Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Northwest Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55Linked to original sources
USGS1997

Revised preliminary geologic map of the Rifle Quadrangle, Garfield County, Colorado

The Rifle quadrangle extends from the Grand Hogback monocline into the southeastern part of the Piceance basin. In the northeastern part of the map area, the Wasatch Formation is nearly vertical, and over a distance of about 1 km, the dip decreases sharply from about 70-85o to about 15-30o toward the southwest. No evidence of a fault in this zone of sharp change in dip is observed but exposures in the Shire Member of the Wasatch Formation are poor, and few marker horizons that might demonstrate offset are distinct. In the central part of the map area, the Shire Member is essentially flat lying. In the south and southwest part of the map area, the dominant dip is slightly to the north, forming an open syncline that plunges gently to the northwest. Evidence for this fold also exists in the subsurface from drill-hole data. According to Tweto (1975), folding of the early Eocene to Paleocene Wasatch Formation along the Grand Hogback reqired an early Eocene age for the last phase of Laramide compression. We find the attitude of the Wasatch Formation to be nearly horizontal, essentially parallel to the overlying Anvil Points Member of the Eocene Green River Formation; therefore, we have no information that either confirms or disputes that early Eocene was the time of the last Laramide event. Near Rifle Gap in the northeast part of the map area, the Mesaverde Group locally dips about 10o less steeply than the overlying Wasatch Formation, indicating that not only had the formation of the Hogback monocline not begun by the time the Wasatch was deposited at this locality, but the underlying Mesaverde Group was locally tilted slightly toward the present White River uplift. Also the basal part of the Atwell Gulch Member of the Wasatch Formation consists of fine-grained mudstones and siltstones containing sparse sandstone and rare conglomerates, indicating that the source of sediment was not from erosion of the adjacent Upper Cretaceous Mesaverde Group. The most likely source of andesitic conglomerate clasts abundant in the upper part of the Atwell Gulch Member was Late Cretaceous-Early Tertiary andesitic igneous rocks, remnants of which are present southeast of the Piceance Basin (Tweto, 1979). Thinning of the Atwell Gulch and Molina Members to the northwest also suggests a southeastern source of sediments, ruling out a northeastern source related to earlier deformation of the Upper Cretaceous Mesa Verde Group.

Colorado↗
USGS2006

Preliminary Geologic Map of Mount Pagan Volcano, Pagan Island, Commonwealth of the Northern Mariana Islands

Pagan Island is the subaerial portion of two adjoining Quaternary stratovolcanoes near the middle of the active Mariana Arc, [FAT1]north of Saipan. Pagan and the other volcanic islands that constitute part of the Arc form the northern half of the East Mariana Ridge[FAT2], which extends about 2-4 km above the ocean floor. The > 6-km-deep Mariana Trench adjoins the East Mariana Ridge on the east, and the Mariana Trough, partly filled with young lava flows and volcaniclastic sediment, lies on the west of the Northern Mariana Islands (East Mariana Ridge. The submarine West Mariana Ridge, Tertiary in age, bounds the western side of the Mariana Trough. The Mariana Trench and Northern Mariana Islands (East Mariana Ridge) overlie an active subduction zone where the Pacific Plate, moving northwest at about 10.3 cm/year, is passing beneath the Philippine Plate, moving west-northwest at 6.8 cm/year. Beneath the Northern Mariana Islands, earthquake hypocenters at depths of 50-250 km identify the location of the west-dipping subduction zone, which farther west becomes nearly vertical and extends to 700 km depth. During the past century, more than 40 earthquakes of magnitude 6.5-8.1 have shaken the Mariana Trench. The Mariana Islands form two sub-parallel, concentric, concave-west arcs. The southern islands comprise the outer arc and extend north from Guam to Farallon de Medinilla. They consist of Eocene to Miocene volcanic rocks and uplifted Tertiary and Quaternary limestone. The nine northern islands extend from Anatahan to Farallon de Pajaros and form part of the inner arc. The active inner arc extends south from Anatahan, where volcanoes, some of which are active, form seamounts west of the older outer arc. Other volcanic seamounts of the active arc surmount the East Mariana Ridge in the vicinity of Anatahan and Sarigan and north and south of Farallon de Pajaros. Six volcanoes (Farallon de Pajaros, Asuncion, Agrigan, Mount Pagan, Guguan, and Anatahan) in the northern islands have erupted during the past century, and Ruby Seamount erupted in 1996.

