Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Facies”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55Linked to original sources
USGS1991

Geohydrologic units of the Mississippi embayment and Texas coastal uplands aquifer systems, south-central United States

As part of the U.S. Geological Survey's Regional Aquifer-System Analysis (RASA) program, the Gulf Coast RASA was initiated to investigate all Tertiary and Quaternary aquifers underlying the Coastal Plain in the south-central United States. Geohydrologic units that make up two of the three regional aquifer systems Mississippi embayment and Texas coastal uplands in the area are described in this report. The gulfward boundary of the outcrop of the two aquifer systems is the southernmost outcrop or subcrop of the Vicksburg-Jackson confining unit, and the updip boundary is the contact between Cretaceous and Tertiary deposits, extending northward to the southern tip of Illinois. The uppermost Cretaceous aquifer, the McNairy-Nacatoch aquifer in the northern part of the Mississippi embayment, is also included where it may be hydraulically connected to the younger sediments. Major regional geohydrologic units generally are coincident with previously defined geologic units. Most of the geohydrologic units consist of alternating sand and clay; however, the entire sequence becomes a clay and carbonate facies gulfward. The regional geohydrologic units delineated in this study, from youngest to oldest, are (1) Mississippi River Valley alluvial aquifer, (2) Vicksburg-Jackson confining unit, (3) upper Claiborne aquifer, (4) middle Claiborne confining unit, (5) middle Claiborne aquifer, (6) lower Claiborne confining unit, (7) lower Claiborne-upper Wilcox aquifer, (8) middle Wilcox aquifer, (9) lower Wilcox aquifer, (10) Midway confining unit, and (11) McNairy-Nacatoch aquifer. The Mississippi embayment aquifer system contains all of these units and has a maximum thickness of about 5,000 feet. The Texas coastal uplands aquifer system, which is contiguous with the Mississippi embayment aquifer system and extends westward and southwestward from the Sabinc uplift, contains all of the foregoing geohydrologic units except the Mississippi River Valley alluvial aquifer, the lower Wilcox aquifer, and the McNairy-Nacatoch aquifer. The Texas coastal uplands aquifer system has a maximum thickness of about 7,000 feet.

Alabama, Arkansas, Illinois, Kentucky, Louisiana, ↗
USGS2000

Regional ground-water flow and geochemistry in the midwestern Basins and Arches aquifer system in parts of Indiana, Ohio, Michigan, and Illinois

This report synthesizes information on the regional ground-water flow and geochemistry in the Midwestern Basins and Arches aquifer system in parts of Indiana, Ohio, Michigan, and Illinois. Aquifers that compose this water-table aquifer system include glacial aquifers and an underlying, areally extensive carbonate-rock aquifer. Water within the aquifers is most commonly a Ca-Mg-HCO 3 type or a Ca-Mg-SO 4 type. In general, the distribution of hydrochemical facies within the aquifer system is controlled by the mineralogy of the aquifer material, rather than by a chemical evolution of water along general directions of regional ground-water flow. Some ground-water flow systems within the aquifer system provide base flow to streams in response to ground-water recharge events. Other (often deeper) ground-water flow systems respond minimally to variations in ground-water recharge from precipitation and provide a fairly constant supply of water to streams. Streamflow hydrographs and base-flow duration curves were used to estimate such components of base flow in selected streams for long-term steady-state conditions in the aquifer system. Mean sustained ground-water discharge (discharge from fairly stable ground-water flow systems) ranges from 3 to 50 percent of mean ground-water discharge (discharge from all ground-water flow systems) to the selected stream reaches. These percentages indicate that 50 to 97 percent of base flow in the streams within the study area can be attributed to transient ground-water flow systems, which typically have a major component of local-scale flow. Because ground-water flow across the external boundaries of the aquifer system is minimal, such percentages indicate that most ground-water flow in the aquifer system is associated with seasonally transient local flow systems. Results of a ground-water flow model that was calibrated by use of regression methods and that simulates regional flow systems within the aquifer system (approximately 10 percent of total ground-water flow in the aquifer system) indicate that most water (99 percent) in simulated regional flow systems is from recharge at the water table. Most water (78 percent) discharges from simulated regional flow systems to the principal streams. Less than 3 percent of water in simulated regional flow systems discharges to the Ohio River, Lake Erie, or downdip areas in the Illinois (structural) Basin. Simulations also indicate that most of the Midwestern Basins and Arches aquifer system is characterized by alternating regional recharge and discharge areas at intervals of less than every 10 miles along the dominant regional trends of the potentiometric surfaces in the aquifers. Such alternating regional recharge and discharge areas result in the absence of long flow paths from the very highest regional potentiometric levels to the very lowest regional potentiometric levels. The presence of tritiated ground water (less than 50 years old) across most of the aquifer system also indicates that the aquifer system receives recharge across most of the study area. The northeastern part of the aquifer system near Lake Erie differs from the rest of the system with respect to regional ground-water flow and chemistry. Specifically, part of the northeastern part of the aquifer system can be characterized as a broad area (tens of miles) of weak regional discharge (less than 0.5 inch per year). Results of the regional ground-water flow model indicate that regional flow systems have a limited ability to carry ground water away from this area; thus precipitation is prevented from recharging the regional flow systems in this part of the aquifer system. Some ground water recharged during Pleistocene glaciation was found in this area.

