Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Sensors”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54Linked to original sources
USGS2022

In situ enhancement and isotopic labeling of biogenic coalbed methane

Subsurface microbial (biogenic) methane production is an important part of the global carbon cycle that has resulted in natural gas accumulations in many coal beds worldwide. Laboratory studies suggest that complex carbon-containing nutrients (e.g., yeast or algae extract) can stimulate methane production, yet the effectiveness of these nutrients within coal beds is unknown. Here, we use downhole monitoring methods in combination with deuterated water (D 2 O) and a 200-liter injection of 0.1% yeast extract (YE) to stimulate and isotopically label newly generated methane. A total dissolved gas pressure sensor enabled real-time gas measurements (641 days preinjection and for 478 days postinjection). Downhole samples, collected with subsurface environmental samplers, indicate that methane increased 132% above preinjection levels based on isotopic labeling from D 2 O, 108% based on pressure readings, and 183% based on methane measurements 266 days postinjection. Demonstrating that YE enhances biogenic coalbed methane production in situ using multiple novel measurement methods has immediate implications for other field-scale biogenic methane investigations, including in situ methods to detect and track microbial activities related to the methanogenic turnover of recalcitrant carbon in the subsurface.

Montana↗
USGS2018

High frequency data exposes nonlinear seasonal controls on dissolved organic matter in a large watershed

We analyzed a five year, high frequency time series generated by an in situ fluorescent dissolved organic matter (fDOM) sensor installed near the Connecticut River’s mouth, investigating high temporal resolution DOM dynamics in a larger watershed and longer time series than previously addressed. We identified a gradient between large, saturating summer fDOM responses to discharge and linear, subdued responses during colder months. Seasonal response patterns were not consistent with multiple linear regression. Alternatively, we binned measurements across the yearly cycle using environmental indices, such as temperature, and applied moving regression, a novel approach which produced superior fits to calendar day binning. Spatially averaged watershed soil temperature at 10 cm was the best overall index of discharge-fDOM response. DOM fractionation showed fDOM was primarily a surrogate for hydrophobic organic acid (HPOA) concentrations. HPOAs were highly correlated with discharge, but hydrophilics (HPIs) were not. Discharge dependent DOM concentrations driven by the HPOA fraction may be controlled by soil temperature and water table position relative to organic and mineral soil horizons. HPI concentrations were correlated with average watershed soil temperature at 10 cm but were rather stationary throughout the year, further indicating a consistent groundwater source for this nonfluorescent DOM. We present a resolved subseasonal empirical model of DOM concentrations and fluxes, showing that riverine DOM flux and quality depend heavily on seasonal terrestrial carbon dynamics and hydrologic flow paths. High frequency monitoring reveals readily discernible patterns demonstrating that upland biogeochemical signals are maintained even at this large watershed scale.

Environmental Science and Technology↗
USGS2013

Understanding water column and streambed thermal refugia for endangered mussels in the Delaware River

Groundwater discharge locations along the upper Delaware River, both discrete bank seeps and diffuse streambed upwelling, may create thermal niche environments that benefit the endangered dwarf wedgemussel (Alasmidonta heterodon). We seek to identify whether discrete or diffuse groundwater inflow is the dominant control on refugia. Numerous springs and seeps were identified at all locations where dwarf wedgemussels still can be found. Infrared imagery and custom high spatial resolution fiber-optic distributed temperature sensors reveal complex thermal dynamics at one of the seeps with a relatively stable, cold groundwater plume extending along the streambed/water-column interface during mid-summer. This plume, primarily fed by a discrete bank seep, was shown through analytical and numerical heat-transport modeling to dominate temperature dynamics in the region of potential habitation by the adult dwarf wedgemussel.

