Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Environmental Health”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53Linked to original sources

A novel picorna-like virus in a Wabash Pigtoe (Fusconaia flava) from the upper Mississippi River, USA

Unionid mussels are threatened by multiple environmental stressors and have experienced mass mortality events over the last several decades, but the role of infectious disease in unionid health and population declines remains poorly understood. Although several microbial agents have been found in unionids, to date only one virus has been documented—Lea plague virus ( Arenaviridae ) in propagated Triangle Shell mussels ( Hyriopsis cumingii ) in China. We used next-generation DNA sequencing to screen hemolymph of seven individuals of five unionid species from the Upper Mississippi River basin, USA for viruses. We identified the complete polyprotein gene of a novel picornalike virus in one individual of the Wabash Pigtoe ( Fusconaia flava ). The virus is a member of the Nora virus clade of picornalike viruses and is most closely related to viruses from arthropods in China. We did not detect viruses in another Wabash Pigtoe or in animals of the other four species. It is premature to make inferences about the role of this virus in the health of Wabash Pigtoes or other unionid species or the origin or transmission of this virus. Nevertheless, to our knowledge, our results represent the first report of a virus in wild North American unionids. Technologies based on next-generation DNA sequencing should prove useful for identifying new viruses and investigating their role in unionid health and disease.

Minnesota, Wisconsin↗

Intercomparison of same-day remote sensing data for measuring winter cover crop biophysical traits

Winter cover crops are planted during the fall to reduce nitrogen losses and soil erosion and improve soil health. Accurate estimations of winter cover crop performance and biophysical traits including biomass and fractional vegetative groundcover support accurate assessment of environmental benefits. We examined the comparability of measurements between ground-based and spaceborne sensors as well as between processing levels (e.g., surface vs. top-of-atmosphere reflectance) in estimating cover crop biophysical traits. This research examined the relationships between SPOT 5, Landsat 7, and WorldView-2 same-day paired satellite imagery and handheld multispectral proximal sensors on two days during the 2012–2013 winter cover crop season. We compared two processing levels from three satellites with spatially aggregated proximal data for red and green spectral bands as well as the normalized difference vegetation index (NDVI). We then compared NDVI estimated fractional green cover to in-situ photographs, and we derived cover crop biomass estimates from NDVI using existing calibration equations. We used slope and intercept contrasts to test whether estimates of biomass and fractional green cover differed statistically between sensors and processing levels. Compared to top-of-atmosphere imagery, surface reflectance imagery were more closely correlated with proximal sensors, with intercepts closer to zero, regression slopes nearer to the 1:1 line, and less variance between measured values. Additionally, surface reflectance NDVI derived from satellites showed strong agreement with passive handheld multispectral proximal sensor-sensor estimated fractional green cover and biomass (adj. R 2 = 0.96 and 0.95; RMSE = 4.76% and 259 kg ha−1, respectively). Although active handheld multispectral proximal sensor-sensor derived fractional green cover and biomass estimates showed high accuracies (R 2 = 0.96 and 0.96, respectively), they also demonstrated large intercept offsets (−25.5 and 4.51, respectively). Our results suggest that many passive multispectral remote sensing platforms may be used interchangeably to assess cover crop biophysical traits whereas SPOT 5 required an adjustment in NDVI intercept. Active sensors may require separate calibrations or intercept correction prior to combination with passive sensor data. Although surface reflectance products were highly correlated with proximal sensors, the standardized cloud mask failed to completely capture cloud shadows in Landsat 7, which dampened the signal of NIR and red bands in shadowed pixels.

Maryland↗

Microphotographs of cyanobacteria documenting the effects of various cell-lysis techniques

Cyanotoxins are a group of organic compounds biosynthesized intracellularly by many species of cyanobacteria found in surface water. The United States Environmental Protection Agency has listed cyanotoxins on the Safe Drinking Water Act's Contaminant Candidate List 3 for consideration for future regulation to protect public health. Cyanotoxins also pose a risk to humans and other organisms in a variety of other exposure scenarios. Accurate and precise analytical measurements of cyanotoxins are critical to the evaluation of concentrations in surface water to address the human health and ecosystem effects. A common approach to total cyanotoxin measurement involves cell membrane disruption to release the cyanotoxins to the dissolved phase followed by filtration to remove cellular debris. Several methods have been used historically, however no standard protocols exist to ensure this process is consistent between laboratories before the dissolved phase is measured by an analytical technique for cyanotoxin identification and quantitation. No systematic evaluation has been conducted comparing the multiple laboratory sample processing techniques for physical disruption of cell membrane or cyanotoxins recovery. Surface water samples collected from lakes, reservoirs, and rivers containing mixed assemblages of organisms dominated by cyanobacteria, as well as laboratory cultures of species-specific cyanobacteria, were used as part of this study evaluating multiple laboratory cell-lysis techniques in partnership with the U.S. Environmental Protection Agency. Evaluated extraction techniques included boiling, autoclaving, sonication, chemical treatment, and freeze-thaw. Both treated and untreated samples were evaluated for cell membrane integrity microscopically via light, epifluorescence, and epifluorescence in the presence of a DNA stain. The DNA stain, which does not permeate live cells with intact membrane structures, was used as an indicator for cyanotoxin release into the dissolved phase. Of the five techniques, sonication (at 70 percent) was most effective at complete cell destruction while QuikLyse (Trademarked) was least effective. Autoclaving, boiling, and sequential freeze-thaw were moderately effective in physical destruction of colonies and filaments.

