Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Processes”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56Linked to original sources
USGS2004

Hydrologic processes in deep vadose zones in interdrainage arid environments

A unifying theory for the hydrology of desert vadose zones is particularly timely considering the rising population and water stresses in arid and semiarid regions. Conventional models cannot reconcile the apparent discrepancy between upward flow indicated by hydraulic gradient data and downward flow suggested by environmental tracer data in deep vadose zone profiles. A conceptual model described here explains both hydraulic and tracer data remarkably well by incorporating the hydrologic role of desert plants that encroached former juniper woodland 10 to 15 thousand years ago in the southwestern United States. Vapor transport also plays an important role in redistributing moisture through deep soils, particularly in coarse-grained sediments. Application of the conceptual model to several interdrainage arid settings reproduces measured matric potentials and chloride accumulation by simulating the transition from downward flow to upward flow just below the root zone initiated by climate and vegetation change. Model results indicate a slow hydraulic drying response in deep vadose zones that enables matric potential profiles to be used to distinguish whether precipitation episodically percolated below the root zone or was completely removed via evapotranspiration during the majority of the Holocene. Recharge declined dramatically during the Holocene in interdrainage basin floor settings of arid and semiarid basins. Current flux estimates across the water table in these environmental settings, are on the order of 0.01 to 0.1 mm yr -1 and may be recharge (downward) or discharge (upward) depending on vadose zone characteristics, such as soil texture, geothermal gradient, and water table depth. In summary, diffuse recharge through the basin floor probably contributes only minimally to the total recharge in arid and semiarid basins.

Water Science and Application↗
USGS2011

Tectono-magmatic processes investigated at deep-water flanks of Hawaiian volcanoes

Hawaiian volcanoes are exceptional examples of intraplate hotspot volcanism. Hotspot volcanoes, which frequently host large eruptions and related earthquakes, flank‐failure landslides, and associated tsunamis, can present severe hazards to populated regions. Many studies have focused on subaerial parts of Hawaiian volcanoes, but the deep‐water flanks of the edifices, which can reach 5700 m below sea level, remain poorly understood because they are so inaccessible. In 1998 a collaborative program between Japan and the United States was initiated to explore the evolution of Hawaiian volcanoes, including their growth and degradation

Hawaii↗
USGS2004

Tectonic processes during oblique collision: Insights from the St. Elias orogen, northern North American Cordillera

Oblique convergence in the St. Elias orogen of southern Alaska and northwestern Canada has constructed the world's highest coastal mountain range and is the principal driver constructing all of the high topography in northern North America. The orogen originated when the Yakutat terrane was excised from the Cordilleran margin and was transported along margin-parallel strike-slip faults into the subduction-transform transition at the eastern end of the Aleutian trench. We examine the last 3 m.y. of this collision through an analysis of Euler poles for motion of the Yakutat microplate with respect to North America and the Pacific. This analysis indicates a Yakutat-Pacific pole near the present southern triple junction of the microplate and' predicts convergence to dextral-oblique convergence across the offshore Transition fault, onland structures adjacent to the Yakutat foreland, or both, with plate speeds increasing from 10 to 30 mm/yr from southeast to northwest. Reconstructions based on these poles show that NNW transport of the collided block into the NE trending subduction zone forced contraction of EW line elements as the collided block was driven into the subduction-transform transition. This suggests the collided block was constricted as it was driven into the transition. Constriction provides an explanation for observed vertical axis refolding of both earlier formed fold-thrust systems and the collisional suture at the top of the fold-thrust stack. We also suggest that this motion was partially accommodated by lateral extrusion of the western portion of the orogen toward the Aleutian trench. Important questions remain regarding which structures accommodated parts of this motion. The Transition fault may have accommodated much of the Yakutat-Pacific convergence on the basis of our analysis and previous interpretations of GPS-based geodetic data. Nonetheless, it is locally overlapped by up to 800 m of undeformed sediment, yet elsewhere shows evidence of young deformation. This contradiction could be produced if the overlapping sediments are too young to have accumulated significant deformation, or GPS motions may be deflected by transient strains or strains from poorly understood fault interactions. In either case, more data are needed to resolve the paradox. Copyright 2004 by the American Geophysical Union.

