Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Rock Products”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54Linked to original sources
USGS2018

Estimating the pressure-limited CO2 injection and storage capacity of the United States saline formations: Effect of the presence of hydrocarbon reservoirs

The U.S. Geological Survey (USGS) national assessment of carbon dioxide (CO 2 ) storage capacity evaluated 192 saline Storage Assessment Units (SAUs) in 33 U.S. onshore sedimentary basins that may be utilized for CO 2 storage (see USGS Circular 1386). Similar to many other available models, volumetric analysis was utilized to estimate the initial CO 2 injection and storage capacity of these SAUs based on aquifer characteristics and buoyant and residual trapping. The factor being almost always overlooked in most CO 2 storage capacity models is that many of the evaluated SAUs contain large numbers of both conventional and unconventional discovered and undiscovered oil and gas reservoirs. The hydrocarbon production and pressure distribution of the resident oil and gas reservoirs may be negatively influenced by the propagated CO 2 plume and pressure front resulting from a CO 2 injection and storage operation in the surrounding SAU. To have a more realistic and accurate estimation of CO 2 injection and storage capacity in saline formations, a model was previously developed that considers the CO 2 injectivity of a given formation, underground pressure build-up limitations imposed by the rock fracturing pressure and the presence of hydrocarbon reservoirs within these aquifers. The developed method estimates the pre–brine extraction, pressure-limited CO 2 injection and storage capacity of a saline formation by applying 3D numerical simulation only on the effective injection area (A eff ) surrounding each CO 2 injection well utilizing TOUGH2-ECO2N simulation software.

Sligo and Hosston Formations↗
USGS1984

Mineralogic evidence for an impact event at the Cretaceous-Tertiary boundary

A thin claystone layer found in nonmarine rocks at the palynological Cretaceous-Tertiary boundary in eastern Montana contains an anomalously high value of iridium. The nonclay fraction is mostly quartz with minor feldspar, and some of these grains display planar features. These planar features are related to specific crystallographic directions in the quartz lattice. The shocked quartz grains also exhibit asterism and have lowered refractive indices. All these mineralogical features are characteristic of shock metamorphism and are compelling evidence that the shocked grains are the product of a high velocity impact between a large extraterrestrial body and the earth. The shocked minerals represent silicic target material injected into the stratosphere by the impact of the projectile.

Science↗
USGS2024

Black shale - Its deposition and diagenesis.

Black shale is a dark-colored mudrock containing organic matter that may have generated hydrocarbons in the subsurface or that may yield hydrocarbons by pyrolysis. Many black shale units are enriched in metals severalfold above expected amounts in ordinary shale. Some black shale units have served as host rocks for syngenetic metal deposits. Black shales have formed throughout the Earth's history and in all parts of the world. This suggests that geologic processes and not geologic settings are the controlling factors in the accumulation of black shale. Geologic processes are those of deposition by which the raw materials of black shale are accumulated and those of diagenesis in response to increasing depth of burial. Depositional processes involve a range of relationships among such factors as organic productivity, clastic sedimentation rate, and the intensity of oxidation by which organic matter is destroyed. If enough organic material is present to exhaust the oxygen in the environment, black shale results. Diagenetic processes involve chemical reactions controlled by the nature of the components and by the pressure and temperature regimens that continuing burial imposes. For a thickness of a few meters beneath the surface, sulfate is reduced and sulfide minerals may be deposited. Fermentation reactions in the next several hundred meters result in biogenic methane, followed successively at greater depths by decarboxylation reactions and thermal maturation that form additional hydrocarbons. Suites of newly formed minerals are characteristic for each of the zones of diagenesis.

