SEARCH · Geology Reports

Results for “Quaternary”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52Linked to original sources

USGS1995

Preliminary Geologic Map of the Thousand Oaks 7.5' Quadrangle, Southern California: A Digital Database

Thousand Oaks is located in Arroyo Conejo, a region spanning both southeastern Ventura County and extreme northwest Los Angeles County in southern California. It was discovered in 1542 by Spanish explorer Juan Rodriquez Cabrillo and eventually became part of the Spanish Rancho El Conejo land grant (conejo means 'rabbit' in Spanish, of which there are many in the area). It is located in the Santa Monica Mountains in the northwestern part of the greater Los Angeles area. The area is bordered by the San Fernando Valley and the city of Los Angeles to the east, Simi Hills to the north, Las Posas Hills and the Santa Rosa Valley to the northwest, Conejo Mountain (also known as Conejo Hills) and Oxnard Plain to the west, and the Santa Monica Mountains and Malibu to the southwest. The geology of the surrounding Santa Monica Mountains is dominated by a sequence of Tertiary sedimentary and volcanic rocks. These include the Tertiary Modelo Formation and the upper part of the Topanga Formation, other minor Tertiary rocks, and Miocene volcanic and intrusive rocks of the Conejo Formation. The basement units within the Santa Monica Mountains are a series of Jurassic and Cretaceous sedimentary rocks. The volcanic rocks of the Conejo Formation underlies much of the surrounding watersheds. The younger Tertiary sedimentary Modelo and Upper Topanga Formations flank the Conejo to the north and south. On the north slope of the Santa Monica Mountains where the Arroyo Conejo and Thousand Oaks are located, the Tertiary formations are gently folded. The south flank of the Santa Monica Mountains is structurally dominated by the Malibu Coast Fault that runs along the foot of the mountains. This fault, and associated structures, creates a complex geologic setting on the south flank of the Santa Monica Mountains. The active nature of the Malibu Coast fault and associated structures accounts for the steep and rugged coastal topography. The most widely exposed rock units in the area are the Plio-Pleistocene marine and nonmarine Pico and Saugus formations, which crop out on the southern flank of South Mountain-Oak Ridge and on the Las Posas uplands and Las Posas Hills. Locally, the Pico Formation consists of marine siltstone and silty shale with minor sandstone and pebbly sandstone. The Saugus Formation overlies and interfingers with the Pico Formation and is composed of interbedded shallow-marine to brackish water sandstone, siltstone, pebble-cobble conglomerate, and coquina beds that grade laterally and vertically into non-marine sandstone, siltstone, and conglomerate. A local member of the Saugus Formation is exposed in the southeast corner of the map area. It is predominantly a volcanic breccia conglomerate that resembles the Conejo Volcanics breccia, but is believed to represent remnants of landslide debris shed from the Conejo Formation into a local trough during Saugus time. Eroded from, and overlying, these bedrock formations are a series of recent alluvial units. These alluvial units include Quaternary alluvium comprised of alluvium, stream deposits, alluvial fan and floodplain deposits, beach deposits, dissected older alluvial deposits. Also present are Quaternary landslides and colluvium composed of landslide deposits and colluvium deposits. The colluvium represents relatively thick continuous deposits of soil and rock fragments that are common on the steep slopes of the coastal canyons, and generally feed the many landslides, soil slips, and debris flows.

Open-File Report↗

USGS1997

Preliminary geologic map of the San Fernando 7.5' quadrangle, southern California: A digital database

The city of San Fernando sits atop a structurally complex, sedimentologically diverse, and tectonically evolving late Tertiary-Quaternary basin situated within the Transverse Ranges of southern California. The surrounding San Fernando Valley (SFV) contains the headwaters of the Los Angeles River and its tributaries. Prior to the advent of flood control, the valley floor was composed of active alluvial fans and floodplains. Seasonal streams emanating from Pacoima and Big Tujunga Canyons drain the complex western San Gabriel Mountains and deposit coarse, highly permeable alluvium that contains generally high-quality ground water. The more shallow western part derives mainly from Tertiary and pre-Tertiary sedimentary rocks, and is underlain by less permeable, fine-grained deposits containing persistent shallow ground water and poorer water quality. Home of the 1971 San Fernando and the 1994 Northridge earthquakes, the SFV experienced near-record levels of strong ground motion in 1994 that caused widespread damage from strong shaking and ground failure. A new map of late Quaternary deposits of the San Fernando area shows that the SFV is a structural trough that has been filled from the sides, with the major source of sediment being large drainages in the San Gabriel Mountains. Deposition on the major alluvial fan of Tujunga Wash and Pacoima Wash, which issues from the San Gabriel Mountains, and on smaller fans, has been influenced by ongoing compressional tectonics in the valley. Late Pleistocene deposits have been cut by active faults and warped over growing folds. Holocene alluvial fans are locally ponded behind active uplifts. The resulting complex pattern of deposits has a major effect on liquefaction hazards. Young sandy sediments generally are highly susceptible to liquefaction where they are saturated, but the distribution of young deposits, their grain size characteristics, and the level of ground water all are complexly dependent on the tectonics of the valley. The San Fernando area lies on the southern slopes of the San Gabriel Mountains. The basement rocks here include high-grade metamorphic rocks of Precambrian age. The mountains are largely composed of crystalline basement that includes the Pelona Scist of probable Mesozoic age that has been overthrust by Precambrian gneisses; the gneisses were subsequently intruded by Mesozoic plutons prior to overthrusting along the latest Cretaceous Vincent thrust. Gneisses of somewhat variable composition and possibly varying ages are found in four terranes, but not all are in contact with Pelona Schist. Large tracts of Precambrian (1.2 billion years old) andesine anorthosite are intrusive into 1.7 billion year-old Mendenhall gneiss, and are found in the western part of the San Gabriels. Mixed with these are younger marble, limestone, and schist of possible Paleozoic age found in association with plutons along the southern margin of the range. The older rocks are intruded by diorite, quartz diorite, and granodiorite of Jurassic age. Also present are siliceous sedimentary rocks of Jurassic age. A thick section of Tertiary sedimentary and volcanic rocks overlie these units. The sediments located south of the San Gabriel Fault are totally different in character from those on the northern range flank, and mostly resemble the western Transverse Ranges due to their deposition in the southeastern Ventura basin; approximately 3,000 m of these sediments are exposed north and west of the city of San Fernando in the Tujunga syncline. Some of the Tertiary rocks are Paleocene and Eocene in age, but the bulk of these rocks are Oligocene and Miocene in age. The Vasquez and Sespe Formations of basal basaltic volcanic and sandstone are Oligocene and lower Miocene in age. These are overlain by clastic rocks of Tick Canyon and Mint Canyon Formations of middle to late Miocene age. Above these rocks are the Castaic, Modelo, and Santa Margarita Formations of fossiliferous marine shale, sand

