Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Book”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55Linked to original sources

Development of slope valleys in the glacimarine environment of a complex subduction zone, Northern Gulf of Alaska

Morphological, seismic-reflection, and sedimentological evidence indicates that glacial ice tongues cut large sea valleys into the Gulf of Alaska continental shelf during the Pleistocene. During the Holocene, glacially-derived sediments from the Copper River and other meltwater streams have been prograding seaward across the shelf, covering the glacial and glacimarine upper Yakataga diamicts that blanketed the shelf and accumulated on the upper slope seaward of the sea valleys during the Pleistocene. GLORIA imagery near Middleton Island provides a new perspective on the glacimarine depositional environment on the continental slope in a collision zone between the Pacific and North American plates. Southwest of Middleton Island, along the subduction margin, sinuous valleys funnel sediment around shelf-edge-parallel, subduction-created, anticlinal ridges that have deflected and locally trapped glacimarine sediment. The slope south and southeast of Middleton Island where oblique convergence occurs, is incised by dendritic, erosional gulley systems, contains no compressional ridges, and thus, the apparently active sediment pathways to the trench are unrestricted. However, below the sea valley mouths, apparently both glacial and glacimarine sediments blanket the upper slope, covering any dendritic gulley systems that may have formed during or since the Pleistocene low stands of sea level.

Alaska↗

Coelomic disorders of fishes

Dropsy is a commonly applied term for coelomic distention due to ascites, or the effusion and collection of fluid freely throughout the coelomic cavity. Dropsy, or ascites, is generally a sign of another ongoing disease process, oftentimes one that is multisystemic and impacting coelomic organs and tissues. Dropsy may be caused by a variety of potential etiological agents, both infectious and noninfectious. Stressors such as rapid change in water temperature may predispose fish to bacterial diseases associated with dropsy. Clinically affected fish display coelomic distension of varying degrees of severity. Generally considered a disease syndrome similar to dropsy, affecting specifically Malawi cichlids, a popular group of ornamental fish among aquarium hobbyists. Water belly occurs among salt water pen-reared salmonid fish, including Atlantic salmon, Chinook salmon and rainbow trout. Dietary changes such as reduction of the feeding rate have been reported to improve the condition among affected fish.

Book chapter↗

Defining blue carbon: The emergence of a climate context for coastal carbon dynamics

Blue Carbon Ecosystems (BCEs) are defined as coastal wetland ecosystems with manageable and atmospherically significant carbon stocks and fluxes. Policy and management opportunities have promoted the emergence of blue carbon as a concept and spurred scientific interest to reduce uncertainties in coastal carbon budgets. The four major BCEs are generally classified by their plant communities: tidal marshes, tidal freshwater forests, mangroves, and seagrass meadows.

Book chapter↗

The North American carbon budget: Past, present, and future

This chapter nicely summarizes and synthesizes the latest scientific information on the North American carbon budget by incorporating terrestrial, anthropogenic, aquatic, and coastal margin CO 2 and CH 4 dynamics. Starting with a historical context, the chapter summarizes current understanding of the magnitudes and trends of carbon stocks and fluxes at the continental scale. It also provides a regional context by stratifying the continent to countries and climate assessment regions and discusses the societal drivers, impacts, and carbon management decisions. Knowledge gaps and research needs are also identified. This chapter is well-written and clearly organized, and provides a broad context beyond individual chapters. Some of the main ways the chapter can be improved include the following: some work is needed on the Key Findings (discussed below); the goals and objectives should be explicitly described; critical content areas missing from the chapter are interannual variability of carbon fluxes and impacts of severe and extended droughts; indicators and feedbacks are missing from Section 2.4; consistent use of units is recommended; numbers with 3-4 significant digits over-state the confidence the reader should have, and all numbers should include uncertainties. And one broader concern to note: This chapter follows the global overview in Chapter 1, where “sinks” are sinks in the cycle perturbed by anthropogenic CO 2 and CH 4 , and the assumption is that globally, the net unperturbed background sinks are zero summed across all reservoirs. Yet in this chapter, “sinks” are net fluxes out of the atmosphere, background + perturbation. For the coastal ocean, inland waters, etc.—where lateral transport is significant—these sources and sinks include background/pre-industrial fluxes that are balanced by fluxes elsewhere. These distinctions must be made clear so that the reader is not given an impression of a greater or lesser sink for anthropogenic CO 2 than is there (e.g., P74, lines 4-6).