Open-File Report↗

Effects of wastewater effluent discharge and treatment facility upgrades on environmental and biological conditions of Indian Creek, Johnson County, Kansas, June 2004 through June 2013

Indian Creek is one of the most urban drainage basins in Johnson County, Kansas, and environmental and biological conditions of the creek are affected by contaminants from point and other urban sources. The Johnson County Douglas L. Smith Middle Basin (hereafter referred to as the “Middle Basin”) and Tomahawk Creek Wastewater Treatment Facilities (WWTFs) discharge to Indian Creek. In summer 2010, upgrades were completed to increase capacity and include biological nutrient removal at the Middle Basin facility. There have been no recent infrastructure changes at the Tomahawk Creek facility; however, during 2009, chemically enhanced primary treatment was added to the treatment process for better process settling before disinfection and discharge with the added effect of enhanced phosphorus removal. The U.S. Geological Survey, in cooperation with Johnson County Wastewater, assessed the effects of wastewater effluent on environmental and biological conditions of Indian Creek by comparing two upstream sites to four sites located downstream from the WWTFs using data collected during June 2004 through June 2013. Environmental conditions were evaluated using previously and newly collected discrete and continuous data and were compared with an assessment of biological community composition and ecosystem function along the upstream-downstream gradient. This study improves the understanding of the effects of wastewater effluent on stream-water and streambed sediment quality, biological community composition, and ecosystem function in urban areas. After the addition of biological nutrient removal to the Middle Basin WWTF in 2010, annual mean total nitrogen concentrations in effluent decreased by 46 percent, but still exceeded the National Pollutant Discharge Elimination System (NPDES) wastewater effluent permit concentration goal of 8.0 milligrams per liter (mg/L); however, the NPDES wastewater effluent permit total phosphorus concentration goal of 1.5 mg/L or less was achieved at the Middle Basin WWTF. At the Tomahawk Creek WWTF, after the addition of chemically enhanced primary treatment in 2009, effluent discharges also had total phosphorus concentrations below 1.5 mg/L. After the addition of biological nutrient removal, annual total nitrogen and phosphorus loads from the Middle Basin WWTF decreased by 42 and 54 percent, respectively, even though effluent volume increased by 11 percent. Annual total phosphorus loads from the Tomahawk Creek WWTF after the addition of chemically enhanced primary treatment decreased by 54 percent despite a 33-percent increase in effluent volume. Total nitrogen and phosphorus from the WWTFs contributed between 30 and nearly 100 percent to annual nutrient loads in Indian Creek depending on streamflow conditions. In-stream total nitrogen primarily came from wastewater effluent except during years with the highest streamflows. Most of the in-stream total phosphorus typically came from effluent during dry years and from other urban sources during wet years. During 2010 through 2013, annual mean discharge from the Middle Basin WWTF was about 75 percent of permitted design capacity. Annual nutrient loads likely will increase when the facility is operated at permitted design capacity; however, estimated maximum annual nutrient loads from the Middle Basin WWTF were 27 to 38 percent lower than before capacity upgrades and the addition of biological nutrient removal to treatment processes. Thus, the addition of biological nutrient removal to the Middle Basin wastewater treatment process should reduce overall nutrient loads from the facility even when the facility is operated at permitted design capacity. The effects of wastewater effluent on the water quality of Indian Creek were most evident during below-normal and normal streamflows (about 75 percent of the time) when wastewater effluent represented about 24 percent or more of total streamflow. Wastewater effluent had the most substantial effect on nutrient concentrations in Indian Creek. Total and inorganic nutrient concentrations at the downstream sites during below-normal and normal streamflows were 10 to 100 times higher than at the upstream sites, even after changes in treatment practices at the WWTFs. Median total phosphorus concentrations during below-normal and normal streamflows at a downstream site were 43 percent lower following improvements in wastewater treatment processes. Similar decreases in total nitrogen were not observed, likely because total nitrogen concentrations only decreased in Middle Basin effluent and wastewater contributed a higher percentage to streamflows when nutrient samples were collected during the after-upgrade period. The wastewater effluent discharges to Indian Creek caused changes in stream-water quality that may affect biological community structure and ecosystem processes, including higher concentrations of bioavailable nutrients (nitrate and orthophosphorus) and warmer water temperatures during winter months. Other urban sources of contaminants also caused changes in stream-water quality that may affect biological community structure and ecosystem processes, including higher turbidities downstream from construction areas and higher specific conductance and chloride concentrations during winter months. Chloride concentrations exceeded acute and chronic exposure criteria at all Indian Creek study sites, regardless of wastewater influence, for weeks or months during winter. Streambed sediment chemistry was affected by wastewater (elevated nutrient and organic wastewater-indicator compound concentrations) and other contaminants from urban sources (elevated polyaromatic hydrocarbon concentrations). Overall habitat conditions were suboptimal or marginal at all sites; general decline in habitat conditions along the upstream-downstream gradient likely was caused by the cumulative effects of urbanization with increasing drainage basin size. Wastewater effluent likely affected algal periphyton biomass and community composition, primary production, and community respiration in Indian Creek. Functional stream health, evaluated using a preliminary framework based on primary production and community respiration, was mildly or severely impaired at most downstream sites relative to an urban upstream Indian Creek site. The mechanistic cause of the changes in these biological variables are unclear, though elevated nutrient concentrations were positively correlated with algal biomass, primary production, and community respiration. Macroinvertebrate communities indicated impairment at all sites, and Kansas Department of Health and Environment aquatic life support scores indicated conditions nonsupporting of aquatic life, regardless of wastewater influences. Urban influences, other than wastewater effluent discharge, likely control macroinvertebrate community structure in Indian Creek. Changes in treatment processes at the Middle Basin and Tomahawk Creek WWTFs improved wastewater effluent quality and decreased nutrient loads, but wastewater effluent discharges still had negative effects on the environmental and biological conditions at downstream Indian Creek sites. Wastewater effluent discharge into Indian Creek likely contributed to changes in measures of ecosystem structure (streamflow, water and streambed-sediment chemistry, algal biomass, and algal periphyton community composition) and function (primary production and community respiration) along the upstream-downstream gradient. Wastewater effluent discharges maintained streamflows and increased nutrient concentrations, algal biomass, primary production, and community respiration at the downstream sites. Functional stream health was severely impaired downstream from the Middle Basin WWTF and mildly impaired downstream from the Tomahawk WWTF relative to the urban upstream site. As distance from the Middle Basin WWTF increased, nutrient concentrations, algal biomass, primary production, and community respiration decreased, and functional stream health was no longer impaired 9.5 kilometers downstream from the discharge relative to the urban upstream site. Therefore, although wastewater effluent caused persistent changes in environmental and biological conditions and functional stream health at sites located immediately downstream from WWTF effluent discharges, some recovery to conditions more similar to the urban upstream site occurred within a relatively short distance.

