Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “One Earth”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54Linked to original sources
USGS2002

Global Omori law decay of triggered earthquakes: Large aftershocks outside the classical aftershock zone

[1] Triggered earthquakes can be large, damaging, and lethal as evidenced by the1999 shocks in Turkey and the 2001 earthquakes in El Salvador. In this study, earthquakes with M s ≥ 7.0 from the Harvard centroid moment tensor (CMT) catalog are modeled as dislocations to calculate shear stress changes on subsequent earthquake rupture planes near enough to be affected. About 61% of earthquakes that occurred near (defined as having shear stress change ∣Δτ∣ ≥ 0.01 MPa) the M s ≥ 7.0 shocks are associated with calculated shear stress increases, while ∼39% are associated with shear stress decreases. If earthquakes associated with calculated shear stress increases are interpreted as triggered, then such events make up at least 8% of the CMT catalog. Globally, these triggered earthquakes obey an Omori law rate decay that lasts between ∼7–11 years after the main shock. Earthquakes associated with calculated shear stress increases occur at higher rates than background up to 240 km away from the main shock centroid. Omori's law is one of the few time‐predictable patterns evident in the global occurrence of earthquakes. If large triggered earthquakes habitually obey Omori's law, then their hazard can be more readily assessed. The characteristic rate change with time and spatial distribution can be used to rapidly assess the likelihood of triggered earthquakes following events of M s ≥ 7.0. I show an example application to the M = 7.7 13 January 2001 El Salvador earthquake where use of global statistics appears to provide a better rapid hazard estimate than Coulomb stress change calculations.

Journal of Geophysical Research B: Solid Earth↗
USGS1998

Time functions of deep earthquakes from broadband and short-period stacks

To constrain dynamic source properties of deep earthquakes, we have systematically constructed broadband time functions of deep earthquakes by stacking and scaling teleseismic P waves from U.S. National Seismic Network, TERRAscope, and Berkeley Digital Seismic Network broadband stations. We examined 42 earthquakes with depths from 100 to 660 km that occurred between July 1, 1992 and July 31, 1995. To directly compare time functions, or to group them by size, depth, or region, it is essential to scale them to remove the effect of moment, which varies by more than 3 orders of magnitude for these events. For each event we also computed short-period stacks of P waves recorded by west coast regional arrays. The comparison of broadband with short-period stacks yields a considerable advantage, enabling more reliable measurement of event duration. A more accurate estimate of the duration better constrains the scaling procedure to remove the effect of moment, producing scaled time functions with both correct timing and amplitude. We find only subtle differences in the broadband time-function shape with moment, indicating successful scaling and minimal effects of attenuation at the periods considered here. The average shape of the envelopes of the short-period stacks is very similar to the average broadband time function. The main variations seen with depth are (1) a mild decrease in duration with increasing depth, (2) greater asymmetry in the time functions of intermediate events compared to deep ones, and (3) unexpected complexity and late moment release for events between 350 and 550 km, with seven of the eight events in that depth interval displaying markedly more complicated time functions with more moment release late in the rupture than most events above or below. The first two results are broadly consistent with our previous studies, while the third is reported here for the first time. The greater complexity between 350 and 550 km suggests greater heterogeneity in the failure process in that depth range.

Journal of Geophysical Research B: Solid Earth↗
USGS1999

Coseismic slip resolution along a plate boundary megathrust: the Nankai Trough, southwest Japan