Pennsylvania↗
USGS1998

Regional land cover characterization using Landsat thematic mapper data and ancillary data sources

As part of the activities of the Multi-Resolution Land Characteristics (MRLC) Interagency Consortium, an intermediate-scale land cover data set is being generated for the conterminous United States. This effort is being conducted on a region-by-region basis using U.S. Standard Federal Regions. To date, land cover data sets have been generated for Federal Regions 3 (Pennsylvania, West Virginia, Virginia, Maryland, and Delaware) and 2 (New York and New Jersey). Classification work is currently under way in Federal Region 4 (the southeastern United States), and land cover mapping activities have been started in Federal Regions 5 (the Great Lakes region) and 1 (New England). It is anticipated that a land cover data set for the conterminous United States will be completed by the end of 1999. A standard land cover classification legend is used, which is analogous to and compatible with other classification schemes. The primary MRLC regional classification scheme contains 23 land cover classes. The primary source of data for the project is the Landsat thematic mapper (TM) sensor. For each region, TM scenes representing both leaf-on and leaf-off conditions are acquired, preprocessed, and georeferenced to MRLC specifications. Mosaicked data are clustered using unsupervised classification, and individual clusters are labeled using aerial photographs. Individual clusters that represent more than one land cover unit are split using spatial modeling with multiple ancillary spatial data layers (most notably, digital elevation model, population, land use and land cover, and wetlands information). This approach yields regional land cover information suitable for a wide array of applications, including landscape metric analyses, land management, land cover change studies, and nutrient and pesticide runoff modeling.

Environmental Monitoring and Assessment↗
USGS1997

Review of electric and magnetic fields accompanying seismic and volcanic activity

New observations of magnetic, electric and electromagnetic field variations, possibly related to recent volcanic and seismic events, have been obtained on Mt. Unzen in Japan, Reunion Island in Indian Ocean, the Long Valley volcanic caldera in California, and for faults in China and Russia, California and several other locations. For volcanic events, contributions from different physical processes can be identified during the various eruption stages. Slow processes (weeks to months) include near-surface thermal demagnetization effects, piezomagnetic effects, and effects from rotation/displacement of magnetized material. Rapid processes (seconds to days) include piezomagnetic effects from instantaneous stress redistribution with explosive eruptions and electrokinetic effects from rupture of high pressure fluid compartments commonly encountered in volcanic regions. For seismic events, the observed coseismic offsets are instantaneous, provided care has been taken to ensure sensors are insensitive to seismic shaking and are in regions of low magnetic field gradient. Simple piezomagnetic dislocation models based on geodetically and seismically determined fault parameters generally match the observed signals in size and sign. Electrokinetic effects resulting from rupture of fluid filled compartments at hydrostatic to lithostatic pore pressures can generate transient signals in the frequency band 100 Hz to 0.01 Hz. However, large-scale fluid driven processes are not evident in near-field measurements in the epicentral region minutes to weeks before large earthquakes. The subset of ionospheric disturbances generated by trapped atmospheric pressure waves (also termed gravity waves and/or acoustic waves, traveling ionospheric disturbances or TID's) that are excited by earthquakes and volcanic eruptions are common and propagate to great distances. These are known and expected consequences of earthquakes, volcanic explosions (and other atmospheric disturbances), that must be identified and their effects removed from VLF/ULF electromagnetic field records before associating new observations of ionospheric disturbances with earthquake activity.

Surveys in Geophysics↗
USGS2003

Preliminary investigation of submerged aquatic vegetation mapping using hyperspectral remote sensing

The use of airborne hyperspectral remote sensing imagery for automated mapping of submerged aquatic vegetation (SAV) in the tidal Potomac River was investigated for near to realtime resource assessment and monitoring. Airborne hyperspectral imagery and field spectrometer measurements were obtained in October of 2000. A spectral library database containing selected ground-based and airborne sensor spectra was developed for use in image processing. The spectral library is used to automate the processing of hyperspectral imagery for potential real-time material identification and mapping. Field based spectra were compared to the airborne imagery using the database to identify and map two species of SAV (Myriophyllum spicatum and Vallisneria americana). Overall accuracy of the vegetation maps derived from hyperspectral imagery was determined by comparison to a product that combined aerial photography and field based sampling at the end of the SAV growing season. The algorithms and databases developed in this study will be useful with the current and forthcoming space-based hyperspectral remote sensing systems.