Kansas↗

Threats and stressors to the health of the ecosystems of Lakes Mead and Mohave: Chapter 6 in A synthesis of aquatic science for management of Lakes Mead and Mohave

Ecosystem impacts from visitor activities or natural environmental change are important concerns in all units of the National Park system. Possible impacts to aquatic ecosystems at Lake Mead National Recreation Area (LMNRA) are of particular concern because of the designation of Lakes Mead and Mohave as critical habitat for the federally listed endangered razorback sucker (Xyrauchen texanus), the significance of the sport fishery, and the regional importance of its habitats to more than 90 documented species of waterbirds. Potential threats to shoreline habitats are of concern not only for their ecosystem values but also for maintaining the recreational setting. Many areas adjacent to the shorelines of Lakes Mead and Mohave are designated wilderness areas. For purposes of this document, stressors are any chemical, biological, or physical agent that has a detrimental effect on aquatic ecosystems at the organism, population, or community level. Human-made stressors at Lakes Mead and Mohave include direct effects of recreation on the lakes, like boating and fishing, as well as indirect effects of activities away from the lakes, such as growing population and increasing urbanization. Common natural environmental stressors include extended changes in climate (precipitation or temperature), or the erosion, transport, and loading of chemical constituents in rocks and sediments to aquatic environments. Human activity also can exacerbate natural stressors in a variety of ways.

Circular↗

Contaminant trends in sport fish from Lake Roosevelt and the upper Columbia River, Washington, 1994-1998

