Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Journal of Geological Research”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55Linked to original sources
USGS2023

Quantifying site effects and their influence on earthquake source parameter estimations using a dense array in Oklahoma

We investigate the effects of site response on source parameter estimates using earthquakes recorded by the LArge-n Seismic Survey in Oklahoma (LASSO). While it is well known that near-surface unconsolidated sediments can cause an apparent breakdown of earthquake self-similarity, the influence of laterally varying site conditions remains unclear. We analyze site conditions across the 1825-station array on a river plain within an area of 40 km by 23 km using vertical ground motions from 14 regional earthquakes. While the source radiation pattern controls P-wave ground motions below 8 Hz, the surface geology correlates with P-wave ground motions above 8 Hz and S-wave ground motions at 2–21 Hz. Stations installed in alluvial sediments have vertical ground motions that can exceed three times the array median. We use the variation of ground motion of regional earthquakes across the array as a proxy for site effects. The corner frequencies and stress drops of local earthquakes ( M L = 0.01–3) estimated using a standard single-spectra approach show negative correlations with the site-effect proxy, while the seismic moments show positive correlations. In contrast, the spectral-ratio approach effectively shows no correlation. The overall bias is small as expected for this relatively homogeneous structure; accurate estimation of site-related biases requires at least 30 stations. Correcting for site-related biases reduces the standard deviations of the source parameters by less than 13% of the total variations. Remaining variations are partially associated with source directivity and model misfits— as small earthquakes can have complex ruptures.

Oklahoma↗
USGS1994

The geologic history of Redoubt Volcano, Alaska

Redoubt Volcano is a composite cone built on continental crust at the northeast end of the Aleutian arc. Magmas erupted at Redoubt are medium-K calc-alkaline basalts, andesites, and dacites. The eruptive history of the volcano can be divided into four parts: the early explosive stage, early cone-building stage, late cone-building stage, and post-glacial stage. The most silicic products of the volcano were erupted during the early explosive stage about 0.888 Ma and include pumiceous pyroclastic flow deposits, block-and-ash flow deposits, and a dome or shallow intrusive complex. Basalt and basaltic andesite lava flows and scoria and ash flows were produced during the early cone-building stage, which was underway by 0.340 Ma. During the late cone-building stage, andesitic lava flows and block-and-ash flows were emplaced. Airfall deposits produced during post-glacial eruptions are silicic andesite in composition. Since the early cone-building stage, magmas have become progressively more silicic, but none are as silicic as those in the early explosive stage. Limited Pb and Sr isotopic data suggest that Redoubt magmas were contaminated by North American continental crust. ?? 1994.

Journal of Volcanology and Geothermal Research↗
USGS2020

Partly cloudy with a chance of lava flows: Forecasting volcanic eruptions in the 21st century

A primary goal of volcanology is forecasting hazardous eruptive activity. Despite much progress over the last century, however, volcanoes still erupt with no detected precursors, lives and livelihoods are lost to eruptive activity, and forecasting the onsets of eruptions remains fraught with uncertainty. Long‐term forecasts are generally derived from the geological and historical records, from which recurrence intervals and styles of activity can be inferred, while shorter‐term forecasts are derived from patterns in monitoring data. Information from geology and monitoring data can be evaluated and combined using statistical analysis, expert elicitation, and conceptual and or mathematical models. Integrative frameworks, such as event trees, combine this diversity of information to produce probabilistic forecasts that can inform the style and scale of the societal response to a potential future eruption. Several developments show promise to revolutionize the utility and accuracy of these forecasts. These include growth in the quantity and quality of multidisciplinary monitoring data, coupled with increases in computing power; machine learning algorithms, which will allow far better utilization of this growing volume of data; and new physiochemical volcano models and data assimilation algorithms, which take advantage of a wide range of monitoring data and realistic physics to better predict the evolution of a given physical state. Although eruption forecasts may never be as generally reliable as weather forecasts, and great caution must be exercised when attempting to predict highly complex volcanic behavior, these and other innovations—particularly when combined in integrative, fully probabilistic forecasting frameworks—should help volcanologists to better issue warnings of volcanic activity on societally relevant time frames.

