SEARCH · Geology Reports

Results for “Rock Products”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55Linked to original sources

USGS2019

Assessment of undiscovered copper resources of the world, 2015

The U.S. Geological Survey completed the first-ever global assessment of undiscovered copper resources for the two most significant sources of global copper supply: porphyry copper deposits and sediment-hosted stratabound copper deposits. The geology-based study identified 236 areas for undiscovered copper in 11 regions of the world. Estimated amounts of undiscovered copper resources are reported at different levels of probability. The results of the assessment indicate that a mean of at least 3,500 million metric tons (Mt) of undiscovered copper associated with these deposit types may exist worldwide, exceeding the 2,100 Mt of identified copper resources tabulated for these deposit types. Porphyry copper deposits contain 1,800 Mt of identified copper resources and are estimated to contain a mean of at least 3,100 Mt of undiscovered copper resources. South America is the dominant source for both identified and undiscovered porphyry copper resources. However, several regions of Asia, including China, have significant potential for undiscovered porphyry copper resources. The amount of mean undiscovered porphyry copper resources that may be economic to extract varies as a function of likely depth to a deposit and quality of local infrastructure that could support mining. Sediment-hosted stratabound copper deposits contain 310 Mt of identified copper resources and are estimated to contain a mean of at least 420 Mt of undiscovered copper resources. The sedimentary basins that may contain significant undiscovered copper resources are the Katanga Basin in central Africa, the Southern Permian Basin of Poland and Germany, the Chu-Sarysu Basin of Kazakhstan, and the Kodar-Udokan area of Russia. Sedimentary basins in the Northwest Botswana Rift in Botswana and Namibia, the Benguela and Cuanza Basins of Angola, and the Cambrian rocks of Egypt, Israel, and Jordan are recognized as having significant potential for undiscovered copper resources in sediment-hosted stratabound copper deposits; however, these areas require additional research, analysis, and evaluation before quantitative resource estimates can be made. The estimate of at least 3,500 Mt of undiscovered copper in two deposit types provides a basis for long-range planning for this important commodity. U.S. copper consumption is 2 Mt per year, world consumption is about 20 Mt per year, and global production from these two deposit types is about 12 Mt per year. Total global copper production from all deposit types from 1879 to 2012 was about 600 Mt. The world’s use of mineral resources, such as copper, will continue to increase in the foreseeable future to support a growing world population and increasing standards of living. The world has sufficient copper to last for decades. However, increases in exploration and growth in mining capacity will be necessary to identify and develop undiscovered resources to supply projected demand.

Scientific Investigations Report↗

USGS2011

Ages and sources of components of Zn-Pb, Cu, precious metal, and platinum group element deposits in the goodsprings district, Clark County, Nevada

The Goodsprings district, Clark County, Nevada, includes zinc-dominant carbonate replacement deposits of probable late Paleozoic age, and lead-dominant carbonate replacement deposits, copper ± precious metal-platinum group element (PGE) deposits, and gold ± silver deposits that are spatially associated with Late Triassic porphyritic intrusions. The district encompasses ~500 km 2 although the distribution of all deposits has been laterally condensed by late Mesozoic crustal contraction. Zinc, Pb, and Cu production from about 90 deposits was ~160,000 metric tons (t) (Zn > Pb >> Cu), 2.1 million ounces (Moz) Ag, 0.09 Moz Au, and small amounts of PGEs—Co, V, Hg, Sb, Ni, Mo, Mn, Ir, and U—were also recovered. Zinc-dominant carbonate replacement deposits (Zn > Pb; Ag ± Cu) resemble Mississippi Valley Type (MVT) Zn-Pb deposits in that they occur in karst and fault breccias in Mississippian limestone where the southern margin of the regional late Paleozoic foreland basin adjoins Proterozoic crystalline rocks of the craton. They consist of calcite, dolomite, sphalerite, and galena with variably positive S isotope compositions ( δ 34 S values range from 2.5–13‰), and highly radiogenic Pb isotope compositions ( 206 Pb/ 204 Pb >19), typical of MVT deposits above crystalline Precambrian basement. These deposits may have formed when southward flow of saline fluids, derived from basinal and older sedimentary rocks, encountered thinner strata and pinch-outs against the craton, forcing fluid mixing and mineral precipitation in karst and fault breccias. Lead-dominant carbonate replacement deposits (Pb > Zn, Ag ± Cu ± Au) occur among other deposit types, often near porphyritic intrusions. They generally contain higher concentrations of precious metals than zinc-dominant deposits and relatively abundant iron oxides after pyrite. They share characteristics with copper ± precious metal-PGE and gold ± silver deposits including fine-grained quartz replacement of carbonate minerals in ore breccias and relatively low S and Pb isotope values ( δ 34 S values vary from 0–~4‰; 206 Pb/ 204 Pb <18.5). Copper ± precious metal-PGE deposits (Cu, Co, Ag, Au, Pd, and Pt) consist of Cu carbonate minerals (after chalcocite and chalcopyrite) and fine-grained quartz that have replaced breccia clasts and margins of fissures in Paleozoic limestones and dolomites near porphyritic intrusions. Gold ± silver deposits occur along contacts and within small-volume stocks and dikes of feldspar porphyry, one textural variety of porphyritic intrusions. Lead isotope compositions of copper ± precious metal-PGE, gold ± silver, and lead-dominant carbonate replacement deposits are similar to those of Mojave crust plutons, indicating derivation of Pb from 1.7 Ga crystalline basement or from Late Proterozoic siliciclastic sedimentary rocks derived from 1.7 Ga crystalline basement. Four texturally and modally distinctive porphyritic intrusions are exposed largely in the central part of the district: feldspar quartz porphyry, plagioclase quartz porphyry, feldspar biotite quartz porphyry, and feldspar porphyry. Intrusions consist of 64 to 70 percent SiO 2 and variable K 2 O/Na 2 O (0.14–5.33) that reflect proportions of K-feldspar and albite phenocrysts and megacrysts as well as partial alteration to K-mica; quartz and biotite phenocrysts are present in several subtypes. Albite may have formed during emplacement of magma in brine-saturated basinal strata, whereas hydrothermal alteration of matrix, phenocrystic, and megacrystic feldspar and biotite to K-mica, pyrite, and other hydrothermal minerals occurred during and after intrusion emplacement. Small volumes of garnet-diopside-quartz and retrograde epidote-mica-amphibole skarn have replaced carbonate rocks adjacent to one intrusion subtype (feldspar-quartz porphyry), but alteration of carbonate rocks at intrusion contacts elsewhere is inconspicuous. Uranium-lead ages of igneous zircons vary inconsistently from ~ 180 to 230 Ma and are too imprecise to distinguish age differences among intrusion subtypes; most ages are 210 to 225 Ma, yielding a mean of 217 ± 1 Ma. K-Ar and 40 Ar/ 39 Ar ages of magmatic (plagioclase, biotite) and hydrothermal (K-mica) minerals span a similar range (183–227 Ma), demonstrating broadly contemporaneous intrusion emplacement and hydrothermal alteration but allowing for multiple Late Triassic magmatic-hydrothermal events. Imprecision and range of isotopic ages may have resulted from burial beneath Mesozoic and Tertiary strata and multiple intrusion of magmas, causing thermal disturbance to Ar systems and Pb loss from zircons in intrusions. Separate late Paleozoic (zinc-dominant carbonate replacement deposits) and Late Triassic (all other deposits) mineralizing events are supported by form, distribution, and host rocks of metal deposits, by hydrothermal mineral assemblages, isotope compositions, metal abundances, and metal diversity, and by small intrusion volumes. These characteristics collectively distinguish the Goodsprings district from larger intrusion related carbonate replacement districts in the western United States. They can be used to evaluate proximity to unexposed porphyritic intrusions associated with PGE and gold ± silver mineralization.

