Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Plants”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54Linked to original sources
USGS2007

Characterization of stormflows and wastewater treatment-plant effluent discharges on water quality, suspended sediment, and stream morphology for Fountain and Monument Creek watersheds, Colorado, 1981-2006

In 1998, the U.S. Geological Survey, in cooperation with Colorado Springs City Engineering, began a study of the Fountain and Monument Creek watersheds to characterize water quality and suspended-sediment conditions in the watershed for different flow regimes, with an emphasis on characterizing water quality during storm runoff. Water-quality and suspended-sediment samples were collected in the Fountain and Monument Creek watersheds from 1981 through 2006 to evaluate the effects of stormflows and wastewater-treatment effluent on Fountain and Monument Creeks in the Colorado Springs, Colorado, area. Water-quality data were collected at 11 sites between 1981 and 2001, and 14 tributary sites were added in 2003 to increase spatial coverage and characterize water quality throughout the watersheds. Suspended-sediment samples collected daily at 7 sites from 1998 through 2001, 6 sites daily from 2003 through 2006, and 13 tributary sites intermittently from 2003 through 2006 were used to evaluate the effects of stormflow on suspended-sediment concentrations, discharges, and yields. Data were separated into three flow regimes: base flow, normal flow, and stormflow. Stormflow concentrations from 1998 through 2006 were compared to Colorado acute instream standards and, with the exception of a few isolated cases, did not exceed water-quality standards for inorganic constituents that were analyzed. However, stormflow concentrations of both fecal coliform and Escherichia coli (E. coli) frequently exceeded water-quality standards during 1998 through 2006 on main-stem and tributary sites by more than an order of magnitude. There were two sites on Cottonwood Creek, a tributary to Monument Creek, with elevated concentrations of dissolved nitrite plus nitrate: site 07103985 (TbCr), a tributary to Cottonwood Creek and site 07103990 (lower_CoCr), downstream from site 07103985 (TbCr), and near the confluence with Monument Creek. During base-flow and normal-flow conditions, the median concentrations of dissolved nitrite plus nitrate ranged from 5.1 to 6.1 mg/L and were 4 to 7 times larger than concentrations at the nearest upstream site on Monument Creek, site 07103970 (MoCr_Woodmen). The source of these larger dissolved nitrite plus nitrate concentrations has not been identified, but the fact that all measurements had elevated dissolved nitrite plus nitrate concentrations indicates a relatively constant source. Most stormflow concentrations of dissolved trace elements were smaller than concentrations from base-flow or normal-flow samples. However, median concentrations of total arsenic, copper, lead, manganese, nickel, and zinc generally were much larger during periods of stormflow than during base flow or normal flow. Concentrations of dissolved and total copper, total manganese, total nickel, dissolved and total selenium, and dissolved and total zinc ranged from 3 to 27 times larger at site 07103707 (FoCr_8th) than site 07103700 (FoCr_Manitou) during base flow, indicating a large source of trace elements between these two sites. Both of these sites are located on Fountain Creek, upstream from the confluence with Monument Creek. The likely source area is Gold Hill Mesa, a former tailings pile for a gold refinery located just upstream from the confluence with Monument Creek, and upstream from site 07103707 (FoCr_8th). Farther downstream in Fountain Creek, stormflow samples for total copper, manganese, lead, nickel, and zinc were larger at the downstream site near the city of Security, site 07105800 (FoCr_Security), than at the upstream site near Janitell Road, site 07105530 (FoCr_Janitell), compared with other main-stem sites and indicated a relatively large source of these metals between the two sites. Nitrogen, phosphorus, and trace-element loads substantially increased during stormflow. Suspended-sediment concentrations, discharges, and yields associated with stormflow were significantly larger than those associated with normal flow. The April through October cumulative suspended-sediment discharges and streamflows were largest in 1999 and smallest in 2002. Although large spatial variations in suspended-sediment yields occurred during normal flows, the suspended-sediment yields associated with stormflow generally were more than 10 times larger than the suspended-sediment yields that occurred during normal flow. The largest suspended-sediment yields occurred at sites on streams located in the Colorado Piedmont that drain to Fountain and Monument Creeks from the east. Minimum streamflows at all sites have the capacity to transport coarse sand and gravel, and maximum streamflows at some sites have the capacity to transport coarse gravel to cobble-size material. Channel downcutting is the predominant channel-forming process. Wastewater treatment-plant discharge increased streamflow and transport capacity, resulting in a shift in median bed-material size from fine to medium gravel.

Colorado↗
USGS2007

A graphical method for estimation of barometric efficiency from continuous data: Concepts and application to a site in the Piedmont, Air Force Plant 6, Marietta, Georgia

A graphical method that uses continuous water-level and barometric-pressure data was developed to estimate barometric efficiency. A plot of nearly continuous water level (on the y-axis), as a function of nearly continuous barometric pressure (on the x-axis), will plot as a line curved into a series of connected elliptical loops. Each loop represents a barometric-pressure fluctuation. The negative of the slope of the major axis of an elliptical loop will be the ratio of water-level change to barometric-pressure change, which is the sum of the barometric efficiency plus the error. The negative of the slope of the preferred orientation of many elliptical loops is an estimate of the barometric efficiency. The slope of the preferred orientation of many elliptical loops is approximately the median of the slopes of the major axes of the elliptical loops. If water-level change that is not caused by barometric-pressure change does not correlate with barometric-pressure change, the probability that the error will be greater than zero will be the same as the probability that it will be less than zero. As a result, the negative of the median of the slopes for many loops will be close to the barometric efficiency. The graphical method provided a rapid assessment of whether a well was affected by barometric-pressure change and also provided a rapid estimate of barometric efficiency. The graphical method was used to assess which wells at Air Force Plant 6, Marietta, Georgia, had water levels affected by barometric-pressure changes during a 2003 constant-discharge aquifer test. The graphical method was also used to estimate barometric efficiency. Barometric-efficiency estimates from the graphical method were compared to those of four other methods: average of ratios, median of ratios, Clark, and slope. The two methods (the graphical and median-of-ratios methods) that used the median values of water-level change divided by barometric-pressure change appeared to be most resistant to error caused by barometric-pressure-independent water-level change. The graphical method was particularly resistant to large amounts of barometric-pressure-independent water-level change, having an average and standard deviation of error for control wells that was less than one-quarter that of the other four methods. When using the graphical method, it is advisable that more than one person select the slope or that the same person fits the same data several times to minimize the effect of subjectivity. Also, a long study period should be used (at least 60 days) to ensure that loops affected by large amounts of barometric-pressure-independent water-level change do not significantly contribute to error in the barometric-efficiency estimate.