Hawaii↗
USGS2009

Sediment characterization and dynamics in Lake Pontchartrain, Louisiana

Lake Pontchartrain in southeastern Louisiana is the largest of several shallow estuaries that together cover over 15,000 km 2 . Wetlands, forests, and large urban areas surround the lake. Primary transport mechanisms of sediments to Lake Pontchartrain include urban runoff, major diversions of the Mississippi River, discharge from streams along the north and west shores, and tidal circulation. Sediments deposited in Lake Pontchartrain are subjected to resuspension and mixing by natural and human activities. Bioturbation and water turbulence throughout the lake are the major mixing agents, and mechanical shell dredging has reworked much of the lake bottom over the last century. Sediment characterization through direct sampling and geophysical surveys indicates that these processes continually rework the top meter of sediment. The lake receives discharge from roadways and industrial and agricultural sources. Contaminants from these sources accumulate in the lake sediments and are an important contributor to the degradation of the estuary. Decline in populations of various benthic organisms, such as shrimp and clams, has been documented in the lake. To characterize the health of this important estuary, the U.S. Geological Survey (USGS) conducted a comprehensive evaluation of the geology, geomorphology, coastal processes, and environmental condition of the Pontchartrain Basin from 1994 to 1997. This report presents an assessment of sediment distribution and quality using a multidisciplinary approach to characterize the influence of various physical and chemical parameters: nearsurface stratigraphy, major trace metal concentrations (Cu, Pb, Zn, and Ni), and short-lived radionuclides ( 210 Pb, 7 Be, and 137 Cs). The results are compared with water-circulation patterns to determine high-resolution sedimentation patterns in the lake. The data show a significant increase in trace metals in the top 1 m of lake sediments. Above this horizon, pollen analysis indicates a correlation with land clearing in the area, a proxy for increasing human development of the surrounding landscape and an increase in surface run-off. The data also show that the top meter of sediment undergoes frequent resuspension during high-energy circulation events and via circulation gyres in the lake. This regular turnover does not allow stratification of recently deposited sediments, restricting the sequestration of contaminated material that enters the lake.

Louisiana↗
USGS1995

Seafloor environments within the Boston Harbor- Massachusetts Bay sedimentary system: A regional synthesis

Modern seafloor sedimentary environments within the glaciated, topographically complex Boston Harbor and Massachusetts Bay area have been interpreted and mapped from an extensive collection of sidescan sonar records and supplemental marine geologic data. Three categories of environments are present that reflect the dominant long-term processes of erosion or nondeposition, deposition, and sediment reworking. (1) Environments of erosion or nondeposition comprise exposures of bedrock, glacial drift, coarse lag deposits, and possibly coastal plain rocks that contain sediments (where present) ranging from boulder fields to gravelly sands and occur in areas of relatively strong currents. (2) Environments of deposition contain fine-grained sediments ranging from muddy sands to muds that have accumulated in areas of predominantly weak bottom currents. (3) Environments of sediment reworking contain patches with textures ranging from sandy gravels to muds that have been produced by a combination of erosion and deposition in areas with variable bottom currents. The distribution of sedimentary environments across the Boston Harbor-Massachusetts Bay area is extremely patchy. Locally, this patchiness is due either to modifications of bottom-current strength (caused by the irregular topography and differences in water depth) or to small-scale changes in the supply of fine-grained sediments. Regional patchiness, however, reflects differences in geologic and oceanographic conditions among the estuarine, inner shelf, and basinal parts of the sedimentary system. The estuarine part of the system (Boston Harbor) is a depositional trap for fine-grained sediments because it is protected from large waves, has generally weak and variable tidal currents, and receives a large supply of fine grained detritus from natural and anthropogenic sources. The inner shelf, on the other hand, is largely an area of erosion or nondeposition due to sediment removal and redistribution during past sea-level changes, to sediment resuspension and winnowing by modern waves and currents, and to an inadequate supply of fine-grained sediments. The basinal part of the system (Stellwagen Basin) is mainly a tranquil depositional environment in which fine-grained sediments from several potential sources settle through the water column and accumulate under weak bottom currents. This study indicates areas within the Boston Harbor-Massachusetts Bay sedimentary system where fine-grained sediments and associated contaminants are likely to be either moved or deposited. It also provides a guide to the locations and variability of benthic habitats.

