Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Map Sheet”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55Linked to original sources

National Civil Applications Program

The National Civil Applications Program (NCAP) is a component of the U.S. Geological Survey's (USGS) Mapping, Remote Sensing, and Geographic Investigations Program. The NCAP serves Federal civil agencies by providing for the acquisition, dissemination, and exploitation of classified remote sensing systems and data in support of mission responsibilities for land and resource management, environmental and scientific studies, homeland security, and hazards/disaster management. Civil applications of classified remotely sensed imagery began in 1969 when the USGS provided Federal civil agencies with access to imagery for various uses, including mapping, charting, geodesy, and management of the Nation's lands and resources. The Civil Applications Committee (CAC) was established in 1975 to provide oversight and coordination of these activities. The CAC is composed of 11 Federal departments and independent agencies. The USGS, through the Secretary of the Interior, is delegated responsibility to chair the CAC. The use of classified remotely sensed data has increased dramatically over the past 10 years. There has been an expanded emphasis on using data for environmental monitoring and research and for hazards detection, warning, and emergency response. To address the growing requirements and better serve the Federal civil community, the USGS expanded its investment in NCAP facilities and infrastructure during the 1990s. The USGS Advanced Systems Center (ASC) in Reston, Va., was built in 1993 and serves as the hub of NCAP operations. The USGS operates regional facilities in Denver, Colo.; Rolla, Mo.; Sioux Falls, S. Dak.; and Menlo Park, Calif. An interagency NCAP facility is located in Anchorage, Alaska. Each USGS facility provides the infrastructure, systems, and expertise required to support the growing diversity of civil applications.

Fact Sheet↗

Central San Juan caldera cluster: Regional volcanic framework

Eruption of at least 8800 km 3 of dacitic-rhyolitic magma as 9 major ash-slow sheets (individually 150-5000 km 3 ) was accompanied by recurrent caldera subsidence between 28.3 and about 26.5 Ma in the central San Juan Mountains, Colorado. Voluminous andesitic-decitic lavas and breccias were erupted from central volcanoes prior to the ash-flow eruptions, and similar lava eruptions continued within and adjacent to the calderas during the period of explosive volcanism, making the central San Juan caldera cluster an exceptional site for study of caldera-related volcanic processes. Exposed calderas vary in size from 10 to 75 km in maximum diameter, the largest calderas being associated with the most voluminous eruptions. After collapse of the giant La Garita caldera during eruption if the Fish Canyon Tuff at 17.6 Ma, seven additional explosive eruptions and calderas formed inside the La Garita depression within about 1 m.y. Because of the nested geometry, maximum loci of recurrently overlapping collapse events are inferred to have subsided as much as 10-17 km, far deeper than the roof of the composite subvolcanic batholith defined by gravity data, which represents solidified caldera-related magma bodies. Erosional dissection to depths of as much as 1.5 km, although insufficient to reach the subvolcanic batholith, has exposed diverse features of intracaldera ash-flow tuff and interleaved caldera-collapse landslide deposits that accumulated to multikilometer thickness within concurrently subsiding caldera structures. The calderas display a variety of postcollapse resurgent uplift structures, and caldera-forming events produced complex fault geometries that localized late mineralization, including the epithermal base- and precious-metal veins of the well-known Creede mining district. Most of the central San Juan calderas have been deeply eroded, and their identification is dependent on detailed geologic mapping. In contrast, the primary volcanic morphology of the symmetrically resurgent Creede caldera, the volcanic framework for Lake Creede, has been exceptionally preserved because of rapid infilling by moat sediments of the Creede Formation, which were preferentially eroded during the past few million years. The ash-flow tuffs and caldera of the central San Juan region have been widely recognized as exceptional sites for study of explosive volcanic processes, and the results reported here provide new insights into processes of pyroclastic eruption and emplacement, geometric interrelations between caldera subsidence and resurgence, the petrologic diversity of sequential ash-flow eruptions, recurrent eruption of intermediate-composition lavas after each caldera-forming event, associated regional fault development, volume relations between ash-flow eruptions and associated calderas, the emplacement of subvolcanic batholiths, and involvement of mantle-derived mafic phases in magma-generation processes.

Colorado↗

Critical Minerals in Ores (CMiO) database

Critical minerals are commodities essential to modern industrial and strategic technologies and are highly vulnerable to supply chain disruption. The Critical Minerals Mapping Initiative (CMMI) is a collaboration among the U.S. Geological Survey (USGS), the Geological Survey of Canada, and Geoscience Australia that aims to deepen global understanding of where critical minerals are located. A key output of this initiative is the Critical Minerals in Ores (CMiO) database that is advancing our collective understanding of critical minerals distributions. For instance, publicly available data on the concentrations of many critical minerals are sparse because these commodities can only be produced in small, yet essential, quantities compared to the primary commodities like copper and zinc. The CMiO database helps bridge this gap by offering high-quality, multielement geochemical data from a wide variety of critical mineral-bearing deposits around the world. Importantly, it uses a novel consensus deposit environment, group, and type classification scheme developed by the agencies that allows comparisons among ore deposits from different regions. The CMiO database contains geochemical data for more than 20,000 samples from more than 100 deposit types comprising 10 deposit environments.