Open-File Report↗
USGS1973

Submarine chert-argillite slide-breccia of Paleozoic age in the southern Klamath Mountains, California

A unique chert-argillite breccia—a breccia with an argillite matrix, in which nearly all the fragments are chert—underlies an area of at least 60 sq mi in the southern Klamath Mountains of California. Rocks of this composition have not been reported previously, in the Klamath Mountains or elsewhere, but in northwestern Trinity County they make up a large part of the western Paleozoic and Triassic belt. The remainder of the belt consists of northerly trending sinuous zones of two other principal lithologies: radiolarian chert, rhythmically interbedded with slate or phyllite, crops out in three zones in the eastern, central, and western parts of the area; and massive metabasalt and metadiabase intruded by gabbro and serpentinite occur in a zone about 3 mi wide in the eastern part of the area. Although the predominance of chert fragments makes the chert-argillite breccia apparently unique, rocks that are generally similar, consisting of angular to subangular clasts in a pelitic matrix, have been studied in many localities. Field relations and petrographic features of the chert-argillite breccia—specifically the angularity of clasts, absence of a sandy matrix, preservation of Radiolaria in both chert clasts and pelitic matrix, presence of contorted flow laminae in the matrix, large size of some of the exotic blocks, close association with chert, pillow lava, and limestone, absence of stretching or slickensiding of clasts, and overall dimensions of the unit measurable in miles—variously preclude origin of the rock as a normal sedimentary conglomerate, a tectonic breccia, a tillite, or a subaerial mudflow, but include features common to numerous submarine-slide deposits. We interpret the chert-argillite breccia as the result of uplift and subsequent sliding of a thick deposit of inter-layered chert and pelitic ooze. Brittle fracturing of the chert and mobilization of water-saturated ooze produced the observed features. Fossiliferous limestone blocks within the slide-breccia indicate that it is no older than Silurian or Devonian, and it predates Jurassic metamorphism and plutonism. The relation of the breccia to a major northwest-trending fault zone, and to serpentinite within this zone, suggests that the formation of the breccia was generally synchronous with the faulting and ultramafic intrusion. Rocks of the central metamorphic belt, east of the mapped area, were metamorphosed during a Devonian orogeny, and we suggest that the submarine slide-breccia was formed as a frontal effect of the same orogeny.

California↗
USGS1980

Geologic map of the Argyre quadrangle of Mars

The geology of the Argyre quadrangle of Mars is dominated by the conspicuous Argyre basin, defined by a rim of rugged mountain blocks that surround a nearly circular expanse of plains 800 km across. Of the large (greater than 500 km in diameter) basins identified on Mars, Argyre is the best preserved and possibly youngest. Basins appear to be traps for eolian debris and evidently are source areas for some of the dust storms that periodically envelop the planet. The quadrangle lies within the densely cratered province that characterizes the southern hemisphere, contrasting with sparsely cratered plains generally confined to the northern hemisphere. Northwest of Argyre an outlier of sparsely cratered, ridged plains extends into the quadrangle from the Coprates region. Northeast of the basin are the cratered uplands, parts of which are presumed to represent remnants of the earliest martian crust (Wilhelms, 1974). South of the quadrangle the cratered plateau is replaced by the pitted, etched, layered, and mantled terrains that characterize the south polar region (Sharp, 1973a; Condit and Soderblom, 1978). Constructional volcanic landforms were not recognized within the map area.

