation (SGMC) geodatabase of the conterminous United States

The State Geologic Map Compilation (SGMC) geodatabase of the conterminous United States (https://doi. org/10.5066/F7WH2N65) represents a seamless, spatial database of 48 State geologic maps that range from 1:50,000 to 1:1,000,000 scale. A national digital geologic map database is essential in interpreting other datasets that support numerous types of national-scale studies and assessments, such as those that provide geochemistry, remote sensing, or geophysical data. The SGMC is a compilation of the individual U.S. Geological Survey releases of the Preliminary Integrated Geologic Map Databases for the United States. The SGMC geodatabase also contains updated data for seven States and seven entirely new State geologic maps that have been added since the preliminary databases were published. Numerous errors have been corrected and enhancements added to the preliminary datasets using thorough quality assurance/quality control procedures. The SGMC is not a truly integrated geologic map database because geologic units have not been reconciled across State boundaries. However, the geologic data contained in each State geologic map have been standardized to allow spatial analyses of lithology, age, and stratigraphy at a national scale.

Data Series↗
USGS2014

Magnetic susceptibility data for some exposed bedrock in the western conterminous United States

In-place rock magnetic susceptibility measurements for 746 sites in the western conterminous United States are reported in a database. Of these 746 sites, 408 sites are in the Silverton Caldera area of the San Juan Mountains of southwestern Colorado. Of the 408 sites in the Silverton Caldera area, 106 sites are underground. The remaining 338 sites outside the Silverton Caldera area were on outcropping rock, are distributed from southern Arizona to northwestern Wyoming, and include data from California, Nevada, Utah, Colorado, and New Mexico. Rock-density measurements are included for some sites. These data have been collected by various U.S. Geological Survey studies from 1991 through 2012 and are intended to help improve geophysical modeling of the Earth’s crust in the Western United States. A map-based graphical user interface is included to facilitate use of the data.

Arizona, California, Colorado, Nevada, New Mexico,↗
USGS2002

Aerial Magnetic, Electromagnetic, and Gamma-ray Survey, Berrien County, Michigan

This publication includes maps, grids, and flightline databases of a detailed aerial survey and maps and grids of satellite data in Berrien County, Michigan. The purpose of the survey was to map aquifers in glacial terrains. This was accomplished by using a DIGHEMVRES mufti-coil, mufti-frequency electromagnetic system supplemented by a high sensitivity cesium magnetometer and 256-channel spectrometer. The information from these sensors was processed to produce maps, which display the conductive, magnetic and radioactive properties of the survey area. A GPS electronic navigation system ensured accurate positioning of the geophysical data. This report also includes data from the advanced spaceborne thermal emission and reflection (ASTER) radiometer. ASTER measures thermal emission and reflection data for 14 bands of the spectrum.

Open-File Report↗
USGS1980

Borehole geophysical measurements for hole UE25-3, Nevada Test Site, Nuclear Waste Isolation Program

Borehole geophysical measurements made in drill hole UE25a-3 with a U.S. Geological Survey research well-logging truck are presented in this paper. The purpose of these logging measurements is to provide in-situ physical properties information that is not commercially available on drill hole UE25a-3. Well logs are presented in this paper for dual-detector density, normal resistivity, gamma-ray, neutron-neutron, induced polarization, and magnetic susceptibility measurements. These data are analyzed for correlations with the core lithology. Hole-to-surface measurements made from drill hole UE25a-3 indicate the presence of two resistive bodies at depth. The deeper resistive anomaly may be related to a granitic intrusion.

Nevada↗
USGS1993

Ground-water quality at the Management Systems Evaluation Area (MSEA) near Princeton, Minnesota, 1991

The northern cornbelt sand-plains Management Systems Evaluation Area (MSEA) program is a multiagency, multistate initiative to evaluate the effects of modified and prevailing fanning systems on water quality in a sand-plain area in Minnesota and at satellite areas in North and South Dakota, and Wisconsin (Delin and others, 1992). The primary objective of the northern cornbelt sand-plains MSEA is to evaluate the effects of ridge-tillage practices in a corn and soybean farming system on ground-water quality. The Minnesota MSEA program is a cooperative study primarily between the U.S. Department of Agriculture-Agricultural Research Service, the University of Minnesota Soil Science Department, and the U.S. Geological Survey. The Minnesota Pollution Control Agency and the Department of Geology and Geophysics at the University of Minnesota are also cooperating in the evaluation of ground-water quality at the MSEA.