California↗

USGS1997

Preliminary geologic map of the Simi 7.5' quadrangle, southern California: A digital database

The Simi Quadrangle covers an area of about 62 square miles in southern Ventura County. The Santa Clara River Valley occupies the northwestern corner of the quadrangle. Mountainous terrain of South Mountain and Oak Ridge characterizes the northern and central area. Elevation within the quadrangle ranges from about 250 feet along the arroyo bottoms to over 2200 feet. Steep, highly dissected slopes form much of the boundary of the area. In the southeast, Little Simi Valley, drained by Arroyo Simi/Arroyo Las Posas, separates the southern flank of Oak Ridge from the Las Posas Hills. The Las Posas upland area, a broad elevated region that slopes gently to the south, separates the South Mountain-Oak Ridge highlands from the Las Posas-Camarillo Hills between Little Simi Valley on the east and the Oxnard Plain on the west. This relatively low-lying area is also referred to as the Las Posas Valley. Numerous north-south-trending drainages cut South Mountain and Oak Ridge creating steep narrow canyons on north-facing slopes and wide flat-bottomed canyons with incised streams on south-facing slopes. A network of residential streets and ranch and oilfield roads that traverse the area from U.S. Highway 101 and State Highways 118, 23, and 126 provides access to the area. Current land use includes citrus and avocado orchards, oil well drilling and production, sand and gravel quarries, decorative-rock quarries, cattle grazing, suburban residential development, and golf courses. The oldest geologic unit mapped in the Simi Quadrangle is the upper Eocene to lower Miocene Sespe Formation. The Sespe Formation consists of alluvial fan and floodplain deposits of interbedded pebble-cobble conglomerate, massive to thick-bedded sandstone, and thin-bedded siltstone and claystone. In the northern part of the map area, Sespe Formation is overlain by and interfingers with the upper Oligocene to lower Miocene Vaqueros Formation that is composed of transitional and marine sandstone, siltstone, and claystone with local sandy coquina beds. In the Las Posas Hills, Sespe Formation is unconformably overlain by marine sandstones of the middle Miocene Topanga Group that are interlayered with and intruded by basalt flows, breccia, and diabase dikes of the Conejo Volcanics. Deep-marine strata of the upper Miocene Modelo Formation cover the Vaqueros Formation and Topanga Group along the crests and southern flanks of South Mountain and Oak Ridge. They also occur as isolated outcrops in the Las Posas Hills. Locally, Modelo Formation consists of interbedded diatomaceous shale, claystone, mudstone, and siltstone with minor sandstone, limestone, chert, and tuff beds. The most widely exposed rock units in the area are the Plio-Pleistocene marine and non-marine Pico and Saugus Formations that crop out on the southern flank of South Mountain-Oak Ridge. Locally, the Pico Formation consists of marine siltstone and silty shale with minor sandstone and pebbly sandstone. The Saugus Formation overlies and interfingers with the Pico Formation and is composed of interbedded shallow-marine to brackish water sandstone, siltstone, pebble-to-cobble conglomerate, and coquina beds that grade laterally and vertically into non-marine sandstone, siltstone, and conglomerate. A local member of the Saugus Formation is exposed in the southwest corner of the map area. It is predominantly a volcanic breccia conglomerate that resembles the Conejo Volcanics breccia, but is believed to represent remnants of landslide debris shed from the Conejo Volcanics into a local trough during Saugus time. Quaternary surficial deposits cover the floor and margins of the Little Simi Valley, Santa Clara River Valley in the north, and Arroyo Las Posas in the south, and extend up into the larger canyons that drain South Mountain and Oak Ridge. Extensive surficial deposits are also present in the Las Posas upland area in the southwest. These upper Pleistocene to Holocene sediments consist of older and younger alluvial fan and valley deposits, colluvium, active alluvial fans, and active stream deposits. Pleistocene- to Holocene-age landslide deposits are widespread throughout the Simi Quadrangle, especially in the finer grained Tertiary sedimentary units where bedding planes are dip slopes. In addition, massive slumps are present in the Sespe and Vaqueros Formations on anti-dip slopes. Seismic and well data from the San Fernando Valley (SFV) document evolution of that region from mid-Miocene rifting to north-south contraction. Formations in the western SFV subsurface (Cretaceous to Paleogene strata, and Miocene Topanga and Modelo Formations) trace southward to outcrops in the Santa Monica Mountains that constrain faulting along the valley's south basin edge. Cretaceous strata in the Simi Uplift to the west are over 2 km higher than equivalent strata beneath the western SFV across a boundary marked by the Chatsworth Reservoir fault, and Neogene thinning and offlap. The Simi fault, located at the eastern end of the Simi-Santa Rosa fault system, bounds the northern margins of the Simi and Tierra Rejada Valleys. West of Simi Valley, the Simi fault has placed Miocene Conejo Volcanics over Plio-Pleistocene Saugus Formation rocks. The 15.5 ± 0.8 m.y.a. base of the Conejo Volcanics, identified in oil well logs, is inferred to have a dip-slip separation of about 425 to 550 m, suggesting a low long-term slip rate of about 0.03 mm/yr. However, substantial late Quaternary offset is suggested by the presence of more than 150 m of Pleistocene and younger alluvium that fills the east-west trending, down-dropped bedrock trough beneath western Simi Valley. In addition, trenching within faulted colluvial deposits in Tierra Rejada Valley has revealed evidence of multiple shears within Holocene (?) deposits.