Nevada↗

USGS2005

Mudstone sedimentation at high latitudes: Ice as a transport medium for mud and supplier of nutrients

Controls on mudstone deposition at high latitudes are poorly known relative to low latitudes. In recent sediments deposited in these environments, ice significantly influences sediment transport and primary productivity. The products of ice transport are relatively well known in glacimarine settings, but are less well known from below melting sea ice. This latter setting is significant as today it is associated with high primary organic productivity. The aim of this study is to assess how sea ice might have controlled lithofacies variability and organic-matter distribution and preservation in an ancient marine, siliciclastic mudstone-dominated succession deposited at high latitudes. Combined sedimentary logging, optical and electron optical (back-scatte red electron imagery), geochemical, and isotopic methods were used to determine sample variability in forty-five samples collected from the Lower Cretaceous succession in the Mikkelsen Bay State #1 borehole (North Slope, Alaska). The succession overall fines upward and contains muddy sandstones and sand- and silt-bearing, clay-rich mudstones towards its base in contrast to clay-rich and clay-dominated mudstones towards its top. Some of the mudstone units exhibit thin (< 5 mm), relic-beds that fine upward weakly. In some units small (0.5 mm), bed-parallel silt-filled microburrows disrupt depositional laminae whereas in others pervasive burrowing completely obliterates original depositional textures. Many of the units are pelleted. These mudstones are unusual in that they contain minor but very striking outsize grains, composed of subrounded to rounded sand and granule-size material. In addition, they are good petroleum source rocks, with between 2.8 and 5.9 wt % total organic carbon, of predominantly Type II kerogen. The organic matter has an isotopic signature ranging from -25.4??? ??13C to -28.1??? ??13C. Thin tuffs (< 20 mm) and carbonate-cemented units are also present. Given the absence of significant polar ice in the Early Cretaceous the outsized grains are interpreted to have been deposited from a combination of melting, dirty anchor, and fast ice. The mud fraction, which forms the bulk of the sediment, is interpreted to have been deposited from melting, sediment-laden frazil ice, and fast ice. After deposition sediments were partially reworked by bottom currents generated by brine rejection during sea ice formation. Sympagic organisms, grazing on algae and bacteria both within and below the ice, pelleted the sediment. Bioturbation, which varies through the succession, indicates that sedimentation probably occurred beneath a predominantly oxic or dysoxic water column. In this setting productivity was fueled by nutrients released from melting sea ice in the marginal ice zone. The good petroleum source potential of these mudstones is attributed to high organic productivity coupled to episodic and rapid sedimentation rather than existence of bottom-water anoxia linked to upwelling. Because sea-ice rafting was probably the dominant sediment transport mechanism it is not appropriate to use sequence stratigraphic methodology to predict lithofacies variability in this environment. Copyright ?? 2005, SEPM (Society for Sedimentary Geology).

Journal of Sedimentary Research↗

USGS1999

DBP formation of aquatic humic substances

Terrestrial vegetation commonly shed into reservoirs contains chemical precursors of DBPs. Aquatic humic substances (AHSs) in water generate potentially harmful disinfection by‐products (DBPs) such as haloacetic acids (HAAs) and trihalomethanes (THMs) during chlorination. AHSs from two Arkansas reservoirs were characterized to define source, identify meta‐dihydroxybenzene (m‐DHB) structures as probable DBP precursors, and evaluate predicted HAA and THM formation potentials. Elemental nitrogen content < 1 percent, phenol content > 0.5 μeq/mg, δ 13 C values of –27% o , and low yields of syringyl phenols found by cupric oxide (CuO) oxidation suggest a pine tree source for the AHSs found in the Maumelle and Winona reservoirs in Little Rock, Ark. CuO oxidation yielded fewer m‐DHB structures in Maumelle AHSs than in Winona AHSs. A higher 3,5‐dihydroxybenzoic acid (3,5‐DHBA) content correlated with increased HAA and THM formation potential. The 3,5‐DHBA concentration in Winona AHSs was similar to the range found in AHSs extracted from deciduous leaf litter, twigs, and grass leachates.

