Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Geophysical Investigations Map”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53Linked to original sources
USGS2022

Geology and hydrogeology of the Yucaipa groundwater subbasin, San Bernardino and Riverside Counties, California

The Yucaipa groundwater subbasin (referred to in this report as the Yucaipa subbasin) is located about 75 miles (mi) east of of Los Angeles and about 12 mi southeast of the City of San Bernardino. In the Yucaipa subbasin, as in much of southern California, limited annual rainfall and large water demands can strain existing water supplies; therefore, understanding local surface water and groundwater conditions is essential for managing these resources. To better understand the hydrogeology and water resources in the Yucaipa subbasin, especially groundwater, the San Bernardino Valley Municipal Water District and the U.S. Geological Survey initiated a cooperative study to evaluate the hydrogeologic system of the Yucaipa subbasin and the encompassing Yucaipa Valley watershed. Previous studies of the area provided information on general geologic and hydrologic conditions, but this study provides the first comprehensive definition of the hydrogeology of the subsurface throughout the entire subbasin. The Yucaipa subbasin is located between the northwest trending San Andreas fault zone and San Jacinto fault. Several northeast-trending dip-slip faults dissect the Yucaipa subbasin, providing the mechanism for structural relief within the sediment-filled subbasin and between the subbasin and surrounding mountains and highlands. Several of these dip-slip faults have been previously identified as potential barriers to groundwater flow. This report provides a synthesis of previous studies and a discussion of the geologic interpretations that were used as the foundation for hydrogeologic classification of the Yucaipa subbasin. Notably, this report (1) adopts the recently named and classified sedimentary deposits of Live Oak Canyon geologic formation and extends the mapped distribution of the formation into the Yucaipa subbasin, and (2) adopts the interpretation that activity along the Banning fault predates the deposition of most basin-fill sedimentary materials in the Yucaipa subbasin. Four hydrogeologic units were classified in the Yucaipa subbasin: (1) crystalline basement, (2) consolidated sedimentary materials, (3) unconsolidated sediment, and (4) surficial materials. The crystalline basement unit forms the bottom boundary of the aquifer system, and the three other units comprise the basin-fill aquifer system. The four hydrogeologic units vary in extent, thickness, and structural relief across the subbasin, with the unconsolidated sediment unit serving as the primary aquifer unit. A three-dimensional hydrogeologic framework model was developed for the Yucaipa subbasin and surrounding area to characterize the thickness, extent, and hydrogeologic variability of the aquifer system. Geologic maps, borehole geophysical logs, drillers’ lithology logs, and depth-to-basement gravity data were used to map and interpolate the subsurface extent and structure of the hydrogeologic units within the subbasin. Faults and structures of geologic and (or) hydrogeologic importance were included in the model for future evaluation of their potential effects on groundwater flow. The resulting hydrogeologic framework is consistent with existing geologic concepts and the tectonic and structural history of the Yucaipa subbasin and surrounding area. The framework is also suitable for use in basin-scale hydrogeologic investigations.

California↗
USGS2020

Probabilistic categorical groundwater salinity mapping from airborne electromagnetic data adjacent to California’s Lost Hills and Belridge oil fields

Growing water stress has led to emerging interest in protecting fresh and brackish groundwater as a potential supplement to water supplies and raised questions about factors that could affect the future quality of fresh and brackish aquifers. Limited well infrastructure, particularly in regions where elevated salinity has led to limited historical groundwater development, hinders traditional mapping of salinity distributions through groundwater sampling. This paper presents a quantitative salinity mapping approach of the upper 300 m using high‐resolution, regionally comprehensive resistivity models derived from Bayesian inversion of an airborne electromagnetic survey adjacent to the Lost Hills and Belridge oil fields in the southwestern San Joaquin Valley of California. Using local water quality observations as an interpretational foundation, a probabilistic approach yields maps of fresh, saline, and brackish groundwater while quantifying joint uncertainty inherited from the geophysical data and interpretational relations. Saline and fresh regions are mapped with relatively high confidence in many locations, while areas of lower confidence, particularly at depth, can be mapped as their most probable salinity category while reflecting the relative uncertainty in the interpretation. These maps identify a stratified salinity structure, where saline water commonly occurs in the surficial aquifer overlying fresher groundwater in the Tulare aquifer, separated by regional confining clay layers. Downgradient of unlined surface water diversions, recharge of imported surface water results in relatively fresh groundwater throughout the depth of investigation.

