SEARCH · Geology Reports

Results for “Scientific Data - Nature”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52Linked to original sources

USGS2005

Quality of nutrient data from streams and ground water sampled during water years 1992-2001

Proper interpretation of water-quality data requires consideration of the effects that bias and variability might have on measured constituent concentrations. In this report, methods are described to estimate the bias due to contamination of samples in the field or laboratory and the variability due to sample collection, processing, shipment, and analysis. Contamination can adversely affect interpretation of measured concentrations in comparison to standards or criteria. Variability can affect interpretation of small differences between individual measurements or mean concentrations. Contamination and variability are determined for nutrient data from quality-control samples (field blanks and replicates) collected as part of the National Water-Quality Assessment (NAWQA) Program during water years 1992-2001. Statistical methods are used to estimate the likelihood of contamination and variability in all samples. Results are presented for five nutrient analytes from stream samples and four nutrient analytes from ground-water samples. Ammonia contamination can add at least 0.04 milligram per liter in up to 5 percent of all samples. This could account for more than 22 percent of measured concentrations at the low range of aquatic-life criteria (0.18 milligram per liter). Orthophosphate contamination, at least 0.019 milligram per liter in up to 5 percent of all samples, could account for more than 38 percent of measured concentrations at the limit to avoid eutrophication (0.05 milligram per liter). Nitrite-plus-nitrate and Kjeldahl nitrogen contamination is less than 0.4 milligram per liter in 99 percent of all samples; thus there is no significant effect on measured concentrations of environmental significance. Sampling variability has little or no effect on reported concentrations of ammonia, nitrite-plus-nitrate, orthophosphate, or total phosphorus sampled after 1998. The potential errors due to sampling variability are greater for the Kjeldahl nitrogen analytes and for total phosphorus sampled before 1999. The uncertainty in a mean of 10 concentrations caused by sampling variability is within a small range (1 to 7 percent) for all nutrients. These results can be applied to interpretation of environmental data collected during water years 1992-2001 in 52 NAWQA study units.

Scientific Investigations Report↗

USGS2006

Synthesis of monthly and annual streamflow records (water years 1950-2003) for Big Sandy, Clear, Peoples, and Beaver Creeks in the Milk River basin, Montana

To address concerns expressed by the State of Montana about the apportionment of water in the St. Mary and Milk River basins between Canada and the United States, the International Joint Commission requested information from the United States government about water that originates in the United States but does not cross the border into Canada. In response to this request, the U.S. Geological Survey synthesized monthly and annual streamflow records for Big Sandy, Clear, Peoples, and Beaver Creeks, all of which are in the Milk River basin in Montana, for water years 1950-2003. This report presents the synthesized values of monthly and annual streamflow for Big Sandy, Clear, Peoples, and Beaver Creeks in Montana. Synthesized values were derived from recorded and estimated streamflows. Statistics, including long-term medians and averages and flows for various exceedance probabilities, were computed from the synthesized data. Beaver Creek had the largest median annual discharge (19,490 acre-feet), and Clear Creek had the smallest median annual discharge (6,680 acre-feet). Big Sandy Creek, the stream with the largest drainage area, had the second smallest median annual discharge (9,640 acre-feet), whereas Peoples Creek, the stream with the second smallest drainage area, had the second largest median annual discharge (11,700 acre-feet). The combined median annual discharge for the four streams was 45,400 acre-feet. The largest combined median monthly discharge for the four creeks was 6,930 acre-feet in March, and the smallest combined median monthly discharge was 48 acre-feet in January. The combined median monthly values were substantially smaller than the average monthly values. Overall, synthesized flow records for the four creeks are considered to be reasonable given the prevailing climatic conditions in the region during the 1950-2003 base period. Individual estimates of monthly streamflow may have large errors, however. Linear regression was used to relate logarithms of combined annual streamflow to water years 1950-2003. The results of the regression analysis indicated a significant downward trend (regression line slope was -0.00977) for combined annual streamflow. A regression analysis using data from 1956-2003 indicated a slight, but not significant, downward trend for combined annual streamflow.