Georgia↗
USGS2010

Polychlorinated Biphenyls in suspended-sediment samples from outfalls to Meandering Road Creek at Air Force Plant 4, Fort Worth, Texas, 2003-08

Meandering Road Creek is an intermittent stream and tributary to Lake Worth, a reservoir on the West Fork Trinity River on the western edge of Fort Worth, Texas. U.S. Air Force Plant 4 (AFP4) is on the eastern shore of Woods Inlet, an arm of Lake Worth. Meandering Road Creek gains inflow from several stormwater outfalls as it flows across AFP4. Several studies have characterized polychlorinated biphenyls (PCBs) in the water and sediments of Lake Worth and Meandering Road Creek; sources of PCBs are believed to originate primarily from AFP4. Two previous U.S. Geological Survey (USGS) reports documented elevated PCB concentrations in surficial sediment samples from Woods Inlet relative to concentrations in surficial sediment samples from other parts of Lake Worth. The second of these two previous reports also identified some of the sources of PCBs to Lake Worth. These reports were followed by a third USGS report that documented the extent of PCB contamination in Meandering Road Creek and Woods Inlet and identified runoff from outfalls 4 and 5 at AFP4 as prominent sources of these PCBs. This report describes the results of a fourth study by the USGS, in cooperation with the Lockheed Martin Corporation, to investigate PCBs in suspended-sediment samples in storm runoff from outfalls 4 and 5 at AFP4 following the implementation of engineering controls designed to potentially alleviate PCB contamination in the drainage areas of these outfalls. Suspended-sediment samples collected from outfalls 4 and 5 during storms on March 2 and November 10, 2008, were analyzed for selected PCBs. Sums of concentrations of 18 reported PCB congeners (Sigma PCBc) in suspended-sediment samples collected before and after implementation of engineering controls are compared. At both outfalls, the Sigma PCBc before engineering controls was higher than the Sigma PCBc after engineering controls. The Sigma PCBc in suspended-sediment samples collected at AFP4 before and after implementation of engineering controls also is compared to the threshold effect concentration (TEC), the concentration below which adverse effects to benthic biota rarely occur. Sigma PCBc exceeded the TEC for 75 percent of the samples collected at outfall 4 and 67 percent of the samples collected at outfall 5 before the implementation of engineering controls. Sigma PCBc did not exceed the TEC in samples collected at either outfall 4 or outfall 5 after the implementation of engineering controls. The relative prominence of 10 selected PCB congeners was evaluated by graphical analysis of ratios of individual concentrations of the 10 PCB congeners to the sum of these PCB congeners. An overall decrease in concentrations of PCB congeners at outfalls 4 and 5 after implementation of engineering controls, as well as a shift in prominence from lighter, less chlorinated congeners to a heavier, more chlorinated congener might have resulted from the implementation of engineering controls. Because of the small number of samples collected and lack of runoff and precipitation data to evaluate comparability of sampling conditions before and after implementation of engineering controls, all conclusions are preliminary.

Texas↗
USGS2012

Flooded area and plant zonation in isolated wetlands in well fields in the Northern Tampa Bay Region, Florida, following reductions in groundwater-withdrawal rates