IMAP↗
USGS2010

Geophysical investigations at Hidden Dam, Raymond, California — Flow simulations

Numerical flow modeling and analysis of observation-well data at Hidden Dam are carried out to supplement recent geophysical field investigations at the site (Minsley and others, 2010). This work also is complementary to earlier seepage-related studies at Hidden Dam documented by Cedergren (1980a, b). Known seepage areas on the northwest right abutment area of the downstream side of the dam was documented by Cedergren (1980a, b). Subsequent to the 1980 seepage study, a drainage blanket with a sub-drain system was installed to mitigate downstream seepage. Flow net analysis provided by Cedergren (1980a, b) suggests that the primary seepage mechanism involves flow through the dam foundation due to normal reservoir pool elevations, which results in upflow that intersects the ground surface in several areas on the downstream side of the dam. In addition to the reservoir pool elevations and downstream surface topography, flow is also controlled by the existing foundation geology as well as the presence or absence of a horizontal drain in the downstream portion of the dam. The current modeling study is aimed at quantifying how variability in dam and foundation hydrologic properties influences seepage as a function of reservoir stage. Flow modeling is implemented using the COMSOL Multiphysics software package, which solves the partially saturated flow equations in a two-dimensional (2D) cross-section of Hidden Dam that also incorporates true downstream topography. Use of the COMSOL software package provides a more quantitative approach than the flow net analysis by Cedergren (1980a, b), and allows for rapid evaluation of the influence of various parameters such as reservoir level, dam structure and geometry, and hydrogeologic properties of the dam and foundation materials. Historical observation-well data are used to help validate the flow simulations by comparing observed and predicted water levels for a range of reservoir elevations. The flow models are guided by, and discussed in the context of, the geophysical work (Minsley and others, 2010) where appropriate.

California↗
USGS2011

Review of samples of water, sediment, tailings, and biota at the Little Bonanza mercury mine, San Luis Obispo County, California

Background and Objectives The Little Bonanza mercury (Hg) mine, located in San Luis Obispo County, California, is a relatively small mine with, a historical total Hg production of about 1,000 flasks. The mine workings and tailings are located in the headwaters of the previously unnamed west fork of Las Tablas Creek (WF Las Tablas Creek), which flows into the Nacimiento Reservoir. Wasterock and tailings eroded from the Little Bonanza Hg Mine have contributed Hg-enriched mine wastes to the headwaters of WF Las Tablas Creek. The mine is located on Federal land managed by the U.S. Bureau of Land Management (BLM), which requested that the U.S. Geological Survey (USGS) measure and characterize Hg and other geochemical constituents in tailings, sediment, water, and biota at and downstream from the minesite. This report is in response that request, from the lead agency which is mandated to conduct a Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) - Removal Site Investigation (RSI). The RSI applies to removal of Hg-contaminated mine waste from the Little Bonanza minesite as a means of reducing Hg transport to WF Las Tablas Creek. This report summarizes data obtained from field sampling of mine tailings, wasterock, sediment, water, and biota at the Little Bonanza Mine that was completed on April 6, 2010. Conditions during sampling were dry and no rain had occurred in the watershed for several weeks. Our results permit a preliminary assessment of the mining sources of Hg and associated chemical constituents that could produce elevated levels of monomethyl mercury (MMeHg) in WF Las Tablas Creek and in biota. History and Geology The history of the Little Bonanza Hg mine is summarized here from Yates (1943) and other references as cited. The Little Bonanza Mine, located 20 mi west of Paso Robles, was discovered in 1862. Although production was minor until 1900, from 1900 to 1906, the mine produced about 1,000 flasks of Hg. Intermittent production continued into the 1940s but was relatively limited. Underground workings, now caved and inaccessible, include about 3,000 ft of drifts, crosscuts, and raises on three levels extending 260 ft downward. The workings at the Little Bonanza Mine explore a zone of fault breccia, which trends northwest. The breccia is composed of fragments of sandstone, greenstone, serpentine, and chert in a shale matrix. The serpentine has been hydrothermally altered to silica-carbonate rock, and the Hg deposit is hosted within the zone of alteration. The veins are discontinuous and irregular, but form a steplike pattern along the fault zone. The principal mineralization occurring in the veins is irregular, consisting of disseminated zones of cinnabar. Most of the veins in the mine area contain cinnabar. Sample Sites and Methods Samples were collected to assess the concentrations of Hg and biogeochemically relevant constituents in tailings and wasterock piles at the Little Bonanza Hg mine. Tailings are present adjacent to a three-pipe retort used to process the Hg ore. The tailings occur in the upper 15 cm of the soil adjacent to the retort and slag from the retort is present on the surface. An area of disturbed soil and rock uphill from the retort was likely formed during construction of a dam that provided water for mining activities. Wasterock in these piles was sampled. The largest amount of tailings is exposed to the west of the retort in the bank of WF Las Tablas Creek. Water, sediment, and biota were sampled from WF Las Tablas Creek, which flows through the mine area. Sample-site locations are shown in figures 10 and 11 and listed in table 1. Samples were collected when streamflow was low and no precipitation had occurred.