Illinois, Indiana, Michigan, Ohio↗
USGS1991

The Cenozoic evolution of the San Joaquin Valley, California

The San Joaquin Valley, which is the southern part of the 700-km-long Great Valley of California, is an asymmetric structural trough that is filled with a prism of upper Mesozoic and Cenozoic sediments up to 9 km thick; these sediments rest on crystalline basement rocks of the southwestward-tilted Sierran block. The San Joaquin sedimentary basin is separated from the Sacramento basin to the north by the buried Stockton arch and associated Stockton fault. The buried Bakersfield arch near the south end of the valley separates the small Maricopa-Tejon subbasin at the south end of the San Joaquin basin from the remainder of the basin. Cenozoic strata in the San Joaquin basin thicken southeastward from about 800 m in the north to over 9,000 m in the south. The San Joaquin Valley can be subdivided into five regions on the basis of differing structural style. They are the northern Sierran block, the southern Sierran block, the northern Diablo homocline, the westside fold belt, and the combined Maricopa-Tejon subbasin and southmargin deformed belt. Considerable facies variation existed within the sedimentary basin, particularly in the Neogene when a thick section of marine sediment accumulated in the southern part of the basin, while a relatively thin and entirely nonmarine section was deposited in the northern part. The northern Sierran block, the stable east limb of the valley syncline between the Stockton fault and the San Joaquin River, is the least deformed region of the valley. Deformation consists mostly of a southwest tilt and only minor late Cenozoic normal faulting. The southern Sierran block, the stable east limb of the valley syncline between the San Joaquin River and the Bakersfield arch, is similar in style to the northern part of the block, but it has a higher degree of deformation. Miocene or older normal faults trend mostly north to northwest and have a net down-to-the-west displacement with individual offsets of as much as 600 m. The northern Diablo homocline, the western limb of the valley syncline between the Stockton arch and Panoche Creek, consists of a locally faulted homocline with northeast dips. Deformation is mostly late Cenozoic, is complex in its history, and has included up-to-the-southwest reverse faulting. The west-side fold belt, the southwestern part of the valley syncline between Panoche Creek and Elk Hills and including the southern Diablo and Temblor Ranges, is characterized by a series of folds and faults trending slightly oblique to the San Andreas fault. Paleogene folding took place in the northern part of the belt; however, most folding took place in Neogene time, during which the intensity of deformation increased southeastward along the belt and southwestward toward the San Andreas fault. The Maricopa-Tejon subbasin and the south-margin deformed belt are structurally distinct, but genetically related, regions bounded by the Bakersfield arch on the north, the San Emigdio Mountains on the south, the Tehachapi Mountains on the east, and the southeast end of the fold belt on the west. This combined region, which is the most deformed part of the basin, has undergone significant late Cenozoic shortening through north-directed thrust faulting at the south margin, as well as extreme Neogene basin subsidence north of the thrust belt. The sedimentary history of the San Joaquin basin, recorded in terms of unconformity-bounded depositional sequences, has been controlled principally by tectonism, but it has also been controlled by eustatic sea-level changes and, to a lesser degree, by climate. Plate tectonic events that had an influence on the basin include (1) subduction during the early Tertiary that changed from oblique to normal convergence in the later part of the Eocene, (2) the mid-Oligocene encounter of the Pacific-Farallon spreading ridge with the trench, and the consequent establishment of the San Andreas transform, (3) the northwestward migration of the Mendocino triple junction that in

Professional Paper↗
USGS1994

Early Paleozoic alkalic and calc-alkalic plutonism and associated contact metamorphism, central Virginia Piedmont

Early Paleozoic plutonism in the central Virginia Piedmont consists of the igneous Lahore Complex and Ellisville Pluton. The Lahore Complex consists of a small altered mafic pluton intruded by the shoshonitic, alkalic monzonites of the Lahore Pluton (-450 Ma) that, in turn, is intruded by the calc-alkaline, granodioritic Ellisville Pluton (-440 Ma). These plutons were emplaced at about 760aC at a depth of 12 to 18 km within greenschist-facies rocks and are enclosed by contact-metamorphosed rocks.

Virginia↗
USGS1998

The brachiopod Antiquatonia coloradoensis (Girty) from the upper Morrowan and Atokan (lower Middle Pennsylvanian) of the United States

The productid brachiopod Antiquatonia coloradoensis occurs commonly in lower Middle Pennsylvanian rocks representing open-bay, shelf-lagoon, and shelf-margin marine facies and extending from the Eastern Great Basin, through the Southern Rocky Mountains, southern and central Midcontinent, to the southern and eastern Appalachian Basin. This study demonstrates that Antiquatonia coloradoenesis is biostratigraphically diagnostic with a temporal range of late Morrowan through Atokan. Its ancestor was A. morrowensis (Mather) and its descendant was A. hermosana (Girty).