The extent and duration of the flooded area were compared in two reference wetlands and nine wetlands in well fields in the northern Tampa Bay region, Florida, to determine whether reductions in well-field groundwater-withdrawal rates resulted in increases in wetland flooded area. Flooded area, expressed as a percentage of the total wetland area, was used to provide a quantitative and comparable line of evidence for describing the hydrologic conditions in isolated wetlands of different sizes and locations. Flooded-area frequencies were quantified for periods with different groundwater-withdrawal rates that bracket reductions in well-field groundwater withdrawals. Four-year pre-reduction and post-reduction periods were applied to wetlands in Cypress Creek and Cross Bar Ranch well fields, whereas 3-year periods were applied to wetlands in Starkey well field. The reduced groundwater-withdrawal rates in Cypress Creek and Cross Bar Ranch well fields were 30 and 24 percent less than their pre-reduction rates, respectively. The reduced groundwater-withdrawal rate in the Starkey well field was 64 percent less. Total rainfall amounts were similar (differed by 1 percent or less) in the respective pre- and post-reduction periods, which minimized the effect that rainfall variability had on the analysis. Flooded-area patterns at the reference wetlands, which were unaffected by groundwater withdrawals, were similar during pre- and post-reduction periods, indicating that short-term rainfall variability within those periods did not affect the longer-term patterns of flooded-area extent and duration. One well-field wetland (W-33) experienced an extent and duration of flooded area similar to that observed at the reference wetlands. About 61–100 percent of W-33 was flooded 41 percent of the time during the pre-reduction period and 45 percent of the time in the post-reduction period. The amount of time the wetland was dry decreased from 40 percent in the pre-reduction period to 26 percent in the post-reduction period. The median elevation of the potentiometric surface of the Upper Floridan aquifer increased beneath this wetland by about 4 feet after reductions in groundwater-withdrawal rates. Four well-field wetlands (W-17, W-56, Starkey N, and Starkey 108) had substantial increases in the extent and duration of the flooded area after reductions in groundwater-withdrawal rates. These four wetlands were dry for 25–45 percent less time during the post-reduction period, when the pre- and post-reduction periods were compared. Up to 20 percent of W-56 was flooded more than three times as long after reductions in groundwater-withdrawal rates. All parts of W-17 were flooded for as much as 10 percent of the time in the post-reduction period. Parts of Starkey N and Starkey 108 were flooded for more than twice as much time after reductions in groundwater-withdrawal rates. The median elevation of the potentiometric surface of the Upper Floridan aquifer was about 4–8 feet higher beneath W-17 and W-56 after reductions in groundwater-withdrawal rates, whereas the median elevation increased beneath Starkey N and Starkey 108 by about 4 feet after reductions in groundwater-withdrawal rates. Four other well-field wetlands (W-41, Q-1, Starkey D, and Starkey E) were mostly dry before reductions in groundwater-withdrawal rates and remained mostly dry after the reductions. W-41 was dry 23 percent less time in the post-reduction period, but most of the increase in flooded area was confined to less than 20 percent of the total wetland area. Q-1 was dry for only 12 percent less time in the post-reduction period. The median elevation of the potentiometric surface of the Upper Floridan aquifer increased beneath W-41 by about 5 feet and beneath Q-1 by about 2 feet after reductions in groundwater-withdrawal rates. The extent and duration of the flooded area was unchanged at Starkey D when the post-reduction period was compared to the pre-reduction period. At Starkey E the extent of the flooded area decreased slightly during the post-reduction period. Even though groundwater-withdrawal rates at Starkey well field decreased in the post-reduction period, the median elevation of the potentiometric surface of the Upper Floridan aquifer did not increase beneath Starkey D and Starkey E after reductions in groundwater-withdrawal rates from this well field. Factors such as the high permeability of sediments beneath the wetlands, subsidence, or sinkholes could contribute to continued downward leakage from these four wetlands and the lack of recovery of wetland water levels. Plant zonation in the two reference wetlands and the nine well-field wetlands was described using data collected by the Southwest Florida Water Management District and Tampa Bay Water, a regional utility, in their Wetland Assessment Procedure (WAP). A scoring system was used to describe the distribution of trees, woody shrubs, and groundcover in zones at three depths along a transect line through each wetland. The locations of the three zones were identified on contoured wetland bathymetry maps and were discussed in relation to areas of the wetland bottom that flooded for different periods of time during the study. Higher scores are characteristic of a greater extent and duration of wetland flooded area. WAP scores and weighted average scores for wetland vegetation were generally consistent with the results of the flooded area analysis. The WAP scores and weighted average scores were higher overall and did not decline with time at four wetlands in well fields (W-33, W-56, Starkey N, and Starkey 108) during the years following reductions in groundwater-withdrawal rates. These four wetlands also had increases in the extent and duration of the flooded area during the post-reduction period. Scores for trees were more consistent than scores for shrubs and groundcover. WAP scores remained relatively low or generally declined at five well-field wetlands (Q-1, W-17, W-41, Starkey D, and Starkey E) during the years following reductions in groundwater-withdrawal rates, and weighted average scores either declined over time or remained low. These five wetlands either did not have an increase in the extent and duration of the flooded area, or if there was an increase, it was small.

Florida↗
USGS2012

Occurrence and potential transport of selected pharmaceuticals and other organic wastewater compounds from wastewater-treatment plant influent and effluent to groundwater and canal systems in Miami-Dade County, Florida

An increased demand for fresh groundwater resources in South Florida has prompted Miami-Dade County to expand its water reclamation program and actively pursue reuse plans for aquifer recharge, irrigation, and wetland rehydration. The U.S. Geological Survey, in cooperation with the Miami-Dade Water and Sewer Department (WASD) and the Miami-Dade Department of Environmental Resources Management (DERM), initiated a study in 2008 to assess the presence of selected pharmaceuticals and other organic wastewater compounds in the influent and effluent at three regional wastewater-treatment plants (WWTPs) operated by the WASD and at one WWTP operated by the City of Homestead, Florida (HSWWTP).

Florida↗
USGS2018

Simulation of zones of groundwater contribution to wells south of the Naval Weapons Industrial Reserve Plant in Bethpage, New York

A steady-state three-dimensional groundwater-flow model that simulates present conditions was coupled with the particle-tracking program MODPATH to delineate zones of contribution to wells pumping from the Magothy aquifer near a chlorinated volatile organic compound (VOC) plume. This modeling was part of a study by the U.S. Geological Survey in cooperation with the Naval Facilities Engineering Command to delineate groundwater near the Naval Weapons Industrial Reserve Plant in Bethpage, New York. Because rates of advection within the coarse-grained sediments typically exceed 0.1 foot per day, transport by dispersion and (or) diffusion was assumed to be negligible. Resulting zones of contribution are complex shapes, influenced by hydrogeologic features including confining beds and a basal gravel zone, and the interplay of nearby hydrologic stresses. The use of two particle tracking techniques identified zones of contribution to wells. Particles are backtracked from pumping well screens, and particles are forward tracked from the location of a VOC plume, as defined by surfaces of equal total VOC concentration. During any period of 5 years or less, about 1 to 3 percent of particles backtracked from pumping wells within a focus area intersected the 5-part per billion (ppb) VOC plume shell, indicating that the vast majority of particles were not sourced from the plume. During 5 years or less, none of the particles backtracked from pumping wells intersected the 50-ppb VOC plume shell. Forward-tracking techniques identified the fate of water within the VOC plume after 5 years as it moves toward ultimate well capture and (or) discharge to model constant head and drain boundaries. Out of 4,813 forward tracked particles started within the 50-ppb VOC plume shell, 1 forward-tracked particle was captured by well ANY8480. Out of 22,958 forward tracked particles started within the 5-ppb VOC plume shell, 100 were captured by production wells (less than 1 percent). The subset of forward pathlines that represent well plume capture are similar in number and shape to those of backtracked pathlines. Model simulations were conducted to assess uncertainties and improve understanding of how variability in hydraulic properties, pumpage rates, and maximum particle traveltime affect delineation of zones of contribution. By use of driller’s’ logs, a transitional probability approach generated nine alternative realizations of heterogeneity within the Magothy aquifer to assess uncertainty in model representation. Fine-grained sediments with low hydraulic conductivity were realized as laterally discontinuous, thickening towards the south, and comprising about 27 percent of the total aquifer volume within the transitional probability subgrid. Model simulations with alternative pumpage rates, porosity terms, and alternative maximum particle traveltime were also used to demonstrate how the size and shape of zones of contribution may vary.

