Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Sedimentary Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54Linked to original sources
USGS1980

Geology and biology of Oceanographer submarine canyon.

Santonian beds more than 100 m thick are the oldest rocks collected from the canyon. Quaternary silty clay veneers the canyon walls in many places and is commonly burrowed by benthic organisms that cause extensive erosion of the canyon walls, especially in the depth zone (100-1300 m) inhabited by the crabs Geryon and Cancer. Bioerosion is minimal on high, near-vertical cliffs of sedimentary rock, in areas of continual sediment movement, and where the sea floor is paved by gravel. A thin layer of rippled, unconsolidated silt and sand is commonly present on the canyon walls and in the axis. Shelf sediments are transported from Georges Bank over the E rim and in the Canyon by the SW drift and storm currents; tidal currents and internal waves move the sediment downcanyon along the walls and axis.- from Authors

Marine Geology↗
USGS2019

Lithospheric signature of late Cenozoic extension in electrical resistivity structure of the Rio Grande rift, New Mexico, USA

We present electrical resistivity models of the crust and upper mantle from two‐dimensional (2‐D) inversion of magnetotelluric (MT) data collected in the Rio Grande rift, New Mexico, USA. Previous geophysical studies of the lithosphere beneath the rift identified a low‐velocity zone several hundred kilometers wide, suggesting that the upper mantle is characterized by a very broad zone of modified lithosphere. In contrast, the surface expression of the rift (e.g., high‐angle normal faults and synrift sedimentary units) is confined to a narrow region a few tens of kilometers wide about the rift axis. MT data are uniquely suited to probing the depths of the lithosphere that fill the gap between surface geology and body wave seismic tomography, namely the middle to lower crust and uppermost mantle. We model the electrical resistivity structure of the lithosphere along two east‐west trending profiles straddling the rift axis at the latitudes of 36.2 and 32.0°N. We present results from both isotropic and anisotropic 2‐D inversions of MT data along these profiles, with a strong preference for the latter in our interpretation. A key feature of the anisotropic resistivity modeling is a broad (~200‐km wide) zone of enhanced conductivity (<20 Ωm) in the middle to lower crust imaged beneath both profiles. We attribute this lower crustal conductor to the accumulation of free saline fluids and partial melt, a direct result of magmatic activity along the rift. High‐conductivity anomalies in the midcrust and upper mantle are interpreted as fault zone alteration and partial melt, respectively.

New Mexico↗
USGS2017

Rare earth mineral potential in the southeastern U.S. Coastal Plain from integrated geophysical, geochemical, and geological approaches

We combined geophysical, geochemical, mineralogical, and geological data to evaluate the regional presence of rare earth element (REE)−bearing minerals in heavy mineral sand deposits of the southeastern U.S. Coastal Plain. We also analyzed regional differences in these data to determine probable sedimentary provenance. Analyses of heavy mineral separates covering the region show strong correlations between thorium, monazite, and xenotime, suggesting that radiometric equivalent thorium (eTh) can be used as a geophysical proxy for those REE-bearing minerals. Airborne radiometric data collected during the National Uranium Resource Evaluation (NURE) program cover the southeastern United States with line spacing varying from ∼2 to 10 km. These data show eTh highs over Cretaceous and Tertiary Coastal Plain sediments from the Cape Fear arch in North Carolina to eastern Alabama; these highs decrease with distance from the Piedmont. Quaternary sediments along the modern coasts show weaker eTh anomalies, except near coast-parallel ridges from South Carolina to northern Florida. Prominent eTh anomalies are also observed over large riverbeds and their floodplains, even north of the Cape Fear arch where surrounding areas are relatively low. These variations were verified using ground geophysical measurements and sample analyses, indicating that radiometric methods are a useful exploration tool at varying scales. Further analyses of heavy mineral separates showed regional differences, not only in concentrations of monazite, but also of rutile and staurolite, and in magnetic susceptibility. The combined properties suggest the presence of subregions where heavy mineral sediments are primarily sourced from high-grade metamorphic, low-grade metamorphic, or igneous terrains, or where they represent a mixing of these sources. Comparisons between interpreted sources of heavy mineral sands near the Fall Line and igneous and metamorphic Piedmont and Blue Ridge units showed a strong correspondence with rocks closest to the Fall Line and poor correspondence with rocks farther inland. This strongly suggests that the primary source of those heavy minerals, especially monazite, is the rocks that formed the rocky coast that was present during opening of the Atlantic Ocean, which in turn indicates the importance of coastal processes in forming heavy mineral sand concentrations. Furthermore, narrow radiometric eTh and K anomalies are associated with major rivers, indicating limited spatial influence of fluvial processes. Later coastal plain sediment deposition appears to have involved reworking of sediments, providing an “inheritance” of the rocky coast composition that persists for some distance from the Fall Line. However, this inheritance is reduced with distance, and sediments within ∼100 km of the coast in Georgia and Florida exhibit properties indicative of mixing from multiple sources.