California↗
USGS1986

Surficial geology, structure, and thickness of selected geohydrologic units in the Columbia Plateau, Washington

A 2-1/2 year study of the Columbia Plateau in Washington was begun in March 1982 to define spatial and temporal variations in dissolved sodium in the Columbia River Basalt Group aquifers and to relate these variations to the groundwater system and its geologic framework. This report describes the geologic framework , including the vertical and areal extent of the major basalt units, interbeds, and overlying materials. Thickness and structure of the Grande Ronde, Wanapum, and Saddle Mountains Basalts, thickness of the interbeds between the Grande Ronde and Wanapum, and Wanapum and Saddle Mountains Basalts, and thickness of the overburden were mapped at a scale of 1:500,000. Information was compiled from 2,500 well records using chemical analyses of core or drill chips, geophysical logs, and driller 's logs, in decreasing order of reliability. Surficial geology and surficial expression of structural features were simplified from published maps to provide maps with this information at the 1:500,000 scale. This report is intended to serve as a base for evaluating the distribution of dissolved sodium in basalt aquifers and as a base for future water resource studies. (USGS)

Water-Resources Investigations Report↗
USGS2019

Monitoring brine contamination using time-lapse airborne electromagnetic surveys, East Poplar Oil Field, Montana

Integrated geophysical and water-quality studies have been used to delineate areas of saline groundwater in shallow unconfined aquifers underlying the East Poplar oil field in northeastern Montana. In 2004, a RESOLVE survey was conducted over the oil field to identify high conductivity areas potentially associated with brine contamination and to map the shale unit comprising the base of aquifer. In 2014, a SkyTEM 301 survey was conducted over the same flight paths to examine possible changes in groundwater conductivity and to complete the base-of-aquifer mapping where the depth of investigation from the 2004 survey was inadequate. We present a preliminary comparison between the 2004 and 2014 surveys.

Montana↗
USGS2015

Hydrogeologic framework, hydrology, and refined conceptual model of groundwater flow for Coastal Plain aquifers at the Standard Chlorine of Delaware, Inc. Superfund Site, New Castle County, Delaware, 2005-12

From 1966 to 2002, activities at the Standard Chlorine of Delaware chemical facility in New Castle County, Delaware resulted in the contamination of groundwater, soils, and wetland sediment. In 2005, the U.S. Geological Survey (USGS), in partnership with the U.S. Environmental Protection Agency, Region 3, and the Delaware Department of Natural Resources and Environmental Control began a multi-year investigation of the hydrogeologic framework and hydrology of the confined aquifer system. The goals of the ongoing study at the site (the Potomac Aquifer Study) are to determine the hydraulic connection between the Columbia and Potomac aquifers, determine the direction of groundwater flow in the Potomac aquifer, and identify factors affecting the fate of contaminated groundwater. This report describes progress made towards these goals based on available data collected through September 2012. The regional hydrogeologic framework indicates that the site is underlain by Coastal Plain sediments of the Columbia, Merchantville, and Potomac Formations. Two primary aquifers underlying the site, the Columbia and the upper Potomac, are separated by the Merchantville Formation confining unit. Local groundwater flow in the surficial (Columbia) aquifer is controlled by topography and generally flows northward and discharges to nearby surface water. Regional flow within the Potomac aquifer is towards the southeast, and is strongly influenced by major water withdrawals locally. Previous investigations at the site indicated that contaminants, primarily benzene and chlorinated benzene compounds, were present in the Columbia aquifer in most locations; however, there were only limited detections in the upper Potomac aquifer as of 2004. From 2005 through 2012, the USGS designed a monitoring network, assisted with exploratory drilling, collected data at monitoring wells, conducted geophysical surveys, evaluated water-level responses in wells during pumping of a production well, and evaluated major aquifer withdrawals. Data collected through these efforts were used to refine the local conceptual flow system. The refined conceptual flow system for the site includes: (a) identification of gaps in confining units in the study area, (b) identification and correlation of multiple water-bearing sand intervals within the upper Potomac Formation, (c) connections between groundwater and surface water, (d) connections between shallow and deeper groundwater, (e) new water-level (or potentiometric surface) maps and inferred flow directions, and (f) identification of major local pumping well influences. The implications of the revised conceptual flow system on the occurrence and movement of site contaminants are that the resulting detection of contaminants in the upper Potomac aquifer at specific well locations can be attributed primarily to either advective lateral transport, direct vertical contaminant transport, or a combination of vertical and lateral movement resulting from changes in water withdrawal rates over time.