Professional Paper↗
USGS2000

Geologic studies in Alaska by the U.S. Geological Survey, 1997

The eight papers that follow continue the series of U.S. Geological Survey (USGS) reports on investigations in the geologic sciences in Alaska. The series presents new and sometimes preliminary findings that are of interest to earth scientists in academia, government, and industry; to land and resource managers; and to the general public. Reports presented in Geologic Studies in Alaska cover a broad spectrum of topics from all parts of the State (fig. 1), which serves to emphasize the diversity of USGS efforts to meet the Nation's needs for earth-science information in Alaska. The papers in this volume are organized under the topics Resources, Geologic Framework, and Environment and Climate. Such an organization is intended to reflect the scope and objectives of USGS programs currently active in Alaska. Resource papers include one that presents detailed observations from a Mississippian Zn-Pb-Cu-Ag occurrence in the Brooks Range (Werdon). Mineralogic, chemical, and isotopic data provide the basis for a proposed relationship between this vein-breccia deposit and the shale-hosted massive sulfide deposit type, which includes the active Red Dog mine in the western Brooks Range. Also included under the topic of Resources is a paper that presents geochemical and isotopic data from the Greens Creek and Woewodski Island volcanogenic massive sulfide deposits in southeastern Alaska (Newberry and Brew). The depositional environment and sedimentological setting of Tertiary coal beds in the Matanuska and Susitna Valleys is the focus of a third paper under the topic of Resources (Flores and others). Geologic Framework studies provide background information that is the scientific basis for present and future studies of the environment, mineral and energy resources, paleoclimate, and hazards in Alaska. One paper presents the results of sedimentologic and paleontologic comparisons of lower Paleozoic, deep-water-facies rock units in central Alaska (Dumoulin and others). The authors show which of these units are likely to correlate with one another, suggest likely source regions, and provide a structural restoration of units that have been fragmented by large fault motions. A second framework paper provides a map, rock descriptions, and chemical compositions of volcanic rocks in a newly recognized, geologically young volcanic center in the Aleutian volcanic arc (Hildreth and others). A third paper presents an interesting summary of gravity changes that occurred in south-central Alaska during the great earthquake of 1964 and for the following 25 years (Barnes). Gravity changes correlate with land-elevation changes in some cases, but not in others, which means that different processes are responsible for the gravity changes.

Alaska↗
USGS2001

Origin, extent, and thickness of quaternary geologic units in the Willamette Valley, Oregon

Stratigraphic and chronologic information collected for Quaternary deposits in the Willamette Valley, Oregon, provides a revised stratigraphic framework that serves as a basis for a 1:250,000-scale map, as well as for thickness estimates of widespread Quaternary geologic units. We have mapped 11 separate Quaternary units that are differentiated on the basis of stratigraphic, topographic, pedogenic, and hydrogeologic properties. In summation, these units reflect four distinct episodes in the Quaternary geologic development of the Willamette Valley: 1) Fluvial sands and gravels that underlie terraces flanking lowland margins and tributary valleys were probably deposited between 2.5 and 0.5 million years ago. They are the oldest widespread surficial Quaternary deposits in the valley. Their present positions and preservation are undoubtedly due to postdepositional tectonic deformation - either by direct tectonic uplift of valley margins, or by regional tectonic controls on local base level. 2) Tertiary and Quaternary excavation or tectonic lowering of the Willamette Valley accommodated as much as 500 m (meters) of lacustrine and fluvial fill. Beneath the lowland floor, much of the upper 10 to 50 m of fill is Quaternary sand and gravel deposited by braided channel systems in subhorizontal sheets 2 to 10 m thick. These deposits grade to gravel fans 40 to 100 m thick where major Cascade Range rivers enter the valley and are traced farther upstream as much thinner valley trains of coarse gravel. The sand and gravel deposits have ages that range from greater than 420,000 to about 12,000 years old. A widely distributed layer of sand and gravel deposited at about 12 ka (kiloannum, thousands of years before the present) is looser and probably more permeable than older sand and gravel. Stratigraphic exposures and drillers' logs indicate that this late Pleistocene unit is mostly between 5 and 20 m thick where it has not been subsequently eroded by the Willamette River and its major tributaries. 3) Between 15,000 and 12,700 years ago, dozens of floods from Glacial Lake Missoula flowed up the Willamette Valley from the Columbia River, depositing up to 35 m of gravel, sand, silt, and clay. 4) Subsequent to 12,000 years ago, Willamette River sediment and flow regimes changed significantly: the Pleistocene braided river systems that had formed vast plains of sand and gravel evolved to incised and meandering rivers that are constructing today's fine-grained floodplains and gravelly channel deposits. Sub-surface channel facies of this unit are loose and unconsolidated and are highly permeable zones of substantial groundwater flow that is likely to be well connected to surface flow in the Willamette River and major tributaries. Stratigraphic exposures and drillers' logs indicate that this unit is mostly between 5 and 15 m thick.

Oregon↗
USGS2001

Geology, geochronology, geochemistry, and Pb-isotopic compositions of Proterozoic rocks, Poachie region, west-central Arizona — A study of the east boundary of the Proterozoic Mojave crustal province

The Poachie region at the south edge of the Colorado Plateau transition zone in western Arizona is underlain by early and middle Proterozoic plutonic rocks locally separated by screens of amphibolite-facies early Proterozoic metamorphic rocks and is in the eastern part of the Mojave crustal province, as shown by 35 Pb-isotope analyses of rocks and feldspars. Previously published mapping, 10 U-Pb zircon ages, 55 rock analyses, and other studies in the larger region of the transition zone lead to interpretation of the history and origin of the Proterozoic crust.