GSA Bulletin↗
USGS2011

Sedimentary response to orogenic exhumation in the northern Rocky Mountain Basin and Range province, Flint Creek basin, west-central Montana

Middle Eocene through Upper Miocene sedimentary and volcanic rocks of the Flint Creek basin in western Montana accumulated during a period of significant paleoclimatic change and extension across the northern Rocky Mountain Basin and Range province. Gravity modelling, borehole data, and geologic mapping from the Flint Creek basin indicate that subsidence was focused along an extensionally reactivated Sevier thrust fault, which accommodated up to 800 m of basin fill while relaying stress between the dextral transtensional Lewis and Clark lineament to the north and the Anaconda core complex to the south. Northwesterly paleocurrent indicators, foliated metamorphic lithics, 64 Ma (40Ar/39Ar) muscovite grains, and 76 Ma (U-Pb) zircons in a ca. 27 Ma arkosic sandstone are consistent with Oligocene exhumation and erosion of the Anaconda core complex. The core complex and volcanic and magmatic rocks in its hangingwall created an important drainage divide during the Paleogene shedding detritus to the NNW and ESE. Following a major period of Early Miocene tectonism and erosion, regional drainage networks were reorganized such that paleoflow in the Flint Creek basin flowed east into an internally drained saline lake system. Renewed tectonism during Middle to Late Miocene time reestablished a west-directed drainage that is recorded by fluvial strata within a Late Miocene paleovalley. These tectonic reorganizations and associated drainage divide explain observed discrepancies in provenance studies across the province. Regional correlation of unconformities and lithofacies mapping in the Flint Creek basin suggest that localized tectonism and relative base level fluctuations controlled lithostratigraphic architecture.

Canadian Journal of Earth Sciences↗
USGS2016

Mineral thermometry and fluid inclusion studies of the Pea Ridge iron oxide-apatite–rare earth element deposit, Mesoproterozoic St. Francois Mountains Terrane, southeast Missouri, USA

Mineral thermometry and fluid inclusion studies were conducted on variably altered and mineralized samples from the Mesoproterozoic Pea Ridge iron oxide-apatite (IOA)-rare earth element (REE) deposit in order to constrain P-T conditions, fluid chemistry, and the source of salt and volatiles during early magnetite and later REE mineralization. Scanning electron microscopy (SEM)-cathodoluminescence and SEM-backscatter electron images show that quartz and rutile precipitated before, during, and after magnetite and REE mineral growth. Ti-in-quartz and Zr-in-rutile equilibration temperatures range from ≤350° to 750°C in the amphibole, magnetite, hematite, and silicified zones where T increased during magnetite and quartz growth and dropped precipitously after fracturing and brecciation. Late drusy quartz cements within a REE-rich breccia pipe record the lowest T (≤315°–400°C). Liquid-, vapor-rich, and hypersaline (±hematite, calcite) fluid inclusions are common and liquid CO 2 is present locally. Salinities define three populations: saline (10–27 wt % NaCl equiv), hypersaline (34–>60 wt % NaCl equiv), and dilute (0–10 wt % NaCl equiv ). The wide range of eutectic melting temperatures (−67° to −19°C) suggests that saline inclusions trapped variable proportions of a CaCl-MgCl-FeCl-bearing fluid end member and an NaCl-KCl fluid end member. Homogenization temperatures and pressures of these saline inclusions suggest they were trapped when fluids unmixed into brine and vapor at T <350°C, P <15 MPa, and a depth of ~1.5 km. Hypersaline inclusions were trapped at low T and P (~200°C and ~1 MPa) along the V + L + H curve when the system vented to the paleosurface. Data for dilute inclusions in late drusy quartz from the REE-rich breccia pipe are indicative of a boiling epithermal environment. The Na/Cl, Na/K, and Cl/Br ratios of fluid inclusion extracts provide evidence for mixtures of magmatic hydrothermal fluids and evaporated seawater. Extracts from magnetite, hematite, and pyrite plot in the magmatic-hydrothermal field, indicating that Fe was derived from a magmatic source. Their enrichments in Mg and Ca are consistent with a mafic magmatic source. The positive correlation between Na/Mg and Na/Ca ratios may be due to halite saturation or albitization of igneous rocks. Extracts from barite in the REE-rich breccia pipes are enriched in Na and Br and plot near the seawater evaporation trend. He is highly enriched relative to Ne and Ar in fluid inclusion extracts, which precludes air as a source of He. Although the He is mostly of crustal origin, pyrite with a 3 He/ 4 He (R/R A ) of 0.1 contains up to 12% mantle He. Many extracts have low 20 Ne/ 22 Ne ratios due to nucleogenic production of 22 Ne in high F/O minerals such as fluorapatite or F biotite. The arrays of data for 3 He/ 4 He (R/R A ) and 22 Ne/ 20 Ne suggest that volatiles were derived from two sources, a moderate F mafic magma containing mantle He and a high F silicic magma with crustal He. Together with other evidence cited in this report, these data (1) support a magmatic hydrothermal origin for the Mesoproterozoic magnetite-apatite deposit with ore fluids derived from a concealed mafic to intermediate-composition intrusion, (2) suggest that the REE minerals in breccia pipes were either derived from apatite or precipitated in response to decompression and cooling during breccia pipe formation, (3) provide evidence for the influx of basinal brine, magmatic fluids from granitic intrusions, and meteoric water after breccia pipe formation, and (4) show that Pea Ridge was relatively unaffected by the late Paleozoic Mississippi Valley-type (MVT) Pb-Zn system in overlying Cambrian sedimentary rocks.