Massachusetts Bay↗
USGS2012

Paleomagnetism of the Late Triassic Hound Island Volcanics: Revisited

The collision and accretion of the Alexander terrane profoundly influenced the geologic history of Alaska and western Canada; however, the terrane's displacement history is only poorly constrained by sparse paleomagnetic studies. We studied the paleomagnetism of the Hound Island Volcanics in order to evaluate the location of the Alexander terrane in Late Triassic time. We collected 618 samples at 102 sites in and near the Keku Strait, Alaska, from the Late Triassic Hound Island Volcanics, the Permian Pybus Formation, and 23-Ma gabbroic intrusions. We found three components of magnetization in the Hound Island Volcanics. The high-temperature component (component A) resides in hematite and magnetite and was found only in highly oxidized lava flows in a geographically restricted area. We think it is primary, or acquired soon after eruption of the lavas, principally because the directions pass a fold test. The paleolatitude indicated by this component (19.2° ± 10.3°) is similar to those determined for various portions of Wrangellia, consistent with the geologic interpretation that the Alexander terrane was with the Wrangellia terrane in Late Triassic time. We found two overprint directions in the Hound Island Volcanics. Component B was acquired 23 m.y. ago due to intrusion of gabbroic dikes and sills. This interpretation is indicated by the similarity of upper-hemisphere directions in the Hound Island Volcanics to those in the gabbro. Component C, found in both the Hound Island Volcanics and the Permian Pybus Formation, is oriented northeast and down, fails a regional fold test, and was acquired after regional deformation around 90 to 100 Ma. This overprint direction yields a paleolatitude similar to, but slightly higher than, slightly older rocks from the Coast Plutonic Complex, suggesting that the Alexander terrane was displaced 17° in early Late Cretaceous time. The occurrence of these two separate overprinting events provides a satisfying explanation of the earlier puzzling results from the Hound Island Volcanics (Hillhouse and Grommé, 1980). Finally, great-circle analysis of the paleomagnetic data from the Pybus Formation suggests the Alexander terrane may have been in the northern hemisphere in Permian time.

Alaska↗
USGS2015

Glaciological and marine geological controls on terminus dynamics of Hubbard Glacier, southeast Alaska

Hubbard Glacier, located in southeast Alaska, is the world's largest non-polar tidewater glacier. It has been steadily advancing since it was first mapped in 1895; occasionally, the advance creates an ice or sediment dam that blocks a tributary fjord (Russell Fiord). The sustained advance raises the probability of long-term closure in the near-future, which will strongly impact the ecosystem of Russell Fiord and the nearby community of Yakutat. Here, we examine a 43-year record of flow speeds and terminus position to understand the large-scale dynamics of Hubbard Glacier. Our long-term record shows that the rate of terminus advance has increased slightly since 1895, with the exception of a slowed advance between approximately 1972 and 1984. The short-lived closure events in 1986 and 2002 were not initiated by perturbations in ice velocity or environmental forcings, but were likely due to fluctuations in sedimentation patterns at the terminus. This study points to the significance of a coupled system where short-term velocity fluctuations and morainal shoal development control tidewater glacier terminus position.