Fact Sheet↗

Studies by the U.S. Geological Survey on sources, transport, and fate of agricultural chemicals

The U.S. Geological Survey's National Water-Quality Assessment (NAWQA) Program is assessing the sources, transport, and fate of chemicals applied to crops in agricultural basins across the Nation (referred to as "study units," see map). Chemicals selected for study include nutrients (nitrogen and phosphorus) and about 50 commonly used pesticides and their transformation products, including triazine and acetanilide herbicides such as atrazine and metolachlor, and organophosphorus insecticides such as chlorpyrifos and diazinon. The basins in the studies represent a range of agricultural settings—with varying crop types and agricultural practices related to tillage, irrigation, artificial drainage, and chemical use—as well as a range of landscapes with different geology, soils, topography, climate, and hydrology. Consistent methodology and analysis allow comparisons among the different basins. This study design leads to an improved understanding of the many factors that can affect the movement of water and chemicals in different agricultural settings (see "Complex factors," next page). Information from these studies will help with decision-making related to chemical use, conservation, and other farming practices that are used to reduce runoff of agricultural chemicals and sediment from fields. This information also will benefit the U.S. Environmental Protection Agency, the Department of Agriculture, local and regional water managers, and agricultural chemical manufacturers who are involved in managing chemical use and pesticide registration.

Fact Sheet↗

Land Cover Characterization Program

The U.S. Geological Survey (USGS) has a long heritage of leadership and innovation in land use and land cover mapping. The USGS Anderson system defined the principles for land use and land cover mapping that have been the model both nationally and internationally for more than 20 years. The Land Cover Characterization Program (LCCP) is founded on the premise that the Nation's needs for land cover and land use data are diverse and increasingly sophisticated. The range of projects, programs, and organizations that use land cover data to meet their planning, management, development, and assessment objectives has expanded significantly. The reasons for this are numerous, and include the improved capabilities provided by geographic information systems, better and more data-intensive analytic models, and increasing requirements for improved information for decision making. The overall goals of the LCCP are to: (1) identify the broad range of user requirements; (2) identify sources, develop procedures, and organize partners to deliver data and information to meet user requirements. The LCCP builds on the heritage and success of previous USGS land use and land cover programs and projects. It will be compatible with current concepts of government operations, the changing needs of the land use and land cover data users, and the technological tools with which the data are applied.

Fact Sheet↗

Climate change: evaluating your local and regional water resources

The BCM is a fine-scale hydrologic model that uses detailed maps of soils, geology, topography, and transient monthly or daily maps of potential evapotranspiration, air temperature, and precipitation to generate maps of recharge, runoff, snow pack, actual evapotranspiration, and climatic water deficit. With these comprehensive environmental inputs and experienced scientific analysis, the BCM provides resource managers with important hydrologic and ecologic understanding of a landscape or basin at hillslope to regional scales. The model is calibrated using historical climate and streamflow data over the range of geologic materials specific to an area. Once calibrated, the model is used to translate climate-change data into hydrologic responses for a defined landscape, to provide managers an understanding of potential ecological risks and threats to water supplies and managed hydrologic systems. Although limited to estimates of unimpaired hydrologic conditions, estimates of impaired conditions, such as agricultural demand, diversions, or reservoir outflows can be incorporated into the calibration of the model to expand its utility. Additionally, the model can be linked to other models, such as groundwater-flow models (that is, MODFLOW) or the integrated hydrologic model (MF-FMP), to provide information about subsurface hydrologic processes. The model can be applied at a relatively small scale, but also can be applied to large-scale national and international river basins.