Arizona↗
USGS2014

The geochemistry of oils and gases from the Cumberland overthrust sheet in Virginia and Tennessee

This study presents high-resolution gas chromatograms of oils and molecular and isotopic analyses of oil-associated gases from 17 wells producing in the Upper Cambrian to Lower Ordovician Knox Group, the Middle and Upper Ordovician Stones River Group, and the Upper Ordovician Trenton Limestone in the Cumberland overthrust sheet. The wells are located in the Ben Hur and Rose Hill fields in Lee County, Va., and in the Swan Creek field in Hancock and Claiborne Counties, Tenn. They produce oils typical of those from source rocks that are rich in Gloeocapsomorpha prisca ( G. prisca ) (Assemblage A-type kerogen). The Rose Hill oils appear to come from a source that contains a higher proportion of Assemblage A-type kerogen than the Ben Hur and Swan Creek oils. Extrapolation of the δ 13 C compositions of oil-associated gases to possible kerogen compositions gives estimates of -23 to -24 per mil within the range of isotopic compositions of known G. prisca source material. Gases produced from the Knox Group wells in the Swan Creek field are different from those in the Middle and Upper Ordovician reservoirs and come from a source with a broader range of isotopic values. Trends in isotopic and gasoline-range compositional parameters of the oils and associated gas isotopic and molecular compositions are most likely influenced by changes in local source depositional facies.

Kentucky, Tennessee, Virginia↗
USGS2005

Sedimentology and sequence stratigraphy of the Cretaceous Nanushuk, Seabee, and Tuluvak formations exposed on Umiat Mountain, north-central Alaska

Upper Cretaceous strata of the upper part of the Nanushuk Formation, the Seabee Formation, and the lower part of the Tuluvak Formation are exposed along the Colville River on the east flank of Umiat Mountain in north-central Alaska. The Ninuluk sandstone, which is the uppermost unit of the Nanushuk Formation, displays a vertical succession of facies indicative of deposition in an upward-deepening estuarine through shoreface setting. A marine-flooding surface lies between the Ninuluk sandstone and organic-rich shale of the basal part of the Seabee Formation. The Ninuluk sandstone and the lower part of the Seabee Formation are interpreted as components of a transgressive-systems tract. The lowest, well-exposed strata in the Seabee Formation are a succession of shoreface sandstone beds in the middle of the formation. Integration of outcrop information and the Umiat No. 11 well log suggests that this sandstone succession rests on a sequence boundary and is capped by a marine-flooding surface. The sandstone succession is interpreted as a lowstand-systems tract. The upper part of the Seabee Formation includes a thick interval of organic-rich shale deposited in a dysaerobic offshore environment, and the gradational Seabee-Tuluvak contact is a coarsening-upward shale-to-sandstone succession deposited in a prodelta/delta-front environment. The observation that the upper part of the Seabee Formation correlates with seismic clinoforms suggests that dysaerobic conditions extended well up onto the prodelta slope during intervals of transgression and highstand. Correlation of the Umiat Mountain outcrop section with well logs and seismic data suggests that sequence boundaries and lowstand shoreface deposits may be common in the Seabee Formation and that wave action may have been important in transporting sand to the paleoshelf margin. These conclusions may contribute to an enhanced understanding of sand distribution in prospective lowstand turbidite deposits in the subsurface of the central North Slope of Alaska.

Professional Paper↗
USGS2005

Thermobarometric constraints on mid-Cretaceous to late Cretaceous metamorphic events in the western metamorphic belt of the Coast Mountains complex near Petersburg, southeastern Alaska

The western metamorphic belt is part of the Coast Mountains Complex of southeastern Alaska and western Canada. This complex formed as a result of mid-Cretaceous through middle Eocene crustal shortening between the previously amalgamated Wrangellia and Alexander terranes (Insular superterrane) and previously accreted terranes of the North American continental margin (Intermontane superterrane). The western metamorphic belt, which ranges from a few kilometers to several tens of kilometers in width, records a complex sequence of contact-metamorphic and regional metamorphic events, the most significant of which are designated M1R, M2C-R, and M3R. The M1R regional metamorphic event ranged in grade from subgreenschist to greenschist facies and was overprinted by the M2C-R and M3R metamorphic events. The M2C-R metamorphic event is recorded in discrete contact-metamorphic aureoles and regional metamorphic-mineral assemblages related to tonalite-granodiorite plutons of the Admiralty-Revillagigedo plutonic belt. The M3R metamorphic belt, which is adjacent to the M2C-R belt, is characterized by regional Barrovian isograds of garnet, staurolite, kyanite, and sillimanite. Using the THERMOCALC program, pressure-temperature (P-T) conditions for the M2C-R metamorphic event are estimated to be in the ranges 5.3-7.5 kbars and 525-640 deg.C and for the M3R metamorphic event in the ranges 9.4-12.6 kbars and 730-895 deg.C. The M2C-R metamorphic event occurred at approximately 90 Ma, but the timing of the M3R metamorphic event is poorly documented and uncertain. On the basis of an 40Ar/39Ar age on actinolitic amphibole and a Sm-Nd age on garnet core, the timing of metamorphism might be constrained between 90+/-1 and 80+/-9 Ma, although the Sm-Nd age of 80+/-9 m.y. possibly reflects postpeak growth. Thermobarometric data suggest that the two events occurred at different crustal levels and followed different P-T paths. No evidence exists that M2C-R metamorphic-mineral assemblages were overprinted by the M3R metamorphic event, as proposed by some workers. Juxtaposition of the two belts of rocks probably occurred along the Coast shear zone during uplift and exhumation of the Coast Mountains.