Scientific Investigations Report↗

USGS2005

Water-quality assessment of Lake Houston near Houston, Texas, 2000-2004

Lake Houston is a major source of public water supply and recreational resource for the Houston metropolitan area, Texas. Water-quality issues of potential concern for the lake have included nutrient enrichment (orthophosphorus, total phosphorus, nitrite plus nitrate) and aquatic life use (dissolved oxygen). The , in cooperation with the City of Houston, collected water samples from three sites in Lake Houston and from two streams that discharge to the lake during 2000–2004. Nitrogen compounds, phosphorus, suspended sediment, organic carbon, turbidity, chlorophyll-a, and selected pesticide compounds in water were assessed for all sites. Waterquality conditions of the lake and inflow streams were assessed, and loads and yields were computed for selected constituents in the streams. Selected constituents from samples collected in Lake Houston during 1990–2004 were tested for trends. The three sites sampled in Lake Houston characterized water available to the City of Houston pumping station (site AC), water entering the lake from the largely rural eastern subbasin (site EC), and water entering the lake from the more urbanized, western subbasin (site FC). Most constituent concentrations were largest at site FC, smallest at site EC, and intermediate at site AC. Organic nitrogen was the dominant form of nitrogen in samples collected at all sites. Nitrite plus nitrate concentrations were largest at site FC. Total phosphorus concentrations in all samples were larger than that recommended by the U.S. Environmental Protection Agency to limit aquatic growth in reservoirs. There was a wide range in suspended-sediment concentrations and turbidity in the lake. Twelve pesticides were detected. Atrazine and its breakdown product, 2-chloro-4-isopropylamino-6-amino-s-triazine (CIAT), were the most commonly detected pesticides; concentrations of atrazine were larger than the U.S. Environmental Protection Agency maximum contaminant level of 3.0 micrograms per liter in two samples at site FC. The relative contributions to the water quality of Lake Houston from the eastern and western subbasins were examined by collecting water samples in Cypress Creek and East Fork San Jacinto River. Nitrate and pesticide concentrations were larger in Cypress Creek than in East Fork San Jacinto River. In Cypress Creek, nitrate was the primary form of nitrogen at low flows. Atrazine exceeded 3.0 micrograms per liter in three of 17 samples, with the maximum measured concentration of 21.3 micrograms per liter. In East Fork San Jacinto River, organic nitrogen was the primary form of nitrogen. Atrazine was detected in six of 15 samples. The maximum atrazine concentration was 0.233 microgram per liter. Constituent yields allowed direct comparison of loads from Cypress Creek and East Fork San Jacinto River. In Cypress Creek, storm yields of nitrite plus nitrate nitrogen for high flows ranged from 8 to 45 pounds per square mile per day; in East Fork San Jacinto River, the maximum storm yield for high flows was 1.47 pounds per square mile per day. At low flows, the median daily yield of dissolved phosphorus from Cypress Creek was 84 times larger than the median daily yield from East Fork San Jacinto River; at high flows, it was 16 times larger. At high flows, the maximum daily yield of atrazine from Cypress Creek was 460 times larger than the maximum daily yield at high flows from East Fork San Jacinto River. The concentrations of most constituents at Lake Houston sites showed no trend during 1990–2004; however, significant trends overall or for particular seasons, or both, were detected at some sites for nitrite plus nitrate, dissolved phosphorus, dissolved organic carbon, chlorophyll-a, and diazinon (2000–2004 data only for diazinon).

Texas↗

USGS2006

Apparent Consumption vs. Total Consumption--A Lead-Acid Battery Case Study

Introduction: This report compares estimates of U.S. apparent consumption of lead with estimates of total U.S. consumption of this mineral commodity from a materials flow perspective. The difference, attributed to the amount of lead contained in imported and exported products, was found to be significant for this sector. The study also assesses the effects of including mineral commodities incorporated in manufactured products on the interpretation of observed trends in minerals consumption and trade. Materials flow is a systems approach to understanding what happens to the materials we use from the time a material is extracted, through its processing and manufacturing, to its ultimate disposition. The U.S. Geological Survey (USGS) provides accurate and detailed mineral production and mineral commodity consumption statistics that are essential for government, nongovernment organizations, and the public to gain a better understanding of how and where materials are used and their effect on the environment and society. Published statistics on mineral apparent consumption are limited to estimates of consumption of raw material forms (ore, concentrate, and [or] refined metal). For this study, apparent consumption is defined as mine production + secondary refined production + imports (concentrates and refined metal) ? exports (concentrates and refined metal) + adjustments for government and industry stock changes. These estimates do not account for the amount of mineral commodities contained in manufactured products that are imported to the United States, nor do they deduct the amount of these mineral commodities contained in manufactured products that are exported from the United States. When imports or exports of manufactured products contribute significantly to the total use of a particular raw material, an estimate of consumption that does not consider the incorporated forms of these mineral commodities within imported or exported manufactured products can be either under- or overreported (depending on the net trade flow). Factors that influence consumption and trade patterns include variations in industry structure, labor or financial markets, legislation, and technology. As U.S. trade patterns of manufactured products change, omitting mineral commodities incorporated into these goods as part of U.S. mineral commodity consumption estimates may affect the interpretation of observed trends in minerals consumption and trade. Although it may be desirable to include minerals contained in manufactured products as part of consumption estimates, collection and estimation of these data are sometimes difficult. Consumption and trade data for every traded product may not be readily available. Compiling comprehensive consumption statistics for mineral commodities, which have many end uses, each including multiple products, may be time consuming. For these reasons, studies of all mineral commodities are not feasible. Mineral commodity selection for this study is based on data accessibility considerations and the relative importance of lead contained in imported and exported products when considered part of total U.S. lead consumption. Lead was selected for this initial evaluation of total mineral consumption because of the need to understand the consumption pattern of this potentially toxic metal and its compounds, the relative simplicity of this sector?s end-use structure, and the availability of trade data. This study draws upon the findings of an earlier lead consumption study (Biviano and others, 1999) conducted by the USGS for the period 1984 to 1993, but uses a different study methodology for an industry whose structure has changed from that considered in the earlier study. Figure 1 shows the quantity of material contributing to U.S. total consumption of lead metal from domestic and foreign industrial sectors in 2004, based upon trade data reported by the USGS and the U.S. International Trade Commission (USITC). For