Tectonics↗
USGS2011

Interdisciplinary discussion of volcanic processes beneath the Long Valley Caldera-Mono Craters Area

Volcanism in the Long Valley Caldera-Mono Craters (LVCMC) volcanic field in eastern California over the past 4 Ma is dominated by the 0.76 Ma caldera-forming eruption of 600 km 3 of rhyolite to form the Bishop Tuff. Over the last 150 k.y., volcanism has concentrated along the Mono-Inyo chain, which extends 45 km north from Mammoth Mountain to Mono Lake (Figure 1, below). Recent eruptions along this chain have occurred from multiple vents 650±50 yr B.P. and from a vent in the middle of Mono Lake ∼300 yr B.P. An earthquake swarm in May 1980, including four M6 earthquakes accompanied by uplift of the resurgent dome in the center of the caldera, called attention to the restless nature of Long Valley caldera. Subsequent activity has included recurring swarms of earthquakes (M≤5.8), episodic uplift of the resurgent dome, diffuse outgassing of magmatic CO 2 , and mid-crustal (10- to 25- km deep), long period (LP) volcanic earthquakes.

California↗
USGS2005

East Molokai and other Kea-trend volcanoes: Magmatic processes and sources as they migrate away from the Hawaiian hot spot

[1] There are geochemical differences between shield lavas from the two parallel trends, Kea and Loa, defined by young Hawaiian volcanoes. The shield of East Molokai volcano, at greater than 1.5 Ma, is the oldest volcano on the Kea trend. Sequences of older tholeiitic to younger alkalic basalt that erupted as this volcano evolved from the shield to postshield stage of volcanism are well exposed. Much younger, ∼0.34–0.57 Ma, alkalic basalt and basanite erupted during rejuvenated stage volcanism. Like rejuvenated stage lavas erupted at other Hawaiian volcanoes, rejuvenated stage East Molokai lavas have relatively low 87 Sr/ 86 Sr and high 143 Nd/ 144 Nd. Such ratios reflect a source component with a long-term depletion in abundance of incompatible elements. On the basis of positive correlations of 87 Sr/ 86 Sr versus 206 Pb/ 204 Pb and negative correlations of these isotopic ratios with Nb/Zr, a smaller proportion of this depleted component also contributed to the late shield/postshield lavas erupted at East Molokai and the other Kea-trend volcanoes, Haleakala and Mauna Kea. At each of these Kea-trend volcanoes, as the volcano moved away from the hot spot, the extent of melting and magma supply from the mantle decreased, the depth of melt segregation increased, and there was an increasing role for a component with long-term relative depletion in incompatible elements. This depleted component has Kea-trend Pb isotopic characteristics and relatively low 208 Pb/ 204 Pb at a given 206 Pb/ 204 Pb, and it is probably not related to oceanic lithosphere or the source of mid-ocean ridge basalt. The overlap in Sr, Nd, and Pb isotope ratios of recent Kilauea shield lavas and 550 ka Mauna Kea shield lavas has been used to argue that Kea-trend shield volcanism samples a vertically continuous, geochemically distinct stripe which persisted in the hot spot source for 550 kyr (Eisele et al., 2003; Abouchami et al., 2005). As Kea-trend volcanoes migrate away from the hot spot and evolve from the shield to postshield stage, there are systematic changes in Sr, Nd, and Pb isotope ratios. However, the overlap of Sr, Nd, and Pb isotope ratios in late shield/postshield lavas from Mauna Kea (<350 ka) and East Molokai (∼1.5 Ma) show that the periphery of the hot spot sampled by Kea-trend postshield lavas also had long-term geochemical homogeneity.