Fish from Lake Roosevelt were first reported to contain elevated concentrations of contaminants in the early 1980?s, with mercury, dioxins and furans, and polychlorinated biphenyls (PCBs) identified as being of most concern to human health. Over the following years there were a series of studies by United States and Canadian agencies addressing contaminants in fish from both a human and environmental perspective. In the early 1990?s, industrial discharges to the Columbia River above the international boundary decreased. The dominant changes in industrial practices included a reduction in slag and effluent discharges from a lead-zinc smelter, and a reduction in dioxins and furans due to processing changes at a Canadian pulp mill. It is believed that these two alterations in industrial practices may have greatly reduced the loading of selected contaminants to the Columbia River system. In response to these recent changes, the U.S. Geological Survey initiated this present study for the purpose of determining the present concentrations of mercury, dioxins and furans, and PCBs in fish, and, if possible, to determine if concentrations have changed since the 1994 studies. All contaminant analysis was done on fish fillets in order to address human health concerns. Our study concluded that the concentrations of contaminants in fish that were identified as a potential threat to human health have either not changed since the 1994 studies, or have decreased. PCBs, as determined by Aroclor 1254, do not appear to have changed between 1994 and 1998; sources of PCBs are presently unknown. In contrast, dioxins and furans, as indicated by 2,3,7,8-TCDF, did show a significant decrease in rainbow trout fillets from 1994 to 1998. However, there was no apparent change in the average 2,3,7,8-TCDF concentrations in mountain whitefish, with the reason uncertain at this time. Average concentrations of 2,3,7,8-TCDF were higher in mountain whitefish than in rainbow trout. Toxicity equivalence concentrations (TEC) are determined by summing the relative toxicity of individual congeners of dioxins, furans, and toxic ?dioxin-like? PCB congeners in individual fish. Rainbow trout from the upper reach have higher TECs than rainbow trout from the lower reach, with trout from the upper reach having a higher percentage of the toxicity from toxic ?dioxin-like? PCBs than dioxin and furan compounds. In relation to mercury, the concentrations of total mercury in walleye have significantly decreased by about 50 percent from 1994 to 1998.

Water-Resources Investigations Report↗

A review of benthic faunal surveys in San Francisco Bay

During the past 60 years, considerable effort has been expended in studies of the relations of the biotic community and physicochemical characteristics of San Francisco Bay water. In very recent years these studies have emphasized the relations between the 'state of health' of bottom-living invertebrates (the benthos) and the levels of pollutants in the bay. Benthic organisms, generally sessile, are unable to escape deleterious environmental changes, and they reflect these changes in alterations of normal species composition of assemblages and species abundance. Data that expands understanding of these relations in urbanized areas such as San Francisco Bay are critical. Because of the implications of such data in control of water quality, the U.S. Geological Survey undertook a review of the results and major conclusions of San Francisco Bay benthic surveys. The size and species composition of faunal assemblages are largely controlled by the salinity of the water, the texture of the bottom sediments, and locally by wastes discharged into the bay. Efforts to describe the structure and function of benthic communities of the bay and to quantify the effects of waste discharge on them have been hampered by inconsistent and often faulty sampling methodology and species identification. Studies made show a lack of information on the normal life processes of the organisms concerned. The diversity index (a mathematical expression of the number of kinds of organisms present at a location), commonly used to describe the 'health' of the benthic community, has been employed without regard for the need for standardizing methodology and species identifications or for understanding natural biological processes that affect such mathematical indices. There are few reliable quantitative data on the distribution of benthic organisms in San Francisco Bay with which future assessments of the 'health' of the benthic community might be compared. Methods for study of the benthos must be standardized, identifications of species verified by trained taxonomists, and new field and laboratory studies undertaken before we can expect to obtain an accurate description of the benthic fauna and its relations with the environment.

Circular↗

Techniques to improve ecological interpretability of black box machine learning models

Statistical modeling of ecological data is often faced with a large number of variables as well as possible nonlinear relationships and higher-order interaction effects. Gradient boosted trees (GBT) have been successful in addressing these issues and have shown a good predictive performance in modeling nonlinear relationships, in particular in classification settings with a categorical response variable. They also tend to be robust against outliers. However, their black-box nature makes it difficult to interpret these models. We introduce several recently developed statistical tools to the environmental research community in order to advance interpretation of these black-box models. To analyze the properties of the tools, we applied gradient boosted trees to investigate biological health of streams within the contiguous USA, as measured by a benthic macroinvertebrate biotic index. Based on these data and a simulation study, we demonstrate the advantages and limitations of partial dependence plots (PDP), individual conditional expectation (ICE) curves and accumulated local effects (ALE) in their ability to identify covariate–response relationships. Additionally, interaction effects were quantified according to interaction strength (IAS) and Friedman’s H 2 "> H 2 statistic. Interpretable machine learning techniques are useful tools to open the black-box of gradient boosted trees in the environmental sciences. This finding is supported by our case study on the effect of impervious surface on the benthic condition, which agrees with previous results in the literature. Overall, the most important variables were ecoregion, bed stability, watershed area, riparian vegetation and catchment slope. These variables were also present in most identified interaction effects. In conclusion, graphical tools (PDP, ICE, ALE) enable visualization and easier interpretation of GBT but should be supported by analytical statistical measures. Future methodological research is needed to investigate the properties of interaction tests. Supplementary materials accompanying this paper appear on-line.