Scientific Investigations Report↗

USGS2008

Sedimentation and occurrence and trends of selected nutrients, other chemical constituents, and diatoms in bottom sediment, Fall River Lake, southeast Kansas, 1948-2006

A combination of available bathymetric-survey information and bottom-sediment coring was used to investigate sedimentation and the occurrence of selected nutrients (total nitrogen and total phosphorus), organic and total carbon, 25 trace elements, diatoms, and the radionuclide cesium-137 in the bottom sediment of Fall River Lake, southeast Kansas. The total estimated volume and mass of bottom sediment deposited from 1948 through 2006 in the original conservation pool of the reservoir was 470 million cubic feet and 18.8 billion pounds, respectively. The estimated sediment volume occupied about 36 percent of the original conservation-pool, water-storage capacity of the reservoir. Mean annual net sediment deposition since 1948 in the original conservation pool of the reservoir was estimated to be 324 million pounds per year. Mean annual net sediment yield from the Fall River Lake Basin was estimated to be 585,000 pounds per square mile per year. The mean annual net loads of total nitrogen and total phosphorus deposited in the bottom sediment of Fall River Lake were estimated to be 648,000 pounds per year and 267,000 pounds per year, respectively. The estimated mean annual net yields of total nitrogen and total phosphorus from the Fall River Lake Basin were 1,170 pounds per square mile per year and 480 pounds per square mile per year, respectively. Throughout the history of Fall River Lake, total nitrogen and total phosphorus concentrations in the deposited sediment were relatively uniform. Trace element concentrations in the bottom sediment of Fall River Lake generally were uniform over time. Arsenic, chromium, nickel, and zinc concentrations typically exceeded the threshold-effects guidelines, which represent the concentrations above which toxic biological effects occasionally occur. Trace element concentrations did not exceed the probable-effects guidelines (available for eight trace elements), which represent the concentrations above which toxic biological effects usually or frequently occur. Diatom occurrence in the bottom sediment of Fall River Lake was dominated by the species Aulacoseira granulata , which is an indicator of eutrophic (nutrient-rich) conditions. The abundance of the diatom Aulacoseira granulata , combined with cyanobacteria evidence and historical water-quality data, indicated that Fall River Lake likely has been eutrophic throughout much of its history.

Kansas↗

USGS2009

Processing, Analysis, and General Evaluation of Well-Driller Logs for Estimating Hydrogeologic Parameters of the Glacial Sediments in a Ground-Water Flow Model of the Lake Michigan Basin

