Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Natural Science”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53Linked to original sources
USGS2006

Towards sustainable management of Louisiana's coastal wetland forests: Problems, constraints, and a new beginning

Over 345,000 ha of forested swamps occur throughout the Mississippi River Deltaic Plain. Natural and anthropogenic changes in hydrology and geomorphology at local and landscape levels have reduced the productivity in many of these coastal wetland forests areas and have caused the complete loss of forest cover in some places. A summary and interpretation of the available science, suggestions for policy change, and a multidisciplinary (multi-responsibility) approach were needed to address these issues [in the context of private land]. In response, the Louisiana Governor's office formed a Coastal Wetland Forest Conservation and Use Science Working Group (SWG) and an associated Advisory Panel to provide the Governor with information and suggestions of strategies for environmental and economic utilization, conservation, and protection of Louisiana's coastal wetland forest ecosystem in the long-term. The process of engaging scientists, resource managers, and other stakeholders in this effort is described, and the recommendations of the SWG are presented relative to forestry practices and the potential for sustainable management of coastal wetland forests.

Louisiana↗
USGS2016

Arctic Research Plan: FY2017-2021

The United States is an Arctic nation—Americans depend on the Arctic for biodiversity and climate regulation and for natural resources. America’s Arctic—Alaska—is at the forefront of rapid climate, environmental, and socio-economic changes that are testing the resilience and sustainability of communities and ecosystems. Research to increase fundamental understanding of these changes is needed to inform sound, science-based decision- and policy-making and to develop appropriate solutions for Alaska and the Arctic region as a whole. Created by an Act of Congress in 1984, and since 2010 a subcommittee of the National Science and Technology Council (NSTC) in the Executive Office of the President, the Interagency Arctic Research Policy Committee (IARPC) plays a critical role in advancing scientific knowledge and understanding of the changing Arctic and its impacts far beyond the boundaries of the Arctic. Comprising 14 Federal agencies, offices, and departments, IARPC is responsible for the implementation of a 5-year Arctic Research Plan in consultation with the U.S. Arctic Research Commission, the Governor of the State of Alaska, residents of the Arctic, the private sector, and public interest groups.

Report↗
USGS2011

Characterization of salinity and selenium loading and land-use change in Montrose Arroyo, western Colorado, from 1992 to 2010

Salinity and selenium are naturally occurring and perva-sive in the lower Gunnison River Basin of Colorado, includ-ing the watershed of Montrose Arroyo. Although some of the salinity and selenium loading in the Montrose Arroyo study area is from natural sources, additional loading has resulted from the introduction of intensive irrigation in the water-shed. With increasing land-use change and the conversion from irrigated agricultural to urban land, land managers and stakeholders need information about the long-term effects of land-use change on salinity and selenium loading. In response to the need to advance salinity and selenium science, the U.S. Geological Survey, in cooperation with the Bureau of Reclamation, Colorado River Basin Salinity Control Forum, and Colorado River Water Conservation District, developed a study to characterize salinity and selenium loading and how salinity and selenium sources may relate to land-use change in Montrose Arroyo. This report characterizes changes in salinity and selenium loading to Montrose Arroyo from March 1992 to February 2010 and the magnitude of land-use change between unirrigated desert, irrigated agricultural, and urban land-use/land-cover types, and discusses how the respective loads may relate to land-use change. Montrose Arroyo is an approximately 8-square-mile watershed in Montrose County in western Colorado. Salinity and selenium were studied in Montrose Arroyo in a 2001 study as part of a salinity- and selenium-control lateral project. The robust nature of the historical dataset indicated that Montrose Arroyo was a prime watershed for a follow-up study. Two sites from the 2001 study were used to monitor salinity and selenium loads in Montrose Arroyo in the follow-up study. Over the period of 2 water years and respective irrigation seasons (2008-2010), 27 water-quality samples were collected and streamflow measurements were made at the historical sites MA2 and MA4. Salinity and selenium concen-trations, loads, and streamflow were compared between the pre-lateral-project and post-growth periods and between the post-lateral-project and post-growth periods. No significant differences in streamflow, salinity (concen-tration and load), or selenium (concentration and load) were found at MA4 between the pre-lateral project and post-growth periods or between the post-lateral-project and post-growth periods. The statistical analysis indicated no significant dif-ferences in streamflow or salinity (both concentration and load) between the pre-lateral-project and post-growth periods or between the post-lateral-project and post-growth periods at MA2; however, selenium concentrations and loads were significantly greater between the pre-lateral-project and post-growth periods and between the post-lateral-project and post-growth periods at MA2. Land-use change between MA4 and MA2 may have contributed to the determined differences in selenium values, but the specific mechanisms causing the increases between periods are unknown. The size of the urbanized area in Montrose Arroyo was quantified for 1993, 2002, and 2009 by using a geographic information system (GIS) with imagery from the specified years. The greatest change in land use from 1993 to 2009 was the increase of urban land due to conversion from irrigated agricultural land. The conversion of previously unirrigated desert to urban land or irrigated agriculture could become more common if urbanization and development expands into the eastern part of the watershed because a majority of the un-urbanized land in eastern Montrose Arroyo is unirrigated desert. By applying GIS to the City of Montrose 2008 com-prehensive growth plan, it was estimated that approximately 786 acres of previously irrigated agricultural land will be converted to urban land and 689 acres of unirrigated desert will be converted to urban land under the plan scenario. New development on previously unirrigated land in shale areas would likely increase the potential for mobilization of sele-nium and salinity from new sources to Montrose Arroyo and the Lower Gunnison River Basin.