Journal of Agricultural, Biological, and Environme↗

Mercury effects on predator avoidance behavior of a forage fish, golden shiner (Notemigonus crysoleucas)

Mercury contamination of fish is widespread in North America and has resulted in the establishment of fish consumption advisories to protect human health, However, the effects of mercury exposure to fish have seldom been investigated. We examined the effects of dietary mercury exposure at environmental levels in a common forage species, golden shiner (Notemigonus crysoleucas). Fish were fed either an unaltered diet (12 ng/g wet wt methylmercury [MeHg] as Hg), a low-Hg diet (455 ng/g Hg), or a high-Hg diet (959 ng/g Hg). After 90 d mean fish whole-body total Hg concentrations were 41, 230, and 518 ng/g wet wt, respectively, which were within the range of concentrations found in this species in northern U.S. lakes. There were no mortalities or differences in growth rate among groups. Groups of fish from each treatment were exposed to a model avian predator and their behavioral response videotaped for analysis. Brain acetylcholinesterase (AChE) activity was determined in fish after behavioral testing. Fish fed the high-Hg diet had significantly greater shoal vertical dispersal following predator exposure, took longer to return to pre-exposure activity level, and had greater shoal area after return to pre-exposure activity than did the other treatments, all of which would increase vulnerability of the fish to predation. There were no differences in brain AChE among treatments. We conclude that mercury exposure at levels currently occurring in northern United States lakes alters fish predator-avoidance behavior in a manner that may increase vulnerability to predation. This finding has significant implications for food chain transfer of Hg and Hg exposure of fish predators.

Environmental Toxicology and Chemistry↗

The Pacific northwest stream quality assessment

In 2015, the U.S. Geological Survey (USGS) National Water-Quality Assessment (NAWQA) program is assessing stream quality in the Pacific Northwest. The goals of the Pacific Northwest Stream Quality Assessment (Pacific Northwest study) are to assess the quality of streams in the region by characterizing multiple water-quality factors that are stressors to aquatic life and to evaluate the relation between these stressors and biological communities. The effects of urbanization and agriculture on stream quality for the Puget Lowlands and Willamette Valley are the focus of this regional study. Findings will provide the public and policymakers with information regarding which human and environmental factors are the most critical in affecting stream quality and, thus, provide insights about possible approaches to protect or improve the health of streams in the region. The Pacific Northwest study will be the third regional study by the NAWQA program, and it will be of similar design and scope as the first two—the Midwest in 2013 and the Southeast in 2014 (Van Metre and others, 2012, 2014).

Oregon, Washington↗

Estimated hydrologic budgets of kettle-hole ponds in coastal aquifers of southeastern Massachusetts

Kettle-hole ponds in southeastern Massachusetts are in good hydraulic connection to an extensive coastal aquifer system that includes the Plymouth-Carver aquifer system on the mainland and aquifers underlying Cape Cod. The ponds receive water from, and contribute water to, the underlying glacial aquifer; ponds also receive water from precipitation and lose water to evaporation from the pond surface. Some ponds are connected to surface-water drainage systems and receive water from or contribute water to streams or adjacent wetlands. The Massachusetts Department of Environmental Protection currently (2011) is developing Total Maximum Daily Loads of phosphorus for the freshwater ponds in the region to maintain the health of pond ecosystems; the amounts and sources of water fluxes into and out of the ponds are important factors in determining the amount of phosphorus that can be assimilated into a pond. To assist in this effort, the U.S. Geological Survey used groundwater-flow models of the coastal aquifer system to estimate hydrologic budgets-including inflows and outflows from the aquifer system and adjacent streams and wetlands, and recharge from precipitation-for 425 ponds in southeastern Massachusetts. Water fluxes through the ponds are a function of several factors, including the size, shape, and bathymetry of the pond, orientation of the pond relative to the regional hydraulic gradient, and hydrologic setting relative to the proximity of groundwater divides and discharge boundaries. Total steady-state fluxes through the ponds range from more than 3,300,000 to less than 2,000 cubic feet per day. For ponds without surface-water inlets or outlets, groundwater inflow accounts for 98 to 3 percent of total inflow; conversely, recharge onto the pond surface accounts for the remainder of inflow (between 2 and 97 percent). All natural flows from these ponds are through recharge from the pond into the aquifer. In one pond, about 94 percent of the total outflow is removed for water supply. For ponds that are connected to surface-water drainages, most inflow and outflow are through streams. Ponds that receive water from streams receive most (58 to 89 percent) of their water from those streams. Ponds that are drained by streams lose between 5 and 100 percent of their water to those streams.

Scientific Investigations Report↗

Geology and mining history of the Southeast Missouri Barite District and the Valles Mines, Washington, Jefferson, and St. Francois Counties, Missouri