Missouri↗
USGS1996

Significance of tourmaline-rich rocks in the North Range group of the Cuyuna iron range, east-central Minnesota

Concentrations of tourmaline in Early Proterozoic metasedimentary rocks of the Cuyuna iron range, east-central Minnesota, provide a basis for redefinition of the evolutionary history of the area. Manganiferous iron ore forms beds within the Early Proterozoic Trommald Formation, between thick-bedded granular iron-formation having shallow-water alepositional attributes and thin-bedded, nongranular iron-formation having deeper water attributes. These manganese-rich units were previously assumed to be sedimentary in origin. However, a reevaluation of drill core and mine samples from the Cuyuna North range has identified strata-bound tourmaline and tourmalinite, which has led to a rethinking of genetic models for the geology of the North range. We interpret the tourmaline-rich rocks of the area to be a product of submarine-hydrothermal solutions flowing along and beneath the sediment-seawater interface. This model for the depositional environment of the tourmaline is supported by previously reported mineral assemblages within the Trommald Formation that comprise aegirine; barium feldspar; manganese silicates, carbonates, and oxides; and Sr-rich barite veins.In many places, tourmaline-rich metasedimentary rocks and tourmalinites are associated locally with strata-bound sulfide deposits. At those localities, the tourmaline-rich strata are thought to be lateral equivalents of exhalative sulfide zones or genetically related subsea-floor replacements. On the basis of the occurrence of the tourmaline-rich rocks and tourmalinites, and on the associated minerals, we suggest that there is a previously unrecognized potential for sediment-hosted sulfide deposits in the Cuyuna North range.

Economic Geology↗
USGS1963

Bedrock Geology and Asbestos Deposits of the Upper Missisquoi Valley and Vicinity, Vermont

The upper Missisquoi Valley and vicinity as described in this report covers an area of about 250 square miles at the headwaters of the Missisquoi River in north-central Vermont. About 90 percent of the area is forested and the remainder is chiefly farm land. The topography reflects the geologic structure and varied resistance of the bedrock to erosion. Most of the area is on the east limb of the Green Mountain anticlinorium, which is the principal structural feature of Vermont. The bedrock is predominantly sedimentary and volcanic rock that has been regionally metamorphosed. It was intruded before metamorphism by mafic and ultramafic igneous rocks, and after metamorphism by felsic and mafic igneous rocks. The metamorphosed sedimentary and volcanic rocks range in age from Cambrian(?) to Middle Silurian, the intrusive igneous rocks from probably Late Ordovician to probably late Permian. Metamorphism and principal folding in the region occurred in Middle Devonian time. The metamorphosed sedimentary and volcanic rocks make up a section at least 25,000 feet thick and can be divided into nine formations. The Hazens Notch formation of Cambrian(?) and Early Cambrian age is characterized by carbonaceous schist. It is succeeded in western parts of the area by the Jay Peak formation of Early Cambrian age, which is chiefly a schist that is distinguished by the general absence of carbonaceous zones; in central parts of the area the Hazens Notch formation is followed by the Belvidere Mountain amphibolite, probably the youngest of the formations of Early Cambrian age. The Ottauquechee formation, composed of carbonaceous phyllite and quartzite, and phyllitic graywacke, is of Middle Cambrian age. The Stowe formation of Late Cambrian(?) and Early(?) Ordovician age overlies the Ottauquechee and is predominantly noncarbonaceous schist, though it also contains greenstone and carbonaceous schist and phyllite. The Umbrella Hill formation of Middle Ordovician age is characteristically a conglomerate in which the mineral chloritoid is common. The overlying Moretown formation, also of Middle Ordovician age, contains granulite and slate, also greenstone and amphibolite of the Coburn Hill volcanic member. The Shaw Mountain formation, made up of conglomerate, phyllite, and limestone, is the oldest Silurian unit. The Shaw Mountain formation is succeeded by the Northfield slate of Middle Silurian age. The igneous rocks of the region include various ultramafic plutonic rocks, such as dunite, peridotite, and serpentinite, probably of Late Ordovician age; sills and nearly concordant dikes of metagabbro of Late Ordovician age; biotite granite plutons or Middle or Late Devonian age, most notably on Eltey Mountain; and hypabyssallamprophyre, probably of late Permian age. Metamorphic zoning is shown by the distribution of rocks of the epidote-amphibolite facies and the greenschist facies in and near the Green Mountains, and near Coburn Hill and Eltey Mountain. Metasomatism related to regional metamorphism has produced porphyroblasts and quartz segregations in the sedimentary and volcanic rocks, and steatitization and carbonatization of serpentinite. Contact metamorphism has formed rocks of the epidote-amphibolite facies near granite plutons, and probably calc-silicate rock at the contacts of ultramafic plutons. The axial anticline of the Green Mountain anticlinorium and other anticlines and synclines to the east are the major longitudinal structural features of the area. These structures are complicated by transverse folds, particularly a syncline in the vicinity of Tillotson Peak. Early minor cross folds that are best developed in the Hazens Notch formation are believed to be genetically related to the transverse folds. The axial planes of the cross folds are folded about the axes of the later longitudinal folds of the Green Mountain anticlinorium. The longitudinal and transverse fold systems probably formed in the same episode of defor