Clays and Clay Minerals↗
USGS2009

Ground-Water Quality in the Upper Hudson River Basin, New York, 2007

Water samples were collected from 25 production and domestic wells in the Upper Hudson River Basin (north of the Federal Dam at Troy, N.Y.) from August through November 2007 to characterize the ground-water quality. The Upper Hudson River Basin covers 4,600 square miles in upstate New York, Vermont, and Massachusetts; the study area encompasses the 4,000 square miles that lie within New York. The basin is underlain by crystalline and sedimentary bedrock, including gneiss, shale, and slate; some sandstone and carbonate rocks are present locally. The bedrock in some areas is overlain by surficial deposits of saturated sand and gravel. Of the 25 wells sampled, 13 were finished in sand and gravel deposits, and 12 were finished in bedrock. The samples were collected and processed by standard U.S. Geological Survey procedures and were analyzed for 225 physical properties and constituents, including major ions, nutrients, trace elements, radon-222, pesticides, volatile organic compounds (VOCs), and indicator bacteria. Water quality in the study area is generally good, but concentrations of some constituents exceeded current or proposed Federal or New York State drinking-water standards; these were: color (1 sample), pH (2 samples), sodium (5 samples), nitrate plus nitrite (2 samples), aluminum (3 samples), iron (1 sample), manganese (7 samples), radon-222 (11 samples), and bacteria (1 sample). Dissolved-oxygen concentrations in samples from wells finished in sand and gravel [median 5.4 milligrams per liter (mg/L)] were greater than those from wells finished in bedrock (median 0.4 mg/L). The pH of all samples was typically neutral or slightly basic (median 7.6); the median water temperature was 9.7 deg C. The ions with the highest concentrations were bicarbonate (median 123 mg/L) and calcium (median 33.9 mg/L). Ground water in the basin is generally soft to moderately hard (less than or equal to 120 mg/L as CaCO3) (median hardness 110 mg/L as CaCO3). Concentrations of nitrate plus nitrite in samples from sand and gravel wells (median concentration 0.47 mg/L as nitrogen) were generally higher than those in samples from bedrock wells (median estimated 0.05 mg/L as nitrogen), and concentrations in two samples exceeded established drinking-water standards for nitrate (10 mg/L as nitrogen). The trace elements with the highest concentrations were strontium [median 217 micrograms per liter (ug/L)] and iron (median 39 ug/L). The highest radon-222 activities were in samples from bedrock wells [maximum 2,930 picocuries per liter (pCi/L)] and 44 percent of all samples exceeded a proposed U.S. Environmental Protection Agency (USEPA) drinking-water standard of 300 pCi/L. Ten pesticides and pesticide degradates were detected among 11 samples at concentrations of 1.47 ug/L or less; most were herbicides or their degradates. Six VOCs were detected among 10 samples at concentrations of 4.2 ug/L or less; these included three trihalomethanes and methyl tert-butyl ether, tetrachloroethene, and toluene. Most detections were in samples from sand and gravel wells and none exceeded drinking-water standards. Total coliform bacteria were detected in only one sample, and fecal coliform bacteria, including Escherichia coli, were not detected in any sample.

Open-File Report↗
USGS2003

Ground-water resources of Saipan, Commonwealth of the Northern Mariana Islands

Saipan has an area of 48 mi 2 and is the largest of the 14 islands in the Commonwealth of the Northern Mariana Islands (CNMI). The island is formed by volcanic rocks overlain by younger limestones. The island is situated in the western Pacific Ocean at latitude 15 o 12'N and longitude 145 o 45'E, about 3,740 mi west-southwest of Honolulu and midway between Japan and New Guinea (fig. 1). The climate on Saipan is classified as tropical marine with an average temperature of 80 o F. The natural beauty of the island and surrounding waters are the basis for a growing tourist-based economy. The resulting rapid development and increases in resident and tourist populations have added stresses to the island's limited water supplies. Freshwater resources on Saipan are not readily observable because, aside from the abundant rainfall, most freshwater occurs as ground water. Fresh ground water is found in aquifers composed mainly of fragmental limestones. About 90 percent of the municipal water supply comes from 140 shallow wells that withdraw about 11 Mgal/d. The chloride concentration of water withdrawn from production wells ranges from less than 100 mg/L for wells in the Akgak and Capital Hill well fields, to over 2,000 mg/L from wells in the Puerto Rico, Maui IV, and Marpi Quarry well fields. The chloride concentrations and rates of ground-water production are not currently adequate for providing island residents with a potable 24-hour water supply and future demands are expected to be higher. To better understand the ground-water resources of the island, and water resources on tropical islands in general, the U.S. Geological Survey (USGS) entered into a cooperative program with the Commonwealth Utilities Corporation (CUC). The objective of the program, initiated in 1989, is to assess the ground-water resources of Saipan and to make hydrologic information available to the CUC in support of their ongoing efforts to improve the quality and quantity of the municipal water supply. This report presents some of the results of the program including descriptions of (1) the geography and geology, (2) the occurrence of fresh ground water in permeable limestones that extend to some distance below sea level where water-level elevation is affected by ocean tides (coastal aquifers) and in limestones that overlie volcanic basement rocks above sea level (high-level aquifers), (3) the water-table configuration and directions of ground-water flow, and (4) the rainfall, ground-water withdrawal, and chloride concentrations in well water. Also described is the relation of the changes in water-table elevations to changes in sea level, rainfall, and ground-water withdrawal.

