Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Facies”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54Linked to original sources
USGS1983

Slides showing quantitative models for mineral-resource assessment of the Rolla 1 degree x 2 degrees Quadrangle, Missouri

Th.is report consists of nineteen 35-mm color slides sh.owing digital synthesis and quantitative modeling of five geologic recognition criteria for assessment of Mississippi Valley-type resource potential in the Rolla 1° x 2° quadrangle, Missouri. The digital synthesis and quantitative modeling (Pratt and others, 1982) was done to supplement an earlier manual synthesis and evaluation (Pratt, 1981). The five criteria synthesized in this study, and the sources of data used, are that most known deposits are: In dolomite of the Bonneterre Formation, near the limestone-dolomite interface, which is defined as ls:dol = 1:16 (Thacker and Anderson, 1979; Kisvarsanyi, 1982); Near areas where insoluble residues of "barren" Bonneterre Formation contain anomalously high amounts of base metals (Erickson and others, 1978); Near areas of faults and fractures in the Bonneterre Formation or in underlying rocks (Pratt, 1982); In "brown rock" (finely crystalline brown dolomite) near the interface with "white rock" (coarsely recrystallized, white or very light gray, vuggy, illite-bearing dolomite) (Kisvarsanyi, 1982); Near or within favorably situated digitate reef-complex facies (Kisvarsanyi , 1982).

Open-File Report↗
USGS1983

Hornblende-rich, high grade metamorphic terranes in the southernmost Sierra Nevada, California, and implications for crustal depths and batholith roots

The southernmost Sierra Nevaaa widely exposes hornblende-rich, gneissic to granoblastic, amphibolite- to granulite-grade, metamorphic rocks and associated magmatic rocks, all of mid-Cretaceous age. Locally, red garnet, in part in euhedral crystals as large as 10 cm, as well as strongly pleochroic hyperstnene, characterize these rocks. These hornblende-rich rocks dominate the north slopes of the southern tail of the Sierra Nevada, but are also present as inclusion masses of various sizes in the dominantly granitic terrane to She northeast. The mafic, hornblende-rich rocks reflect a deeper crustal level than the dominantly granitic terrane to the northeast based on: 1) 'index' minerals (presence of hypersthene, coarse garnet, and brown hornblende; 2) textures (considerable ambivalence of whether individual samples are metamorphic or magmatic, 3) metamorphic grade (at least local granulite facies); and 4) the presence of migmatite, and the eviaence of local melting and mobilization. These rocks may be exposures of the upper part of the root zone and metamorphic substrate of the Sierra Nevada batholith. Xenoliths of gneiss, amphibolite, and granulite from sub-batholithic levels, that have been transported upward and preserved in volcanic rocks in the central Sierra Nevada, are similar to some exposed rocks of the southernmost Sierra Nevada. Hypersthene-bearing granulite and tonalite, as well as distinctive granofels of mid-Cretaceous age, are exposed in the western part of the Santa Lucia Range (some 300 km to the northwest across the San Andreas fault). These rocks have much in common with some of the metamorphic and magmatic rocks in the southernmost Sierra Nevada, suggesting that the two areas record similar metamorphic conditions and crustal depth. Mid-Cretaceous hypersthene granulite is rare, which makes correlation of the Santa Lucia Range and the southernmost Sierra Nevada seem attractive. Nevertheless, possibly significant petrographic anm rock distribution differences between the two areas (particularly the relative abundances of carbonate rocks and amphibolite) dictate caution in suggesting the two terranes were once contiguous.

Open-File Report↗
USGS1983

Geology of the Volga-Ural petroleum province and detailed description of the Ramashkino and Arlan oil fields

The Volga-Ural petroleum province is in general coincident with the Volga-Ural regional high, a broad upwarp of the east-central part of the Russian (East European) platform. The central part of the province is occupied by the Tatar arch, which contains the major share of the oil fields of the province. The Perm-Bashkir arch forms the northeastern part of the regional high, and the Zhigulevsko-Orenburg arch makes up the southern part. These arches are separated from one another by elongate downwarps. The platform cover overlies an Archean crystalline basement and consists of seven main sedimentation cycles as follows: 1) Riphean (lower Bavly) continental sandstone, shale, and conglomerate beds from 500 to 5,000 m thick deposited in aulacogens. 2) Vendian (upper Bavly) continental and marine shale and sandstone up to 3,000 m thick. 3) Middle Devonian-Tournaisian transgressive deposits, which are sandstone, siltstone, and shale in the lower part and carbonates with abundant reefs in the upper; thickness is 300-1,000 m. In the upper carbonate part is the Kamsko-Kinel trough system, which consists of narrow interconnected deep-water troughs. 4) The Visean-Namurian-Bashkirian cycle, which began with deposition of Visean clastics that draped over reefs of the previous cycle and filled in an erosional relief that had formed in some places on the sediments of the previous cycle. The Visean clastics are overlain by marine carbonates. Thickness of the cycle is 50-800 m. 5) Early Moscovian-Early Permian terrigenous clastic deposits and marine carbonate beds 1,000-3,000 m thick. 6) The late Early Permian-Late Permian cycle, which reflects maximum growth of the Ural Mountains and associated Ural foredeep. Evaporites were first deposited, then marine limestones and dolomites, which intertongue eastward with clastic sediments from the Ural Mountains. 7) Continental redbeds of Triassic age and mixed continental and marine elastic beds of Jurassic and Cretaceous age, which were deposited on the southern, southwestern, and northern margins of the Russian platform; they are generally absent in the Volga-Ural province, however. The Volga-Ural oil and gas basin is a single artesian system that contains seven aquifers separated by seals. The areas of greatest hydraulic head are in the eastern parts of the basin near areas where the aquifers crop out on the western slopes of the Ural Mountains. The Peri-Caspian basin is the principal drainage area of the artesian system. Approximately 600 oil and gas fields and 2,000 pools have been found in the Volga-Ural province. Nine productive sequences are recognized as follows: 1) Upper Proterozoic (Bavly beds), which are promising but not yet commercial. 2) Clastic Devonian, which contains the major reserves and includes the main pays of the super-giant Romashkino field. 3) Carbonate Upper Devonian and lowermost Carboniferous, which is one of the main reef-bearing intervals. 4) Visean (Lower Carboniferous) elastics, which are the main pays in the super-giant Arian field. 5) Carbonate Lower and Middle Carboniferous. 6) Clastic Middle Carboniferous Moscovian. 7) Carbonate Middle and Upper Carboniferous. 8) Carbonate-evaporite Lower Permian, which contains the major gas reserves and the lower part of the Melekess tar deposits. 9) Clastic-carbonate Upper Permian, which contains the major part of the Melekess tar deposits. The Volga-Ural province is divided into several productive regions on a basis of differences in structure, distribution of reservoir and source-rock facies, and general composition of the petroleum accumulations. These regions are the Tatar arch, Birsk saddle, Upper Kama depression, Perm-Bashkir arch, Ufa-Orenburg monocline, Melekess-Sernovodsko-Abdulino basin, Zhligulevsko-Orenburg arch, Ural foredeep, and north borders of the Peri-Casplan depression. Exploration activity has declined in recent years; however, interest remains high in several parts of the province, particula