Bulletin↗
USGS1987

Mineral Resources of the Antelope Wilderness Study Area, Nye County, Nevada

At the request of the U.S. Bureau of land Management, 83,100 acres of the Antelope Wilderness Study Area (NV-4)60-231/241) was studied. In this report the studied area is called the 'wilderness study area', or simply the 'study area.' No identified mineral or energy resources occur within the study area. The southern part of the area has moderate mineral resource potential for undiscovered gold and silver, and the Woodruff Formation in the southern part of the area has high resource potential for undiscovered vanadium, zinc, selenium, molybdenum, and silver (fig. 1). This assessment is based on field geochemical studies in 1984 and 1985 by the U.S. Bureau of Mines and field geochemical studies and geologic mapping by the U.S. Geological Survey in 1984 and 1985. The remainder of the study area has low resource potential for undiscovered gold, silver, lead, zinc, manganese, tin, and molybdenum. The study area also has low resource potential for undiscovered oil and gas resources. The Antelope Wilderness Study Area is about midway between Tonopah and Eureka, Nev., in the northern Hot Creek Range and southern Antelope Range of central Nevada. It is accessible by unimproved dirt roads extending 20 mi (miles) north from U.S. Highway 6 and 40 mi south from U.S. Highway 50 (fig. 2). Most of the study area consists of rugged mountainous terrain having approximately 2,600 ft (feet) of relief. The mountain range is a block tilted gently to the east and bounded on both sides by normal faults that dip steeply to moderately west and have major displacements. Most of the study area is underlain by a thick sequence of Tertiary volcanic rocks that predominantly consist of silicic ash-flow tuff, the Windous Butte Formation. Paleozoic and lower Mesozoic (see geologic time chart in appendix) marine sediments occur along the southern margin of the study area, and lower Paleozoic rocks are exposed in the northeast corner. The areas of exposed Paleozoic-Mesozoic rocks along the southern margin of the study area have moderate mineral resource potential for gold and silver in sediment-hosted, disseminated, epithermal (low-temperature) gold-silver deposits (fig. 1). These rocks consist of folded and thrust-faulted, fine-grained clastic sediments and limestone and dolomite that locally have been brecciated and hydrothermally altered. The alteration (locally, strong silicification) and geochemical associations of these rocks indicate a favorable environment for such deposits. Exploration for disseminated gold deposits in the same geologic environment is currently being conducted just south of the study area. The remainder of the study area has low resource potential for epithermal gold and silver vein deposits in the Tertiary volcanic rocks. The Cenozoic sedimentary basins adjacent to the fault-bounded mountain block have moderate potential for petroleum resources; the study area itself has low potential for petroleum resources.