Delaware↗
USGS2023

Active volcanism on the Arabian Shield—Geology, volcanology, and geophysics of northern Harrat Rahat and vicinity, Kingdom of Saudi Arabia

Active volcanic systems pose serious hazards to people and property including inundation and incineration by lava, blanketing by tephra (volcanic ash), exposure to noxious volcanic gases, and damage from shallow earthquakes triggered by ascending molten material (magma). To improve understanding of volcanism and associated seismicity on the western Arabia Plate, the Saudi Geological Survey and the U.S. Geological Survey conducted a multi-year investigation of the northern Harrat Rahat volcanic field adjacent to the city of Al Madīnah al Munawwarah, Kingdom of Saudi Arabia. Project components included creation of a high-resolution digital topographic base; interpretation of eruptive history supported by detailed geologic mapping, paleomagnetism, and abundant high-precision geochronology of volcanic deposits; assessments of eruptive styles and volcanic hazards by physical volcanology; investigation of the origins of magmas in the mantle and of their differentiation in the crust revealed by chemical and isotopic petrology; gravity and magnetotelluric surveys to reveal crustal structures and to search for magma reservoirs; and regional and local seismic tomography and analyses of seismic hazards. Project results are presented in this Professional Paper as chapters written for technical scientific audiences.

Professional Paper↗
USGS1967

Areal geology of the western Mojave Desert, California

This report and map represent part of a geologic investigation by the U.S. Geological Survey of the known and potential deposits of borate minerals in the southern California desert regions. The primary purpose of this report and the geologic map (pl. 1) is to provide a geologic background for the exploration for possible concealed borate deposits in the western Mojave Desert, based upon (1) the geology of the known deposits of these minerals within the region, (2) the areal geology of the region, and (3) the subsurface geology as determined insofar as possible from logs of exploratory test holes, mine workings, and geophysical data. Available logs of test holes so used, including those drilled for petroleum and some for water, and of borate mine shafts are summarized in tabulated form (tables 2-4); the gravity geophysical data are published separately (Mabey, 1960). The resulting geologic data are of use for many secondary purposes, such as exploration for other commodities, including petroleum and gas, and in evaluation of ground-water conditions. The base for the geologic map was prepared by joining parts of the Bakersfield, Trona, Los Angeles, and San Bernardino quadrangles, as published by the U.S. Geological Survey at a scale of 1:250,000, and then enlarging the mosaicked map to a scale of 1:125,000. Although lacking in detail and accuracy, the base is the best that is available. Numerous maps at a scale of an inch to a mile or larger show the geology of most of the complex areas in greater detail.

California↗
USGS2004

Hydrogeologic characterization of the Modesto Area, San Joaquin Valley, California

