Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Washington Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52Linked to original sources

Water resources of Washington Parish, Louisiana

Information concerning the availability, use, and quality of water in Washington Parish, Louisiana, is critical for proper water-resource management. The purpose of this fact sheet is to present information that can be used by water managers, parish residents, and others for stewardship of this vital resource. Information on the availability, past and current use, use trends, and water quality from groundwater and surface-water sources in the parish is presented. Previously published reports and data stored in the U.S. Geological Survey’s National Water Information System ( http://waterdata.usgs.gov/nwis ) are the primary sources of the information presented here. In 2010, about 34.55 million gallons per day (Mgal/d) of water were withdrawn in Washington Parish, including about 28.10 Mgal/d from groundwater sources and 6.44 Mgal/d from surface-water sources1 (table 1). Withdrawals for industrial use accounted for about 52 percent (17.80 Mgal/d) of the total water withdrawn (table 2). Other categories of use included public supply, rural domestic, irrigation, and livestock. Water-use data collected at 5-year intervals from 1960 to 2010 (fig. 2) indicated that water withdrawals peaked in 1975 at about 51.9 Mgal/d.

Louisiana↗

Following the tug of the audience from complex to simplified hazards maps at Cascade Range volcanoes

Volcano-hazard maps are broadly recognized as important tools for forecasting and managing volcanic crises and for disseminating spatial information to authorities and people at risk. As scientists, we might presume that hazards maps can be developed at the time and with the methods of our discretion, yet the co-production of maps with stakeholder groups, who have programmatic needs of their own, can sway the timing, usability, and acceptance of map products. We examine two volcano hazard map-making efforts by staff at the U.S. Geological Survey. During the 1990s and early 2000s scientists developed a series of hazard assessments and maps with detailed zonations for volcanoes in Washington and Oregon. In 2009, the National Park Service expressed the need for simplified versions of the existing hazard maps for a high-profile visitor center exhibit. This request created an opportunity for scientists to rethink the objectives, scope, content, and map representations of hazards. The primary focus of this article is a discussion of processes used by scientists to distill the most critical information within the official parent maps into a series of simplified maps using criteria specified. We contextualize this project with information about development of the parent maps, public response to the simplified hazard maps, the value of user engagement in mapmaking, and with reference to the abundance of guidance available to the next generation of hazard-mapmakers. We argue that simplified versions of maps should be developed in tandem with any hazard maps that contain technical complexities, not as a replacement, but as a mechanism to broaden awareness of hazards. We found that when scientists endeavor to design vivid and easy-to-understand maps, people in many professions find uses for them within their organization’s information products, resulting in extensive distribution.

Washington↗

Concentrations and loads of cadmium, lead, and zinc measured on the ascending and descending limbs of the 1999 snowmelt-runoff hydrographs for nine water-quality stations, Coeur d'Alene River basin, Idaho

The Remedial Investigation/Feasibility Study conducted by the U.S. Environmental Protection Agency within the Spokane River Basin of northern Idaho and eastern Washington included extensive data-collection activities to determine the nature and extent of trace-element contamination within the basin. The U.S. Geological Survey designed and implemented synoptic sampling of a high-flow runoff event at selected water-quality stations during the 1999 water year. The objective was to quantify spatial and temporal differences in constituent concentrations and loads over the ascending and descending limbs of a hydrograph depicting a high-flow runoff event. Discharge and water-quality data were collected during spring 1999 snowmelt runoff (May through early June) at nine water-quality stations, one on the North Fork Coeur d’Alene River and eight on the South Fork Coeur d’Alene River. The nine stations were sam- pled for whole-water recoverable and dissolved concentrations and loads of cadmium, lead, and zinc. The concentrations and loads sampled during the 1999 snowmelt-runoff event represented near-normal conditions, not flood conditions, in that the recurrence interval for discharge near the hydrograph peak was about 2 years. The general trend among the nine stations was an inverse relation between discharge and dissolved concentrations of cadmium, lead, and zinc, and a direct relation between discharge and whole-water recoverable concentrations of these constituents. The smallest loads of dissolved and whole-water recoverable cadmium, lead, and zinc were measured at South Fork Coeur d’Alene River above Deadman Gulch; constituent concentrations at this site were some of the smallest among those sampled, and discharge was also relatively small. The largest loads of dissolved and whole-water recoverable cadmium, lead, and zinc were measured at South Fork Coeur d’Alene River at Pinehurst; constituent concentrations at this site were large and discharge was the second-largest of all the discharge measurements. Hysteresis effects on concentrations and loads over the ascending and descending limbs of the snowmelt-runoff hydrograph were quite apparent, especially for whole-water recoverable constituents. Hysteresis is present when a property, such as constituent concentration or load, has different values for a given discharge over the ascending and descending limbs of a hydrograph. During this study, loads of whole-water recoverable constituents on the ascending limb were between 1.5 and 3.6 times larger than those mea- sured on the descending limb at nearly equal discharge. In contrast, dissolved constituents showed minimal hysteresis effects.