Open-File Report↗
USGS1983

Stratigraphy, structure, and palinspastic synthesis of the western Brooks Range, northwestern Alaska

This report is an effort to describe and decipher the mid-Paleozoic to Lower Cretaceous stratigraphy and the orogenic evolution of the western Brooks Range. The western Brooks Range primarily is composed of stacks of complexly deformed thrust sheets that contain mostly coeval sequences of rocks with slightly different lithologic facies. In order to simplify the thrust-faulted stratigraphy and palinspastic restoration, the rocks are grouped into eight principal structural levels. The lowest structural level is believed to be autochthonous or parautochthonous and above that, each succeeding level is designated allochthon one through seven. Allochthon seven is composed of the remnants of an extensive ophiolite sheet. Allochthon six is composed of pillow basalt with subordinate intermediate volcanic rocks, chert, and Devonian limestone. It is not certain whether this allochthon was formed in a continental or oceanic setting. Allochthons five through one consist of distinctive and coeval sequences of Devonian to Lower Cretaceous sedimentary rocks that were deposited in a continental setting. The present geographic distribution of each structural level is shown on the allochthon map of the western Brooks Range. The stratigraphy of the southern part of northern Alaska has been reconstructed by systematically unstacking lower allochthons to the north of higher allochthons. The palinspastic map that results from this procedure shows that the minimum thrust displacement between allochthon seven and the autochthon is approximately 700 to 800 km. Schematic cross sections drawn across the palinspastic map show how the stratigraphy of the southern part of northern. Alaska most likely appeared prior to the orogeny. During Devonian and Mississippian time, the sedimentary sequences that are now part of allochthons one to five are inferred to have been deposited in an ensialic basin with both northern and southern margins. During Pennsylvanian time, the sequences seem to have become part of a southward-sloping continental shelf when a southern land area moved away from northern Alaska by an inferred plate tectonic process of rifting or strike-slip motion. In Early Jurassic time just prior to the Brooks Range orogeny, northern Alaska probably was an extensive continental shelf with oceanic conditions to the south and land to the north. The Brooks Range orogeny seems to have begun in the Middle Jurassic as the Arctic Alaska plate was underthrust (subducted) southward beneath oceanic crust of allochthon seven. At progressively later stages in the underthrusting process, the upper parts of the continental shelf were detached from the subthrust basement on which they were deposited, resulting in the other allochthons of the western Brooks Range. The period of major thrusting ceased by Albian time in the Early Cretaceous. During middle and Late Cretaceous time, epeirogenic uplift in the Brooks Range caused large quantities of clastic detritus to be shed into successor basins to the north and south. Broad folds and reverse faults in Upper Cretaceous sediments north of the Brooks Range provide evidence for a later period(s) of less intense deformation in northern Alaska.

Open-File Report↗
USGS1984

Reconnaissance geology of the Zarghat Quadrangle, sheet 26/40 B, Kingdom of Saudi Arabia

The Zarghat quadrangle is located in the northern Precambrian shield of Saudi Arabia between lat 26°30' and 27°00' N. and long 41°00' and 41°30 ' E. The area is underlain by three Precambrian volcanosedimentary units and a range of Precambrian dioritoid and granitoid plutonic intrusive rocks. Paleozoic(?) sandstone crops out in small areas in the northwestern part of the quadrangle, and a lobe of QuaternaryC?) basalt from Harrat Ithnain penetrates the southwest corner of the quadrangle. The Banana greenstone, the oldest unit in the quadrangle, is composed of basic to intermediate volcanic and subvolcanic rocks and minor interbedded marble that have been metamorphosed to greenschist-facies assemblages. The volcanic rocks range from basalt to andesite and dacite, and the subvolcanic rocks are diabase and diorite. Two less-metamorphosed Precambrian units, the Hadn formation and the Zarghat formation, unconformably overlie the Banana greenstone. The Hadn formation is composed of predominantly rhyolitic to dacitic volcanic rock and minor amounts of continental sedimentary rock; it is exposed only in the east half of the quadrangle. The Zarghat formation is also rhyolitic to dacitic volcanic rock but contains much more sedimentary rock that appears to have been deposited in a shallow-marine environment. The relation between these two formations is not clear at this time. Two groups of intrusive rocks are recognized on the basis of their ages relative to the Hadn and Zarghat formations. An older group is composed of hornblende quartz diorite, granodiorite, tonalite, and lesser amounts of granite. Tnese rocks intrude the Banana greenstone but predate the Hadn and Zarghat formations. Post-Hadn/Zarghat intrusive rocks are voluminous undivided granite, several varieties of alkali-feldspar granite, monzogranite, granophyre, hypabyssal rhyolite, aplite, diabase, and gabbro. The structural grain within the quadrangle appears to trend north-south. The Precambrian volcanosedimentary rocks and older plutonic rocks define three major north-trending lithologic belts. The Zarghat formation makes up the westernmost belt, and the Hadn formation comprises the easternmost belt. The central belt consists of Banana greenstone and older plutonic rocks. The north-south structural grain is crosscut by large plutons that postdate the Hadn and Zarghat formations. The dominant faults in the area belong to a northeast-trending system of shears; less common fault orientations are northwesterly, northerly, and east-westerly. Outcrops of magnesite in the southwest corner of the quadrangle constitute the only known economic potential in the area.