Fact Sheet↗

The 3D Elevation Program—Supporting the economy of Massachusetts

Introduction Massachusetts extends from the mountains of the Appalachian system in the west of the State to the sandy beaches and rocky shorelines of the Atlantic coast in the east. Inland topographic data support a wide range of important activities, including geologic mapping, transportation planning, forest and wildlife management, quantifying ecological services, water supply protection, commonwealth-wide infrastructure planning, local site planning, and flood-plain management. Nearshore bathymetry can be used to support coastal portions of the Commonwealth by addressing the combined threats of ocean warming, strong storm surge, and rising sea levels. The maintenance and (or) expansion of Massachusetts ports (for instance, Boston, New Bedford) and Cape Cod sediment management depends upon the accurate mapping of bathymetry and the frequent influx of sediment and redeposition. Critical applications that address the broad range of requirements depend on light detection and ranging (lidar) data that provide a highly detailed three-dimensional (3D) model of the Earth’s surface and aboveground features. The 3D Elevation Program (3DEP) is managed by the U.S. Geological Survey (USGS) in partnership with Federal, State, Tribal, U.S. territorial, and local agencies to acquire consistent lidar coverage at quality level 2 or better to meet the many needs of the Nation and Massachusetts. The status of available and in-progress 3DEP baseline lidar data in Massachusetts is shown in figure 1. 3DEP baseline lidar data include quality level 2 or better, 1-meter or better digital elevation models, and lidar point clouds, and must meet the Lidar Base Specification version 1.2 ( https://www.usgs.gov/3dep/lidarspec ) or newer requirements. The National Enhanced Elevation Assessment identified user requirements and conservatively estimated that availability of lidar data would result in at least $1.23 million in new benefits annually to Massachusetts. The top 10 Massachusetts business uses for 3D elevation data, which are based on the estimated annual conservative benefits of 3DEP, are shown in table 2.

Massachusetts↗

Landsat's international partners

Since the launch of the first Landsat satellite 40 years ago, International Cooperators (ICs) have formed a key strategic alliance with the U.S. Geological Survey (USGS) to not only engage in Landsat data downlink services but also to enable a foundation for scientific and technical collaboration. The map below shows the locations of all ground stations operated by the United States and IC ground station network for the direct downlink and distribution of Landsat 5 (L5) and Landsat 7 (L7) image data. The circles show the approximate area over which each station has the capability for direct reception of Landsat data. The red circles show the components of the L5 ground station network, the green circles show components of the L7 station network, and the dashed circles show stations with dual (L5 and L7) status. The yellow circles show L5 short-term ("campaign") stations that contribute to the USGS Landsat archive. Ground stations in South Dakota and Australia currently serve as the primary data capture facilities for the USGS Landsat Ground Network (LGN). The Landsat Ground Station (LGS) is located at the USGS Earth Resources Observation and Science (EROS) Center in Sioux Falls, South Dakota. The Alice Springs (ASN) ground station is located at the Geoscience Australia facility in Alice Springs, Australia. These sites receive the image data, via X-band Radio Frequency (RF) link, and the spacecraft housekeeping data, via S-band RF link. LGS also provides tracking services and a command link to the spacecrafts.

Argentina;Australia;Brazil;Canada;China;Germany;In↗

The Alaska Geochemical Database: v. 1.0 - Geologic Materials

What is the AGDB?: The Alaska Geochemical Database (AGDB) is a new, comprehensive compilation of geologic, spatial, descriptive, mineralogical, and analytical geochemical data for samples collected in Alaska and surrounding waters by the U.S. Geological Survey (USGS) from 1962 to 2009. Data for geologic materials (rocks, minerals and mineral separates, soils, lake sediments, bulk stream sediments, and a variety of heavy-mineral concentrates) will be released as a two-sided DVD (USGS Digital Data Series DS 637 v. 1.0) in October of 2011. Future data releases will include water, organic and leachate samples. The AGDB contains all Alaskan data from USGS legacy databases (for example, the RASS and PLUTO systems), and all results produced by USGS in-house and contract chemistry laboratories through December 2009. The database includes geochemical data resulting from the reanalysis of archived materials, such as those from the Alaska Mineral Resource Assessment (AMRAP) and National Uranium Resource Evaluation (NURE) programs, for additional elements and by newer methods. Reanalyses include samples collected statewide as part of the National Geochemical Survey, and samples from a project across the Alaska Range (data released in 2010). The AGDB also contains data for geologic materials from Alaska submitted by USGS researchers to non-USGS and non-contract labs, and a variety of other Alaskan geologic materials samples. Quality Control: Data in the AGDB have undergone extensive quality control screening including searching field notes and maps for accurate location information, verifying media and sample type, linking analytical data to geologic parameters recorded by the submitter, and documenting sample preparation and analytical methods. Data Files The AGDB v. 1.0 two-sided DVD includes: * a 4.3 GB Microsoft Access® 2007 relational database (as two linked .mdb files); * the same database in Microsoft Access® 2003; * Microsoft Excel® spreadsheet tables (.xls files) and ASCII text files that display the results of common queries to the database (for example, Ag-Cr values for concentrate samples; rock samples by quadrangle); * references for analytical methods; * references to published data; and * metadata in three file formats. Data Availability: * The Alaska Geochemical Database will be available in a searchable, spatially referenced, online format at http://mrdata.usgs.gov/; estimated availability early 2012. * A 2012 update (AGDB v. 2.0) will include water, organic, leachate, and miscellaneous sample media. For More Information: On sample media or analytical methods: http://minerals.cr.usgs.gov/projects/analytical_chem/references.html Text prepared by Jeanine M. Schmidt and Matt Granitto Figure prepared by Nora Shew; Layout by Jeanine Schmidt Artwork on page 1 by Daniel Granitto (used by permission) The USGS Mineral Resources Program is the sole Federal provider of research and information on nonfuel mineral resources.