Bulletin↗
USGS2001

Petroleum geology and resources of the middle Caspian Basin, Former Soviet Union

The Middle Caspian basin occupies a large area between the Great Caucasus foldbelt and the southern edge of the Precambrian Russian craton. The basin also includes the central part of the Caspian Sea and the South Mangyshlak subbasin east of the sea. The basin was formed on the Hercynian accreted terrane during Late Permian?Triassic through Quaternary time. Structurally, the basin consists of the fold-and-thrust zone of the northern Caucasus foothills, the foredeep and foreland slope, the Stavropol-Prikumsk uplift and East Manych trough to the north of the slope, and the South Mangyshlak subbasin and slope of the Karabogaz arch east of the Caspian Sea. All these major structures extend offshore. Four total petroleum systems (TPS) have been identified in the basin. The South Mangyshlak TPS contains more than 40 discovered fields. The principal reserves are in Lower?Middle Jurassic sandstone reservoirs in structural traps. Source rocks are poorly known, but geologic data indicate that they are in the Triassic taphrogenic sequence. Migration of oil and gas significantly postdated maturation of source rocks and was related to faulting and fracturing during middle Miocene to present time. A single assessment unit covers the entire TPS. Largest undiscovered resources of this assessment unit are expected in the largely undrilled offshore portion of the TPS, especially on the western plunge of the Mangyshlak meganticline. The Terek-Caspian TPS occupies the fold-and-thrust belt, foredeep, and adjoining foreland slope. About 50 hydrocarbon fields, primarily oil, have been discovered in the TPS. Almost all hydrocarbon reserves are in faulted structural traps related to thrusting of the foldbelt, and most traps are in frontal edges of the thrust sheets. The traps are further complicated by plastic deformation of Upper Jurassic salt and Maykop series (Oligocene? lower Miocene) shale. Principal reservoirs are fractured Upper Cretaceous carbonates and middle Miocene sandstones. Principal source rocks are organic-rich shales in the lower part of the Maykop series. Source rocks may also be present in the Eocene, Upper Jurassic, and Middle Jurassic sections, but their contribution to discovered reserves is probably small. Three assessment units are delineated in the TPS. One of them encompasses the thrust-and-fold belt of northern Caucasus foothills. This assessment unit contains most of the undiscovered oil resources. The second assessment unit occupies the foredeep and largely undeformed foreland slope. Undiscovered resources of this unit are relatively small and primarily related to stratigraphic traps. The third unit is identified in almost untested subsalt Jurassic rocks occurring at great depths and is speculative. The unit may contain significant amounts of gas under the Upper Jurassic salt seal. The Stavropol-Prikumsk TPS lies north of the Terek-Caspian TPS and extends offshore into the central Caspian Sea where geologic data are scarce. More than one hundred oil and gas fields have been found onshore. Offshore, only one well was recently drilled, and this well discovered a large oil and gas field. Almost the entire sedimentary section of the TPS is productive; however, the principal oil reserves are in Lower Cretaceous clastic reservoirs in structural traps of the Prikumsk uplift. Most original gas reserves are in Paleogene reservoirs of the Stavropol arch and these reservoirs are largely depleted. At least three source rock formations, in the Lower Triassic, Middle Jurassic, and Oligocene?lower Miocene (Maykop series), are present in the TPS. Geochemical data are inadequate to correlate oils and gases in most reservoirs with particular source rocks, and widespread mixing of hydrocarbons apparently took place. Three assessment units encompassing the onshore area of the TPS, the offshore continuation of the Prikumsk uplift, and the central Caspian area, are identified. The

Bulletin↗
USGS1953

Geology of the Naturita NW quadrangle, Colorado

The Naturita NW quadrangle is one of eighteen 7 1/2-minute quadrangles covering the principal carnotite-producing area of southwestern Colorado. The geology of these quadrangles were mapped by the U.S. Geological Survey on behalf of the U.S. Atomic Energy Commission as part of a comprehensive study of carnotite deposits. The rocks exposed in the eighteen quadrangles consist of crystalline rocks of pre-Cambrian age and sedimentary rocks that range in age from late Paleozoic to Quaternary. Over much of the area the sedimentary rocks are flat lying, but in places the rocks are disrupted by high-angle faults, and northwest-trending folds. Conspicuous among the folds are large anticlines having cores of intrusive salt and gypsum. Most of the carnotite deposits are confined to the Salt Wash sandstone member of the Jurassic Morrison formation. Within this sandstone, most of the deposits are spottily distributed through an arcuate zone known as the "Uravan Mineral Belt". Individual deposits range in size from irregular masses containing only a few tons of ore to large, tabular masses containing many thousands of tons. The ore consists largely of sandstone selectively impregnated and in part replaced by uranium and vanadium minerals. Most of the deposits appear ro be related to certain sedimentary structures in sandstones of favorable composition.

