Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Oregon Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52Linked to original sources
USGS2008

Pesticide Occurrence and Distribution in the Lower Clackamas River Basin, Oregon, 2000-2005

Pesticide occurrence and distribution in the lower Clackamas River basin was evaluated in 2000?2005, when 119 water samples were analyzed for a suite of 86?198 dissolved pesticides. Sampling included the lower-basin tributaries and the Clackamas River mainstem, along with paired samples of pre- and post-treatment drinking water (source and finished water) from one of four drinking water-treatment plants that draw water from the lower river. Most of the sampling in the tributaries occurred during storms, whereas most of the source and finished water samples from the study drinking-water treatment plant were obtained at regular intervals, and targeted one storm event in 2005. In all, 63 pesticide compounds were detected, including 33 herbicides, 15 insecticides, 6 fungicides, and 9 pesticide degradation products. Atrazine and simazine were detected in about half of samples, and atrazine and one of its degradates (deethylatrazine) were detected together in 30 percent of samples. Other high-use herbicides such as glyphosate, triclopyr, 2,4-D, and metolachlor also were frequently detected, particularly in the lower-basin tributaries. Pesticides were detected in all eight of the lower-basin tributaries sampled, and were also frequently detected in the lower Clackamas River. Although pesticides were detected in all of the lower basin tributaries, the highest pesticide loads (amounts) were found in Deep and Rock Creeks. These medium-sized streams drain a mix of agricultural land (row crops and nurseries), pastureland, and rural residential areas. The highest pesticide loads were found in Rock Creek at 172nd Avenue and in two Deep Creek tributaries, North Fork Deep and Noyer Creeks, where 15?18 pesticides were detected. Pesticide yields (loads per unit area) were highest in Cow and Carli Creeks, two small streams that drain the highly urban and industrial northwestern part of the lower basin. Other sites having relatively high pesticide yields included middle Rock Creek and upper Noyer Creek, which drain basins having nurseries, pasture, and rural residential land. Some concentrations of insecticides (diazinon, chlorpyrifos, azinphos-methyl, and p,p?-DDE) exceeded U.S. Environmental Protection Agency (USEPA) aquatic-life benchmarks in Carli, Sieben, Rock, Noyer, Doane, and North Fork Deep Creeks. One azinphos-methyl concentration in Doane Creek (0.21 micrograms per liter [?g/L]) exceeded Federal and State of Oregon benchmarks for the protection of fish and benthic invertebrates. Concentrations of several other pesticide compounds exceeded non-USEPA benchmarks. Twenty-six pesticides or degradates were detected in the Clackamas River mainstem, typically at much lower concentrations than those detected in the lower-basin tributaries. At least 1 pesticide was detected in 65 percent of 34 samples collected from the Clackamas River, with an average of 2?3 pesticides per sample. Pesticides were detected in 9 (or 60 percent) of the 15 finished water samples collected from the study water-treatment plant during 2003?2005. These included 10 herbicides, 1 insecticide, 1 fungicide, 1 insect repellent, and 2 pesticide degradates. The herbicides diuron and simazine were the most frequently detected (four times each during the study), at concentrations far below human-health benchmarks?USEPA Maximum Contaminant Levels or U.S. Geological Survey human Health-Based Screening Levels (HBSLs). The highest pesticide concentration in finished drinking water was 0.18 ?g/L of diuron, which was 11 times lower than its low HBSL benchmark. Although 0?2 pesticides were detected in most finished water samples, 9 and 6 pesticides were detected in 2 storm-associated samples from May and September 2005, respectively. Three of the unregulated compounds detected in finished drinking water (diazinon-oxon, deethylatrazine [CIAT], and N, N-diethyl-m-toluamide [DEET]) do not have human-health benchmarks available for comparison. Although most of the 51 curren

Scientific Investigations Report↗
USGS2012

Preliminary assessment of channel stability and bed-material transport in the Tillamook Bay tributaries and Nehalem River basin, northwestern Oregon