California↗
USGS2013

Bedrock and surficial geologic map of the Satan Butte and Greasewood 7.5’ quadrangles, Navajo and Apache Counties, northern Arizona

The geologic map of the Satan Butte and Greasewood 7.5’ quadrangles is the result of a cooperative effort of the U.S. Geological Survey (USGS) and the Navajo Nation to provide regional geologic information for management and planning officials. This map provides geologic information useful for range management, plant and animal studies, flood control, water resource investigations, and natural hazards associated with sand-dune mobility. The map provides connectivity to the regional geologic framework of the Grand Canyon area of northern Arizona. The map area encompasses approximately 314 km 2 (123 mi 2 ) within Navajo and Apache Counties of northern Arizona and is bounded by lat 35°37'30" to 35°30' N., long 109°45' to 110° W. The quadrangles lie within the southern Colorado Plateau geologic province and within the northeastern portion of the Hopi Buttes (Tsézhin Bií). Large ephemeral drainages, Pueblo Colorado Wash and Steamboat Wash, originate north of the map area on the Defiance Plateau and Balakai Mesa respectively. Elevations range from 1,930 m (6,330 ft) at the top of Satan Butte to about 1,787 m (5,860 ft) at Pueblo Colorado Wash where it exits the southwest corner of the Greasewood quadrangle. The only settlement within the map area is Greasewood, Arizona, on the north side of Pueblo Colorado Wash. Navajo Highway 15 crosses both quadrangles and joins State Highway 264 northwest of Ganado. Unimproved dirt roads provide access to remote parts of the Navajo Reservation.

Arizona↗
USGS1999

Ground-water levels and flow directions in the glacial sediments and the Lockport Dolomite in southeastern Darke and northeastern Preble counties, Ohio, July 1998

During the summer of 1997, the U.S. Environmental Protection Agency (USEPA) began an emergency removal action at the Lewisburg Drum Site in northern Preble County, Ohio. The site is about 3 miles west-northwest of the village of Lewisburg. The USEPA removed about 1,200 drums of waste ink from the site, as well as 2,500 cubic yards of contaminated soil and 100,000 gallons of ground water. Because of the potential for off-site migration of ground-water contamination, USEPA sampled residential wells in the area; results from the samples collected by USEPA indicated that the quality of water in some privately owned wells may have been affected by contaminants from the site. However, the directions of ground-water flow in the area were not known. In 1998, the U.S. Geological Survey (USGS), in cooperation with the USEPA, measure water levels in the vicinity of the site. This map will aid in the interpretation of the water-quality data collected by USEPA.

Ohio↗
USGS1987

Construction, geologic, and hydrologic data for observation wells in the Reelfoot Lake area, Tennessee and Kentucky

Twenty-three observation wells were installed at 12 sites in the Reelfoot Lake area of Kentucky and Tennessee during July 1986. The wells were installed to supplement an existing water level network and to provide additional data on the hydraulic characteristics and vertical hydraulic gradients in the alluvial aquifer near Reelfoot Lake. Well yields ranged from less than 20 gallons per minute to about 140 gallons per minute. The specific capacities of the wells ranged from less than 1 to 17.1 gallons per minute per foot of drawdown. Three stratigraphic sequences were encountered during drilling. Clay and silty clay was about 40 feet deep near the southwest corner of Reelfoot Lake. Predominantly medium- to coarse grained sand occurred below about 15 feet of silt and clay near the west and northwest sides of Reelfoot Lake. Along the western limit of the study area, near Lake No. 9 and the Mississippi River, about 20 to 30 feet of silt and silty sand occurred below land surface.