Minnesota↗
USGS1993

Ground-water quality at the Management Systems Evaluation Area near Princeton, Minnesota, 1991-92

The northern cornbelt sand-plains Management Systems Evaluation Area (MSEA) program is a multiagency, multistate initiative to evaluate the effects of modified and prevailing farming systems on water quality in a sand-plain area in Minnesota and at satellite areas in North and South Dakota, and Wisconsin. The primary objective of Minnesota MSEA is to evaluate the effects of ridge-tillage practices in a corn and soybean farming system on ground-water quality. The Minnesota MSEA program is a cooperative study primarily between the U.S. Department of Agriculture Agricultural Research Service, the University of Minnesota Soil Science Department, and the U.S. Geological Survey. The Minnesota Pollution Control Agency and the Department of Geology and Geophysics at the University of Minnesota are also cooperating in the evaluation of groundwater quality at the MSEA.

Minnesota↗
USGS2015

Offshore geology and geomorphology from Point Piedras Blancas to Pismo Beach, San Luis Obispo County, California

Marine geology and geomorphology were mapped along the continental shelf and upper slope between Point Piedras Blancas and Pismo Beach, California. The map area is divided into the following three (smaller) map areas, listed from north to south: San Simeon, Morro Bay, and Point San Luis. Each smaller map area consists of a geologic map and the corresponding geophysical data that support the geologic mapping. Each geophysical data sheet includes shaded-relief multibeam bathymetry, seismic-reflection-survey tracklines, and residual magnetic anomalies, as well as a smaller version of the geologic map for reference. Offshore geologic units were delineated on the basis of integrated analysis of adjacent onshore geology, seafloor-sediment and rock samples, multibeam bathymetry and backscatter imagery, magnetic data, and high-resolution seismic-reflection profiles. Although the geologic maps are presented here at 1:35,000 scale, map interpretation was conducted at scales of between 1:6,000 and 1:12,000. Sea level was approximately 120 to 130 m lower during the Last Glacial Maximum (about 21 ka). This approximate depth corresponds to the modern shelf break, a lateral change from the gently dipping (0.8° to 1.0°) outer shelf to the slightly more steeply dipping (about 1.5° to 2.5°) upper slope in the central and northern parts of the map area. South of Point San Luis in San Luis Bay, deltaic deposits offshore of the mouth of the Santa Maria River (11 km south of the map area) have prograded across the shelf break and now form a continuous low-angle (about 0.8°) ramp that extends to water depths of more than 160 m. The shelf break defines the landward boundary of slope deposits. North of Estero Bay, the shelf break is characterized by a distinctly sharp slope break that is mapped as a landslide headscarp above landslide deposits. Multibeam imagery and seismic-reflection profiles across this part of the shelf break show evidence of slope failure, such as slumping, sliding, and soft-sediment deformation, along the entire length of the scarp. Notably, this shelf-break scarp corresponds to a west splay of the Hosgri Fault that dies out just north of the scarp, suggesting that faulting is controlling the location (and instability) of the shelf break in this area.

