SEARCH · Geology Reports

Results for “Topographic Map”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52Linked to original sources

USGS2025

Topographic, climatic, and age controls on the reworking of volcanic debris avalanche deposits

Volcanic debris avalanches have deposited as much as 1000 km 3 of largely unconsolidated material on landscapes and remodeled existing drainage networks. The landscape disturbances created by these events pose severe, cascading downstream sedimentation hazards that can require long-term societal management, as demonstrated by decades of observations and ongoing interventions after the deposition of the 1980 debris avalanche of Mount St. Helens (United States). There, post-emplacement sediment yields caused by deposit erosion remain several times above estimated background yield and lakes impounded by the deposit still pose threats of downstream flooding. Despite the length and quality of measurements of the geomorphic evolution and consequent sediment release at Mount St. Helens, the long-term trajectory of drainage network evolution across, and the associated sediment release from, large volcanic debris avalanches remains uncertain. Observations and modeling at Mount St. Helens, however, indicate channel instability can persist many decades and may persist for centuries to millennia. We examined potential influences on the erosion and preservation of volcanic debris avalanche deposits (VDADs) by mapping valley networks developed on 89 VDADs selected from volcanic arcs across the world and spanning a variety of topographic settings and climate regimes. Using the best available topographic data (1 m lidar to 30 m radar-derived data depending on location) and aerial imagery, we estimated the areas of deposits that have been reworked relative to initial deposit footprints as a proxy for post-emplacement erosion. We found that a primary influence on reworking is the topographic confinement of the VDAD: confined, valley-filling deposits are systematically more reworked than unconfined deposits. There is no apparent relationship between deposit age and reworking for valley-filling deposits, indicating that drainage networks on deposits in confined topographic settings like at Mount St. Helens reform rapidly after emplacement. In contrast, our data indicate that the reworking of unconfined deposits has a monotonic positive relationship with age. This observation agrees with a conceptual model of channel formation at Mount Taranaki (New Zealand), which posits that an unconfined VDAD created a topographic high that initially (e.g., 2–8 ky for the Pungarehu formation at Taranaki) diverted erosion to the deposit margins. We found only a weak to moderate relationship between reworking and modern precipitation regimes, which may reflect differences between modern and paleo-precipitation conditions at many of our study sites. We also found no correlation between the size (surface area or volume) of deposits and the degree of reworking. The work presented here implies that downstream cascading sediment hazards from landscape-resetting processes like VDADs (such as thick, extensive pyroclastic flow deposits) depend on the relief and organization of the surrounding landscape.

Washington↗

USGS2016

Nature, distribution, and origin of Titan’s Undifferentiated Plains

The Undifferentiated Plains on Titan, first mapped by Lopes et al. (Lopes, R.M.C. et al., 2010. Icarus, 205, 540–588), are vast expanses of terrains that appear radar-dark and fairly uniform in Cassini Synthetic Aperture Radar (SAR) images. As a result, these terrains are often referred to as “blandlands”. While the interpretation of several other geologic units on Titan – such as dunes, lakes, and well-preserved impact craters – has been relatively straightforward, the origin of the Undifferentiated Plains has remained elusive. SAR images show that these “blandlands” are mostly found at mid-latitudes and appear relatively featureless at radar wavelengths, with no major topographic features. Their gradational boundaries and paucity of recognizable features in SAR data make geologic interpretation particularly challenging. We have mapped the distribution of these terrains using SAR swaths up to flyby T92 (July 2013), which cover >50% of Titan’s surface. We compared SAR images with other data sets where available, including topography derived from the SARTopo method and stereo DEMs, the response from RADAR radiometry, hyperspectral imaging data from Cassini’s Visual and Infrared Mapping Spectrometer (VIMS), and near infrared imaging from the Imaging Science Subsystem (ISS). We examined and evaluated different formation mechanisms, including (i) cryovolcanic origin, consisting of overlapping flows of low relief or (ii) sedimentary origins, resulting from fluvial/lacustrine or aeolian deposition, or accumulation of photolysis products created in the atmosphere. Our analysis indicates that the Undifferentiated Plains unit is consistent with a composition predominantly containing organic rather than icy materials and formed by depositional and/or sedimentary processes. We conclude that aeolian processes played a major part in the formation of the Undifferentiated Plains; however, other processes (fluvial, deposition of photolysis products) are likely to have contributed, possibly in differing proportions depending on location.