New York↗
USGS2021

Assessment of contaminant trends in plumes and wells and monitoring network optimization at the Badger Army Ammunition Plant, Sauk County, Wisconsin

Soil and groundwater at the Badger Army Ammunition Plant (BAAP), Sauk County, Wisconsin, were affected by several contaminants as a result of production and waste disposal practices common during its operation from 1942 to 1975. Three distinct plumes of contaminated groundwater originate on BAAP property and extend off-site, as identified by previous studies. Routine sampling of groundwater quality from a network of monitoring wells and off-site private wells has been performed since 1990, although the number of wells monitored and the monitoring frequency have varied as the approved monitoring plan was modified. During the period of monitoring from 1990 to 2018, numerous site investigations and remedial actions were conducted to address the sources of contamination, contaminated soils, and groundwater. Concentrations of contaminants reportedly decreased between 2000 and 2012 within all three plumes. Five or six contaminants of concern (COCs) were identified for each of the three plumes. An independent assessment of the contaminant plumes and of the monitoring network was conducted using groundwater-quality data collected from more than 600 wells between 2000 and 2018. In a study conducted by the U.S. Geological Survey (USGS), in cooperation with the Army Environmental Command, a consistent data aggregation and interpolation scheme was applied to derive the likely maximum groundwater plume extents in four 3-year time periods between 2000 and 2018. The plume extent was defined by the Enforcement Standard for each COC and represents the maximum concentration observed in each 3-year time period. The plume boundary analysis shows that the spatial extent of groundwater contamination decreased for most COCs during the study period. Some plume boundaries are not well delineated by the existing monitoring network, particularly the downgradient edge of the Propellant Burning Ground plume. Maps identify the plume boundary in each time period, the sampling well network used to delineate the plume, and wells that were sampled in the 2010–12 period but not sampled in the 2015–18 period. A series of statistical analyses using the Monitoring and Remediation Optimization System, version 3.0, program were applied to the available COC concentration data for two distinct periods, 2000 to 2012 and 2013 to 2018, with the break between periods coinciding with changes to the monitoring network in 2013. Trends in the concentration of COCs in individual wells varied, although generally more wells had decreasing than had increasing concentrations for most COCs in both time periods. The exceptions were ethyl ether in the 2004–12 period and 2,6-dinitrotoluene in the 2013–18 period, for which more wells had an increasing trend. Spatial moment analysis of concentration data from the well network was used to assess the stability of each plume for the COCs. During the 2000–12 period, most of the contaminant plumes for which data were sufficient to complete the analysis were either decreasing or stable in mass and size. The exceptions were carbon tetrachloride (associated solely with the Propellant Burning Ground plume) and 2,4-dinitrotoluene and 2,6-dinitrotoluene (in the Deterrent Burning Ground plume), which showed an increasing trend in mass. No COCs showed an increasing trend in plume mass in the 2013–18 period. Some wells with increasing trends in concentration or with concentrations greater than the enforcement standard are near the tail of a plume, where increased monitoring may be of value to better define future plume boundaries. A spatial optimization analysis covering the 2013–18 period identified six wells that provided information redundant to that from other wells. A temporal optimization analysis identified optimal sampling frequencies for 125 wells. Remedial actions directed at the Propellant Burning Ground plume coincided with a general decrease in plume mass and size, although in specific areas and depths, the plume size for specific contaminants may still be increasing.

Wisconsin↗
USGS2025

Climate change impacts on plant communities in the sagebrush region—A science synthesis to inform Bureau of Land Management resource management

This report synthesizes current (2024) science-based knowledge related to the impacts of climate change on big sagebrush vegetation in Western North America. This effort was conducted through the U.S. Geological Survey working with the Bureau of Land Management as part of multiple science syntheses to aid management agencies developing environmental impacts assessments in response to human-related or caused events. This report reviews the potential impacts climate change may have on sagebrush vegetation and related management decisions. The body of the synthesis introduces the diverse impacts of climate change across the region by first focusing directly on what climate change may entail in terms of altered temperature and precipitation patterns. The report then discusses how these changes could likely affect individual plant species based on experimental results and scale the impacts to species distributions and community composition. The synthesis section ends by surveying efforts to model potential future changes in habitat. The report goes on to link the synthesis conclusions to individual land uses or land management decisions, such as forage resources, restoration or fuel treatment. Finally, the report provides a section that discusses the pros and cons of available datasets that model the potential future of vegetation in the sagebrush region.

Arizona, California, Colorado, Idaho, Montana, Nev↗
USGS2026

Treatability study to evaluate bioremediation of trichloroethene at Site K, former Twin Cities Army Ammunition Plant, Arden Hills, Minnesota, 2020–22