Scientific Investigations Report↗
USGS2020

Landsat 9: Empowering open science and applications through continuity

The history of Earth observation from space is well reflected through the Landsat program. With data collection beginning with Landsat-1 in 1972, the program has evolved technical capabilities while maintaining continuity of land observations. In so doing, Landsat has provided a critical reference for assessing long-term changes to Earth's land environment due to both natural and human forcing. Poised for launch in mid-2021, the joint NASA-USGS Landsat 9 mission will continue this important data record. In many respects Landsat 9 is a clone of Landsat-8. The Operational Land Imager-2 (OLI-2) is largely identical to Landsat 8 OLI, providing calibrated imagery covering the solar reflected wavelengths. The Thermal Infrared Sensor-2 (TIRS-2) improves upon Landsat 8 TIRS, addressing known issues including stray light incursion and a malfunction of the instrument scene select mirror. In addition, Landsat 9 adds redundancy to TIRS-2, thus upgrading the instrument to a 5-year design life commensurate with other elements of the mission. Initial performance testing of OLI-2 and TIRS-2 indicate that the instruments are of excellent quality and expected to match or improve on Landsat 8 data quality. Landsat-9 will maintain the current data acquisition rate of up to 740 scenes per day, with these scenes available from the Landsat archive at no cost to users. In this communication, we provide background and rationale for the Landsat 9 mission, describe the instrument payloads and ground system, and discuss data products available from the Landsat 9 mission through USGS.

Remote Sensing of Environment↗
USGS2014

Late Holocene vegetation, climate, and land-use impacts on carbon dynamics in the Florida Everglades

Tropical and subtropical peatlands are considered a significant carbon sink. The Florida Everglades includes 6000-km 2 of peat-accumulating wetland; however, detailed carbon dynamics from different environments within the Everglades have not been extensively studied or compared. Here we present carbon accumulation rates from 13 cores and 4 different environments, including sawgrass ridges and sloughs, tree islands, and marl prairies, whose hydroperiods and vegetation communities differ. We find that the lowest rates of C accumulation occur in sloughs in the southern Everglades. The highest rates are found where hydroperiods are generally shorter, including near-tails of tree islands and drier ridges. Long-term average rates of 100 to >200 g C m −2 yr −1 are as high, and in some cases, higher than rates recorded from the tropics and 10–20 times higher than boreal averages. C accumulation rates were impacted by both the Medieval Climate Anomaly and the Little Ice Age, but the largest impacts to C accumulation rates over the Holocene record have been the anthropogenic changes associated with expansion of agriculture and construction of canals and levees to control movement of surface water. Water management practices in the 20th century have altered the natural hydroperiods and fire regimes of the Everglades. The Florida Everglades as a whole has acted as a significant carbon sink over the mid- to late-Holocene, but reduction of the spatial extent of the original wetland area, as well as the alteration of natural hydrology in the late 19th and 20th centuries, have significantly reduced the carbon sink capacity of this subtropical wetland.

