Book review--"Coupled processes associated with nuclear waste repositories"
No abstract available.
Geochimica et Cosmochimica Acta↗
SEARCH · Geology Reports
Results for “Processes”
Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
238U-234U-230Th chronometry of Fe-Mn crusts: Growth processes and recovery of thorium isotopic ratios of seawater
Comparison of ( ( 234 U)excess ( 238 U ) "> 234 U) excess ⁄ ( 238 U) and ( ( 230 Th 232 Th "> 230 Th ⁄ 232 Th ) activity ratios in oceanic Fe-Mn deposits provides a method for assessing the closed-system behaviour of 238 U- 234 U- 230 Th, as well as variations in the initial uranium and thorium isotopic ratios of the precipitated metal oxides. This approach is illustrated using a Fe-Mn crust from Lotab seamount (Marshall Islands, west equatorial Pacific). Here we report uranium and thorium isotopic compositions in five subsamples from the surface of one large 5 cm diameter botryoid of this crust, and from two depth profiles of the outermost rim of the same botryoid. The decrease of ( ( 234 U)excess ( 238 U ) "> 234 U) excess ⁄ ( 238 U) and ( ( 230 Th 232 Th "> 230 Th ⁄ 232 Th ) activity ratio with depth in the two profiles gives mean growth rates, for the last 150 ka, of 7.8 ± 2 mm/Ma and 6.6 ± 1 mm/Ma, respectively. All data points (surface and core samples) but one, define a linear correlation in the Ln ( 230 Th 232 Th − Ln ( 234 U)excess ( 238 U ) "> Ln ( ( 230 Th 232 Th "> 230 Th ⁄ 232 Th ) −Ln[ ( ( 234 U)excess ( 238 U ) "> 234 U) excess ⁄ ( 238 U) ] diagram. This correlation indicates that for all points the U-Th system remained closed after the Fe-Mn layer precipitated, and that the different samples possessed the same initial Uranium and thorium isotope ratios. Furthermore, these results show that the preserved surface of this Fe-Mn crust may not be the present-day growth surface, and that the thorium and uranium isotopic ratios of seawater in west equatorial Pacific have not changed during the past 150 ka. The initial thorium activity ratio is estimated from the correlation obtained between Ln ( 230 Th 232 Th − Ln ( 234 U)excess ( 238 U ) "> Ln ( ( 230 Th 232 Th "> 230 Th ⁄ 232 Th ) −Ln Ln ( 230 Th 232 Th − Ln ( 234 U)excess ( 238 U ) ">[ ( ( 234 U)excess ( 238 U ) "> 234 U) excess ⁄ ( 238 U) ] .
Lotab Seamount, Pacific Ocean↗
Weathering processes and the composition of inorganic material transported through the Orinoco River system, Venezuela and Colombia
The composition of river-borne material in the Orinoco River system is related primarily to erosion regime, which in turn is related to tectonic setting; especially notable is the contrast between material derived from tectonically active mountain belts and that from stable cratonic regions. For a particular morpho-tectonic region, the compositional suites of suspended sediment, bed material, overback deposits, and dissolved phases are fairly uniform are are typically distinct from whose of other regions. For each region, a consistent set of chemical weathering reactions can be formulated to explain the composition of dissolved and solid loads. In developing these formulations, erosion on slopes and storage of solids in soils and alluvial sediments are important considerations. Compositionally verymature sediment is derived from areas of thick soils where erosion is transport limited and from areas where sediments are stored for extended periods of time in alluvial deposits. Compositionally immature sediments are derived from tectonically active mountain belts where erosion is weathering limited. Weathering-limited erosion also is important in the elevated parts of the Guayana Shield within areas of sleep topography. Compared to the mountain belts, sediments derived from elevated parts of the Shield are more mature. A greater degree of chemical weathering seems to be needed to erode the rock types typical of the Shield. The major-element chemistry and mineral composition of sediment delivered by the Orinoco River to the ocean are controlled by rivers that have their headwaters in mountain belts and cross the Llanos, a region of alluvial plains within the foreland basin. The composition of sediments in rivers that drain the Shield seems to be established primarily at the site of soil formation, whereas for rivers that drain the mountain belts, additional weathering occurs during s episodes of storage on alluvial plains as sediments are transported across the Llanos to the main stem of the Orinoco. After mixing into the main stem, there seems to be little subsequent alteration of sediment.