Saipan↗
USGS2017

Rare-earth elements

The rare-earth elements (REEs) are 15 elements that range in atomic number from 57 (lanthanum) to 71 (lutetium); they are commonly referred to as the “lanthanides.” Yttrium (atomic number 39) is also commonly regarded as an REE because it shares chemical and physical similarities and has affinities with the lanthanides. Although REEs are not rare in terms of average crustal abundance, the concentrated deposits of REEs are limited in number. Because of their unusual physical and chemical properties, the REEs have diverse defense, energy, industrial, and military technology applications. The glass industry is the leading consumer of REE raw materials, which are used for glass polishing and as additives that provide color and special optical properties to the glass. Lanthanum-based catalysts are used in petroleum refining, and cerium-based catalysts are used in automotive catalytic converters. The use of REEs in magnets is a rapidly increasing application. Neodymium-iron-boron magnets, which are the strongest known type of magnets, are used when space and weight are restrictions. Nickel-metal hydride batteries use anodes made of a lanthanum-based alloys. China, which has led the world production of REEs for decades, accounted for more than 90 percent of global production and supply, on average, during the past decade. Citing a need to retain its limited REE resources to meet domestic requirements as well as concerns about the environmental effects of mining, China began placing restrictions on the supply of REEs in 2010 through the imposition of quotas, licenses, and taxes. As a result, the global rare-earth industry has increased its stockpiling of REEs; explored for deposits outside of China; and promoted new efforts to conserve, recycle, and substitute for REEs. New mine production began at Mount Weld in Western Australia, and numerous other exploration and development projects noted in this chapter are ongoing throughout the world. The REE-bearing minerals are diverse and often complex in composition. At least 245 individual REE-bearing minerals are recognized; they are mainly carbonates, fluorocarbonates, and hydroxylcarbonates (n = 42); oxides (n = 59); silicates (n = 85); and phosphates (n = 26). Many of the world’s significant REE deposits occur in carbonatites, which are carbonate igneous rocks. The REEs also have a strong genetic association with alkaline magmatism. The systematic geologic and chemical processes that explain these observations are not well understood. Economic or potentially economic REE deposits have been found in (a) carbonatites, (b) peralkaline igneous systems, (c) magmatic magnetite-hematite bodies, (d) iron oxide-copper-gold (IOCG) deposits, (e) xenotime-monazite accumulations in mafic gneiss, (f) ion-absorption clay deposits, and (g) monazite-xenotime-bearing placer deposits. Carbonatites have been the world’s main source for the light REEs since the 1960s. Ion-adsorption clay deposits in southern China are the world’s primary source of the heavy REEs. Monazite-bearing placer deposits were important sources of REEs before the mid-1960s and may be again in the future. In recent years, REEs have been produced from large carbonatite bodies mined at the Mountain Pass deposit in California and, in China, at the Bayan Obo deposit in Nei Mongol Autonomous Region, the Maoniuping deposit in Sichuan Province, the Daluxiang deposit in Sichuan Province, and the Weishan deposit in Anhui Province. Alkaline igneous complexes have recently been targeted for exploration because of their enrichments in the heavy REEs. Information relevant to the environmental aspects of REE mining is limited. Little is known about the aquatic toxicity of REEs. The United States lacks drinking water standards for REEs. The concentrations of REEs in environmental media are influenced by their low abundances in crustal rocks and their limited solubility in most groundwaters and surface waters. The scarcity of sulfide minerals, including pyrite, minimizes or eliminates concerns about acid-mine drainage for carbonatite-hosted deposits and alkaline-intrusion-related REE deposits. For now, insights into environmental responses of REE mine wastes must rely on predictive models.