In 2005, the U.S. Geological Survey began a pilot study for the National Assessment of Water Availability and Use Program to assess the availability of water and water use in the Great Lakes Basin. Part of the study involves constructing a ground-water flow model for the Lake Michigan part of the Basin. Most ground-water flow occurs in the glacial sediments above the bedrock formations; therefore, adequate representation by the model of the horizontal and vertical hydraulic conductivity of the glacial sediments is important to the accuracy of model simulations. This work processed and analyzed well records to provide the hydrogeologic parameters of horizontal and vertical hydraulic conductivity and ground-water levels for the model layers used to simulated ground-water flow in the glacial sediments. The methods used to convert (1) lithology descriptions into assumed values of horizontal and vertical hydraulic conductivity for entire model layers, (2) aquifer-test data into point values of horizontal hydraulic conductivity, and (3) static water levels into water-level calibration data are presented. A large data set of about 458,000 well driller well logs for monitoring, observation, and water wells was available from three statewide electronic data bases to characterize hydrogeologic parameters. More than 1.8 million records of lithology from the well logs were used to create a lithologic-based representation of horizontal and vertical hydraulic conductivity of the glacial sediments. Specific-capacity data from about 292,000 well logs were converted into horizontal hydraulic conductivity values to determine specific values of horizontal hydraulic conductivity and its aerial variation. About 396,000 well logs contained data on ground-water levels that were assembled into a water-level calibration data set. A lithology-based distribution of hydraulic conductivity was created by use of a computer program to convert well-log lithology descriptions into aquifer or nonaquifer categories and to calculate equivalent horizontal and vertical hydraulic conductivities (K and KZ, respectively) for each of the glacial layers of the model. The K was based on an assumed value of 100 ft/d (feet per day) for aquifer materials and 1 ft/d for nonaquifer materials, whereas the equivalent KZ was based on an assumed value of 10 ft/d for aquifer materials and 0.001 ft/d for nonaquifer materials. These values were assumed for convenience to determine a relative contrast between aquifer and nonaquifer materials. The point values of K and KZ from wells that penetrate at least 50 percent of a model layer were interpolated into a grid of values. The K distribution was based on an inverse distance weighting equation that used an exponent of 2. The KZ distribution used inverse distance weighting with an exponent of 4 to represent the abrupt change in KZ that commonly occurs between aquifer and nonaquifer materials. The values of equivalent hydraulic conductivity for aquifer sediments needed to be adjusted to actual values in the study area for the ground-water flow modeling. The specific-capacity data (discharge, drawdown, and time data) from the well logs were input to a modified version of the Theis equation to calculate specific capacity based horizontal hydraulic conductivity values (KSC). The KSC values were used as a guide for adjusting the assumed value of 100 ft/d for aquifer deposits to actual values used in the model. Water levels from well logs were processed to improve reliability of water levels for comparison to simulated water levels in a model layer during model calibration. Water levels were interpolated by kriging to determine a composite water-level surface. The difference between the kriged surface and individual water levels was used to identify outlier water levels. Examination of the well-log lithology data in map form revealed that the data were not only useful for model input, but also were useful for understanding th

Scientific Investigations Report↗

USGS2009

Analysis of Dissolved Selenium Loading from Surface Water and Groundwater to Sweitzer Lake, Colorado, 2006-07

Elevated selenium concentrations in streams are a water-quality concern in western Colorado. Sweitzer Lake was placed on the State 303(d) list as impaired with respect to dissolved selenium. In Colorado, the Water Quality Control Division of the Colorado Department of Public Health and Environment is required to develop total maximum daily loads of selenium for the 303(d) list segments. The U.S. Geological survey, in cooperation with the Colorado Department of Public Health and Environment, summarized selenium loading from surface water and ground water to Sweitzer Lake to support the total maximum daily loads development process. Surface-water and groundwater data were collected to quantify selenium concentrations and loads to Sweitzer Lake from October 2006 to October 2007. These data were used to determine the amount of selenium load (pounds annually) that would need to be reduced for the contributing sources (surface water and groundwater) to meet the State chronic aquatic-life standard of 4.6 micrograms per liter for dissolved selenium, herein referred to as 'a load reduction.' Selenium concentration data were also compared to the State acute aquatic-life standard of 18.4 micrograms per liter for dissolved selenium. Both surface-water and groundwater-quality samples collected during this study were found to exceed the chronic standard. Surface-water quantity and quality data were collected at Garnet Canal Diversion and Diversion Drain. Groundwater flux data were collected at 10 seepage-meter sires in Sweitzer Lake, and groundwater-quality data were collected at a groundwater seep and inferred from a January 2007 sample collected at Garnet Canal Diversion. Selenium concentrations and loads were greater at Garnet Canal Diversion than those observed at Diversion Drain. Approximately one-third of Garnet Canal Diversion-s Streamflow originates from Loutzenhizer Arroyo. Selenium concentrations observed during previous studies at Loutzenhizer Arroyo indicate high selenium concentrations and high selenium loads. All selenium concentrations in samples from Garnet Canal Diversion were greater than the chronic standard and were less that the acute standard during the irrigation season. Seventy-three percent of the annual selenium load at Garnet Canal Diversion would need to be reduced in order to meet the chronic standard. All daily mean selenium concentrations and selenium-concentration samples were greater than the chronic standard at Diversion Drain, but less than the acute standard during the irrigation season. Forty percent of the mean annual selenium loads at Diversion Drain would need to be reduced in order to meet the chronic standard. Estimated groundwater selenium loads and reductions of selenium loads to Sweitzer Lake were estimated using ranges of lake-bottom areas with positive groundwater flux and groundwater selenium concentrations. Estimated annual groundwater selenium load reductions ranged from 0.900 pound of the 1.17 pounds of annual load to 86.3 points of the 88.3 pounds of annual load for the selenium concentration scenarios over the range of lake-bottom areas. Groundwater selenium load and load reductions determined from this study identify the probably minimum and maximum values for these parameters. Further data collection and analysis could refine the range of groundwater selenium loads and load reductions.