Hydrogeologic characterization was done to develop an understanding of the hydrogeologic setting near Modesto by maximizing the use of existing data and building on previous work in the region. A substantial amount of new lithologic and hydrologic data are available that allow a more complete and updated characterization of the aquifer system. In this report, geologic units are described, a database of well characteristics and lithology is developed and used to update the regional stratigraphy, a water budget is estimated for water year 2000, a three-dimensional spatial correlation map of aquifer texture is created, and recommendations for future data collection are summarized. The general physiography of the study area is reflected in the soils. The oldest soils, which have low permeability, exist in terrace deposits, in the interfan areas between the Stanislaus, Tuolumne, and Merced Rivers, at the distal end of the fans, and along the San Joaquin River floodplain. The youngest soils have high permeability and generally have been forming on the recently deposited alluvium along the major stream channels. Geologic materials exposed or penetrated by wells in the Modesto area range from pre-Cretaceous rocks to recent alluvium; however, water-bearing materials are mostly Late Tertiary and Quaternary in age. A database containing information from more than 3,500 drillers'logs was constructed to organize information on well characteristics and subsurface lithology in the study area. The database was used in conjunction with a limited number of geophysical logs and county soil maps to define the stratigraphic framework of the study area. Sequences of red paleosols were identified in the database and used as stratigraphic boundaries. Associated with these paleosols are very coarse grained incised valley-fill deposits. Some geophysical well logs and other sparse well information suggest the presence of one of these incised valley-fill deposits along and adjacent to the Tuolumne River east of Modesto, a feature that may have important implications for ground-water flow and transport in the region. Although extensive work has been done by earlier investigators to define the structure of the Modesto area aquifer system, this report has resulted in some modification to the lateral extent of the Corcoran Clay and the regional dip of the Mehrten Formation. Well logs in the database indicating the presence of the Corcoran Clay were used to revise the eastern extent of the Corcoran Clay, which lies approximately parallel to the axis of valley. The Mehrten Formation is distinguished in the well-log database by its characteristic black sands consisting of predominantly andesitic fragments. Black sands in wells listed in the database indicate that the formation may lie as shallow as 120 meters (400 feet) below land surface under Modesto, approximately 90 meters (300 feet) shallower than previously thought. The alluvial aquifer system in the Modesto area comprises an unconfined to semiconfined aquifer above and east of the Corcoran Clay confining unit and a confined aquifer beneath the Corcoran Clay. The unconfined aquifer is composed of alluvial sediments of the Modesto, Riverbank, and upper Turlock Lake formations. The unconfined aquifer east of the Corcoran Clay becomes semiconfined with depth due to the numerous discontinuous clay lenses and extensive paleosols throughout the aquifer thickness. The confined aquifer is composed primarily of alluvial sediments of the Turlock Lake and upper Mehrten Formations, extending from beneath the Corcoran Clay to the base of fresh water. Ground water in the unconfined to semiconfined aquifer flows to the west and southwest. The primary source of present-day recharge is percolating excess irrigation water. The primary ground-water discharge is extensive ground-water pumping in the unconfined to semiconfined aquifer, imposing a significant component of vertical flow in the system. A water budget was calculated for water year 2000 using a land-use approach. During water year 2000, the total water supply in the Modesto area was more than 2.5 billion m3 (cubic meter) (2 million acre-ft [acre-foot]). Surface-water deliveries accounted for 60 percent of the total water supply, whereas ground-water pumpage accounted for 40 percent. Ninety-four percent of the water supply was used to meet irrigation demand and approximately 6 percent was used to meet urban demand. The total recharge in the model area was estimated at 1.4 billion m3 (1,100,000 acre-ft). The largest component of recharge is from excess irrigation water (58 percent); precipitation in excess of crop requirements accounted for 41 percent of the recharge. Geostatistical methods were used to develop a spatial correlation model of the percentage of coarse-grained texture in the Modesto area. The mean percentage coarse-grained texture calculated for each depth increment indicates a regional trend of decreasing coarse-grained texture with increasing depth, which is consistent with increasingly consolidated sediments with depth in the study area. The three-dimensional kriged estimates of percentage coarse-grained texture show significant heterogeneity in the texture of the sedimentary deposits. Assuming the hydraulic conductivity is correlated to the texture, the kriged result implies significant heterogeneity in the hydrogeologic framework.