Professional Paper↗
USGS1998

Characteristics of discrete and basin-centered parts of the Lower Silurian regional oil and gas accumulation, Appalachian basin: Preliminary results from a data set of 25 oil and gas fields

Oil and gas trapped in Lower Silurian "Clinton" sands and Medina Group sandstone constitute a regional hydrocarbon accumulation that extends 425 mi in length from Ontario, Canada to northeastern Kentucky. The 125-mi width of the accumulation extends from central Ohio eastward to western Pennsylvania and west-central New York. Lenticular and intertonguing reservoirs, a gradual eastward decrease in reservoir porosity and permeability, and poorly segregated gas, oil, and water in the reservoirs make it very difficult to recognize clear-cut geologic- and production-based subdivisions in the accumulation that are relevant to resource assessment. However, subtle variations are recognizable that permit the regional accumulation to be subdivided into three tentative parts: a western gas-bearing part having more or less discrete fields; an eastern gas-bearing part having many characteristics of a basin-centered accumulation; and a central oil- and gas-bearing part with "hybrid" fields that share characteristics of both discrete and basin-centered accumulation. A data set of 25 oil and gas fields is used in the report to compare selected attributes of the three parts of the regional accumulation. A fourth part of the regional accumulation, not discussed here, is an eastern extension of basin-centered accumulation having local commercial gas in the Tuscarora Sandstone, a proximal facies of the Lower Silurian depositional system. A basin-centered gas accumulation is a regionally extensive and commonly very thick zone of gas saturation that occurs in low-permeability rocks in the central, deeper part of a sedimentary basin. Another commonly used term for this type of accumulation is deep-basin gas accumulation. Basin-centered accumulation is a variety of continuous-type accumulation. The "Clinton" sands and Medina Group sandstone part of the basin-centered gas accumulation is characterized by: a) reservoir porosity ranging from about 5 to 10 percent; b) reservoir permeability equal to or less than 0.1 mD; c) low reservoir water saturation and an average water yield per well less than about 9 to 13 BW/MMCFG; d) a broadly defined updip water-block trap; e) underpressured reservoirs with a gradient ranging from 0.25 to 0.35 psi/ft; and f) reservoir temperature of at least 125° F (52° C). Other than for historical and location purposes, the term field has little or no meaning as an assessment unit for the regional accumulation. In practice, each designated field represents a production sweet spot having relatively high EURs per well that in turn merges with surrounding gas-productive regions that are generally larger in area but have lower EURs per well. This important feature of the Lower Silurian regional accumulation, whereby most wells drilled into it are gas productive, must be considered when assessing its potential for remaining recoverable gas resources. Most of the remaining gas resources reside in "Clinton" sands and Medina Group sandstone in the basin-centered part of the accumulation where as much as several tens of TCF of natural gas may be technically recoverable. The Tuscarora Sandstone in the eastern extension of the basin-centered part of the accumulation underlies a very large area and, although commonly characterized by very low porosity and permeability and low-Btu gas, probably contains additional gas resources. Remaining undiscovered recoverable gas and oil resources in the discrete and hybrid parts of the accumulation are primarily located beneath Lake Erie.

Maryland, New York, Ohio, Ontario, Pennsylvania, V↗
USGS2022

Foraging habitat selection of shrubland bird community in tropical dry forest

Habitat loss due to increasing anthropogenic disturbance is the major driver for bird population declines across the globe. Within the Eastern Ghats of India, shrubland bird communities are threatened by shrinking of suitable habitats due to increased anthropogenic disturbance and climate change. The development of an effective habitat management strategy is hampered by the absence of data for this bird community. To address this knowledge gap, we examined foraging sites for 14 shrubland bird species, including three declining species, in three study areas representing the shrubland type of forest community in the Eastern Ghats. We recorded microhabitat features within an 11 m radius of observed foraging points and compared these data with similar data from random plots. We used chi-square to test the association between plant species and bird species for sites where they were observed foraging. We observed significant differences between foraging sites of all the study species and random plots, thus indicating selection for foraging habitat. Using linear discriminant analysis, we found that the microhabitat features important for the bird species were shrub density, vegetational height, vertical foliage stratification, grass height, and percent rock cover. Our results show that diet guild and foraging strata influence the foraging microhabitat selection of a species (e.g., ground-foraging species differed significantly from other species). Except for two species, all focal birds were associated with at least one plant species. The plant-bird association was based on foraging, structural, or behavioral preferences. Several key factors affecting foraging habitat such as shrub density can be actively managed at the local scale. Strategic and selective harvesting of forest products and a spatially and temporally controlled livestock grazing regime may allow regeneration of scrubland and create conditions favorable to birds.

