SEARCH · Geology Reports

Results for “Technology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54Linked to original sources

USGS2011

Landslide inventories: The essential part of seismic landslide hazard analyses

A detailed and accurate landslide inventory is an essential part of seismic landslide hazard analysis. An ideal inventory would cover the entire area affected by an earthquake and include all of the landslides that are possible to detect down to sizes of 1–5 m in length. The landslides must also be located accurately and mapped as polygons depicting their true shapes. Such mapped landslide distributions can then be used to perform seismic landslide hazard analysis and other quantitative analyses. Detailed inventory maps of landslide triggered by earthquakes began in the early 1960s with the use of aerial photography. In recent years, advances in technology have resulted in the accessibility of satellite imagery with sufficiently high resolution to identify and map all but the smallest of landslides triggered by a seismic event. With this ability to view any area of the globe, we can acquire imagery for any earthquake that triggers significant numbers of landslides. However, a common problem of incomplete coverage of the full distributions of landslides has emerged along with the advent of high resolution satellite imagery.

Engineering Geology↗

USGS2016

Managing nutrients, water, and energy for producing more food with low pollution (MoFoLoPo); What would success look like?

Synthetic nitrogen (N) fertilizer has enabled modern agriculture to greatly improve human nutrition during the 20th century, but it has also created unintended human health and environmental pollution challenges for the 21st century. Averaged globally, about half of the fertilizer N applied to farms is removed with the crops, while the other half remains in the soil or is lost from farmers’ fields, resulting in water and air pollution. As human population continues to grow and food security improves in the developing world, the dual development goals of producing more nutritious food with low pollution will require both technological and socio-economic innovations in agriculture.

Environmental Development↗

USGS2018

Linking otolith microchemistry and surface water contamination from natural gas mining

Unconventional natural gas drilling and the use of hydraulic fracturing technology have expanded rapidly in North America. This expansion has raised concerns of surface water contamination by way of spills and leaks, which may be sporadic, small, and therefore difficult to detect. Here we explore the use of otolith microchemistry as a tool for monitoring surface water contamination from generated waters (GW) of unconventional natural gas drilling. We exposed Brook Trout in the laboratory to three volumetric concentrations of surrogate generated water (SGW) representing GW on day five of drilling. Transects across otolith cross-sections were analyzed for a suite of elements by LA-ICP-MS. Brook Trout exposed to a 0.01–1.0% concentration of SGW for 2, 15, and 30 days showed a significant ( p < 0.05) relationship of increasing Sr and Ba concentrations in all but one treatment. Analyses indicate lesser concentrations than used in this experiment could be detectable in surface waters and provide support for the use of this technique in natural habitats. To our knowledge, this is the first demonstration of how trace elements in fish otoliths may be used to monitor for surface water contamination from GW.

Environmental Pollution↗

USGS2022

Institutional barriers to actionable science: Perspectives from decision support tool creators

Scholars have identified a ‘usability gap’ between science and its ability to inform real-world decisions as well as a range of factors that facilitate or impede attempts to span the usability gap with information products. However, most attention has focused on barriers related to information users; much less research focuses on the unique institutional and organizational barriers experienced by creators of decision support tools. To address this gap, we used semi-structured interviews to investigate the perspectives and experiences of practitioners holding scientific or technology roles, including their goals for their tools, their perceptions of success in meeting those goals, and the barriers and opportunities they encountered. We find that there is often a mismatch between what tool creators know is necessary to achieve success for their tools and what is actually possible given various constraints. Our results suggest that knowledge may be a less important barrier to conducting actionable science through creating decision support tools than the institutional context in which tool creators work.