Geodetic survey measurements are used to estimate the coseismic slip distribution in the 1944 Tonankai (M w =8.1) and 1946 Nankaido (M w =8.3) earthquakes and to assess quantitatively the degree to which this slip is resolved on the plate boundary megathrust. Data used include 798 angle changes from triangulation surveys, 328 leveling section differences, and 5 coseismic tidal gage offsets. Many of the nominally coseismic triangulation data span ∼50 years, nearly half the earthquake cycle, and correction for interseismic deformation using post-1950 observations is applied. Microseismicity is used to define the configuration of the plate boundary interface and approximate it with a continuous, multisegment fault model. Because the onshore geodetic data have very limited resolving power for offshore fault segments, offshore coseismic slip was constrained by Satctke's [1993] estimation based on tsunami data. The majority of the coseismic slip occurs between 15 and 25 km depth. Although resolution declines toward the trench axis, it is sufficiently good to define two distinct high-slip regions, one off southeastern Shikoku Island (11 m maximum) and the other offshore of Kii Peninsula (3 m maximum). The slip magnitude off southeastern Shikoku, coupled with the plate convergence rate, would imply an recurrence interval of about 270 years, much-longer than the average repeat time of ∼120 years for historical great earthquakes on the Nankai Trough. However, the maximum coseismic slip is sensitive to the assumed fault geometry, and slippage on trough-parallel splay faults could significantly decrease the maximum slip to about 6 m.

Journal of Geophysical Research B: Solid Earth↗
USGS2021

Current activity on the Martian surface: A key subject for future exploration

One of the fundamental discoveries in Mars science in the last decade has been the extent and importance of current surface activity. Recent results have shifted our view of Mars from a world where the most interesting geologic events were in the distant past (similar to the Moon) to a world that undergoes active evolution and one where understanding the present is key to deciphering the planet’s history. When input was requested for the last Planetary Science Decadal Survey, some observations of surface changes had been published, but the number of detections was small and their significance not fully appreciated. Since that time, detections have proliferated, driven primarily by the long-term operation of the Mars Reconnaissance Orbiter (MRO) and the High Resolution Imaging Science Experiment (HiRISE) as well as landed observations of aeolian activity. In addition to observed changes, theory suggests that additional important surface processes are likely active but not yet observed because orbital data are limited in space and time and landed studies are rare. Understanding current Martian surface processes is a fundamental science question in itself, as it provides a test for physical and terrestrial analog-based models of specific geological processes acting under non-Earth planetary and environmental conditions. It is also an essential step for reading Mars’ geologic history and providing input to climate models: without understanding current dynamic processes, we cannot understand how they have varied during recent climate cycles, nor how they are reflected in ancient rock or modern ice records. Understanding the rates and types of current surface activity is also highly relevant to selecting geological samples, setting Planetary Protection rules, and understanding the hazards and environment that would be experienced by future human explorers.

Bulletin of the AAS↗
USGS2014

Forecasting distribution of numbers of large fires

Systems to estimate forest fire potential commonly utilize one or more indexes that relate to expected fire behavior; however they indicate neither the chance that a large fire will occur, nor the expected number of large fires. That is, they do not quantify the probabilistic nature of fire danger. In this work we use large fire occurrence information from the Monitoring Trends in Burn Severity project, and satellite and surface observations of fuel conditions in the form of the Fire Potential Index, to estimate two aspects of fire danger: 1) the probability that a 1 acre ignition will result in a 100+ acre fire, and 2) the probabilities of having at least 1, 2, 3, or 4 large fires within a Predictive Services Area in the forthcoming week. These statistical processes are the main thrust of the paper and are used to produce two daily national forecasts that are available from the U.S. Geological Survey, Earth Resources Observation and Science Center and via the Wildland Fire Assessment System. A validation study of our forecasts for the 2013 fire season demonstrated good agreement between observed and forecasted values.

Book↗
USGS2000

Gap analysis: Concepts, methods, and recent results

Rapid progress is being made in the conceptual, technical, and organizational requirements for generating synoptic multi-scale views of the earth's surface and its biological content. Using the spatially comprehensive data that are now available, researchers, land managers, and land-use planners can, for the first time, quantitatively place landscape units - from general categories such as 'Forests' or 'Cold-Deciduous Shrubland Formation' to more categories such as 'Picea glauca-Abies balsamea-Populus spp. Forest Alliance' - in their large-area contexts. The National Gap Analysis Program (GAP) has developed the technical and organizational capabilities necessary for the regular production and analysis of such information. This paper provides a brief overview of concepts and methods as well as some recent results from the GAP projects. Clearly, new frameworks for biogeographic information and organizational cooperation are needed if we are to have any hope of documenting the full range of species occurrences and ecological processes in ways meaningful to their management. The GAP experience provides one model for achieving these new frameworks.