Open-File Report↗
USGS1985

Geology and regional setting of the Al Masane ancient mine area, southeastern Arabian Shield, Kingdom of Saudi Arabia

Stratiform zinc-copper massive-sulfide deposits at Al Masane occur in thin dolomitic interbeds within Proterozoic felsic crystal tuff and mafic flows and volcaniclastics. These strata dip steeply westward and are underlain by shale and shaly graywacke to the east and overlain by lapilli crystal tuff to the west. This section is part of the Habawnah fold or mineral belt that extends from the Wadi Wassat area southward into Yemen. Western parts of the Habawnah fold belt, including the Al Masane area, are characterized by a bimodal assemblage of of phenocryst-poor basalts and sodic rhyolite crystal tuff, and by zinc-copper mineral deposits. Strata in the eastern part of the belt, mostly east of the Ashara fault zone, contain abundant phenocryst-rich mafic volcanic rocks, little felsic crystal tuff, and barren or locally nickeliferous massive pyrite deposits. Stratified rocks and gabbro sills of the Al Masane area were isoclinally folded and metamorphosed to the greenschist facies. Structural analysis indicates that foliation, lineation, joints, major and minor folds, and one of three sets of faults formed during a single east-west compressional deformational episode. Axial-plane foliation dips steeply westward and is usually coincident with bedding. Lineation plunges steeply to the northwest throughout the map area and is parallel to the intersection of joints of two major sets and to the intersection of these joints with foliation. Major folds have north-trending, gently plunging axes to which the axis of a minor fold set is essentially parallel. A second minor fold-set has a steeply plunging axis parallel to lineation. The Saadah massive-sulfide body is elongated by a fold of this system. Unmetamorphosed Proterozoic felsic sills, quartz monzonite and gabbro plutons, porphyritic diorite dikes, mafic dikes, and basalt dikes, in that apparent order, have intruded the stratified section. Basalt dikes are offset by southwestward-dipping reverse faults and by faults parallel to bedding. Malachite and metal-oxide-bearing gossans in the Al Masane area were mined in ancient times. Radiocarbon dating of charcoal in slag indicates that the ores were smelted about 1,200 years ago. Gossans are depleted in copper, silver, and zinc, relative to underlying sulfide, by factors of about 0.33, 0.2, and 0.08, respectively. Evaluation of numerous analyses of gossans, carbonates, and silicate rocks indicates that exploration for zinc-copper massive-sulfide deposits in the region should center on detailed geochemical studies of dolomitic beds. Dolomitization of host siliceous shales and tuffs and the formation of the massive-sulfide bodies at Al Masane probably caused by submarine fumarolic hydrothermal activity during periods of relative volcanic quiescence. Further work in the Al Masane region should include a study of the dolomitized areas and a search for other potential alteration "pipe" products (e.g. chlorite) as a guide to location of proximal deposits. Zinc-copper deposits at Al Masane and in the Dhahar-Al Hajrah and Kutam-Farah Garan areas have characteristics in common and are associated with felsic volcanic centers in the western bimodal part of the Habawnah mineral belt. They probably have parallel origins related to sea-floor volcanism. Deposits at Al Masane and Dhahar-Al Hajrah are possibly in the same general stratigraphic interval. Characteristics and distribution of altered rocks at Kutam suggest that the observed structural control of mineralization may represent remobilization. Chemical characteristics of volcanic rocks at Al Masane and elsewhere, along with features such as zinc-copper-iron sulfide mineralization, rhyolite-basalt bimodality, and the quartz phenocryst-rich nature of the felsic rocks, are compatible with an unusually primitive tholeiitic island-arc origin for the strata and mineral deposits of the Habawnah mineral belt.

Open-File Report↗
USGS1988

Geologic map of the northwestern Caliente Range, San Luis Obispo County, California

The map area lies in the southern Coast Ranges of California, north of the Transverse Ranges and west of the southern San Joaquin Valley. This region is part of the Salinia-Tujunga composite terrane that is bounded on the northeast by the San Andreas fault (fig. 1) and on the southwest by the Nacimiento fault zone (Vedder and others, 1983). The Chimineas fault of this map is inferred to be the boundary between the Salinia and the Tujunga terranes (Ross, 1972; Vedder and others, 1983). Geologic mapping in the region of the California Coast Ranges that includes the area of this map has been largely the work of T.W. Dibblee, Jr. Compilations of geologic mapping at a scale of 1:125,000 (Dibblee, 1962, 1973a) provide the regional setting for this map, the northeast border of which lies about 6 to 7 km southwest of the San Andreas fault. Ross (1972) mapped the crystalline basement rocks in the vicinity of Barrett Creek, along the northeast side of the Chimineas fault ("Barrett Ridge" of Ross, 1972). Recent 1:24,000-scale mapping in the La Panza Range (fig. 1) (Vedder and others 1986a,b) overlaps onto the southwest edge of this map and provides useful information about the older rocks, mostly southwest of San Juan Creek. Stratigraphic knowledge of the area, which lies in the northern part of the middle Tertiary Cuyama basin, has evolved over a period of years beginning with the molluscan biostratigraphic work of Anderson and Martin (1914) and Loel and Corey (1932). Hill and others (1958) described the Tertiary stratigraphy of the region and proposed stratigraphic names. This stratigraphy was discussed further by Dibblee (1973b), and his revised nomenclature is used here. Stratigraphic studies in the southeastern Caliente Range (fig. 1) (Repenning and Vedder, 1961; Vedder, 1973) provided valuable information on the interrelations of continental, shallow-marine, and deeper marine facies in the southern part of the Cuyama basin, which have basinwide application. More recent stratigraphic studies by Lagoe (1984, 1985, 1987, 1988) further elaborate on aspects of Miocene basin history and paleogeography. Contributions to the tectonic history of the area have been made by Schwade and others (1958), on the basis of oil exploration in the Cuyama Valley area (fig. 1) in the 1940's and 1950's; by Bartow (1974), as part of a regional stratigraphic study; by Ballance and others (1983), on the basis of a study of Oligocene and early Miocene sedimentation; and most recently by Davis and others (1988) and Yeats and others (1988), who utilized a variety of new data from seismic reflection and from stratigraphic and structural studies. Field work for this map was done mostly in 1969-73 as part of a regional study of the Simmler and Vaqueros Formations (Bartow, 1974). Detailed field mapping was, therefore, concentrated on those units; other parts of the area were mapped by geologic reconnaissance and air-photo interpretation that were supplemented by data from published maps (Dibblee, 1973a; Vedder and others, 1986a,h). Mapping of the crystalline basement rocks at "Barrett Ridge" is from Ross (1972, plate 1). The structural style depicted in the accompanying cross sections favors the thrust belt concepts of Davis and others (1988) over the older interpretations of Dibblee (1962) or Cross (1962).