Journal - American Water Works Association↗

USGS1992

Organic matter diagenesis as the key to a unifying theory for the genesis of tabular uranium-vanadium deposits in the Morrison Formation, Colorado Plateau

Interstitial, epigenetic amorphous organic matter is intimately associated with uranium in the Grants uranium region on the southern part of the Colorado Plateau in northwestern New Mexico and is considered essential to genetic models for these deposits. In contrast, uranium minerals are intimately associated with authigenic vanadium chlorite and vanadium oxides in amorphous organic matter-poor ores of the Slick Rock and Henry Mountains mining districts on the northern part of the plateau, and therefore, in some genetic models amorphous organic matter is not considered crucial to the formation of these deposits. Differences in organic matter content can be explained by recognizing that amorphous organic matter-poor deposits have been subjected to more advanced stages of diagenesis than amorphous organic matter-rich deposits, during which organic compounds were broken down, solubilized, and removed during various diagenetic stages (e.g., sulfate reduction, methanogenesis, and organic acid production). Most diagenetic alterations (e.g., dissolution of framework grains and cements and precipitation of coarse-grained coffinite, vanadium clays, and vanadium oxides) characteristic of amorphous organic matter-poor deposits occurred when temperatures exceeded 80 degrees C--a temperature typical of the organic acid stage of diagenesis.Two factors combined to assure that a high percentage of the amorphous organic matter was removed from the Morrison Formation during diagenesis: the fact that the organic matter was humic (and therefore highly oxygenated), and that the juxtaposition of authigenic smectite and amorphous organic matter on grain rims facilitated clay mineral-organic catalysis reactions leading to the breakdown of large organic molecules into smaller, soluble molecules.Evidence that amorphous organic matter was involved in the genesis of organic matter-poor, as well as organic matter-rich, deposits includes the presence of leached iron-titanium oxides and strongly etched garnets (both attributed to leaching by organic acids), the gradation from organic matter-rich to organic matter-poor deposits in the Grants uranium region, the inverse correlation between the amount of amorphous organic matter and the intensity of diagenetic alteration, the ubiquitous occurrence of amorphous organic matter inclusions in coffinite, and the similarity in geometry of tabular uranium-vanadium ores and Holocene humate deposits. By recognizing that amorphous organic matter was crucial to the initial concentration of uranium (even in those deposits that presently contain little amorphous organic matter) and by recognizing the effects of the various stages of diagenesis on the ore, one genetic model may be applied to all of the sandstone-hosted, tabular-type uranium-vanadium deposits in the Morrison Formation on the Colorado Plateau.

Economic Geology↗

USGS2010

Geologic map of Lassen Volcanic National Park and vicinity, California

The geologic map of Lassen Volcanic National Park (LVNP) and vicinity encompasses 1,905 km 2 at the south end of the Cascade Range in Shasta, Lassen, Tehama, and Plumas Counties, northeastern California (fig. 1, sheet 3). The park includes 430 km 2 of scenic volcanic features, glacially sculpted terrain, and the most spectacular array of thermal features in the Cascade Range. Interest in preserving the scenic wonders of the Lassen area as a national park arose in the early 1900s to protect it from commercial development and led to the establishment in 1907 of two small national monuments centered on Lassen Peak and Cinder Cone. The eruptions of Lassen Peak in 1914-15 were the first in the Cascade Range since widespread settling of the West in the late 1800s. Through the printed media, the eruptions aroused considerable public interest and inspired renewed efforts, which had languished since 1907, to establish a national park. In 1916, Lassen Volcanic National Park was established by combining the areas of the previously established national monuments and adjacent lands. The southernmost Cascade Range is bounded on the west by the Sacramento Valley and the Klamath Mountains, on the south by the Sierra Nevada, and on the east by the Basin and Range geologic provinces. Most of the map area is underlain by middle to late Pleistocene volcanic rocks; Holocene, early Pleistocene, and late Pliocene volcanic rocks (<3.5 m.y.) are less common. Paleozoic and Mesozoic rocks are inferred to underlie the volcanic deposits (Jachens and Saltus, 1983), but the nearest exposures of pre-Tertiary rocks are 15 km to the south, 9 km to the southwest, and 12 km to the west. Diller (1895) recognized the young volcanic geology and produced the first geologic map of the Lassen area. The map (sheet 1) builds on and extends geologic mapping by Williams (1932), Macdonald (1963, 1964, 1965), and Wilson (1961). The Lassen Peak area mapped by Christiansen and others (2002) and published in greater detail (1:24,000) was modified for inclusion here. Figure 2 (sheet 3) shows the mapping credit for previous work; figure 3 (sheet 3) shows locations discussed throughout the text. A CD-ROM entitled Database for the Geologic Map of Lassen Volcanic National Park and Vicinity, California accompanies the printed map (Muffler and others, 2010). The CD-ROM contains ESRI compatible geographic information system data files used to create the 1:50,000-scale geologic map, both geologic and topographic data and their associated metadata files, and printable versions of the geologic map and pamphlet as PDF formatted files. The 1:50,000-scale geologic map was compiled from 1:24,000-scale geologic maps of individual quadrangles that are also included in the CD-ROM. It also contains ancillary data that support the map including locations of rock samples selected for chemical analysis (Clynne and others, 2008) and radiometric dating, photographs of geologic features, and links to related data or web sites. Data contained in the CD-ROM are also available on this Web site. The southernmost Cascade Range consists of a regional platform of basalt and basaltic andesite, with subordinate andesite and sparse dacite. Nested within these regional rocks are 'volcanic centers', defined as large, long-lived, composite, calc-alkaline edifices erupting the full range of compositions from basalt to rhyolite, but dominated by andesite and dacite. Volcanic centers are produced by the focusing of basaltic flux from the mantle and resultant enhanced interaction of mafic magma with the crust. Collectively, volcanic centers mark the axis of the southernmost Cascade Range. The map area includes the entire Lassen Volcanic Center, parts of three older volcanic centers (Maidu, Dittmar, and Latour), and the products of regional volcanism (fig. 4, sheet 3). Terminology used for subdivision of the Lassen Volcanic Center has been modified from Clynne (1984, 1990).