Professional Paper↗
USGS2008

Miocene Total Petroleum System -- Southeast Stable Shelf Assessment Unit of the San Joaquin Basin Province: Chapter 13 in Petroleum systems and geologic assessment of oil and gas in the San Joaquin Basin Province, California

The confirmed stratigraphic and structural-stratigraphic Southeast Stable Shelf Assessment Unit (AU) of the Miocene Total Petroleum System (San Joaquin Basin Province) comprises all hydrocarbon accumulations within the geographic limits of the AU. Traps typically display low dip angles, gentle folds, and normal faults. Reservoirs, which range in age from fractured Mesozoic basement rocks to Holocene nonmarine rocks, are mainly Oligocene to Miocene sandstones from the uppermost slope and adjacent shelf of the San Joaquin Basin, shallow marine shelf sandstones mainly of Miocene age, and nonmarine sandstones and conglomerates mostly of Pliocene- Pleistocene age. Faults have relatively small vertical displacements. Map boundaries of the assessment unit are shown in figures 13.1 and 13.2; this assessment unit replaces the Southeast Stable Shelf play 1002 considered by the U.S. Geological Survey (USGS) in its 1995 National Assessment (Beyer, 1996). Stratigraphically, the AU extends from the uppermost crystalline basement to the topographic surface (fig. 13.3). The AU is bounded on the west by the approximate location of the shelfslope break of the San Joaquin Basin in late Miocene time, thus excluding reservoirs in the deep-water Stevens sand of Eckis (1940). The eastern boundary of the AU is the edge of onlap of Neogene sedimentary sequences on crystalline basement rocks of the Sierra Nevada. The northern AU boundary is placed at the approximate northern extent of oils in shelf-facies reservoirs known to be sourced by the Miocene Total Petroleum System. This northern boundary explicitly excludes the Deer Creek and Jasmin fields, which were included in the corresponding earlier (1995) USGS play (Beyer, 1996), but which are now known to contain oil generated from Eocene source rocks. The White Wolf Fault bounds the AU on the south.

California↗
USGS2007

Middle Tertiary stratigraphic sequences of the San Joaquin Basin, California

An integrated database of outcrop studies, borehole logs, and seismic-reflection profiles is used to divide Eocene through Miocene strata of the central and southern San Joaquin Basin, California, into a framework of nine stratigraphic sequences. These third- and higher-order sequences (<3 m.y. duration) comprise the principal intervals for petroleum assessment for the basin, including key reservoir and source rock intervals. Important characteristics of each sequence are discussed, including distribution and stratigraphic relationships, sedimentary facies, regional correlation, and age relations. This higher-order stratigraphic packaging represents relatively short-term fluctuations in various forcing factors including climatic effects, changes in sediment supply, local and regional tectonism, and fluctuations in global eustatic sea level. These stratigraphic packages occur within the context of second-order stratigraphic megasequences, which mainly reflect long-term tectonic basin evolution. Despite more than a century of petroleum exploration in the San Joaquin Basin, many uncertainties remain regarding the age, correlation, and origin of the third- and higher-order sequences. Nevertheless, a sequence stratigraphic approach allows definition of key intervals based on genetic affinity rather than purely lithostratigraphic relationships, and thus is useful for reconstructing the multiphase history of this basin, as well as understanding its petroleum systems.

California↗
USGS2013

The three-dimensional geologic model used for the 2003 National Oil and Gas Assessment of the San Joaquin Basin Province, California: Chapter 7 in Petroleum systems and geologic assessment of oil and gas in the San Joaquin Basin Province, California

We present a three-dimensional geologic model of the San Joaquin Basin (SJB) that may be the first compilation of subsurface data spanning the entire basin. The model volume spans 200 × 90 miles, oriented along the basin axis, and extends to ~11 miles depth, for a total of more than 1 million grid nodes. This model supported the 2003 U.S. Geological Survey assessment of future additions to reserves of oil and gas in the SJB. Data sources include well-top picks from more than 3,200 wildcat and production wells, published cross sections, regional seismic grids, and fault maps. The model consists of 15 chronostratigraphic horizons ranging from the Mesozoic crystalline basement to the topographic surface. Many of the model units are hydrocarbon reservoir rocks and three—the Cretaceous Moreno Formation, the Eocene Kreyenhagen Formation, and the Miocene Monterey Formation—are hydrocarbon source rocks. The White Wolf Fault near the southern end of the basin divides the map volume into 2 separate fault blocks. The construction of a three-dimensional model of the entire SJB encountered many challenges, including complex and inconsistent stratigraphic nomenclature, significant facies changes across and along the basin axis, time-transgressive formation tops, uncertain correlation of outcrops with their subsurface equivalents, and contradictory formation top data. Although some areas of the model are better resolved than others, the model facilitated the 2003 resource assessment in several ways, including forming the basis of a petroleum system model and allowing a precise definition of assessment unit volumes.