California↗
USGS1998

Preliminary lithostratigraphy, interpreted geophysical logs and hydrogeologic characteristics of the 98th Street core hole, Albuquerque, New Mexico

Core samples, cuttings, and numerous geophysical logs obtained from the 1560 ft (475.5 m) core hole drilled at 98th Street on the west side of Albuquerque provide key stratigraphic and hydraulicproperty information for the upper clastic sediments of the Santa Fe Group, which form the principal aquifer in the region. The core hole and an adjacent water-level monitoring well were drilled cooperatively by the U.S. Geological Survey (USGS) and the City of Albuquerque and investigated in collaboration with the New Mexico Bureau of Mines and Mineral Resources and the New Mexico Office of the State Engineer to improve understanding of aquifer characteristics and controls on ground-water availability and quality. The 751.5 ft (229 m) of core samples recovered from the core hole are the only undisturbed samples of nonlithified sediments of the upper part of the Santa Fe Group that have been collected in this area. These samples have allowed us, for the first time, to directly observe and characterize the lithic and sedimentologic features of this part of the section, and to correlate the detailed geologic features with geophysical-log characteristics, magnetic susceptibility measurements, hydraulic variables, and trace-element geochemistry. The adjacent well was designed to be an areally representative ground-water level and water-quality monitoring well for the Santa Fe Group aquifer. This report chiefly addresses the lithologic, stratigraphic, and hydrogeologic features determined from the 98th Street core hole; other reports address related characteristics. Previous geologic studies predicted the stratigraphy at the site to be, from the land surface downward: 1) Quaternary alluvial and eolian valley-border sediments; 2) fluvial sand and gravel of the upper unit of the Santa Fe Group (Ceja Member of the Santa Fe Formation of Kelly, 1978; equivalent to the Sierra Ledrones Formation of Machette (1978a); 3) downward-fining basin-floor silty clay deposits and 4) fluvial sandy and silty facies of the middle unit of the Santa Fe Group (the Middle Red Member of Bryan and McCann, 1937, and Lambert, 1968). New geologic interpretations indicate that the drill site is in a fault block bounded by east-dipping normal faults and the oblique Atrisco-Rincon fault zone. Core-hole sampling recovered 760.6 ft (231.8 m) of core, in core segments 2.1-2.375 in. (5.3-6 cm) in diameter, and 0.2-10 ft (6.1 cm-3 m) long. The core hole was cased with centered 3-in. PVC casing, and is available for geophysical logging. The monitoring-well hole contains four piezometers at depths of 1544 ft (470.6 m), 1112 ft (338.9 m), 749 ft (228.3 m), and 458 ft (139.6 m). Sediments in the core are loose to weakly cemented gravel, sand, silt, and clay, and lithified sandstone. Laboratory analyses of particle-size distributions of 28 channel samples show that most silty sand samples are uniformly graded and poorly sorted; medium sand samples are moderately sorted. Six principal sediment types are used to describe the core; these sediment types are repeated in various combinations throughout the core and are used to define 22 lithologic units in the cored interval. The six principal sediment types contain sequences of beds having similar modal grain size and sedimentary structure, and are listed in decreasing abundance: 1) Silty fine sand, poorly sorted, containing a coarse silt matrix. Geophysical logs show highly variable baselines with deflections that are related to clay beds and sequences of silt, clay, and sorted fine sand. Density values of 2.12-2.25 g/cc and porosity values of 30-35 percent are typical. 2) Medium sand, moderately to poorly sorted. Geophysical logs show baselines of low variability with deflections that are related to clay beds and sequences of silt, clay, and sorted fine sand. Density values of 2.05-2.20 g/cc and porosity values of 30-35 percent are typical. 3) Clayey sandy silt, poorly sorted, locally microlaminated clay and silt, generally nonplastic. Geophysical logs show highly variable baselines with deflections that are related to sequences of clay and fine sand. Density values of 2.1-2.2 g/cc and porosity values of 30-40 percent are typical. 4) Silt and clay, characteristically red to reddish brown and medium to high plasticity, massive to indistinctly microlaminated. Geophysical logs show variable baselines with broad, high-amplitude compound spikes that are related to sequences of silt and fine sand. Density values of 2.12-2.25 g/cc and porosity values of >45 percent are typical. 5) Sand and gravel, poorly sorted. Geophysical logs show variable baselines with deflections that are related to sequences of silty and sorted fine sand. 6) Sandstone, fine-to-medium grained, poorly sorted, cemented chiefly by calcite, which fills the original pore space. Geophysical logs show density values >2.25 g/cc and porosity values <30 percent. The 22 lithologic units are correlated with recognized basin-floor fluvial lithofacies (Hawley, 1996), which include sand and gravel (lithofacies I), sand with lenses of pebbly sand, silt, and silty clay (lithofacies II), and interbedded sand, silt, and silty clay (modified lithofacies III, IV, IX). The sediments in the core hole are correlated with three informal lithostratigraphic units. The top unit, 0-19 ft (0-5.8 m) depth, consists of Quaternary eolian sand and valley-border alluvium. Coarsegrained deposits in the 19-97 ft (5.8-29.6 m) interval are correlated with the upper unit of the Santa Fe Group. The fine-grained section in the 97-787 ft (29.6-239.9 m) interval is correlated tentatively with the middle unit of the Santa Fe Group. This section contains thick sequences of laminated red and olivebrown clay and silt overbank deposits (441-787 ft) in the distinctive Atrisco member of Connell and others (1998). The Atrisco is correlated with fine-grained zones in numerous wells throughout the central Albuquerque metropolitan area, and is recognized as a zone that separates the upper Santa Fe aquifer from underlying middle Santa Fe deposits. The lower section of the middle unit of the Santa Fe, 787-1500 ft (239.9-457.2 m) depth, includes an upper sequence of moderately sorted channel-fill medium sand, and a lower sequence of sand, silt, and clay overbank deposits. The age of the cored interval is not known precisely. The upper Santa Fe gravel is related regionally to a through-flowing river system that was established in the Rio Grande rift valleys in Early Pliocene time, >4.5 MA. The middle Santa Fe unit is dated tentatively by correlation with a fossiliferous section, in which sandy beds that directly underlie the upper Santa Fe are Late Miocene (Hemphellian), 4.6- 8.9 MA. Further, the middle Santa Fe unit, with dominantly normal magnetic polarity, may have been deposited during closely spaced normal magnetic chrons 5.9-8.3 Ma. Four hydrostratigraphic units summarize the hydrogeologic framework for the 98th Street site: 1) Quaternary valley-border deposits, 2) upper Santa Fe sand and gravel deposits, 3) middle Santa Fe overbank deposits, and 4) middle Santa Fe channel-sand deposits. Empirical values of horizontal hydraulic conductivity estimated from core samples reveal a previously unknown contrast in hydraulic conductivity in the lowest two hydrostratigraphic units. Correlations among numerous wells show that the distinctively fine-grained Atrisco member, with estimated hydraulic conductivities (K) of <0.02-17 ft/day, is a laterally extensive barrier to vertical ground-water flow. The underlying unit that contains moderately sorted medium sand is a potential aquifer production zone that should be investigated further. Laboratory determination of vertical hydraulic conductivity values for fine-grained core samples range from 10 -2 to 10 -7 ft/day; recompacted sandy samples have K values of 1 to 10 -2 ft/day. Results of tests conducted with increasing effective stress show that K values of all samples decrease with decreasing porosity. Comparison of K values from laboratory, empirical, and calculated geophysical values shows discrepancies of 1-3 orders of magnitude (ft/day), indicating that additional analyses of core samples and geophysical data are necessary for future characterization of the Santa Fe Group aquifer.