Colorado↗
USGS1977

Geology of the Monterey Bay region

Geophysical data and sea floor samples collected from the continental shelf and slope between Ano Nuevo Point and Point Sur, California indicate that the Monterey Bay region has had a complex late Cenozoic tectonic history. Uplift and depression have produced a succession of regressive and transgressive sedimentary units, while contemporaneous right-slip along faults of the San Andreas system have offset major structural and lithologic elements. This deformation produced three regional and several local unconformities within upper Tertiary rocks and initiated development of a canyon system that today includes the Monterey, Ascension, Carmel, and other large submarine canyons. The Tertiary stratigraphy of the offshore Monterey Bay area is divided into two provinces by a major structural boundary, the north-trending Palo Colorado-San Gregorio fault zone. East of this zone in the offshore are four seismically distinct sequences that can be correlated with major sequences onshore. These sequences comprise (1) pre-Tertiary basement, and (2) middle Miocene, (3) upper Miocene to Pliocene, and (4) upper Pliocene to Holocene sedimentary intervals. Each of the latter three sequences is bounded by unconformities, as is its counterpart on land. Only Neogene sedimentary rocks are present offshore; Paleogene units, if originally present, have been removed completely by pre-middle Miocene erosion. An extensive erosional surface was cut during Zemorrian time into the late Mesozoic granitic basement rocks. Incised into this surface are the ancestral Monterey Canyon and an unnamed canyon. Marine sedimentary rocks of upper Miocene and Pliocene age overlie this unconformably and fill the unnamed canyon. Similar rocks also may have once filled Monterey Canyon. Near shore these strata are covered by terrestrial alluvial and eolian deposits, deltaic deposits, marine canyon fill, landslide and slump deposits, and unconsolidated sediments that range in age from upper Pliocene to Holocene. Monterey Canyon appears to have been filled and exhumed at least twice since its inception in Oligocene time, once in late Miocene and once in Pleistocene time. Three major seismic stratigraphic units are apparent in continuous seismic reflection profiles from the offshore area west of the Palo Colorado-San Gregorio fault zone. These are (1) acoustical basement, and (2) middle Tertiary and (3) late Tertiary to Quaternary sedimentary intervals. Acoustical basement comprises Cretaceous to early Tertiary sedimentary rocks, Mesozoic or older metamorphic rocks, and Cretaceous or Jurassic rocks of the Franciscan assemblage. The middle Tertiary sequence consists of sedimentary rocks of questionable Miocene age. The late Tertiary to Quaternary sequence is composed of Pliocene sedimentary rocks and unconsolidated marine sediments, and submarine landslide and slump deposits. Seismic reflection surveys indicate two major, intersecting, northwest-trending fault zones to be present in the offshore Monterey Bay area. The Palo Colorado-San Gregorio fault zone may be more than 200 km long; it is narrow (approximately 3 km wide) and is represented in most places by one or two faults. This zone appears to connect with faults mapped on land near Ano Nuevo Point and Point Sur. The Monterey Bay fault zone, located in the area between Santa Cruz and Monterey, is a diffuse zone, approximately 10 to 15 km wide, of en echelon faults. Faults within this zone appear to connect with faults on land near Monterey, and the zone appears to be truncated by the Palo Colorado-San Gregorio fault zone west of Santa Cruz. Locations of more than 110 earthquakes (1968-1976) show that the newly mapped fault zones in Monterey Bay are seismically active. Epicenters in the bay form two clusters, one at the intersection of the Monterey Bay and Palo Colorado-San Gregorio fault zones, and the other in a linear belt that trends northwest along the Palo Colorado-San Gregorio fault zone. Faults within th

California↗
USGS1963

Geology of the Three Forks quadrangle, Montana, with sections on petrography of igneous rocks

The Three Forks quadrangle at the head of the Missouri River, has a long stratigraphic succession. The oldest rocks are Precambrian gneiss, derived from arkosic sandstone, and amphibolite, probably altered from mafic sills and lava flows. The unmetamorphosed sedimentary rocks range in age from late Precambrian to Recent, have an aggregate thickness of about 11,000 feet, and underlie about 85 percent of the quadrangle. The only systems not represented are Ordovician, Silurian, and Triassic.

Montana↗
USGS1960

Geology and ground-water resources of the Rawlins area, Carbon County, Wyoming

The Rawlins area in west-central Carbon County, south-central Wyoming includes approximately 634 square miles of plains and valleys grading into relatively rugged uplifts. The climate is characterized by low precipitation, rapid evaporation, and a wide range of temperature. Railroading and ranching are the principal occupations in the area. The exposed rocks in the area range in age from Precambrian through Recent. The older formations are exposed in the uplifted parts, the oldest being exposed along the apex of the Rawlins uplift. The formations dip sharply away from the anticlines and other uplifts and occur in the subsurface throughout the remainder of the area. The Cambrian rocks (undifferentiated), Madison limestone, Tensleep sandstone, Sun dance formation, Cloverly formation, Frontier formation, and Miocene and Pliocene rocks (undifferentiated) yield water to domestic and stock wells in the area. In the vicinity of the Rawlins uplift, the rocks of Cambrian age, Madison limestone, and Tensleep sandstone yield water to a few public-supply wells. The Cloverly formation yields water to public-supply wells in the Miller Hill and Sage Creek basin area. Wells that tap the Madison limestone, Tensleep sandstone, and Cloverly formation yield water under sufficient artesian pressure to flow at the land surface. The Browns Park formation yields water to springs that supply most of the Rawlins city water and supply water for domestic and stock use. Included on the geologic map are location of wells and test wells, depths to water below land surface, and location of springs. Depths to water range from zero in the unconsolidated deposits along the valley of Sugar Creek at the southern end of the Rawlins uplift to as much as 129 feet below the land surface in the Tertiary sedimentary rocks along the Continental Divide in the southern part of the area. The aquifers are recharged principally by precipitation that falls upon the area, by percolation from streams and ponds, and by movement of ground water from adjacent areas. Water is discharged from the ground-water reservoir by evaporation and transpiration, by seeps and springs, through wells, and by underflow out of the area. Although most water supplies in the area are obtained from springs, some domestic, stock, and public supplies are obtained from drilled wells, many yielding water under artesian pressure, and some flowing. Dissolved solids in the water from several geologic sources, ranging from 181 to 6,660 parts per million (ppm), indicate the varied chemical quality of ground water in the Rawlins area. Water from the Cambrian rocks, Tensleep sandstone, Cloverly formation, Frontier formation, Browns Park formation, and Miocene and Pliocene rocks is generally suitable for domestic and stock use. However, water yielded to the only well sampled in the lower part of the Frontier formation contained a high concentration of fluoride. Water from the rocks mentioned above contains less than 1,000 ppm of dissolved solids but in some places may contain iron in troublesome amounts. Water from the Madison limestone and Tensleep sandstone combined, Permian rocks, and Sundance formation contains more than 1,000 ppm of dissolved solids. Water in the Sundance, Cloverly, and Frontier :formations is very soft. More ground water can be obtained in the Rawlins area than is now being used. Many springs are undeveloped, and water can be obtained from additional wells without unduly lowering ground-water levels.