California↗

USGS1999

Proceedings of Conference on Status of Geologic Research and Mapping, Death Valley National Park

Welcome to this conference on the “Status of Geologic Research and Mapping in Death Valley National Park.” We organized this conference in an effort to foster communication and increase awareness among parties conducting geologic research in and around the park. Additionally, we hope to assess the status of geologic mapping efforts within the park boundaries in an effort to provide a framework for future discussions regarding the impact and merits of the development of a park-wide geologic map. The topics presented at this meeting reflect the breadth of recent and ongoing geologic research in and near Death Valley National Park. Sessions include (1) regional structure, tectonics, and bedrock geology; (2) Neogene basin stratigraphy, geophysics, and hydrology; (3) posters on mapping in the Death Valley region and topical ones on Death Valley National Park; (4) imagery, Quaternary stratigraphy and geomorphology, and Quaternary geochronology; and (5) paleoclimate and active tectonics. On a one-day field trip to Death Valley, we will visit areas of “type locality” status as well as areas of new research.

Open-File Report↗

USGS1999

Physical stratigraphy, paleontology, and magnetostratigraphy of the USGS-Santee Coastal Reserve core (CHN-803), Charleston County, South Carolina

The Santee Coastal Reserve core, a 545-ft-deep corehole in northeastern Charleston County, South Carolina, recovered sediments of Late Cretaceous, Paleocene, Eocene, and Quaternary age. The deepest sediments, the Donoho Creek Formation (545-475.7 ft), consist of 69.3 ft of muddy calcareous sand of marine origin. This formation is placed within the upper Campanian calcareous nannofossil Subzone CC 22c. The overlying Peedee Formation (475.7-367.1 ft) in the core consists of 108.6 ft of silty clay of marine origin. It is placed in upper Maastrichtian calcareous nannofossil Subzones CC 25b, CC 26a, and CC 26b. Combined fossil and paleomagnetic information indicates nearly continuous deposition. Foraminifers indicate an outer neritic paleobathymetric setting. The Rhems Formation sensu stricto (367.1-267.3 ft) consists of 99.8 ft of silty clay, muddy sand, and minor calcite-cemented, shelly sand of marine origin. It is apparently the product of rapid sediment accumulation during a short period of time in the early Paleocene (calcareous nannofossil Zone NP 1). The upper part of the Rhems Formation sensu Bybell and others (1998) (267.3-237.4 ft) consists of 29.9 ft of calcite-cemented muddy sand and burrowed fine sand of marine origin. It is placed in calcareous nannofossil Zone NP 4 and, because it shows normal polarity, likely represents the upper part of the lower Paleocene. This unit may be correlative with the lower part of the Lower Bridge Member of the Williamsburg Formation in its type area. The Lower Bridge Member of the Williamsburg Formation (237.4-125.0 ft) has an unconformable contact at 205.0 ft that divides the member into lower muddy sand beds and upper calcareous clay beds. Both are placed in the upper Paleocene calcareous nannofossil Zone NP 5. The Chicora Member of the Williamsburg Formation (125-51.5 ft) consists of 73.5 ft of muddy, shelly sand of marine origin. It is poorly dated but includes late Paleocene nannofossils (Zones NP 5 and NP 6). A mollusk-bryozoan limestone (51.5-42.0 ft) above the Chicora Member of the Williamsburg yields early Eocene calcareous nannofossils representing both Zone NP 9/10 and Zone NP 12, together with pollen and dinocysts that are younger. Sediments of middle and late Eocene, Oligocene, Miocene, and Pliocene ages were not recovered in the Santee Coastal Reserve core. The upper 42.0 ft of sediments represent Quaternary deposits and are included in the Wando Formation (42.0-28.0 ft) and the informal Silver Bluff beds (28.0-0 ft).