California↗

USGS2011

Characteristics, distribution, origin, and significance of opaline silica observed by the Spirit rover in Gusev crater, Mars

The presence of outcrops and soil (regolith) rich in opaline silica (∼65–92 wt % SiO 2 ) in association with volcanic materials adjacent to the “Home Plate” feature in Gusev crater is evidence for hydrothermal conditions. The Spirit rover has supplied a diverse set of observations that are used here to better understand the formation of silica and the activity, abundance, and fate of water in the first hydrothermal system to be explored in situ on Mars. We apply spectral, chemical, morphological, textural, and stratigraphic observations to assess whether the silica was produced by acid sulfate leaching of precursor rocks, by precipitation from silica‐rich solutions, or by some combination. The apparent lack of S enrichment and the relatively low oxidation state of the Home Plate silica‐rich materials appear inconsistent with the originally proposed Hawaiian analog for fumarolic acid sulfate leaching. The stratiform distribution of the silica‐rich outcrops and their porous and brecciated microtextures are consistent with sinter produced by silica precipitation. There is no evidence for crystalline quartz phases among the silica occurrences, an indication of the lack of diagenetic maturation following the production of the amorphous opaline phase.

Journal of Geophysical Research E: Planets↗

USGS2013

Groundwater–surface-water exchange and the geologic setting of northern Minnesota's lakes, wetlands, and streams—Modern-day relevance of Tom Winter's legacy

Tom Winter spent nearly 50 years conducting research in earth science, and he specialized in the exchange between groundwater and surface water. Tom's highly productive career began in Minnesota. This fi eld trip revisits many of the places where Tom conducted his early research and demonstrates the continuing relevance of that research. Stops and topics include the groundwater infl uence on the record low stage of White Bear Lake, the contribution of groundwater to continually rising water levels in an abandoned open-pit iron mine, hydrogeology of the Shingobee headwaters aquatic ecosystem research site, hydrogeology of Lake Sallie, geology associated with the Pillager water gap, and the hydrogeology of Little Rock Lake.

GSA Field Guides↗

USGS2008

Hydrogeology and water quality of the Leetown area, West Virginia

The U.S. Geological Survey’s Leetown Science Center and the co-located U.S. Department of Agriculture’s National Center for Cool and Cold Water Aquaculture both depend on large volumes of cold clean ground water to support research operations at their facilities. Currently, ground-water demands are provided by three springs and two standby production wells used to augment supplies during periods of low spring flow. Future expansion of research operations at the Leetown Science Center is dependent on assessing the availability and quality of water to the facilities and in locating prospective sites for additional wells to augment existing water supplies. The hydrogeology of the Leetown area, West Virginia, is a structurally complex karst aquifer. Although the aquifer is a karst system, it is not typical of most highly cavernous karst systems, but is dominated by broad areas of fractured rock drained by a relatively small number of solution conduits. Characterization of the aquifer by use of fluorometric tracer tests, a common approach in most karst terranes, therefore only partly defines the hydrogeologic setting of the area. In order to fully assess the hydrogeology and water quality in the vicinity of Leetown, a multi-disciplinary approach that included both fractured rock and karst research components was needed. The U.S. Geological Survey developed this multi-disciplinary research effort to include geologic, hydrologic, geophysical, geographic, water-quality, and microbiological investigations in order to fully characterize the hydrogeology and water quality of the Leetown area, West Virginia. Detailed geologic and karst mapping provided the framework on which hydrologic investigations were based. Fracture trace and lineament analysis helped locate potential water-bearing fractures and guided installation of monitoring wells. Monitoring wells were drilled for borehole geophysical surveys, water-quality sampling, water-level measurements, and aquifer tests to characterize the quality of water and the hydraulic properties of the aquifer. Surface geophysical surveys provided a 3-dimensional view of bedrock resistivity in order to assess geologic and lithologic controls on ground-water flow. Borehole geophysical surveys were conducted in monitoring wells to assess the storage and movement of water in subsurface fractures. Numerous single-well, multi-well, and straddle packer aquifer tests and step-drawdown tests were conducted to define the hydraulic properties of the aquifer and to assess the role of bedrock fractures and solution conduits in the flow of ground water. Water samples collected from wells and springs were analyzed to assess the current quality of ground water and provide a baseline for future assessment. Microbiological sampling of wells for indicator bacteria and human and animal DNA provided an analysis of agricultural and suburban development impacts on ground-water quality. Light detection and ranging (LiDAR) data were analyzed to develop digital elevation models (DEMs) for assessing sinkhole distribution, to provide elevation data for development of a ground-water flow model, and to assess the distribution of major fractures and faults in the Leetown area. The flow of ground water in the study area is controlled by lithology and geologic structure. Bedrock, especially low permeability units such as the shale Martinsburg Formation and the Conococheague Limestone, act as barriers to water flowing down gradient and across bedding. This retardation of cross-strike flow is especially pronounced in the Leetown area, where bedding typically dips at steep angles. Highly permeable fault and fracture zones that disrupt the rocks in cross-strike directions provide avenues through which ground water can flow laterally across or through strata of low primary permeability. Significant strike parallel thrust faults and cross-strike faults typically coincide with larger solution conduits and act as drains for the more pervasive network of interconnected diffuse fractures. Results of borehole geophysical surveys indicate that although numerous fractures may intersect a borehole, only one or two of the fractures typically transmit most of the water to a well. The diffuse-flow dominated network of fractures that provides the majority of storage occupies only a small proportion of the total aquifer volume but constitutes the majority of porosity within the aquifer. Solution conduits, while occupying a relatively small volume of the overall aquifer, are especially important because they serve as primary drains for the ground-water flow system. Surface resistivity maps and cross-sectionsshow anomalous areas of low resistivities coincident with the prevailing geologic strike at N. 20º E., with major cross-strike faults, and with major springs in the region. Transmissivity derived from straddle packer tests was highly variable, and ranged over three orders of magnitude (1.8 x 10 -6 to 5.9 x 10 -3 ft 2 /d) in diffuse-flow fractures. A similar large variability in transmissivity was documented by single- and multi-well aquifer tests conducted in conduit-flow dominated portions of the aquifer (2.0 x 10 3 to 1.4 x 10 4 ft 2 /d) in lowland areas immediately adjacent to the Leetown Science Center. A stream-gaging station installed on Hopewell Run near the point where the stream exits the Leetown watershed indicates average daily streamflow for the Hopewell Run of approximately 11.2 ft 3 /s, and ranged from a minimum of 1.80 ft 3 /s on September 28, 2005, to a maximum of 73.0 ft 3 /s on December 11, 2003. Base-flow (ground-water) discharge surveys identified numerous small seeps adjacent to streams in the area. Hydrographs of the stage of Balch Spring show rapid response to individual storms. Strong correlation of the flow of Hopewell Run and Balch Spring indicates the nearby losing stream reach is partly responsible for higher fluctuations in the stage of Balch Spring. A water budget for the study period (2003-2005), based on measured precipitation and hydrograph analyses, is expressed as Precipitation (38.60 in/yr) = Surface Runoff (1.36 in/yr) + Ground-Water Discharge (17.73 in/yr) + Evapotranspiration (24.23 in/yr) – Change in storage (4.72 in/yr). Flow of ground water through the epikarst, a shallow zone of intensely weathered rock and regolith, can be rapid (on the order of days or weeks) as flow is concentrated in solution conduits. Flow within the intermediate and deeper zones is typically much slower. Eight dye-tracer tests conducted in the Leetown area found ground-water flow patterns to be divergent, with velocities ranging from about 12.5 to 610 ft/day and a median velocity of 50 ft/day. Estimates of ground-water age in carbonate rocks in the region are on the order of 15 years in the shallower portions of the aquifer to 50 years or older for deeper portions of the aquifer. Shallow springs can have a significant component of fairly young water (< 5 years in age). Ground-water samples collected from 16 sites (12 wells and 4 springs) in the Leetown area were analyzed for more than 340 constituents. Only turbidity, indicator bacteria, and radon were typically present in concentrations exceeding U.S. Environmental Protection Agency (USEPA) drinking-water or aquatic life standards.