Water Supply Paper↗
USGS2023

Lunar mare basaltic volcanism: Volcanic features and emplacement processes

Volcanism is a fundamental process in the geological evolution of the Moon, providing clues to the composition and structure of the mantle, the location and duration of interior melting, the nature of convection and lunar thermal evolution. Progress in understanding volcanism has been remarkable in the short 60-year span of the Space Age. Before Sputnik 1 in 1957, the lunar farside was unknown, the origin of the dark lunar maria was debated (sedimentary or volcanic), and significant controversy surrounded the question of how the multitude of craters on the surface formed. Was the Moon formed hot or cold, was the lunar surface young or old, were the craters of impact or volcanic origin? A lunar farside deficient in the darker maria was revealed by Luna 3 in 1959 ( Lipsky 1965a , b ). The Ranger, Lunar Orbiter, Surveyor, Luna and Zond missions significantly augmented pre-Sputnik telescopic observations and began to reveal the diversity of lunar geologic landforms. Return of lunar soil and rock samples from the lunar surface by Apollo (11–12, 14–17) ( Compton 1989 ) and Luna (16, 20, 24) missions ( Harvey 2007a , b ; Huntress and Marov 2011 ) changed the debates overnight ( Hinners 1971 ; Taylor 1975 ). The lunar rocks were igneous and extremely ancient, all from the first half of Solar System history; the oldest, highland anorthosites, were overlain by relatively younger, but still extremely old, extrusive basalts forming the maria.

Reviews in Mineralogy and Geochemistry↗
USGS2015

Lake formation, characteristics and evolution in retroarc deposystems: A synthesis of data from the modern Andean orogen and its associated basins

Lake deposystems are commonly associated with retroarc mountain belts in the geological record. These deposystems are poorly characterized in modern retroarcs, placing limits on our ability to interpret environmental signals from ancient deposits. To address this problem, we have synthesized our existing knowledge about the distribution, morphometrics, and sedimentary geochemical characteristics of tectonically formed lakes in the central Andean retroarc. Large, active mountain belts such as the Andes frequently create an excess of sediment, to the point that modeling and observational data both suggest their adjacent retroarc basins will be rapidly overfilled by sediments. Lake formation, requiring topographic closure, demands special conditions such as topographic isolation and arid climatic conditions to reduce sediment generation, and bedrock lithologies that yield little siliciclastic sediment. Lacustrine deposition in the modern Andean retroarc has different characteristics in the six major morphotectonic zones discussed. (1) High-elevation hinterland basins of the arid Puna-Altiplano Plateau frequently contain underfilled and balanced-filled lakes that are potentially long-lived and display relatively rapid sedimentation rates. (2) Lakes are rare in piggyback basins, although a transition zone exists where basins that originally formed as piggybacks are transferred to the hinterland through forward propagation of the thrust belt. Here, lakes are moderately abundant and long-lived and display somewhat lower sedimentation rates than in the hinterland. (3) Wedge-top and (4) foredeep deposystems of the Andean retroarc are generally overfilled, and lakes are small and ephemeral. (5) Semihumid Andean back-bulge basins contain abundant small lakes, which are moderately long-lived because of underfilling by sediment and low sedimentation rates. (6) Broken foreland lakes are common, typically underfilled, large, and long-lived playa or shallow systems.

Book chapter↗
USGS2019

Quantifying erosion rates by using terrestrial laser scanning at Malakoff Diggins State Historic Park, Nevada County, California, 2014–17