Icarus↗

USGS2009

High-Resolution Aeromagnetic Survey To Image Shallow Faults, Poncha Springs and Vicinity, Chaffee County, Colorado

High-resolution aeromagnetic data were acquired over the town of Poncha Springs and areas to the northwest to image faults, especially where they are concealed. Because this area has known hot springs, faults or fault intersections at depth can provide pathways for upward migration of geothermal fluids or concentrate fracturing that enhances permeability. Thus, mapping concealed faults provides a focus for follow-up geothermal studies. Fault interpretation was accomplished by synthesizing interpretative maps derived from several different analytical methods, along with preliminary depth estimates. Faults were interpreted along linear aeromagnetic anomalies and breaks in anomaly patterns. Many linear features correspond to topographic features, such as drainages. A few of these are inferred to be fault-related. The interpreted faults show an overall pattern of criss-crossing fault zones, some of which appear to step over where they cross. Faults mapped by geologists suggest similar crossing patterns in exposed rocks along the mountain front. In low-lying areas, interpreted faults show zones of west-northwest-, north-, and northwest-striking faults that cross ~3 km (~2 mi) west-northwest of the town of Poncha Springs. More easterly striking faults extend east from this juncture. The associated aeromagnetic anomalies are likely caused by magnetic contrasts associated with faulted sediments that are concealed less than 200 m (656 ft) below the valley floor. The faults may involve basement rocks at greater depth as well. A relatively shallow (<300 m or <984 ft), faulted basement block is indicated under basin-fill sediments just north of the hot springs and south of the town of Poncha Springs.

Open-File Report↗

USGS2019

Simulation of the regional groundwater-flow system in the St. Louis River basin, Minnesota

The St. Louis River Basin (SLRB) covers 3,600 square miles in northeastern Minnesota, with headwaters in the Mesabi Range and extensive wetlands and lakes throughout the basin. To better understand the regional groundwater system in the SLRB, a two-dimensional, steady-state groundwater-flow model of the SLRB was developed by the U.S. Geological Survey, in cooperation with the Minnesota Ojibwe Bands, using the analytic-element computer code GFLOW. The parameter-estimation software suite PEST was used to obtain a best fit of the modeled to measured groundwater levels and streamflows. The calibrated regional model was locally refined to create a smaller version of the model, the central SLRB model, that was used to evaluate hydrologic effects from extensive ditching in wetlands of the central SLRB. The refinements included adding ditches that were not represented in the regional model and modifying the aquifer base elevation to be more representative of the localized area. The central SLRB model was recalibrated to better match the distribution of mapped wetlands. Two scenarios were run of the central SLRB model: one with ditches and one without ditches. The model results were compared between the two scenarios to assess the effect of ditching on the groundwater system and potential changes to hydrologic conditions that support wetlands. Calibration of the regional SRLB model resulted in average horizontal hydraulic conductivity values of 6–39 feet per day for the glacial deposits and 3–4 feet per day for the uppermost fractured bedrock in the Biwabik Iron-Formation on the Mesabi Range. Average recharge across the calibrated model was 5.9 inches per year. Linesink resistance for the routed stream network was calibrated by using resistance categories based on the mapped soil hydrologic groups. The modeled regional groundwater-flow direction was generally to the south near the Mesabi Range topographic high and south or southwest across the rest of the basin. The updated calibration of the central SLRB model resulted in average horizontal hydraulic conductivity values of 5–36 feet per day for the glacial deposits and 3 feet per day for the uppermost fractured Biwabik Iron-Formation of the Mesabi Range. Average recharge across the ditch scenarios was 4.1 inches per year. Comparison of the preditch and postditch model scenarios showed that ditching reduced the area where the modeled water table was within 1 foot of the land surface (a wetland hydrology indicator) in as much as 40,000 acres, or 37 percent, of mapped permanent wetlands in the SLRB. An increase in the depth to the water table in wetland areas has the potential to degrade wetland persistence or function.