California↗
USGS2008

The Gogebic Iron Range — A sample of the northern margin of the Penokean fold and thrust belt

The Gogebic iron range is an elongate belt of Paleoproterozoic strata extending from the west shore of Lake Gogebic in the upper peninsula of Michigan for about 125 km westward into northern Wisconsin. It is one of six major informally named iron ranges in the Lake Superior region and produced about 325 million tons of direct-shipping ore between 1887 and 1967. A significant resource of concentrating-grade ore remains in the western and eastern parts of the range. The iron range forms a broad, gently southward-opening arc where the central part of the range exposes rocks that were deposited somewhat north of the eastern and western parts. A fundamental boundary marking both the tectonic setting of deposition and the later deformation within the Penokean orogen lies fortuitously in an east-west direction along the range so that the central part of the range preserves sediments deposited north of that boundary, whereas the eastern and western parts of the range were deposited south of the boundary. Thus, the central part of the range provides a record of sedimentation and very mild deformation in a part of the Penokean orogen farthest from the interior of the orogen to the south. The eastern and western parts of the range, in contrast, exhibit a depositional and deformational style typical of parts closer to the interior of the orogen. A second fortuitous feature of the iron range is that the entire area was tilted from 40° to 90° northward by Mesoproterozoic deformation so that the map view offers an oblique cross section of the Paleoproterozoic sedimentary sequence and structures. Together, these features make the Gogebic iron range a unique area in which to observe (1) the lateral transition from deposition on a stable platform to deposition in a tectonically and volcanically active region, and (2) the transition from essentially undeformed Paleoproterozoic strata to their folded and faulted equivalents. Paleoproterozoic strata in the Gogebic iron range are part of the Marquette Range Supergroup. They were deposited unconformably on Neoarchean rocks consisting of a diverse volcanic suite (the Ramsay Formation) which was intruded by granitic rocks of the Puritan Quartz Monzonite. The Marquette Range Supergroup in this region consists of a basal sequence of orthoquartzite (Sunday Quartzite) and dolomite (Bad River Dolomite), both of which are part of the Chocolay Group. The group is preserved only in the eastern and western parts of the range but was probably present throughout before the erosion interval that separated it from the overlying Menominee Group. The Menominee Group consists of basal clastic rocks (Palms Formation) that grade upward into the Ironwood Iron-Formation, which is the principal iron-bearing unit of the range. The Ironwood interfingers with the Emperor Volcanic Complex in the eastern part of the range and with volcanic rocks and gabbro in the western part of the range. The Ironwood is overlain unconformably by the Tyler Formation in the central and western parts of the range and by the Tyler’s equivalent, the Copps Formation, in the eastern part of the range. Strata in the central part of the iron range are entirely sedimentary. Deposition occurred in a relatively stable tectonic setting, at least until the deposition of the Tyler Formation. The Tyler consists largely of turbidites deposited in a foreland basin in advance of accreting volcanic arcs to the south. Penokean deformation in the central part of the range was very minor; the evidence of deformation consists of steep faults with small offsets and a few bedding-parallel faults that also have small offsets and that are recognized only in mine workings. In both the eastern and western parts of the iron range, abrupt facies changes mark a passage into a more tectonically and volcanically active belt. These relationships are especially well displayed in the east where a graben, the Presque Isle trough, began to subside during deposition of the Ironwood Iron-Formation. The thickness of the Ironwood increases into the graben and its internal stratigraphy also changes. The most prominent changes in the graben are the presence of a thick volcanic unit, the Emperor Volcanic Complex of the Menominee Group, and comagmatic gabbro sills that interfinger with the Ironwood. In the western part of the range, volcanic rocks and comagmatic gabbro sills are also present in the Ironwood, but a graben that is equivalent to the Presque Isle trough is not evident. Penokean structures are well developed in both the eastern and western parts of the iron range. They consist of folds ranging from outcrop to regional scale and thrust faults which, in places, either repeated the section or detached it from Neoarchean basement. The sharp transition from the little-deformed central part of the range to the more intensely deformed eastern and western parts coincides closely with the earlier developed transition from the stable sedimentary setting in the central part to the tectonically active sedimentation in the east and west parts. The extensional structures that formed during sedimentation may have helped to control the extent of later Penokean compressional structures.