South Carolina↗

USGS1999

Physical stratigraphy, paleontology, and magnetostratigraphy of the USGS-Santee Coastal Reserve core (CHN-803), Charleston County, South Carolina

Open-File Report↗

USGS1999

Geologic map of the Hart Peak quadrangle, California and Nevada: A digital database

The Hart Peak 1:24,000-scale quadrangle is located about 12 km southwest of Searchlight, Nevada, comprehending the eastern part of the Castle Peaks, California, and most of the Castle Mountains and the northwestern part of the Piute Range, in California and Nevada. The Castle Peaks area constitutes the northeasternmost part of the northeast-trending New York Mountains. The Castle Mountains straddle the California-Nevada State line between the Castle Peaks and north-trending Piute Range. The southern part of the Piute Range, near Civil War-era Fort Piute, adjoins Homer Mountain mapped by Spencer and Turner (1985). Adjacent and nearby 1:24,000-scale quadrangles include Castle Peaks, East of Grotto Hills, Homer Mountain, and Signal Hill, Calif.; also Tenmile Well and West of Juniper Mine, Calif. and Nev. The oldest rocks in the Hart Peak quadrangle are Early Proterozoic gneiss and foliated granite that crop out in the northern part of the quadrangle on the eastern flank of the Castle Peaks and in the central Castle Mountains (Wooden and Miller, 1990). Paleozoic rocks are uncommon and Mesozoic granitic rocks are not found in the map area. The older rocks are overlain nonconformably by several km of Miocene volcanic deposits, which accumulated in local basins. Local dikes and domes are sources of most Miocene eruptive units; younger Miocene intrusions cut all the older rocks. Upper Miocene to Quaternary gravel deposits interfinger with the uppermost volcanic flows; the contact between volcanic rocks and the gravel deposits is unconformable locally. Canyons and intermontane valleys contain dissected Quaternary alluvialfan deposits that are mantled by active drainage and alluvial fan detritus.

California, Nevada↗

USGS1999

Geologic map of the East of Grotto Hills quadrangle, California: A digital database

The East of Grotto Hills 1:24,000-scale quadrangle of California lies west of the Colorado River about 30 km southwest of Searchlight, Nevada, near the boundary between the northern and southern parts of the Basin and Range Province. The quadrangle includes the eastern margin of Lanfair Valley, the southernmost part of the Castle Mountains, and part of the northwest Piute Range. The generally north-trending Piute Range aligns with the Piute and Dead Mountains of California and the Newberry and Eldorado Mountains and McCullough Range of Nevada. The southern part of the Piute Range adjoins Homer Mountain (Spencer and Turner, 1985) near Civil War-era Fort Piute. Adjacent 1:24,000-scale quadrangles include Castle Peaks, Homer Mountain, and Signal Hill, Calif.; also Hart Peak, Tenmile Well, and West of Juniper Mine, Calif. and Nev. The mapped area contains Tertiary (Miocene) volcanic and sedimentary rocks, interbedded with and overlain by Tertiary and Quaternary surficial deposits. Miocene intrusions mark conduits that served as feeders for the Miocene volcanic rocks, which also contain late magma pulses that cut the volcanic section. Upper Miocene conglomerate deposits interfinger with the uppermost volcanic flows. Canyons and intermontane valleys contain dissected Quaternary alluvial-fan deposits, mantled by active alluvial-fan deposits and detritus of active drainages. The alluvial materials were derived largely from Early Proterozoic granite and gneiss complexes, intruded by Mesozoic granite, dominate the heads of Lanfair Valley drainages in the New York Mountains and Mid Hills (fig. 1; Jennings, 1961). Similar rocks also underlie Tertiary deposits in the Castle Peaks, Castle Mountains, and eastern Piute Range.

California↗

USGS1999

Stratigraphic framework maps of the nearshore area of southern Long Island from Fire Island to Montauk Point, New York

The maps presented in this report (depth to Coastal Plain unconformity, Quaternary sediment thickness, paleochannel thickness, and modern sand thickness) are helpful for determining sand-resource availability for beach nourishment programs and understanding the influence that the inner-shelf framework of southern Long Island has on coastal processes and evolution. The maps showing structure of the Coastal Plain unconformity and thickness of overlying Quaternary sediment delineate the framework of the coastal region. The map showing the distribution and thickness of paleochannel fill indicates areas not suitable as sources for beach nourishment, assuming the channels contain muddy estuarine deposits. The areas between channels are Pleistocene glacial deposits and probably consist of coarse sediment that may be suitable for beach nourishment. These coarser-grained glacial deposits are the source for modern sand deposits. The modern sands have been reworked primarily from glacial deposits and a Cretaceous outcrop off Watch Hill. These reworked deposits provide well-sorted clean sand that have and will provide nourishment for southern Long Island beaches.

Open-File Report↗

USGS1980

Geology of the Round Bay quadrangle, Anne Arundel County, Maryland

Six Coastal Plain formations and one group crop out in the Round Bay quadrangle near the inner edge of the Atlantic Coastal Plain physiographic province. The quadrangle lies astride the Severn River, in Anne Arundel County, near Annapolis, Md. The seven stratigraphic units aggregate as much as 128 m in outcrop. In ascending order, the units are: the upper part of the Potomac Group and the Magothy, Matawan, and Severn Formations, all of Cretaceous age; the Brightseat and Aquia Formations of Paleocene age and the Calvert Formation of Miocene age. Quaternary deposits are thin and cover only small areas; they are all mapped under one unit. Several small, thin deposits of Tertiary alluvium are mapped separately. The largely unconsolidated Cretaceous and Tertiary formations consist chiefly of quartz, glauconite, clays, muscovite, chlorite, lignite, feldspar, and pyrite. Quaternary sediments are mostly locally derived sands, silts, and clays with some gravel and, in the finer sediments, considerable amounts of organic matter. The Cretaceous and Tertiary units strike generally northeast; the younger the formation, the more easterly it strikes. Dips are gentle, 3.6 to 15 m per kilometer toward the southeast, and decrease upward through the section. The Round Bay quadrangle is near the southern limit of several formations that thin progressively toward the southwest from New Jersey. Some pinch out between Betterton, on the eastern shore of Chesapeake Bay, and Round Bay, on the western shore, whereas others are present only as thin remnants 1-2 m thick. Resources of the quadrangle include abundant ground water, sand, and high land values near water.