Fact Sheet↗

Physical subdivision and description of the water-bearing sediments of the Santa Clara Valley, California

A thick Quaternary alluvial section fills a sedimentary basin beneath the Santa Clara Valley, California, located within the San Andreas Fault system at the south end of San Francisco Bay. This section consists of an upper sequence about 1,000 feet thick containing eight sedimentary cycles and a lower fine-grained unit as thick as several hundred feet. Together these constitute the Quaternary Santa Clara Basin. The section overlies an irregular unconformity with more than 1,200 feet of relief cut into the underlying bedrock. This stratigraphy is determined through study of new wells and seismic reflection profiles, together with a sample of the many thousands of water wells in the valley. It represents a major change and improvement in understanding of the basin, particularly with regard to the upper cyclic sequence, which forms a large groundwater system that is an important resource in the San Francisco Bay region. Each of the eight sedimentary cycles consists of a coarse-grained bottom interval overlain by a fine-grained top, with the coarse bottom forming a permeable sheet that is more or less continuous around the basin and the fine top forming a similarly extensive, relatively impermeable confining layer. This stratigraphic organization contrasts with most previous views, which have considered the coarse sediment in the basin to occur as scattered, discrete lenses and (or) sinuous channel sands, all embedded in a predominantly fine-grained section. Temperature logs in several wells demonstrate that the fine cycle tops do limit vertical movement of groundwater, although this may not be the case where those tops are thin to perhaps locally absent around parts of the basin margin. Age control has been obtained from previous work, in which the sedimentary cycles were correlated with the marine oxygen isotope record and the ages of two deeper Quaternary unconformities were estimated, and from detailed paleomagnetic study of cores from the new wells by E.A. Mankinen. Despite careful search of the cores, very few fossils were found, and none that are helpful in subdividing the section. No tephra (volcanic ash) was recovered, and the few carbon samples found and dated radiometrically are limited to the upper 120 feet of the section. The upper cyclic section ranges in age from 0 to somewhat older than 718 thousand years (ka), and the lower fine-grained section lies between unconformities with estimated ages of 950 and 1500 ka. Reflections in the seismic profiles indicate that layering in the basin is subparallel to the ground surface, and this fact, together with the continuous stratigraphic detail provided by geophysical logs of the new wells, allows the confident interwell correlation required to delineate the sedimentary cycles. The sequence of layers within any one cycle tends to persist laterally between the wells in the dataset, which are spaced 1 to 3 km apart, with most changes occurring gradually. The eight cycles, in contrast, tend to differ from each other in the details of their internal organization. Maps and cross sections show the elevations of cycle boundaries and the underlying bedrock surface, the varying thicknesses of the cycles and of their fine tops and coarse bottoms, and the aggregate thickness of coarse layers in those bottom intervals. Coarse sediment is more abundant toward some parts of the basin margin and in the southern part of the basin. Cycle boundary surfaces are relatively smooth, and their shapes are consistent with having been intercycle topographic surfaces. The underlying bedrock surface has a relief of more than 1,200 feet and deepens toward the center of the basin and the west edge of the fault-bounded Evergreen Basin, which is concealed beneath the east side of the Quaternary basin. The absence of consistent abrupt changes in thicknesses or boundary elevations across the basin or in cross section indicates that the interior of the basin is largely unfaulted, with the Silver Creek strand of the San Andreas system at the west edge of the Evergreen Basin being the sole exception. The east and west margins of the Santa Clara Basin, in contrast, are marked by reverse and thrust fault systems.