Environmental Science and Policy↗

USGS2013

Parallelization of a hydrological model using the message passing interface

With the increasing knowledge about the natural processes, hydrological models such as the Soil and Water Assessment Tool (SWAT) are becoming larger and more complex with increasing computation time. Additionally, other procedures such as model calibration, which may require thousands of model iterations, can increase running time and thus further reduce rapid modeling and analysis. Using the widely-applied SWAT as an example, this study demonstrates how to parallelize a serial hydrological model in a Windows® environment using a parallel programing technology—Message Passing Interface (MPI). With a case study, we derived the optimal values for the two parameters (the number of processes and the corresponding percentage of work to be distributed to the master process) of the parallel SWAT (P-SWAT) on an ordinary personal computer and a work station. Our study indicates that model execution time can be reduced by 42%–70% (or a speedup of 1.74–3.36) using multiple processes (two to five) with a proper task-distribution scheme (between the master and slave processes). Although the computation time cost becomes lower with an increasing number of processes (from two to five), this enhancement becomes less due to the accompanied increase in demand for message passing procedures between the master and all slave processes. Our case study demonstrates that the P-SWAT with a five-process run may reach the maximum speedup, and the performance can be quite stable (fairly independent of a project size). Overall, the P-SWAT can help reduce the computation time substantially for an individual model run, manual and automatic calibration procedures, and optimization of best management practices. In particular, the parallelization method we used and the scheme for deriving the optimal parameters in this study can be valuable and easily applied to other hydrological or environmental models.

Environmental Modelling and Software↗

USGS2016

Modelling with stakeholders - Next generation

This paper updates and builds on ‘Modelling with Stakeholders’ Voinov and Bousquet, 2010 which demonstrated the importance of, and demand for, stakeholder participation in resource and environmental modelling. This position paper returns to the concepts of that publication and reviews the progress made since 2010. A new development is the wide introduction and acceptance of social media and web applications, which dramatically changes the context and scale of stakeholder interactions and participation. Technology advances make it easier to incorporate information in interactive formats via visualization and games to augment participatory experiences. Citizens as stakeholders are increasingly demanding to be engaged in planning decisions that affect them and their communities, at scales from local to global. How people interact with and access models and data is rapidly evolving. In turn, this requires changes in how models are built, packaged, and disseminated: citizens are less in awe of experts and external authorities, and they are increasingly aware of their own capabilities to provide inputs to planning processes, including models. The continued acceleration of environmental degradation and natural resource depletion accompanies these societal changes, even as there is a growing acceptance of the need to transition to alternative, possibly very different, life styles. Substantive transitions cannot occur without significant changes in human behaviour and perceptions. The important and diverse roles that models can play in guiding human behaviour, and in disseminating and increasing societal knowledge, are a feature of stakeholder processes today.

Environmental Modelling and Software↗

USGS2024

An open-source workflow for scaling burn severity metrics from drone to satellite to support post-fire watershed management

Wildfires are increasing in size and severity across much of the western United States, exposing vulnerable wildland-urban interfaces to post-fire hazards. The Mediterranean chaparral region of Northern California contains many high sloping watersheds prone to hazardous post-fire flood events and identifying watersheds at high risk of soil loss and debris flows is a priority for post-fire response and management. Uncrewed Aerial Systems (UAS; aka drones) offer post-fire management teams the ability to quickly mobilize and survey burned areas with very high-resolution imagery (∼1 cm), facilitating emergency management and post-fire hazard assessment. However, adoption of this technology by hazard response teams may be hindered by complicated workflows for UAS data acquisition, image processing and analysis. We present an open-source workflow using mature Geographic Information Systems (GIS) software and Python packages in a Jupyter Notebook environment that guides users through classification of true-color UAS imagery to generate high resolution burn severity maps which can then be scaled across larger watersheds using Sentinel-2 normalized burn ratio (NBR) images. Soil burn severity classifications using a weighted brightness (WB) image and Char Index (CI) generated from UAS imagery were validated with in-situ data and random stratified points, resulting in the CI having the highest overall accuracy of 87.5%. CI also displayed a marginally stronger relationship over the WB with the post-fire Sentinel-2 NBR, R 2 = 0.79 and R 2 = 0.78 respectively. Our methods offer the unique opportunity to standardize GIS workflows, promoting replication through transparency, while improving the user's understanding of scientific GIS functionality.