Minnesota↗

USGS2026

Vulnerability of different Colorado Plateau land types to drivers of change

Public lands are challenged by a range of pressures—changing climate, increasing visitation, resource extraction—and their effects can span spatial scales, often crossing land management jurisdictional boundaries. Research approaches which explicitly span jurisdictions can support strategies to contend with regional pressures. We assess management-relevant drivers of change—aridification, livestock grazing, invasive species, surface disturbance, and fire—across a patchwork of land management units and agencies on the Colorado Plateau, focusing on southeastern Utah, USA. We use vulnerability analysis, first evaluating exposure to drivers across the landscape, then quantifying sensitivity to each driver across different land types, defined by mapped Ecological Site Groups, a system for classifying landscapes according to physical factors including climate, soils, and topographic setting. We address the questions: 1) how are drivers spatially distributed across the study region; and, 2) based on exposure and sensitivity, are certain land types more vulnerable to these drivers? We find that the study region has high exposure and sensitivity—and thus high vulnerability—to aridification and grazing, but low exposure and vulnerability to other drivers. Although more sensitive land types were not generally more exposed, identifying which areas are most sensitive can guide adaptive measures, like where new uses or disturbances would be least harmful and which areas could be prioritized for restoration. The method we demonstrate is a flexible tool for assessing landscape-scale impacts, is built on nationally available datasets, and can be tailored to different datasets and sensitivity metrics.

Utah↗

USGS2011

Character of shell beds flanking Herod Point Shoal, southeastern Long Island Sound, New York

High biogenic productivity, strong tidal currents, shoal topography, and short transport distances combine to favor shell-bed formation along the lower flanks of a cape-associated shoal off Herod Point on Long Island, New York. This shell bed has a densely packed, clast-supported fabric composed largely of undegraded surf clam ( Spisula solidissima ) valves. It is widest along the central part of the western flank of the shoal where topographic gradients are steep and a stronger flood tide results in residual flow. The bed is narrower and thinner toward the landward margins where currents are too weak to transport larger valves and topographic gradients are gentle, limiting bed-load transport mechanisms by which the shells are concentrated. Reconnaissance mapping off Roanoke Point suggests that shell beds are also present at the other cape-associated shoals off northeastern Long Island, where relatively similar geomorphic and oceanographic conditions exist. These shell beds are important to the Long Island Sound ecosystem because they provide complex benthic habitats of rough and hard substrates at the boundary between the muddy basin floor and mobile sand of the shoals.

Connecticut, New York↗

USGS2010

Geologic map of the Artemis Chasma quadrangle (V-48), Venus

Artemis, named for the Greek goddess of the hunt, represents an approximately 2,600 km diameter circular feature on Venus, and it may represent the largest circular structure in our solar system. Artemis, which lies between the rugged highlands of Aphrodite Terra to the north and relatively smooth lowlands to the south, includes an interior topographic high surrounded by the 2,100-km-diameter, 25- to 200-km-wide, 1- to 2-km-deep circular trough, called Artemis Chasma, and an outer rise that grades outward into the surrounding lowland. Although several other chasmata exist in the area and globally, other chasmata have generally linear trends that lack the distinctive circular pattern of Artemis Chasma. The enigmatic nature of Artemis has perplexed researchers since Artemis Chasma was first identified in Pioneer Venus data. Although Venus' surface abounds with circular to quasi-circular features at a variety of scales, including from smallest to largest diameter features: small shield edifices (>1 km), large volcanic edifices (100-1,000 km), impact craters (1-270 km), coronae (60-1,010 km), volcanic rises and crustal plateaus (~1,500-2,500 km), Artemis defies classification into any of these groups. Artemis dwarfs Venus' largest impact crater, Mead (~280 km diameter); Artemis also lacks the basin topography, multiple ring structures, and central peak expected for large impact basins. Topographically, Artemis resembles some Venusian coronae; however Artemis is an order of magnitude larger than the average corona (200 km) and about twice the size of Heng-O Corona (which is 1,010 km in diameter), the largest of Venusian coronae. In map view Artemis' size and shape resemble volcanic rises and crustal plateaus; however, both of these classes of features differ topographically from Artemis. Volcanic rises and crustal plateaus form broad domical regions, and steep-sided regions with flat tops, respectively; furthermore, neither rises nor plateaus include circular troughs. So although it seems clear what Artemis is not, there is little consensus about what Artemis is, much less how Artemis formed. Debate during the past decade has resulted in the proposal of at least four hypotheses for Artemis' formation. The first (herein referred to as H1) is that Artemis Chasma represents a zone of northwest-directed convergence and subduction. The second hypothesis (herein referred to as H2) is that Artemis consists of a composite structure with a part of its interior region marking the exposure of deformed ductile deep-crustal rocks analogous to a terrestrial metamorphic core complex. The third (herein referred to as H3) is that Artemis reflects the surface expression of an ancient (>3.5 Ga) huge bolide impact event on cold strong lithosphere. The fourth hypothesis (herein referred to as H4) is that Artemis marks the surface expression of a deep mantle plume. Each of these hypotheses holds different implications for Venus geodynamics and evolution processes, and for terrestrial planet processes in general. Viability of H1 would provide support that terrestrial-like plate-tectonic processes once occurred on Earth's sister planet. The feasibility of H2 would require high values of crustal extension and therefore imply that significant horizontal displacements occurred on Venus-displacement that may or may not be related to terrestrial-like plate-tectonic processes. The possibility of H3 would suggest that Venus' surface is extremely old, and that Venus has experienced very little dynamic activity for the last 3.5 billion years or more; this would further imply that Venus is essentially tectonically dead, and has been for most of its history. This view contrasts strongly with studies that highlight a rich history of Venus including activity at least as young as 750 million years ago, and quite likely up to the present. If H4 has credibility, then Artemis could provide clues to cooling mechanisms of Earth's sister planet. Each of these hypotheses