Orinoco River↗
Relation of salinity and selenium in shallow groundwater to hydrologic and geochemical processes, Western San Joaquin Valley, California
Salinity and selenium concentrations in shallow groundwater of the western San Joaquin Valley, California, are related to the geomorphology and hydrology of the alluvial fans. The highest salinity and selenium concentrations in shallow groundwater occur in alluvium deposited by ephemeral streams and at the margins of the major alluvial fans, where there were naturally saline, fine-grained soils. Low-to-moderate salinity and selenium concentrations in shallow groundwater are associated with upper and middle areas of the major alluvial fans deposited by intermittent streams. Areas with the most naturally saline soils have been irrigated in the last 40 years. These are now the areas of highest salinity and selenium concentrations in the shallow groundwater. Present-day (1986) groundwater salinity is spatially correlated with natural soil salinity in these areas. Isotopic data indicate that the highest salinity and selenium concentrations in groundwater present at low altitudes resulted from evaporative concentration when the water table was shallow.
California↗
Nitrate transport and transformation processes in unsaturated porous media
A series of experiments was conducted on two contrasting agricultural soils to observe the influence of soil texture, preferential flow, and plants on nitrate transport and denitrification under unsaturated conditions. Calcium nitrate fertilizer was applied to the surface of four large undisturbed soil cores (30 cm diameter by 40 cm height). Two of the cores were a structured clay obtained from central Missouri and two were an unstructured fine sand obtained from central Florida. The cores were irrigated daily and maintained at a matric potential of -20 kPa, representative of soil tension in the rooting zone of irrigated agricultural fields. Volumetric water content (θ), concentration of nitrate-N in the soil solution, and nitrous oxide flux at the surface, 10, 20, and 30 cm were monitored daily. Leaching loss of surface-applied N0 3 − -N was significant in both the sand and the clay. In unplanted sand cores, almost all of the applied nitrate was leached below 30 cm within 10 days. Gaseous N loss owing to denitrification was no greater than 2% of the nitrate-N applied to the unplanted sand cores and, in general, was less than 1 %. Although leaching was somewhat retarded in the clay cores, about 60% of the applied nitrate-N was leached from the unplanted clay soil in 5–6 weeks. Under unsaturated conditions, the clay had little to no tendency to denitrify despite the greater moisture content of the clay and retarded leaching of nitrate in the clay. The planted sand cores had surprisingly large gaseous N loss owing to denitrification, as much as 17% of the nitrate-N. Results from both the clay and sand experiments show that the dynamics of nitrate transport and transformation in unsaturated soils are affected by small, localized variations in the soil moisture content profile, the gaseous diffusion coefficient of the soil, the rate at which the nitrate pulse passes through the soil, the solubility of N 2 O and N 2 and the diffusion of the gasses through the soil solution, and development of a water content profile in the soil. Limited dentrification in the clay soil was due to a limited volume of soil available for infiltration after internal catchment and the development of denitrifying conditions resulting from the presence of an extensive macropore system.
Journal of Hydrology↗
Speculations on processes responsible for mesoscale current lineations on the continental shelf, southern California
A side-scan sonar survey of San Pedro shelf, California, reveals areas of mesoscale current lineations oriented approximately north-northeast in water depths of 20-25 m. Widths of sand ribbons range from 40 to 120 m and intervening erosional furrows, from 15 to 50 m. A conceptual model shows that the scale and orientation of current lineations agree with the dimensions and axial directions of Langmuir circulations theoretically generated by a combination either of southerly and southwesterly winds with regular trains of swell from the southern hemisphere or of two sets of wave trains crossing from the south and west. These longitudinal bedforms indicate shore-normal sediment transport at the times and on the areas of the shelf when and where they have been observed.
California↗
Distillation irrigation: A low-energy process for coupling water purification and drip irrigation
A method is proposed for combining solar distillation and drip irrigation to simultaneously desalinize water and apply this water to row crops. In this paper, the basic method is illustrated by a simple device constructed primarily of sheets of plastic, which uses solar energy to distill impaired water and apply the distillate to a widely spaced row crop. To predict the performance of the proposed device, an empirical equation for distillate production, dp , is developed from reported solar still production rates, and a modified Jensen-Haise equation is used to calculate the potential evapotranspiration, et , for a row crop. Monthly values for et and dp are calculated by using a generalized row crop at five locations in the Western United States. Calculated et values range from 1 to 22 cm month −1 and calculated dp values range from 2 to 11 cm month −1 , depending on the location, the month, and the crop average. When the sum of dp plus precipitation, dp + P , is compared to et for the case of 50% distillation irrigation system coverage, the results indicate that the crop's et is matched by dp + P , at the cooler locations only. However, when the system coverage is increased to 66%, the crop's et is matched by dp + P even at the hottest location. Potential advantages of distillation irrigation include the ability: (a) to convert impaired water resources to water containing no salts or sediments; and (b) to efficiently and automatically irrigate crops at a rate that is controlled primarily by radiation intensities. The anticipated disadvantages of distillation irrigation include: (a) the high costs of a system, due to the large amounts of sheeting required, the short lifetime of the sheeting, and the physically cumbersome nature of a system; (b) the need for a widely spaced crop to reduce shading of the system by the crop; and (c) the production of a concentrated brine or precipitate, requiring proper off-site disposal.