The Southeast Missouri Barite District and the Valles Mines are located in Washington, Jefferson, and St. Francois Counties, Missouri, where barite and lead ore are present together in surficial and near-surface deposits. Lead mining in the area began in the early 1700’s and extended into the early 1900’s. Hand mining of lead in the residuum resulted in widespread pits (also called shafts or diggings), and there was some underground mining of lead in bedrock. By the 1860’s barite was recovered from the residuum by hand mining, also resulting in widespread diggings, but generally not underground mines in bedrock. Mechanized open-pit mining of the residuum for barite began in the 1920’s. Barite production slowed by the 1980’s, and there has not been any barite mining since 1998. Mechanized barite mining resulted in large mined areas and tailings ponds containing waste from barite mills. The U.S. Environmental Protection Agency (EPA) has determined that lead is present in surface soils in Washington and Jefferson Counties at concentrations exceeding health-based screening levels. Also, elevated concentrations of barium, arsenic, and cadmium have been identified in surface soils, and lead concentrations exceeding the Federal drinking-water standard of 15 micrograms per liter have been identified in private drinking-water wells. Potential sources of these contaminants are wastes associated with barite mining, wastes associated with lead mining, or unmined natural deposits of barium, lead, and other metals. As a first step in helping EPA determine the source of soil and groundwater contamination, the U.S. Geological Survey (USGS), in cooperation with the EPA, investigated the geology and mining history of the Southeast Missouri Barite District and the Valles Mines. Ore minerals are barite (barium sulfate), galena (lead sulfide), cerussite (lead carbonate), anglesite (lead sulfate), sphalerite (zinc sulfide), smithsonite (zinc carbonate), and chalcopyrite (copper-iron sulfide). The Cambrian Potosi Dolomite is the most important formation for the ore deposits, followed by the Eminence Dolomite. Because galena, sphalerite, and barite are less soluble than dolomite, chemical weathering of the ore-bearing dolomite bedrock resulted in the concentration of ore minerals in the residuum. Most of the barite and lead mining was in the residuum, which averages 10 to 15 feet thick. Lead mining by French explorers may have begun in 1719 along Old Mines Creek at Cabanage de Renaudiere, which was followed shortly by the discovery of lead and the development of lead mines at Mine Renault (also called Forche a Renault Mine), Old Mines, and at other places along the Big River, Mineral Fork, and Forche a Renault Creek. Lead mining began sometime between 1775 and 1780 at Mine a Breton, the name of which was later changed to Potosi. Other mining areas were developed in the early part of the 19th century, including Fourche a Courtois (Palmer Mines), the French Diggings, and the Richwoods Mines. Zinc became a valuable resource after the Civil War, and the Valles Mines was an important supplier of zinc as well as lead, with at least some production up until the 1920’s. Lead mining declined in the early part of the 20th century as mining in the Old Lead Belt, Mine La Motte, and the Tri-State District expanded. The earliest lead mines were diggings in the residuum and were round holes (shafts) about 4 feet in diameter dug with pick and shovel about 15–20 feet deep, with drifts dug a short distance laterally from the bottom of the shafts. This mining process was repeated a short distance away until a large area was covered with pits. Some mining in bedrock began by about 1800, with shafts as deep as 170 feet and as much as several hundred feet of lateral drifts. Smelting of the lead ore to elemental lead was first done using a log furnace, which was inefficient; estimates have been made that only about 50 percent of the lead was recovered, and the remainder was lost to the ashes (slags) and to volatilization. Starting in 1798, ash furnaces were used to smelt the ashes from the log furnaces. These two furnaces were worked in tandem for many years but were gradually replaced by other furnaces, including the Scotch hearth. Estimates of lead recovery as high as 80–90 percent have been made for the Scotch hearth. By the mid-1870’s the air furnace was being used, also with estimated lead recovery as high as 80–90 percent. Zinc furnaces were built when zinc became a valuable commodity, but much of the zinc ore was shipped out of the area, either to a smelter in St. Louis, Missouri, or to other smelters. The total lead and zinc production from the Southeast Missouri Barite District and the Valles Mines is estimated at 180,000 tons of lead and 60,000 tons of zinc. An estimated 97,000 tons of lead and an estimated 120,000 tons of zinc were lost during smelting. The estimated losses do not include losses at the mine site during mining and preparation for smelting, such as the loss of fine-grained galena during hand cleaning or the discarding of zinc ore before its value was known, for which no estimates are available. Hand mining for barite in the residuum was active by at least the 1860’s and peaked from 1905 to the 1930’s when several thousand people were engaged in barite mining. Hand mining (diggings) and cleaning of the ore was done in much the same way as earlier lead mining, with the additional use of a rattle box to further clean the barite. Mechanized open-pit mining of old barite diggings began in 1924 to recover barite left behind by hand mining, and washing plants were used to clean the clay from the barite. Hand mining, however, continued to thrive, and washer plants began to close temporarily in 1931; nearly all of the barite produced before 1937 was by hand mining. By the 1940’s, however, all barite mining was mechanized. Mechanized mining used shovels powered by steam, gasoline, or electricity (and by the 1950’s draglines and front-end loaders) to mine the residuum. The ore was loaded onto rail cars (and by the 1940’s, trucks) for shipment to washer plants. Clay was removed from the barite using a log washer, and a jig was used to concentrate the barite. Overflow from the log washers was waste and went to a mud (tailings) pond. The coarse jig tailings went to tailings piles or were used as railroad ballast and, later, to create roads within the mine pit. Some barite was ground, depending on its final use, and some ground barite was bleached using a hot solution of sulfuric acid to remove impurities such as iron minerals and lead sulfide (galena). An earlier bleaching process used lead-lined tanks. Large quantities of water were required for milling the barite; some was recirculated water and the remainder came from dammed streams or was pumped from wells. Tailings and wastewater were impounded behind dikes that were built across small valleys and were increased in height as necessary using washer waste and any overburden that had been stripped. In some cases, dikes were built across valleys that had already been mined for barite. The total production of barite from the Southeast Missouri Barite District and the Valles Mines is estimated to have been about 13.1 million tons. Most of the barite production was from Washington County. Hand mining and processing of barite was inefficient. Estimates of barite recovery range from less than one-fourth to about one-half because pillars between the shafts in the residuum needed to be left unmined for stability. With mechanized mining, large amounts of barite were lost during the milling process. It has been estimated that about 30 percent of the barite was lost and that about two-thirds of the lost barite was fine-grained and was discharged to the tailings ponds. Some galena was lost to the tailings ponds. A 1972 inventory of tailings ponds by the Missouri Geological Survey identified 67 ponds in the Southeast Missouri Barite District (there are more than this currently documented). Results from samples from four ponds that were drilled were used to estimate that the 67 ponds contained almost 39 million tons (or cubic yards) of tailings averaging about 5 percent barite, for a potential reserve of 1.935 million tons of barite. It is not known how much lead was removed during barite mining, either by hand or mechanized mining and processing, how much lead was recovered, or how much lead went as fines to the tailing ponds or as coarse material to mine roads or was otherwise lost.