Idaho↗

Concentrations and loads of cadmium, lead, and zinc measured near the peak of the 1999 snowmelt-runoff hydrographs for 42 water-quality stations, Coeur d'Alene River basin, Idaho

The Remedial Investigation/Feasibility Study conducted by the U.S. Environmental Protection Agency within the Spokane River Basin of northern Idaho and eastern Washington included extensive data-collection activities to determine the nature and extent of trace-element contamination within the basin. The U.S. Geological Survey designed and implemented synoptic sampling of the 1999 snowmelt-runoff event at 42 water- quality stations during the 1999 water year. The distribution of the 42 stations was as follows: North Fork Coeur d’Alene River and tributaries, 4 stations; South Fork Coeur d’Alene River, 13 stations; Canyon, Ninemile, and Pine Creeks, 4 stations each; other tributaries to South Fork Coeur d’Alene River, 10 stations; and main stem Coeur d’Alene River, 3 stations. The objective was to synoptically collect discharge and water-quality data in order to significantly improve the estimation of trace-element loads from multiple contributing source areas during the snowmelt-runoff event. Discharge and water-quality data were collected near the peak discharge during late May 1999. Each station was sampled for whole-water recoverable and dissolved concentrations and loads of cadmium, lead, and zinc. Three general concentration levels of cadmium, lead, and zinc were noted among the 42 stations. Dissolved cadmium concentrations were less than 1 microgram per liter (μg/L) at 26 stations, exceeded 10 μg/L at 1 station, and ranged from 1 to 10 μg/L at the remaining 15 stations. Whole-water recoverable cadmium concentrations were less than 1 μg/L at 23 stations, exceeded 10 μg/L at 4 stations, and ranged from 1 to 10 μg/L at the remaining 15 stations. Dissolved lead concentrations were less than 1 μg/L at 22 stations, exceeded 10 μg/L at 7 stations, and ranged from 1 to 10 μg/L at the remaining 13 stations. Whole-water recoverable lead concentrations were less than 10 μg/L at 13 stations, exceeded 500 μg/L at 20 stations, and ranged from 10 to 500 μg/L at the remaining 9 stations. Dis- solved zinc concentrations were less than 10 μg/L at 14 stations, exceeded 500 μg/L at 6 stations, and ranged from 10 to 500 μg/L at the remaining 22 stations. Whole-water recoverable zinc concentrations were less than 10 μg/L at 9 stations, exceeded 500 μg/L at 15 stations, and ranged from 10 to 500 μg/L at the remaining 18 stations. The accounting of tributary loads between two South Fork stations at O’Brien Gulch and Pinehurst revealed differences between dissolved and whole-water recoverable loads, as well as differences among the three trace elements. Tributary loads accounted for an average of 29 percent (range of 27 to 31.6 percent) of the differences in whole-water recoverable loads of the three trace elements between the O’Brien Gulch and Pinehurst stations. This result implies that the main stem of the South Fork Coeur d’Alene River is an important source of sediment-associated trace elements under elevated streamflows. In the case of dissolved loads of cadmium and zinc, the tributary loads accounted for about one-half (range of 47.3 to 55 percent) of the differences between the two South Fork stations. As with whole-water recoverable loads, this result indicates an important source of dissolved cadmium and zinc within the main stem. The picture is much different for dissolved lead loads: About 94 percent of the load difference between the O’Brien Gulch and Pinehurst stations was accounted for by loads from the 13 tributaries. The Coeur d’Alene River near Harrison transported 924 pounds of dissolved lead per day, of which 82.8 pounds came from the South Fork and 11.7 pounds from the North Fork. Only 10.2 percent of the load at Harrison was measured at the Pinehurst and Enaville stations; therefore, a substantial load of dissolved lead is being contributed downstream from the confluence of the North and South Forks.