Scientific Investigations Report↗

USGS2012

Groundwater monitoring plan for the Missouri River alluvial aquifer in the vicinity of the City of Independence, Missouri, well field

Source contributions to monitoring and supply wells, contributing recharge areas, groundwater travel times, and current (2012) understanding of alluvial water quality were used to develop a groundwater monitoring plan for the Missouri River alluvial aquifer in the vicinity of the City of Independence, Missouri well field. The plan was designed to evaluate long-term alluvial water quality and assess potential changes in, and threats to, well-field water quality. Source contributions were determined from an existing groundwater flow model in conjunction with particle-tracking analysis and verified with water-quality data collected from 1997 through 2010 from a network of 68 monitoring wells. Three conjunctive factors - well-field pumpage, Missouri River discharge, and aquifer recharge - largely determined groundwater flow and, therefore, source contributions. The predominant source of groundwater to most monitoring wells and supply wells is the Missouri River, and this was reflected, to some extent, in alluvial water quality. To provide an estimate of the maximum potential lead time available for remedial action, monitoring wells where groundwater travel times from the contributing recharge areas are less than 2 years and predominately singular sources (such as the Missouri River or the land surface) were selected for annual sampling. The sample interval of the remaining wells, which have varying travel times and intermediate mixtures of river and land-surface contributions, were staggered on a 2-, 3-, or 4-year rotation. This was done to provide data from similar contributing areas and account for inherent aquifer variability yet minimize sample redundancy.

Missouri↗

USGS2013

Prediction of suspended-sediment concentrations at selected sites in the Fountain Creek watershed, Colorado, 2008-09

In 2008, the U.S. Geological Survey (USGS), in cooperation with Pikes Peak Area Council of Governments, Colorado Water Conservation Board, Colorado Springs City Engineering, and the Lower Arkansas Valley Water Conservancy District, began a small-scale pilot study to evaluate the effectiveness of the use of a computational model of streamflow and suspended-sediment transport for predicting suspended-sediment concentrations and loads in the Fountain Creek watershed in Colorado. Increased erosion and sedimentation damage have been identified by the Fountain Creek Watershed Plan as key problems within the watershed. A recommendation in the Fountain Creek Watershed plan for management of the basin is to establish measurable criteria to determine if progress in reducing erosion and sedimentation damage is being made. The major objective of this study was to test a computational method to predict local suspended-sediment loads at two sites with different geomorphic characteristics in order to evaluate the feasibility of using such an approach to predict local suspended-sediment loads throughout the entire watershed. Detailed topographic surveys, particle-size data, and suspended-sediment samples were collected at two gaged sites: Monument Creek above Woodmen Road at Colorado Springs, Colorado (USGS gage 07103970), and Sand Creek above mouth at Colorado Springs, Colorado (USGS gage 07105600). These data were used to construct three-dimensional computational models of relatively short channel reaches at each site. The streamflow component of these models predicted a spatially distributed field of water-surface elevation, water velocity, and bed shear stress for a range of stream discharges. Using the model predictions, along with measured particle sizes, the sediment-transport component of the model predicted the suspended-sediment concentration throughout the reach of interest. These computed concentrations were used with predicted flow patterns and channel morphology to determine fluxes of suspended sediment for the median particle size and for the measured range of particle sizes in the channel. Three different techniques were investigated for making the suspended-sediment predictions; these techniques have varying degrees of reliance on measured data and also have greatly differing degrees of complexity. Based on these data, the calibrated Rouse method provided the best balance between accuracy and both computational and data collection costs; the presence of substantial washload was the primary factor in eliminating the simpler and the more complex techniques. Based on this work, using the selected technique at additional sites in the watershed to determine relative loads and source areas appears plausible. However, to ensure that the methodology presented in this report yields reasonable results at other selected sites in the basin, it is necessary to collect additional verification data sets at those locations.