Environmental Monitoring and Assessment↗
USGS2000

Results of the Imager for Mars Pathfinder windsock experiment

The Imager for Mars Pathfinder (IMP) windsock experiment measured wind speeds at three heights within 1.2 m of the Martian surface during Pathfinder landed operations. These wind data allowed direct measurement of near-surface wind profiles on Mars for the first time, including determination of aerodynamic roughness length and wind friction speeds. Winds were light during periods of windsock imaging, but data from the strongest breezes indicate aerodynamic roughness length of 3 cm at the landing site, with wind friction speeds reaching 1 m/s. Maximum wind friction speeds were about half of the threshold-of-motion friction speeds predicted for loose, fine-grained materials on smooth Martian terrain and about one third of the threshold-of-motion friction speeds predicted for the same size particles over terrain with aerodynamic roughness of 3 cm. Consistent with this, and suggesting that low wind speeds prevailed when the windsock array was not imaged and/or no particles were available for aeolian transport, no wind-related changes to the surface during mission operations have been recognized. The aerodynamic roughness length reported here implies that proposed deflation of fine particles around the landing site, or activation of duneforms seen by IMP and Sojourner, would require wind speeds >28 m/s at the Pathfinder top windsock height (or >31 m/s at the equivalent Viking wind sensor height of 1.6 m) and wind speeds >45 m/s above 10 m. These wind speeds would cause rock abrasion if a supply of durable particles were available for saltation. Previous analyses indicate that the Pathfinder landing site probably is rockier and rougher than many other plains units on Mars, so aerodynamic roughness length elsewhere probably is less than the 3-cm value reported for the Pathfinder site.

Journal of Geophysical Research E: Planets↗
USGS2000

Seismic anisotropy of the shallow crust at the Juan de Fuca Ridge

Microearthquake data recorded on four ocean bottom seismometers are used to study shear-wave splitting on the Endeavour Segment of the Juan de Fuca Ridge. The covariance matrix decomposition method is used to determine the sensor orientation from explosive shot data and to estimate the anisotropy parameters for 238 earthquake records. At three of the four sites, the results show a remarkably consistent fast direction parallel to the ridge axis. The time delays between the fast and the slow waves range from 40 to 200 ms, with an average of 90 ms. They are not clearly related to earthquake range, focal depth or source-receiver azimuth. The splitting of the shear waves is interpreted as an effect of structural anisotropy due to the presence of ridge-parallel cracks in the shallow crust. If we assume that anisotropy is concentrated in the upper 1-2 km, the splitting times require a high crack density of ~0.1.

Geophysical Research Letters↗
USGS2000

Fracture process zone in granite

In uniaxial compression tests performed on Aue granite cores (diameter 50 mm, length 100 mm), a steel loading plate was used to induce the formation of a discrete shear fracture. A zone of distributed microcracks surrounds the tip of the propagating fracture. This process zone is imaged by locating acoustic emission events using 12 piezoceramic sensors attached to the samples. Propagation velocity of the process zone is varied by using the rate of acoustic emissions to control the applied axial force. The resulting velocities range from 2 mm/s in displacement-controlled tests to 2 μm/s in tests controlled by acoustic emission rate. Wave velocities and amplitudes are monitored during fault formation. P waves transmitted through the approaching process zone show a drop in amplitude of 26 dB, and ultrasonic velocities are reduced by 10%. The width of the process zone is ∼9 times the grain diameter inferred from acoustic data but is only 2 times the grain size from optical crack inspection. The process zone of fast propagating fractures is wider than for slow ones. The density of microcracks and acoustic emissions increases approaching the main fracture. Shear displacement scales linearly with fracture length. Fault plane solutions from acoustic events show similar orientation of nodal planes on both sides of the shear fracture. The ratio of the process zone width to the fault length in Aue granite ranges from 0.01 to 0.1 inferred from crack data and acoustic emissions, respectively. The fracture surface energy is estimated from microstructure analysis to be ∼2 J. A lower bound estimate for the energy dissipated by acoustic events is 0.1 J.