Idaho↗

Historical streamflow and stage data compilation for the Lower Columbia River, Pacific Northwest

The U.S. Geological Survey mined data from a variety of national and state agencies including USGS, Oregon Water Resources Department, National Oceanic and Atmospheric Administration, Washington Department of Ecology, Pacific Northwest National Laboratory, Portland State University, and U.S. Army Corps of Engineers. A comprehensive dataset of streamflow, stage, and tidal elevations for the Lower Columbia River basin was compiled. Data were compiled from gaging stations in Oregon and Washington along the Columbia River from Astoria to The Dalles and along the Willamette River from Salem to Portland. Tidal gages along the Washington, Oregon, and California coasts were also compiled. Seasonal maximum values were calculated for both streamflow and stage for the winter (November–March) and spring (April–July) flow seasons, as well as for the full water year when underlying data were available. The aggregated datasets are available at https://doi.org/10.5066/P9R6RT0Z .

California, Oregon, Washington↗

Hydrologic data for the Usquepaug-Queen River basin, Rhode Island

The Usquepaug-Queen River ground-water reservoir in Rhode Island is part of the stratified-drift aquifer along the Usquepaug-Queen River and its tributaries. The thickest, most permeable parts of the aquifer form the Usquepaug-Queen River ground-water reservoir. The 36.1-square mile study area comprises parts of Washington and Kent counties, and includes parts of the towns of Exeter, North Kingstown, Richmond, South Kingstown, and West Greenwich. The report presents geologic and hydrologic information needed for the prediction and management of hydrologic effects of proposed ground-water development. The report describes aquifer lithology, provides historical data on water-level and aquifer-storage changes, provides information on ground-water quality, and presents natural flow characteristics and water quality of streams in the Usquepaug-Queen River area. The data includes 275 ground-water sites; lithologic logs of 66 ground-water sites; water levels for 43 ground- water sites; chemical analyses of 36 ground-water sites; stream discharge measurements from the continuous-record gaging station on the Usquepaug- Queen River; discharge measurements at 10 partial- record stations in the area; chemical analyses of 17 stream sites; and the data from 14 slug tests conducted at ground-water sites.

Open-File Report↗

Some stream waters of the Western United States, with chapters on sediment carried by the Rio Grande and the industrial application of water analyses

A systematic study of the waters likely to be utilized on the Reclamation Service projects was made in order to determine the influence of the salinity of the waters on the growth of vegetation and the effect of suspended matter in silting canals and reservoirs. The work was begun early in 1905, under the direction of Thomas H. Means, engineer, and was continued during 1906 and until May, 1907, under the direction of W. H. Heileman, engineer. The analyses were made in a laboratory established at quarters provided by the University of California at Berkeley, Cal., by C. H. Stone, P. L. McCreary, F. M. Eaton, O. J. Hawley, W. C. Riddell, F. T. Berry, H. A. Burns, J. H. Hampson, J. A. Pearce, and M. Vaygouny, the greater part of the work being that of the first five named. C. H. Stone was chemist in charge at the beginning of the investigations and is chiefly responsible for the plan of the analytical work and the methods of analysis. The results of the investigations were prepared for publication under instructions from F. H. Newell, Director of the United States Reclamation Service, by Herman Stabler, assistant engineer, who assembled and checked- the analyses, compiled the accompanying stream-flow data from records of the United States Geological Survey, and computed daily discharge of suspended matter and dissolved solids, under the supervision of D. W. Murphy, engineer in charge of Washington office engineering.