Andhra Pradesh↗
USGS2009

Mesozoic magmatism in an upper- to middle-crustal section through the Cordilleran continental margin arc, eastern Transverse Ranges, California

The eastern Transverse Ranges provide essentially continuous exposure for >100 km across the strike of the Mesozoic Cordilleran orogen. Thermobarometric calculations based on hornblende and plagioclase compositions in Mesozoic plutonic rocks show that the fi rst-order distribution of rock units resulted from differential Laramide exhumation. Mesozoic supracrustal rocks are preserved in the relatively little exhumed eastern part of the eastern Transverse Ranges and south-central Mojave Desert, and progressively greater rock uplift and exhumation toward the west exposed rocks originating at mid-crustal depths. The eastern Transverse Ranges thus constitute a tilted, nearly continuously exposed crustal section of the Mesozoic magmatic arc and framework rocks from subvolcanic levels to paleodepths as great as ??22 km. The base of this tilted arc section is a moderately east-dipping sheeted magmatic complex >10 km in width by 70 km in length, constructed structurally beneath, yet synchronous with Late Jurassic and Cretaceous upper-crustal plutons. Geochronology and regional structural relations thus suggest that arc magmas generated in the lower crust of this continental arc interacted in a complex mid-crustal zone of crystallization and mixing; products of this zone were parental magmas that formed relatively homogeneous upper crustal felsic plutons and fed lavas and voluminous ignimbrites. ?? 2009 The Geological Society of America.

Special Paper of the Geological Society of America↗
USGS2011

Fire in Chile

The mediterranean-type climate (MTC) in Chile (Fig. 6.1) is distributed from La Serena (30° S; Región IV, see Appendix 6.1) in the north to Concepción (37° S; Región X) in the south. It is constrained to the west side of the Andean mountain range, although as the height of this range decreases in the south, a MTC is observed at least as far eastward as Bariloche, Argentina. Although a pattern of winter rains and summer droughts extends northward into the Atacama Desert, this area falls outside our definition of MTC because winter evaporation exceeds rainfall in these areas of extremely low precipitation. The northern border of the MTC region is the transition from desert communities to shrubby matorral, while the southern border corresponds to the point of transition from sclerophyll woodlands to Valdivian evergreen forests (Gajardo 1994; Amigo & Ramirez 1998; Rundel et al . 2007). The landforms of central Chile can be divided into three north–south trending geomorphic zones (Fig. 6.1): the Coastal Cordillera, the Central Valley, and the high Andean Cordillera (Armesto et al . 2007). The Coastal Cordillera rises relatively sharply from the coast, with little extent of coastal terraces, and reaches elevations as high as 2222 m at Cerro Roble and 1880 m at Cerro Campana, which lie between Valparaíso (Región V) on the coast and Santiago (Región Metropolitana) at the base of the Andes. The Central Valley is a structural basin filled to great depth by sediments from the surrounding mountains. North of Santiago, spurs from the Andes extend west across the valley and connect with the Coastal Cordillera, separating individual river basins such as that of the Río Aconcagua (Región V). From Santiago to the south, however, the valley extends uninterrupted for a distance of 900 km to Puerto Montt (Región X), with typical elevations of 400–700 m. The Andean Cordillera marks the eastern boundary of the MTC zone of central Chile. It is the product of complex tectonic activity beginning in the Cretaceous (see Fig. 9.1), but with major uplift in the late Tertiary. Paleobotanical evidence suggests that the central Andes had not attained more than half their current elevation by 10 Ma (Gregory-Wodzicki 2000), but was close to the present height by the end of the Miocene (Reynolds et al . 1990). Elevations reach from 4000 m to nearly 7000 m. To the north of Santiago the Andes are largely composed of metamorphosed sedimentary rock, but a major volcanic zone extends from south of Santiago through the Lake District (Los Lagos Región X).

Book chapter↗
USGS1989

Earthquakes triggered by fluid extraction

Seismicity is correlated in space and time with production from some oil and gas fields where pore pressures have declined by several tens of megapascals. Reverse faulting has occurred both above and below petroleum reservoirs, and normal faulting has occurred on the flanks of at least one reservoir. The theory of poroelasticity requires that fluid extraction locally alter the state of stress. Calculations with simple geometries predict stress perturbations that are consistent with observed earthquake locations and focal mechanisms. Measurements of surface displacement and strain, pore pressure, stress, and poroelastic rock properties in such areas could be used to test theoretical predictions and improve our understanding of earthquake mechanics.