This report summarizes a preliminary study of bed-material transport, vertical and lateral channel changes, and existing datasets for the Tillamook (drainage area 156 square kilometers [km 2 ]), Trask (451 km 2 ), Wilson (500 km 2 ), Kilchis (169 km 2 ), Miami (94 km 2 ), and Nehalem (2,207 km 2 ) Rivers along the northwestern Oregon coast. This study, conducted in coopera-tion with the U.S. Army Corps of Engineers and Oregon Department of State Lands to inform permitting decisions regarding instream gravel mining, revealed that: Study areas along the six rivers can be divided into reaches based on tidal influence and topography. The fluvial (nontidal or dominated by riverine processes) reaches vary in length (2.4-9.3 kilometer [km]), gradient (0.0011-0.0075 meter of elevation change per meter of channel length [m/m]), and bed-material composition (a mixture of alluvium and intermittent bedrock outcrops to predominately alluvium). In fluvial reaches, unit bar area (square meter of bar area per meter of channel length [m 2 /m]) as mapped from 2009 photographs ranged from 7.1 m 2 /m on the Tillamook River to 27.9 m 2 /m on the Miami River. In tidal reaches, all six rivers flow over alluvial deposits, but have varying gradients (0.0001-0.0013 m/m) and lengths affected by tide (1.3-24.6 km). The Miami River has the steepest and shortest tidal reach and the Nehalem River has the flattest and longest tidal reach. Bars in the tidal reaches are generally composed of sand and mud. Unit bar area was greatest in the Tidal Nehalem Reach, where extensive mud flats flank the lower channel. Background factors such as valley and channel confinement, basin geology, channel slope, and tidal extent control the spatial variation in the accumulation and texture of bed material. Presently, the Upper Fluvial Wilson and Miami Reaches and Fluvial Nehalem Reach have the greatest abundance of gravel bars, likely owing to local bed-material sources in combination with decreasing channel gradient and valley confinement. Natural and human-caused disturbances such as mass movements, logging, fire, channel modifications for navigation and flood control, and gravel mining also have varying effects on channel condition, bed-material transport, and distribution and area of bars throughout the study areas and over time. Existing datasets include at least 16 and 18 sets of aerial and orthophotographs that were taken of the study areas in the Tillamook Bay tributary basins and Nehalem River basin, respectively, from 1939 to 2011. These photographs are available for future assessments of long-term changes in channel condition, bar area, and vegetation establishment patterns. High resolution Light Detection And Ranging (LiDAR) surveys acquired in 2007-2009 could support future quantitative analyses of channel morphology and bed-material transport in all study areas. A review of deposited and mined gravel volumes reported for instream gravel mining sites shows that bed-material deposition tends to rebuild mined bar surfaces in most years. Mean annual deposition volumes on individual bars exceeded 3,000 cubic meters (m 3 ) on Donaldson Bar on the Wilson River, Dill Bar on the Kilchis River, and Plant and Winslow Bars on the Nehalem River. Cumulative reported volumes of bed-material deposition were greatest at Donaldson and Dill Bars, totaling over 25,000 m 3 per site from 2004 to 2011. Within this period, reported cumulative mined volumes were greatest for the Donaldson, Plant, and Winslow Bars, ranging from 24,470 to 33,940 m 3 . Analysis of historical stage-streamflow data collected by the U.S. Geological Survey on the Wilson River near Tillamook (14301500) and Nehalem River near Foss (14301000) shows that these rivers have episodically aggraded and incised, mostly following high flow events, but they do not exhibit systematic, long-term trends in bed elevation. Multiple cross sections show that channels near bridge crossings in all six study areas are dynamic with many subject to incision and aggradation as well as lateral shifts in thalweg position and bank deposition and erosion. In fluvial reaches, unit bar area declined a net 5.3-83.6 percent from 1939 to 2009. The documented reduction in bar area may be attributable to several factors, including vegetation establishment and stabilization of formerly active