Alaska↗
USGS2012

Geodetic measurement of crustal deformation on the San Andreas, Hayward, and Calaveras faults near San Francisco, California

Analysis of a geodetic network of 115 lines crossing the San Andreas, Hayward, and Calaveras faults in the vicinity of San Francisco Bay and measured repeatedly between 1970 and 1980 has revealed details about the accommodation of relative plate motion in this area. The most striking result is that the deformation is not uniformly distributed across the area. In the east bay, along the Hayward and Calaveras faults, all motion appears to take place as slip directly on the fault, with no accumulation of strain in the adjacent crust. On both the Calaveras and the Hayward faults the rate obtained for the 1970 to 1980 period agrees with geologic rates spanning a few million years and with creep rates spanning a few decades. The Hayward fault slip rate is 7 ± 1 mm/yr. The Calaveras fault slip rate is 7 ± 1 mm/yr, with perhaps half of this slip distributed across a zone a few kilometers wide, probably as inelastic deformation of weak near‐surface material. The absence of strain accumulation in the east bay is surprising since the Hayward and Calaveras faults have been the site of large earthquakes in the past. A block located east of the Calaveras fault and south of the Las Positas fault has been rotating clockwise at a rate of 0.3 ± 0.1 μrad/yr with very little internal deformation. Along the San Francisco peninsula no detectable slip occurs (less than 1.5 mm/yr) at the surface, but appreciable strain is accumulating. Near fault shear strain rates are 0.6 ± 0.1 μstrain/yr (engineering) with direction N47°W ± 9. The slip rate near the San Andreas fault is 12.2 ± 3.9 mm/yr distributed across a broad zone. The relative motion across the whole region during the period 1970–1980 is 32.1 ± 7.4 mm/yr.

California↗
USGS1954

U.S. Geological Survey Trace Elements and related reports through 1953

This report combines and brings up-to-date the information previously given in Trace Elements Investigations Report 325, "Numerical list of U.S. Geological Survey Trace Elements Reports to April 30, 1953," and Trace Elements Investigations Report 301, "Topical index and bibliography of U.S. Geological Survey Trace Elements and related reports." Part I is a numerical list of U.S. Geological Survey Trace Elements Investigations and Memorandum reports. It supersedes TEI-325. This part lists not only reports (followed by a date) that have been transmitted to the U.S. Atomic Energy Commission, but also reports in preparation (followed by an asterisk) for which tentative titles were available on December 31, 1953. Reports that have been published are indicated by the abbreviation of the medium of publication. (See also part II.) Part II is a reference guide to Trace Elements and related reports that are available to the public; this part supersedes Part 2 of the TEI-301 (published as Geological survey Circular 281). These reports are grouped according to the type of publication or release. Abstracts published in Nuclear Science Abstracts are not included in Part II, although certain TEI and TEM reports, the abstracts of which have been published in NSA, are so indicated in Part I. Publications in process on December 31, 1953, are designated by an asterisk. Part III is a finding list of states, areas, and subjects. It is based on information derived mostly from the titles of reports and, where titles are of a general nature, from a cursory review of the reports. This list is not a complete index of the information given in Trace Elements and related reports, but is designed to find subjects of major interest. Because of the numerous entries for Colorado and Utah, information has been listed by counties and, where possible, by subject under these states. Other states have county listings only if a county is included in the title of a report; otherwise, areas may be listed separately under the state. Major subjects are listed separately in the index and also where appropriate under states. Analytical methods and subjects related to analytical research are listed under Analytical Methods and Research, but not separately throughout the index. Most mineralogic studies are included under the heading Mineralogy, but are not necessarily listed according to location. Part IV is a finding list of authors. The words “with” and “and” are used to indicate seniority of authorship. For example, a listing of Jones and Brown indicates that Jones is the senior author. A listing of Jones with Brown indicates that Brown is the senior author. In both parts III and IV all Trace Elements reports are listed, as well as other related reports that have not been issued as Trace Elements reports. The following standard abbreviations have been used: TEI, Trace Elements Investigations report; TEM, Trace Elements Memorandum report; P, Professional Paper; B, Bulletin; C, Circular; J, Journal; OF, open file; TIS, Technical Information Service release; NSA, Nuclear Science Abstracts; QM, Quadrangle Map Series; and OM, Oil and Gas map or Mineral Investigations map or report.