Agricultural Water Management↗
Acid neutralizing processes in an alpine watershed front range, Colorado, U.S.A.-1: Buffering capacity of dissolved organic carbon in soil solutions
Soil interstitial waters in the Green Lakes Valley, Front Range, Colorado were studied to evaluate the capacity of the soil system to buffer acid deposition. In order to determine the contribution of humic substances to the buffering capacity of a given soil, dissolved organic carbon (DOC) and pH of the soil solutions were measured. The concentration of the organic anion, Ai − , derived from DOC at sample pH and the concentration of organic anion, Ax − at the equivalence point were calculated using car☐yl contents from isolated and purified humic material from soil solutions. Subtracting Ax − from Ai − yields the contribution of humic substances to the buffering capacity (A equiv. − ). Using this method, one can evaluate the relative contribution of inorganic and organic constituents to the acid neutralizing capacity (ANC) of the soil solutions. The relative contribution of organic acids to the overall ANC was found to be extremely important in the alpine wetland (52%) and the forest-tundra ecotone (40%), and somewhat less important in the alpine tundra sites (20%). A failure to recognize the importance of organic acids in soil solutions to the ANC will result in erroneous estimates of the buffering capacity in the alpine environment of the Front Range, Colorado.
Colorado↗
Geochemical processes controlling selenium in ground water after mining, Powder River Basin, Wyoming, U.S.A.
Geochemical data for samples of overburden from three mines in the Powder River Basin indicate a statistically significant (0.01 confidence level) positive correlation ( r = 0.74) between Se and organic C. Results of factor analysis with varimax rotation on the major and trace element data from the rock samples indicate large (>50) varimax loadings for Se in two of the three factors. In Factor 1, the association of Se with constituents common to detrital grains indicates that water transporting the detrital particles into the Powder River Basin also carried dissolved Se. The large (>50) varimax loadings of Se and organic C in Factor 2 probably are due to the organic affinities characteristic of Se. Dissolved Se concentrations in water samples collected at one coal mine are directly related to the dissolved organic C concentrations. Hydrophilic acid concentrations in the water samples from the mine ranged from 35 to 43% of the total dissolved organic C, and hydrophobic acid concentrations ranged from 40 to 49% of the total dissolved organic C. The largest dissolved organic C concentrations in water from the same mine (34–302 mg/l), coupled with the large proportion of acidic components, may saturate adsorption sites on geothite and similar minerals that comprise the aquifer material, thus decreasing the extent of selenite (SeO 3 2− ) adsorption as a sink for Se as the redox state of ground water decreases.
Wyoming↗
Sources and fractionation processes influencing the isotopic distribution of H, O and C in the Long Valley hydrothermal system, California, U.S.A.
The isotopic ratios of H, O and C in water within the Long Valley caldera, California reflect input from sources external to the hydrothermal reservoir. A decrease in δD in precipitation of 0.5‰ km −1 , from west to east across Long Valley, is caused by the introduction of less fractionated marine moisture through a low elevation embayment in the Sierra Nevada Mountain Range. Relative to seasonal fluctuations in precipitation (−158 to −35‰.), δD ranges in hot and cold surface and groundwaters are much less variable (−135 to −105‰.). Only winter and spring moisture, reflecting higher precipitation rates with lighter isotopic signatures, recharge the hydrological system. The hydrothermal fluids are mixtures of isotopically heavy recharge (δD = − 115‰, δ 18 O = − 15‰) derived from the Mammoth embayment, and isotopically lighter cold water (δD = −135‰, δ 18 O = −18‰). This cold water is not representative of current local recharge. The δ 13 C values for dissolved carbon in hot water are significantly heavier (− 7 to − 3‰) than in cold water (−18 to −10‰) denoting a separate hydrothermal origin. These δ 13 C values overlie the range generally attributed to magmatic degassing of CO 2 . However, δ 13 C values of metamorphosed Paleozoic basement carbonates surrounding Long Valley fall in a similar range, indicating that hydrothermal decarbonization reactions are a probable source of CO 2 . The δ 13 C and δ 18 O values of secondary travertime and vein calcite indicate respective fractionation with CO 2 and H 2 O at temperatures approximating current hydrothermal conditions.