Florida↗
USGS2024

Habitat and dissolved organic carbon modulate variation in the biogeochemical drivers of mercury bioaccumulation in dragonfly larvae at the national scale

We paired mercury (Hg) concentrations in dragonfly larvae with water chemistry in 29 U.S. national parks to highlight how ecological and biogeochemical context (habitat, dissolved organic carbon [DOC]) influence drivers of Hg bioaccumulation. Although prior studies have defined influences of biogeochemical variables on Hg production and bioaccumulation, it has been challenging to determine their influence across diverse habitats, regions, or biogeochemical conditions within a single study. We compared global (i.e., all sites), habitat-specific, and DOC-class models to illuminate how these controls on biotic Hg vary. Although the suite of important biogeochemical factors across all sites (e.g., aqueous Hg, DOC, sulfate [SO42−], and pH) was consistent with general findings in the literature, contrasting the restricted models revealed more nuanced controls on biosentinel Hg. Comparing habitats, aqueous (filtered) total mercury (THg) and SO42− were important in lentic systems whereas aqueous (filtered) methylmercury (MeHg), DOC, pH, and SO42− were important in lotic and wetland systems. The ability to identify important variables varied among habitats, with less certainty in lentic (model weight (W) = 0.05) than lotic (W = 0.11) or wetland habitats (W = 0.23), suggesting that biogeochemical drivers of bioaccumulation are more variable, or obscured by other aspects of Hg cycling, in these habitats. Results revealed a contrast in the importance of aqueous MeHg versus aqueous THg between DOC-classes: in low-DOC sites (<8.5 mg/L), availability of upstream inputs of MeHg appeared more important for bioaccumulation; in high-DOC sites (>8.5 mg/L) THg was more important, suggesting a link to in-situ controls on bioavailability of Hg for MeHg production. Mercury bioaccumulation (indicated by bioaccumulation factor) was more efficient in low DOC-class sites, likely due to reduced partitioning of aqueous MeHg to DOC. Together, findings highlight substantial variation in the drivers of Hg bioaccumulation and suggest consideration of these factors in natural resource management and decision-making.

Science of the Total Environment↗
USGS2012

GeoChip-based analysis of microbial functional gene diversity in a landfill leachate-contaminated aquifer

The functional gene diversity and structure of microbial communities in a shallow landfill leachate-contaminated aquifer were assessed using a comprehensive functional gene array (GeoChip 3.0). Water samples were obtained from eight wells at the same aquifer depth immediately below a municipal landfill or along the predominant downgradient groundwater flowpath. Functional gene richness and diversity immediately below the landfill and the closest well were considerably lower than those in downgradient wells. Mantel tests and canonical correspondence analysis (CCA) suggested that various geochemical parameters had a significant impact on the subsurface microbial community structure. That is, leachate from the unlined landfill impacted the diversity, composition, structure, and functional potential of groundwater microbial communities as a function of groundwater pH, and concentrations of sulfate, ammonia, and dissolved organic carbon (DOC). Historical geochemical records indicate that all sampled wells chronically received leachate, and the increase in microbial diversity as a function of distance from the landfill is consistent with mitigation of the impact of leachate on the groundwater system by natural attenuation mechanisms.

Oklahoma↗
USGS2015

Legacy effects of no-analogue disturbances alter plant community diversity and composition in semi-arid sagebrush steppe

Questions (i) What role does the type of managed disturbance play in structuring sagebrush steppe plant communities? (ii) How does the composition of post-disturbance plant communities change with time since disturbance? (iii) Does plant community diversity change over time following managed disturbance? Location Field study within the sagebrush steppe ecosystem. Rich County, Utah, USA. Methods We developed a chronosequence spanning up to 50 yrs post-treatment to study sagebrush steppe vegetation dynamics. Direct ordination was used to examine plant community composition by managed disturbance type and time since disturbance, and factorial analysis of covariance was used to examine diversity dynamics following disturbance. Indicator species values were calculated in order to identify characteristic species for each disturbance type. Results Plant communities experienced a shift toward distinct community composition for each of the three managed disturbance types, and gave no indication of returning to untreated community composition or diversity. Small post-disturbance increases in the number of non-native grass species were observed in the treatments relative to reference, with native forb species making the largest contribution to altered composition. On fire- and chemically-treated sites the proportional native forb species richness increased over time since disturbance, while the proportional contribution of non-native forbs to total species richness decreased. For all three treatment types, native grasses contributed less on average to total richness than on reference sites, while non-native grasses made up a higher proportion of total richness. Conclusions Common shrubland management techniques have legacy effects on the composition and diversity of sagebrush steppe plant communities, and no-analogue disturbances, such as chemical or mechanical treatments, have more pronounced legacy effects than treatments similar to natural disturbance regimes (fire). This study informs a broader understanding of how management actions affect natural systems by highlighting the importance of long-term management legacies as drivers of plant community structure and function.