Trace Elements Investigations↗
USGS2000

Geologic mapping of Europa

Galileo data enable the major geological units, structures, and surface features to be identified on Europa. These include five primary units (plains, chaos, band, ridge, and crater materials) and their subunits, along with various tectonic structures such as faults. Plains units are the most widespread. Ridged plains material spans a wide range of geological ages, including the oldest recognizable features on Europa, and appears to represent a style of tectonic resurfacing, rather than cryovolcanism. Smooth plains material typically embays other terrains and units, possibly as a type of fluid emplacement, and is among the youngest material units observed. At global scales, plains are typically mapped as undifferentiated plains material, although in some areas differences can be discerned in the near infrared which might be related to differences in ice grain size. Chaos material is composed of plains and other preexisting materials that have been severely disrupted by inferred internal activity; chaos is characterized by blocks of icy material set in a hummocky matrix. Band material is arrayed in linear, curvilinear, wedge-shaped, or cuspate zones with contrasting albedo and surface textures with respect to the surrounding terrain. Bilateral symmetry observed in some bands and the relationships with the surrounding units suggest that band material forms by the lithosphere fracturing, spreading apart, and infilling with material derived from the subsurface. Ridge material is mapped as a unit on local and some regional maps but shown with symbols at global scales. Ridge material includes single ridges, doublet ridges, and ridge complexes. Ridge materials are considered to represent tectonic processes, possibly accompanied by the extrusion or intrusion of subsurface materials, such as diapirs. The tectonic processes might be related to tidal flexing of the icy lithosphere on diurnal or longer timescales. Crater materials include various interior (smooth central, rough inner, and annular massif) and exterior (continuous ejecta) subunits. Structural features and landforms are shown with conventional symbols. Type localities for the units are identified, along with suggestions for portraying the features on geological maps, including colors and letter abbreviations for material units. Implementing these suggestions by the planetary mapping community would facilitate comparisons of maps for different parts of Europa and contribute to an eventual global synthesis of its complex geology. On the basis of initial mapping results, a stratigraphic sequence is suggested in which ridged plains form the oldest unit on Europa, followed by development of band material and individual ridges. Band materials tend to be somewhat older than ridges, but in many areas the two units formed simultaneously. Similarly, the formation of most chaos follows the development of ridged plains; although chaos is among the youngest materials on Europa, some chaos units might have formed contemporaneously with ridged plains. Smooth plains generally embay all other units and are late-stage in the evolution of the surface. C1 craters are superposed on ridged plains but are crosscut by other materials, including bands and ridges. Most c2 craters postdate all other units, but a few c2 craters are cut by ridge material. C3 craters constitute the youngest recognizable material on Europa. Copyright 2000 by the American Geophysical Union.