California↗
USGS2020

Alkalic-type epithermal gold deposit model

This report summarizes the primary characteristics of alkalic-type epithermal gold (Au) deposits and provides an updated descriptive model. These deposits, primarily of Mesozoic to Neogene age, are among the largest epithermal gold deposits in the world. Considered a subset of low-sulfidation epithermal deposits, they are spatially and genetically linked to small stocks or clusters of intrusions containing high alkali-element contents. Deposits occur as disseminations, breccia-fillings, and veins and may be spatially and genetically related to skarns and low-grade porphyry copper (Cu) or molybdenum (Mo) systems. Gold commonly occurs as native gold, precious metal tellurides, and as sub-micron gold in arsenian pyrite. Quartz, carbonate, fluorite, adularia, and vanadian muscovite/roscoelite are the most common gangue minerals. Alkalic-type gold deposits form in a variety of geological settings including continent-arc collision zones and back-arc or post-subduction rifts that are invariably characterized by a transition from convergent to extensional or transpressive tectonics. The geochemical compositions of alkaline igneous rocks spatially linked with these deposits span the alkaline-subalkaline transition. Their alkali enrichment may be masked by potassic alteration, but the unaltered or least altered rocks (1) have chondrite normalized patterns that are commonly light rare earth element (LREE) enriched, (2) are heavy rare earth element (HREE) depleted, and (3) have high large ion lithophile contents and variable enrichment of high-field strength elements. Radiogenic isotopes suggest a mantle derivation for the alkalic magmas but allow crustal contamination. Oxygen and hydrogen isotope compositions show that the fluids responsible for deposit formation are dominantly magmatic, although meteoric or other external fluids (seawater, evolved groundwater) also contributed to the ore-forming fluids responsible for these deposits. Carbon and sulfur isotope compositions in vein-hosted carbonates and sulfide gangue minerals, respectively, coincide with magmatic values, although a sedimentary source of carbon and sulfur is evident in several deposits. Deep-seated structures are critical for the upwelling of hydrous alkalic magmas and for focusing magmatic-hydrothermal fluids to the site of precious metal deposition. The source of gold, silver (Ag), tellurium (Te), vanadium (V), and fluorine (F) was probably the alkalic igneous rocks themselves, and the coexistence of native gold, gold tellurides, and roscoelite in several deposits is primarily a function of similar physicochemical conditions during deposition (for example, overlapping pH and oxygen fugacity ( f O2). Potential environmental impacts related to the mining and processing of alkalic-type epithermal gold deposits include acid mine drainage with high levels of metals, especially zinc (Zn), copper, lead (Pb), and arsenic. However, because alkalic-type gold deposits typically contain carbonates, which contribute calcium and magnesium ions that increase water hardness, aquatic life may be afforded some protection. Impacts vary widely as a function of host rocks, climate, topography, and mining methods. Geologic mapping to (1) highlight the distribution of potassic alteration; (2) define fault density and orientation of structures; (3) determine the distribution of alkaline rocks and hydrothermal breccias; and (4) identify uniquely colored gangue minerals, such as fluorite and roscoelite, will be critical to exploration and future discoveries. Geophysical techniques that identify potassium (K) anomalies (for example, radiometric and spectroscopic surveys), as well as magnetic, resistivity, aeromagnetic, and gravity surveys, may help locate zones of high-permeability that control advecting hydrothermal fluids. Geochemical surveys that include analyses for Au, Ag, barium, Te, K, F, V, Mo, and mercury, which are key elements in these deposits, should be undertaken along with the measurement of other pathfinder elements such as arsenic, bismuth, Cu, iron, nickel, Pb, antimony, selenium, and Zn.

Scientific Investigations Report↗
USGS1967

Results of the second phase of the drought-disaster test-drilling program near Morristown, N.J.

The continued drought in northeastern New Jersey through the summer of 1966 with its attendant water-supply problems resulted in an extension of the drought-disaster test-drilling program originally requested by the Office of Emergency Planning on August 30, 1965. Authorization to continue test drilling was fiven by the Office of Emergency Planning on September 26, 1966, with the stipulation that all field work be complete by January 31, 1977. Contractural costs were paid by the Office of Emergency Planning, whereas personnel costs were shared by the U.S. Geological Survey and the New Jersey Department of Conservation and Economic Development, Division of Water Policy and Supply. The work undertaken in 1965 by the Geological Survey was "...to preform the necessary drilling and testing of wells to identify the extent and nature of a reserve ground-water source in the vicinity of the Passaic River near the northern New Jersey metropolitan area." Results of this first phase were made available in the fall of 1966 in Water Resources Circular 16 of the New Jersey Department of Conservation and Economic Development. Three of the five areas tested (figure 1)--two in Parsippany-Troy Hills Township (areas 2 and 4) and one in East Hanover Township (area 1), Morris County--proved capable of providing an aggregate sustained yield of 7.5 million gallons daily (mgd) from wells constructed in sand and gravel deposits. Because significant supplies of ground water for emergency use were located in the first phase of the exploratory test-drilling program, it was though desirable to extend the originally planned studies so as to obtain maximum practicable information on emergency supplies. During this second phase of the investigation, drilling was conducted in 16 sites in Chatham, Madison, and Florham Park Boroughs and in Hanover and East Hanover Townships, Morris County. (See figure 2.) The drilling in Hanover and East Hanover Townships, and part of the drilling done in Florham Park was to explore the availability of large undeveloped ground-water supplies. Drilling in Chatham, Madison, and Florham Park Boroughs was done primarily to determine the extent and continuity of buried valley-fill aquifers, so that a full evaluation of the effects of pumpage from other areas on these already heavily pumped areas could be made. In addition, it was anticipated that the drilling could help in defining the feasibility of artificial recharge of the heavily pumped areas and in the determination of the prospective method of recharge and points of emplacement. Arrangements for easements with landowners, preparation of specifications for well drilling and seismic work, and supervision of well drilling and seismic contracts were all performed by the New Jersey District, Water Resources Division of the Geological Survey. Prior to the test drilling, seismic exploration under contract with Alpine Geophysical Associates of Norwood, N. J. was conducted at five locations in the Chatham-Madison-Florham Park area and at one place in Parsippany-Troy Hills Township. The seismic work was done to determine the most favorable location for a test well at several potential test-well sites and to help in the interpretation of subsurface geology between test sites. Contracts for the drilling of the test holes were awarded during November and drilling commences on November 30. Kaye Well drilling, Inc. of Jackson, N. J. was the recipient of a contract for eight of the test holes, and a second contract was awarded to Rinbrand Well Drilling Co., Inc. of Glen Rock, N. J.--also for eight test holes. Acknowledgment is due to the many public officials of Chatham, Madison, Florham Park, Morristown, and East Hanover Township as well as officials of the Braidburn Corporation and Esso Research and Engineering Co., who cooperated by making their lands available for exploration.