California↗
USGS1992

Geohydrologic systems in Kansas: Physical framework of the upper aquifer unit in the western interior plains aquifer system

The purpose of this Hydrologic Investigations Atlas is to provide a description of the principal geohydrologic systems in Upper Cambrian through Lower Cretaceous rocks in Kansas. This investigation was made as part of the Central Midwest Regional Aquifer-System Analysis (CMRASA). The CMRASA is one of several major investigations by the U.S. Geological Survey of regional aquifer systems in the United States. These regional investigations are designed to increase knowledge of the flow regime and hydrologic properties of major aquifer systems and to provide quantitative information for the assessment, development, and management water supplies. The CMRASA study area includes all or parts of 10 Central Midwestern States (Jorgensen and Signor, 1981), as shown on the envelope cover. This Hydrologic Investigations Atlas, which consists of a series of nine chapters, presents a description of the physical framework and the geohydrology of principal aquifers and confining systems in Kansas. Chapter D presents maps that show the areal extent, altitude and configuration of the top, and thickness of Mississippian rocks that compose the upper aquifer unit of the Western Interior Plains aquifer system in Kansas, The chapter is limited to the presentation of the physical framework of the upper aquifer unit. The interpretation of the physical framework of the upper aquifer unit is based on selected geophysical and lithologic logs and published maps of stratigraphically equivalent units. Maps indicating the thickness and the altitude and configuration of the top of the upper aquifer unit in the Western Interior Plains aquifer system have been prepared as part of a series of interrelated maps that describe the stratigraphic interval from the Precambrian basement through Lower Cretaceous rocks. A concerted effort was made to ensure that maps of each geohydrologic unit are consistent with the maps of underlying and overlying units. Chapter A of this atlas series (Wolf and others, 1990) describes the relation of principal geohydrologic systems in Kansas and presents a more detailed discussion of the methods and data used to prepare and ensure consistency among the sets of maps.

Kansas↗
USGS2005

Geologic map of the Ikpikpuk River quadrangle, Alaska

This map is a product of the USGS Digital Geologic Maps of Northern Alaska project, which captures in digital format quadrangles across the entire width of northern Alaska. Sources include geologic maps previously published in hardcopy format and recent updates and revisions based on field mapping by the Alaska Department of Natural Resources, Division of Geological and Geophysical Surveys and Division of Oil and Gas, and the U.S. Geological Survey. Individual quadrangles are digitized at either 1:125,000 or 1:250,000 depending on the resolution of source maps. The project objective is to produce a set of digital geologic maps with uniform stratigraphic nomenclature and structural annotation, and publish those maps electronically. The paper version of this map is available for purchase from the USGS Store.

Alaska↗
USGS2006

Geologic map of the Lookout Ridge quadrangle, Alaska

This map is a product of the USGS Digital Geologic Maps of Northern Alaska project, which captures in digital format quadrangles across the entire width of northern Alaska. Sources include geologic maps previously published in hardcopy format and recent updates and revisions based on field mapping by the Alaska Department of Natural Resources, Division of Geological and Geophysical Surveys and Division of Oil and Gas, and the U.S. Geological Survey. Individual quadrangles are digitized at either 1:125,000 or 1:250,000 depending on the resolution of source maps. The project objective is to produce a set of digital geologic maps with uniform stratigraphic nomenclature and structural annotation, and publish those maps electronically. The paper version of this map is available for purchase from the USGS Store.

Alaska↗
USGS2008

Geologic map of the Point Lay quadrangle, Alaska

This map is a product of the USGS Digital Geologic Maps of Northern Alaska project, which captures in digital format quadrangles across the entire width of northern Alaska. Sources include geologic maps previously published in hardcopy format and recent updates and revisions based on field mapping by the Alaska Department of Natural Resources, Division of Geological and Geophysical Surveys and Division of Oil and Gas, and the U.S. Geological Survey. Individual quadrangles are digitized at either 1:125,000 or 1:250,000 depending on the resolution of source maps. The project objective is to produce a set of digital geologic maps with uniform stratigraphic nomenclature and structural annotation, and publish those maps electronically. The paper version of this map is available for purchase from the USGS Store.