Kentucky, Tennessee↗
USGS1964

Geology and ground-water resources of Nobles County, and part of Jackson County, Minnesota

The area described in this report is in southwestern Minnesota, about 130 miles southwest of Minneapolis and St. Paul. It includes; Nobles County and the western tier of townships in Jackson County, a total of 864 square miles. Worthington, the Nobles County seat, is the largest city in the area, having a population of 9,015 persons (1960 census). Farming is the leading occupation, and food processing is the major industry. Critical water shortages have occurred in several parts of the area. The climate is characterized by mild, subhumid summers and relatively long, severe winters. Mean monthly temperatures range from 15.1 °F in January to 73.3 °F in July. The mean annual precipitation is 26.75 inches. The crest of the Coteau des Prairies, a broad highland belt, traverses Nobles County from northwest to southeast. Three glacial end moraines and their associated ground moraines trend south to southeast across the area. Altitudes range from about 1,820 feet on the crest of the coteau in the northwestern part of the area to about 1,390 feet above mean sea level in the Jack and Okabena Creek valleys in the northeast. The Mississippi-Missouri River drainage divide crosses the area from north to east. The Gary outer end moraine trends southeast through central Nobles County. East of this moraine the land is poorly drained and contains numerous lakes and swamps; west of this moraine the land is well drained and contains few, if any, undrained depressions. Within the area, granite and Sioux Quartzite of Precambrian age are overlain by Cretaceous strata, except locally in the northeast and northwest parts of the area where the quartzite is directly overlain by glacial drift. The Cretaceous strata are composed of interbedded shale, siltstone, and sandstone. The surface of the area is composed of Pleistocene deposits of glacial drift and some thin, patchy deposits of Recent age. Bedrock is not known to crop out in the area. The drift ranges in thickness from about 150 feet in the southwest and northeast corners to about 500 feet on the highest part of the Coteau des Prairies. The Precambrian granite is not a source of ground water in this area. The Sioux Quartzite yields moderate supplies in adjacent counties to the north and west, but because of its sporadic occurrence it does not constitute an important water source in this area. The Cretaceous sandstone units are a secondary source of ground water and yield adequate supplies 'to at least 24 farm wells, which range in depth from 283 to 586 feet below land surface. The primary source of ground water in the Nobles-Jackson County area is the glacial drift. Buried outwash deposits supply water to 7 of the 10 municipalities and to most of the farms in the area. Two Worthington city wells, completed in a buried outwash deposit underlying East Okabena dry lake bed, were tested for short periods at 500 gallons per minute. The estimated coefficient of transmissibility for the aquifer at one of the wells was 70,000 gpd (gallons per day) per ft. The buried outwash deposits may occur anywhere within the drift from about 15 feet below land surface to bedrock which is as much as 500 feet below land surface. The outwash ranges from a fraction of a foot to more than 25 feet in thickness where permeable; below the water table it generally will supply ample quantities of water to properly constructed wells. Surflcial outwash deposits fill the valley bottoms and form the terrace deposits associated with the present-day drainage channels. The thicker, more extensive, and continuous deposits occur in the proglacial stream channels that drained the fronts of the ice sheets rather than in those channels that now drain the backs of the moraines. The surflcial outwash deposits generally are made up of sand, gravel and some silt and clay, and range in thickness from 0 to more than 60 feet; they range in width from a few feet in the narrow tributaries to about one mile in the larger stream valleys. Four municipalities and many farms obtain part or all of their water supplies from surficial outwash. An Adrian municipal well, completed in this source, was pumped at a rate of 400 gpm. At the confluence of two streams which drain Ocheda Lake in southeastern Nobles County, the sand and gravel section is more than 60 feet thick in places. Results of a pumping test here showed an average coefficient of transmissibility of 150,000 gpd per ft. Coefficients of transmissibility may be as much as 500,000 gdp per ft in the thickest part of the deposit if the permeability of the sand and gravel is uniform. Recharge to the surflcial outwash deposits is relatively rapid; it is slower to the buried outwash deposits where the descending water must percolate through till of low permeability before entering the aquifers. The quality of water in the Precambrian crystalline rocks, the Cretaceous strata, and the buried Pleistocene aquifers is poor. Chemical analyses of 22 water samples showed that dissolved solids ranged from 1,100 ppm (parts per million) to 3,050 ppm. Water from the surficial outwash deposits is good by comparison; dissolved solids in water from these aquifers ranged from 425 to 870 ppm.