bar surfaces, lateral channel changes and resulting alterations in sediment deposition and erosion patterns, and streamflow and/or tide differences between photographs. Other factors that may be associated with the observed reduction in bar area but not assessed in this reconnaissance level study include changes in the sediment and hydrology regimes of these rivers over the analysis period. In tidal reaches, unit bar area increased on the Tillamook and Nehalem Rivers (98.0 and 14.7 percent, respectively), but declined a net 24.2 to 83.1 percent in the other four tidal reaches. Net increases in bar area in the Tidal Tillamook and Nehalem Reaches were possibly attributable to tidal differences between the photographs as well as sediment deposition behind log booms and pile structures on the Tillamook River between 1939 and 1967. The armoring ratio (ratio of the median grain sizes of a bar's surface and subsurface layers) was 1.6 at Lower Waldron Bar on the Miami River, tentatively indicating a relative balance between transport capacity and sediment supply at this location. Armoring ratios, however, ranged from 2.4 to 5.5 at sites on the Trask, Wilson, Kilchis, and Nehalem Rivers; these coarse armor layers probably reflect limited bed-material supply at these sites. On the basis of mapping results, measured armoring ratios, and channel cross section surveys, preliminary conclusions are that the fluvial reaches on the Tillamook, Trask, Kilchis, and Nehalem Rivers are currently sediment supply-limited in terms of bed material - that is, the transport capacity of the channel generally exceeds the supply of bed material. The relation between transport capacity and sediment is more ambiguous for the fluvial reaches on the Wilson and Miami Rivers, but transport-limited conditions are likely for at least parts of these reaches. Some of these reaches have possibly evolved from sediment supply-limited to transport-limited over the last several decades in response to changing basin and climate conditions. Because of exceedingly low gradients, all the tidal reaches are transport-limited. Bed material in these reaches, however, is primarily sand and finer grain-size material and probably transported as suspended load from upstream reaches. These reaches will be most susceptible to watershed conditions affecting the supply and transport of fine sediment. Compared to basins on the southwestern Oregon coast, such as the Chetco and Rogue River basins, these six basins likely transport overall less gravel bed material. Although tentative in the absence of actual transport measurements, this conclusion is supported by the much lower area and frequency of bars and longer tidal reaches along all the northcoast rivers examined in this study. Previous studies suggest that the expansive and largely unvegetated bars visible in the 1939 photographs are primarily associated with voluminous sedimentation starting soon after the first Tillamook Burn fire in 1933. However, USGS studies of temporal bar trends in other Oregon coastal rivers unaffected by the Tillamook Burn show similar declines in bar area over approximately the same analysis period. In the Umpqua and Chetco River basins, historical declines in bar area are associated with long-term decreases in flood magnitude. Other factors may include changes in the type and volume of large wood and riparian vegetation. Further characterization of hydrology patterns in these basins and possible linkages with climate factors related to flood peaks, such as the Pacific Decadal Oscillation, could support inferences of expected future changes in vegetation establishment and channel planform and profile. More detailed investigations of bed-material transport rates and channel morphology would support assessments of lateral and vertical channel condition and longitudinal trends in bed material. Such assessments would be most practical for the fluvial study areas on the Wilson, Kilchis, Miami, and Nehalem Rivers and relevant to several ongoing management and ecological issues pertaining to sand and gravel transport. Tidal reaches may also be logical subjects for indepth analysis where studies would be more relevant to the deposition and transport of fine sediment (and associated channel and riparian conditions and processes) rather than coarse bed material.