Hawai'i↗
USGS2008

Hydrothermal processes at Gusev Crater: An evaluation of Paso Robles class soils

The Mars Exploration Rover Spirit analyzed multiple occurrences of sulfur-rich, light-toned soils along its traverse within Gusev Crater. These hydrated deposits are not readily apparent in images of undisturbed soil but are present at shallow depths and were exposed by the actions of the rover wheels. Referred to as 'Paso Robles' class soils, they are dominated by ferric iron sulfates, silica, and Mg-sulfates. Ca-sulfates, Ca-phosphates, and other minor phases are also indicated in certain specific samples. The chemical compositions are highly variable over both centimeter-scale distances and between the widely separated exposures, but they clearly reflect the elemental signatures of nearby rocks. The quantity of typical basaltic soil mixed into the light-toned materials prior to excavation by the rover wheels is minimal, suggesting negligible reworking of the deposits after their initial formation. The mineralogy, geochemistry, variability, association with local compositions, and geologic setting of the deposits suggest that Paso Robles class soils likely formed as hydrothermal and famarolic condensates derived from magma degassing and/ or oxidative alteration of crustal iron sulfide deposits. Their occurrence as unconsolidated, near-surface soils permits, though does not require, an age that is significantly younger than that of the surrounding rocks. Copyright 2008 by the American Geophysical Union.

Journal of Geophysical Research E: Planets↗
USGS2011

Active aeolian processes on Mars: A regional study in Arabia and Meridiani Terrae

We present evidence of widespread aeolian activity in the Arabia Terra/Meridiani region (Mars), where different kinds of aeolian modifications have been detected and classified. Passing from the regional to the local scale, we describe one particular dune field in Meridiani Planum, where two ripple populations are distinguished by means of different migration rates. Moreover, a consistent change in the ripple pattern is accompanied by significant dune advancement (between 0.4–1 meter in one Martian year) that is locally triggered by large avalanche features. This suggests that dune advancement may be common throughout the Martian tropics.

Geophysical Research Letters↗
USGS2018

Planetary dune workshop expands to include subaqueous processes

Dune-like structures appear in the depths of Earth’s oceans, across its landscapes, and in the extremities of the solar system beyond. Dunes rise up under the thick dense atmosphere of Venus, and they have been found under the almost unimaginably ephemeral atmosphere of a comet.

Eos, Earth and Space Science News↗
USGS2019

Pace and process of active folding and fluvial incision across the Kantishna Hills anticline, central Alaska

Rates of northern Alaska Range thrust system deformation are poorly constrained. Shortening at the system's west end is focused on the Kantishna Hills anticline. Where the McKinley River cuts across the anticline, the landscape records both Late Pleistocene deformation and climatic change. New optically stimulated luminescence and cosmogenic 10 Be depth profile dates of three McKinley River terrace levels (~22, ~18, and ~14–9 ka) match independently determined ages of local glacial maxima, consistent with climate‐driven terrace formation. Terrace ages quantify rates of differential bedrock incision, uplift, and shortening based on fault depth inferred from microseismicity. Differential rock uplift and incision (≤1.4 m/kyr) drive significant channel width narrowing in response to ongoing folding at a shortening rate of ~1.2 m/kyr. Our results constrain northern Alaska Range thrust system deformation rates, and elucidate superimposed landscape responses to Late Pleistocene climate change and active folding with broad geomorphic implications.

Alaska↗
USGS2018

Floor-fractured craters on Ceres and implications for interior processes

Several of the impact craters on Ceres have sets of fractures on their floors. These fractures appear similar to those found within a class of lunar craters referred to as floor-fractured craters (FFCs). We have cataloged the Ceres FFCs according to the classification scheme designed for the Moon. An analysis of the depth to diameter ratio for Ceres craters shows that, like lunar FFCs, the Ceres FFCs are anomalously shallow. Large (>50 km) Ceres FFCs are most consistent with Class 1 lunar FFCs, while smaller craters on Ceres are more consistent with Class 4 lunar FFCs. This suggests that Ceres FFCs may similarly be undergoing fracturing due to the intrusion of a low-density material below the craters. While on the Moon (and Mars) the intrusive material is hypothesized to be silicate magma, cryomagmatic intrusions are more likely responsible for the formation of the Ceres FFCs. However, new models suggest that at least some of the FFC fractures may have formed due to the solid-state flow of a low-viscosity and low-density material into the crater wall.