Alaska↗
USGS2019

Three-dimensional geologic map of the southern Carson Sink, Nevada, including the Fallon FORGE area

The three-dimensional (3–D) geologic map characterizes the subsurface in the southern Carson Sink region. We created the 3–D map by integrating the results from seismic-reflection, potential-field-geophysical, and lithologic well-logging inves­tigations completed in and around the Fallon FORGE site as part of the U.S. Department of Energy Frontier Observatory for Research in Geothermal Energy (FORGE) initiative from 2015–2018. The FORGE initiative was part of an effort to develop the technologies, techniques, and knowledge needed to make enhanced geothermal systems a commercially viable electricity-generation option for the United States. Geo­logic units and structures mapped during the Fallon FORGE study, which particularly focused on the Mesozoic basement, were extrapolated to create the 3–D map of the southern Carson Sink area. The 3–D map area is 10 km wide along the east-west and north-south axes and extends 2.5 km below sea level, ~3.7 km below the land surface. Views of the map include horizontal and vertical sections and oblique perspective views from several angles. We describe the geologic units and structures and dis­cuss the methods used to integrate the geologic and geophysical information in a 3–D geologic interpretation. We provide digital data for elements of the map, such as individual 3–D fault and stratigraphic surfaces and surface-fault traces. Input data are available from various data repositories through cited web links. A brief movie displaying the 3–D map is available at https://doi.org/10.3133/sim3437 .

Nevada↗
USGS2023

Three-dimensional geologic map the southeastern Gabbs Valley geothermal area, Nevada

This three-dimensional (3D) geologic map displays the subsurface geology in the upper ~4 kilometers of the Earth’s crust in the southeastern Gabbs Valley geothermal area of west-central Nevada. The 3D map was constructed by integrating the results from detailed geologic mapping, 3D gravity inversion modeling, and potential-field-geophysical studies. This effort was undertaken as part of the Nevada Play Fairway Project, a regional effort to characterize new geothermal resources in the United States. Local data collection and analysis in southeastern Gabbs Valley, Nevada, including the construction of this 3D map, led to the drilling of six temperature gradient wells and identification of previously unknown hydrothermal fluids at 150 meters depth. The measured temperatures, which are as high as 124.9 degrees Celsius, indicate that the southeastern Gabbs Valley hydrothermal system has temperatures that are comparable to geothermal fields that have been developed for electricity generation in the region. We describe the geologic units and structures displayed by the map and discuss the methods used to integrate the geologic and geophysical information into the 3D geologic interpretation. The accompanying map provides horizontal and vertical section views and oblique perspective views from several angles. The digital data for elements of the map, the individual 3D fault surfaces, and stratigraphic surfaces are available from Siler (2022). The accompanying map sheet and video displaying the 3D map are available at https://doi.org/10.3133/sim3498 .

Nevada↗
USGS2010

Archive of digital Chirp sub-bottom profile data collected during USGS Cruise 07SCC01 offshore of the Chandeleur Islands, Louisiana, June 2007