Oregon↗
USGS2019

Differentiating sediment sources using sediment fingerprinting techniques, in the Sprague River Basin, South-Central Oregon

Identifying sources of sediment to streams in the Sprague River Basin, in south-central Oregon, is important for restoration efforts that are focused on reducing sediment erosion and transport. Reducing sediment loads in these streams also contributes to compliance with the total maximum daily load reduction requirements for total phosphorus in this basin. In the Sprague River Basin, phosphorus occurs in surface waters in both dissolved phase and particulate phase, and particulate phosphorus is readily transported in streams on fine-grained suspended sediments, which eventually deposit in Upper Klamath Lake. The lake has seasonal blooms of cyanobacteria that require phosphorus for growth and degrade water-quality conditions, violating State water-quality standards and creating conditions that are stressful to two endangered suckers that reside in the lake. Identifying sources of sediment to the Sprague River could help inform restoration actions by determining the principal locations in the basin contributing fine sediment to the river. The U.S. Geological Survey, in cooperation with the U.S. Fish and Wildlife Service, conducted a proof-of-concept study to determine if sediment fingerprinting can differentiate sources of bank erosion by source material, basin, river reach, and soil horizon. The sediment fingerprinting approach uses properties of streambank and streambed sediment to differentiate between multiple sediment sources by determining a composite signature, or fingerprint. The composite fingerprint is established by combining fingerprint properties from laboratory results of elemental analysis, stable isotopes, and total carbon and nitrogen. The methods for differentiating sediment samples for this study include grouping bank and bed samples by basin, river reach, and soil horizon, and using non-parametric statistics to determine which fingerprint properties could be used to differentiate the sample groups. Results indicate that fingerprint properties differentiated source material, river reach, and basin, and were more successful at differentiating samples grouped by geographic location (basin and reach) compared to source material. Source material (banks, bed, levees) were differentiated with three fingerprint properties—Antimony (Sb), copper (Cu), and manganese (Mn). The basin category (South Fork and main-stem Sprague River) differentiated the South Fork and main stem with stable nitrogen isotopes (δ 15 N), aluminum (Al), silicon (Si), and vanadium (V). Specific river reaches within the study area were differentiated with 11 different fingerprint properties. These results can be used for apportionment studies using suspended sediment samples and mixing models to determine sediment source contributions within the basin.

Oregon↗
USGS1991

The Briggs Creek Amphibolite, Klamath Mountains, Oregon: Its origin and dispersal

The Briggs Creek Amphibolite (BCA) in southwestern Oregon is an allochthonous slice of metamorphosed oceanic crust emplaced during the Nevadan orogenic event. Even though the evidence is not clear, the authors prefer to have the protolith for the BCA formed in a back‐arc basin contemporaneously as part of the Josephine Ophiolite during late Callovian to early Oxfordian. Although major rearrangement of some of the chemical elements took place during metamorphism, it is possible, by use of major and rare earth elements, to suggest that the BCA formed in an oceanic spreading centre rather than an island arc setting. Meta‐morphic mineral assemblages and composition of the hornblendes indicate that metamorphism attained amphibolite facies grade. Widespread occurrence of allochthonous blocks of BCA in Western Oregon indicate that its dispersion following metamorphism can be related to the accretionary history of the continental margin. Westward thrusting of these blocks of BCA over the Chetco Arc during the Nevadan orogenic event provided blocks that slid into the outboard active Early Cretaceous trench. These blocks were then incorporated into the downgoing subduction complex and overprinted by high P/T metamorphic assemblages. Tectonic blocks within the Early Cretaceous Otter Point trench melange (Franciscan Complex equivalent) contain amphibolites correlated with the BCA and overprinted by high P/T mineral assemblages.

Oregon↗
USGS1986

Tectonic and magmatic development of the Great Basin of western United States during the late Cenozoic time.

In the later Cainozoic, approx 18 m.y. ago, the first basin and range faulting developed in the central part of the Great Basin, this extensional tectonic system resulting from drag on the North American plate as the Pacific plate moved obliquely to the NW along the San Andreas fault. The northern boundary of the Great Basin at the Snake River plain and W across SE Oregon is the tectonic zone along which the E-W extending Basin and Range province has been moving for the past 18 m.y. In the Great Basin axis a narrow N-trending zone of basalt intruded the crust at the same time that basin and range faulting developed; this belt widens northwards as it approaches the N edge of the Great Basin and becomes diffuse and widespread in SE Oregon and SW Idaho, reaching enormous dimensions in the Columbia Plateau farther N. The basalt, which replaced andesitic igneous activity in the mid-Cainozoic, was produced by widespread partial melting in the upper mantle when the tectonic regime changed from a convergent- and subduction-related system to the extensional basin and range system. The locus of magma generated migration to the E and W margins of the Great Basin simultaneously and, as it migrated, it produced a series of eruptive centres along the N boundary of the Great Basin.-R.A.H.