Scientific Investigations Map↗

USGS2010

Shaded seafloor relief, backscatter strength, and surficial geology; German Bank, Scotian Shelf, offshore Nova Scotia

This map is part of a three-map series of German Bank, located on the Scotian Shelf off southern Nova Scotia. This map is the product of a number of surveys (1997-2003) that used a multibeam sonar system to map 5321 km 2 of the seafloor. Other surveys collected geological data for scientific interpretation. This map sheet shows the seafloor topography of German Bank in shaded-relief view and seafloor depth (coded by colour) at a scale of 1:1000,000. Topographic contours generated from the multibeam data are shown (in white) on the colour-coded multibeam topography at a depth interval of 20 m. Bathymetic contours (in blue) outside the multibeam survey area, presented at a depth interval of 10 m, are from the Natural Resource Map series (Canadian Hydrographic Service, 1967, 1971a, 1971b, 1972). Sheet 2 shows coloured backscatter strength in shaded-relief view. Sheet 3 shows seafloor topography in shaded-relief view with colour-coded surficial geological units.

Nova Scotia↗

USGS1974

Surficial geologic map of the Framingham quadrangle, Middlesex and Worcester Counties, Massachusetts

The Framingham quadrangle covers about 55 square miles and is centered approximately 18 miles west of Boston. Even though the major topographic features are controlled by the lithology and structure of the bedrock, glacial features, such as drumlins, kames and kettles, kame terraces, eskers, gently sloping deltas, and flat-lying lake-bottom deposits, have modified the preglacial topography. Some bedrock plucking occurred, especially on the south or southeast sides of some hills, and some valleys probably were deepened. A thin veneer of till overlies much of the bedrock and is most extensive in the hills in the western half of the map area. These deposits, which are mostly gently sloping kame deltas or flat-lying lake-bottom deposits, were laid down in or graded to glacial Lakes Charles (Clapp, 1904, p. 198) and Sudbury (Goldthwait, 1905, p. 274), which formed during deglaciation when melt waters were temporarily impounded. Some glacial-lake deposits were laid down in three smaller higher level lakes in the western part of the quadrangle. With the exception of a small part of the southeast corner, which is drained by the Charles River, the quadrangle is drained by the Sudbury River, whose waters eventually flow into the Merrimack River in the northeast part of the state.