Journal of Geophysical Research↗
USGS2022

A process-model perspective on recent changes in the carbon cycle of North America

Continental North America has been found to be a carbon (C) sink over recent decades by multiple studies employing a variety of estimation approaches. However, several key questions and uncertainties remain with these assessments. Here we used results from an ensemble of 19 state-of-the-art dynamic global vegetation models from the TRENDYv9 project to improve these estimates and study the drivers of its interannual variability. Our results show that North America has been a C sink with a magnitude of 0.37 ± 0.38 (mean and one standard deviation) PgC year −1 for the period 2000–2019 (0.31 and 0.44 PgC year −1 in each decade); split into 0.18 ± 0.12 PgC year −1 in Canada (0.15 and 0.20), 0.16 ± 0.17 in the United States (0.14 and 0.17), 0.02 ± 0.05 PgC year −1 in Mexico (0.02 and 0.02) and 0.01 ± 0.02 in Central America and the Caribbean (0.01 and 0.01). About 57% of the new C assimilated by terrestrial ecosystems is allocated into vegetation, 30% into soils, and 13% into litter. Losses of C due to fire account for 41% of the interannual variability of the mean net biome productivity for all North America in the model ensemble. Finally, we show that drought years (e.g., 2002) have the potential to shift the region to a small net C source in the simulations (−0.02 ± 0.46 PgC year −1 ). Our results highlight the importance of identifying the major drivers of the interannual variability of the continental-scale land C cycle along with the spatial distribution of local sink-source dynamics.

Journal of Geophysical Research Biogeosciences↗
USGS2023

Crustal structure across the central Dead Sea Transform and surrounding areas: Insights into tectonic processes in continental transforms

New geophysical profiles across the central Dead Sea Transform (DST) near the Sea of Galilee, Israel, and surrounding highlands, augmented by static stress modeling, allow us to study continental transform plate deformation. The DST separates a ∼10 km thick sedimentary column above a thinned (16–23 km) crust to the west from a ∼7 km column above a ∼30-km thick crust to the east. Crustal thinning starts under the DST, as observed also farther south, indicating that the DST is indeed located along the boundary between the Arabian plate and its continental margin. Moho step here is gradual. The DST's eastern shoulder dips westward toward the DST unlike the upward flexed shoulder observed farther south, perhaps delineating the northern limit of a thinner and hotter lithosphere. The shape of the Sea of Galilee is modeled as an asymmetric pull-apart basin formed by a left-lateral stepover of 2.6 km between slightly divergent and underlapping strike-slip fault strands dipping 70° to the west. Reflection data indicate that these strands are not connected. Several fault traces within the Sea of Galilee have previously been suggested to carry part of the relative plate motion. However, given slip along the main DST faults, Coulomb stress will increase only on fault portions in the northern part of the lake, in accord with the geographical distribution of seismicity, suggesting that these faults are likely secondary. Mismatch between the DST strand locations in the geophysical profiles and the subsidence model, may reflect temporal changes in fault geometry.

Tectonics↗
USGS2025

Properties of new flows indicate that Martian gullies form via CO2 frost-fluidization processes

Martian gully landforms are widely seen as evidence of liquid water, often attributed to snowmelt during high-obliquity periods within the last few million years. However, widespread present-day flows within existing gullies are caused by CO 2 frost, presenting an alternative formation mechanism. Entrained frost vapourizes to fluidize flows, allowing them to behave similarly to wet debris flows on Earth. The slopes where present-day flows erode and deposit provide insights into the landforms that many such flows could create. The shallowest slopes eroded by the flows are similar to slopes at existing channel mouths, and the most mobile flows reach final slopes similar to the outer reaches of existing gully aprons. This is consistent with formation of gullies entirely by CO 2 frost-driven flows, assuming their intensity and frequency varies in space and time. Geologically recent snowmelt cannot be ruled out, but is not required to explain the observed gully morphology.

Geophysical Research Letters↗
USGS2025

Toward a new framework to evaluate process-based model configurations and quantify data worth prior to calibration