Modern Geology↗
USGS1969

Willamette Basin Comprehensive Study of Water and Related Land Resources: Appendix B--Hydrology

The study was undertaken to plan for the proper development of water and related land resources of the Willamette Basin in Oregon. Appendix B , along with Appendices A and C, provides supporting data for the functional Appendices D through L. Climate is first discussed, including the climatic significance of geographical features such as the Pacific Ocean, the Columbia Gorge, and the Coast and Cascade Ranges, climatic elements (e.g. , temperature, precipitation, evaporation), and meteorological aspects of major storms--rain, wind, and snow. A description of water resources , their distribution, and their variation at different times are presented. These resources are described in terms of factors influencing the occurrence of water . Specifically reviewed here are surface waters, groundwater, the relationship between surface and groundwater, management programs, and water rights and legal restrictions. Lastly, the adequacy of hydrologic data is reviewed. Statistical and interpretive hydrologic data necessary for broadscale water resources planning are provided. Data assembled are those concerning climate, streamflow, lakes and glaciers, chemical-quality, sediment, stream temperature, and groundwater. Geologic and soils mapping are briefly discussed, and a list of references is provided.

Report↗
USGS1973

Eclogites from southwestern Oregon

Eclogite, high-grade blueschist, and amphibolite blocks occur within the Mesozoic Otter Point Formation of southwestern Oregon and are inferred to have been tectonically emplaced by eastward-directed overthrusting involving Colebrooke Schist and serpentinite. Eclogite from southwestern Oregon is very similar in bulk chemistry and mineralogy to the well-studied eclogite of California. Calculations of phase equilibria at load pressures of 7 and 10 kb and T = 400°C to 550°C suggest that many of the hydrates found in eclogite could have been stable at very low H 2 O fugacities. The lack of lawsonite and the presence of almandine-grossular garnet set a maximum limit on H 2 O fugacity for a given P s -T. Chemically, Group C eclogite from Oregon and California characteristically is nepheline normative and is enriched in normative diopside relative to basaltic compositions. The present chemistry of this eclogite may be the result of metasomatism in an ultramafic environment with low a SiO 2 and high a Ca, but outside the stability field of serpentine. The generally high jadeite content of clinopyroxene from Group C eclogite compared with Group A and Group B eclogite is largely a function of bulk rock chemistry. Crystallization under low a SiO 2 conditions stabilizes jadeite in clinopyroxene at lower P s for a given T.