California↗

The 3D Elevation Program—Supporting Rhode Island’s economy

Introduction High-resolution elevation data are critical to applications of landscape modeling and planning, both of which have a significant effect on Rhode Island’s economy. In these and other enterprises, program managers, while aiming to strike a balance between accuracy and cost, strive to obtain the best available elevation data to help them address a range of issues. Programs focused on climate change, environmental management, transportation design and asset management, aviation navigation and safety, riverine ecosystem management, wildlife habitat characterization and management, shellfish aquaculture, and the management and mapping of forests, parks and recreation areas, soils, wetlands, and impervious surfaces are also among the critical applications that meet the State’s management needs and depend on light detection and ranging (lidar) data that provide a highly detailed three-dimensional (3D) model of the Earth’s surface and aboveground features. The 3D Elevation Program (3DEP) is managed by the U.S. Geological Survey (USGS) in partnership with Federal, State, Tribal, U.S. territorial, and local agencies to acquire consistent lidar coverage at quality level 2 or better to meet the many needs of the Nation and Rhode Island. The status of available and in-progress 3DEP baseline lidar data in Rhode Island is shown in figure 1. 3DEP baseline lidar data include quality level 2 or better, 1-meter or better digital elevation models, and lidar point clouds, and must meet the Lidar Base Specification version 1.2 ( https://www.usgs.gov/3dep/lidarspec ) or newer requirements. The National Enhanced Elevation Assessment identified user requirements and conservatively estimated that availability of lidar data would result in at least $178,560 in new benefits annually to the State. The top 10 Rhode Island business uses for 3D elevation data, which are based on the estimated annual conservative benefits of 3DEP, are shown in table 2.

Rhode Island↗

Deformational and erosional history for the Abiquiu and contiguous area, north-central New Mexico: Implications for formation of the Abiquiu embayment and a discussion of new geochronological and geochemical analysis

Geologic mapping, age determinations, and geochemistry of rocks exposed in the Abiquiu area of the Abiquiu embayment of the Rio Grande rift, north-central New Mexico, provide data to determine fault-slip and incision rates. Vertical-slip rates for faults in the area range from 16 m/m.y. to 42 m/m.y., and generally appear to decrease from the eastern edge of the Colorado Plateau to the Abiquiu embayment. Incision rates calculated for the period ca. 10 to ca. 3 Ma indicate rapid incision with rates that range from 139 m/m.y. on the eastern edge of the Colorado Plateau to 41 m/m.y. on the western part of the Abiquiu embayment. The Abiquiu area is located along the margin of the Colorado Plateau–Rio Grande rift and lies within the Abiquiu embayment, a shallow, early extensional basin of the Rio Grande rift. Cenozoic rocks include the Eocene El Rito Formation, Oligocene Ritito Conglomerate, Oligocene–Miocene Abiquiu Formation, and Miocene Chama–El Rito and Ojo Caliente Sandstone Members of the Tesuque Formation (Santa Fe Group). Volcanic rocks include the Lobato Basalt (Miocene; ca. 15–8 Ma), El Alto Basalt (Pliocene; ca. 3 Ma), and dacite of the Tschicoma Formation (Pliocene; ca. 2 Ma). Quaternary deposits consist of inset axial and side-stream deposits of the ancestral Rio Chama (Pleistocene in age), landslide and pediment alluvium and colluvium, and Holocene main and side-stream channel and floodplain deposits of the modern Rio Chama. The predominant faults are Tertiary normal high-angle faults that displace rocks basinward. A low-angle fault, referred to as the Abiquiu fault, locally separates an upper plate composed of the transitional zone of the Ojo Caliente Sandstone and Chama–El Rito Members from a lower plate consisting of the Abiquiu Formation or the Ritito Conglomerate. The upper plate is distended into blocks that range from about 0.1 km to 3.5 km long that may represent a larger sheet that has been broken up and partly eroded. Geochronology ( 40 Ar/ 39 Ar) from fifteen volcanic and intrusive rocks resolves discrete volcanic episodes in the Abiquiu area: (1) emplacement of Early and Late Miocene basaltic dikes at 20 Ma and ca. 10 Ma; (2) extensive Late Miocene–age lava flows at 9.5 Ma, 7.9 Ma, and 5.6 Ma; and (3) extensive basaltic eruptions during the early Pliocene at 2.9 Ma and 2.4 Ma. Clasts of biotite- and hornblende-rich trachyandesites and trachydacites from the base of the Abiquiu Formation are dated at ca. 27 Ma, possibly derived from the Latir volcanic field. The most-mafic magmas are interpreted to be generated from a similar lithospheric mantle during rifting, but variations in composition are correlated with partial melting at different depths, which is correlated with thinning of the crust due to extensional processes.

GSA Special Papers↗

Mapping grasslands suitable for cellulosic biofuels in the Greater Platte River Basin, United States

Biofuels are an important component in the development of alternative energy supplies, which is needed to achieve national energy independence and security in the United States. The most common biofuel product today in the United States is corn-based ethanol; however, its development is limited because of concerns about global food shortages, livestock and food price increases, and water demand increases for irrigation and ethanol production. Corn-based ethanol also potentially contributes to soil erosion, and pesticides and fertilizers affect water quality. Studies indicate that future potential production of cellulosic ethanol is likely to be much greater than grain- or starch-based ethanol. As a result, economics and policy incentives could, in the near future, encourage expansion of cellulosic biofuels production from grasses, forest woody biomass, and agricultural and municipal wastes. If production expands, cultivation of cellulosic feedstock crops, such as switchgrass ( Panicum virgatum L. ) and miscanthus ( Miscanthus species ), is expected to increase dramatically. The main objective of this study is to identify grasslands in the Great Plains that are potentially suitable for cellulosic feedstock (such as switchgrass) production. Producing ethanol from noncropland holdings (such as grassland) will minimize the effects of biofuel developments on global food supplies. Our pilot study area is the Greater Platte River Basin, which includes a broad range of plant productivity from semiarid grasslands in the west to the fertile corn belt in the east. The Greater Platte River Basin was the subject of related U.S. Geological Survey (USGS) integrated research projects.