California↗

USGS2019

The future of recreational fisheries: Advances in science, monitoring, management, and practice

Recreational fisheries (RF) are complex social-ecological systems that play an important role in aquatic environments while generating significant social and economic benefits around the world. The nature of RF is diverse and rapidly evolving, including the participants, their priorities and behaviors, and the related ecological impacts and social and economic benefits. RF can lead to negative ecological impacts, particularly through overexploitation of fish populations and spread of non-native species and genotypes through stocking. Hence, careful management and monitoring of RF is essential to sustain these ecologically and socioeconomically important resources. This special issue on recreational fisheries contains diverse research, syntheses, and perspectives that highlight the advances being made in RF research, monitoring, management, and practice, which we summarize here. Co-management actions are rising, often involving diverse interest groups including government and non-government organizations; applying collaborative management practices can help balance social and economic benefits with conservation targets. Technological and methodological advances are improving the ability to monitor biological, social, and economic dynamics of RF, which underpin the ability to maximize RF benefits through management actions. To ensure RF sustainability, much research focuses on the ecological aspects of RF, as well as the development of management and angling practices that reduce negative impacts on fish populations. For example, angler behavior can be influenced to conform to conservation-minded angling practices through regulations, but is often best accomplished through growing bottom-up social change movements. Anglers can also play an important role in fisheries monitoring and conservation, including providing data on fish abundance and assemblages (i.e., citizen science). The increasing impacts that growing human populations are having on the global environment are threatening many of the natural resources and ecosystem services they provide, including valuable RF. However, with careful development of research initiatives, monitoring and management, sustainable RF can generate positive outcomes for both society and natural ecosystems and help solve allocation conflicts with commercial fisheries and conservation.

Fisheries Research↗

USGS2025

Using angler-submitted records to interpret the spatial seasonality of a large predator (Black bass, Micropterus spp.)

In addition to having cultural, social, and economic significance, large predatory fish affect aquatic communities from the top down and serve as markers of ecosystem health. A focus on large predators is critical for managing ecosystems, conserving species, and guaranteeing the sustainability of aquatic resources. Recreational fishing is inherently biased towards large fish, and anglers possess the strength in numbers and geographical dispersion that enable them to sample the upper tiers of size distributions rarely encountered in standard fish surveys. We sought to further understand the ecological requirements and spatial seasonality of exceptionally sized black bass ( Micropterus spp.) via angler catches. Black bass > 3.6 kg were examined across 147 reservoirs in Texas, USA, with 2817 fish recorded by anglers into an online database in 2018–2024. Most fish were caught in late-winter and early-spring in line with spawning activities that included movements in-and-out of shallow water, nest building, and nest defense. Approximately 54 % of fish were caught with bottom-oriented fishing lures and techniques, and 40 % midwater; surface catches were less common. The efficacy of angling techniques varied seasonally. Those effective in winter were midwater, while those effective in summer were bottom or surface. Conversely, a combination of bottom and midwater techniques were effective in the fall and spring, suggesting cyclic habitat transitions. Moreover, the frequency with which fish were caught over various macrohabitats varied seasonally and cyclically. Our findings have the potential to inform habitat management that supports large predators and their migratory relocations. Our findings also underscore the value of using anglers and technology as sources of difficult-to-obtain fish and environmental data that may evade regular monitoring.

Texas↗

USGS2019

Space use, forays, and habitat selection in California Spotted Owls (Strix occidentalis occidentalis): New insights from high resolution GPS tracking