Oregon↗
USGS2017

Geologic field-trip guide to Mount Shasta Volcano, northern California

The southern part of the Cascades Arc formed in two distinct, extended periods of activity: “High Cascades” volcanoes erupted during about the past 6 million years and were built on a wider platform of Tertiary volcanoes and shallow plutons as old as about 30 Ma, generally called the “Western Cascades.” For the most part, the Shasta segment (for example, Hildreth, 2007; segment 4 of Guffanti and Weaver, 1988) of the arc forms a distinct, fairly narrow axis of short-lived small- to moderate-sized High Cascades volcanoes that erupted lavas, mainly of basaltic-andesite or low-silica-andesite compositions. Western Cascades rocks crop out only sparsely in the Shasta segment; almost all of the following descriptions are of High Cascades features except for a few unusual localities where older, Western Cascades rocks are exposed to view along the route of the field trip. The High Cascades arc axis in this segment of the arc is mainly a relatively narrow band of either monogenetic or short-lived shield volcanoes. The belt generally averages about 15 km wide and traverses the length of the Shasta segment, roughly 100 km between about the Klamath River drainage on the north, near the Oregon-California border, and the McCloud River drainage on the south (fig. 1). Superposed across this axis are two major long-lived stratovolcanoes and the large rear-arc Medicine Lake volcano. One of the stratovolcanoes, the Rainbow Mountain volcano of about 1.5–0.8 Ma, straddles the arc near the midpoint of the Shasta segment. The other, Mount Shasta itself, which ranges from about 700 ka to 0 ka, lies distinctly west of the High Cascades axis. It is notable that Mount Shasta and Medicine Lake volcanoes, although volcanologically and petrologically quite different, span about the same range of ages and bracket the High Cascades axis on the west and east, respectively. The field trip begins near the southern end of the Shasta segment, where the Lassen Volcanic Center field trip leaves off, in a field of high-alumina olivine tholeiite lavas (HAOTs, referred to elsewhere in this guide as low-potassium olivine tholeiites, LKOTs). It proceeds around the southern, western, and northern flanks of Mount Shasta and onto a part of the arc axis. The stops feature elements of the Mount Shasta area in an approximately chronological order, from oldest to youngest.

California↗
USGS2017

Field-trip guides to selected volcanoes and volcanic landscapes of the western United States

The North American Cordillera is home to a greater diversity of volcanic provinces than any comparably sized region in the world. The interplay between changing plate-margin interactions, tectonic complexity, intra-crustal magma differentiation, and mantle melting have resulted in a wealth of volcanic landscapes. Field trips in this guide book collection (published as USGS Scientific Investigations Report 2017–5022) visit many of these landscapes, including (1) active subduction-related arc volcanoes in the Cascade Range; (2) flood basalts of the Columbia Plateau; (3) bimodal volcanism of the Snake River Plain-Yellowstone volcanic system; (4) some of the world’s largest known ignimbrites from southern Utah, central Colorado, and northern Nevada; (5) extension-related volcanism in the Rio Grande Rift and Basin and Range Province; and (6) the eastern Sierra Nevada featuring Long Valley Caldera and the iconic Bishop Tuff. Some of the field trips focus on volcanic eruptive and emplacement processes, calling attention to the fact that the western United States provides opportunities to examine a wide range of volcanological phenomena at many scales. The 2017 Scientific Assembly of the International Association of Volcanology and Chemistry of the Earth’s Interior (IAVCEI) in Portland, Oregon, was the impetus to update field guides for many of the volcanoes in the Cascades Arc, as well as publish new guides for numerous volcanic provinces and features of the North American Cordillera. This collection of guidebooks summarizes decades of advances in understanding of magmatic and tectonic processes of volcanic western North America. These field guides are intended for future generations of scientists and the general public as introductions to these fascinating areas; the hope is that the general public will be enticed toward further exploration and that scientists will pursue further field-based research.

Scientific Investigations Report↗
USGS2014

Results to be expected from resistivity‐measurements

The work described in this paper was all done in connection with dam‐site investigations and was not directly connected with hydrology. However, geophysics is coming to have a place in hydrologic investigations, and these results may throw some light on what can be accomplished by resistivity‐measurements. We have found that,for many questions not involving exact determinations of depth, resistivity‐ measurements give conclusive answers. Ordinarily a reliable answer can be expected to the question of the existence of a buried channel if the covering is composed of unconsolidated material with a resistivity differing from that of the rock. For example, topographic surveys were made at two alternative dam‐sites on a river about four miles apart. Examination of the surface‐geology indicated that a channel burled under glacial debris possibly existed at each site, but resistivity‐measurements proved that such a channel existed at one site and not at the other. On the other hand, at another site the geologist suspected there might be an old channel on a steep side hill. Geophysical measurements showed a depth of overburden of 46 feet and showed that if a deeper channel exists it must be narrow; but they did not show positively that no such channel exists. Probably a careful survey with a large number of lines would have given a more definite answer, but the rough topography interfered with the resistivity‐work, and time and money were not available for a detailed survey. After completion of the geophysical work, the geologist located some outcrops which led him to conclude that no old channel exists at this site. At two other dam‐sites in Oregon resistivity‐measurements showed that there were no burled channels.