Colorado↗

USGS2015

Revision and proposed modification for a total maximum daily load model for Upper Klamath Lake, Oregon

This report presents Phase 2 of the review and development of the mass balance water-quality model, originally developed in 2001, that guided establishment of the phosphorus (P) total maximum daily load (TMDL) for Upper Klamath and Agency Lakes, Oregon. The purpose of Phase 2 was to incorporate a longer (19-year) set of external phosphorus loading data into the lake TMDL model than had originally been available, and to develop a proof-of-concept method for modeling algal mortality and the consequent decrease in chlorophyll a that had not been possible with the 2001 TMDL model formulation. Using the extended 1991–2010 external phosphorus loading dataset, the lake TMDL model was recalibrated following the same procedures outlined in the Phase 1 review. The version of the model selected for further development incorporated an updated sediment initial condition, a numerical solution method for the chlorophyll a model, changes to light and phosphorus factors limiting algal growth, and a new pH-model regression, which removed Julian day dependence in order to avoid discontinuities in pH at year boundaries. This updated lake TMDL model was recalibrated using the extended dataset in order to compare calibration parameters to those obtained from a calibration with the original 7.5-year dataset. The resulting algal settling velocity calibrated from the extended dataset was more than twice the value calibrated with the original dataset, and, because the calibrated values of algal settling velocity and recycle rate are related (more rapid settling required more rapid recycling), the recycling rate also was larger than that determined with the original dataset. These changes in calibration parameters highlight the uncertainty in critical rates in the Upper Klamath Lake TMDL model and argue for their direct measurement in future data collection to increase confidence in the model predictions.

Oregon↗

USGS2017

Evaluation and use of U.S. Environmental Protection Agency Clean Watersheds Needs Survey data to quantify nutrient loads to surface water, 1978–2012

Changes in municipal and industrial point-source discharges over time have been an important factor affecting nutrient trends in many of the Nation’s streams and rivers. This report documents how three U.S. Environmental Protection Agency (EPA) national datasets—the Permit Compliance System, the Integrated Compliance Information System, and the Clean Watersheds Needs Survey—were evaluated for use in the U.S. Geological Survey National Water-Quality Assessment project to assess the causes of nutrient trends. This report also describes how a database of total nitrogen load and total phosphorous load was generated for select wastewater treatment facilities in the United States based on information reported in the EPA Clean Watersheds Needs Survey. Nutrient loads were calculated for the years 1978, 1980, 1982, 1984, 1986, 1988, 1990, 1992, 1996, 2000, 2004, 2008, and 2012 based on average nitrogen and phosphorous concentrations for reported treatment levels and on annual reported flow values. The EPA Permit Compliance System (PCS) and Integrated Compliance Information System (ICIS), which monitor point-source facility discharges, together are the Nation’s most spatially comprehensive dataset for nutrients released to surface waters. However, datasets for many individual facilities are incomplete, the PCS/ICIS historical data date back only to 1989, and historical data are available for only a limited number of facilities. Additionally, inconsistencies in facility reporting make it difficult to track or identify changes in nutrient discharges over time. Previous efforts made by the U.S. Geological Survey to “fill in” gaps in the PCS/ICIS data were based on statistical methods—missing data were filled in through the use of a statistical model based on the Standard Industrial Classification code, size, and flow class of the facility and on seasonal nutrient discharges of similar facilities. This approach was used to estimate point-source loads for a single point in time; it was not evaluated for use in generating a consistent data series over time. Another national EPA dataset that is available is the Clean Watersheds Needs Survey (CWNS), conducted every 4 years beginning 1973. The CWNS is an assessment of the capital needs of wastewater facilities to meet the water-quality goals set in the Clean Water Act. Data collected about these facilities include location and contact information for the facilities; population served; flow and treatment level of the facility; estimated capital needs to upgrade, repair, or improve facilities for water quality; and nonpoint-source best management practices. Total nitrogen and total phosphorous load calculations for each of the CWNS years were based on treatment level information and average annual outflow (in million gallons per day) from each of the facilities that had reported it. Treatment levels categories (such as Primary, Secondary, or Advanced) were substituted with average total nitrogen and total phosphorous concentrations for each treatment level based on those reported in literature. The CWNS dataset, like the PCS/ICIS dataset, has years where facilities did not report either a treatment level or an annual average outflow, or both. To fill in the data gaps, simple linear assumptions were made based on each facility’s responses to the survey in years bracketing the data gap or immediately before or after the data gap if open ended. Treatment level and flow data unique to each facility were used to complete the CWNS dataset for that facility.