The abandoned hydraulic mine pit at Malakoff Diggins near Grass Valley, California, can produce large volumes of eroded sediment transportable by storm runoff. Sediment-laden water discharged from the pit is a major source of heavy metals to Humbug Creek and the South Yuba River. To develop a comprehensive sediment budget for the Malakoff Diggins mine pit and identify sources of sediment and metals within the pit that can become entrained as suspended sediment in runoff discharged from the pit, the U.S. Geological Survey, working in cooperation with the California Department of Water Resources, the California Department of Parks and Recreation, and the Nevada Irrigation District, used terrestrial laser scanning technology to quantify eroded volumes and erosion rates of sedimentary units exposed in the pit walls. The results for eroded volumes and rates reported here are part one of a three-part study. High-resolution terrestrial laser scanning surveys were repeated annually from 2014 through 2017, including before and after dry and wet winters, measuring centimeter-scale topographic changes to quantify the volume of sediment eroded from outcrops at Malakoff Diggins State Historic Park, located on the western slope of the northern Sierra Nevada about 17 kilometers northeast of Grass Valley, California. Terrestrial laser scanning enabled construction of three-dimensional maps of the complex outcrop surfaces, which could not be mapped non-destructively or in sufficient detail with traditional surveying techniques. Eroded volumes from discrete sedimentary units were calculated at four study sites (numbered 1, 2, 4, and 5) throughout the mine pit for the December 2014 to August 2017 period. Eroded volumes at the four study sites during the 32-month study ranged from 288 plus or minus (±) 13 cubic meters (m 3 ) of sediment at site 1 to 8,517±145 m 3 at site 4. Annual erosion rates at the four study sites ranged from 0.06±0.01 cubic meters per square meter per year (m 3 /m 2 /yr) at site 4 to 0.14±0.01 m 3 /m 2 /yr at site 2. The total eroded volume documented with terrestrial laser scanning at all four study sites from December 2014 to August 2017 was 12,934±334 m 3 of sediment, and the average annual erosion rate for the four study sites was 0.10±0.04 m 3 /m 2 /yr. Horizontal erosional-change maps indicate that a variety of erosional processes were responsible for the eroded sediment volume. These included areally broad and smaller-scale processes such as persistent dry ravel, periodic sheet wash, and frost heave and more localized and larger-scale processes such as coalescing fluvial incision, rotational landslides, and translational block-fall failures.

California↗
USGS1980

Petroleum potential, environmental geology, and the technology for exploration and development of the Kodiak lease sale area #61

The Kodiak lease area is along a convergent ocean margin where active subduction is probably the greatest single influence on the geology. This influence is indicated by the Aleutian Trench, the Aleutian chain of volcanoes, and a well developed Benioff zone of earthquakes. Crustal structure under the Kodiak Shelf is intermediate between continental and oceanic. The thickness of sedimentary rock is 8 ± 3 km, which is greater than beneath the island. The proposed lease—sale area is on a submerged shelf extending 100 km or more seaward from the Kodiak group of islands, and it is more than 400 km long. The Kodiak Shelf still retains a glacial topography which has been modified by tectonically uplifted banks along the shelf edge and across the shelf. These banks are readily detectable signs of recent tectonism. Not so easily detectable are three deep offshore Neogene basins formed by depression of an unsampled presumed Paleogene sedimentary section. The basin floors have subsided 5 to 7 km since middle (?) Miocene time; the basins are filled with late Miocene and younger sediment that is only gently deformed. A sudden increase in seismic velocity occurs across the contact between the basin fill and the presumed Paleogene rocks that underlie it. This discontinuity in seismic velocity, the smooth character of the basin surface, and the truncation of dipping beds beneath it, are the basis for inferring subaerial erosion of the Paleogene section. If this inference is correct, the structure in some places requires at least 3000 m of subsidence followed by an uplift of even greater magnitude in Neogene time. The vertical tectonism offshore might produce reservoir rock and different source rock than encountered onshore.

Alaska↗
USGS2011

Geologic map of the Chisos Mountains, Big Bend National Park, Texas

The Chisos Mountains form some of the highest ground in Texas, second only to Guadalupe Peak near the New Mexico border. The northern half of the range is mostly above 5,500 feet with Emory Peak the high point at 7,825 feet. The mountains are centrally located in Big Bend National Park between Panther Junction and Punta de la Sierra. Big Bend National Park lies near the diffuse border between the Great Plains Province to the northeast and the Sonoran section of the Basin-and-Range structural province to the west and southwest. These geologically unique regions are distinguished from one another by large differences in their landscape and by the amount and style of internal structural deformation. The Great Plains Province is characterized by flat-lying or gently dipping sedimentary strata, low topographic relief, shallow stream valleys, and by a general lack of faulting. Very little active deposition is occurring on the plains, except in the bottoms of active stream valleys. In southwestern Texas the plains stand at average elevations of 2,000 to 3,300 feet and slope gently east toward the Mississippi River and the Gulf of Mexico. The Great Plains have remained relatively unchanged for the last 65 million years, except that they have been uplifted to their present height from lower elevations probably in the last 5 million years. The Basin-and-Range province is characterized by linear parallel mountain ranges, deep sediment-filled valleys, and high structural and topographic relief. The eastern part of the province is at a slightly higher average elevation than the plains. The province is known for its complex patterns of Cenozoic faulting. Today it bears little resemblance to the way it was during the Paleocene when the entire Trans-Pecos region was a simple lowland that was near or slightly below sea level.

Scientific Investigations Map↗