Water Supply Paper↗

Data-collection methods, quality-assurance data, and site considerations for total dissolved gas monitoring, lower Columbia River, Oregon and Washington, 2000

Excessive total dissolved gas pressure can cause gas-bubble trauma in fish downstream from dams on the Columbia River. In cooperation with the U.S. Army Corps of Engineers, the U.S. Geological Survey collected data on total dissolved gas pressure, barometric pressure, water temperature, and probe depth at eight stations on the lower Columbia River from the John Day forebay (river mile 215.6) to Camas (river mile 121.7) in water year 2000 (October 1, 1999, to September 30, 2000). These data are in the databases of the U.S. Geological Survey and the U.S. Army Corps of Engineers. Methods of data collection, review, and processing, and quality-assurance data are presented in this report.

Oregon, Washington↗

The Pacific Northwest; linkage between earthquake and volcano hazards

AS the title of the magazine Earthquake and Volcanoes suggests, these two geological phenomena are often closely associated. Earthquakes frequently precede volcanic eruptions, and volcanoes are often sources of small to intermediate size earthquakes resulting from the movement of magma within the volcano's plumbing system. In the Pacific Northwest, the association between earthquakes and volcanoes is much more fundamental- they both arise from the same large-scale interaction between two plates of the Earth's crust. The oceanic Juan de Fuca plate is being shoved beneath the edge of the continental North American plate in the process known as subduction. The result is the Cascade chain of volcanoes, the potential for very large earthquakes along the coastal margin, and the generation of stresses that produce other regional earthquakes. The Pacific Northwest (Oregon, Washington, and northern California) is experiencing rapid industrial and population growth. The same conditions that make the region attractive- close proximity to both mountains and oceans, volcanoes and spectacular inland waters- also present significant geologic hazards that are easily overlooked in the normal timetable of human activities. The catastrophic eruption of Mount St. Helens 10 years ago serves as a dramatic reminder of the forces of nature that can be unleashed through volcanism. other volcanoes such as mount Rainier, a majestic symbol of Washington, or Mount hood in Oregon, lie closer to population centers and could present far greater hazards should they become active. Earthquakes may affect even larger regions, prodcuging more cumulative damage.

Pacific Northwest↗

A conceptual site model of contaminant transport pathways from the Bremerton Naval Complex to Sinclair Inlet, Washington, 2011–21