Maryland↗

USGS1982

Geomorphology of New England

Widely scattered terrestrial deposits of Cretaceous or Tertiary age and extensive nearshore and fluvial Coastal Plain deposits now largely beneath the sea indicate that the New England region has been above sea level during and since the Late Cretaceous. Estimates of rates of erosion based on sediment load in rivers and on volume of sediments in the Coastal Plain suggest that if the New England highlands had not been uplifted in the Miocene, the area would now be largely a lowland. If the estimated rates of erosion and uplift are of the right order of magnitude, then it is extremely unlikely that any part of the present landscape dates back before Miocene time. The only exception would be lowlands eroded in the early Mesozoic, later buried beneath Mesozoic and Cenozoic deposits, and exhumed by stream and glacial erosion during the later Cenozoic. Many of the rocks in the New England highlands are similar to those that underlie the Piedmont province in the central and southern Appalachians, where the relief over large areas is much less than in the highlands of New England. These comparisons suggest that the New England highlands have been upwarped in late Cenozoic time. The uplift took place in the Miocene and may have continued into the Quaternary. The New England landscape is primarily controlled by the underlying bedrock. Erosion and deposition during the Quaternary, related in large part to glaciation, have produced only minor changes in drainage and in topography. Shale and graywacke of Ordovician, Cambrian, and Proterozoic age forming the Taconic highlands, and akalic plutonic rocks of Mesozoic age are all highland makers. Sandstone and shale of Jurassic and Triassic age, similar rocks of Carboniferous age, and dolomite, limestone, and shale of Ordovician and Cambrian age commonly underlie lowlands. High-grade metapelites are more resistant than similar schists of low metamorphic grade and form the highest mountains in New England. Feldspathic rocks tend to form lowlands. Alkalic plutonic rocks of Mesozoic age underlie a large area in the White Mountains of New Hampshire and doubtless are a factor in their location and relief. Where the major streams flow across the regional structure of the bedrock, the location of the crossings probably is related to some other characteristic of the bedrock, such as joints or cross faults. The course of the Connecticut River is the result of the adjustment of the drainage to the bedrock geology during a long period of time. There is no ready explanation why many of the large rivers do not cross areas of calcalkalic plutonic rock, but rather take a longer course around such areas, which tend to include segments of the divide between the streams. The presence of coarse clastic materials in Miocene rocks of the emerged Coastal Plain of the Middle Atlantic States suggests uplift of the adjacent Piedmont and of the Adirondack Mountains at that time. The Miocene rocks of the submerged Coastal Plain in the Gulf of Maine and south of New England are fine grained and contain only small amounts of fluvial gravel. Perhaps the coarse clastic materials shed by the New England highlands in late Cenozoic time are buried by or incorporated in the Pleistocene glacial deposits.

Professional Paper↗

USGS1989

Studies of geology and hydrology in the Basin and Range Province, Southwestern United States, for isolation of high-level radioactive waste - Basis of characterization and evaluation