Minnesota↗
USGS2012

Preliminary geologic map of the Big Costilla Peak area, Taos County, New Mexico, and Costilla County, Colorado

This map covers the Big Costilla Peak, New Mex.‒Colo. quadrangle and adjacent parts of three other 7.5 minute quadrangles: Amalia, New Mex.‒Colo., Latir Peak, New Mex., and Comanche Point, New Mex. The study area is in the southwesternmost part of that segment of the Sangre de Cristo Mountains known as the Culebra Range; the Taos Range segment lies to the southwest of Costilla Creek and its tributary, Comanche Creek. The map area extends over all but the northernmost part of the Big Costilla horst, a late Cenozoic uplift of Proterozoic (1.7-Ga and less than 1.4-Ga) rocks that is largely surrounded by down-faulted middle to late Cenozoic (about 40 Ma to about 1 Ma) rocks exposed at significantly lower elevations. This horst is bounded on the northwest side by the San Pedro horst and Culebra graben, on the northeast and east sides by the Devils Park graben, and on the southwest side by the (about 30 Ma to about 25 Ma) Latir volcanic field. The area of this volcanic field, at the north end of the Taos Range, has undergone significantly greater extension than the area to the north of Costilla Creek. The horsts and grabens discussed above are all peripheral structures on the eastern flank of the San Luis basin, which is the axial part of the (about 26 Ma to present) Rio Grande rift at the latitude of the map. The Raton Basin lies to the east of the Culebra segment of the Sangre de Cristo Mountains. This foreland basin formed during, and is related to, the original uplift of the Sangre de Cristo Mountains which was driven by tectonic contraction of the Laramide (about 70 Ma to about 40 Ma) orogeny. Renewed uplift and structural modification of these mountains has occurred during formation of the Rio Grande rift. Surficial deposits in the study area include alluvial, mass-movement, and glacial deposits of middle Pleistocene to Holocene age.

New Mexico↗
USGS1953

Pre-Cambrian geology of the Norway Lake area, Dickinson County, Michigan

The Norway Lake area straddles the south margin of the Sagola basin, an embayment of Ruronian sedimentary rocks into the west side of a complex of crystalline and sedimentary rocks of pre-Ruronian age. The north part of the Norway Lake area is underlain by the Randville dolomite, an unnamed succession of slates, Vulcan iron-formation, and interbedded slates and graywackes of the Sagola basin. The Sturgeon quartzite has not been definitely recognized in the Norway Lake area. The Handville dolomite is more than 800 feet thick and can be subdivided into upper and lower dolomite members separated by a slate member. The Vulcan iron-formation and the footwall slates are exposed only in the Deerhunt exploration. A thick section of red and gray slates with interbedded graywacke, of probable Upper Huronian age, underlies the northwest part of the mapped area. The south part of the Norway Lake area is underlain by granite gneiss, an arkose series, and schists, all of pre-Huronian age. The principal structural elements of the Norway Lake area are high angle faults, and such faults form most of the boundary between Huronian and pre-Huronian rocks in the area. The structure of the Huronian rocks. particularly in the vicinity of the Deerhunt exploration, cannot be determined with certainty on the basis of information now available. Magnetic anomalies were found to be associated with the slate member of the Randville dolomite, basalt interbedded with the arkose series, and a magnetite-bearing member in hornblende schist. It is possible that economic deposits of iron ore occur within the mapped area. However, exploration will be tedious and costly because of the structural complexity of the area and the paucity of exposures. Furthermore, the absence of strong magnetic anomalies, such as typically are present in areas known to be underlain by Vulcan iron-formation, suggests that the iron-formation is not present in abundance; in fact, it may be limited to the immediate vicinity of the Deerhunt exploration. Field mapping and petrographic examination do not provide data to determine whether the granite gneiss formed from a magma. Chemical analysis of one sample suggests that it was formed from rocks of the earth's crust rather than by fractional crystallization of a basaltic magma. The original feldspars of the granite gneiss were probably anorthoclase and analbite. During uplift and denudation these were changed to microcline microperthite and albite. These feldspars were contributed to the arkose series. During regional metamorphism of the granite gneiss and arkose replacement type microperthite and secondary perthite were formed, probably by redistribution of feldspars already present tither than by metasomatism.