Michigan, Wisconsin↗
USGS2008

Lithofacies, Age, and Sequence Stratigraphy of the Carboniferous Lisburne Group in the Skimo Creek Area, Central Brooks Range

The Lisburne Group, a mainly Carboniferous carbonate succession that is widely distributed across northern Alaska, contains notable amounts of oil and gas at Prudhoe Bay. Detailed studies of the Lisburne in the Skimo Creek area, central Brooks Range, delineate its lithofacies, age, conodont biofacies, depositional environments, and sequence stratigraphy and provide new data on its hydrocarbon source-rock and reservoir potential, as well as its thermal history, in this area. We have studied the Lisburne Group in two thrust sheets of the Endicott Mountains allochthon, herein called the Skimo and Tiglukpuk thrust sheets. The southern, Skimo Creek section, which is >900 m thick, is composed largely of even-bedded to nodular lime mudstone and wackestone intercalated with intervals of thin- to thick-bedded bioclastic packstone and grainstone. Some parts of the section are partially to completely dolomitized and (or) replaced by chert. A distinctive, 30-m-thick zone of black, organic-rich shale, lime mudstone, and phosphorite is exposed 170 m below the top of the Lisburne. The uppermost 40 m of section is also distinctive and made up of dark shale, lime mudstone, spiculite, and glauconitic grainstone. The northern, Tiglukpuk Creek section, which is similar to the Skimo Creek section but only ~760 m thick, includes more packstone and grainstone and less organic-rich shale. Analyses of conodonts and foraminifers indicate that both sections range in age from late Early Mississippian (Osagean) through Early Pennsylvanian (early Morrowan) and document a hiatus of at least 15 m.y. at the contact between the Lisburne and the overlying Siksikpuk Formation. No evidence of subaerial exposure was observed along this contact, which may represent a submarine erosional surface. Lithofacies and biofacies imply that the Lisburne Group in the study area was deposited mainly in midramp to outer-ramp settings. Deepest water strata are mud rich and formed below storm or fair-weather wave base on the outer ramp to outer midramp; shallowest facies are storm, sand-wave, and shoal deposits of the inner midramp to inner ramp. A relatively diverse, open-marine fauna occurs throughout much of the Lisburne in the study area, but some beds also contain clasts typical of more restricted, shallow-water environments that were likely transported seaward by storms and currents. Radiolarians are abundant in the shale and phosphorite unit at Skimo Creek and also occur in equivalent strata at Tiglukpuk Creek; high gamma-ray response and elevated total organic-carbon contents (max 5?8 weight percent) also characterize this unit at Skimo Creek. Lithologic, faunal, and geochemical data all suggest that these rocks formed mainly in an outer-ramp to basinal setting with low sedimentation rates, high productivity, and poorly oxygenated bottom water. Shale and mudstone at the top of the Lisburne Group accumulated in a similarly sediment starved, mainly outer ramp environment but lack comparable evidence for high nutrient and low oxygen levels during deposition. Vertical shifts in rock types and faunas delineate numerous parasequences and six probable third-order sequences in the study area; the same sequences are also recognized in the Lisburne Group to the east. Transgressive-system tracts in these sequences generally fine upward, whereas highstand-system tracts coarsen upward. Sequences in the Tiglukpuk Creek section are mostly thinner, contain thinner and more numerous parasequences, and accumulated in somewhat shallower settings than those in the Skimo Creek section. These differences reflect the more seaward position and, thus, increased accommodation space of the Skimo Creek section relative to the Tiglukpuk Creek section during deposition. Organic-rich calcareous shale in the shale and phosphorite unit has a cumulative thickness of at least 15 m and a lateral extent of >50 km; this lithology is the best potential hydrocarbon source rock in the Lisburne Group

Professional Paper↗
USGS2008

Geology of the Northern Part of the Harcuvar Complex, West-Central Arizona

In west-central Arizona near the northeast margin of the Basin and Range Province, the Rawhide detachment fault separates Tertiary and older rocks lacking significant effects of Tertiary metamorphism from Precambrian, Paleozoic, and Mesozoic rocks in the Harcuvar metamorphic core complex below. Much of the northern part of the Harcuvar complex in the Buckskin and eastern Harcuvar Mountains is layered granitic gneiss, biotite gneiss, amphibolite, and minor pelitic schist that was probably deformed and metamorphosed in Early Proterozoic time. In the eastern Buckskin Mountains, Early and Middle Proterozoic plutons having U-Pb zircon ages of 1,683?6.4 mega-annum (Ma) and 1,388?2.3 Ma, respectively, intruded the layered gneiss. Small plutons of alkaline gabbro and diorite intruded in Late Jurassic time. A sample of mylonitized diorite from this unit has a U-Pb zircon age of 149?2.8 Ma. In the Early Cretaceous, amphibolite facies regional metamorphism was accompanied by partial melting and formation of migmatite. Zircon from a granitic layer in migmatitic gneiss in the eastern Harcuvar Mountains has a U-Pb age of 110?3.7 Ma. In the Late Cretaceous, sills and plutons of the granite of Tank Pass were emplaced in both the Buckskin and eastern Harcuvar Mountains. In the Buckskin Mountains those intrusions are locally numerous enough to form an injection migmatite. A pluton of this granite crops out over almost half the area of the eastern Harcuvar Mountains. Paleozoic and Mesozoic sedimentary rocks were caught as slices along south-vergent Cretaceous thrusts related to the Maria fold and thrust belt and were metamorphosed beneath a thick sheet of Proterozoic crustal rocks. Inception of volcanism and basin formation in upper-plate rocks indicates that regional extension started at about 26 Ma, in late Oligocene. The Swansea Plutonic Suite, composed of rocks ranging from gabbro to granite, intruded the lower-plate rocks in the Miocene and Oligocene(?). Granite and a gabbro from the suite have a U-Pb zircon age of 21.86?0.60 Ma. Previously published 40Ar/39Ar ages of hornblende suggest that some of the Swansea Suite is Oligocene. The felsic rocks contain numerous inclusions ranging from porphyritic granite to porphyritic granodiorite. A sample from one inclusion has a U-Pb zircon age of 1,409?6.3 Ma. A discordia line for the U-Pb zircon data from the Swansea Plutonic Suite has an upper intercept at 1,408?3.4 Ma. The Swansea Plutonic Suite probably formed by interaction between mantle material and plutonic rocks at least as old as Middle Proterozoic. An irregular layer in the middle crust, which is thickest under and adjacent to the Buckskin Mountains, may be the level where that interaction took place. During extensional deformation these rocks and all the older rocks were displaced southwest from beneath the rocks of the Colorado Plateau transition zone below an area extending 50?80 kilometers northeast of the Buckskin Mountains as far as Bagdad, Arizona, or beyond. At that time the rocks were variably mylonitized, and a northeast-trending lineation formed. Much of the evidence for the complex sequence of structural events preserved in these rocks in the western Harcuvar Mountains has been obliterated in the northern Harcuvar complex by Miocene deformation.