Executive Summary Chlorinated solvents, including trichloroethene (TCE) and other chlorinated volatile organic compounds (cVOCs), are widespread contaminants that can be treated by bioremediation approaches that enhance anaerobic reductive dechlorination. Reductive dechlorination can be enhanced either through the addition of an electron donor (biostimulation) or the addition of a known dechlorinating culture (bioaugmentation) along with an electron donor. Although bioremediation has been applied at many TCE-contaminated groundwater sites, application in source zones at sites where residual dense nonaqueous phase liquid (DNAPL) is present is more limited. In this study, laboratory and field treatability tests were completed to evaluate the potential application of anaerobic bioremediation for a shallow groundwater plume containing TCE in a perched alluvial aquifer at Site K, former Twin Cities Army Ammunition Plant, Arden Hills, Minnesota, which was on the National Priorities List as the New Brighton/Arden Hills Superfund site until 2019. In addition to the presence of residual DNAPL at the site, temporal variability in groundwater flow directions and input of oxygenated recharge were possible complicating factors for the application of enhanced anaerobic biodegradation in the shallow plume. The Site K plume extends beneath the footprint of Building 103, which was demolished in 2006, and soil excavations to a maximum depth of 6 feet (ft) below ground surface in 2014 were known to leave some deeper contaminated soil in place in the TCE source area. Groundwater treatment at the site, formalized as part of the 1997 Record of Decision, has been in operation since 1986 and consists of an extraction trench at the downgradient edge of the plume to collect groundwater, which is then pumped to an on-site air stripper. Groundwater concentrations in the plume have been relatively stable since treatment began, indicating a continued source of TCE in the aquifer. The desire for a destructive remedy that would enhance the removal of cVOCs in the aquifer at Site K and shorten the remediation timeframe led the U.S. Army to request that the U.S. Geological Survey conduct a groundwater treatability study to assess bioremediation. This report describes the U.S. Geological Survey bioremediation treatability study conducted during 2020–22, including pre-design site characterization to assist in formulating the bioremediation approach, laboratory experiments to support the design of the field pilot test, and implementation and 1-year performance monitoring results for the pilot test. Pre-design site characterization included the collection of soil cores for cVOC analysis and lithologic descriptions and the re-installment of three wells to obtain hydrologic measurements and initial groundwater chemistry. Relatively flat head gradients were measured at the site, and substantial decreases in water-level elevations occurred from spring to summer (May–July 2021). Continuous water-level monitoring indicated a rapid response to precipitation. Groundwater flow velocities were consistently less than 0.5 foot per day, and the pilot bioremediation test was therefore designed with short lateral distances (about 5 ft) between injection and individual monitoring points. Soil analyses confirmed that high volatile organic compound contamination was left in place in the source area. The highest concentrations were near or in clay at the base of the perched aquifer. Concentrations of cVOCs measured in the replaced wells were consistent with historical data and had a maximum TCE concentration of 57,700 micrograms per liter (μg/L), indicative of nearby residual DNAPL based on the general rule of observed concentrations exceeding 1 percent of solubility. The primary TCE daughter product detected was 1,2-cis-dichloroethene (cisDCE), which indicated limited reductive dechlorination in the plume. Groundwater in both the source and downgradient areas was relatively reducing during the pre-design characterization, particularly in the source area where methane concentrations greater than 400 μg/L were measured. Initial laboratory tests conducted using native aquifer microorganisms from the three replacement wells showed that anaerobic TCE biodegradation rates were low when biostimulated with the addition of sodium lactate as an electron donor, also known as a carbon donor, and resulted in the production of only cisDCE. Addition of a known dechlorinating culture, WBC-2, however, resulted in rapid biodegradation and production of ethene, verifying complete reductive dechlorination of TCE. Microcosms constructed with aquifer soil collected from the site were used to evaluate other electron donors besides lactate to support reductive dechlorination by WBC-2, including corn syrup as an alternative fast-release compound and whey, soy-based vegetable oil, and 3-D Microemulsion (Regenesis, San Clemente, California) as slow-release compounds. First-order rate constants for total organic chlorine removal in these WBC-2 amended microcosms were greatest with either lactate or vegetable oil as the donor, ranging between 0.061 and 0.047 per day or corresponding half-lives of 11–15 days. Testing of commercial products in other WBC-2-bioaugmented microcosms led to selection for the field pilot test of an emulsified vegetable oil product that also contained some sodium lactate as a fast-release donor. Delaying the addition of WBC-2 relative to the donor in the microcosms resulted in the most rapid overall biodegradation rates. The selected design for the pilot test utilized three separate test plots, each about 30-ft wide and 60-ft long: plots GS1 and GS2 in the source area of the plume and plot GS3 in the downgradient area of the plume near the excavation trench. Each test plot had one injection well, one monitoring well upgradient from the injection point, and 12 surrounding monitoring wells in a grid to capture variable groundwater flow directions. Donor injections, which included a bromide tracer, were completed in October 2021, immediately following baseline sampling, and the WBC-2 culture was injected about 40 days later, between November 30 and December 2, 2021. Performance monitoring conducted until December 2022 included hydrologic measurements and analyses of cVOCs, redox-sensitive constituents, dissolved organic carbon, bromide, volatile fatty acids, compound-specific carbon isotopes, and microbial communities. The biogeochemical data collected during the pilot tests in the three treatment plots showed that enhanced, complete reductive dechlorination of cVOCs in the groundwater was achieved in the GS1 and GS3 plots. In contrast, evidence of distribution of the injected amendments and subsequent biodegradation was limited in GS2, which was in an area of more heterogeneous soil lithology and low water table elevations. The molar composition of volatile organic compounds in the GS1 and GS3 plots was dominated by ethene in wells that were reached by the injected amendments by the end of the monitoring period. In the GS1 and GS3 plots, similar patterns were observed of cVOC concentrations decreasing to near detection levels, or below, at some wells sampled in July and October 2022, whereas ethene became dominant and indicated sustained complete reductive dechlorination. Baseline cVOC concentrations were more than a factor of 10 higher in the groundwater in the GS1 plot than in GS3, but no apparent inhibition of complete dechlorination occurred. As expected from the initial pre-design site data and the laboratory experiments, enhanced dissolution of residual DNAPL coupled to biodegradation was evident in the GS1 plot, where a marked increase in dichloroethene (DCE) above the initial baseline and upgradient TCE and DCE concentrations occurred. DCE concentrations subsequently declined where DNAPL dissolution was evident, concurrent with production of vinyl chloride and then predominantly ethene. Thus, overall biodegradation rates outpaced the DNAPL dissolution and desorption and DCE production in the source area. This success in complete degradation to predominantly ethene was achieved even in areas where the DCE concentrations reached a maximum of about 30,000 μg/L. Compound specific isotope analysis of carbon in TCE, cisDCE, trans-1,2-dichloroethene, and vinyl chloride was conducted to provide another line of evidence of the occurrence and extent of anaerobic biodegradation. Along a flow path in each plot that was affected by the injected amendments, carbon isotopes in the TCE and daughter cVOCs in the groundwater became isotopically heavier, indicating biodegradation. Enhanced biodegradation rates calculated from the field tests in GS1 and GS3 showed half-lives of 36.9–75.3 days for DCE degradation and 9.48–38.5 days for ethene production. Notably, these ethene production rates calculated from the field tests are consistent with the results of WBC-2-bioaugmented microcosms amended with either lactate or vegetable oil, which had half-lives for total organic chlorine removal that ranged from 11 to 15 days. These rates indicated rapid enhanced biodegradation, which is promising for application of a full-scale bioremediation remedy. Ultimately, however, the mass of residual or sorbed TCE in the aquifer that remains accessible for dissolution and biodegradation would likely control the time required for a full-scale bioremediation effort to achieve performance goals for TCE and cisDCE specified in the Record of Decision for Site K. The field pilot tests showed that the relatively low hydraulic head gradients and temporal changes in groundwater flow directions in the shallow aquifer would add complexity to a full-scale bioremediation effort. The radius of influence (ROI) at GS1 and GS3 (16.3 ft and 12.7 ft, respectively) were close to the design ROI of 15 ft. The estimated ROI at GS2 was about four times the design ROI, but may be less reliable at this location owing to groundwater flow direction. In addition, the low temperatures following WBC-2 injection in late November to early December 2021, in combination with the low hydraulic head gradients, were probably major factors in the delay observed before the onset of enhanced biodegradation following injection of the culture. Additional test injections could be beneficial to optimize the timing of donor and culture injections with the variable temperatures and hydraulic head in the shallow aquifer.