Utah↗
USGS2000

Self-ordering and complexity in epizonal mineral deposits

Epizonal base and precious metal deposits makeup a range of familiar deposit styles including porphyry copper-gold, epithermal veins and stockworks, carbonate-replacement deposits, and polymetallic volcanic rock-hosted (VHMS) deposits. They occur along convergent plate margins and are invariably associated directly with active faults and volcanism. They are complex in form, variable in their characteristics at all scales, and highly localized in the earth’s crust. More than a century of detailed research has provided an extensive base of observational data characterizing these deposits, from their regional setting to the fluid and isotope chemistry of mineral deposition. This has led to a broad understanding of the large-scale hydrothermal systems within which they form. Low salinity vapor, released by magma crystallization and dispersed into vigorously convecting groundwater systems, is recognized as a principal source of metals and the gases that control redox conditions within systems. The temperature and pressure of the ambient fluid anywhere within these systems is close to its vapor-liquid phase boundary, and mineral deposition is a consequence of short timescale perturbations generated by localized release of crustal stress. However, a review of occurrence data raises questions about ore formation that are not addressed by traditional genetic models. For example, what are the origins of banding in epithermal veins, and what controls the frequency of oscillatory lamination? What controls where the phenomenon of mineralization occurs, and why are some porphyry deposits, for example, so much larger than others? The distinctive, self-organized characteristics of epizonal deposits are shown to be the result of repetitive coupling of fracture dilation consequent on brittle failure, phase separation (“boiling”), and heat transfer between fluid and host rock. Process coupling substantially increases solute concentrations and triggers fast, far-from-equilibrium depositional processes. Since these coupled processes lead to localized transient changes in fluid characteristics, paragenetic, isotope, and fluid inclusion data relate to conditions at the site of deposition and only indirectly to the characteristics of the larger-scale hydrothermal system and its longer-term behavior. The metal concentrations (i.e. grade) of deposits and their internal variation is directly related to the geometry of the fracture array at the deposit scale, whereas finer-scale oscillatory fabrics in ores may be a result of molecular scale processes. Giant deposits are relatively rare and develop where efficient metal deposition is spatially focused by repetitive brittle failure in active fault arrays. Some brief case histories are provided for epithermal, replacement, and porphyry mineralization. These highlight how rock competency contrasts and feedback between processes, rather than any single component of a hydrothermal system, govern the size of individual deposits. In turn, the recognition of the probabilistic nature of mineralization provides a firmer foundation through which exploration investment and risk management decisions can be made.

Annual Review of Earth and Planetary Sciences↗
USGS2009

Texture-based automated lithological classification using aeromagnetic anomaly images

This report consists of a thesis submitted to the faculty of the Department of Electrical and Computer Engineering, in partial fulfillment of the requirements for the degree of Master of Science, Graduate College, The University of Arizona, 2004 Aeromagnetic anomaly images are geophysical prospecting tools frequently used in the exploration of metalliferous minerals and hydrocarbons. The amplitude and texture content of these images provide a wealth of information to geophysicists who attempt to delineate the nature of the Earth's upper crust. These images prove to be extremely useful in remote areas and locations where the minerals of interest are concealed by basin fill. Typically, geophysicists compile a suite of aeromagnetic anomaly images, derived from amplitude and texture measurement operations, in order to obtain a qualitative interpretation of the lithological (rock) structure. Texture measures have proven to be especially capable of capturing the magnetic anomaly signature of unique lithological units. We performed a quantitative study to explore the possibility of using texture measures as input to a machine vision system in order to achieve automated classification of lithological units. This work demonstrated a significant improvement in classification accuracy over random guessing based on a priori probabilities. Additionally, a quantitative comparison between the performances of five classes of texture measures in their ability to discriminate lithological units was achieved.

Arizona↗
USGS2021

Implementation plan for the southern Pacific Border and Sierra-Cascade Mountains provinces