Model criticism, discrimination, and selection methods often rely on calibrated model outputs. Because calibration can be computationally expensive, model criticism can first be undertaken by assessing model outputs obtained from limited prior parameter ensembles. However, such prior-based methods are often heuristic and do not formalize the notion of balancing model consistency with data and model complexity (i.e., model adequacy). We present a new framework to discriminate among candidate models prior to calibration that formalizes prior-to-calibration model adequacy into a metric to implicitly balance prior model output data coverage with model complexity represented by prior output (co)variance. The prior model adequacy metric “Mahalanobis distance deviation” quantifies the deviation of (a) the set of squared Mahalanobis distances of data from a prior model output distribution from (b) the set of squared Mahalanobis distances of data from their own distribution. A new data worth metric “discernment value” is also presented which quantifies the value of data for screening less-adequate models prior to calibration. Discernment value is calculated from the change in variance of a weighted average of prior model outputs from all candidate models due to less-adequate model outputs receiving lower weight. The framework is demonstrated using a one-dimensional groundwater flow model with eight possible configurations. A synthetic data network is used to test the framework. Results show the framework identifies the candidate models most similar to the true model used to create the synthetic data. Discernment values show variation in the value of different data types and locations for screening less-adequate models.

Water Resources Research↗
USGS2025

Natural source zone depletion of crude oil in the subsurface: Processes controlling mass losses of individual compounds

At many petroleum hydrocarbon spill sites, residual spilled product forms a long-term source of groundwater contamination. The phrase source zone natural depletion is used to refer to the mass loss rates. Overall mass lost under environmental conditions was analyzed using conservative biomarker concentrations for a 1979 oil spill in northern Minnesota, USA. After 40–41 years, an average of 50% of the mass was lost with values ranging from 22% to 57% depending on location. It is also important to understand the composition changes in the source. To understand controls on the losses of individual compounds, concentrations of volatile hydrocarbons in oil samples were compared with aqueous solubilities, and pore-space oil saturations. The results of the comparison show that losses of the oil compounds were controlled by pore-space oil saturations, solubility, and susceptibility to degradation under methanogenic conditions. Compounds that degrade under methanogenic conditions, including toluene, o -xylene, and n -alkanes are more depleted compared to benzene, ethylbenzene, and m - and p -xylene for which losses are dominated by dissolution. These rates and compound-specific behaviors form a foundation for improved modeling approaches and risk analyses.

Minnesota↗
USGS2010

Hydrologic processes controlling sulfate mobility in a small forested watershed

Hydrologic controls on sulfate mobility were investigated in a forested catchment in the Georgia Piedmont using a watershed mass balance approach. Variations in annual sulfate export were governed primarily by differences in runoff rather than by differences in sulfate deposition or in total annual precipitation. However, 2 years with similar total runoff had substantially different sulfate export. A residual analysis indicated that a shift in the concentration‐discharge relationship accounted for 72% of the difference in sulfate export and that a change in the pattern of discharge accounted for the remainder of the difference. Stream water sulfate concentrations reflected past hydrologic conditions. Concentrations at the same discharge were higher following an extended dry period than following average periods. The elevation in stream water sulfate concentrations following dry periods persisted for several months. The influence of rainfall patterns on sulfate export underscores the need for long‐term records to adequately characterize the acidification status of the watershed and to understand trends in water quality.

Georgia↗
USGS2010

Chlorofluorocarbons as tracers of groundwater transport processes in a shallow, silty sand aquifer

Detailed depth profiles of Chlorofluorocarbons CFC-11(CFCl 3 (, CFC-12 (CF 2 Cl 2 ) and CFC-113 (C 2 F 3 Cl 3 ) have been obtained from a well-characterized field site in central Ontario. Aquifer materials comprise predominantly silty sands, with a mean organic carbon content of 0.03%. Nearly one-dimensional flow exists at this site, and the vertical migration of a well-defined 3 H peak has been tracked through time. Detailed vertical sampling has allowed CFC tracer velocities to be estimated to within 10%. Comparison with 3 H profiles enables estimation of chlorofluorocarbon transport parameters. CFC-12 appears to be the most conservative of the CFCs measured. Sorption at this site is low ( K d < 0.03), and degradation does not appear to be important. CFC- 113 is retarded both with respect to CFC-12 and with respect to 3 H ( K d = 0.09−0.14). CFC-11 appears to be degraded both in the highly organic unsaturated zone and below 3.5 m depth in the aquifer, where dissolved oxygen concentrations decrease to below 0.5 mg L −1 . The half-life for CFC-11 degradation below 3.5 m depth is less than 2 years. While apparent CFC-12 ages match hydraulic ages to within 20% (up to 30 years), apparent CFC-11 and CFC-113 ages significantly overestimate hydraulic ages at our field site.

Water Resources Research↗