Minnesota↗
USGS2000

Computer-model analysis of ground-water flow and simulated effects of contaminant remediation at Naval Weapons Industrial Reserve Plant, Dallas, Texas

In June 1993, the Department of the Navy, Southern Division Naval Facilities Engineering Command (SOUTHDIV), began a Resource Conservation and Recovery Act (RCRA) Facility Investigation (RFI) of the Naval Weapons Industrial Reserve Plant (NWIRP) in north-central Texas. The RFI has found trichloroethene, dichloroethene, vinyl chloride, as well as chromium, lead, and other metallic residuum in the shallow alluvial aquifer underlying NWIRP. These findings and the possibility of on-site or off-site migration of contaminants prompted the need for a ground-water-flow model of the NWIRP area. The resulting U.S. Geological Survey (USGS) model: (1) defines aquifer properties, (2) computes water budgets, (3) delineates major flowpaths, and (4) simulates hydrologic effects of remediation activity. In addition to assisting with particle-tracking analyses, the calibrated model could support solute-transport modeling as well as help evaluate the effects of potential corrective action. The USGS model simulates steadystate and transient conditions of ground-water flow within a single model layer. The alluvial aquifer is within fluvial terrace deposits of Pleistocene age, which unconformably overlie the relatively impermeable Eagle Ford Shale of Late Cretaceous age. Over small distances and short periods, finer grained parts of the aquifer are separated hydraulically; however, most of the aquifer is connected circuitously through randomly distributed coarser grained sediments. The top of the underlying Eagle Ford Shale, a regional confining unit, is assumed to be the effective lower limit of ground-water circulation and chemical contamination. The calibrated steady-state model reproduces long-term average water levels within +5.1 or –3.5 feet of those observed; the standard error of the estimate is 1.07 feet with a mean residual of 0.02 foot. Hydraulic conductivity values range from 0.75 to 7.5 feet per day, and average about 4 feet per day. Specific yield values range from 0.005 to 0.15 and average about 0.08. Simulated infiltration rates range from 0 to 2.5 inches per year, depending mostly on local patterns of ground cover. Computer simulation indicates that, as of December 31, 1998, remediation systems at NWIRP were removing 7,375 cubic feet of water per day from the alluvial aquifer, with 3,050 cubic feet per day coming from aquifer storage. The resulting drawdown prevented 1,800 cubic feet per day of ground water from discharging into Cottonwood Bay, as well as inducing another 1,325 cubic feet per day into the aquifer from the bay. An additional 1,200 cubic feet of water per day (compared to pre-remediation conditions) was prevented from discharging into the west lagoon, east lagoon, Mountain Creek Lake, and Mountain Creek swale. Particle-tracking simulations, assuming an aquifer porosity of 0.15, were made to delineate flowpath patterns, or contaminant “capture zones,” resulting from 2.5- and 5-year periods of remediation activity at NWIRP. The resulting flowlines indicate three such zones, or areas from which ground water is simulated to have been removed during July 1996–December 1998, as well as extended areas from which ground water would be removed during the next 2.5 years (January 1999– June 2001). Simulation indicates that, as of December 31, 1998, the recovery trench was intercepting about 827 cubic feet per day of ground water that—without the trench—would have discharged into Cottonwood Bay. During this time, the trench is simulated to have removed about 3,221 cubic feet per day of water from the aquifer, with about 934 cubic feet per day (29 percent) coming from the south (Cottonwood Bay) side of the trench.