Book chapter↗

Thermocouple psychrometry

Thermocouple psychrometry is a technique that infers the water potential of the liquid phase of a sample from measurements within the vapor phase that is in equilibrium with the sample. The theoretical relation between water potential of the liquid phase and relative humidity of the vapor phase is given by the Kelvin equation Ψ = energy/volume = (RT/Vw) ln(p/po) [3.2.3–1] where ψ is water potential (sum of matric and osmotic potential, MPa), R is the universal gas constant (8.314 × 10 -6 MJ mol -1 K -1 ), T is temperature (K), Vw is molar volume of water (1.8 × 10 -5 m 3 mol -1 ), and p/p o is relative humidity expressed as a fraction where p is actual vapor pressure of air in equilibrium with the liquid phase (MPa) and p o is saturation vapor pressure (MPa) at T.

Soil Science Society of America Book Series↗

Miscellaneous methods for measuring matric or water potential

A variety of techniques to measure matric potential or water potential in the laboratory and in the field are described in this section. The techniques described herein require equilibration of some medium whose matric or water potential can be determined from previous calibration or can be measured directly. Under equilibrium conditions the matric or water potential of the medium is equal to that of the soil. The techniques can be divided into: (i) those that measure matric potential and (ii) those that measure water potential (sum of matric and osmotic potentials). Matric potential is determined when the sensor matrix is in direct contact with the soil, so salts are free to diffuse in or out of the sensor matrix, and the equilibrium measurement therefore reflects matric forces acting on the water. Water potential is determined when the sensor is separated from the soil by a vapor gap, so salts are not free to move in or out of the sensor, and the equilibrium measurement reflects the sum of the matric and osmotic forces acting on the water. Seven different techniques are described in this section. Those that measure matric potential include (i) heat dissipation sensors, (ii) electrical resistance sensors, (iii) frequency domain and time domain sensors, and (iv) electro-optical switches. A method that can be used to measure matric potential or water potential is the (v) filter paper method. Techniques that measure water potential include (vi) the Dew Point Potentiameter (Decagon Devices, Inc., Pullman, WA1) (water activity meter) and (vii) vapor equilibration. The first four techniques are electronically based methods for measuring matric potential. Heat dissipation sensors and electrical resistance sensors infer matric potential from previously determined calibration relations between sensor heat dissipation or electrical resistance and matric potential. Frequency-domain and timedomain matric potential sensors measure water content, which is related to matric potential of the sensor through calibration. Electro-optical switches measure changes in light transmission through thin, nylon filters as they absorb or desorb water in response to changes in matric potential. Heat dissipation sensors and electrical resistance sensors are used primarily in the field to provide information on matric potential. Frequency domain matric potential sensors are new and have not been widely used. Time domain matric potential sensors and electro-optical switches are new and have not been commercialized. For the fifth technique, filter paper is used as the standard matrix. The filter paper technique measures matric potential when the filter paper is in direct contact with soil or water potential when separated from soil by a vapor gap. The Dew Point Potentiameter calculates water potential from the measured dew point and sample temperature. The vapor equilibration technique involves equilibration of soil samples with salt solutions of known osmotic potential. The filter paper, Dew Point Potentiameter, and vapor equilibration techniques are generally used in the laboratory to measure water potential of disturbed field samples or to measure water potential for water retention functions.

Soil Science Society of America Book Series↗

Restoration of mangrove forest

Mangrove forests occur worldwide along tropical coasts in inundated soils where primary production and anaerobic conditions contribute to the building of soil organic matter (Also see Mangroves Hot-spot, Volume 2). Note that peat may accumulate in certain coastal mangrove (Middleton and McKee, 2001). The actual amount of soil organic matter stored in these wetlands depends on the balance between primary production and decomposition processes (Middleton and McKee, 2001; Kolka et al., 2018; Middleton, 2020). The restoration of mangroves can increase carbon stocks both in soil and aboveground biomass (Wickland et al., 2013; Chimner et al., 2017; Friess et al., 2019). While tropical inland peatland forests may have higher carbon sequestration rates than mangrove swamps, methane (CH4) emissions are generally lower in mangrove swamp, so that these wetlands have greater carbon sequestration potential (Kolka et al., 2018; Al-Haj and Fulweiler, 2020). Mangroves and forested boreal and temperate peatlands tend to store more carbon than non-forested peatlands (Kolka et al., 2018).

Book chapter↗

Forward

No abstract available.

Book chapter↗

Modeling mangrove forest migration along the southwest coast of Florida under climate change

Mangrove forests dominate in the intertidal zones of the tropical extent of the coast about the Gulf of Mexico, USA. Global climate change forecasts suggest that these coastal forests will be among those ecosystems most immediately threatened by projected increases in sea level and hurricanes. The interactive effects of environmental conditions that prevail in these forests and the changes that are likely to occur in a global warming climate may lead to major shifts in forest composition, structure, and function of mangrove ecosystems.