In June of 2007, the U.S. Geological Survey (USGS) conducted a geophysical survey offshore of the Chandeleur Islands, Louisiana, in cooperation with the Louisiana Department of Natural Resources (LDNR) as part of the USGS Barrier Island Comprehensive Monitoring (BICM) project. This project is part of a broader study focused on Subsidence and Coastal Change (SCC). The purpose of the study was to investigate the shallow geologic framework and monitor the enviromental impacts of Hurricane Katrina (Louisiana landfall was on August 29, 2005) on the Gulf Coast's barrier island chains. This report serves as an archive of unprocessed digital 512i and 424 Chirp sub-bottom profile data, trackline maps, navigation files, Geographic Information System (GIS) files, Field Activity Collection System (FACS) logs, observer's logbook, and formal Federal Geographic Data Committee (FGDC) metadata. Gained (a relative increase in signal amplitude) digital images of the seismic profiles are also provided. Refer to the Acronyms page for expansion of acronyms and abbreviations used in this report. The USGS St. Petersburg Coastal and Marine Science Center (SPCMSC) assigns a unique identifier to each cruise or field activity. For example, 07SCC01 tells us the data were collected in 2007 for the Subsidence and Coastal Change (SCC) study and the data were collected during the first field activity for that study in that calendar year. Refer to http://walrus.wr.usgs.gov/infobank/programs/html/definition/activity.html for a detailed description of the method used to assign the field activity identification (ID). All Chirp systems use a signal of continuously varying frequency; the Chirp systems used during this survey produce high resolution, shallow penetration profile images beneath the seafloor. The towfish is a sound source and receiver, which is typically towed 1 - 2 m below the sea surface. The acoustic energy is reflected at density boundaries (such as the seafloor or sediment layers beneath the seafloor), detected by a receiver, and recorded by a PC-based seismic acquisition system. This process is repeated at timed intervals (for example, 0.125 s) and recorded for specific intervals of time (for example, 50 ms). In this way, a two-dimensional vertical image of the shallow geologic structure beneath the ship track is produced. Figure 1 displays the acquisition geometry. Refer to table 1 for a summary of acquisition parameters. See the digital FACS equipment log (11-KB PDF) for details about the acquisition equipment used. Table 2 lists trackline statistics. Scanned images of the handwritten FACS logs and handwritten science logbook (449-KB PDF) are also provided. The archived trace data are in standard Society of Exploration Geophysicists (SEG) SEG-Y rev 1 format (Norris and Faichney, 2002); ASCII character encoding is used for the first 3,200 bytes of the card image header instead of the SEG-Y rev 0 (Barry and others, 1975) EBCDIC format. The SEG-Y files may be downloaded and processed with commercial or public domain software such as Seismic Unix (SU) (Cohen and Stockwell, 2010). See the How To Download SEG-Y Data page for download instructions. The web version of this archive does not contain the SEG-Y trace files. These files are very large and would require extremely long download times. To obtain the complete DVD archive, contact USGS Information at 1-888-ASK-USGS or infoservices@usgs.gov. The printable profiles provided here are GIF images that were processed and gained using SU software; refer to the Software page for links to example SU processing scripts and USGS software for viewing the SEG-Y files (Zihlman, 1992). The processed SEG-Y data were also exported to Chesapeake Technology, Inc. (CTI) SonarWeb software to produce an interactive version of the profile that allows the user to obtain a geographic location and depth from the profile for a given cursor position. This information is displayed in the status bar of the browser.

Louisiana↗
USGS1993

Geohydrologic systems in Kansas, geohydrology of the Great Plains aquifer system

Sedimentary rocks of Late Cambrian through Early Cretaceous age in Kansas are part of a regional flow system of hydraulically connected aquifers and confining units. Future demands for water require that these deeply buried rocks be studied to describe hydrologic properties and ground-water-flow conditions and to provide information that will serve as the basis for decisions concerning the protection and the management of the water resources contained therein, Toward this end, the U.S. Geological Survey, as a part of its Central Midwest Regional Aquifer-System Analysis (CMRASA), began a 5-year hydrologic investigation of this regional flow system in Arkansas, Colorado, Kansas, Missouri, Nebraska, New Mexico, Oklahoma, South Dakota, and Texas (Jorgensen and Signor, 1981). This chapter is one of nine contained in Hydrologic Investigations Atlas HA-722, which present a description of the physical framework (Chapters B-F) and the geohydrology (Chapters G-I} of principal aquifers and confining systems in Upper Cambrian through Lower Cretaceous rocks in Kansas; the stratigraphic relations of these geohydrologic systems are discussed in detail in Chapter A (Wolf and others, 1990). This chapter (G) describes the geohydrology of the Great Plains aquifer system; the physical framework of the Great Plains aquifer system is presented in Chapter B (Spinazola and others, 1992). The maps in this chapter are based on existing data from selected geophysical and lithologic logs, drill-stem tests, water-level measurements, water-quality analyses, and published maps of stratigraphically equivalent units. An index to the geohydrologic data compiled for the CMRASA in Kansas is presented in Spinazola and others (1987). For the most part, data used to construct the maps were collected over many years and do not reflect aquifer conditions for any specific time period.