West Virginia↗

USGS2013

Crystallization of oxidized, moderately hydrous arc basalt at mid- to lower-crustal pressures: Implications for andesite genesis

This study focuses on the production of convergent margin calc-alkaline andesites by crystallization–differentiation of basaltic magmas in the lower to middle crust. Previous experimental studies show that dry, reduced, subalkaline basalts differentiate to tholeiitic (high Fe/Mg) daughter liquids, but the influences of H 2 O and oxidation on differentiation are less well established. Accordingly, we performed crystallization experiments at controlled oxidized fO 2 (Re–ReO 2 ≈ ΔNi–NiO + 2) on a relatively magnesian basalt (8.7 wt% MgO) typical of mafic magmas erupted in the Cascades near Mount Rainier, Washington. The basalt was synthesized with 2 wt% H2O and run at 900, 700, and 400 MPa and 1,200 to 950 °C. A broadly clinopyroxenitic crystallization interval dominates near the liquidus at 900 and 700 MPa, consisting of augite + olivine + orthopyroxene + Cr-spinel (in decreasing abundance). With decreasing temperature, plagioclase crystallizes, Fe–Ti-oxide replaces spinel, olivine dissolves, and finally amphibole appears, producing gabbroic and then amphibole gabbroic crystallization stages. Enhanced plagioclase stability at lower pressure narrows the clinopyroxenitic interval and brings the gabbroic interval toward the liquidus. Liquids at 900 MPa track along Miyashiro’s (Am J Sci 274(4):321–355, 1974) tholeiitic versus calc-alkaline boundary, whereas those at 700 and 400 MPa become calc-alkaline at silica contents ≥56 wt%. This difference is chiefly due to higher temperature appearance of magnetite (versus spinel) at lower pressures. Although the evolved liquids are similar in many respects to common calc-alkaline andesites, the 900 and 700 MPa liquids differ in having low CaO concentrations due to early and abundant crystallization of augite, with the result that those liquids become peraluminous (ASI: molar Al/(Na + K + 2Ca) > 1) at ≥61 wt% SiO 2 , similar to liquids reported in other studies of the high-pressure crystallization of hydrous basalts (Müntener and Ulmer in Geophys Res Lett 33(21):L21308, 2006). The lower-pressure liquids (400 MPa) have this same trait, but to a lesser extent due to more abundant near-liquidus plagioclase crystallization. A compilation of >6,500 analyses of igneous rocks from the Cascades and the Sierra Nevada batholith, representative of convergent margin (arc) magmas, shows that ASI increases continuously and linearly with SiO2 from basalts to rhyolites or granites and that arc magmas are not commonly peraluminous until SiO 2 exceeds 69 wt%. These relations are consistent with plagioclase accompanying mafic silicates over nearly all the range of crystallization (or remelting). The scarcity of natural peraluminous andesites shows that progressive crystallization–differentiation of primitive basalts in the deep crust, producing early clinopyroxenitic cumulates and evolved liquids, does not dominate the creation of intermediate arc magmas or of the continental crust. Instead, mid- to upper-crustal differentiation and/or open-system processes are critical to the production of intermediate arc magmas. Primary among the open-system processes may be extraction of highly evolved (granitic, rhyolitic) liquids at advanced degrees of basalt solidification (or incipient partial melting of predecessor gabbroic intrusions) and mixing of such liquids into replenishing basalts. Furthermore, if the andesitic-composition continents derived from basaltic sources, the arc ASI–SiO 2 relation shows that the mafic component returned to the mantle was gabbroic in composition, not pyroxenitic.

Contributions to Mineralogy and Petrology↗

USGS1975

Abundances of uranium, thorium, and potassium for some Australian crystalline rocks

This report contains a tabulation of the basic radioelement and radiogenic heat data obtained during an Australian National University (ANU) - United States Geological Survey (USGS) heat-flow project, directed jointly by J. C. Jaeger (ANU) and J. H. Sass (USGS). Most samples were collected during the periods June through September, 1971 and 1972. The measurements were made subsequently by two of us (C. M. Bunker and C. A. Bush) using the gamma-ray spec trometric techniques described by Bunker and Bush (1966, 1967). Interpreting the spectra for quantitative analyses of the radioelements was accomplished with an iterative leastsquares computer program modified from one by Schonfeld (1966). Uranium content determined by gamma-ray spectrometry is based on a measurement of the daughter products of 226 Ra. Equilibrium in the uranium-decay series was assumed for these analyses . Throughout the report, when U content is stated, radium-equivalent uranium is implied. The coefficient of variation for the accuracy of the radioelement data, when compared to ana lyses by isotope dilution and flame photometry is about 3 percent for radium-equivalent uranium and thorium and about 1 percent for potassium. These percentages are in addition to minimum standard deviations of about 0.05 ppm for U and Th, and about 0.03 percent for K.