Texas↗
USGS2000

Field testing of passive diffusion bag samplers for volatile organic compound concentrations in ground water, Naval Industrial Reserve Ordnance Plant, Fridley, Minnesota, November 1999 and May 2000

Volatile organic compound concentrations from passive diffusion bag samplers were compared with concentrations from conventional purge (three or more casing volumes) sampling and low-flow purge sampling in side-by-side tests in 17 wells at the Naval Industrial Reserve Ordnance Plant, in Fridley, Minnesota. An initial comparison of 1,2-dichloroethene and trichloroethene concentrations obtained by using passive diffusion bag samplers and the conventional purge method in wells where one passive diffusion bag sampler was deployed showed good agreement at several wells but poor agreement at others. Collection of data from multiple diffusion samplers during the conventional purge sampling and during the low-flow sampling, however, suggests that the volatile organic compound concentrations from the passive diffusion bag samplers accurately reflect the volatile organic compound distribution in the screened interval, whereas the conventional purge and low-flow purge samples reflect mixing during pumping. The data also show that contaminant stratification was present in some wells. In one well, trichloroethene concentrations ranged from 470 to 1,600 micrograms per liter over a vertical distance of approximately 6 feet.

Water-Resources Investigations Report↗
USGS2002

Subsurface evaluation of the west parking lot and landfill 3 areas of Air Force Plant 4, Fort Worth, Texas, using two-dimensional direct-current resistivity profiling

During September 1999, the U.S. Geological Survey made 10 two-dimensional direct-current resistivity profile surveys in the west parking lot and landfill 3 areas of Air Force Plant 4, Fort Worth, Texas, to identify subsurface areas of anomalously high or low resistivity that could indicate potential contamination, contaminant pathways, or anthropogenic structures. Six of the 10 surveys (transects) were in the west parking lot. Each of the inverted sections of these transects had anomalously high resistivities in the terrace alluvium/fill (the surficial subsurface layer) that probably were caused by highly resistive fill material. In addition, each of these transects had anomalously low resistivities in the Walnut Formation (a bedrock layer immediately beneath the alluvium/fill) that could have been caused by saturation of fractures within the Walnut Formation. A high-resistivity anomaly in the central part of the study area probably is associated with pea gravel fill used in construction of a French drain. Another high resistivity anomaly in the west parking lot, slightly southeast of the French drain, could be caused by dense nonaqueous-phase liquid in the Walnut Formation. The inverted sections of the four transects in the landfill 3 area tended to have slightly higher resistivities in both the alluvium/fill and the Walnut Formation than the transects in the west parking lot. The higher resistivities in the alluvium/fill could have been caused by drier conditions in grassy areas relative to conditions in the west parking lot. Higher resistivities in parts of the Walnut Formation also could be a function of drier conditions or variations in the lithology of the Walnut Formation. In addition to the 10 vertical sections, four horizontal sections at 2-meteraltitude intervals show generally increasing resistivity with decreasing altitude that most likely results from the increased influence of the Walnut Formation, which has a higher resistivity than the terrace alluvium/fill.

Texas↗
USGS2003

Oxidation-reduction processes in ground water at Naval Weapons Industrial Reserve Plant, Dallas, Texas

Concentrations of trichloroethene in ground water at the Naval Weapons Industrial Reserve Plant in Dallas, Texas, indicate three source areas of chlorinated solvents?building 1, building 6, and an off-site source west of the facility. The presence of daughter products of reductive dechlorination of trichloroethene, which were not used at the facility, south and southwest of the source areas are evidence that reductive dechlorination is occurring. In places south of the source areas, dissolved oxygen concentrations indicated that reduction of oxygen could be the dominant process, particularly south of building 6; but elevated dissolved oxygen concentrations south of building 6 might be caused by a leaking water or sewer pipe. The nitrite data indicate that denitrification is occurring in places; however, dissolved hydrogen concentrations indicate that iron reduction is the dominant process south of building 6. The distributions of ferrous iron indicate that iron reduction is occurring in places south-southwest of buildings 6 and 1; dissolved hydrogen concentrations generally support the interpretation that iron reduction is the dominant process in those places. The generally low concentrations of sulfide indicate that sulfate reduction is not a key process in most sampled areas, an interpretation that is supported by dissolved hydrogen concentrations. Ferrous iron and dissolved hydrogen concentrations indicate that ferric iron reduction is the primary oxidation-reduction process. Application of mean first-order decay rates in iron-reducing conditions for trichloroethene, dichloroethene, and vinyl chloride yielded half-lives for those solvents of 231, 347, and 2.67 days, respectively. Decay rates, and thus half-lives, at the facility are expected to be similar to those computed. A weighted scoring method to indicate sites where reductive dechlorination might be likely to occur indicated strong evidence for anaerobic biodegradation of chlorinated solvents at six sites. In general, scores were highest for samples collected on the northeast side of the facility.

Texas↗
USGS2000

Use of borehole geophysical logs for improved site characterization at Naval Weapons Industrial Reserve Plant, Dallas, Texas

A shallow alluvial aquifer at the Naval Weapons Industrial Reserve Plant near Dallas, Texas, has been contaminated by organic solvents used in the fabrication and assembly of aircraft and aircraft parts. Natural gamma-ray and electromagnetic-induction log data collected during 1997 from 162 wells were integrated with existing lithologic and cone-penetrometer test log data to improve characterization of the subsurface alluvium at the site. The alluvium, consisting of mostly fine-grained, low-permeability sediments, was classified into low, intermediate, and high clay-content sediments on the basis of the gamma-ray logs. Low clay-content sediments were interpreted as being relatively permeable, whereas high clay-content sediments were interpreted as being relatively impermeable. Gamma-ray logs, cone-penetrometer test logs, and electromagnetic-induction logs were used to develop a series of intersecting sections to delineate the spatial distribution of low, intermediate, and high clay-content sediments and to delineate zones of potentially contaminated sediments. The sections indicate three major sedimentary units in the shallow alluvial aquifer at NWIRP. The lower unit consists of relatively permeable, low clay-content sediments and is absent over the southeastern and northwestern part of the site. Permeable zones in the complex, discontinuous middle unit are present mostly in the western part of the site. In the eastern and southeastern part of the site, the upper unit has been eroded away and replaced by fill material. Zones of potentially contaminated sediments are generally within the uppermost clay layer or fill material. In addition, the zones tend to be local occurrences.