California↗
Modeling low-temperature geochemical processes:
This chapter provides an overview of geochemical modeling that applies to water–rock interactions under ambient conditions of temperature and pressure. Topics include modeling definitions, historical background, issues of activity coefficients, popular codes and databases, examples of modeling common types of water–rock interactions, and issues of model reliability. Examples include speciation, microbial redox kinetics and ferrous iron oxidation, calcite dissolution, pyrite oxidation, combined pyrite and calcite dissolution, dedolomitization, seawater–carbonate groundwater mixing, reactive-transport modeling in streams, modeling catchments, and evaporation of seawater. The chapter emphasizes limitations to geochemical modeling: that a proper understanding and ability to communicate model results well are as important as completing a set of useful modeling computations and that greater sophistication in model and code development is not necessarily an advancement. If the goal is to understand how a particular geochemical system behaves, it is better to collect more field data than rely on computer codes.
Book chapter↗
Process recognition in multi-element soil and stream-sediment geochemical data
Stream-sediment and soil geochemical data from the Upper and Lower Coastal Plains of South Carolina (USA) were studied to determine relationships between soils and stream sediments. From multi-element associations, characteristic compositions were determined for both media. Primary associations of elements reflect mineralogy, including heavy minerals, carbonates and clays, and the effects of groundwater. The effects of groundwater on element concentrations are more evident in soils than stream sediments. A "winnowing index" was created using ratios of Th to Al that revealed differing erosional and depositional environments. Both soils and stream sediments from the Upper and Lower Coastal Plains show derivation from similar materials and subsequent similar multi-element relationships, but have some distinct differences. In the Lower Coastal Plain, soils have high values of elements concentrated in heavy minerals (Ce, Y, Th) that grade into high values of elements concentrated into finer-grain-size, lower-density materials, primarily comprised of carbonates and feldspar minerals (Mg, Ca, Na, K, Al). These gradational trends in mineralogy and geochemistry are inferred to reflect reworking of materials during marine transgressions and regressions. Upper Coastal Plain stream-sediment geochemistry shows a higher winnowing index relative to soil geochemistry. A comparison of the 4 media (Upper Coastal Plain soils and stream sediments and Lower Coastal Plain soils and stream sediments) shows that Upper Coastal Plain stream sediments have a higher winnowing index and a higher concentration of elements contained within heavy minerals, whereas Lower Coastal Plain stream sediments show a strong correlation between elements typically contained within clays. It is not possible to calculate a functional relationship between stream sediment-soil compositions for all elements due to the complex history of weathering, deposition, reworking and re-deposition. However, depending on the spatial separation of the stream-sediment and soil samples, some elements are more highly correlated than others. Crown Copyright ?? 2009.
Applied Geochemistry↗
Atmospheric mercury accumulation and washoff processes on impervious urban surfaces
The deposition and transport of mercury (Hg) has been studied extensively in rural environments but is less understood in urbanized catchments, where elevated atmospheric Hg concentrations and impervious surfaces may efficiently deliver Hg to waterways in stormwater runoff. We determined the rate at which atmospheric Hg accumulates on windows, identified the importance of washoff in removing accumulated Hg, and measured atmospheric Hg concentrations to help understand the relationship between deposition and surface accumulation. The main study location was Toronto, Ontario. Similar samples were also collected from Austin, Texas for comparison of Hg accumulation between cities. Windows provided a good sampling surface because they are ubiquitous in urban environments and are easy to clean/blank allowing the assessment of contemporary Hg accumulation. Hg Accumulation rates were spatially variable ranging from 0.82 to 2.7 ng m-2 d-1 in Toronto and showed similar variability in Austin. The highest accumulation rate in Toronto was at the city center and was 5?? higher than the rural comparison site (0.58 ng m-2 d-1). The atmospheric total gaseous mercury (TGM) concentrations were less than 2?? higher between the rural and urban locations (1.7 ?? 0.3 and 2.7 ?? 1.1 ng m-3, respectively). The atmospheric particulate bound fraction (HgP), however, was more than 3?? higher between the rural and urban sites, which may have contributed to the higher urban Hg accumulation rates. Windows exposed to precipitation had 73 ?? 9% lower accumulation rates than windows sheltered from precipitation. Runoff collected from simulated rain events confirmed that most Hg accumulated on windows was easily removed and that most of the Hg in washoff was HgP. Our results indicate that the Hg flux from urban catchments will respond rapidly to changes in atmospheric concentrations due to the mobilization of the majority of the surface accumulated Hg during precipitation events. ?? 2008 Elsevier Ltd.