Michigan↗
USGS1998

Geologic map of Paleozoic rocks in the Calico Hills, Nevada Test Site, southern Nevada

The Calico Hills area in the southwestern part of the Nevada Test Site, Nye County, Nevada, exposes a core of pre-Tertiary rocks surrounded by middle Miocene volcanic strata. This map portrays the very complex relationships among the pre-Tertiary stratigraphic units of the region. The Devonian and Mississippian rocks of the Calico Hills are distinct from age-equivalent carbonate-shelf or submarine-fan strata in other parts of the Nevada Test Site. The Calico Hills strata are interpreted to have been deposited beyond the continental shelf edge from alternating silicic and carbonate clastic sources. Structures of the Calico Hills area record the compounded effects of: 1) eastward-directed, foreland-vergent thrusting; 2) younger folds, kink zones, and thrusts formed by hinterland-vergent deformation toward northwesterly and northerly directions; and 3) low-angle normal faults that displaced blocks of Middle Paleozoic carbonate strata across the contractionally deformed terrane. All of these structures are older than any of the middle Miocene volcanic rocks that were erupted across the Calico Hills.

Nevada↗
USGS2013

Characterization of hydrodynamic and sediment conditions in the lower Yampa River at Deerlodge Park, east entrance to Dinosaur National Monument, northwest Colorado, 2011

The Yampa River in northwestern Colorado is the largest, relatively unregulated river system in the upper Colorado River Basin. Water from the Yampa River Basin continues to be sought for a number of municipal, industrial, and energy uses. It is anticipated that future water development within the Yampa River Basin above the amount of water development identified under the Upper Colorado River Endangered Fish Recovery Implementation Program and the Programmatic Biological Opinion may require additional analysis in order to understand the effects on habitat and river function. Water development in the Yampa River Basin could alter the streamflow regime and, consequently, could lead to changes in the transport and storage of sediment in the Yampa River at Deerlodge Park. These changes could affect the physical form of the reach and may impact aquatic and riparian habitat in and downstream from Deerlodge Park. The U.S. Geological Survey, in cooperation with the Colorado Water Conservation Board, began a study in 2011 to characterize the current hydrodynamic and sediment-transport conditions for a 2-kilometer reach of the Yampa River in Deerlodge Park. Characterization of channel conditions in the Deerlodge Park reach was completed through topographic surveying, grain-size analysis of streambed sediment, and characterization of streamflow properties. This characterization provides (1) a basis for comparisons of current stream functions (channel geometry, sediment transport, and stream hydraulics) to future conditions and (2) a dataset that can be used to assess channel response to streamflow alteration scenarios indicated from computer modeling of streamflow and sediment-transport conditions.

Colorado↗
USGS2017

Overview for geologic field-trip guides to Mount Mazama, Crater Lake Caldera, and Newberry Volcano, Oregon

These field-trip guides were written for the occasion of the International Association of Volcanology and Chemistry of the Earth’s Interior (IAVCEI) quadrennial scientific assembly in Portland, Oregon, in August 2017. The guide to Mount Mazama and Crater Lake caldera is an updated and expanded version of the guide (Bacon, 1989) for part of an earlier IAVCEI trip to the southern Cascade Range. The guide to Newberry Volcano describes the stops included in the 2017 field trip. Crater Lake and Newberry are the two best-preserved and most recent calderas in the Cascades Volcanic Arc. Although located in different settings in the arc, with Crater Lake on the arc axis and Newberry in the rear-arc, both volcanoes are located at the intersection of the arc and the northwest corner region of the extensional Basin and Range Province.

Oregon↗
USGS2023

Bedrock-surface elevation and overburden thickness maps of the five boroughs, New York City, New York

Digital maps of bedrock elevation and overburden thickness (depth to bedrock) were constructed for the five boroughs of New York City by the U.S. Geological Survey, in cooperation with the New York City Department of Design and Construction, from a compilation of historical and newly acquired data. Raster surfaces were interpolated from a point database containing data from more than 14,000 locations collected from a variety of sources. These data were collected between 1905 and 2021. These maps were constructed to supplement existing tools for the evaluation of potential construction of geothermal heat pump technology for buildings in New York City. The bedrock underlying the study area ranges from easily weathered to very resistant to weathering. This differential susceptibility to erosion, along with numerous north-northwest-trending faults, is believed to control the shape of the bedrock surface. Glacial scouring of the bedrock during the Pleistocene Epoch is the most recent control on the topography of bedrock surfaces. Overburden thickness is an important consideration for evaluation and construction of geothermal systems. Bedrock-surface elevation ranges from about 360 feet above sea level (in central Staten Island and northern Bronx) to 1,200 feet below sea level (in southern Queens) (North American Vertical Datum of 1988). The overburden thickness ranges from 0 foot thick at surface outcrops on Staten Island, Manhattan, and the Bronx, to 1,280 feet thick in southeastern Queens.