Open-File Report↗

USGS1999

Petrology and geochemistry of late-stage intrusions of the A-type, mid-Proterozoic Pikes Peak batholith (Central Colorado, USA): Implications for petrogenetic models

The ~1.08 Ga anorogenic, A-type Pikes Peak batholith (Front Range, central Colorado) is dominated by coarse-grained, biotite ?? amphibole syenogranites and minor monzogranites, collectively referred to as Pikes Peak granite (PPG). The batholith is also host to numerous small, late-stage plutons that have been subdivided into two groups (e.g. Wobus, 1976. Studies in Colorado Field Geology, Colorado School of Mines Professional Contributions, Colorado): (1) a sodic series (SiO2= ~44-78 wt%; K/Na=0.32-1.36) composed of gabbro, diabase, syenite/quartz syenite and fayalite and sodic amphibole granite; and (2) a potassic series (SiO2= ~ 70-77 wt%; K/Na=0.95-2.05), composed of biotite granite and minor quartz monzonite. Differences in major and trace element and Nd isotopic characteristics for the two series indicate different petrogenetic histories. Potassic granites of the late-stage intrusions appear to represent crustal anatectic melts derived from tonalite sources, based on comparison of their major element compositions with experimental melt products. In addition, Nd isotopic characteristics of the potassic granites [??(Nd)(1.08 Ga) = -0.2 to -2.7] overlap with those for tonalites/granodiorites [ca 1.7 Ga Boulder Creek intrusions; ??(Nd)(1.08 Ga) = -2.4 to -3.6] exposed in the region. Some of the partial melts evolved by fractionation dominated by feldspar. The late-stage potassic granites share geochemical characteristics with most of the PPG, which is also interpreted to have an anatectic origin involving tonalitic crust. The origin of monzogranites associated with the PPG remains unclear, but mixing between granitic and mafic or intermediate magmas is a possibility. Syenites and granites of the sodic series cannot be explained as crustal melts, but are interpreted as fractionation products of mantle-derived mafic magmas with minor crustal input. High temperature and low oxygen fugacity estimates (e.g. Frost et al., 1988. American Mineralogist 73, 727-740) support a basalt fractionation origin, as do ??(Nd) values for sodic granitoids [??(Nd)(1.08 Ga) = +2.2 to -0.7], which are higher than ??(Nd) values for Colorado crust at 1.08 Ga (ca -1.0 to -4.0). Enrichments in incompatible elements (e.g. rare earth elements, Rb, Y) and depletions in compatible elements (e.g. Cr, Sr, Ba) in the sodic granitoids compared to coeval mafic rocks are also consistent with fractionation. Accessory mineral fractionation, release of fluorine-rich volatiles and/or removal of pegmatitic fluids could have modified abundances of Ce, Nb, Zr and Y in some sodic granitoid magmas. Gabbros and mafic dikes associated with the sodic granitoids have ??(Nd)(1.08 Ga) of -3.0 to +3.5, which are lower than depleted mantle at 1.08 Ga, and their trace element characteristics suggest derivation from mantle sources that were previously affected by subduction-related processes. However, it is difficult to characterize the mantle component in these magmas, because assimilation of crust during magma ascent could also result in their observed geochemical features. The Pikes Peak batholith is composed of at least two petrogenetically different granite types, both of which exhibit geochemical characteristics typical of A-type granites. Models proposed for the petrogenesis of the granitoids imply the existence of mafic rocks at depth and addition of juvenile material to the crust in central Colorado at ~ 1.1 Ga.

Precambrian Research↗

USGS2014

Seismological and geodetic constraints on the 2011 M w 5.3 Trinidad, Colorado earthquake and induced deformation in the Raton Basin

The Raton Basin of southern Colorado and northern New Mexico is an actively produced hydrocarbon basin that has experienced increased seismicity since 2001, including the August 2011 M w 5.3 Trinidad normal faulting event. Following the 2011 earthquake, regional seismic observations were used to relocate 21 events, including the 2011 main shock, two foreshocks, and 13 aftershocks. Additionally, interferometric synthetic aperture radar (InSAR) observations of both the 2011 event and preevent basin deformation place constraint on the spatial kinematics of the 2011 event and localized basin subsidence due to ground water or gas withdrawal. We find that the 2011 earthquake ruptured an 8–10 km long segment of a normal fault at depths of 1.5–6.0 km within the crystalline Precambrian basement underlying the Raton Basin sedimentary rocks. The earthquake also nucleated within the crystalline basement in the vicinity of an active wastewater disposal site. The ensuing aftershock sequence demonstrated statistical properties expected for intraplate earthquakes, though the length of the 2011 earthquake is unexpectedly long for an M w 5.3 event, suggesting that wastewater disposal may have triggered a low stress drop, otherwise natural earthquake. Additionally, preevent and postevent seismicity in the Raton Basin spatially correlates to regions of subsidence observed in InSAR time series analysis. While these observations cannot discern a causal link between hydrocarbon production and seismicity, they constrain spatial relationships between active basin deformation and geological and anthropogenic features. Furthermore, the InSAR observations highlight the utility of space-based geodetic observations for monitoring and assessing anthropogenically induced and triggered deformation.

Journal of Geophysical Research B: Solid Earth↗

USGS2021

Paleozoic and Mesozoic tectonic events west of the Waterbury Dome: Results of new mapping in the western Connecticut Highlands