Landscape Ecology↗
USGS2017

Temporal variation of tectonic tremor activity in southern Taiwan around the 2010 ML6.4 Jiashian Earthquake

Deep tectonic tremor, which is extremely sensitive to small stress variations, could be used to monitor fault-zone processes during large earthquake cycles and aseismic processes before large earthquakes. In this study, we develop an algorithm for the automatic detection and location of tectonic tremor beneath the southern Central Range of Taiwan and examine the spatio-temporal relationship between tremor and the 4 March 2010 ML6.4 Jiashian earthquake, located about 20 km from active tremor sources. We find that tremor in this region has a relatively short duration, short recurrence time, and no consistent correlation with surface GPS data. We find a short-term increase in the tremor rate 19 days before the Jiashian mainshock, and around the time when the tremor rate began to rise, one GPS station recorded a flip in its direction of motion. We hypothesize that tremor is driven by a slow-slip event that preceded the occurrence of the shallower Jiashian mainshock, even though the inferred slip is too small to be observed by all GPS stations. Our study shows that tectonic tremor may reflect stress variation during the pre-nucleation process of a nearby earthquake.

Journal of Geophysical Research B: Solid Earth↗
USGS2004

Patterns of magma flow in segmented silicic dikes at Summer Coon volcano, Colorado: AMS and thin section analysis

A complex pattern of magma flow is found in two silicic dikes of a radial swarm at Summer Coon, an eroded stratovolcano in southern Colorado. The two intrusions are broken into multiple segments that suggest vertical dike propagation. However, anisotropy of magnetic susceptibility (AMS) measurements and thin section observations suggest that magma flow was often subhorizontal and away from the center of the volcano. Segments that are proximal to the central intrusion are characterized by magma that flowed steeply upward at the proximal segment extremity, then laterally along the segment, and finally downward at the distal end of the segment. Magma flow in offset segment tips located far from the volcano center was subhorizontal towards the adjacent segment, implying lateral propagation of segment tips towards one another. This observation suggests relatively high driving pressure in distal dike segments, as supported by dike thickening with radial distance from the center of the volcano. The present study indicates that radial dike evolution at stratovolcanoes is dominated by lateral flow of magma and dike segmentation is a poor magma flow indicator. A horizontally propagating radial dike has the potential to cause an eruption low on the flank of a composite cone, which poses a significant yet largely unrecognized hazard to population centers and infrastructure that may surround the volcano.

Colorado↗
USGS1947

Reconnaissance report on geology of Eklutna Lake dam site and conduit route near Anchorage, Alaska

Summary and Recommendations 1. Eklutna Lake and Eklutna Creek lie in a wide, deep, glaciated, trough-like valley. Downstream from the lake, this valley is partially filled with unconsolidated glacial and alluvial deposits. 2. Eklutna Lake dam site, located about 400 feet below the lake outlet, is suitable for a low dam of flexible, earth-embankment type. Adequate control of the stream can be obtained by raising the lake level about 50 feet to altitude 910 feet, which will provide hold-over storage from wet years to dry years. Such a structure will have a crest length of about 1,950 feet. A. Bedrock is probably 200 to 475 feet below stream bed at the proposed axis. The dam will rest on glacial deposits of till, clay, sand and gravel, and on deposits of lake-shore and alluvial fan gravels. B. Geologic conditions in the area of the right abutment, as yet imperfectly known, may make necessary a long, deep cutoff extending for an unknown distance beyond the north end of the dam. C. A foundation exploration program is recommended that includes deepening test pit No. 1 and drill hole No. 2, and drilling 11 new holes. It is suggested that one drill hold near the center of the valley be taken to bedrock to give a complete picture of the fill materials underlying the foundation. 3. Delivery of water from the forebay of the reservoir to the powerhouse eight miles downvalley by means of a conduit is regarded as infeasible because: difficult terrain of the route will require earthwork more extensive than the volume of the dam; the route is subject to land slides, and will require expensive maintenance; it is more or less completely exposed to adverse winter conditions that may engender icing conditions; and it is easily subject to sabotage. It is recommended that the water be taken to the powerhouse through a rock tunnel.