Geology↗
USGS1957

Magmatic, connate, and metamorphic waters

Some major types of water of “deep” origin are believed to be recognizable from their chemical and isotopic compositions. Oil-field brines dominated by sodium and calcium chlorides differ markedly from average ocean water. In general, the brines are believed to be connate in origin (“fossil” sea water) with a negligible to high proportion of meteoric water. Many brines, particularly in pre-Tertiary rocks, are much higher in salinity than sea water and are greatly enriched in calcium as well as sodium chloride. Brines near the salinity of sea water are generally higher, relative to sea water, in bicarbonate, iodine, boron, lithium, silica, ammonium, and water-soluble organic compounds, and lower in sulfate, potassium, and magnesium. Many changes take place after sea water is entrapped in newly deposited marine sediments: (1) Iodine, silicon, boron, nitrogen, and other elements have been selectively concentrated in organisms that decompose during and after burial in sediments. Many of the elements may redissolve in the interstitial water. (2) Bacteria are active in the sediments and reduce sulfate to sulfide and produce methane, ammonia, carbon dioxide, and other products. (3) Some elements have been selectively removed from sea water by inorganic processes, such as adsorption on clays and colloidal matter. When this matter is reconstituted by diagenetic and other changes, some components are redissolved. The abundance of lithium and possibly boron and other elements may be controlled to a considerable extent by these inorganic processes. (4) The interstitial water may react chemically with enclosing sediments and produce dolomite, reconstituted clays, and other minerals. The high loss of magnesium relative to calcium in most connate waters is probably caused by such reactions. Volcanic hot-spring waters of different compositions have been discussed in an accompanying paper (White, 1957). The most significant type is believed to be dominated by sodium chloride, and is best explained as originating from dense gases driven at high temperature and pressure from magma and containing much matter of low volatility that is in solution because of the solvent properties of high-density steam. This dense vapor is condensed in and greatly diluted by deeply circulating meteoric water. Most other types of volcanic water are believed to be derived from the sodium-chloride type. Volcanic sodium-chloride waters are similar in many respects to connate waters but are believed to be distinguishable by relatively high lithium, fluorine, silica, boron, sulfur, CO 2 , arsenic, and antimony; by relatively low calcium and magnesium; and by lack of hydrocarbons, water-soluble organic compounds, and perhaps ammonia and nitrate. Relatively high boron and combined CO 2 are alone not reliable indicators of a volcanic origin. During compaction, rocks lose most of their interstitial high-chloride water; much additional water may then be lost during progressive metamorphism, and the content changes from about 5 per cent in shale to perhaps 1 per cent in gneiss. This expelled water is here called metamorphic. Because of pressure and permeability gradients, it must normally escape upward and mix with connate and meteoric water. Even though large quantities must exist, no example of metamorphic water has been positively identified. Some thermal springs in California are high in salinity and relatively low in temperature and apparent associated heat flow. Some are clearly connate in origin. Other springs are characterized by very high combined carbon dioxide and boron, relative to chloride. Their compositions are considerably different from known connate and volcanic waters and are believed to be best explained by a metamorphic origin. Although some major types of deep water seem to be recognizable, there is much danger of oversimplifying the problems. Many waters are no doubt mixtures of different types, and some of high salinity result from dissolution of salts by meteoric water.

GSA Bulletin↗
USGS2012

Geologic models and evaluation of undiscovered conventional and continuous oil and gas resources: Upper Cretaceous Austin Chalk

The Upper Cretaceous Austin Chalk forms a low-permeability, onshore Gulf of Mexico reservoir that produces oil and gas from major fractures oriented parallel to the underlying Lower Cretaceous shelf edge. Horizontal drilling links these fracture systems to create an interconnected network that drains the reservoir. Field and well locations along the production trend are controlled by fracture networks. Highly fractured chalk is present along both regional and local fault zones. Fractures are also genetically linked to movement of the underlying Jurassic Louann Salt with tensile fractures forming downdip of salt-related structures creating the most effective reservoirs. Undiscovered accumulations should also be associated with structure-controlled fracture systems because much of the Austin that overlies the Lower Cretaceous shelf edge remains unexplored. The Upper Cretaceous Eagle Ford Shale is the primary source rock for Austin Chalk hydrocarbons. This transgressive marine shale varies in thickness and lithology across the study area and contains both oil- and gas-prone kerogen. The Eagle Ford began generating oil and gas in the early Miocene, and vertical migration through fractures was sufficient to charge the Austin reservoirs.