Data Report↗
USGS2016

Gravity and magnetic studies of the eastern Mojave Desert, California and Nevada

Introduction From May 2011 to August 2014, the U.S. Geological Survey (USGS) collected gravity data at more than 2,300 stations and physical property measurements on more than 640 rock samples from outcrops in the eastern Mojave Desert, California and Nevada. Gravity, magnetic, and physical-property data are used to study and locate regional crustal structures as an aid to understanding the geologic framework related to mineral resources of the eastern Mojave Desert. The eastern Mojave Desert is host to a world-class rare earth element carbonatite deposit located at Mountain Pass, California. Carbonatites are typically defined as magmatic rocks with high modal abundances of primary carbonate minerals >50 weight percent and elevated abundances of rare earth elements (REEs) (Nelson and others, 1988; Woolley and Kempe, 1989). The “Sulphide Queen” carbonatite ore deposit is a composite, tabular body made up of sills and dikes of REE-bearing sovites and beforsites that occurs just south of the Clark Mountain Range along a north-northwest trending fault-bounded block that extends along the northeast edge of the Mescal Range and northwestern extent of Ivanpah Mountains. This early to middle Proterozoic block is composed of a 1.7 Ga metamorphic complex of gneiss and schist that underwent widespread metamorphism and associated plutonism during the Ivanpah orogeny (Miller and others, 2007). Subsequently, these rocks were intruded by a series of granitoids, which included the 1.4 Ga (DeWitt and others, 1987) ultrapotassic alkaline suite of intrusions that are spatially and temporally associated with hundreds of dikes, outcrops, and a carbonatite ore body. The relative age sequence of this intrusive suite of alkaline rocks from oldest to youngest includes shonkinite, mesosyenite, syenite, quartz syenite, potassic granite, carbonatite, and late shonkinite dikes (Olson and others, 1954; Wooden and Miller, 1990; Haxel, 2005; Miller and others, 2007).

California, Nevada↗
USGS2002

An integrated geophysical and hydraulic investigation to characterize a fractured-rock aquifer, Norwalk, Connecticut

The U.S. Geological Survey conducted an integrated geophysical and hydraulic investigation at the Norden Systems, Inc. site in Norwalk, Connecticut, where chlorinated solvents have contaminated a fractured-rock aquifer. Borehole, borehole-to-borehole, surface-geophysical, and hydraulic methods were used to characterize the site bedrock lithology and structure, fractures, and transmissive zone hydraulic properties. The geophysical and hydraulic methods included conventional logs, borehole imagery, borehole radar, flowmeter under ambient and stressed hydraulic conditions, and azimuthal square-array direct-current resistivity soundings. Integrated interpretation of geophysical logs at borehole and borehole-to-borehole scales indicates that the bedrock foliation strikes northwest and dips northeast, and strikes north-northeast to northeast and dips both southeast and northwest. Although steeply dipping fractures that cross-cut foliation are observed, most fractures are parallel or sub-parallel to foliation. Steeply dipping reflectors observed in the radar reflection data from three boreholes near the main building delineate a north-northeast trending feature interpreted as a fracture zone. Results of radar tomography conducted close to a suspected contaminant source area indicate that a zone of low electromagnetic (EM) velocity and high EM attenuation is present above 50 ft in depth - the region containing the highest density of fractures. Flowmeter logging was used to estimate hydraulic properties in the boreholes. Thirty-three transmissive fracture zones were identified in 11 of the boreholes. The vertical separation between transmissive zones typically is 10 to 20 ft. Open-hole and discrete-zone transmissivity was estimated from heat-pulse flowmeter data acquired under ambient and stressed conditions. The open-hole transmissivity ranges from 2 to 86 ft2/d. The estimated transmissivity of individual transmissive zones ranges from 0.4 to 68 ft2/d. Drawdown monitoring in nearby boreholes under pumping conditions identified hydraulic connections along a northeast-southwest trend between boreholes as far as 560 ft apart. The vertical distribution of fractures can be described by power law functions, which suggest that the fracture network contains transmissive zones consisting of closely spaced fractures surrounded by a less fractured and much less permeable rock mass.

Connecticut↗