Alaska↗
USGS2010

Reconnaissance dating: a new radiocarbon method applied to assessing the temporal distribution of Southern Ocean deep-sea corals

We have developed a rapid 'reconnaissance' method of preparing graphite for 14 C/ 12 C analysis. Carbonate (~15 mg) is combusted using an elemental analyzer and the resulting CO 2 is converted to graphite using a sealed tube zinc reduction method. Over 85% ( n =45 replicates on twenty-one individual corals) of reconnaissance ages measured on corals ranging in age from 500 to 33,000 radiocarbon years (Ryr) are within two standard deviations of ages generated using standard hydrolysis methods on the same corals, and all reconnaissance ages are within 300 Ryr of the standard hydrolysis ages. Replicate measurements on three individual aragonitic corals yielded ages of 1076±35 Ryr (standard deviation; n =5), 10,739±47 Ryr ( n =8), and 40,146±3500 Ryr ( n =9). No systematic biases were found using different cleaning methods or variable sample sizes. Analysis of 13 C/ 12 C was made concurrently with the 14 C/ 12 C measurement to correct for natural fractionation and for fractionation during sample processing and analysis. This technique provides a new, rapid method for making accurate, percent-level 14 C/ 12 C analyses that may be used to establish the rates and chronology of earth system processes where survey-type modes of age estimation are desirable. For example, applications may include creation of sediment core-top maps, preliminary age models for sediment cores, and growth rate studies of marine organisms such as corals or mollusks. We applied the reconnaissance method to more than 100 solitary deep-sea corals collected in the Drake Passage in the Southern Ocean to investigate their temporal and spatial distribution. The corals used in this study are part of a larger sample set, and the subset that was dated was chosen based on species as opposed to preservation state, so as to exclude obvious temporal biases. Similar to studies in other regions, the distribution of deep-sea corals is not constant through time across the Drake Passage. Most of the corals from the Burdwood Bank (continental shelf of Argentina) have ages ranging between 0 and 2500 calendar years, whereas most of the corals from the Sars Seamount in the Drake Passage have ages between 10,000 and 12,500 calendar years. Such differences may be caused in part by sampling biases, but may also be caused by changes in larval transport, nutrient supply, or other environmental pressures.

Deep-Sea Research Part I: Oceanographic Research P↗
USGS2012

Sources of shaking and flooding during the Tohoku-Oki earthquake: a mixture of rupture styles

Modeling strong ground motions from great subduction zone earthquakes is one of the great challenges of computational seismology. To separate the rupture characteristics from complexities caused by 3D sub-surface geology requires an extraordinary data set such as provided by the recent Mw9.0 Tohoku-Oki earthquake. Here we combine deterministic inversion and dynamically guided forward simulation methods to model over one thousand high-rate GPS and strong motion observations from 0 to 0.25 Hz across the entire Honshu Island. Our results display distinct styles of rupture with a deeper generic interplate event (~Mw8.5) transitioning to a shallow tsunamigenic earthquake (~Mw9.0) at about 25 km depth in a process driven by a strong dynamic weakening mechanism, possibly thermal pressurization. This source model predicts many important features of the broad set of seismic, geodetic and seafloor observations providing a major advance in our understanding of such great natural hazards.