Alabama;Arkansas;Florida;Georgia;Illinois;Kentucky↗
USGS1983

Ground-water resources in the Hood Basin, Oregon

The Hood Basin, an area of 1,035 square miles in north-central Oregon, includes the drainage basins of all tributaries of the Columbia River between Eagle Creek and Fifteenmile Creek. The physical characteristics and climate of the basin are diverse. The Wasco subarea, in the eastern half of the basin, has moderate relief, mostly intermittent streams, and semiarid climate. The Hood subarea, in the western half, has rugged topography, numerous perennial streams, and a humid climate. Water-bearing geologic units that underlie the basin include volcanic, volcaniclastic, and sedimentary rocks of Miocene to Holocene age, and unconsolidated surficial deposits of Pleistocene and Holocene age. The most important water-bearing unit, the Columbia River Basalt Group, underlies almost the entire basin. Total thickness probably exceeds 2,000 feet, but by 1980 only the upper 1,000 feet or less had been developed by wells. Wells in this unit generally yield from 15 to 1,000 gallons per minute and a few yield as much as 3,300 gallons per minute. The most productive aquifer in the Columbia River Basalt Group is The Dalles Ground Water Reservoir, a permeable zone of fractured basalt about 25 to 30 square miles in extent that underlies the city of The Dalles. During the late 1950's and mid-1960's, withdrawals of 15,000 acre-feet per year or more caused water levels in the aquifer to decline sharply. Pumpage had diminished to about 5,000 acre-feet per year in 1979 and water levels have stabilized, indicating that ground water recharge and discharge, including the pumping, are in balance. The other principal geologic units in the basin have more limited areal distribution and less saturated thickness than the Columbia River Basalt Group. Generally, these units are capable of yielding from a few to a hundred gallons per minute to wells. Most of the ground water in the basin is chemically suitable for domestic, irrigation, or other uses. Some ground water has objectionable concentrations of iron (0.3 to 6.4 milligrams per liter) and manganese (0.05 to 1.2 milligrams per liter) or is moderately hard to very hard (60 to 260 milligrams per liter as CaCO 3 ). The principal use of ground water in the Hood Basin is for irrigation of crops, with an estimated withdrawal of 7,700 acre-feet in 1979. Additional ground-water withdrawals in 1979 were estimated as: Industrial, 2,600 acre-feet; public supply, 2,100 acre-feet; and domestic and stock supply, 200 acre-feet.

Oregon↗
USGS2013

Field trial of a pulsed limestone diversion well

The use of limestone diversion wells to treat acid mine drainage (AMD) is well-known, but in many cases, acid neutralization is not as complete as would be desired. Reasons for this include channeling of the water through the limestone bed, and the slow reaction rate of the limestone gravel. A new approach to improve the performance of the diversion well was tested in the field at the Jennings Environmental Education Center, near Slippery Rock, PA. In this approach, a finer size distribution of limestone was used so as to allow fluidization of the limestone bed, thus eliminating channeling and increasing particle surface area for faster reaction rates. Also, water flow was regulated through the use of a dosing siphon, so that consistent fluidization of the limestone sand could be achieved. Testing began late in the summer of 2010, and continued through November of 2011. Initial system performance during the 2010 field season was good, with the production of net alkaline water, but hydraulic problems involving air release and limestone sand retention were observed. In the summer of 2011, a finer size of limestone sand was procured for use in the system. This material fluidized more readily, but acid neutralization tapered off after several days. Subsequent observations indicated that the hydraulics of the system was compromised by the formation of iron oxides in the pipe leading to the limestone bed, which affected water distribution and flow through the bed. Although results from the field trial were mixed, it is believed that without the formation of iron oxides and plugging of the pipe, better acid neutralization and treatment would have occurred. Further tests are being considered using a different hydraulic configuration for the limestone sand fluidized bed.