New Mexico↗
USGS1998

Characteristics of discrete and basin-centered parts of the Lower Silurian regional oil and gas accumulation, Appalachian basin: Preliminary results from a data set of 25 oil and gas fields

Oil and gas trapped in Lower Silurian "Clinton" sands and Medina Group sandstone constitute a regional hydrocarbon accumulation that extends 425 mi in length from Ontario, Canada to northeastern Kentucky. The 125-mi width of the accumulation extends from central Ohio eastward to western Pennsylvania and west-central New York. Lenticular and intertonguing reservoirs, a gradual eastward decrease in reservoir porosity and permeability, and poorly segregated gas, oil, and water in the reservoirs make it very difficult to recognize clear-cut geologic- and production-based subdivisions in the accumulation that are relevant to resource assessment. However, subtle variations are recognizable that permit the regional accumulation to be subdivided into three tentative parts: a western gas-bearing part having more or less discrete fields; an eastern gas-bearing part having many characteristics of a basin-centered accumulation; and a central oil- and gas-bearing part with "hybrid" fields that share characteristics of both discrete and basin-centered accumulation. A data set of 25 oil and gas fields is used in the report to compare selected attributes of the three parts of the regional accumulation. A fourth part of the regional accumulation, not discussed here, is an eastern extension of basin-centered accumulation having local commercial gas in the Tuscarora Sandstone, a proximal facies of the Lower Silurian depositional system. A basin-centered gas accumulation is a regionally extensive and commonly very thick zone of gas saturation that occurs in low-permeability rocks in the central, deeper part of a sedimentary basin. Another commonly used term for this type of accumulation is deep-basin gas accumulation. Basin-centered accumulation is a variety of continuous-type accumulation. The "Clinton" sands and Medina Group sandstone part of the basin-centered gas accumulation is characterized by: a) reservoir porosity ranging from about 5 to 10 percent; b) reservoir permeability equal to or less than 0.1 mD; c) low reservoir water saturation and an average water yield per well less than about 9 to 13 BW/MMCFG; d) a broadly defined updip water-block trap; e) underpressured reservoirs with a gradient ranging from 0.25 to 0.35 psi/ft; and f) reservoir temperature of at least 125° F (52° C). Other than for historical and location purposes, the term field has little or no meaning as an assessment unit for the regional accumulation. In practice, each designated field represents a production sweet spot having relatively high EURs per well that in turn merges with surrounding gas-productive regions that are generally larger in area but have lower EURs per well. This important feature of the Lower Silurian regional accumulation, whereby most wells drilled into it are gas productive, must be considered when assessing its potential for remaining recoverable gas resources. Most of the remaining gas resources reside in "Clinton" sands and Medina Group sandstone in the basin-centered part of the accumulation where as much as several tens of TCF of natural gas may be technically recoverable. The Tuscarora Sandstone in the eastern extension of the basin-centered part of the accumulation underlies a very large area and, although commonly characterized by very low porosity and permeability and low-Btu gas, probably contains additional gas resources. Remaining undiscovered recoverable gas and oil resources in the discrete and hybrid parts of the accumulation are primarily located beneath Lake Erie.