Colorado;Nebraska;South Dakota;Wyoming↗

Arkansas StreamStats: A U.S. Geological Survey web map application for basin characteristics and streamflow statistics

The U.S. Geological Survey (USGS) provides streamflow and other related information needed by water-resource managers responsible for protecting people and property from floods, planning and managing water-resource activities, and protecting water quality. Streamflow statistics provided by the USGS, such as the 1-percent annual exceedance probability (100-year flood) and the 7-day 10-year low flow, are frequently used by engineers, flood forecasters, land managers, biologists, and others to guide their everyday decisions. Additionally, resource managers often need to know basin characteristics, the physical and climatic characteristics of a drainage basin, to help understand the mechanisms that control water availability, water quality, and aquatic habitats at various locations. Users of streamflow information often require streamflow statistics and basin characteristics at various locations along a stream. The USGS periodically calculates and publishes streamflow statistics and basin characteristics for streamflowgaging stations and partial-record stations, but these data commonly are scattered among many reports that may or may not be readily available to the public. The USGS also provides and periodically updates regional analyses of streamflow statistics that include regression equations and other prediction methods for estimating statistics for ungaged and unregulated streams across the State. Use of these regional predictions for a stream can be complex and often requires the user to determine a number of basin characteristics that may require interpretation. Basin characteristics may include drainage area, classifiers for physical properties, climatic characteristics, and other inputs. Obtaining these input values for gaged and ungaged locations traditionally has been time consuming, subjective, and can lead to inconsistent results.

Arkansas↗

New studies initiated by the U.S. Geological Survey - Effects of nutrient enrichment on stream ecosystems

In 2001, the U.S. Geological Survey’s National Water-Quality Assessment (NAWQA) Program began an intensive study of nutrient enrichment elevated concentrations of nitrogen and phosphorus in streams in five agricultural basins across the Nation (see map, p. 2). This study is providing nationally consistent and comparable data and analyses of nutrient conditions, including how these conditions vary as a result of natural and human-related factors, and how nutrient conditions affect algae and other biological communities. This information will benefit stakeholders, including the U.S. Environmental Protection Agency (USEPA) and its partners, who are developing nutrient criteria to protect the aquatic health of streams in different geographic regions. Nutrient enrichment is one of five national priority topics addressed by NAWQA in its second decade of studies, which began in 2001. During its first round of assessments in 51 major river basins (referred to as “Study Units”), NAWQA scientists collected data on water chemistry, stream hydrology and habitat, and biological communities; currently, NAWQA is revisiting selected basins and focusing on (1) trends, (2) factors that affect water quality and aquatic health, and (3) national priority water issues related to, for example, the development of nutrient criteria, source-water protection strategies, and stream restoration plans. The nutrient enrichment study has four major objectives that address nutrient conditions, dissolved oxygen, aquatic communities, and geographic and landscape features in agricultural basins (see inset). The focus on agricultural streams is a starting point. As the study progresses, streams draining other land uses, such as those in residential and urban areas, will likely be added.

Fact Sheet↗

Surficial geology and soils of the Elmira-Williamsport region, New York and Pennsylvania, with a section on forest regions and great soil groups