Earth and Planetary Science Letters↗
USGS2013

A new model for the growth of basaltic shields based on deformation of Fernandina volcano, Galápagos Islands

Space-geodetic measurements of surface deformation produced by the most recent eruptions at Fernandina – the most frequently erupting volcano in the Galápagos Archipelago – reveal that all have initiated with the intrusion of subhorizontal sills from a shallow magma reservoir. This includes eruptions from fissures that are oriented both radially and circumferentially with respect to the summit caldera. A Synthetic Aperture Radar (SAR) image acquired 1–2 h before the start of a radial fissure eruption in 2009 captures one of these sills in the midst of its propagation toward the surface. Galápagos eruptive fissures of all orientations have previously been presumed to be fed by vertical dikes, and this assumption has guided models of the origin of the eruptive fissure geometry and overall development of the volcanoes. Our findings allow us to reinterpret the internal structure and evolution of Galápagos volcanoes and of similar basaltic shields. Furthermore, we note that stress changes generated by the emplacement of subhorizontal sills feeding one type of eruption may control the geometry of subsequent eruptive fissures. Specifically, circumferential fissures tend to open within areas uplifted by sill intrusions that initiated previous radial fissure eruptions. This mechanism provides a possible explanation for the pattern of eruptive fissures that characterizes all the western Galápagos volcanoes, as well as the alternation between radial and circumferential fissure eruptions at Fernandina. The same model suggests that the next eruption of Fernandina will be from a circumferential fissure in the area uplifted by the 2009 sill intrusion, just southwest of the caldera rim.

Galápagos Islands↗
USGS2026

Basal area loss from fire using field-calibrated remote sensing refines western US fire severity measurements

The spatial patterns of fire effects and tree mortality have profound consequences for forest resilience. Cost-effective, medium-resolution, and spatiotemporally extensive fire severity measurements are essential for informing post-fire restoration and improving our understanding of wildfires—from forest stands to continents and from days to decades. Remote sensing advancements have improved burn severity mapping, but methods vary in interpretability, scalability, generalizability, and alignment with field measurements. One meaningful metric of fire effects on forests is proportion basal area loss, but existing methods are limited by a lack of region-specific field reference data and a scalable mapping framework. To address these issues, we compiled 3280 field reference plots from 123 fires in forests across the Western US to calculate the proportion of fire-induced basal area loss. We then used spatially cross-validated machine learning models with concurrent hyperparameter tuning to select a skillful, parsimonious model from a large candidate set of remotely-sensed, climatic, and topographic predictors. Spectral-only measures of severity over- or underestimated basal area loss in dry versus wet years and across aspects, demonstrating the value of incorporating climatic and topographic context. We also tested model performance on a separate holdout dataset in the Southwest US as a demonstration of reproducibility and transparency. We provide a Google Earth Engine tool for estimating proportional basal area loss for any fire perimeter in the Western US, enabling rapid map creation for land management and ecological modeling. All code, model parameters, and training data are released to support reproducibility, community adoption, regional refinement, and adaptation to new regions.

western United States↗
USGS1987

In search of the Abrams post office, Trinity County

An understanding of earth history depends in part on stratigraphy, a division of geology in which the distinctive features of natural units or formations of layered rocks are studied and described and names are assigned to them. The procedures for describing and naming rock units in a uniform way are incorporated in documents known as stratigraphic codes. The North American Stratigraphic Code (1983) is currently used by most geologists in the United States when formation names are selected. Rock unit names consist of a geographic name, generally taken from a natural feature near the locality where the unit was first described, followed by a descriptive feature, usually the dominant rock type in the unit. Although the procedure for naming a rock unit seems straightforward, stratigraphic nomenclature can lead to confusion when the principles outlined in the stratigraphic code are ignored or incorrectly applied. This paper traces the naming of the Abrams Mica Schist, one of the major units of the northern California Klamath Mountains. It describes how uncertainty about the location of the geographic feature after which the unit was named has led to conflicting terminology. The search revealed some interesting history of the early days of mining in the Coffee Creek region of the Trinity Alps in Trinity County.