Journal of Geophysical Research B: Solid Earth↗
USGS2003

Use of hydraulic head to estimate volumetric gas content and ebullition flux in northern peatlands

Hydraulic head was overpressured at middepth in a 4.2‐m thick raised bog in the Glacial Lake Agassiz peatlands of northern Minnesota, and fluctuated in response to atmospheric pressure. Barometric efficiency (BE), determined by calculating ratios of change in hydraulic head to change in atmospheric pressure, ranged from 0.05 to 0.15 during July through November of both 1997 and 1998. The overpressuring and a BE response were caused by free‐phase gas contained primarily in the center of the peat column between two or more semielastic, semiconfining layers of more competent peat. Two methods were used to determine the volume of gas bubbles contained in the peat, one using the degree of overpressuring in the middepth of the peat, and the other relating BE to specific yield of the shallow peat. The volume of gas calculated from the overpressuring method averaged 9%, assuming that the gas was distributed over a 2‐m thick overpressured interval. The volume of gas using the BE method averaged 13%. Temporal changes in overpressuring and in BE indicate that the volume of gaseous‐phase gas also changed with time, most likely because of rapid degassing (ebullition) that allowed sudden loss of gas to the atmosphere. Estimates of gas released during the largest ebullition events ranged from 0.3 to 0.7 mol m −2 d −1 . These ebullition events may contribute a significant source of methane and carbon dioxide to the atmosphere that has so far largely gone unmeasured by gas‐flux chambers or tower‐mounted sensors.

Water Resources Research↗
USGS2007

Surface temperature patterns in complex terrain: Daily variations and long-term change in the central Sierra Nevada, California

A realistic description of how temperatures vary with elevation is crucial for ecosystem studies and for models of basin-scale snowmelt and spring streamflow. This paper explores surface temperature variability using temperature data from an array of 37 sensors, called the Yosemite network, which traverses both slopes of the Sierra Nevada in the vicinity of Yosemite National Park, California. These data indicate that a simple lapse rate is often a poor description of the spatial temperature structure. Rather, the spatial pattern of temperature over the Yosemite network varies considerably with synoptic conditions. Empirical orthogonal functions (EOFs) were used to identify the dominant spatial temperature patterns and how they vary in time. Temporal variations of these surface temperature patterns were correlated with large-scale weather conditions, as described by National Centers for Environmental Prediction-National Center for Atmospheric Research Reanalysis data. Regression equations were used to downscale larger-scale weather parameters, such as Reanalysis winds and pressure, to the surface temperature structure over the Yosemite network. These relationships demonstrate that strong westerly winds are associated with relatively warmer temperatures on the east slope and cooler temperatures on the west slope of the Sierra, and weaker westerly winds are associated with the opposite pattern. Reanalysis data from 1948 to 2005 indicate weakening westerlies over this time period, a trend leading to relatively cooler temperatures on the east slope over decadal timescale's. This trend also appears in long-term observations and demonstrates the need to consider topographic effects when examining long-term changes in mountain regions. Copyright 2007 by the American Geophysical Union.

Journal of Geophysical Research D: Atmospheres↗
USGS2007

Seismic detection and analysis of icequakes at Columbia Glacier, Alaska

Contributions to sea level rise from rapidly retreating marine-terminating glaciers are large and increasing. Strong increases in iceberg calving occur during retreat, which allows mass transfer to the ocean at a much higher rate than possible through surface melt alone. To study this process, we deployed an 11-sensor passive seismic network at Columbia Glacier, Alaska, during 2004–2005. We show that calving events generate narrow-band seismic signals, allowing frequency domain detections. Detection parameters were determined using direct observations of calving and validated using three statistical methods and hypocenter locations. The 1–3 Hz detections provide a good measure of the temporal distribution and size of calving events. Possible source mechanisms for the unique waveforms are discussed, and we analyze potential forcings for the observed seismicity.