Maryland, New York, Ohio, Ontario, Pennsylvania, V↗
USGS1999

Lithostratigraphy, geophysics, biostratigraphy, and strontium-isotope stratigraphy of the surficial aquifer system of eastern Collier County and northern Monroe County, Florida

In 1997, ten cores were drilled in eastern Collier County and northern Monroe County, within the limits of the Big Cypress National Preserve. These cores represent a continuation of the study of seven cores in western Collier County begun in 1996 and reported in Weedman and others (1997) and Edwards and others (1998). This joint U.S. Geological Survey and Florida Geological Survey project is designed to acquire subsurface geologic and hydrologic data in southwest Florida to extend current ground-water models, thereby expanding the utility of these models for land and water management. In this report we describe the lithostratigraphy, geophysical logging, sedimentological analysis, dinocyst biostratigraphy, and strontium-isotope stratigraphy of these ten cores. The three geophysical logs (natural gamma-ray, induction conductivity, and neutron porosity) assumed to be related to formation lithology and water quality show that a number of clay-rich zones are present in all of the boreholes, and that pore-water conductivity increases with depth. The clay-rich zones are confirmed by visual examination of core material and sedimentological analysis. The relative transmissivity calculated at 10-foot-thick intervals shows that in six of the boreholes, high values are associated with the shallow aquifer in the 0-40 ft interval. Two of the boreholes (the most northerly and the most easterly) showed relatively higher values of transmissivity in permeable zones at or somewhat below 100 ft in depth. Core geology and logs indicate that the deeper aquifers are not more permeable than similar deeper zones in the other boreholes, but rather that the shallow aquifer appears to be less permeable in these two coreholes. The Arcadia (?) Formation was only penetrated in the deepest core where it is late Miocene in age. The Peace River Formation was penetrated in all but the two westernmost cores. It yields a late Miocene age, based on both dinocysts and strontium-isotope stratigraphy. The top is an irregular surface. Age and stratigraphic relations suggest that the upper part of the Peace River and lower part of the unnamed formation are at least partially equivalent laterally. The unnamed formation was recovered in every core. It is thinnest in the northernmost core and thickest to the west. Ages calculated from strontium isotopes range from 6.9 to 4.6 million years ago (late Miocene to early Pliocene). The top of the unnamed formation is deepest to the north and it becomes shallower to the southwest. The Tamiami Formation also was recovered in every core and consistently yields early Pliocene ages; it yields late Pliocene ages near the top in two cores. The age and lateral relations strongly suggest that the lower part of the Tamiami Formation and the upper part of the unnamed formation are lateral facies of each other. The Fort Thompson (?) Formation, Miami Limestone, and undifferentiated siliciclastic sediments and limestone at the very top of the cores were not dated.

Florida↗
USGS2000

Seismic reflection results from the GYRE 1997 cruise of the Bryant Canyon on the Louisiana Gulf Coast

The Texas-Louisiana continental slope is one of the few remaining frontiers for hydrocarbon exploration within the US Exclusive Economic Zone. This area has a complex seafloor morphology and highly discontinuous shallow stratigraphy that are the result of deformation by the highly mobile Louann salt that underlies much of this margin shoreward of the Sigsbee Escarpment.Gas hydrates exist both on the sea floor and at depth throughout the gas hydrate stability zone which extends to several hundred meters beneath the sea floor at greater water depths. Multibeam bathymetry, GLORIA sidescan sonar imagery, and site-specific studies have identified the presence of faults, mass-wasting deposits, variable sediment types, and gas hydrates exposed on the seafloor. The expression of these features on the seafloor suggests a tectonically active area. The distribution of these different processes and their relation to the subsurface stratigraphy and tectonic setting are not well understood, yet an understanding of these issues is essential as exploration extends into this deep-water area. To address the questions of surficial processes and their connection with deeper structures underlying this continental margin, a three-week cruise was conducted by the USGS in April, 1997 aboard the RV GYRE. The study area focussed on Bryant Canyon, a former submarine canyon, through which turbidity currents transported sands from a shelf-edge delta upslope of the study area to the Bryant Fan on the rise seaward of the base of the slope. The cruise was divided into two parts. The first part was devoted to collecting seismic-reflection profiles across parts of the canyon system to define the shallow stratigraphy and to determine the presence and distribution of gas hydrates in this area. Approximately 555 km of single-channel seismic-reflection data were collected during this first part of the cruise. A track map showing the locations of the profiles, low-resolution images of the profiles, and the SEG-Y format of these data are all presented on this CD-ROM. During the second part of the cruise, 38 piston cores were collected to describe the shallow subsurface facies of the study area. The coring data will be availible in an open file report to be published by Hans Nelson.

Lousiana↗
USGS1980

Revised nomenclature and stratigraphic relationships of the Fredericksburg Complex and Quantico Formation of the Virginia Piedmont