Missouri↗

Factors influencing tropical island freshwater fishes:Species, status, and management implications in puerto rico [Factores que influencian a los peces tropicales de agua dulce: Especies, estado actual e implicaciones para el manejo en Puerto Rico]

Anthropogenic effects including river regulation, watershed development, contamination, and fish introductions have substantially affected the majority of freshwater habitats in Europe and North America. This pattern of resource development and degradation is widespread in the tropics, and often little is known about the resources before they are lost. This article describes the freshwater resources of Puerto Rico and identifies factors that threaten conservation of native fishes. The fishes found in freshwater habitats of Puerto Rico represent a moderately diverse assemblage composed of 14 orders, 29 families, and 82 species. There are fewer than 10 species of native peripherally-freshwater fish that require a link to marine systems. Introductions of nonindigenous species have greatly expanded fish diversity in freshwater systems, and native estuarine and marine species (18 families) also commonly enter lowland rivers and brackish lagoons. Environmental alterations, including land use and development, stream channelization, pollution, and the impoundment of rivers, combined with nonnative species introductions threaten the health and sustainability of aquatic resources in Puerto Rico. Six principal areas for attention that are important influences on the current and future status of the freshwater fish resources of Puerto Rico are identified and discussed.

Fisheries↗

The Upper Midwest Aerospace Consortium Environmental Information Network: Building ‘Learning Communities’ in the Northern Great Plains

In the last two decades alone, the U.S. and large portions of the world have witnessed what can be aptly be described as an explosion of scientific information and technological innovations that has permeated almost every aspect of our lives. Given these trends, it is clear that science and the understanding of science are becoming increasingly more relevant and essential to decision-makers and the decision-making process. Every environmental issue confronting society has an undisputed scientific underpinning. Understanding the implications of the science underpinning issues of particular importance to the health and well being of society constitutes the basis for making more informed and enlightened decisions. However obvious this linkage may be, many factors continue to serve as impediments to the broader understanding and incorporation of science into policy- and decision-making processes, as perhaps is best exemplified by the case of climate science.

Idaho, Montana, North Dakota, South Dakota, Wyomin↗

White perch health relative to urbanization and habitat degradation in Chesapeake Bay tributaries. II. Hepatic and splenic macrophage aggregates

Macrophage aggregate (MA) abundance in fish is a useful general biomarker of contaminant exposures and environmental stress. Hepatic and splenic MAs were evaluated in semi-anadromous white perch Morone americana (Gmelin, 1789) from the urbanized Severn River (S) and the more rural Choptank River (C), Chesapeake Bay. Fish were collected from different sites in the annual migratory circuit in each river that corresponded to active spawning in late winter-early spring, summer regenerating, autumn developing, and winter spawning-capable phases. An age-associated progressive increase in the total volume of MAs (MAV) was evident in the liver and spleen. Mean hepatic MAV (range in seasonal means, C: 6.4-23.1 mm 3 ; S: 15.7-48.7 mm 3 ) and mean splenic MAV (C: 7.3-12.6 mm 3 ; S: 16.0-33.0 mm 3 ) differed significantly among seasons and were significantly greater in females and in Severn River fish. Age and river were the most influential factors, suggesting that increased MAV in Severn River fish resulted from chronic exposures to higher concentrations of environmental contaminants. Hepatic MAV was directly related to the relative volume of copper granules in the liver. Less influential factors on splenic MAV included fish condition, trematode infections, and granulomas, indicating possible functional differences in MAs by organ. While organ volumes were strongly linked to gonadosomatic index (GSI) and reproductive phase, the reason for seasonal differences in MAV was less clear. Water temperature, salinity, and dissolved oxygen were not significantly related to MAV, and indicators of reproductive phase (hepatosomatic index and GSI) were significant but less important in explaining variation in MAV.