Our current understanding of the relationship between imperiled species and forest management can benefit from global positioning system (GPS) technologies. Fauna of lateseral stage forests have historically been difficult to detect and track in rugged terrain, leading to challenges in movement characterization and conservation. We investigated movement of California Spotted Owls ( Strix occidentalis occidentalis ) using automated GPS loggers affixed to 15 owls in the northern Sierra Nevada, California. We used >17,000 locations from individual owls to characterize homerange size, movement distances, and roosting and foraging habitat selection at four spatio-temporal scales (landscape, home range, foray, nightly) during the breeding season (April–August). Additionally, we assessed owl use of Protected Activity Centers (PACs), which are designated by the U.S.D.A. Forest Service to protect nesting and roosting habitat. Our results corroborated some previous findings about habitat requirements of California Spotted Owls, while also revealing new nuances in space use and habitat selection. Roosting and foraging owls selected stands with high canopy cover and large trees at multiple spatio-temporal scales, with foraging owls showing strongest selection at the largest (landscape) scale investigated. Although owls selected for PACs while foraging and roosting, PACs protected less than one quarter of foraging space use (volume of use) and fewer than half of observed roosts during the breeding season. Female owl home ranges were double the size of male home ranges, and distances travelled from the nest by females were 1.3 times greater than distances travelled by males, with non-breeding females travelling farthest and visiting up to six PACs during a single breeding season. Foraying behavior of this sort has not been documented previously in California Spotted Owls. Our findings support protection of later seral stage forest attributes for roosting and foraging California Spotted Owls. Given their selection for later seral forest attributes, strongest evidence of foraging habitat selection at the landscape scale, long distances travelled by owls and limited habitat protection afforded by PACs, habitat connectivity across the landscape is likely an important component for owl conservation, and distribution of current protected areas may be inadequate for this wide-ranging species.

California↗

USGS2019

Biogenic coal-to-methane conversion can be enhanced with small additions of algal amendment in field-relevant upflow column reactors

ubsurface coal environments, where biogenic coal-to-methane conversion occurs, are difficult to access, resulting in inherent challenges and expenses for in situ experiments. Previous batch reactor studies provided insights into specific processes, pathways, kinetics, and engineering strategies, but field-relevance is restricted due to limited substrate availability or byproduct accumulation that may influence reactions or metabolisms. In this study, continuous-flow column reactors were used to overcome some batch limitations, improve the understanding of in situ conditions, and increase field-relevance for subsurface engineering technology development. The bench-scale reactor system was constructed to investigate the addition of algal amendment for enhancing microbial coal-to-methane conversion previously developed in batch systems. Four reactor columns were packed with coal and inoculated with a microbial consortium from the same Flowers-Goodale coal bed. Two reactors were amended with 13 C-labeled algal amendment on day 0, and two were unamended. On day 61, one previously amended and one previously unamended reactor were re-amended. Produced gases were captured in a gas trap, and CH 4 and CO 2 were quantified. The reactor amended twice produced 1712.6 µmol CH 4 (4.6% as 13 CH 4 ). The reactor amended only on day 0 produced 1485.5 µmol CH 4 (2.6% as 13 CH 4 ). The reactor amended only on day 61 produced 278.9 µmol CH 4 (3.9% as 13 CH 4 ). The reactor with no amendment produced no measurable gases for the duration of the 172-day experiment. Amendment increased the rate of coal-to-methane conversion and total gas production; most of the produced gases were due to coal conversion with only small contributions (<7%) from amendment conversion.

Fuel↗

USGS2020

Ineffectiveness of light emitting diodes as underwater deterrents for Long-tailed Ducks Clangula hyemalis

Gillnet bycatch accounts for over 400,000 bird mortalities worldwide every year, affecting a wide variety of species, especially those birds that dive when foraging. Technological solutions to improve gillnet visibility or deter birds from approaching nets, such as LED lights, are essential for aiding diving birds to perceive nets as a hazard. Designing such solutions requires obtaining visual and behavioural ecology information from species to assess their ability to see the warning devices, and to examine their behavioural responses to them. Seaducks, particularly Long-tailed Ducks Clangula hyemalis, have high bycatch mortality rates. We examined the visual fields of four Long-tailed Ducks to understand their three-dimensional view around the head. The visual field characteristics of this species indicate a reliance on visual guidance for foraging associated with their capture of varied, mobile prey in their generalist diet. We subsequently conducted dive tank trials to test the effectiveness of 12 different LED treatments as visual deterrents to the underwater foraging behaviour of 8 Long-tailed Ducks. During each trial, ducks were offered food rewards from a specific underwater location in a dive tank, having the choice of whether to take the food or not. At the same time, they were exposed to either one LED light or the control (no light) to determine whether the presence of each light affected the foraging success rate of dives compared to the control. Exposure of ducks to all 13 treatment combinations was randomised over the trial period. White lights with an increasing flash rate were shown to have a significant positive effect on foraging success, and likely acted as a visual attractant, rather than as a deterrent. No light treatment significantly reduced the foraging success of ducks. LED lights did not inhibit the feeding of Long-tailed Ducks. Such lights may be ineffective as underwater visual deterrents when deployed on gillnets, while white flashing lights may make foraging sites more attractive to Long-tailed Ducks.