This field trip highlights the results of recent U.S. Geological Survey (USGS) bedrock geologic mapping in four 7.5 min quadrangles in the western Connecticut highlands near Southbury, Connecticut, USA. The rocks are broadly within what Rodgers (1985) called the Hartland and Gneiss Dome belts of the Connecticut Valley Synclinorium ( Rodgers, 1985 ; Fig. 1 ), the latter of which is now known as the Connecticut Valley–Gaspe Trough (Hibbard et al., 2006). The mapping occurred over two intervals: 2003–2005 and 2016–present. In the first, the goal was a detailed map of the early Mesozoic Pomperaug basin, which overlaps the four quadrangles. Portions of the basin had been separately mapped during the statewide 7.5 min quadrangle mapping campaign spanning the 1950s–1970s, resulting in an inaccurate depiction of the basin on the 1985 state geologic map ( Rodgers, 1985 ). A new map of the basin was proposed in part to benefit an ongoing project by the USGS Connecticut Water Science Center to determine the contributions of natural and artificial contaminants to a public water-supply well in Woodbury, Connecticut, under the National Water-Quality Assessment (NAWQA) Program ( Starn and Brown, 2007) . The NAWQA project was partially funded by the Pomperaug River Watershed Coalition, which also provided logistical support to the geologic mapping project. Mapping of the basin was also a high priority for the Connecticut State Geologist at the time (Ralph Lewis, 2002, pers. comm.). The mapping resulted in an NEIGC (New England Intercollegiate Geologic Conference) field guide ( Burton et al., 2005) and a 1:12,000-scale USGS open-file map ( Burton, 2006) and was funded by the USGS National Cooperative Geologic Mapping Program (NCGMP). The second phase of the mapping began in 2016 after the discovery of elevated levels of uranium and arsenic in domestic water wells in the igneous and metamorphic rocks that surround the sedimentary and volcanic rocks of the Pomperaug basin ( Flanagan and Brown, 2017) . Structural measurements in the surrounding crystalline rocks were made during Pomperaug basin mapping to better understand the tectonic setting, but a revision of the crystalline map units on Rodgers’ 1985 geologic map was not attempted. Nonetheless, discrepancies were noted between the new mapping and the 1985 map, particularly within the two northern quadrangles of Woodbury and Roxbury, which were originally mapped by Gates (1954) and Gates (1959) , respectively. Based on these discrepancies, a new NCGMP project was proposed to remap the Woodbury and Roxbury 7.5 min quadrangles, commencing in the fall of 2016. The expected USGS product will be a two-quadrangle, 1:24,000-scale Scientific Investigations Map (SIM). This field guide is not meant as a comprehensive review of all of the geologic research done in this area of Connecticut; rather, it looks at previous bedrock geologic mapping from the perspective of new and recent mapping in the four-quadrangle area and discusses the structural, stratigraphic, and nomenclatural revisions necessary for the next revision of the state geologic map.

Connecticut↗

USGS1994

Geologic map of the Venezuela part of the Puerto Ayacucho 2 degrees x 3 degrees Quadrangle, Amazonas Federal Territory, Venezuela

This map is one of a series of 1:500,000-scale maps that, along with several other products, stems from a cooperative agreement between the U.S. Geological Survey (USGS) and the Corporacion Venezolana de Guayana, Tecnica Minera, C.A. (TECMIN), a Venezuelan Government-owned mining and mineral exploration company. The agreement covered cooperative work carried out in the Precambrian Shield of southern Venezuela during 1987-1991 and included a geologic and mineral resource inventory, technology transfer, and scientific training (Wynn and others, in press). The Precambrian Guayana Shield (Escudo de Guyana, not to be confused with the neighboring country of Guyana) includes some of the oldest known rocks in the world (Mendoza, 1977) and also covers parts of neighboring Guyana, Surinam, French Guiana, Columbia, and Brazil. In Venezuela, it underlies most of Bolivar state and all of the Amazonas Federal Territory (see index map).

Puerto Ayacucho↗

USGS2023

Eruptive history within the vicinity of Al Madīnah in northern Harrat Rahat, Kingdom of Saudi Arabia

The northernmost part of the Harrat Rahat volcanic field contains early Pleistocene to Holocene mafic eruptive products within the vicinity of the city of Al Madīnah, Kingdom of Saudi Arabia. A detailed geologic investigation into the eruptive history of a 570 square kilometer (km 2 ) area covering Al Madīnah and the surrounding area has yielded 33 mapped Quaternary volcanic units consisting of lava flows, scoria cones, and shield volcanoes. These eruptive products consist of continental, intraplate alkalic and minor transitional basalts, hawaiites, and a single mugearite that were emplaced from at least 1,014±14 thousand years ago (ka) to a single Holocene eruption in 1256 C.E. Lava flows are generally 10 to 15 kilometers (km) long (but can reach 23 km long), 1 to 3 km wide, and at least 10 meters thick. Most of the mapped units erupted episodically between 400 and 340 ka and 180 and 100 ka. Despite small individual volumes (less than 1 cubic kilometers dense rock equivalent), each unit represents eruption of a distinct magma batch that was strongly influenced by clinopyroxene, olivine, and plagioclase fractionation. Some of these units are interpreted to have undergone magma mixing pre- and (or) syneruptively. Integrating eruption ages, geochemistry, and paleomagnetic data yields evidence that some eruptions were temporally and (or) spatially clustered. Aligned scoria cones and elongate vent edifices were constructed atop fissure vent systems that reflect the local stress field, which controls dike ascent through the middle and upper crust.

Professional Paper↗

USGS1956

Summary of reconnaissance for radioactive deposits in Alaska, 1945-1954, and an appraisal of Alaskan uranium possibilities