Introduction The National Cooperative Geologic Mapping Program (NCGMP) is publishing a strategic plan titled Renewing the National Cooperative Geologic Mapping Program as the Nation’s Authoritative Source for Modern Geologic Knowledge (Brock and others, in press). The plan provides a vision, mission, and goals for the program during the years 2020–2030, which are: Vision .—Create an integrated, three-dimensional, digital geologic map of the United States. Mission .—Characterize, interpret, and disseminate a national geologic framework model of the Earth through geologic mapping. Goal .—Focus on geologic mapping as a core function of the U.S. Geological Survey (USGS) within the long-term vision of adequately mapping the Nation’s geologic framework in three dimensions. In order to achieve the goals outlined in the strategic plan, the NCGMP has developed an implementation plan. This plan will guide the annual review of projects carried out by USGS staff (FEDMAP) described in the plan and the development of the annual FEDMAP prospectus that will ensure the effective application of the NCGMP strategy. This publication describes the implementation plan of the NCGMP strategy for the southern Pacific Border and Sierra-Cascade Mountains provinces, as defined by Fenneman (1917, 1928, and 1946). This implementation plan focuses on the geology of California and a sliver of Nevada surrounding Lake Tahoe. The southern Pacific Border and Sierra-Cascade Mountains provinces encompass the varied landscapes of the high Sierra Nevada, the Central Valley, and Coast Ranges in northern and central California and the Peninsular Ranges, Continental Borderland, Los Angeles Basin-San Gabriel-San Bernardino valleys, western and central Transverse Ranges, and northernmost Salton Trough in southern California. Societal demands create a need for earth-science data in each of these landscapes. The broader San Francisco Bay area, Central Valley, Los Angeles-San Gabriel-San Bernardino lowlands, and the coastal lowlands that border the Peninsular Ranges are densely populated (about 30 million people) areas at high risk of natural hazards. The mountains of the Sierra Nevada, Peninsular Ranges, and Transverse Ranges, and the coast all provide numerous recreational opportunities that attract visitors from around the world, whereas previously these ranges attracted people to mine their resources. The agricultural capacity of the Central Valley is a critical resource for the Nation that is increasingly water limited. The southern. Pacific Border and Sierra-Cascade Mountains provinces, at the edge of the North American continent, were profoundly influenced by subduction zone tectonics during the Mesozoic and early Cenozoic (ongoing in northernmost California) and subsequently by the inception, development, and present activity of the San Andreas transform margin system. Although the geology of this region is the poster child of fundamental conceptual models of subduction zone complexes, forearc basins, ophiolite obductions, magmatic arcs, and suspect terranes, as well as hosting one of Earth’s most notorious continental transform faults—the San Andreas Fault—important questions that have important societal consequences remain to be answered. Most of California’s population reside in these provinces and live within 30 miles of an active fault (according to www.earthquakeauthority.com ) yet new faults continue to be discovered, highlighting the importance of deformation off the main San Andreas Fault. Bedrock, surficial, and three-dimensional (3D) geologic maps depicting stratigraphic structure and depth to crystalline basement rocks provide critical context and information for understanding fault rupture, distributed deformation, fault connectivity, and history in addition to providing crucial data that enable forecasting of shaking amplitude and length from hypothetical earthquake scenarios. The tectonic evolution of California produced not only stunning mountains, with associated hazards from landslides and active volcanoes, but also fertile valleys that make California the top agricultural producer in the country in terms of cash receipts (according to www.ers.usda.gov/faqs ). These valleys lie atop large basins that not only store groundwater but, in many cases, host oil and gas fields, contributing to the fourth highest hydrocarbon production by State in the country in 2016 (according to https://www.aei.org/carpe-diem/animated-chart-of-us-oil-production-by-state-1981-2017 ). Water is a key resource increasingly stressed by growing agricultural, industrial, and residential needs. Warmer and drier conditions have led to an increased reliance on extracting groundwater resources, whose availability and quality are dictated at the first order by the 3D spatial distribution of bedrock and Quaternary surficial deposits. Thus, assessment of this critical resource is inextricably tied to knowledge of the surficial and subsurface geologic structure and material types.

California, Nevada↗
USGS2004

Issues of scale, location and geologic terrain related to Salt Lake City and Baltimore-Washington metropolitan areas

Planning and development of expanding metropolitan regions require consideration of earth science issues related to issues involving scale, space (location), geologic terrain and physiographic units, and information transfer. This paper explores these matters with examples from the Salt Lake City, Utah area and Mid-Atlantic region of Baltimore-Washington that include water supply and natural hazards (earthquakes, landslides, and sinkholes.) Information transfer methods using physiographic units at national, regional, local and site scales serve to communicate relevant geologic constraint and natural resource information.