Global Ecology and Conservation↗

USGS2015

Large-scale dam removal on the Elwha River, Washington, USA: fluvial sediment load

The Elwha River restoration project, in Washington State, includes the largest dam-removal project in United States history to date. Starting September 2011, two nearly century-old dams that collectively contained 21 ± 3 million m 3 of sediment were removed over the course of three years with a top-down deconstruction strategy designed to meter the release of a portion of the dam-trapped sediment. Gauging with sediment-surrogate technologies during the first two years downstream from the project measured 8,200,000 ± 3,400,000 tonnes of transported sediment, with 1,100,000 and 7,100,000 t moving in years 1 and 2, respectively, representing 3 and 20 times the Elwha River annual sediment load of 340,000 ± 80,000 t/y. During the study period, the discharge in the Elwha River was greater than normal (107% in year 1 and 108% in year 2); however, the magnitudes of the peak-flow events during the study period were relatively benign with the largest discharge of 292 m 3 /s (73% of the 2-year annual peak-flow event) early in the project when both extant reservoirs still retained sediment. Despite the muted peak flows, sediment transport was large, with measured suspended-sediment concentrations during the study period ranging from 44 to 16,300 mg/L and gauged bedload transport as large as 24,700 t/d. Five distinct sediment-release periods were identified when sediment loads were notably increased (when lateral erosion in the former reservoirs was active) or reduced (when reservoir retention or seasonal low flows and cessation of lateral erosion reduced sediment transport). Total suspended-sediment load was 930,000 t in year 1 and 5,400,000 t in year 2. Of the total 6,300,000 ± 3,200,000 t of suspended-sediment load, 3,400,000 t consisted of silt and clay and 2,900,000 t was sand. Gauged bedload on the lower Elwha River in year 2 of the project was 450,000 ± 360,000 t. Bedload was not quantified in year 1, but qualitative observations using bedload-surrogate instruments indicated detectable bedload starting just after full removal of the downstream dam. Using comparative studies from other sediment-laden rivers, the total ungauged fraction of < 2-mm bedload was estimated to be on the order of 1.5 Mt.

Washington↗

USGS2021

Uncovering process domains in large rivers: Patterns and potential drivers of benthic substrate heterogeneity in two North American riverscapes

Identifying and understanding functional process domains (sensu Montgomery, 1999) in rivers is paramount for linking the physical habitat template to ecosystem structure and function. To date, efforts to do this have been rare, especially in large rivers, as they require appropriate tools for quantifying habitat heterogeneity with fine-scale resolution across broad spatial extents. In this study, we used side-scan sonar technology to map riverbed substrate at six sites in the Yellowstone and Missouri rivers. Substrate maps were then analyzed and visualized using geospatial analysis to relate fine-grained spatial substrate patterns to process domain structure. Our findings revealed two distinct nested domains of substrate patchiness, suggesting that different factors are responsible for shaping patterns of substrate at different scales. Although small-scale patchiness in substrate was likely driven by internal, or autogenic, physical processes, patterns at larger segment extents (>3 km) were often driven by abrupt transitions in habitat related to exogenous factors such as lateral erosion of talus, tributary inputs, and bank armoring. Additionally, we found that heterogeneity in benthic substrate increased with spatial extent at all of our study sites; however, this relationship was lower in the Missouri River, which is altered by impoundment. Our study represents one of the first efforts to relate benthic habitat heterogeneity to nested process domain structure in large riverscapes, and offers a unique perspective for linking landscape processes, geomorphological habitat heterogeneity, and biological structure and function in large rivers.