In the period 1945-1954 over 100 investigations for radioactive source materials were made in Alaska. The nature of these investigations ranged from field examinations of individual prospects or the laboratory analysis of significantly radioactive samples submitted by prospectors to reconnaissance studies of large districts. In this period no deposits of uranium or thorium that would warrant commercial exploitation were discovered. The investigations, however, disclosed that radioactive materials occur in widely scattered areas of Alaska and in widely diverse environments. Many igneous rocks throughout Alaska are weakly radioactive because of uranium- and thorium-bearing accessory minerals, such as allanite, apatite, monazite, sphene, xenotime, and zircon; more rarely the radioactivity of these rocks is due to thorianite or thorite and their uranoan varieties. The felsic rocks, for example, granites and syenites, are generally more radioactive than the mafic igneous rocks. Pegmatites, locally, have also proved to be radioactive, but they have little commercial significance. No primary uranium oxide minerals have been found yet in Alaskan vein deposits, except, perhaps, for a mineral tentatively identified as pitchblende in the Hyder district of southeastern Alaska. However, certain occurrences of secondary uranium minerals, chiefly those of the uranite group, on the Seward Peninsula, in the Russian Mountains, and in the vicinity of Kodiak suggest that pitchblende-type ores may occur at depth beneath zones of alteration. Thorite-bearing veins have been discovered on Prince of Wales Island in southeastern Alaska. Although no deposits or carnotite-type minerals have been found in Alaska, several samples containing such minerals have been submitted by Alaskan prospectors. Efforts to locate the deposits from which these minerals were obtained have been unsuccessful, but review of available geologic data suggests that several Alaskan areas are potentially favorable for carnotite-type deposits. The chief of these areas is the Alaska Peninsula-Cook Inlet area which encompasses most of the reported occurrences of the prospectors' carnotite-type samples. Alaska is also potentially favorable for the occurrence of large bodies of the very low-grade uraniferous sedimentary rocks, such as phosphorites and black shales. This type of deposit, however, has not received much study because of the emphasis on the search for bonanza-type high-grade ores. Uraniferous phosphorites similar to those of Idaho, Montana, and Wyoming occur in northern Alaska on the north flank of the Brooks Range; black shales comparable to the uraniferous shales of the Chattanooga formation of southeastern United States have been noted along the Yukon River near the international boundary. Placer deposits in Alaska have some small potential for the production of the radioactive elements as byproducts of gold- and tin-placer mining. the placer area believed to have the relatively greatest potential in Alaska lies in the Kahiltna River valley where concentrates are known to contain such commercial minerals as ilmenite, cassiterite, platinum, and gold in addition to uranothorianite and monazite. The possibilities of the natural fluids--water and petroleum--have not yet been tested in Alaska to any great extent. Studies of fluids are in progress to determine whether they may be used to discover and define areas potentially favorable for the occurrence of uraniferous lodes.

Alaska↗

USGS2015

California State Waters Map Series — Offshore of Salt Point, California

In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP), designed to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats, and geology within the 3-nautical-mile limit of California’s State Waters. The CSMP approach is to create highly detailed seafloor maps through collection, integration, interpretation, and visualization of swath sonar data, acoustic backscatter, seafloor video, seafloor photography, high-resolution seismic-reflection profiles, and bottom-sediment sampling data. The map products display seafloor morphology and character, identify potential marine benthic habitats, and illustrate both the surficial seafloor geology and shallow (to about 100 m) subsurface geology. The Offshore of Salt Point map area is located in northern California, about 110 km north of San Francisco and 50 km south of Point Arena. The map area includes three California Marine Protected Areas: the southern portion of the Stewarts Point State Marine Reserve, the Salt Point State Marine Conservation Area, and the Gerstle Cove State Marine Reserve. The coast and shoreline are rugged and scenic, characterized by rocky promontories, steep bluffs capped by bare to forested marine terraces, kelp-rich coves, and nearshore rocks and pinnacles. The largely undeveloped onshore part of the map area is used primarily for grazing and recreation. U.S. Highway 1 extends along the coast through the map area, passing through Salt Point State Park, Kruse Rhododendron State Natural Reserve, and Stillwater Cove Regional Park. Sandy beaches are uncommon, present only in relatively protected coves. The seafloor in the map area extends from the shoreline to water depths of about 90 to 100 m. The nearshore to inner shelf area (to water depths of about 50 to 60 m) typically dips seaward about 1.0° to 1.5° and is underlain by bedrock and sand-sized to coarser grained sediment. The midshelf, underlain predominantly by muddy sediments, slopes more gently (less than 0.5°). Surficial and shallow sediments were deposited in the last about 21,000 years during the approximately 125-m sea-level rise that followed the last major lowstand associated with the Last Glacial Maximum, at which time the entire Offshore of Salt Point map area was emergent and the shoreline was about 20 km west of the present-day shoreline. Tectonic influences that impact the shelf morphology and geology in the map area are related to local faulting, folding, uplift, and subsidence. The onshore part of the map area is cut by the northwest-striking San Andreas Fault—the right-lateral transform boundary between the North American and Pacific tectonic plates with an estimated slip rate of about 17 to 25 mm/yr in this area. The region between Fort Ross and Point Arena, west of the San Andreas Fault, is the known as the “Gualala Block” on the basis of its distinctive geology. The Gualala Block consists of a thick, discontinuous Upper Cretaceous to Miocene stratigraphic section, however, only the submarine fan deposits of the Paleocene and Eocene German Rancho Formation are exposed along the coast in the Offshore of Salt Point map area. The German Rancho Formation also forms all of the rugged seafloor bedrock outcrops in the map area. The western boundary of the Gualala Block lies 3 to 5 km offshore, perhaps at the shore-parallel Gualala Fault. High-resolution seismic-reflection data reveal shallow folding and faulting in inferred upper Pleistocene strata along the Gualala Fault trend, suggesting this structure is now or has been recently active. The last ground rupture in the map area occurred during the devastating great 1906 California earthquake (M7.8, 4/18/1906), thought to have nucleated on the San Andreas Fault about 100 kilometers to the south offshore of San Francisco. Circulation over the continental shelf in the map area is dominated by the southward-flowing California Current, the eastern limb of the North Pacific Gyre. Associated upwelling brings cool, nutrient-rich waters to the surface, resulting in high biological productivity. The current flow generally is southeastward during the spring and summer; however, during the fall and winter, the otherwise persistent northwest winds are sometimes weak or absent, causing the California Current to move farther offshore and the Davidson Current, a weaker, northward-flowing countercurrent, to become active. Throughout the year, this part of the central California coast is exposed to four wave climate regimes: the north Pacific swell, the southern swell, northwest wind waves, and local wind waves. The north Pacific swell dominates in winter months, with wave heights at offshore buoys ranging from 2 to 10 m and wave periods ranging from 10 to 25 s. During summer months, the largest waves come from the southern swell, generated by storms in the south Pacific and offshore Central America. Characteristically, these swells have smaller wave heights (0.3 to 3 m) and similarly long periods (range 10 to 25 s). Northwest wind waves affect the coast throughout the year, while local wind waves are most common from October to April. These two wind-wave regimes typically have wave heights of 1 to 4 m and short periods (3 to 10 s). Potential marine benthic habitats in the Offshore of Salt Point map area include unconsolidated continental shelf sediments, mixed continental shelf substrate, and hard continental shelf substrate. Rocky-shelf outcrops and rubble are considered to be promising potential habitats for rockfish and lingcod, both of which are recreationally and commercially important species.

California↗