Journal of Geophysical Research E: Planets↗
USGS2024

Spatial distribution and diet of Lake Michigan juvenile lake trout

Most studies of Lake Michigan lake trout ( Salvelinus namaycush ) have focused on adults, with scant attention to juveniles (<400 mm). We explored the spatial distribution and diet of juvenile lake trout using U.S. Geological Survey September bottom trawl data (2015–2022) and stomach content information opportunistically collected since 2012 by various agencies using multiple gear types. Most juvenile lake trout in the September bottom trawl survey were caught at 37–64 m bottom depths. Length frequency data from the bottom trawl survey identified three size classes likely associated with wild juvenile lake trout age: < 85 mm (∼age-0), 85–170 mm (∼age-1) and > 170 mm (∼age-2+). Largest catches of wild lake trout < 170 mm occurred along a northeastern transect (near Frankfort, Michigan), whereas most > 170 mm were collected along southern transects. Mysis diluviana was the dominant prey for juvenile lake trout < 170 mm, and > 250 mm were primarily piscivorous, while 170–250 mm appeared to be a transitional period of switching from Mysis to fish. Species composition of prey fishes consumed by lake trout varied spatially and we found evidence of seasonal and annual diet variation within Grand Traverse Bay. Diporeia , once an important component of juvenile lake trout diet, appears to no longer be consumed by juvenile lake trout in Lake Michigan to any measurable degree. Continued research on the ecology of juvenile lake trout may provide insight into the effects of a changing ecosystem on juvenile lake trout diet and growth, thereby contributing to the effort to rehabilitate the Lake Michigan lake trout population.

Lake Michigan↗
USGS2011

A Web-Based Decision Support System for Assessing Regional Water-Quality Conditions and Management Actions

The U.S. Geological Survey National Water Quality Assessment Program has completed a number of water-quality prediction models for nitrogen and phosphorus for the conterminous United States as well as for regional areas of the nation. In addition to estimating water-quality conditions at unmonitored streams, the calibrated SPAtially Referenced Regressions On Watershed attributes (SPARROW) models can be used to produce estimates of yield, flow-weighted concentration, or load of constituents in water under various land-use condition, change, or resource management scenarios. A web-based decision support infrastructure has been developed to provide access to SPARROW simulation results on stream water-quality conditions and to offer sophisticated scenario testing capabilities for research and water-quality planning via a graphical user interface with familiar controls. The SPARROW decision support system (DSS) is delivered through a web browser over an Internet connection, making it widely accessible to the public in a format that allows users to easily display water-quality conditions and to describe, test, and share modeled scenarios of future conditions. SPARROW models currently supported by the DSS are based on the modified digital versions of the 1:500,000-scale River Reach File (RF1) and 1:100,000-scale National Hydrography Dataset (medium-resolution, NHDPlus) stream networks. ?? 2011 American Water Resources Association. This article is a U.S. Government work and is in the public domain in the USA.

Journal of the American Water Resources Associatio↗
USGS2019

Joint 3-D tomographic imaging of Vp, Vs and Vp/Vs and hypocenter relocation at Sinabung volcano, Indonesia from November to December 2013

We conducted travel time tomography using P- and S-wave arrival times of volcanic-tectonic (VT) events that occurred between November and December 2013 to determine the three-dimensional (3D) seismic velocity structure (Vp, Vs, and Vp/Vs) beneath Sinabung volcano, Indonesia in order to delineate geological subsurface structure and to enhance our understanding of the volcanism itself. This was a time period when phreatic explosions became phreatomagmatic and then magma migrated to the surface forming a summit lava dome. We used 4846 VT events with 16,138 P- and 16,138 S-wave arrival time phases recorded by 6 stations for the tomographic inversion. The relocated VTs collapse into three clusters at depths from the surface to sea level, from 2 to 4 km below sea level, and from 5 to 8.5 km below sea level. The tomographic inversion results show three prominent regions of high Vp/Vs (~ 1.8) beneath Sinabung volcano at depths consistent with the relocated earthquake clusters. We interpret these anomalies as intrusives associated with previous eruptions and possibly surrounding the magma conduit, which we cannot resolve with this study. One anomalous region might contain partial melt, at sea level and below the eventual eruption site at the summit. Our results are important for the interpretation of a conceptual model of the “plumbing system” of this hazardous volcano.