New Jersey↗
USGS2023

Geologic and geophysical maps of the Stockton 30’ × 60’ quadrangle, California

This pamphlet and accompanying geologic and geophysical maps are the products of cooperative efforts by the California Geological Survey (CGS) and United States Geological Survey (USGS) to compile a comprehensive, digital representation of the bedrock geology, Quaternary surficial deposits, and potential-field anomalies within the boundaries of the Stockton 30’ × 60’ quadrangle. The Stockton 30’ × 60’ quadrangle covers approximately 4,890 km 2 of Contra Costa, Alameda, San Joaquin, and Stanislaus Counties, California. From the rugged hillsides of the northern Diablo Range in the west to the San Joaquin Valley in the east, the map extends roughly 88 km across growing suburban communities of the eastern San Francisco Bay Area and Livermore Valley, grass-covered ranchlands along eastern slopes of the Diablo Range, and into the low farmlands of the San Joaquin Valley and Sacramento-San Joaquin River Delta (Figure 1). The elevation ranges from near sea level in the Delta to 1,173 meters on Mt. Diablo, the most prominent peak of the San Francisco Bay region.

California↗
USGS2014

Geologic and geophysical data for wells drilled at Raft River Valley, Cassia County, Idaho, in 1977-1978 and data for wells drilled previously

In order to better define the size of the thermal anomaly in the Raft River Valley, Idaho, the U.S. Geological Survey drilled a series of intermediate-depth (nominal 500-ft depth) wells in 1977 and 1978. This report presents geologic, geophysical, and temperature data for these drill holes, along with data for five wells drilled by the Idaho National Engineering Laboratory with U.S. Department of Energy Funding. Data previously reported for other drill holes are also included in order to make them available as digital files. For purposes of defining the thermal anomaly for the geothermal system, temperature gradients are calculated over long depth intervals on the basis of the appearance of reasonable linear segments on a temperature versus plot depth. Temperature versus depth data for some drill holes can be represented by a single gradient, whereas others require multiple gradients to match the data. Data for some drill holes clearly reflect vertical flows of water in the formation surrounding the drill holes, and water velocities are calculated for these drill holes. Within The Narrows area, temperature versus depth data show reversals at different depth in different drill holes. In the main thermal area, temperatures in intermediate-depth drill holes vary approximately linearly but with very high values of temperature gradient. Temperature gradients on a map of the area can be reasonable divided into a large area of regional gradients and smaller areas defining the thermal anomalies.

Idaho↗
USGS2011

High-resolution geophysical data from the sea floor surrounding the Western Elizabeth Islands, Massachusetts

Geophysical and geospatial data were collected in the nearshore area surrounding the western Elizabeth Islands, Massachusetts on the U.S. Geological Survey research vessel Rafael during September 2010 in a collaborative effort between the U.S. Geological Survey and the Massachusetts, Office of Coastal Zone Management. This report describes the results of the short-term goals of this collaborative effort, which were to map the geology of the inner shelf zone of the western Elizabeth Islands and study the geologic processes that have contributed to its evolution. Data collected during the survey include: Bathymetric and sidescan-sonar data, chirp seismic-reflection data , sound velocity profiles, and navigation data. The long-term goals of this project are to provide high-resolution geophysical data that will support research on the influence of sea-level change and sediment supply on coastal evolution and inventory subtidal marine habitat type and distribution within the coastal zone of Massachusetts.

Massachusetts↗