Conference Paper↗
USGS2018

Opportunities to enhance seismic demand parameters for future editions of the AS1170.4

Geoscience Australia has recently released its 2018 National Seismic Hazard Assessment (NSHA18). Results from the NSHA18 indicate significantly lower seismic hazard across almost all Australian localities at the 1/500 annual exceedance probability level relative to the factors adopted for the current Australian Standard AS1170.4–2007 (R2018). These new hazard estimates, coupled with larger probability factors (kp) for long return periods, have challenged notions of seismic hazard in Australia in terms of the recurrence of damaging ground motions. As a consequence, the new hazard estimates have raised questions over the appropriateness of the prescribed National Construction Code probability level as used in the AS1170.4 to determine appropriate seismic demands for the design of ordinary-use structures. Therefore, it is suggested that the ground-motion exceedance probability used in the current AS1170.4 be reviewed in light of the recent hazard assessment and the expected performance of modern buildings for rarer ground motions. Whilst adjusting the AS1170.4 exceedance probability level would be a major departure from previous earthquake loading standards, it would bring it into line with other international building codes in similar tectonic environments. Additionally, it would offer opportunities to further modernise how seismic demands are considered in Australian building design. In particular, the authors highlight the following additional opportunities: 1) the use of uniform hazard spectra to replace and simplify the spectral shape factors, which do not deliver uniform hazard across all natural periods; 2) updated site amplification factors to ensure continuity with modern ground-motion models, and; 3) the potential to define design ground motions in terms of uniform collapse risk rather than uniform hazard. Estimation of seismic hazard at any location is an uncertain science. However, as our knowledge improves, our estimates of the hazard will converge more closely to the actual – but unknowable – (time independent) hazard. It is therefore prudent to regularly update the estimates of the seismic demands in our building codes using the best available evidence-based methods and models.

Conference Paper↗
USGS2010

EAARL Coastal Topography-Chandeleur Islands, Louisiana, 2010: Bare Earth

These remotely sensed, geographically referenced elevation measurements of lidar-derived bare-earth (BE) and submerged topography datasets were produced collaboratively by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, FL, and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of a portion of the Chandeleur Islands, acquired March 3, 2010. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral color-infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Decision Support for Coastal Science and Management website.

Data Series↗
USGS2011

USGS science in the gulf oil spill: Novel science applications in a crisis

Marcia McNutt reflects on the role of the US Geological Survey (USGS) team following the Deepwater Horizon oil spill. Secretary Salazar asked Marcia McNutt to lead the Flow Rate Technical Group, a team charged by National Incident Commander Adm. Thad Allen with improving estimates of the oil discharge rate from the Macondo well as quickly as possible. Given the unprecedented nature of this spill, the team moved rapidly to deploy every reasonable approach. The team estimated the plume velocity from deep-sea video and from Woods Hole Oceanographic Institution's acoustic Doppler current profiler. The team calculated the total volume of the spill using aircraft remote sensing. After the unsuccessful top kill attempt in late May, during which large volumes of mud were pumped down the flowing well, an important part of understanding the failure of the procedure was answering the question.

Sea Technology↗
USGS2012

The IUGS/IAGC Task Group on Global Geochemical Baselines

The Task Group on Global Geochemical Baselines, operating under the auspices of both the International Union of Geological Sciences (IUGS) and the International Association of Geochemistry (IAGC), has the long-term goal of establishing a global geochemical database to document the concentration and distribution of chemical elements in the Earth’s surface or near-surface environment. The database and accompanying element distribution maps represent a geochemical baseline against which future human-induced or natural changes to the chemistry of the land surface may be recognized and quantified. In order to accomplish this long-term goal, the activities of the Task Group include: (1) developing partnerships with countries conducting broad-scale geochemical mapping studies; (2) providing consultation and training in the form of workshops and short courses; (3) organizing periodic international symposia to foster communication among the geochemical mapping community; (4) developing criteria for certifying those projects whose data are acceptable in a global geochemical database; (5) acting as a repository for data collected by those projects meeting the criteria for standardization; (6) preparing complete metadata for the certified projects; and (7) preparing, ultimately, a global geochemical database. This paper summarizes the history and accomplishments of the Task Group since its first predecessor project was established in 1988.

Earth Science Frontiers↗
USGS2016

The value of earth observations: methods and findings on the value of Landsat imagery

Data from Earth observation systems are used extensively in managing and monitoring natural resources, natural hazards, and the impacts of climate change, but the value of such data can be difficult to estimate, particularly when it is available at no cost. Assessing the socioeconomic and scientific value of these data provides a better understanding of the existing and emerging research, science, and applications related to this information and contributes to the decision making process regarding current and future Earth observation systems. Recent USGS research on Landsat data has advanced the literature in this area by using a variety of methods to estimate value. The results of a 2012 survey of Landsat users, a 2013 requirements assessment, and 2013 case studies of applications of Landsat imagery are discussed.

Book chapter↗