Kansas↗
USGS2024

Hydrogeologic framework and extent of saltwater intrusion in Kings, Queens, and Nassau Counties, Long Island, New York

In 2016, the U.S. Geological Survey began a multiyear cooperative study with the New York State Department of Environmental Conservation to evaluate the sustainability of Long Island’s sole-source aquifer system through hydrogeologic mapping, compilation of groundwater chloride concentrations, and groundwater flow modeling. In the initial phase of the islandwide study, the hydrogeologic framework and extent of saltwater intrusion in aquifers in Kings, Queens, and Nassau Counties on western Long Island, N.Y., were investigated. The aquifer system underlying western Long Island has been under stress from pumping of public, irrigation (golf course), and industrial supply wells. Saltwater intrusion has occurred from surrounding embayments (East River, Long Island Sound, Jamaica Bay, and the Atlantic Ocean) due to pumping. Eighteen boreholes were drilled and cores taken during 2019–21 to collect hydrogeologic, geochemical, and geophysical data to delineate the complex subsurface hydrogeology and extent of saltwater intrusion within the study area. Evaluation of the new cores, reexamination of legacy core descriptions, and analysis of borehole geophysical logs was used to refine the previously published hydrogeologic framework of Pleistocene and Cretaceous unconsolidated sediments in the area, including delineation of a previously undefined hydrogeologic unit between the Magothy aquifer and the Raritan confining unit, herein named the “upper Raritan aquifer.” The upper Raritan aquifer was first recognized in southeastern Nassau County from an analysis of about 50 closely spaced boreholes with high-resolution core descriptions and gamma-ray (gamma) logs. Further analysis of borehole logs across the study area indicated that the upper Raritan aquifer was also present in Kings and Queens Counties. Nuclear magnetic resonance (NMR) logging was used for the first time on Long Island to provide estimates of the hydraulic properties of the major aquifer and confining units. Unlike other geophysical logs that record responses to the rock matrix and fluid properties and are strongly dependent on mineralogy, NMR logs record responses to the presence of hydrogen protons in the formation fluid to determine water fraction and pore-size distribution. NMR log analysis provided estimates of the clay-bound, capillary-bound, and mobile water fractions and hydraulic conductivity of aquifers and confining units penetrated by five wells in Nassau County. Pumpage for public-supply and industrial wells on Long Island began in the 1870s with small, localized suppliers of populated areas in Kings and Queens Counties. By 1904–16, pumpage for public water supply in Kings County averaged 21 million gallons per day, and averaged 37 million gallons per day in Queens County, mostly from the upper glacial aquifer. Saltwater intrusion was reported as early as the beginning of the 20th century and included the upper glacial-Jameco-Magothy and Lloyd-North Shore aquifer systems. By 1936, pumping in central Kings County created a major cone of depression in the water table extending to the south shore of much of Kings County and into southwestern Queens County. Saltwater intrusion has caused the shutdown of public-supply wells in Kings, Queens, and Nassau Counties. A large saltwater intrusion wedge in the Lloyd aquifer was indicated in southern Queens County in the early part of the 20th century, and the saltwater interface may have been onshore predevelopment. Most of Kings and Queens Counties are intruded with saltwater in both the upper glacial-Jameco-Magothy and Lloyd-North Shore aquifers systems. Saltwater increased during the 20th century and continues to increase to the present (2023) in the Lloyd-North Shore aquifer system in Great Neck and Manhasset Neck in northern Nassau County. A major wedge of saltwater intrusion in the upper glacial-Jameco-Magothy aquifer in southwestern Nassau County appears to be increasing.

New York↗
USGS2014

Digital surfaces and thicknesses of selected hydrogeologic units within the Ozark Plateaus aquifer system, northwestern Arkansas

Digital surfaces and thicknesses of nine hydrogeologic units of the Ozark Plateaus aquifer system from land surface to the top of the Gunter Sandstone in northwestern Arkansas were created using geophysical logs, drillers’ logs, geologist-interpreted formation tops, and previously published maps. The 6,040 square mile study area in the Ozark Plateaus Province includes Benton, Washington, Carroll, Madison, Boone, Newton, Marion, and Searcy Counties. The top of each hydrogeologic unit delineated on geophysical logs was based partly on previously published reports and maps and also from drillers’ logs. These logs were then used as a basis to contour digital surfaces showing the top and thickness of the Fayetteville Shale, the Boone Formation, the Chattanooga Shale, the Everton Formation, the Powell Dolomite, the Cotter Dolomite, the Roubidoux Formation, the Gasconade Dolomite, and the Gunter Sandstone.

Arkansas↗