Historical activities on the Bremerton Naval Complex (BNC) in Puget Sound, Washington, have resulted in Sinclair Inlet sediments with elevated concentrations of contaminants, including organic contaminants such as polychlorinated biphenyls and trace elements including mercury. Six U.S. Geological Survey–U.S. Navy datasets have been collected since the last major assessment, in 2013, of soil and groundwater contaminant transport pathways and mercury loading estimates from the BNC to Sinclair Inlet. These include: mercury isotope analysis to support sourcing of mercury in Sinclair Inlet; mercury sampling within the dry dock systems; nearshore thermal surveys to identify potential groundwater discharge locations to Sinclair Inlet; time-series monitoring in nearshore wells to understand the inland extent and dynamics of the tidal mixing zone; tidal studies of mercury in nearshore monitoring wells in an area of contaminated fill material called Site 1; and a spatial survey of trace elements and other parameters in nearshore monitoring wells, pore water, seeps, surface water, and sediment along unwalled shorelines in the western part of the BNC. The results were incorporated into an updated Conceptual Site Model and used to update contaminant load estimates from the terrestrial BNC to Sinclair Inlet. The results from these studies provide data to the U.S. Navy to support prioritization of on-going remediation actions to manage contamination on the BNC that reduce potential impacts to Sinclair Inlet sediment, surface water, and fish and shellfish tissue. Mercury isotope analysis of surface sediments and particulate material indicated that a similar industrial mercury profile is present throughout Puget Sound, including terrestrial and marine BNC samples and in other Sinclair Inlet sediments and persists across regions with low and elevated mercury concentrations. Two sources of mercury at the BNC are Sites 1 and 2 subsurface soils/fill material, with total mercury concentrations in particulates collected from the bottom of monitoring wells drilled in these materials ranging from 18,000 to 44,000 nanograms per gram (as compared to the Washington State Marine Sediment Cleanup Screening Level of 590 nanograms per gram). Contaminants are transported from the terrestrial BNC to Sinclair Inlet via three primary pathways, (1) stormwater outfalls, (2) dry dock discharges, and (3) direct discharge along unwalled shorelines. Previous loading estimates (based on filtered total mercury) ranked stormwater outfalls, particularly outfall PSNS015 in Site 2 soils, as the largest soil and groundwater contaminant transport pathway from the terrestrial BNC to Sinclair Inlet. Updated loading estimates in this report suggest that the dry dock systems may be a larger pathway of mercury from the terrestrial BNC to Sinclair Inlet than previously thought, within the same order of magnitude as the PSNS015 storm-drain system. Trace-element loads via direct shoreline discharge are difficult to estimate due to the large and dynamic tidal mixing zone of groundwater and seawater in the nearshore along unwalled shorelines. However, current best estimated ranges suggest that direct shoreline discharge is one of the three main pathways and may contribute smaller mercury loads than the stormwater and the dry dock systems. Along unwalled shorelines, direct groundwater discharge of terrestrial contaminants may be less important than recirculating seawater in the nearshore mixing zone that can extract contaminants from nearshore subsurface material. Total estimated mercury loads from the terrestrial BNC to Sinclair Inlet range from approximately 40 to 200 grams of filtered total mercury per year and a minimum of 70–350 grams of particulate total mercury per year, for a minimum total of 110–525 grams of whole (filtered plus particulate) total mercury per year. Data gaps are identified that, if filled, would further refine the Conceptual Site Model and contaminant loading estimates from the terrestrial BNC to Sinclair Inlet.

Washington↗

Watershed scale response to climate change--Naches River Basin, Washington

General Circulation Model simulations of future climate through 2099 project a wide range of possible scenarios. To determine the sensitivity and potential effect of long-term climate change on the freshwater resources of the United States, the U.S. Geological Survey Global Change study, "An integrated watershed scale response to global change in selected basins across the United States" was started in 2008. The long-term goal of this national study is to provide the foundation for hydrologically based climate change studies across the nation. Fourteen basins for which the Precipitation Runoff Modeling System has been calibrated and evaluated were selected as study sites. Precipitation Runoff Modeling System is a deterministic, distributed parameter watershed model developed to evaluate the effects of various combinations of precipitation, temperature, and land use on streamflow and general basin hydrology. Output from five General Circulation Model simulations and four emission scenarios were used to develop an ensemble of climate-change scenarios for each basin. These ensembles were simulated with the corresponding Precipitation Runoff Modeling System model. This fact sheet summarizes the hydrologic effect and sensitivity of the Precipitation Runoff Modeling System simulations to climate change for the Naches River Basin below Tieton River in Washington.

Washington↗

Catalog of Mount St. Helens 2004 - 2005 tephra samples with major- and trace-element geochemistry