Massachusetts↗

USGS1978

Discrimination of hydrothermally altered rocks along the Battle Mountain-Eureka, Nevada, mineral belt using Landsat images

Landsat Multispectral Scanner (MSS) images of the northwestern part of the Battle Mountain-Eureki, Nevada mineral belt were evaluated for distinguishing hydrothermally altered rocks associated with porphyry copper and disseminated gold deposits. Detection of altered rocks from Landsat is based on the distinctive spectral reflectance of limonite present at coatings on weathered surfaces Some altered rocks are visible as bleached areas in individual MSS bands; however, they cannot be consistently distinguished from unaltered rocks with high albedo nor from bright areas resulting .from topographic slope. Black-and-white ratio images were generated to subdue .topographic effects, and three ratio images were composited in color to portray spectral radiance differences, forming an image known as a color-ratio composite (CRC). The optimum CRC image for this area has MSS 4/5 as blue, MSS 4/6 as yellow, and MSS 6/7 as magenta, and differs in two respects from most CRC images of arid areas. First, as a result of the increased vegetation cover in the study area, MSS 5/6 was replaced by MSS 4/6 as the yellow layer. Second, 70 mm positive transparencies were replaced by large format images (64 cm), thereby improving the internal registration of the CRC image and the effective spatial resolution. The pattern of limonitic rocks depicted in the CRC closely agrees with the mapped pattern of the alteration zones at the Copper Canyon and Copper Basin porphyry copper deposits. Certain west-facing topographic slopes in the altered areas are depicted as unaltered in the CRC, apparently due to atmospheric scattering, and illustrate the need for atmospheric correction. The disseminated gold deposits at Gold Acres and Tenabo are poorly represented in the CRC because of the general absence of limonite on these deposits. The presence of unaltered limonitic sedimentary and volcanic rocks is the largest obstacle to discriminating altered areas within the mineral belt. Reflectance spectra, made in situ and in the laboratory indicate differences between altered and unaltered rocks in the Spectra region between 1.1 ?m and 2.5 ?m. Such differences may be detectable by a remote scanner with a longer wavelength range than current Landsat MSS (0.6 ?m-1.1 ?m).

Open-File Report↗

USGS1969

Geochemistry and hydrodynamics of the Paradox Basin region, Utah, Colorado and New Mexico

The Paradox Basin region is approximately bounded by the south flank of the Uinta Basin to the north, the Uncompahgre uplift and San Juan Mountains to the east, the Four Corners structural platform to the southeast, the north rim of the Black Mesa Basin and the Grand Canyon to the south and southwest, and the Wasatch Plateau and Hurricane fault system to the west. Some of these geologic features are areas of ground-water recharge or discharge whereas others such as the Four Corners platform do not directly influence fluid movement. The aquifer systems studied were: (1) Mississippian rocks; (2) Pinkerton Trail Limestone of Wengerd and Strickland, 1954; (3) Paradox Member of the Hermosa Formation; (4) Honaker Trail Formation of Wengerd and Matheny, 1958; (5) Permian rocks. Recharge in the Paradox Basin occurs on the west flank of the San Juan Mountains and along the west side of the Uncompahgre uplift. The direction of ground-water movement in each analyzed unit is principally southwest-ward toward the topographically low outcrop areas along the Colorado River in Arizona. However, at any point in the basin, flow may be in some other direction owing to the influence of intrabasin recharge areas or local obstructions to flow, such as faults or dikes. A series of potentiometric surface maps was prepared for the five systems studied. Material used in construction of the maps included outcrop altitudes of springs and streams, drill-stem tests, water-well records, and an electric analog model of the entire basin. Many structurally and topographically high areas within the basin are above the regional potentiometric surface; recharge in these areas will drain rapidly off the high areas and adjust to the regional water level. With a few exceptions, most wells in formations above the Pennsylvanian contain fresh (< 1,000 mg/l T.D.S. 2 ) to moderately saline (< 10,000 mg/l T.D.S.) water. In only a few cases are true brines (> 35,000 mg/l T.D.S.) reported. Most water samples from strata below the Permian are brines of the sodium chloride type but with large amounts of calcium sulfate or calcium chloride type water commonly occurring. Because evaporite facies occur in the Paradox Member, this unit has brines with as much as 400,000 mg/l dissolved solids content. Previous analysis of the San Juan Basin has indicated the presence of an osmotic membrane system. The highly permeable Jurassic formations were postulated to be the outflow side of the membrane. It is also possible that the Upper Paleozoic units with known brines and with an otherwise inexplicably high potentiometric surface in the Four Corners area of New Mexico could be the outflow receptors of the San Juan membrane system.