The Elmira-Williamsport region, lying south of the Finger Lakes in central New York and northern Pennsylvania, is part of the Appalachian Plateaus physiographic province. A small segment of the Valley and Ridge province is included near the south border. In 1953 and 1954, the authors, a geologist and a soil scientist, made a reconnaissance of about 5,000 square miles extending southward from the Finger Lakes, N.Y., to Williamsport, Pa., and eastward from Wellsboro, Pa., to Towanda, Pa. Glacial drift of Wisconsin age, covering the central and most of the northern parts of the region, belongs to the Olean substage of MacClintock and Apfel. This drift is thin and patchy, is composed of the relatively soft sandstones, siltstone, shales, and conglomerates of the plateaus, commonly has a low calcium carbonate content, and is deeply leached. Mantling its surface are extensive rubbly colluvial deposits. No conspicuous terminal moraine marks the relatively straight border of Olean drift. The Valley Heads moraine of Fairchild near the south ends of the Finger Lakes is composed of relatively thick drift containing a considerable amount of somewhat resistant sedimentary and crystalline rocks. Commonly this drift has a relatively high carbonate content and is leached to only shallow depths. The Valley Heads drift is younger than Olean, but its precise age is undetermined. The age of the Olean is perhaps between Sangamon and Farmdale, on the basis of, in part, a carbon-14 date from peat at Otto, N.Y. All differences in soil development on these two Wisconsin drifts are clearly related to the lithology of the parent material or the drainage, rather than to weathering differing in kind or in duration. The authors believe that the soils are relatively young, are in equilibrium with the present environment, and contain few, if any, features acquired during past weathering intervals. The effect of tree throw on soil profiles and the presence of soils on slopes clearly indicate that soils form rapidly. Sols Bruns Acides are the most extensive great soil group occurring throughout the region. Podzols and Gray-Brown Podzolic soils are also widespread, and on long, smooth slopes Low Humic-Gley soils are common. Organic soils are of small extent. South of the Wisconsin drift border, the surficial mantle consists chiefly of alluvial, colluvial, or residual deposits of Wisconsin or of Recent age, but there are many small isolated patches of older, strongly weathered materials of pre-Wisconsin age. Although such older materials are commonly overlain or mixed with less weathered mantle, the yellowish-red color, characteristic of the strongly weathered material, is generally not masked. Some of the older material is drift, presumed to be of Illionian age, that was probably strongly weathered to a considerable depth in Sangamon time and has been greatly eroded since the last interglacial period. No clear-cut exposure of Wisconsin drift resting on older drift or other strongly weathered mantle has been found. The old drift and the other strongly weathered materials apparently acquired their present red color in pre-Wisconsin time. Where exposed at the surface, such strongly weathered mantle is the parent material of modern Red-Yellow Podzolic soils. Sols Bruns Acides and Gray-Brown Podzolic soils, developed on slightly weathered parent materials, are found adjacent to these red soils. This suggests that these Red-Yellow Podzolic soils probably developed from strongly weathered parent materials. No buried soils were found nor were any soils recognized as relics from pre-Wisconsin time. Comparison of a map of the great soil groups with a map of the vegetation of the region, prepared by John C. Goodlett, does not reveal a close relation. Laboratory analyses of samples collected furnish data on textural, mineralogical, and chemical changes caused by weathering and soil formation. The results indicate that the amount of chemical weathering which the Wisconsin drift has undergone is slight. The Red-Yellow Podzolic soils on strongly weathered pre-Wisconsin drift have B2 horizons that have a finer texture than the A2 or C horizons. The parent materials of these soils seem to be strongly weathered because of the high chromas, reddish hues, friable condition of most rock fragments, relatively high kaolinite content, and presence of gibbsite in the clay fraction. Measurements at numerous localities show that the depth of leaching increases with decreasing carbonate content and is not a criterion of the age of the drift. Pebble counts of gravels also show that the depth of leaching of gravel is related to its limestone content. The location of the gravel deposits is probably due primarily to the presence of pebbles of resistant rock rather than to ice wastage involving abundant glacial melt water. The region is in the Susquehanna drainage basin except for its north fringe, which drains to Lake Ontario. Most of the region is a dissected plateau ranging in altitude from 700 to 2,500 feet and underlain by gently folded sedimentary rocks of Paleozoic age. Much of the region slopes moderately or steeply; the most extensive areas of gently sloping land are 011 the uplands. In the northern part are several straight and deep valleys the southern extension of the Finger Lakes basins separated by uplands with several low cuestas that face north. Similarly, some streams such as the Canisteo, Cohocton, and Chemung Rivers, and the part of the Susquehanna River that is in New York, trend at right angles to the Finger Lakes, flowing in valleys that parallel the regional strike of the bedrock. The Olean drift border is marked by a change from drift containing very few rounded or striated rock fragments to a mantle containing only angular rock fragments and traces of red, strongly weathered materials. A reconstruction of the surface of the ice sheet, at its maximum extent shows an inferred slope of its distal margin ranging from 100 to 500 feet per mile

New York, Pennsylvania↗

North polar region of Mars: Advances in stratigraphy, structure, and erosional modification