Texas↗
USGS1982

Results of hydrologic tests and water-chemistry analyses, wells H-5A, H-5B, and H-5C, at the proposed Waste Isolation Pilot Plant site, southeastern New Mexico

Data were collected during hydrologic testing at wells H-5A, H-5B, and H-5C in the northeastern part of the proposed Waste Isolation Pilot Plant site in southeastern New Mexico. The three water-bearing zones tested, the Magenta and Culebra Dolomite Members of the Rustler Formation and the Rustler Formation-Salado Formation contact, yield water to wells at rates less than 0.6 gallon per minute. Throughout the testing, water-pressure response in the tested zone was monitored by a pressure-transducer system. Shut-in and slug tests were conducted to acquire data from which the following values were derived. Dissolved-solids concentrations In water samples were: (1) Magenta Dolomite Member, 6,090 milligrams per liter; (2) Culebra Dolomite Member, 144,000 milligrams per liter; and (3) Rustler Formation-Salado Formation contact, 412,000 milligrams per liter. The major chemical constituents of water samples from the Magenta Dolomite Member were sodium and sulfate; from the Culebra Dolomite Member, sodium and chloride; and from the Rustler Formation-Salado Formation contact, magnesium and chloride. Radium-226, a naturally occurring radioactive element, was present in samples from all three zones.

New Mexico↗
USGS1982

Geologic and well-construction data for the H-8 borehole complex near the proposed Waste Isolation Pilot Plant site, southeastern New Mexico

The H-8 complex, a group of three closely-spaced boreholes, is located 9 miles south of the proposed Waste Isolation Pilot Plant site in southeastern Eddy County, New Mexico. The holes were drilled during July, August, and September of 1979 to obtain geologic and hydrologic data to better define the regional ground-water-flow system. The geologic data presented in this report are part of a site-characterization study for the possible disposal of defense-associated radioactive wastes within salt beds of the Salado Formation of Permian age. The geologic data include detailed descriptions of cores, cuttings, and geophysical logs. Each borehole was designed to penetrate a distinct water-bearing zone: H-8a (total depth 505 feet) was completed just below the Magenta Dolomite Member of the Rustler Formation of Permian Age; H-8b (total depth 624 feet) was completed just belows the Culebra Dolomite Member of the Rustler Formation; and H-8c (total depth 808 feet) was completed just below the Rustler Formation-Salado Formation contact. The geologic units penetrated in borehole H-8c are surficial alluvium and eolian sand of Holocene age (0-4 feet); the Mescalero caliche (4-10 feet) and Gatuna Formation (10-153 feet) , both of Pleistocene age; and the Dewey Lake Red Beds (153-399 feet), the Rustler Formation (399-733 feet), and part of the Salado Formation penetrated by borehole H-8c is composed of residue from dissolution of halite and associated rocks, and the hydration of anhydrite to gypsum, indicating that the eastward-moving dissolution front on top of the Salado, found just to the west of the WIPP site, has reached the H-8 site. (USGS)

Water-Resources Investigations Report↗
USGS1982

Results of hydrologic tests and water-chemistry analyses, Wells H-6A, H-6B, and H-6C, at the proposed Waste Isolation Pilot Plant site, southeastern New Mexico

Hydrologic testing was conducted at wells H-6A, H-6B, and H-6C in the northwestern part of the proposed Waste Isolation Pilot Plant site in southeastern New Mexico to define hydraulic properties of three water-bearing zones. The zones tested were the Magenta and Culebra Dolomite Members of the Rustler Formation and the Rustler Formation-Salado Formation contact. The Magenta Dolomite and the Rustler-Salado contact yield water to wells at rates less than 0.5 gallon per minute as determined from shut-in and slug tests. A transmissivity value for the Culebra Dolomite Member was obtained by conducting conventional pumping and recovery tests in well H-6B; this well was pumped at a rate of approximately 11 gallons per minute. Water samples from the Magenta Dolomite Member of the Rustler Formation had a dissolved-solids concentration of 5,760 milligrams per liter. The major chemical constituents of water samples from this zone were sulfate, sodium, and chloride. Water samples from the Culebra Dolomite Member of the Rustler Formation had dissolved-solids concentration of 52,600 milligrams per liter, and samples from the Rustler Formation-Salado Formation contact had 316,000 milligrams per liter; chloride and sodium were the major constituents in the water samples. Radium-266, a naturally occurring radioactive element, was present in samples from all three zones.

New Mexico↗
USGS1983

Geohydrology of the proposed Waste Isolation Pilot Plant site, Los Medanos area, southeastern New Mexico

Geohydrologic data have been collected in the Los Medanos area at the U.S. Department of Energy 's proposed Waste Isolation Pilot Plant (WIPP) site in southeastern New Mexico since 1975 as part of an intensive study evaluating the feasibility of storing defense-associated nuclear wastes within the bedded salt of the Salado Formation of Permian age. Drilling and hydrologic testing have identified three principal water-producing zones above the salt, including the Rustler-Salado Formational contact and the Culebra and Magenta Dolomite Members of the Permian Rustler Formation. Below the bedded salt there is another water-bearing zone, the channel sandstones of the Bell Canyon formation of the Permian Delaware Mountain Group. Most data collected from 33 hydrologic test holes indicate that the water-bearing zones are characterized by low transmissivities and contain slightly saline to briny water. Data collected from drill-stem tests in the Bell Canyon Formation indicate the channel sandstones have hydraulic conductivities ranging from 0.02 to 0.36 feet per day grade vertically and laterally into siltstones and shales of very low permeability. The Rustler Formation contains the principal water-producing zones identified at the WIPP site. The Rustler-Salado formational contact has the least transmissivity, ranging from 0.00003 to 0.003 feet squared per day. The Culebra Dolomite is the most productive unit at the WIPP site with transmissivities ranging from 0.001 to 73 feet squared per day; the greater values result from fracturing in the dolomite created by dissolution of underlying halite. Minute vertical permeabilities prevent movement of water between hydrologic units. (USGS)

Water-Resources Investigations Report↗