Professional Paper↗
USGS2010

Geology, geochemistry, and genesis of the Greens Creek massive sulfide deposit, Admiralty Island, southeastern Alaska

In 1996, a memorandum of understanding was signed by representatives of the U.S. Geological Survey and Kennecott Greens Creek Mining Company to initiate a cooperative applied research project focused on the Greens Creek massive sulfide deposit in southeastern Alaska. The goals of the project were consistent with the mandate of the U.S. Geological Survey Mineral Resources Program to maintain a leading role in national mineral deposits research and with the need of Kennecott Greens Creek Mining Company to further development of the Greens Creek deposit and similar deposits in Alaska and elsewhere. The memorandum enumerated four main research priorities: (1) characterization of protoliths for the wall rocks, and elucidation of their alteration histories, (2) determination of the ore mineralogy and paragenesis, including metal residences and metal zonation within the deposit, (3) determination of the ages of events important to ore formation using both geochronology and paleontology, and (4) development of computer models that would allow the deposit and its host rocks to be examined in detail in three dimensions. The work was carried out by numerous scientists of diverse expertise over a period of several years. The written results, which are contained in this Professional Paper, are presented by 21 authors: 13 from the U.S. Geological Survey, 4 from Kennecott Greens Creek Mining Company, 2 from academia, and 2 from consultants. The Greens Creek deposit (global resource of 24.2 million tons at an average grade of 13.9 percent zinc, 5.1 percent lead, 0.15 troy ounce per ton gold, and 19.2 troy ounces per ton silver at zero cutoff) formed in latest Triassic time during a brief period of rifting of the Alexander terrane. The deposit exhibits a range of syngenetic, diagenetic, and epigenetic features that are typical of volcanogenic (VMS), sedimentary exhalative (SEDEX), and Mississippi Valley-type (MVT) genetic models. In the earliest stages of rifting, formation of precious-metal-rich silica-barite-carbonate white ores began at low temperature in a shallow, subaqueous setting, probably a thin carbonate shelf on the flanks of the Alexander landmass. Epigenetic carbonate replacement textures in the footwall dolostones are overlain by stratiform silica-carbonate-barite-rich ores and indicate that early mineralization formed at and just beneath the paleo sea floor by mixing of a reduced, precious-metal-rich, base-metal-poor hydrothermal fluid with oxygenated seawater. As rifting intensified, the shelf was downfaulted and isolated as a graben. Isolation of the basin and onset of starved-basin shale sedimentation was concurrent with emplacement of mafic-ultramafic intrusives at shallow levels in the rift, resulting in an increasingly higher temperature and progressively more anoxic ore-forming environment. The formation of the main stage of massive sulfide ores began as the supply of bacterially reduced sulfur increased in the accumulating shales. As the main-stage mineralization intensified, shale sedimentation inundated the hydrothermal system, eventually forming a cap. Biogenic sulfate reduction supplied reduced sulfur to the base of the shales where mixing occurred with hot, base-metal-rich hydrothermal fluids. Ore deposition continued by destruction and epigenetic replacement of the early white ores in proximal areas and by inflation and diagenetic replacement of unlithified shale at the interface between the white ores and the base of the shale cap. Ore deposition waned as the shales became lithified and as the supply of bacterially reduced sulfur to the site of ore deposition ceased. The final stages of rifting resulted in the emplacement of mafic-ultramafic intrusive rocks into the Greens Creek system and extrusion of voluminous basaltic flows at the top of the Triassic section. Greenschist facies metamorphism during the Jurassic-Cretaceous accretion of the Alexander terrane to the continental margin resulted in recrystalli

Professional Paper↗