California Geology↗
USGS2000

Aquifer-system compaction and land subsidence: Measurements, analyses, and simulations – The Holly Site, Edwards Air Force Base, Antelope Valley, California

Land subsidence resulting from ground-water-level declines has long been recognized as a problem in Antelope Valley, California. At Edwards Air Force Base (EAFB), ground-water extractions have caused more than 150 feet of water-level decline, resulting in nearly 4 feet of subsidence. Differential land subsidence has caused sinklike depressions and earth fissures and has accelerated erosion of the playa lakebed surface of Rogers Lake at EAFB, adversely affecting the runways on the lakebed which are used for landing aircraft such as the space shuttles. Since 1990, about 0.4 foot of aquifer-system compaction has been measured at a deep (840 feet) borehole extensometer (Holly site) at EAFB. More than 7 years of paired ground-water-level and aquifer-system compaction measurements made at the Holly site were analyzed for this study. Annually, seasonal water-level fluctuations correspond to steplike variations in aquifer-system compaction; summer water-level drawdowns are associated with larger rates of compaction, and winter water-level recoveries are associated with smaller rates of compaction. The absence of aquifer-system expansion during recovery is consistent with the delayed drainage and resultant delayed, or residual, compaction of thick aquitards. A numerical one-dimensional MODFLOW model of aquitard drainage was used to refine estimates of aquifer-system hydraulic parameters that control compaction and to predict potential future compaction at the Holly site. The analyses and simulations of aquifer-system compaction are based on established theories of aquitard drainage. Historical ground-water-level and land-subsidence data collected near the Holly site were used to constrain simulations of aquifer-system compaction and land subsidence at the site for the period 1908-90, and ground-water-level and aquifer- system compaction measurements collected at the Holly site were used to constrain the model for the period 1990-97. Model results indicate that two thick aquitards, which total 129 feet or about half the aggregate thickness of all the aquitards penetrated by the Holly boreholes, account for most (greater than 99 percent) of the compaction measured at the Holly site during the period 1990-97. The results of three scenarios of future water-level changes indicate that these two thick aquitards account for most of the future compaction. The results also indicate that if water levels decline to about 30 feet below the 1997 water levels an additional 1.7 feet of compaction may occur during the next 30 years. If water levels remain at 1997 levels, the model predicts that only 0.8 foot of compaction may occur during the same period, and even if water levels recover to about 30 feet above 1997 water levels, another 0.5 foot of compaction may occur in the next 30 years. In addition, only a portion of the compaction that ultimately will occur likely will occur within the next 30 years; therefore, the residual compaction and associated land subsidence attributed to slowly equilibrating aquitards is important to consider in the long-term management of land and water resources at EAFB.

California↗
USGS2017

Dynamic rupture modeling of the M7.2 2010 El Mayor-Cucapah earthquake: Comparison with a geodetic model

The 2010 M w 7.2 El Mayor-Cucapah earthquake is the largest event recorded in the broader Southern California-Baja California region in the last 18 years. Here we try to analyze primary features of this type of event by using dynamic rupture simulations based on a multifault interface and later compare our results with space geodetic models. Our results show that starting from homogeneous prestress conditions, slip heterogeneity can be achieved as a result of variable dip angle along strike and the modulation imposed by step over segments. We also considered effects from a topographic free surface and find that although this does not produce significant first-order effects for this earthquake, even a low topographic dome such as the Cucapah range can affect the rupture front pattern and fault slip rate. Finally, we inverted available interferometric synthetic aperture radar data, using the same geometry as the dynamic rupture model, and retrieved the space geodetic slip distribution that serves to constrain the dynamic rupture models. The one to one comparison of the final fault slip pattern generated with dynamic rupture models and the space geodetic inversion show good agreement. Our results lead us to the following conclusion: in a possible multifault rupture scenario, and if we have first-order geometry constraints, dynamic rupture models can be very efficient in predicting large-scale slip heterogeneities that are important for the correct assessment of seismic hazard and the magnitude of future events. Our work contributes to understanding the complex nature of multifault systems.