Eos, Transactions, American Geophysical Union↗
USGS2006

The National Assessment of Shoreline Change: A GIS compilation of vector shorelines and associated shoreline change data for the sandy shorelines of the California coast

Introduction The Coastal and Marine Geology Program of the U.S. Geological Survey has generated a comprehensive data clearinghouse of digital vector shorelines and shoreline change rates for the sandy shoreline along the California open coast. These data, which are presented herein, were compiled as part of the U.S. Geological Survey's National Assessment of Shoreline Change Project. Beach erosion is a chronic problem along many open-ocean shores of the United States. As coastal populations continue to grow and community infrastructures are threatened by erosion, there is increased demand for accurate information including rates and trends of shoreline migration. There is also a critical need for shoreline change data that is consistent from one coastal region to another. One purpose of this work is to develop standard, repeatable methods for mapping and analyzing shoreline movement so that periodic, systematic, and internally consistent updates of shorelines and shoreline change rates can be made at a National Scale. This data compilation for open-ocean, sandy shorelines of the California coast is one in a series that already includes the Gulf of Mexico and the Southeast Atlantic Coast (Morton et al., 2004; Morton et al., 2005) and will eventually cover Washington, Oregon, and parts of Hawaii and Alaska. Short- and long-term shoreline change evaluations are determined by comparing the positions of three historical shorelines digitized from maps, with a modern shoreline derived from LIDAR (light detection and ranging) topographic surveys. Historical shorelines generally represent the following time-periods: 1850s-1880s, 1920s-1930s, and late 1940s-1970s. The most recent shoreline is from data collected between 1997 and 2002. Long-term rates of change are calculated by linear regression using all four shorelines. Short-term rates of change are end-point rate calculations using the two most recent shorelines. Please refer to our full report on shoreline change of the California coastline at http://pubs.usgs.gov/of/2006/1219/ for additional information regarding methods and results (Hapke et al., 2006). Data in this report are organized into downloadable layers by region (Northern, Central and Southern California) and are provided as vector datasets with metadata. Vector shorelines may represent a compilation of data from one or more sources and these sources are included in the dataset metadata. This project employs the Environmental Systems Research Institute's (ESRI) ArcGIS as it's GIS mapping tool and contains several data layers (shapefiles) that are used to create a geographic view of the California Coast. These vector data form a basemap comprised of polygon and line themes that include a U.S. coastline (1:80,000), U.S. cities, and state boundaries.

California↗
USGS2003

Development of health-based screening levels for use in state- or local-scale water-quality assessments

The U.S. Geological Survey (USGS) has a need to communicate the significance of the water-quality findings of its National Water-Quality Assessment (NAWQA) Program in a human-health context. Historically, the USGS has assessed water-quality conditions by comparing water concentration data against established drinking-water standards and guidelines. However, because drinking- water standards and guidelines do not exist for many of the contaminants analyzed by the NAWQA Program and other USGS studies, this approach has proven to be insufficient for placing USGS data in a human-health context. To help meet this need, health-based screening level (HBSL) concentrations or ranges are being determined for unregulated compounds (that is, those for which Federal or State drinking-water standards have not been established), using a consensus approach that was developed collaboratively by the USGS, U.S. Environmental Protection Agency(USEPA), New Jersey Department of Environmental Protection, and Oregon Health & Science University. USEPA Office of Water methodologies for calculating Lifetime Health Advisory and Risk-Specific Dose values for drinking water are being used to develop HBSL concentrations (for unregulated noncarcinogens) and HBSL concentration ranges (for most unregulated carcinogens). This report describes the methodologies used to develop HBSL concentrations and ranges for unregulated compounds in State- and local-scale analyses, and discusses how HBSL values can be used as tools in water-quality assessments. Comparisons of measured water concentrations with Maximum Contaminant Level values and HBSL values require that water-quality data be placed in the proper context, with regard to both hydrology and human health. The use of these HBSL concentrations and ranges by USGS will increase by 27 percent the number of NAWQA contaminants for which health-based benchmarks are available for comparison with USGS water-quality data. USGS can use HBSL values to assist the USEPA and State and local agencies by providing them with comparisons of measured water concentrations to scientifically defensible human health-based benchmarks, and by alerting them when measured concentrations approach or exceed these benchmarks.