Chesapeake Bay watershed↗

Arsenic in streams, stream sediments, and ground water, Fairbanks area, Alaska

Arsenic concentrations of less than 5 ppb to as large as 1,260 ppb in stream waters and from 5 ppm to 4,000 ppm in stream sediments were found in the Pedro Dome-Cleary Summit area, Alaska. Waters from three of 20 wells sampled had arsenic concentrations exceeding the U.S. Public Health Service recommended limit of 50 ppb. The high arsenic levels are a consequence of arsenic enrichment in the rocks of the area. Placer and lode-gold mining may increase the arsenic content of the waters by exposing arsenic-containing rocks to surface waters and by increasing the load of arsenic-rich sediments in the streams. Finding these disturbingly large concentrations of arsenic in the waters of the Fairbanks area was the major result of this work, inasmuch as a subsequent study (to be published) revealed arsenic concentrations as large as 10 ppm in domestic wells and prompted an extensive study by Federal and State agencies of the health hazard posed by these arsenic-rich waters.

Alaska↗

Guidance documents: Continued support to improve operations of fish hatcheries and field sites to reduce the impact or prevent establishment of New Zealand Mudsnails and other invasive mollusks

This project tested and revised a risk assessment/management tool authored by Moffitt and Stockton designed to provide hatchery biologists and others a structure to measure risk and provide tools to control, prevent or eliminate invasive New Zealand mudsnails (NZMS) and other invasive mollusks in fish hatcheries and hatchery operations. The document has two parts: the risk assessment tool, and an appendix that summarizes options for control or management. The framework of the guidance document for risk assessment/hatchery tool combines approaches used by the Hazard Analysis and Critical Control Points (HACCP) process with those developed by the Commission for Environmental Cooperation (CEC), of Canada, Mexico, and the United States, in the Tri-National Risk Assessment Guidelines for Aquatic Alien Invasive Species. The framework approach for this attached first document assesses risk potential with two activities: probability of infestation and consequences of infestation. Each activity is treated equally to determine the risk potential. These two activities are divided into seven basic elements that utilize scientific, technical, and other relevant information in the process of the risk assessment. To determine the probability of infestation four steps are used that have scores reported or determined and averaged. This assessment follows a familiar HACCP process to assess pathways of entry, entry potential, colonization potential, spread potential. The economic, environmental and social consequences are considered as economic impact, environmental impact, and social and cultural influences. To test this document, the Principal Investigator worked to identify interested hatchery managers through contacts at regional aquaculture meetings, fish health meetings, and through the network of invasive species managers and scientists participating in the Western Regional Panel on Aquatic Nuisance Species and the 100th Meridian Initiative's Columbia River Basin Team, and the Western New Zealand Mudsnail Conference in Seattle. Targeted hatchery workshops were conducted with staff at Dworshak National Fish Hatchery Complex (ID), Similkameen Pond, Oroville WA, and Ringold Springs State Hatchery (WA). As a result of communications with hatchery staff, invasive species managers, and on site assessments of hatchery facilities, the document was modified and enhanced. Additional resources were added to keep it up to date. The result is a more simplified tool that can lead hatchery or management personnel through the process of risk assessment and provide an introduction to the risk management and communication process. In addition to the typical HACCP processes, this tool adds steps to rate and consider uncertainty and the weight of evidence regarding options and monitoring results . Uncertainty of outcome exists in most tools that can be used to control or prevent NZMS or other invasive mollusks from infesting an area. In additional this document emphasizes that specific control tools and plans must be tailored to each specific setting to consider the economic, environmental and social influences. From the testing and evaluation process, there was a strong recognition that a number of control and prevention tools previously suggested and reported in the literature from laboratory and small scale trials may not be compatible with regional and national regulations, economic constraints, social or cultural constraints, engineering or water chemistry characteristics of each facility. The options for control are summarized in the second document, Review of Control Measures for Hatcheries Infested with NZMS (Appendix A) that provides sources for additional resources and specific tools, and guidance regarding the feasibility and success of each approach. This tool also emphasizes that management plans need to be adaptive and incorporate oversight from professionals familiar with measuring risks of fish diseases, and treatments (e.g. the fish health practitioners and water quality and effluent management teams). Finally, with such a team, the adaptive management approach must be ongoing, and become a regular component of hatchery operations. Although it was the intent that this two part document would be included as part of the revised National Management and Control Plan for the NZMS proposed by the U.S. Fish and Wildlife Service (USFWS) and others, it is provided as a stand-alone document.

Cooperator Science Series↗