Montana, North Dakota↗

USGS2025

Development of ‘SedCam’— A close-range remote sensing method of estimating suspended-sediment concentration in small rivers

The adaptation of suspended-sediment surrogate technologies continues to rapidly expand across geomorphology and fluvial sediment monitoring efforts. Over a decade of research and development shows increased reliability and accuracy of in-situ surrogates with reduced program cost as compared to traditional sample-based methods, but environmental fouling and probe damage can be problematic. The SedCam technique is a unique non-contact close-range remote sensing method to estimate suspended-sediment concentration from multispectral imagery of a river surface. In contrast to typical airborne- or satellite-based platforms, SedCam uses broadband sensors with lower spectral resolution (three bands covering wavelengths of 340 to 1100 nm) but greater spatial resolution (0.5 mm pixel size; equivalent to medium to coarse sand) and temporal resolution (15-min intervals during daylight hours). This paper summarizes lessons learned from two studies, utilizing three consumer-grade digital cameras (each with different spectral signatures) at two different rivers (each with different sediment characteristics). >90,000 images and 174 concurrent physical samples represent a collective period of 26 months. A subset of these data pairs supports the development of four regression models. Statistical diagnostics show model error can be <40 % when surface point samples are used, with coefficients of determination ≥0.90. This novel approach shows similar accuracy to other surrogate methods such as instream turbidity. Results of this study indicate that optimizing spectra based on expected suspended-sediment concentration increases model performance.

Geomorphology↗

USGS2016

The distribution and composition of REE-bearing minerals in placers of the Atlantic and Gulf coastal plains, USA

Rare earth element (REE) resources are currently of great interest because of their importance as raw materials for high-technology manufacturing. The REE-phosphates monazite (light REE enriched) and xenotime (heavy REE enriched) resist weathering and can accumulate in placer deposits as part of the heavy mineral assemblage. The Atlantic and Gulf coastal plains of the southeastern United States are known to host heavy mineral deposits with economic concentrations of zircon, ilmenite and rutile. This study provides a perspective on the distribution and composition of REE phosphate minerals in the region. The elemental chemistry and mineralogy of sands and associated heavy-mineral assemblages from new and archived sediment samples across the coastal plains are examined, along with phase-specific compositions of monazite, xenotime and zircon. Both monazite and xenotime are present across the coastal plains. The phase-specific compositions allow monazite content to be estimated using La as a geochemical proxy. Similarly, both Y and Yb are geochemical proxies for xenotime, but their additional presence in zircon and monazite require a correction to prevent overestimation of xenotime content. Applying this correction, maps of monazite and xenotime content across the coastal plains were generated using sample coverage from the National Geochemical Database (NGS) and National Uranium Resource Evaluation (NURE). The NGS and NURE approach of sampling stream sediments in small watersheds links samples to nearby lithologies. The results show an approximately 40 km-wide band of primarily Cretaceous, marine sediments bordering the Piedmont province from North Carolina to Alabama in which monazite and xenotime content are relatively high (up to 4.4 wt. % in < 150 μm bulk sediment). Strong correlations between concentrations of the two phases were found, with estimated monazite:xenotime ratios ranging approximately 6:1 to 12:1 depending upon the dataset analyzed. From a resource perspective, xenotime correlation with monazite indicates a heavy REE potential in coastal plain placers, and exploration may be warranted within the identified coastal plain band along the boundary of the Piedmont region.