The Fredericksburg Complex, in part a migmatitic terrane in northeast Virginia, is subdivided on the basis of lithology, as well as aeromagnetic and aeroradiometric data, into two metamorphic suites. These suites are separated by the northeast-trending Spotsylvania lineament, a rectilinear geophysical feature that is probably the trace of an old fault zone. East of the lineament, the Po River Metamorphic Suite, of Proterozoic Z and (or) early Paleozoic age, consists dominantly of biotite gneiss, generally augen gneiss, and lesser amounts of hornblende gneiss and mica schist. West of the Spotsylvania lineament is the Ta River Metamorphic Suite, composed mostly of amphibolite and amphibole gneiss. However, to the southwest, along its strike belt, the Ta River contains abundant biotite gneiss and mica schist. Both the Ta River and Po River contain abundant foliated granitoid and pegmatoid bodies as concordant tabular masses and as crosscutting dikes; these rocks are considered part of the Ta River and Po River Metamorphic Suites. The amphibolitic Holly Corner Gneiss is interpreted to be a western allochthonous equivalent of the Ta River. Both the Ta River and Holly Corner are considered to be coeval, eastern, distal facies of the Lower Cambrian(?) Chopawamsic Formation. The Paleozoic Falls Run Granite Gneiss intrudes the Ta River Metamorphic Suite and the Holly Corner Gneiss; locally the Falls Run is interpreted to have been transported westward with the Holly Corner after intrusion. The Quantico Formation, in the core of the Quantico-Columbia synclinorium, rests with angular unconformity along its northwest and southeast limbs, respectively, on the Chopawamsic Formation and the Ta River Metamorphic Suite. The Quantico Formation is assigned the same Late Ordovician age and similar stratigraphic position as the Arvonia Slate of the Arvonia syncline. The youngest rocks of the area are the granitoid and pegmatoid bodies of the Falmouth Intrusive Suite. They consist of several generations of chiefly dikes and sills that are intrusive into the Fredericksburg Complex and into the Quantico Formation. Granitoid rocks also form small plutons. The Falmouth is isotopically dated as Carboniferous in age. Some of the metavolcanic rocks of the Evington Group and part of the amphibolite gneiss and amphibolite of the Hatcher Complex, named by W. B. Brown in 1969, are probably coeval with the Chopawamsic Formation and hence equivalents of the Ta River Metamorphic Suite and the Holly Corner Gneiss. The biotitic gneiss and granitoid rocks east of the Spotsylvania lineament in the Dillwyn area are considered to be coeval with the Po River Metamorphic Suite.

Virginia↗
USGS1979

Studies of the Permian Phosphoria Formation and related rocks, Great Basin-Rocky Mountain region

PART A: The transgression of the Permian Retort Phosphatic Shale Member of the Phosphoria Formation is dated by the occurrence of diagnostic brachiopods. The complex pattern of this transgression reflects the paleogeography and indicates two initial basins of deposition: one in southwestern Montana and one in southeastern Idaho. PART B: A new formation is proposed for middle Permian rocks of a transitional facies positioned laterally between the Rex Chert Member of the Phosphoria Formation in northeastern Utah and southeastern Idaho and the Plympton Formation in northeastern Nevada and northwestern Utah. PART C: The relationships of the Permian Park City Group to the Phosphoria and Park City Formations are clarified by the stratigraphy of four sections in northwestern Utah, northeastern Nevada, and southern Idaho. PART D: Five biostratigraphic zones based on the distribution of brachiopods and conodonts are proposed for the Park City Group. They are: the Peniculauris ivesi-Neostreptognathodus prayi Zone, the Peniculauris bassi-Neostreptognathodus sulcoplicatus Zone, the Peniculauris bassi-Neostreptognathodus sp. C Zone, the Thamnosia depressa Zone, and the Yakovlevia. multistriata-Neogondolella bitteri Zone. They range in age from Leonardian to Wordian.

Idaho, Montana, Nevada, Utah, Wyoming↗
USGS1984

The thrust belt in Southwest Montana and east-central Idaho

The leading edge of the Cordilleran fold and thrust in southwest Montana appears to be a continuation of the edge of the Wyoming thrust belt, projected northward beneath the Snake River Plain. Trces of the thrust faults that form the leading edge of the thrust belts are mostly concealed, but stratigraphic and structural evidence suggests that the belt enters Montana near the middle of the Centennial Mountains, continues west along the Red Rock River valley, and swings north into the Highland Mountains near Butte. The thrust belt in southwest Montana and east-central Idaho includes at least two major plates -- the Medicine Lodge and Grasshopper thrust plates -- each of which contains a distinctive sequence of rocks, different in facies and structural style from those of the cratonic region east of the thrust belt. The thrust plates are characterized by persuasive, open to tight and locally overturned folds, and imbricate thrust faults, structural styles unusual in Phanerozoic cratonic rocks. The basal decollement zones of the plates are composed of intensely sheared, crushed, brecciated, and mylonitized rocks, the decollement at the base of the Medicine Lodge plate is as much as 300 meters thick. The Medicine Lodge and Grasshopper thrust plates are fringed on the east by a 10- to 50-kilometer-wide zone of tightly folded rocks cut by imbricate thrust fauls, a zone that forms the eastern margin of the thrust belt in southwest Montana. The frontal fold and thrust zone includes rocks that are similar to those of the craton, even though they differ in details of thickness, composition, or stratigraphic sequence. The zone is interpreted to be one of terminal folding and thrusting in cratonic rocks overridden by the major thrust plates from farther west. The cratonic rocks were drape-folded over rising basement blocks that formed a foreland bulge in front of the thrust belt. The basement blocks are bounded by steep faults of Proterozoic ancestry, which also moved as tear faults during thrusting, and seem to have controlled the curving patterns of salients and reentrants at the leading edge of the thrust belt. Radiometric and stratiographic evidence shows that the thrust belt was in its present position by about 75 million year go.

Idaho;Montana↗
USGS1985

Geology and geochronology of granitoid and metamorphic rocks of late Archean age in northwestern Wisconsin