Atmospheric Environment↗
The effect of bathymetric filtering on nearshore process model results
Nearshore wave and flow model results are shown to exhibit a strong sensitivity to the resolution of the input bathymetry. In this analysis, bathymetric resolution was varied by applying smoothing filters to high-resolution survey data to produce a number of bathymetric grid surfaces. We demonstrate that the sensitivity of model-predicted wave height and flow to variations in bathymetric resolution had different characteristics. Wave height predictions were most sensitive to resolution of cross-shore variability associated with the structure of nearshore sandbars. Flow predictions were most sensitive to the resolution of intermediate scale alongshore variability associated with the prominent sandbar rhythmicity. Flow sensitivity increased in cases where a sandbar was closer to shore and shallower. Perhaps the most surprising implication of these results is that the interpolation and smoothing of bathymetric data could be optimized differently for the wave and flow models. We show that errors between observed and modeled flow and wave heights are well predicted by comparing model simulation results using progressively filtered bathymetry to results from the highest resolution simulation. The damage done by over smoothing or inadequate sampling can therefore be estimated using model simulations. We conclude that the ability to quantify prediction errors will be useful for supporting future data assimilation efforts that require this information.
Coastal Engineering↗
The role of habitat heterogeneity and canyon processes in structuring sediment macrofaunal communities associated with hard substrate habitats in Norfolk Canyon, USA
Topographic and hydrodynamic complexity in submarine canyons promotes steep gradients in food availability and geophysical parameters which affect ecological assemblages and beta diversity. While habitat heterogeneity in submarine canyons is known to support diverse and abundant megafaunal communities, due to difficulty in sampling little is known about infaunal communities adjacent to hard substrate habitats, their contribution to canyon assemblages, and overall deep-sea diversity. Sediments were collected in three distinct habitat types: within Norfolk Canyon (western Atlantic) adjacent to hard substrate habitats including canyon walls and large boulders, along the main axis of the canyon, and on the adjacent continental slope to quantify macrofaunal (>300 μm) density, diversity and community composition, and sediment geochemical parameters including grain size, organic content, and stable isotope composition. While macrofaunal densities were similar among habitats sampled at comparable depths, diversity was higher near the hard substrate environments. Discrete communities were present in each habitat type, while annelid functional composition was similar between hard substrate adjacent and canyon axis habitats. Although diversity and abundance of hard substrate adjacent sediment communities did not change with depth, communities were driven by sediments with low organic matter content, whereas canyon and slope community assemblages were best explained by depth and higher organic content. Beta diversity among hard substrate adjacent sediments and canyon axis communities was high, with 27% of canyon taxa and 10% of regional taxa only occurring in hard substrate habitats. Given the thousands of submarine canyons worldwide, our results highlight the overall importance of substrate habitat heterogeneity within canyons in supporting deep-sea benthic diversity and suggest that both within-canyon and regional diversity are underestimated.
Norfolk Canyon↗
Mars chronology: Assessing techniques for quantifying surficial processes
Currently, the absolute chronology of Martian rocks, deposits and events is based mainly on crater counting and remains highly imprecise with epoch boundary uncertainties in excess of 2 billion years. Answers to key questions concerning the comparative origin and evolution of Mars and Earth will not be forthcoming without a rigid Martian chronology, enabling the construction of a time scale comparable to Earth's. Priorities for exploration include calibration of the cratering rate, dating major volcanic and fluvial events and establishing chronology of the polar layered deposits. If extinct and/or extant life is discovered, the chronology of the biosphere will be of paramount importance. Many radiometric and cosmogenic techniques applicable on Earth and the Moon will apply to Mars after certain baselines (e.g. composition of the atmosphere, trace species, chemical and physical characteristics of Martian dust) are established. The high radiation regime may pose a problem for dosimetry-based techniques (e.g. luminescence). The unique isotopic composition of nitrogen in the Martian atmosphere may permit a Mars-specific chronometer for tracing the time-evolution of the atmosphere and of lithic phases with trapped atmospheric gases. Other Mars-specific chronometers include measurement of gas fluxes and accumulation of platinum group elements (PGE) in the regolith. Putting collected samples into geologic context is deemed essential, as is using multiple techniques on multiple samples. If in situ measurements are restricted to a single technique it must be shown to give consistent results on multiple samples, but in all cases, using two or more techniques (e.g. on the same lander) will reduce error. While there is no question that returned samples will yield the best ages, in situ techniques have the potential to be flown on multiple missions providing a larger data set and broader context in which to place the more accurate dates. ?? 2004 Elsevier B.V. All rights reserved.
Earth-Science Reviews↗