Florida↗

Linear models: permutation methods

Permutation tests (see Permutation Based Inference) for the linear model have applications in behavioral studies when traditional parametric assumptions about the error term in a linear model are not tenable. Improved validity of Type I error rates can be achieved with properly constructed permutation tests. Perhaps more importantly, increased statistical power, improved robustness to effects of outliers, and detection of alternative distributional differences can be achieved by coupling permutation inference with alternative linear model estimators. For example, it is well-known that estimates of the mean in linear model are extremely sensitive to even a single outlying value of the dependent variable compared to estimates of the median [7, 19]. Traditionally, linear modeling focused on estimating changes in the center of distributions (means or medians). However, quantile regression allows distributional changes to be estimated in all or any selected part of a distribution or responses, providing a more complete statistical picture that has relevance to many biological questions [6]...

Book chapter↗

Unsaturated zone flow processes

Water flow in the unsaturated zone is greatly influenced by unsaturated hydrostatics (water content, energy, pressure, and retention) and by unsaturated hydrodynamics (diffuse flow and preferential flow). Important multiphase processes include the transport of gases, nonaqueous liquids, and solid particles. Numerous means are available for determination of unsaturated conditions and properties, both measurement (of moisture state, water retention, and dynamic characteristics) and through various formulas and models that are mostly empirical in nature, but in some cases incorporating insight into unsaturated‐zone physical processes. Applications to practical problems include models and techniques relating to distributions of water and energy, fluxes at the land surface, inputs, outputs, and fluxes within the unsaturated zone, all of which are frequently complicated by heterogeneity and preferential flow. Further scientific advance requires new measurement techniques and theoretical constructs that more adequately represent the important physical processes within practical modeling schemes.

Book chapter↗

Surface slip during large Owens Valley earthquakes

The 1872 Owens Valley earthquake is the third largest known historical earthquake in California. Relatively sparse field data and a complex rupture trace, however, inhibited attempts to fully resolve the slip distribution and reconcile the total moment release. We present a new, comprehensive record of surface slip based on lidar and field investigation, documenting 162 new measurements of laterally and vertically displaced landforms for 1872 and prehistoric Owens Valley earthquakes. Our lidar analysis uses a newly developed analytical tool to measure fault slip based on cross‐correlation of sublinear topographic features and to produce a uniquely shaped probability density function (PDF) for each measurement. Stacking PDFs along strike to form cumulative offset probability distribution plots (COPDs) highlights common values corresponding to single and multiple‐event displacements. Lateral offsets for 1872 vary systematically from ∼1.0 to 6.0 m and average 3.3 ± 1.1 m (2σ). Vertical offsets are predominantly east‐down between ∼0.1 and 2.4 m, with a mean of 0.8 ± 0.5 m. The average lateral‐to‐vertical ratio compiled at specific sites is ∼6:1. Summing displacements across subparallel, overlapping rupture traces implies a maximum of 7–11 m and net average of 4.4 ± 1.5 m, corresponding to a geologic M w ∼7.5 for the 1872 event. We attribute progressively higher‐offset lateral COPD peaks at 7.1 ± 2.0 m, 12.8 ± 1.5 m, and 16.6 ± 1.4 m to three earlier large surface ruptures. Evaluating cumulative displacements in context with previously dated landforms in Owens Valley suggests relatively modest rates of fault slip, averaging between ∼0.6 and 1.6 mm/yr (1σ) over the late Quaternary.

Book↗

Mass spectrometric in the analysis of inorganic substances

Mass spectrometry is an analytical technique used to measure the composition of a substance by isolating specific analyte components according to their individual atomic or molecular mass‐to‐charge ratios. Inorganic mass spectrometry is specifically used to determine the elemental and isotopic composition of the material being analyzed. The techniques are capable of the measurement of a range of concentrations from major components to ultratrace constituents. Several instrumental approaches are used to separate and measure the abundance of component ions formed from the sample. These techniques include electron ionization mass spectrometry (EIMS), inductively coupled plasma mass spectrometry (ICPMS), thermal ionization mass spectrometry (TIMS) and spark source mass spectrometry (SSMS). These techniques utilize a variety of mass spectrometers including ion trap, quadrupole, magnetic sector and time‐of‐flight mass analyzers, depending on the type of sample being analyzed and the desired quality of the results. Often sample introduction techniques can be utilized to enhance the capabilities for solving specific analytical chemistry problems.

Book chapter↗