Journal of Geophysical Research↗
USGS2009

Technological advances in suspended‐sediment surrogate monitoring

Surrogate technologies to continuously monitor suspended sediment show promise toward supplanting traditional data collection methods requiring routine collection and analysis of water samples. Commercially available instruments operating on bulk optic (turbidity), laser optic, pressure difference, and acoustic backscatter principles are evaluated based on cost, reliability, robustness, accuracy, sample volume, susceptibility to biological fouling, and suitable range of mass concentration and particle size distribution. In situ turbidimeters are widely used. They provide reliable data where the point measurements can be reliably correlated to the river's mean cross section concentration value, effects of biological fouling can be minimized, and concentrations remain below the sensor's upper measurement limit. In situ laser diffraction instruments have similar limitations and can cost 6 times the approximate $5000 purchase price of a turbidimeter. However, laser diffraction instruments provide volumetric‐concentration data in 32 size classes. Pressure differential instruments measure mass density in a water column, thus integrating substantially more streamflow than a point measurement. They are designed for monitoring medium‐to‐large concentrations, are generally unaffected by biological fouling, and cost about the same as a turbidimeter. However, their performance has been marginal in field applications. Acoustic Doppler profilers use acoustic backscatter to measure suspended sediment concentrations in orders of magnitude more streamflow than do instruments that rely on point measurements. The technology is relatively robust and generally immune to effects of biological fouling. Cost of a single‐frequency device is about double that of a turbidimeter. Multifrequency arrays also provide the potential to resolve concentrations by clay silt versus sand size fractions. Multifrequency hydroacoustics shows the most promise for revolutionizing collection of continuous suspended sediment data by instruments that require only periodic calibration for correlation to mean concentrations in river cross sections. Broad application of proven suspended sediment surrogate technologies has the potential to revolutionize fluvial sediment monitoring. Once applied, benefits could be enormous, providing for safer, more frequent and consistent, arguably more accurate, and ultimately less expensive sediment data for managing the world's sedimentary resources.

Water Resources Research↗
USGS2011

Improving stream studies with a small-footprint green lidar

Technology is changing how scientists and natural resource managers describe and study streams and rivers. A new generation of airborne aquatic-terrestrial lidars is being developed that can penetrate water and map the submerged topography inside a stream as well as the adjacent subaerial terrain and vegetation in one integrated mission. A leading example of these new cross-environment instruments is the Experimental Advanced Airborne Research Lidar (EAARL), a NASAbuilt sensor now operated by the U.S. Geological Survey (USGS) [Wright and Brock, 2002].

Eos, Transactions, American Geophysical Union↗
USGS2010

The perfect debris flow? Aggregated results from 28 large-scale experiments

Aggregation of data collected in 28 controlled experiments reveals reproducible debris-flow behavior that provides a clear target for model tests. In each experiment ∼10 m 3 of unsorted, water-saturated sediment composed mostly of sand and gravel discharged from behind a gate, descended a steep, 95-m flume, and formed a deposit on a nearly horizontal runout surface. Experiment subsets were distinguished by differing basal boundary conditions (1 versus 16 mm roughness heights) and sediment mud contents (1 versus 7 percent dry weight). Sensor measurements of evolving flow thicknesses, basal normal stresses, and basal pore fluid pressures demonstrate that debris flows in all subsets developed dilated, coarse-grained, high-friction snouts, followed by bodies of nearly liquefied, finer-grained debris. Mud enhanced flow mobility by maintaining high pore pressures in flow bodies, and bed roughness reduced flow speeds but not distances of flow runout. Roughness had these effects because it promoted debris agitation and grain-size segregation, and thereby aided growth of lateral levees that channelized flow. Grain-size segregation also contributed to development of ubiquitous roll waves, which had diverse amplitudes exhibiting fractal number-size distributions. Despite the influence of these waves and other sources of dispersion, the aggregated data have well-defined patterns that help constrain individual terms in a depth-averaged debris-flow model. The patterns imply that local flow resistance evolved together with global flow dynamics, contradicting the hypothesis that any consistent rheology applied. We infer that new evolution equations, not new rheologies, are needed to explain how characteristic debris-flow behavior emerges from the interactions of debris constituents.