The geologic and hydrologic factors in selected regions of the Basin and Range province were examined to identify prospective areas for further study that may provide isolation of high-level radioactive waste from the accessible environment. The six regions selected for study were characterized with respect to the following guidelines: (1) Potential repository media; (2) Quaternary tectonic conditions; (3) climatic change and geomorphic processes; (4) ground-water conditions; (5) ground-water quality; and (6) mineral and energy resources. The repository medium will function as the first natural barrier to radionuclide travel by virtue of associated slow ground-water velocity. The principal rock types considered as host media include granitic, intermediate, and mafic intrusive rocks; argillaceous rocks; salt and anhydrite; volcanic mudflow (laharic) breccias; some intrusive rhyolitic plugs and stocks; partially zeolitized tuff; and metamorphic rocks. In the unsaturated zone, the permeability and hydrologic properties of the rocks and the hydrologic setting are more important than the rock type. Media ideally should be permeable to provide drainage and should have a minimal water flux The ground-water flow path from a repository to the accessible environment needs to present major barriers to the transport of radionuclides. Factors considered in evaluating the ground-water conditions include ground-water traveltimes and quality, confining beds, and earth materials favorable for retardation of radionuclides. Ground-water velocities in the regions were calculated from estimated hydraulic properties of the rocks and gradients. Because site-specific data on hydraulic properties are not available, data from the literature were assembled and synthesized to obtain values for use in estimating ground-water velocities. Hydraulic conductivities for many rock types having granular and fracture permeability follow a log-normal distribution. Porosity for granular and very weathered crystalline rock tends to be normally distributed; porosity of fractured crystalline rock probably follows a log-normal distribution. The tectonic setting needs to prevent an increase in radionuclides to the accessible environment. Data on historic seismicity and heat flow, Quaternary faults, volcanism, and uplift were used to assess the tectonic conditions. Long-term late Cenozoic rates of vertical crustal movement in the Basin and Range province range from less than 2 meters per 104 years to greater than 20 meters per 104 years. Shortterm rates of vertical movement may be more than an order of magnitude greater, based on geodetic leveling. Changes in tectonic and climatic processes may potentially cause changes in hydrologic conditions and geomorphology that could affect the integrity of a deep, mined repository either adversely or beneficially. The transition from a full-glacial climate to the current interglacial condition has occurred within the past 15,000 years. Reconstructions of the last full-glacial climate indicate that, at that time, there was greater water availability for runoff and vegetation growth than there is now. Based on the increased water availability and depending on seasonal distribution of precipitation, on soil characteristics, on topography, and on other characteristics, ground-water recharge during the full-glacial climate is estimated to have been possibly 2 to 10 or more times the modern rate. During the full-glacial climate, more than 100 lakes occupied closed basins in the province. Any increase in ground-water recharge and refilling of Pleistocene lakes will tend to decrease the distance of ground-water flow and its time of travel. The unsaturated zone this zone is considered a potential host medium where the thickness is greater than 150 m will be decreased by these changes. In contrast, incision of streams and other geomorphic, tectonic, or climatically induced changes that lower the ground-water discharge level will tend to increase the thickness of the unsaturated zone. Aggradation in basinal troughs may either decrease or increase the thickness of the unsaturated zone. Aggradation in basins that causes the ground-water discharge level to rise will tend to decrease the thickness of unsaturated zone in the adjacent uplands; aggradation in basins where the ground-water discharge level remains the same or is lowered will increase the unsaturated thickness of basin fill. Records show that, throughout late Cenozoic time in the Basin and Range province, continued vertical crustal movements have tended to maintain mountain ranges and closed basins, whereas aggradation of the basins and erosion of the mountain ranges have tended to decrease the topographic relief. Maximum rates of denudation for small basins in areas climatically similar to the Basin and Range province are about 2 meters per 104 years. For sites unaffected by stream incision and scarp retreat, a conservative estimate of erosion affecting long-term changes in depth of burial would appear to be 2 meters per 104 years, or, equal to the long-term rate of vertical crustal movement where greater than 2 meters per 104 years. The response of the ground-water conditions to climatic and geomorphically induced boundary conditions is significant from the points of: (1) The potential maximum change in the ground-water flow system; (2) the time of response of the ground-water system; and (3) the present state of the ground-water system as a result of past changes. Effects of longterm climatic and tectonic changes on hydrologic and geomorphic conditions differ from area to area, and rates of change of geomorphic and hydrologic conditions may vary significantly. Therefore, sitespecific studies need to be made to assess the long-term integrity of deep, mined repositories.

Arizona, California, Idaho, Nevada, New Mexico, Te↗

USGS2007

Quaternarymagmatism in the Cascades - Geologic perspectives

Foreward The Cascade magmatic arc is a belt of Quaternary volcanoes that extends 1,250 km from Lassen Peak in northern California to Meager Mountain in Canada, above the subduction zone where the Juan de Fuca Plate plunges beneath the North American Plate. This Professional Paper presents a synthesis of the entire volcanic arc, addressing all 2,300 known Quaternary volcanoes, not just the 30 or so visually prominent peaks that comprise the volcanic skyline. Study of Cascade volcanoes goes back to the geological explorers of the late 19th century and the seminal investigations of Howel Williams in the 1920s and 1930s. However, major progress and application of modern scientific methods and instrumentation began only in the 1970s with the advent of systematic geological, geophysical, and geochemical studies of the entire arc. Initial stimulus from the USGS Geothermal Research Program was enhanced by the USGS Volcano Hazards Program following the 1980 eruption of Mount St. Helens. Together, these two USGS Programs have provided more than three decades of stable funding, staffing, and analytical support. This Professional Paper summarizes the resultant USGS data sets and integrates them with the parallel contributions of other investigators. The product is based upon an all-encompassing and definitive geological database, including chemical and isotopic analyses to characterize the rocks and geochronology to provide the critical time constraints. Until now, this massive amount of data has not been summarized, and a systematic and uniform interpretation firmly grounded in geological fact has been lacking. Herein lies the primary utility of this Cascade volume. It not only will be the mandatory starting point for new workers, but also will provide essential geological context to broaden the perspectives of current investigators of specific Cascade volcanoes. Wes Hildreth's insightful understanding of volcanic processes and his uncompromising scientific integrity make him uniquely qualified to present this synthesis. During more than three decades of volcanological studies, he has carried out comprehensive investigations of Mount Adams, Mount Baker, the Three Sisters, and the Simcoe Mountains Volcanic Field. He also brings a broad experience in other volcanic arcs, having conducted integrated field and laboratory investigations at several major volcanic centers in the Andes and the Aleutian arcs. His expertise and perspective have been further enhanced by in-depth petrologic studies of caldera environments, primarily in Long Valley, California, and Yellowstone. On the basis of all these field and laboratory investigations and exhaustive literature searches, he has published three definitive petrologic syntheses addressing the passage and transformation of basaltic magmas from their mantle sources through the crust to form the many types of volcanic manifestations at the Earth's surface. A major strength of this Professional Paper is that it adheres to data first and foremost, and only then correlates these data with relevant theories. Petrological and geophysical interpretation is left to the later sections of the volume, and even there is never allowed to stray from the pertinent databases. Hildreth's interpretations are not just idle speculations, but are carefully reasoned inferences firmly based on his thorough evaluation of the observational geological data. Professional Paper 1744 should not be skimmed lightly, in the hope that the salient points will quickly rub off. Instead, every section, indeed every paragraph, presents scholarly observations and insightful interpretations that demand careful and thoughtful study. This volume will influence and guide the course of Cascade investigations for decades to come.