California↗
USGS2012

Three-dimensional P and S velocity structure in the Coalinga Region, California

The Coalinga earthquake sequence of 1983 provided a unique opportunity to perform a three-dimensional velocity and hypocenter inversion in an area of complex three-dimensional structure dominated by folding and blind thrusts. Additionally, since other varied geological and geophysical studies have been completed in this area, the three-dimensional inversion solution could be compared to other interpretations. Inversion of 7696 P and 1511 S first arrivals from earthquakes and 696 P first arrivals from refraction shots produced a three-dimensional velocity model with grid spacing of 1–2 km in the hypocentral area. The overall shape and location of velocity features correspond well to the mapped surface geology. The three-dimensional inversion yields details of folds where the resolution is good and the general shape where resolution is lower. The amounts of structural relief inferred for the local folds are similar to values inferred from geologic data. The three-dimensional velocity solution has several distinctive features. There is a linear high-velocity body (6.1–6.5 km/s), about 25 km long, from 6 to 8 km depth, that may represent a fragment of Coast Range ophiolite. A shallow low-velocity zone (LVZ), which extends for 20 km along the fold axis at about 6 km depth and correlates with LVZs observed in both the refraction and the reflection data, may indicate high pore pressure caused by lateral compressive strain. Deeper LVZs occur within inferred Franciscan material and are characterized by horizontal or southwest dipping zones of varied thickness, 4–8 km wide and 5–10 km long. These LVZs may represent multiple thrust faults. Their locations and geometry are consistent with thrust faults inferred with seismic reflection data. The three-dimensional velocity solution compares well to prior two-dimensional seismic reflection and refraction models and observed gravity. The shape of the inferred sedimentary section agrees well with the reflections from the Cenozoic strata. Compared to the refraction model, the three-dimensional solution has similar velocities and similar locations of velocity features but is more detailed in the hypocentral zone where it uses more data. The gravity computed from the three-dimensional velocities is similar to the observed gravity in both shape and amplitude. Both a simple one-dimensional initial model and a complex initial model derived from the refraction interpretation were tried. A simple starting model gave the best results. The S velocity solution has different resolution than the P velocity solution because it uses a different set of stations, and it has lower resolution because it uses fewer arrival times. While the general patterns of velocity variation are similar for both V p and V s , the V s solution tends to have more smearing of velocity features and can have somewhat different locations of velocity features.

Journal of Geophysical Research Solid Earth↗
USGS2019

Earlier plant growth helps compensate for reduced carbon fixation after 13 years of warming

1. Drylands play a dominant role in global carbon cycling and are particularly vulnerable to increasing temperatures, but our understanding of how dryland ecosystems will respond to climatic change remains notably poor. Considering that the area of drylands is projected to increase 11–23% by 2100, understanding the impacts of warming on the functions and services furnished by these arid and semiarid ecosystems has numerous implications. 2.In a unique 13‐year ecosystem warming experiment in a southwestern U.S. dryland, we investigated the consequences of rising temperature on Achnatherum hymenoides , a widespread, keystone grass species on the Colorado Plateau. We tracked individual‐ and population‐level responses to identify optimal strategies that may have been masked if considering only one level of plant response. 3.We found several factors combined to affect the timing and magnitude of plant responses during the 13 th year of warming. These included large warming‐induced biomass increases for individual plants, an 8.5‐day advancement in the growing season, and strong reductions in photosynthetic rates and population cover. 4.Importantly, we observed a lack of photosynthetic acclimation and, thus, a warming‐induced down regulation of photosynthetic rates. However, these physiological responses were concurrent with warmed‐plant increases in growing season length and investment in photosynthetic surfaces, demonstrating the species' ability to balance carbon fixation limitations with warming. 5.These results, which bring together ecophysiological, phenological, reproductive, and morphological assessments of plant responses to warming, suggest that the extent of change in A. hymenoides populations will be based upon numerous adaptive responses that vary in their direction and magnitude. Plant population responses to climatic warming remain poorly resolved, particularly for Earth's drylands, and our in situ experiment assessing multiple strategies offers a novel look into a warmer world.

Utah↗