Colorado, New Mexico, Utah↗

USGS2009

Geologic map of northeastern Seattle (part of the Seattle North 7.5' x 15' quadrangle), King County, Washington

This geologic map, approximately coincident with the east half of the Seattle North 7.5 x 15’ quadrangle (herein, informally called the “Seattle NE map”), covers nearly half of the City of Seattle and reaches from Lake Washington across to the Puget Sound shoreline. Land uses are mainly residential, but extensive commercial districts are located in the Northgate neighborhood, adjacent to the University of Washington, and along the corridors of Aurora Avenue North and Lake City Way. Industrial activity is concentrated along the Lake Washington Ship Canal and around Lake Union. One small piece of land outside of the quadrangle boundaries, at the west edge of the Bellevue North quadrangle, is included on this map for geographic continuity. Conversely, a small area in the northeast corner of the Seattle North quadrangle, on the eastside of Lake Washington, is excluded from this map. Within the boundaries of the map area are two large urban lakes, including the most heavily visited park in the State of Washington (Green Lake Park); a stream (Thornton Creek) that still hosts anadromous salmon despite having its headwaters in a golfcourse and a shopping center; parts of three cities, with a combined residential population of about 300,000 people; and the region’s premier research institution, the University of Washington. The north boundary of the map is roughly NE 168th Street in the cities of Shoreline and Lake Forest Park, and the south boundary corresponds to Mercer Street in Seattle. The west boundary is 15th Avenue W (and NW), and the east boundary is formed by Lake Washington. Elevations range from sea level to a maximum of 165 m (541 ft), the latter on a broad till-covered knob in the city of Shoreline near the northwest corner of the map. Previous geologic maps of this area include those of Waldron and others (1962), Galster and Laprade (1991), and Yount and others (1993). Seattle lies within the Puget Lowland, an elongate structural and topographic basin between the Cascade Range and Olympic Mountains. The Seattle area has been glaciated repeatedly during the past two million years by coalescing glaciers that advanced southward from British Columbia. The landscape we see today was molded by cyclic glacial scouring and deposition and later modified by landsliding and stream erosion. The last ice sheet reached the central Puget Sound region about 14,500 years ago, as measured by 14 C dating, and it had retreated from this area by 13,650 14 C yr B.P. (equivalent calendar years are about 17,600 and 16,600 years ago; Porter and Swanson, 1998). Seattle now sits atop a complex and incomplete succession of interleaved glacial and nonglacial deposits that overlie an irregular bedrock surface. These glacial and nonglacial deposits vary laterally in both texture and thickness, and they contain many local unconformities. In addition, they have been deformed by faults and folds, at least as recently as 1,100 years ago, and this deformation further complicates the geologic record. The landforms and near-surface deposits that cover much of the Seattle NE map area record a relatively brief, recent interval of the region’s geologic history. The topography is dominated in the north by a broad, fluted, and south-sloping upland plateau, which gives way to a more complex set of elongated hills in the map’s southern half. The valleys of Pipers Creek, Green Lake, and Thornton Creek mark the transition between these two topographic areas. Most of the uplands are mantled by a rolling surface of sand (unit Qva) and till (unit Qvt) deposited during the last occupation of the Puget Lowland by a continental ice sheet. Beneath these ice sheet deposits is a complex succession of older sediments that extends far below sea level across most of the map area. These older sediments are now locally exposed where modern erosion and landslides have sliced through the edge of the upland, and where subglacial processes apparently left these older sediments largely free of overlying sediments. Lack of overlying sediments is particularly evident on the hillslopes above Thornton Creek, adjacent to Lake Washington, and on the flanks of Capitol Hill.

Washington↗

USGS2003

The Long Valley Caldera GIS database

This database provides an overview of the studies being conducted by the Long Valley Observatory in eastern California from 1975 to 2001. The database includes geologic, monitoring, and topographic datasets related to Long Valley caldera. The CD-ROM contains a scan of the original geologic map of the Long Valley region by R. Bailey. Real-time data of the current activity of the caldera (including earthquakes, ground deformation and the release of volcanic gas), information about volcanic hazards and the USGS response plan are available online at the Long Valley observatory web page (http://lvo.wr.usgs.gov). If you have any comments or questions about this database, please contact the Scientist in Charge of the Long Valley observatory.