British Columbia, California, Oregon, Washington↗

USGS2026

Forecasting volcanic activity in Germany—A multi-criteria approach

Igneous activity, including shallow intrusions and volcanism, has the potential to disrupt underground critical infrastructure. Notably, future underground infrastructure projects like high-level radioactive waste repositories must be sited in areas of extremely low disruption probability by igneous activity. In Germany, according to the Repository Site Selection Act of 2017 (Standortauswahlgesetz, or StandAG), areas in which Quaternary volcanism is either present or future volcanic activity is expected within the next 1 million years (m.y.) must be excluded from the site selection process. Although the locations of regions with Quaternary volcanism are reasonably well known in Germany, forecasting potential igneous activity at intraplate volcanic fields is challenging, as many processes and their interactions control the spatial distribution of volcanic centers. Here, a semi-quantitative, multi-criteria approach is proposed for a regional evaluation of the relative potential of future igneous activity in Germany. A variety of geoscientific indicators are used, including seismic anomalies in Earth’s mantle, gravity data, tectonic activity, sutures, ground motion, earthquakes, mantle degassing centers, and geochronological data of volcanic rocks. The indicators describe the sequence of processes from potential melt generation in Earth’s mantle, through ascent and accumulation of melt within the lithosphere, to eruption at Earth’s surface. In total, 15 out of 30 proposed geoscientific indicators are selected and quantified using 20 total assigned parameters. Defined threshold values are used to spatially delimit relevant parameter properties to focus on areas with higher potential of future magmatic activity. To consider uncertainties of parameters and their underlying processes, which are usually more spatially extensive below ground, buffer zones are defined in which values of relevance decrease with increasing distance from the initial lateral shape of a parameter. Normalized parameters are combined into an index, whose spatial value distribution is used to differentiate the relative potential of future igneous activity (within the next 1 m.y.). The sensitivity of the results is shown by varying the weighting factors for the relevant parameters in country-wide index maps. Thereby, profiles illustrate the distribution of the resulting index values and respective index fractions of various parameters. Different index maps for the relative potential of future igneous activity are presented and can be used for hazard assessments.

Professional Paper↗

USGS1968

Stratigraphy of Slick Rock district and vicinity, San Miguel and Dolores Counties, Colorado

The Slick Rock district covers about 570 square miles in western San Miguel and Dolores Counties, in southwestern Colorado. It is at the south edge of the salt-anticline region of southwestern Colorado and southeastern Utah and of the Uravan mineral belt. Deposition of Paleozoic sedimentary rocks in the district and vicinity was principally controlled by development of the Paradox Basin, and of Mesozoic rocks by development of a depositional basin farther west. The Paleozoic rocks generally are thickest at the northeast side of the Paradox Basin in a northwest- trending trough which seems to be a wide graben in Precambrian igneous and metamorphic basement rocks; Mesozoic rocks generally thicken westward and southwestward from the district. Sedimentary rocks rest on a Precambrian basement consisting of a variety of rocks, including granite and amphibolite. The surface of the Precambrian rocks is irregular and generally more than 2,000 feet below sea level and 7,000-11,000 feet below the ground surface. In the northern part of the district the Precambrian surface plunges abruptly northeastward into the trough occupying the northeast side of the Paradox Basin, and in the southern part it sags in a narrow northeasterly oriented trough. Deepening of both troughs, or crustal deformation in their vicinity, influenced sedimentation during much of late Paleozoic and Mesozoic time. The maximum total thickness of sedimentary rocks underlying the district is 13,000 feet, and prior to extensive erosion in the late Tertiary and the Quaternary it may have been as much as about 18,000 feet. The lower 5,000 feet or more of the sequence of sedimentary rocks consists of arenaceous strata of early Paleozoic age overlain by dominantly marine carbonate rocks and evaporite beds interbedded with lesser amounts of clastic sediments of late Paleozoic age. Overlying these rocks is about 4,500 feet of terrestrial clastic sediments, dominantly sandstone with lesser amounts of shale, mudstone, siltstone, and conglomerate, of late Paleozoic and Mesozoic age. Above these rocks is as much as 2,300 feet of marine shale of late Mesozoic age. Perhaps about 5,000 feet of clastic sedimentary rocks, dominantly sandstone and in part shale, of late Mesozoic and early Cenozoic age, overlay the older rocks of the district prior to late Cenozoic erosion... Outside the Slick Rock district the Mancos Shale is overlain by dominantly terrestrial sandstone, mudstone, and coaly beds of the Mesaverde Group of Late Cretaceous age, and younger units such as the Wasatch and Green River Formations of Tertiary age, which once may have extended across the district. These units, totaling possibly 5,000 feet in thickness, were removed by erosion following middle Tertiary uplift of the Colorado Plateau. Igneous rocks of Tertiary age crop out in only one small area in the district, but they are intruded extensively in the Mancos Shale east of the district, and, as shown by deep oil test wells, appear to be intruded widely in the Paradox Member of the Hermosa Formation in the southern part of the district and southeast of the district. Andesite porphyry occurs in a dike on Glade Mountain, microgranogabbro and microgranodiorite occur in thin sills east of the district, and rocks of similar composition form thick sills in the subsurface. All are similar chemically to igneous rocks in the San Juan Mountains southeast of the district and probably were the result of a specific igneous episode. They were intruded most likely during the Miocene. Surficial deposits of Quaternary age include glacial till, terrace gravels, alluvial fans, landslide debris, loess, other soil, alluvium, colluvium, and talus. On Glade Mountain, glacial till of probable early Pleistocene age merges westward with terrace gravels that are correlative with terrace gravels which lie on an old weathered surface of Mancos Shale farther west on the rim of the Dolores River Canyon.