Journal of Geochemical Exploration↗

USGS2022

Tungsten skarn potential of the Yukon-Tanana Upland, eastern Alaska, USA—A mineral resource assessment

Tungsten (W) is used in a variety of industrial and technological applications and has been identified as a critical mineral for the United States, India, the European Union, and other countries. These countries rely on W imports mostly from China, which leaves them vulnerable to supply disruption. Consequently, the U.S. government has a current initiative to understand domestic resource potential. The eastern Alaska portion of the Yukon-Tanana Upland (YTU), is prospective for W skarn deposits, the major source of global W supply. The regional geology consists of juxtaposed Paleozoic lithotectonic packages that were reaccreted to North America in the Mesozoic . Multiple subsequent episodes of arc-related magmatism intruded the lithotectonic packages, accompanied by W skarn formation mostly associated with 100–90 Ma intrusions; major W skarn deposits in Canada are part of the same metallogenic event (e.g., Mactung, Cantung). In this paper, we present an assessment for undiscovered W skarn resources for parts of the lesser-explored western (Alaskan) portion of the YTU. We used GIS proximity analysis to map the intersection of pluton and carbonate-bearing rocks to define three permissive tracts for W skarn deposits. The permissive tracts were qualitatively assessed by mineral potential mapping using region-wide sediment geochemistry and mineral concentrate datasets. This analysis showed that much of the western YTU has high potential for undiscovered W skarn deposits, whereas the eastern and southern YTU had only isolated areas of medium to high potential. Historical production and the quality of the geochemistry data of the western YTU tract (ca. 9200 km 2 ) permitted a quantitative assessment of undiscovered W resources. Probabilistic estimates by a panel of 20 experts predicted a 70% chance of one to three undiscovered W skarn deposits in the western YTU tract. The rationale for favorability employed by the expert panel included favorable lithology, previous production, clustering of previously mined deposits, W placers in the area, lack of recent exploration, pan concentrates containing W minerals, and W geochemical anomalies. Estimates were combined with a global grade and tonnage model for W skarns in a Monte Carlo simulation and provided a median estimate of undiscovered resources of 94 kt WO 3 . If the undiscovered W skarn deposits are located close to infrastructure (e.g., near Fairbanks, or close to roads and/or power grid), application of an economic filter indicates that the median total economically recoverable WO 3 is 63 kt with a net present value (NPV) of $330 million USD (2008 dollars). Whereas if deposits are far from infrastructure, median recoverable WO 3 is only 30 kt and the NPV is $44 million. Our models for contained WO 3 resources and NPV estimates for the western YTU tract are considerably lower than the known resources in skarns in adjacent areas in Canada. Estimates for the western YTU are also lower than preliminary estimates for undiscovered W skarn deposits in areas of the western conterminous United States. We speculate that lower permeability and continuity of favorable carbonate rock horizons in the relatively higher-grade metamorphic country rocks in the Alaska portion of the YTU may explain some of the differences in prospectivity. More detailed geologic mapping, modern geochemistry, and geophysical surveys are needed to refine the resource potential of the whole YTU. Regardless, quantitative mineral resource assessment provides a useful tool for making first-order regional estimates of undiscovered resources, identifying target areas for new data acquisition, and guiding research on the fundamental controls of district-scale metallogenic endowments.

Alaska↗

USGS2015

Rare earth elements in sedimentary phosphate deposits: Solution to the global REE crisis?

The critical role of rare earth elements (REEs), particularly heavy REEs (HREEs), in high-tech industries has created a surge in demand that is quickly outstripping known global supply and has triggered a worldwide scramble to discover new sources. The chemical analysis of 23 sedimentary phosphate deposits (phosphorites) in the United States demonstrates that they are significantly enriched in REEs. Leaching experiments using dilute H 2 SO 4 and HCl, extracted nearly 100% of their total REE content and show that the extraction of REEs from phosphorites is not subject to the many technological and environmental challenges that vex the exploitation of many identified REE deposits. Our data suggest that phosphate rock currently mined in the United States has the potential to produce a significant proportion of the world's REE demand as a byproduct. Importantly, the size and concentration of HREEs in some unmined phosphorites dwarf the world's richest REE deposits. Secular variation in phosphate REE contents identifies geologic time periods favorable for the formation of currently unrecognized high-REE phosphates. The extraordinary endowment, combined with the ease of REE extraction, indicates that such phosphorites might be considered as a primary source of REEs with the potential to resolve the global REE (particularly for HREE) supply shortage.

Gondwana Research↗