Pennsylvania↗
USGS1987

Inter-laboratory comparison of X-ray fluorescence analyses of eruptive products of El Chichón Volcano, Chiapas, Mexico

An inter-laboratory comparison has been made of X-ray fluorescence analyses of 10 samples of lava and pumices from El Chichón Volcano, Chiapas, Mexico. Some determinations of major-element constituents agree within analytical uncertainty, whereas others exchibit significant bias. Analyses carried out at the Michigan Technological University (MTU) laboratory are systematically lower in MgO (26–48%), Fe total (5–18%), CaO (4–15%) and higher in K 2 O (0–15%) than analyses made at the U.S. Geological Survey (USGS) Denver laboratory. These differences are ascribed in part to a complex combination of calibration assumptionsand mineralogical and particle-size effects inherent in the use of pressed rock-powder pellets in the analytical procedure of the MTU laboratory. Other, but as yet unknown, differences in sample preparation and/or analytical technique may also be important; effects related to natural sample inhomogeneityare believed to be insignificant. The inter-laboratory differences in the analytical data complicated accurate assessment of whether El Chichón magmas have changed composition during the past 300 000 a. Knowledge of such change is needed for understanding petrogenetic history and for such related studies as evaluation of volcanic hazards.

Applied Geochemistry↗
USGS1979

Mineral resources of the Citico Creek Wilderness Study Area, Monroe County, Tennessee

The proposed Citico Creek Wilderness comprises about 5,670 hectares (56.7 km2) in the Cherokee National Forest south of the Little Tennessee River in easternmost Monroe County, Tennessee. Principal drainages are Citico Creek and Doublecamp Creek. Rocks of the study area include greenschist-facies arkosic metasandstone, metagraywacke, slate, and metaconglomerate of the Great Smoky Group of late Precambrian age. Minor deposits of unconsolidated Quaternary alluvium locally mantle the bedrock. Deformation is shown by asymmetric and overturned folds and by several major faults. More than 500 sample s of soil, rock, and stream sediment were collected and analyzed for 31 major, minor, and trace elements by semiquantitative spectrographic, atomic absorption, and fire assay methods No significant metal anomalies were detected. Concentrations of Cu, Co, As, Pb, and Zn slightly higher than background are found within sulfidic parts of a distinctive stratigraphic unit composed of graphitic slate and metagraywacke. Pyrite and pyrrhotite are the chief sulfide minerals, with traces o f accessory sphalerite, chalcopyrite, galena, and arsenopyrite occurring as microscopic intergrowths. A reconnaissance ground radiometric survey and subsequent neutron activation analyses of selected radioactive rock samples show that the sulfidic parts of the graphitic slate unit have a relatively high content of Th and U, but are not potentially economic. No metallic mineral resources appear to exist within the Citico Creek Wilderness Study Area. Resources of slate, silica, and stone are present, but they display no special qualities to differentiate them from other such material throughout the region. Ceramic evaluation tests on selected samples of slate indicate that the slate would have only marginal use for structural clay products such as brick and tile. Minor sand and gravel deposits occur along a few streams but are present in larger quantities and are more easily recovered in other areas.

Tennessee↗
USGS2017

Geology and assessment of undiscovered oil and gas resources of the Timan-Pechora Basin Province, Russia, 2008

The Timan-Pechora Basin Province is a triangular area that represents the northeasternmost cratonic block of east European Russia. A 75-year history of petroleum exploration and production in the area there has led to the discovery of more than 16 billion barrels of oil (BBO) and 40 trillion cubic feet of gas (TCFG). Three geologic assessment units (AUs) were defined for assessing the potential for undiscovered oil and gas resources in the province: (1) the Northwest Izhma Depression AU, which includes all potential structures and reservoirs that formed in the northwestern part of the Izhma-Pechora Depression, although this part of the basin contains only sparse source and reservoir rocks and so was not assessed quantitatively; (2) the Main Basin Platform AU, which includes all potential structures and reservoirs that formed in the central part of the basin, where the tectonic and petroleum system evolution was complex; and (3) the Foredeep Basins AU, which includes all potential structures and reservoirs that formed within the thick sedimentary section of the foredeep basins west of the Uralian fold and thrust belt during the Permian and Triassic Uralian orogeny. For the Timan-Pechora Basin Province, the estimated means of undiscovered resources are 3.3 BBO, 17 TCFG, and 0.3 billion barrels of natural-gas liquids (BBNGL). For the AU areas north of the Arctic Circle in the province, the estimated means of undiscovered resources are 1.7 BBO, 9.0 TCFG, and 0.2 BBNGL. These assessment results indicate that exploration in the Timan-Pechora Basin Province is at a mature level.

Timan-Pechora Basin Province↗