Scientific Investigations Report↗

USGS2018

Geologic framework and hydrogeology of the Rio Rico and Nogales 7.5’ quadrangles, upper Santa Cruz Basin, Arizona, with three-dimensional hydrogeologic model

Rapid population growth and declining annual recharge to aquifers in the upper Santa Cruz Basin area of southern Arizona, have increased the demand for additional groundwater resources. This demand is predicted to escalate in the future because of higher temperatures, longer droughts, less aquifer recharge, and decreased river and stream base flow. We conducted geologic studies to help evaluate and better understand groundwater resources in the basin. Results of these studies are presented in this report, which summarizes the basin geologic framework and hydrogeology, and presents a threedimensional (3D) hydrogeologic model for the Rio Rico and Nogales 7.5′ quadrangles. Three major hydrogeologic units are displayed in the 3D model; a lower basement confining unit, consisting of Jurassic, Cretaceous, and Tertiary (Paleocene and Oligocene) rocks; a middle unit composed entirely of the Miocene Nogales Formation; and an upper unit consisting of late Miocene to Holocene surficial deposits. The Nogales Formation and the late Miocene to Holocene sediments are the main aquifers in the upper Santa Cruz Basin. The 3D model integrates the hydrogeologic units and faults to define the geometry, structure, and thickness of the aquifer system that provides water to Nogales and surrounding communities of southernmost Arizona. The report includes an EarthVision 3D Viewer, consisting of software enabling the user to view data interactively in 3D space to help explain the internal complexities of the basin geometry, structure, stratigraphy, and hydrology. The 3D model is a synthesis of geologic data from geologic maps, cross sections, and lithologic descriptions and interpretations; and geophysical data including gravity, magnetic data, and airborne electromagnetic data.

Arizona↗

USGS2019

Hydrologic Influences on Water Levels at Three Oaks Recreation Area, Crystal Lake, Illinois, April 14 through September 27, 2016

Hydrologic influences on water levels were investigated at Three Oaks Recreation Area (TORA), a former sand-and-gravel quarry converted into recreational lakes in Crystal Lake, Illinois. From 2009 to 2015, average water levels in the lakes declined nearly 4 feet. It was not clear if these declines were related to variations in weather (precipitation or evaporation) or other hydrologic influences such as municipal supply pumping or nearby quarry operations. Data were collected using three approaches to determine the possibility of such hydrologic influences. First, water levels were collected at 15 minute intervals at three wells equipped with pressure transducers from April 14 through September 27, 2016. The continuous data allowed assessment of lake and well water level responses to precipitation, pumping influences, and quarry operations. Second, a single-day synoptic water-level survey was completed to create a water table map to determine groundwater flow directions. Third, single-well aquifer tests (slug tests) were completed on the three data-collection wells to estimate the aquifer’s horizontal hydraulic conductivity. Collectively, these data were used to determine the velocity and volume of water entering and exiting TORA.

Illinois↗

USGS2024

Low-flow statistics for selected streams in New York, excluding Long Island

The U.S. Geological Survey, in cooperation with the New York State Department of Environmental Conservation, updated low-streamflow statistics for New York, excluding Long Island and including hydrologically connected watersheds in bordering States, for the first time since 1972. Historical daily streamflow data for active and inactive gages were considered for this study with periods of record as recent as March 31, 2022, adding 50 years of data to the last published low-streamflow statistics report for New York and including 119 new gages where low-streamflow statistics are calculated for the first time. Gages were evaluated across several criteria to identify gages that were not suitable for low-streamflow frequency analysis. In addition, gages were evaluated for the presence of alteration within the streamflow period of record based on previous studies and U.S. Geological Survey National Water Information System site metadata including peak flow codes. A trend analysis was performed using the Wilcoxon rank-sum hypothesis test comparing data from the most recent 30 years of record to data from 30 years and earlier for each long-record gage (30 years or more of available data). Results from the trend analysis indicated that 45 unaltered and 32 altered long-record sites had a statistically significant trend for the annual minimum n -day time series; most gages showed increasing trends in the annual minimum n -day time series. Low-streamflow statistics were calculated using the most recent 30 years of record for gages with a statistically significant trend. Before and after 1972, the lowest annual 7-day and 30-day average streamflow that occurs (on average) once every 10 years (7Q10 and 30Q10 statistics respectively) increased significantly at 41 unaltered gages and decreased significantly at 3 unaltered gages where data were available.

New York↗

USGS2007

Results of a Wildlife Toxicology Workshop held by the Smithsonian Institution ? Identification and prioritization of problem statements

On March 13-15, 2007 nearly 50 scientists and administrators from the US and Canada participated in a Smithsonian-sponsored Wildlife Toxicology Workshop. Invitees were from academic, government, conservation and the private organizations and were selected to represent the diverse disciplines that encompass wildlife toxicology. The workshop addressed scientific and policy issues, strengths and weaknesses of current research strategies, interdisciplinary and science-based approaches in the study of complex contaminant issues, mechanisms for disseminating data to policy-makers, and the development of a partner network to meet the challenges facing wildlife toxicology over the next decade. Prior to the meeting, participants were asked to submit issues they deemed to be of highest concern which shaped four thematic groups for discussion: Wildlife Toxicology in Education, Risk Assessment, Multiple Stressors/Complex Mixtures, and Sub-Lethal to Population-Level Effects. From these discussion groups, 18 problem statements were developed and prioritized outlining what were deemed the most important issues to address now and into the future. Along with each problem statement participants developed potential solutions and action steps geared to move each issue forward. The workshop served as a stepping stone for action in the field of wildlife toxicology. These problem statements and the resulting action items are presented to the inter-disciplinary wildlife toxicology community for adoption, and future work and action items in these areas are encouraged. The workshop outcome looks to generate conversation and collaboration that will lead to the development of innovative research, future mechanisms for funding, workshops, working groups, and listserves within the wildlife toxicology community.