This open-file report presents a catalog of information about 135 ash samples along with geochemical analyses of bulk ash, glass and individual mineral grains from tephra deposited as a result of volcanic activity at Mount St. Helens, Washington, from October 1, 2004 until August 15, 2005. This data, in conjunction with that in a companion report on 2004-2007 Mount St. Helens dome samples by Thornber and others (2008a) are presented in support of the contents of the U.S. Geological Survey Professional Paper 1750 (Sherrod and others, ed., 2008). Readers are referred to appropriate chapters in USGS Professional Paper 1750 for detailed narratives of eruptive activity during this time period and for interpretations of sample characteristics and geochemical data presented here. All ash samples reported herein are currently archived at the David A. Johnston Cascades Volcano Observatory in Vancouver, Washington. The Mount St. Helens 2004?2005 Tephra Sample Catalogue along with bulk, glass and mineral geochemistry are tabulated in 6 worksheets of the accompanying Microsoft Excel file, of2008-1131.xls. Samples in all tables are organized by collection date. Table 1 is a detailed catalog of sample information for tephra deposited downwind of Mount St. Helens between October 1, 2004 and August 18, 2005. Table 2 provides major- and trace-element analyses of 8 bulk tephra samples collected throughout that interval. Major-element compositions of 82 groundmass glass fragments, 420 feldspar grains, and 213 mafic (clinopyroxene, amphibole, hypersthene, and olivine) mineral grains from 12 ash samples collected between October 1, 2004 and March 8, 2005 are presented in tables 3 through 5. In addition, trace-element abundances of 198 feldspars from 11 ash samples (same samples as major-element analyses) are provided in table 6. Additional mineral and bulk ash analyses from 2004 and 2005 ash samples are published in chapters 30 (oxide thermometry; Pallister and others, 2008), 32 (amphibole major elements; Thornber and others, 2008b) and 37 (210Pb; 210Pb/226Pa; Reagan and others, 2008) of U.S. Geological Survey Professional Paper 1750 (Sherrod and others, 2008). A brief overview of sample collection methods is given below as an aid to deciphering the tephra sample catalog. This is followed by an explanation of the categories of sample information (column headers) in table 1. A summary of the analytical methods used to obtain the geochemical data in this report introduces the presentation of major- and trace-element geochemistry of Mount St. Helens 2004-2005 tephra samples in tables 2-6. Rhyolite glass standard analyses are reported (Appendix 1) to demonstrate the accuracy and precision of similar glass analyses presented herein.

Washington↗

A survey of non-USGS continuous streamflow gaging networks in the Pacific Northwest

Extensive streamflow data sources exist beyond the largest streamflow data provider in the United States, the U.S. Geological Survey. We developed and distributed a survey to about 300 individuals and organizations that collect streamflow data across the Pacific Northwest (Idaho, Oregon, Washington). We received 100 responses with 56% of those sufficiently complete to include in the analysis. From these responses, there are about 2000 streamflow monitoring locations in the region beyond the USGS monitoring network. The duration of record for gages is related to the size of the streamflow gaging network, with small and large networks generally operating monitoring locations for less than 5 years and more than 10 years, respectively. Quality assurance and quality control are variable across organizations, with 41% of respondents having at least two review steps and 13% that audit their data for long-term consistency. Results of this survey begin to establish the differing capabilities of large and small stream gaging networks and highlight how supporting the overall quality streamflow data collection and management within the water resources community will improve our ability to harmonize these datasets in the future.

Idaho, Montana, Nevada, Oregon, Washington, Wyomin↗

Airborne biogeophysical mapping of hidden mineral deposits

Airborne survey techniques have been developed to detect and map forest canopies affected by metal-induced stress. A high spectral resolution airborne spectroradiometer system, used over a known forest-covered copper soil anomaly, has revealed previously unknown spectral changes in the near-infrared chlorophyll absorption spectrum. The metal-induced spectral shifts have subsequently been reproduced in the laboratory at Columbia University. Waveform analysis techniques specifically designed for computer analysis of the high spectral resolution aircraft data filter out the very strong background noise introduced by variations in normal, unstressed vegetation canopy and by topographic effects. The wave-form method proves most effective in extracting the subtle spectral indicators of metal-induced stress. The analytic method is a unique frequency domain technique made possible by the high spectral resolution of the 500-channel spectroradiometer system. The biogeophysical technique is demonstrated by three mapping surveys of Cotter Basin, Montana, and Spirit Lake, Washington. This airborne mapping technique presents new application opportunities in large areas of the world where heavy forest cover has in the past made geologic and geophysical exploration tedious and expensive. The tree cover with widespreading and deeply penetrating root systems is turned to an advantage in the airborne biogeophysical technique by detecting metal-induced changes in the chlorophyll reflectance spectrum.