Granitoid rocks of the Puritan Quartz Monzonite and associated biotite gneiss and amphibolite in northwestern Wisconsin compose the southwestern part of the Puritan batholith of Late Archean age. They differ from rocks in the Michigan segment of the batholith in having been deformed by brittle-ductile deformation and partly recrystallized during shearing accompanying development of the midcontinent rift system of Keweenawan (Middle Proterozoic) age. Granitoid rocks ranging in composition from granite to tonalite are dominant in the Wisconsin part of the batholith. To the north of the Mineral Lake fault zone, they are massive to weakly foliated and dominantly of granite composition, whereas south of the fault zone they are more strongly foliated and mainly of tonalite composition. Massive granite, leucogranite, and granite pegmatite cut the dominant granitoid rocks. Intercalated with the granitoid rocks in small to large conformable bodies are biotite gneiss, amphibolite, and local tonalite gneiss. Metagabbro dikes of probable Early Proterozoic age as much as 15 m thick cut the Archean rocks. Rubidium-strontium whole-rock data indicate a Late Archean age for the granitoids and gneisses, but data points are scattered and do not define a single isochron. Zircon from two samples of tonalitic gneiss for uranium-thorium-Iead dating define a single chord on a concordia diagram, establishing an age of 2,735?16 m.y. The lower intercept age of 1,052?70 m.y. is in close agreement with rubidium-strontium and potassium-argon biotite ages from the gneisses. Two episodes of deformation and metamorphism are recorded in the Archean rocks. Deformation during the Late Archean produced a steep west-northwest-oriented foliation and gently plunging fold axes and was accompanied by low amphibolite-facies metamorphism of the bedded rocks. A younger deformation resulting from largely brittle fracture was accompanied by retrogressive metamorphism; this deformation is most evident adjacent to the Mineral Lake fault and took place during Keweenawan rifting about 1,050 m.y. ago. The Mineral Lake fault is one of several northwest-trending faults in the Lake Superior region that originated in the Late Archean and were reactivated intermittently during the Proterozoic, including Keweenawan time. The faults dominantly have right-lateral displacements. The Archean rocks of the Puritan batholith exposed in northwestern Wisconsin compose part of the greenstone-granite terrane, as defined in the Lake Superior region. These rocks were formed 2,7502,600 m.y. ago. The long dimension of the Puritan batholith as well as that of several batholiths in adjacent Minnesota are oriented sub parallel to the boundary between the greenstone-granite terrane and the older gneiss terrane, to the south. This conformity in trend is interpreted as indicating that the granite probably was emplaced after the two basement crustal segments had been joined.

Professional Paper↗
USGS1989

Geochemistry of the Floridan aquifer system in Florida and in parts of Georgia, South Carolina, and Alabama

The chemical quality of the ground water in the Floridan aquifer system is determined primarily by mineral-water interaction. However, some changes in water quality have been imposed by development, particularly near coastal pumping centers. A total of 601 chemical analyses, all from different wells, most completed in the upper part of the aquifer system, were used to describe the variations in water chemistry and to study the processes responsible for observed changes. The Floridan aquifer system is a vertically continuous sequence of Tertiary carbonate rocks that are of generally high permeability and are hydraulically connected in varying degrees. The rocks are principally limestone and dolomite, but they grade into limy sands and clays near the aquifer system's updip limits. Major minerals in the aquifer system are calcite, dolomite, and, locally, gypsum or quartz; minor minerals include apatite, glauconite, and clay minerals such as kaolinite and montmorillonite. Trace amounts of metallic oxides or sulfides are present in some areas. The aquifer system consists of the Upper and Lower Floridan aquifers, separated in most places by a less permeable confining unit that has highly variable hydraulic properties. Only the Upper Floridan aquifer is present throughout the study area. Freshwater enters the aquifer system in outcrop areas located primarily in central Georgia and north-central Florida. Discharge occurs chiefly to streams and springs and, to a lesser extent, directly into the sea. Most of the flow into and out of the system takes place where it is unconfined or where the upper confining unit is thin. Secondary permeability developed by dissolution of aquifer material is most prominent in these areas of dynamic flow. Dissolved-solids concentrations in water from the Upper Floridan aquifer generally range from less than 25 milligrams per liter near outcrops to more than 25,000 milligrams per liter along the coasts. The dominant cations in the ground water are Ca2+, Mg2+, and Na+; the dominant anions are HCO3-, Cl-, and SO42-, The concentration of Ca2+ is controlled primarily by calcite saturation. Concentrations of Mg2+, NA+, and Cl- are highest where mixing of freshwater and saltwater occurs. Concentrations of HCO3- reflect the control of calcite solubility. The concentration of SO42- is highest where gypsiferous rock units are present in the aquifer system. The major geochemical processes that occur in the Upper Floridan aquifer, based on water-quality maps and computations using a geochemical model, are (1) dissolution of aquifer minerals toward equilibrium, (2) mixing of ground water with recharge, leakage, or seawater, (3) sulfate reduction, and (4) cation exchange between water and aquifer minerals. Similar processes apparently control minor dissolved constituents, although quantification is difficult with the available data. Statistical tests of available nutrient data indicate that concentrations of N (nitrogen) species in unconfined recharge areas may be increasing over time; more detailed studies of all N species are needed to test this hypothesis, however. Data on trace metals, radionuclides, and man-made organic contaminants are limited. Available data indicate that most freshwater within the Upper Floridan is potable, but detection of pesticides in a few samples indicates that the system is susceptible to contamination from the land surface in some areas, particularly where its upper confining unit is thin or absent. Geochemical models were used to examine changes in major chemical elements along selected ground-water paths within the Upper Floridan aquifer. Water in the Upper Floridan aquifer can be categorized into four hydrochemical facies, whose exact distribution is determined by confined or unconfined conditions of the aquifer and by chloride concentrations. The reaction models are considered plausible based on available chemical, isotopic, and hydrologic information, and they

Alabama, Florida, Georgia, South Carolina↗
USGS1998

Geochemistry of the northern Atlantic Coastal Plain aquifer system

Sediments of the northern Atlantic Coastal Plain comprise a complex multiaquifer flow system. On a large scale (greater than 500 square miles) ground water in this system evolves from predominantly calcium magnesium bicarbonate water with a low dissolved-solids content and low pH, near outcrop-recharge areas, to predominantly sodium bicarbonate water with a high-dissolved solids content and high pH, downgradient. This sodium bicarbonate water then grades into a sodium chloride water. This large-scale predictable progression of hydrochemical facies results from the summation of many smaller scale geochemical processes that chiefly depend on the sedimentary depositional environments of the aquifers.

Northern Atlantic coastal plain↗
USGS1996

Hydrogeology of the Southeastern Coastal Plain aquifer system in Mississippi, Alabama, Georgia, and South Carolina

The Southeastern Coastal Plain aquifer system consists of a thick sequence of unconsolidated to poorly consolidated Cretaceous and Tertiary rocks that extend from Mississippi to South Carolina. Four regional sand and gravel aquifers are separated by three regional confining units of clay, shale, and chalk that do not conform everywhere to stratigraphic boundaries. The change in geologic facies is the most important factor controlling the distribution of transmissivity within the aquifer system.

Alabama, Georgia, Mississippi, South Carolina↗