Sinabung Volcano↗
USGS2012

Active faulting and deformation of the Coalinga anticline as interpreted from three-dimensional velocity structure and seismicity

This work gives a clear picture of the geometry of aftershock seismicity in a large thrust earthquake. Interpretation of hypocenters and fault plane solutions, from the 1983 Coalinga, Coast Range California, earthquake sequence, in combination with the three-dimensional velocity structure shows that the active faulting beneath the fold primarily consists of a set of southwest dipping thrusts uplifting blocks of higher-velocity material. Above the main listric blind thrust there is a conjugate fault, steeply northeast dipping, that provides the western limit of the aftershocks within the Coalinga Anticline and that corresponds in location and spatial extent with the adjacent Pleasant Valley syncline. The character of the seismicity varies with the degree of previous deformation on each section of the anticline. Where the previous uplift was largest, the shallow seismicity shows secondary faulting on either side of the fold with orientations that correspond to the preexisting geologic structure. Diffuse seismicity characterizes the area with the least previous deformation. The mainshock rupture terminated where the fold trend was no longer uniform but had competing north and west trending features. The upward extent of the mainshock rupture ended at the approximate boundary between Franciscan and Great Valley Sequence rocks. Above that depth the main thrust appears to splay into a steeper segment and a near-horizontal segment. Thus the extent of rupture area is limited by the area of uniform structural orientation and by the variation in the type of material. With the three-dimensional velocity model each individual hypocenter moved slightly (0–2 km) in accord with the details of the surrounding velocity structure, so that secondary features in the seismicity pattern are more detailed than with a local one-dimensional model and station corrections. The overall character of the fault plane solutions was not altered by the three-dimensional model, but the more accurate ray paths did result in distinct changes. In particular, the mainshock has a fault plane dipping 30° southwest instead of the 23° obtained with the one-dimensional model.

Journal of Geophysical Research Solid Earth↗
USGS2017

Coastal eolian sand-ramp development related to paleo-sea-level changes during the Latest Pleistocene and Holocene (21–0 ka) in San Miguel Island, California, U.S.A.

Coastal eolian sand ramps (5–130 m elevation) on the northern slope (windward) side of the small San Miguel Island (13 km in W-E length) range in age from late Pleistocene to modern time, though a major hiatus in sand-ramp growth occurred during the early Holocene marine transgression (16–9 ka). The Holocene sand ramps (1–5 m measured thicknesses) currently lack large dune forms, thereby representing deflated erosional remnants, locally covering thicker late Pleistocene sand-ramp deposits. The ramp sand was initially supplied from the adjacent island-shelf platform, extending about 20 km north of the present coastline. The sand-ramp deposits and interbedded loess soils were 14 C dated using 112 samples from 32 archaeological sites and other geologic sections. Latest Pleistocene sand ramps (66–18 ka) were derived from across-shelf eolian sand transport during marine low stands. Shoreward wave transport supplied remobilized late Pleistocene sand from the inner shelf to Holocene beaches, where dominant NW winds supplied sand to the sand ramps. The onset dates of the sand-ramp deposition in San Miguel are 7.2 ± 1.5 ka (sample n = 14). The internal strata dates in the vertically accreting sand ramps are 3.4 ± 1.7 ka ( n = 34). The sand ramps in San Miguel show wide-scale termination of sand supply in the latest Holocene time. The sand-ramp top dates or burial dates are 1.7 ± 0.9 ka ( n = 28). The latest Holocene sand ramps are truncated along most of the island's northern coastline, indicating recent losses of nearshore sand reserves to onshore, alongshore, and, possibly, offshore sand sinks. The truncated sand ramps in San Miguel Island and in other sand-depleted marine coastlines provide warnings about future beach erosion and/or shoreline retreat from accelerated sea-level rise accompanying predicted global warming.