Journal of Geophysical Research F: Earth Surface↗
USGS2010

Use of electrical imaging and distributed temperature sensing methods to characterize surface water–groundwater exchange regulating uranium transport at the Hanford 300 Area, Washington

We explored the use of continuous waterborne electrical imaging (CWEI), in conjunction with fiber‐optic distributed temperature sensor (FO‐DTS) monitoring, to improve the conceptual model for uranium transport within the Columbia River corridor at the Hanford 300 Area, Washington. We first inverted resistivity and induced polarization CWEI data sets for distributions of electrical resistivity and polarizability, from which the spatial complexity of the primary hydrogeologic units was reconstructed. Variations in the depth to the interface between the overlying coarse‐grained, high‐permeability Hanford Formation and the underlying finer‐grained, less permeable Ringold Formation, an important contact that limits vertical migration of contaminants, were resolved along ∼3 km of the river corridor centered on the 300 Area. Polarizability images were translated into lithologic images using established relationships between polarizability and surface area normalized to pore volume ( S por ). The FO‐DTS data recorded along 1.5 km of cable with a 1 m spatial resolution and 5 min sampling interval revealed subreaches showing (1) temperature anomalies (relatively warm in winter and cool in summer) and (2) a strong correlation between temperature and river stage (negative in winter and positive in summer), both indicative of reaches of enhanced surface water–groundwater exchange. The FO‐DTS data sets confirm the hydrologic significance of the variability identified in the CWEI and reveal a pattern of highly focused exchange, concentrated at springs where the Hanford Formation is thickest. Our findings illustrate how the combination of CWEI and FO‐DTS technologies can characterize surface water–groundwater exchange in a complex, coupled river‐aquifer system.

Washington↗
USGS2012

Sediment entrainment by debris flows: In situ measurements from the headwaters of a steep catchment

Debris flows can dramatically increase their volume, and hence their destructive potential, by entraining sediment. Yet quantitative constraints on rates and mechanics of sediment entrainment by debris flows are limited. Using an in situ sensor network in the headwaters of a natural catchment we measured flow and bed properties during six erosive debris-flow events. Despite similar flow properties and thicknesses of bed sediment entrained across all events, time-averaged entrainment rates were significantly faster for bed sediment that was saturated prior to flow arrival compared with rates for sediment that was dry. Bed sediment was entrained from the sediment-surface downward in a progressive fashion and occurred during passage of dense granular fronts as well as water-rich, inter-surge flow. En masse failure of bed sediment along the sediment-bedrock interface was never observed. Large-magnitude, high-frequency fluctuations in total normal basal stress were dissipated within the upper 5 cm of bed sediment. Within this near surface layer, concomitant fluctuations in Coulomb frictional resistance are expected, irrespective of the influence of pore fluid pressure or fluctuations in shear stress. If the near-surface sediment was wet as it was overridden by a flow, additional large-magnitude, high-frequency pore pressure fluctuations were measured in the near-surface bed sediment. These pore pressure fluctuations propagated to depth at subsonic rates and in a diffusive manner. The depth to which large excess pore pressures propagated was typically less than 10 cm, but scaled as ( D / f i ) 0.5 , in which D is the hydraulic diffusivity and f i is the frequency of a particular pore pressure fluctuation. Shallow penetration depths of granular-normal-stress fluctuations and excess pore pressures demonstrate that only near-surface bed sediment experiences the full dynamic range of effective-stress fluctuations, and as a result, can be more easily entrained than deeper sediment. These data provide robust tests for mechanical models of entrainment and demonstrate that a debris flow over wet bed sediment will be larger than the same flow over dry bed sediment.

Colorado↗
USGS2011

The USGS geomagnetism program and its role in space weather monitoring

Magnetic storms result from the dynamic interaction of the solar wind with the coupled magnetospheric-ionospheric system. Large storms represent a potential hazard for the activities and infrastructure of a modern, technologically based society [Baker et al., 2008]; they can cause the loss of radio communications, reduce the accuracy of global positioning systems, damage satellite electronics and affect satellite operations, increase pipeline corrosion, and induce voltage surges in electric power grids, causing blackouts. So while space weather starts with the Sun and is driven by the solar wind, it is on, or just above, the surface of the Earth that the practical effects of space weather are realized. Therefore, ground-based sensor networks, including magnetic observatories [Love, 2008], play an important role in space weather monitoring.

Space Weather↗