Colorado↗

USGS2004

Map showing spatial and temporal relations of mountain and continental glaciations on the Northern Plains, primarily in northern Montana and northwestern North Dakota

This report is an overview of glacial limits and glacial history on the plains in northern Montana and northeastern North Dakota (long 102?-114?W.) and also in adjacent southern Alberta and Saskatchewan, Canada. In the Rocky Mountains and on the plains adjacent to the mountains in Montana, the map also depicts spatial relations of valley glaciers and piedmont ice lobes to continental ice sheets. Glacial limits east of 102?, in the United States and also in adjacent Canada, are depicted on published maps of the U.S. Geological Survey Quaternary Geologic Atlas of the United States (I-1420) map series. The limits shown here are from data compiled for the Lethbridge, Regina, Yellowstone, and Big Horn Mountains 4? x 6? quadrangles in the Quaternary Geologic Atlas series. This geospatial database has been prepared with a degree of detail appropriate for viewing at a scale of 1:1,000,000. Because of the degree of generalization required, the map is intended for regional analysis, rather than for detailed analysis in specific areas. It depicts the geographic positions of the limits of mountain and continental glaciations and the limits of selected glacial readvances. That information provides a foundation for reconstruction of geologic history and for reconstruction. The base map is simplified. Selected hydrographic features, selected towns and cities, selected physiographic features, and a grid of 1? x 2? topographic quadrangles are included to aid the reader in location of the glacial limits and other features that are depicted here on other maps at different scales. Most of the geologic data were compiled at 1:250,000 scale. The nominal reading scale of the digitized map data is 1:1,000,000. Enlargement will not restore resolution that was lost by simplification or generalization of data. Accompanying illustrations show regional directions of ice movement from Canada into the United States during maximum Illinoian glaciation, during maximum late Wisconsin glaciation, and during a later regional glacial readvance maximum

Scientific Investigations Map↗

USGS2004

Surficial Geologic Map of the Tanacross B-6 Quadrangle, East-Central Alaska

The Tanacross B-6 1:63,360-scale quadrangle, through which the Alaska Highway runs, is in east-central Alaska about 190 km west of the Yukon border. The surficial geologic mapping in the quadrangle is in support of the 'Geologic Mapping in support of land, resources and hazards issues in Alaska' Project of the USGS National Cooperative Geologic Mapping Program. The Tanacross B-6 quadrangle contains parts of three physiographic provinces: the Alaska Range, the Yukon-Tanana Upland, and the Northway-Tanana Lowland. The high, rugged, glaciated landscape of the eastern Alaska Range dominates the southern and western areas of the map area. Within the map area, about a dozen peaks rise to more than 1,710 m. In contrast, the gently rolling hills of the Yukon-Tanana Upland, in the northeastern map area, only rise to about 975 m. Between the Alaska Range and the Yukon-Tanana Upland lies the Northway-Tanana Lowland, which contains the northwesterly flowing Tanana River. Elevations along the floor of the lowland generally range between 390 and 420 m.The map provides interpretations of the Quaternary surficial deposits and associated geologic hazards in this area of the upper Tanana valley. Because the map area is dominated by various surficial deposits, the map depicts 18 different Quaternary surficial units consisting of artificial fill, alluvial, colluvial, organic, eolian, glaciofluvial, glacial, and periglacial deposits. Deposits shown on this map are generally greater than 1 m thick. The map is accompanied by a text containing unit descriptions incorporating information pertaining to material type, location, associated hazards, resource use (if any), and thickness.

Scientific Investigations Map↗

USGS2006

Surficial Geologic Map of the Tanacross B-4 Quadrangle, East-Central Alaska

The Tanacross B-4 1:63,360-scale quadrangle, through which the Alaska Highway runs, is in east-central Alaska about 100 mi west of the Yukon border. The surficial geologic mapping in the quadrangle is in support of the 'Geologic Mapping in support of land, resources, and hazards issues in Alaska' Project of the USGS National Cooperative Geologic Mapping Program. The Tanacross B-4 quadrangle contains parts of two physiographic provinces, the Yukon-Tanana Upland and the Northway-Tanana Lowland. The gently rolling hills of the Yukon-Tanana Upland, in the northern and eastern map area, rise to about 3,100 ft. The Northway-Tanana Lowland, in the western and southern map area, contains the westerly flowing Tanana River. Elevations along the floor of the lowland generally range between 1,540 and 1,700 ft. The dominant feature within the map is the Tok fan, which occupies about 20 percent of the map area. This large, nearly featureless fan contains a high percentage of volcanic clasts derived from outside the present-day drainage of the Tok River. The map provides interpretations of the Quaternary surficial deposits and associated geologic hazards in this area of the upper Tanana valley. Because the map area is dominated by various surficial deposits, the map depicts 13 different Quaternary surficial units consisting of man-made, alluvial, colluvial, organic, lacustrine, and eolian deposits. Deposits shown on this map are generally greater than 1 m thick. The map is accompanied by a text containing unit descriptions incorporating information pertaining to material type, location, associated hazards, resource use (if any), and thickness.

Scientific Investigations Map↗