Montana↗

Seismotectonic map of the Puget Sound region, Washington

The Puget Sound region is a seismically active area with hundreds of earthquakes occurring each year (Crosson, 1974, 1975, Crosson and Millard, 1975, Crosson and Noson, 1978a, 1978b, 1979). Most of the earthquakes are so small that they can be detected only by sensitive seismographs such as those operated by the University of Washington. Not all of the earthquakes have been small, however, for several damaging ones have occurred in historic time. Little is known about the geologic structures responsible for generating these earthquakes, and knowledge of the causative structures is fundamental to an adequate evaluation of the earthquake risks for the Puget Sound region. The purpose of this map is to summarize the current knowledge about tectonic deformation, seismicity, and the tectonic framework of the Puget Sound region in order to provide a basis for detailed geologic and geophysical studies that will lead to better understanding of the structures and forces responsible for generating earthquakes in the area. This map is a compilation of all known and inferred faults, including what is known about their age of movement. Also shown are some deformed deposits of Quaternary age and earthquake epicenters. Few of the faults have been studied in sufficient detail to establish whether or not they have been active or inactive during late Tertiary or Quaternary time, but most of the faults are the result of tectonic forces that were active during early and middle Tertiary time. These faults may or may not be related to the tectonic forces responsible for the current seismicity. Approximately 5 percent of the earthquakes recorded in the Puget Sound region originated at depths of 40 Km or more (Crosson, 1972, fig. 11), and these are probably not directly related to exposed or near-surface structures. Most of the earthquakes occur at shallower depths and may be associated with near-surface structures, but no earthquakes have been definitely identified with mapped faults.

Washington↗

Technical-information products for a National Volcano Early Warning System

Technical outreach — distinct from general-interest and K-12 educational outreach — for volcanic hazards is aimed at providing usable scientific information about potential or ongoing volcanic activity to public officials, businesses, and individuals in support of their response, preparedness, and mitigation efforts. Within the context of a National Volcano Early Warning System (NVEWS) (Ewert et al., 2005), technical outreach is a critical process, transferring the benefits of enhanced monitoring and hazards research to key constituents who have to initiate actions or make policy decisions to lessen the hazardous impact of volcanic activity. This report discusses recommendations of the Technical-Information Products Working Group convened in 2006 as part of the NVEWS planning process. The basic charge to the Working Group was to identify a web-based, volcanological "product line" for NVEWS to meet the specific hazard-information needs of technical users. Members of the Working Group were: Marianne Guffanti (Chair), USGS, Reston VA Steve Brantley, USGS, Hawaiian Volcano Observatory HI Peter Cervelli, USGS, Alaska Volcano Observatory, Anchorage AK Chris Nye, Division of Geological and Geophysical Surveys and Alaska Volcano Observatory, Fairbanks AK George Serafino, National Oceanic and Atmospheric Administration, Camp Springs MD Lee Siebert, Smithsonian Institution, Washington DC Dina Venezky, USGS, Volcano Hazards Team, Menlo Park CA Lisa Wald, USGS, Earthquake Hazards Program, Golden CO

Open-File Report↗

Biomonitoring of Environmental Status and Trends (BEST) Program: Environmental contaminants and their effects on fish in the Columbia River Basin