We have remapped the geology of the north polar plateau on Mars, Planum Boreum, and the surrounding plains of Vastitas Borealis using altimetry and image data along with thematic maps resulting from observations made by the Mars Global Surveyor, Mars Odyssey, Mars Express, and Mars Reconnaissance Orbiter spacecraft. New and revised geographic and geologic terminologies assist with effectively discussing the various features of this region. We identify 7 geologic units making up Planum Boreum and at least 3 for the circumpolar plains, which collectively span the entire Amazonian Period. The Planum Boreum units resolve at least 6 distinct depositional and 5 erosional episodes. The first major stage of activity includes the Early Amazonian (∼3 to 1 Ga) deposition (and subsequent erosion) of the thick (locally exceeding 1000 m) and evenly-layered Rupes Tenuis unit (A b rt), which ultimately formed approximately half of the base of Planum Boreum. As previously suggested, this unit may be sourced by materials derived from the nearby Scandia region, and we interpret that it may correlate with the deposits that regionally underlie pedestal craters in the surrounding lowland plains. The second major episode of activity during the Middle to Late Amazonian ( &#x223C; &lt; "> ∼< 1 Ga) began with a section of dark, sand-rich and light-toned ice-rich irregularly-bedded sequences (Planum Boreum cavi unit, A b b c ) along with deposition of evenly-bedded light-toned ice- and moderate-toned dust-rich layers (Planum Boreum 1 unit, A b b 1 ). These units have transgressive and gradational stratigraphic relationships. Materials in Olympia Planum underlying the dunes of Olympia Undae are interpreted to consist mostly of the Planum Boreum cavi unit (A b b c ). Planum Boreum materials were then deeply eroded to form spiral troughs, Chasma Boreale, and marginal scarps that define the major aspects of the polar plateau's current regional topography. Locally- to regionally-extensive (though vertically minor) episodes of deposition of evenly-bedded, light- and dark-toned layered materials and subsequent erosion of these materials persisted throughout the Late Amazonian. Sand saltation, including dune migration, is likely to account for much of the erosion of Planum Boreum, particularly at its margin, alluding to the lengthy sedimentological history of the circum-polar dune fields. Such erosion has been controlled largely by topographic effects on wind patterns and the variable resistance to erosion of materials (fresh and altered) and physiographic features. Some present-day dune fields may be hundreds of kilometers removed from possible sources along the margins of Planum Boreum, and dark materials, comprised of sand sheets, extend even farther downwind. These deposits also attest to the lengthy period of erosion following emplacement of the Planum Boreum 1 unit. We find no evidence for extensive glacial flow, topographic relaxation, or basal melting of Planum Boreum materials. However, minor development of normal faults and wrinkle ridges may suggest differential compaction of materials across buried scarps. Timing relations are poorly-defined mostly because resurfacing and other uncertainties prohibit precise determinations of surface impact crater densities. The majority of the stratigraphic record may predate the recent (<20 Ma) part of the orbitally-driven climate record that can be reliably calculated. Given the strong stratigraphic but loose temporal constraints of the north polar geologic record, a comparison of north and south polar stratigraphy permits a speculative scenario in which major Amazonian depositional and erosional episodes driven by global climate activity is plausible.

Icarus↗

Geologic Cross Section E-E' through the Appalachian Basin from the Findlay Arch, Wood County, Ohio, to the Valley and Ridge Province, Pendleton County, West Virginia

Geologic cross section E-E' is the first in a series of cross sections planned by the U.S. Geological Survey (USGS) to document and improve understanding of the geologic framework and petroleum systems of the Appalachian basin. Cross section E-E' provides a regional view of the structural and stratigraphic framework of the basin from the Findlay arch in northwestern Ohio to the Valley and Ridge province in eastern West Virginia, a distance of approximately 380 miles (mi) (fig. 1, on sheet 1). Cross section E-E' updates earlier geologic cross sections through the central Appalachian basin by Renfro and Feray (1970), Bennison (1978), and Bally and Snelson (1980) and a stratigraphic cross section by Colton (1970). Although other published cross sections through parts of the basin show more structural detail (for example, Shumaker, 1985; Kulander and Dean, 1986) and stratigraphic detail (for example, Ryder, 1992; de Witt and others, 1993; Hettinger, 2001), these other cross sections are of more limited extent geographically and stratigraphically. Although specific petroleum systems in the Appalachian basin are not identified on the cross section, many of their key elements (such as source rocks, reservoir rocks, seals, and traps) can be inferred from lithologic units, unconformities, and geologic structures shown on the cross section. Other aspects of petroleum systems (such as the timing of petroleum generation and preferred migration pathways) may be evaluated by burial history, thermal history, and fluid flow models based on information shown on the cross section. Cross section E-E' lacks the detail to illustrate key elements of coal systems (such as paleoclimate, coal quality, and coal rank), but it does provide a general framework (stratigraphic units and general rock types) for the coal-bearing section. Also, cross section E-E' may be used as a reconnaissance tool to identify plausible geologic structures and strata for the subsurface storage of liquid waste (for example, Colton, 1961; Lloyd and Reid, 1990) or for the sequestration of carbon dioxide (for example, Smith and others, 2002; Lucier and others, 2006).

Scientific Investigations Map↗