California↗
USGS2024

ShakeAlert® and schools: Incorporating earthquake early warning in school districts in Alaska, California, Oregon, and Washington

The U.S. Geological Survey-managed ShakeAlert® earthquake early warning system is the first public alerting system in the United States to provide rapid mass notification when an earthquake is detected. Although public alert delivery via mobile phones began in California in 2019 followed by Oregon and Washington in 2021, little is known about what might drive widespread implementation in at-risk institutional settings such as schools. For example, there has been limited research on how to best integrate earthquake early warning into existing emergency plans, alert systems, and drills to keep school children and personnel safe in an earthquake. To address this gap, in the spring of 2022, every school district superintendent in Alaska, California, Oregon, and Washington was sent a 15-min online survey. The survey assessed superintendent knowledge of ShakeAlert, preferences for alert messaging, and perceived opportunities and barriers to incorporating the system in schools. The results showed that superintendents had low awareness of ShakeAlert but held positive perceptions of the system's potential to enable life-saving protective actions. A major barrier to adoption included the perceived financial cost of implementing and maintaining the system. There were some statistically significant differences in state responses, and future research could investigate the specific needs of each state based on school district size and composition, hazard exposure, and earthquake experience. Together these findings can help inform targeted strategies to increase ShakeAlert adoption in schools and ultimately improve the safety of school children and staff during earthquakes.

Alaska, California, Oregon, Washington↗
USGS2000

A review of the geologic framework of the Long Island Sound Basin, with some observations relating to postglacial sedimentation

Most of the papers in this thematic section present regional perspectives that build on more than 100 years of geologic investigation in Long Island Sound. When viewed collectively, a common theme emerges in these works. The major geologic components of the Long Island Sound basin (bedrock, buried coastal-plain strata, recessional moraines, glacial-lake deposits, and the remains of a large marine delta) interact with the water body to affect the way the modern sedimentary system functions. Previous work, along with our present knowledge of the geologic framework of the Long Island Sound basin, is comprehensively reviewed with this theme in mind. Aspects of the crystalline bedrock, and the deltaic deposits associated with glacial Lake Connecticut, are examined with respect to their influence on sedimentation along the Connecticut coast and in the northern and western Sound. We also discuss the influence of the glacial drift that mantles the coastal-plain remnant along the north shore of Long Island and in the southern Sound. A total of approximately 22.7 billion m 3 of marine sediment has accumulated in the Long Island Sound basin. A significant portion (44%) of the fine-grained marine section in the central and western basins was redistributed there from the eastern Sound, as tidal scour removed slightly over 5 billion m 3 (5.3 X 10 12 kg) of fine material from glacial lake and early-marine deposits east of the Connecticut River. The remainder of the estimated 1.2 X 10 13 kg of fine-grained marine sediment that now resides in the central and western Sound can be accounted for by riverine input over the past 13.5 ka.

Connecticut, New York↗
USGS2022

Great expectations for earthquake early warnings on the United States West Coast

In October 2019, California became the first state in the United States to fully activate a public earthquake early warning system—ShakeAlert®—managed by the U.S. Geological Survey. The system was subsequently rolled out in March 2021 in Oregon and May 2021 in Washington. Earthquake early warning (EEW) systems can provide seconds of notice to people and technological systems that shaking is imminent, but their effectiveness depends on recipients’ expectations and actions as well as technical performance. To better understand these dependencies, we surveyed representative samples of adults in California (N = 1219), Oregon (N = 1020), and Washington (N = 1037) in February 2021. Most respondents had experienced earthquakes, but few had lived through violent shaking; most had not followed protective action guidance to Drop, Cover, and Hold On (DCHO) in earthquakes; and most reported no personal or social harm from prior earthquakes. Nevertheless, expectations and perceived usefulness of EEW were high, and higher still for those who expected alerts to be accurate and easy to use, expressed tolerance of missed and erroneous warnings, and expected to be affected by a damaging earthquake in their lifetime. Results suggest opportunities to better align public preferences and expectations with ShakeAlert operations. For example, some respondents preferred lower alerting thresholds than those proposed by government and scientists. Moreover, reported tolerance of warning errors was widespread, but respondents wanted explanations quickly, suggesting a need to further develop post-alert messaging. Findings from this study should be informative for future research on the co-evolution of experiences and expectations with EEW systems.

California, Oregon, Washington↗