Book chapter↗

USGS2024

Seabed maps showing topography, ruggedness, backscatter intensity, sediment mobility, and the distribution of geologic substrates in quadrangle 5 of the Stellwagen Bank National Marine Sanctuary region offshore of Boston, Massachusetts

The U.S. Geological Survey, in cooperation with the National Marine Sanctuary Program of the National Oceanic and Atmospheric Administration, has conducted seabed mapping and related research in the Stellwagen Bank National Marine Sanctuary (SBNMS) region since 1993. The area being mapped using geophysical and geological data includes the SBNMS and the surrounding region, which totals approximately 3,700 square kilometers (km 2 ) and is subdivided into 18 quadrangles. The seabed is a glaciated terrain that is topographically and texturally diverse. Quadrangle 5, the subject of this scientific investigations map, has an area of 211 km 2 and has water depths that range from 23 meters (m) on the Stellwagen Bank crest to 105 m in the Stellwagen Basin. Seven map types, each at a scale of 1:25,000, depict seabed topography, ruggedness, backscatter intensity, distribution of geologic substrates, sediment mobility, distribution of fine- and coarse-grained sand, and substrate mud content. These maps show the distribution of geologic substrates on the crest and western flank of the south-central part of Stellwagen Bank and in Stellwagen Basin to the west. Interpretations of multibeam sonar bathymetric and seabed backscatter imagery, photographs, video imagery, and grain-size analyses were used to create the geology-based maps. Data from 729 stations were analyzed, including 620 sediment samples. The geologic substrate maps of quadrangle 5 show the distribution of 20 substrates that represent a wide range of textures, such as mobile and rippled sand, immobile sand, sand that partially veneers gravel, boulder ridges, and mud. Mapped substrates are characterized by sediment grain-size composition, surface morphology, substrate layering, the mobility or immobility of substrate surfaces, and water depth range. This scientific investigations map portrays the major geological elements (substrates, topographic features, and processes) of environments in quadrangle 5. It is intended to provide a foundation for research into present and past sediment transport processes in a complex terrain, provide insights into the ecological requirements of invertebrate and vertebrate species that utilize the various substrates, and to support seabed management in the region.

Massachusetts↗

USGS2017

Application of decline curve analysis to estimate recovery factors for carbon dioxide enhanced oil recovery

Introduction In the decline curve analysis (DCA) method of estimating recoverable hydrocarbon volumes, the analyst uses historical production data from a well, lease, group of wells (or pattern), or reservoir and plots production rates against time or cumulative production for the analysis. The DCA of an individual well is founded on the same basis as the fluid-flow principles that are used for pressure-transient analysis of a single well in a reservoir domain and therefore can provide scientifically reasonable and accurate results. However, when used for a group of wells, a lease, or a reservoir, the DCA becomes more of an empirical method. Plots from the DCA reflect the reservoir response to the oil withdrawal (or production) under the prevailing operating and reservoir conditions, and they continue to be good tools for estimating recoverable hydrocarbon volumes and future production rates. For predicting the total recoverable hydrocarbon volume, the DCA results can help the analyst to evaluate the reservoir performance under any of the three phases of reservoir productive life—primary, secondary (waterflood), or tertiary (enhanced oil recovery) phases—so long as the historical production data are sufficient to establish decline trends at the end of the three phases.

Scientific Investigations Report↗

USGS2016

Comment on “The reduction of friction in long-runout landslides as an emergent phenomenon” by Brandon C. Johnson et al.

Results from a highly idealized, 2-D computational model indicate that dynamic normal-stress rarefactions might cause friction reduction in long-runout landslides, but the physical relevance of the idealized dynamics has not been confirmed by experimental tests. More importantly, the model results provide no evidence that refutes alternative hypotheses about friction reduction mechanisms. One alternative hypothesis, which is strongly supported by field evidence, experimental data, and the predictions of a well-constrained computational model, involves development of high pore fluid pressures in deforming landslide material or overridden bed material. However, no scientific basis exists for concluding that a universal mechanism is responsible for friction reduction in all long-runout landslides.

Journal of Geophysical Research F: Earth Surface↗