Data Series↗

USGS2000

Basement structure beneath Langford Well Lake basin, Fort Irwin, California, based on inversion of gravity data

Gravity data were used to study the basement structure of Langford Well Lake basin at the U.S. Army National Training Center, Fort Irwin, California. Figure 1 shows the location of the study area. During 1996 and 1999, 290 new gravity stations were measured. These data were merged with existing data to produce a depth-to-basement map, which, in turn was converted to a structure map of the basement surface below alluvial fill. This information can be used to help interpret water flow and reservoir capacity of the basin. In addition, gravity gradients were used to suggest locations of faults through or below alluvial fill. These gradients may be evidence for repositioning or extending mapped faults. The locations of gravity stations are shown in figure 2 plotted on a colored grid of topographic elevations generated from 30 m DEM's (Digital Elevation Models). As shown by figure 3, gravity data used in this study are sufficiently accurate to permit 1-mGal contour intervals. Much of the older regional data in this study area are of lesser quality although they were included because they sufficiently represent regional gravity.

California↗

USGS2006

Calibrated Landsat ETM+ nonthermal-band image mosaics of Afghanistan

In 2005, the U.S. Agency for International Development and the U.S. Trade and Development Agency contracted with the U.S. Geological Survey to perform assessments of the natural resources within Afghanistan. The assessments concentrate on the resources that are related to the economic development of that country. Therefore, assessments were initiated in oil and gas, coal, mineral resources, water resources, and earthquake hazards. All of these assessments require geologic, structural, and topographic information throughout the country at a finer scale and better accuracy than that provided by the existing maps, which were published in the 1970s by the Russians and Germans. The very rugged terrain in Afghanistan, the large scale of these assessments, and the terrorist threat in Afghanistan indicated that the best approach to provide the preliminary assessments was to use remotely sensed, satellite image data, although this may also apply to subsequent phases of the assessments. Therefore, the first step in the assessment process was to produce satellite image mosaics of Afghanistan that would be useful for these assessments. This report discusses the production and characteristics of the fundamental satellite image databases produced for these assessments, which are calibrated image mosaics of all six Landsat nonthermal (reflected) bands.

Open-File Report↗

USGS2007

Landsat ETM+ False-Color Image Mosaics of Afghanistan

In 2005, the U.S. Agency for International Development and the U.S. Trade and Development Agency contracted with the U.S. Geological Survey to perform assessments of the natural resources within Afghanistan. The assessments concentrate on the resources that are related to the economic development of that country. Therefore, assessments were initiated in oil and gas, coal, mineral resources, water resources, and earthquake hazards. All of these assessments require geologic, structural, and topographic information throughout the country at a finer scale and better accuracy than that provided by the existing maps, which were published in the 1970's by the Russians and Germans. The very rugged terrain in Afghanistan, the large scale of these assessments, and the terrorist threat in Afghanistan indicated that the best approach to provide the preliminary assessments was to use remotely sensed, satellite image data, although this may also apply to subsequent phases of the assessments. Therefore, the first step in the assessment process was to produce satellite image mosaics of Afghanistan that would be useful for these assessments. This report discusses the production of the Landsat false-color image database produced for these assessments, which was produced from the calibrated Landsat ETM+ image mosaics described by Davis (2006).

Open-File Report↗

USGS1983

U. S. GEOLOGICAL SURVEY LAND REMOTE SENSING ACTIVITIES.

USGS uses all types of remotely sensed data, in combination with other sources of data, to support geologic analyses, hydrologic assessments, land cover mapping, image mapping, and applications research. Survey scientists use all types of remotely sensed data with ground verifications and digital topographic and cartographic data. A considerable amount of research is being done by Survey scientists on developing automated geographic information systems that can handle a wide variety of digital data. The Survey is also investigating the use of microprocessor computer systems for accessing, displaying, and analyzing digital data.

Conference Paper↗

USGS1991

Ground-water recharge from streamflow data, NW Florida

Annual base flows of streams draining Okaloosa County and adjacent areas in northwest Florida were determined through hydrograph separation and correlation techniques for purposes of evaluating variations in ground-water recharge rates. Base flows were least in the northern part of the county and greatest in the southern part. Topographic and soils data were then superimposed on the distribution of base flow by subbasin to produce a map showing distribution of ground-water recharge throughout the county. The highest recharge rate occurs in the southern part of the county where relatively flat upland areas underlain by excessively drained sandy soils result in minimal storm runoff and evapotranspiration.

Conference Paper↗