This project examined and analyzed 560 fish representing eight species from 16 sites in the Columbia River Basin (CRB) from September 1997 to April 1998. Ten of the 16 sampling locations were historical National Contaminant Biomonitoring Program (NCBP) sites where organochlorine and elemental contaminants in fish had been monitored from 1969 through 1986. Five sites were co-located at U.S. Geological Survey (USGS)-National Stream Quality Accounting Network (NASQAN) stations at which water quality is monitored. The sampling location at Marine Park in Vancouver, Washington did not correspond to either of the established monitoring programs. Eight of the sampling locations were located on the Columbia River; three were on the Snake River; two were on the Willamette River, and one site was on each of the Yakima, Salmon and Flathead Rivers. Common carp ( Cyprinus carpio ), black basses ( Micropterus sp. ), and largescale sucker ( Catostomus macrocheilus ) together accounted for 80% of the fish sampled during the study. Fish were weighed and measured then field-examined for external and internal lesions, and liver, spleen, and gonads were weighed to compute somatic indices. Selected tissues and fluids were obtained and preserved for analysis of fish health and reproductive biomarkers. Composite samples of whole fish from each station were grouped by species and gender and analyzed for persistent organic and inorganic contaminants and for dioxin-like activity using H4IIE rat hepatoma cell bioassay.

Columbia River Basin↗

Effects of urbanization on stream ecosystems in the Willamette River basin and surrounding area, Oregon and Washington

This report describes the effects of urbanization on physical, chemical, and biological characteristics of stream ecosystems in 28 watersheds along a gradient of urbanization in the Willamette River basin and surrounding area, Oregon and Washington, from 2003 through 2005. The study that generated the report is one of several urban-effects studies completed nationally by the U.S. Geological Survey National Water-Quality Assessment Program. Watersheds were selected to minimize natural variability caused by factors such as geology, elevation, and climate, and to maximize coverage of different stages of urban development among watersheds. Because land use or population density alone often are not a complete measure of urbanization, a combination of land use, land cover, infrastructure, and socioeconomic variables were integrated into a multimetric urban intensity index (UII) to represent the degree of urban development in each watershed. Physical characteristics studied include stream hydrology, stream temperature, and habitat; chemical characteristics studied include sulfate, chloride, nutrients, pesticides, dissolved and particulate organic and inorganic carbon, and suspended sediment; and biological characteristics studied include algal, macroinvertebrate, and fish assemblages. Semipermeable membrane devices, passive samplers that concentrate trace levels of hydrophobic organic contaminants such as polycyclic aromatic hydrocarbons and polychlorinated biphenyls, also were used. The objectives of the study were to (1) examine physical, chemical, and biological responses along the gradient of urbanization and (2) determine the major physical, chemical, and landscape variables affecting the structure of aquatic communities. Common effects documented in the literature of urbanization on instream physical, chemical, and biological characteristics, such as increased contaminants, increased streamflow flashiness, increased concentrations of chemicals, and changes in aquatic community structure toward a more tolerant community associated with organically enriched conditions, generally were observed in this study. The strongest correlations to the UII and to many of the algal, macroinvertebrate, and fish assemblage metrics and community ordination involved water-chemistry metrics including the total pesticide concentration, toxic equivalents (extract assay from semipermeable membrane devices), and dissolved oxygen. Hydrologic variability metrics, such as flashiness, that normally are considered to be one of the main processes of urban disturbance had a strong association to the algal and fish assemblages in this study; however, the hydrologic variables for macroinvertebrates were secondary to the water-chemistry metrics mentioned above. Generally, the high urban intensity sites had high abundances of eutrophic and lower dissolved oxygen-indicating diatoms, high abundances of noninsects and tolerant insects, and high abundances of nonnative fish species. On the other hand, the low urban intensity sites had higher abundances of pollution sensitive diatoms, larger numbers of the sensitive macroinvertebrate EPT taxa (Ephemeroptera, Plecoptera and Trichoptera Orders), and fish assemblages with higher abundances of sensitive salmonids. The percent salmonid and macroinvertebrate EPT richness metrics plotted against the UII indicated a possible threshold response at about 25 on the UII, which is equivalent to an impervious surface value of about 5 percent. However, due to the added agricultural land use at sites within the 25 to 60 UII range, this possible threshold probably is not solely due to urbanization, but a combination of urban and agricultural land use. The effects of agricultural and urban land use could not be distinguished from each other, yet combined they provide a good assessment of overall watershed disturbance.

Oregon, Washington↗