Water-Resources Investigations Report↗
USGS1998

MAS/MILS Arc/Info point coverage for the western U.S. (excluding Hawaii)

The U.S. Geological Survey has two international and one regional digital database that contains information on mineral properties. This report describes the conversion of selected data from one of the international databases - MAS/MILS (Mineral Availability System/Mineral Industry Location System) - into a spatial data product. The MAS/MILS database, obtained from the U.S. Bureau of Mines (USBM) upon its closure, contains over 221,000 records of mineral properties and processing facilities throughout the world. However, the majority of the records in the database are of sites located in the western U.S. This is due to the extensive mineral activity that has occurred in the West, and the work done by mineral professionals in the Western, Alaska, and Intermountain Field Operations Centers of the USBM. The purpose of this project was to create a spatial coverage of the western U.S. containing mineral resource information. This coverage includes information for the states of Alaska, Arizona, California, Colorado, Idaho, Montana, Nevada, New Mexico, Oregon, Utah, Washington, and Wyoming. For this report, locations from MAS/MILS were converted to a point coverage using a geographic information system (GIS). All work was done using Arc/Info v. 7.0.4. There are 128,441 points in the coverage.

Alaska, Arizona, California, Colorado, Idaho, Mont↗
USGS2003

Searching for an electrical-grade geothermal resource in Northern Arizona to help geopower the west

The U.S Department of Energy s "Geopowering the West" initiative seeks to double the number of states (currently 4) that generate geothermal electric power over the next few years. Some states, like New Mexico and Oregon, have plentiful and conspicuous geothermal manifestations, and are thus likely to further DOE's goal relatively easily. Other states, including Arizona, demonstrate less geothermal potential, but nevertheless have sites worthy of additional investigation. The Arizona site with greatest potential is near Sunset Crater, a basaltic volcano less than 1,000 years old several kilometers northeast of Flagstaff. Several silicic volcanoes nearby are young enough to have still-hot intrusive roots. Moreover, there is geophysical evidence for magma or hot rock in middle to lower crust beneath the area. A high level of interest in this area by the geothermal industry during the 1970s waned because surface thermal indicators, such as high heat flow, hot springs, and fumaroles are absent. The absence of these features is probably the result of a well-documented deep and pervasive regional aquifer, which likely creates a thermal barrier to the rise of hydrothermal activity from depth, Surface based geological and geophysical studies are under way to evaluate further the geothermal potential of the area and to locate a site for a drill hole to explore for a hydrothermal system beneath the ground-water barrier.

California, Nevada↗
USGS1970

A re-evaluation of basalt-obsidian relations at East Lake Fissure, Newberry Caldera, Oregon

Andesite scoria, agglutinate, and small flows formed by thin lava gushes that erupted from East Lake Fissure on the north wall of Newberry Caldera carry numerous inclusions of platy rhyolite, partly melted platy rhyolite, and frothy obsidian. This association of obsidian and “basalt” has been interpreted as the result of intermingling of mafic and siliceous magmas. The locality has been repeatedly cited as an example of a mixed intrusion of the “basalt-rhyolite association.” Field, petrographic, chemical, and experimental evidence suggest, however, that the inclusions of frothy and massive obsidian are melted fragments of platy rhyolite which were ripped from a rhyolite unit forming part of the caldera wall by uncontaminated andesite magma which rose and fountained from the fissure.

Oregon↗
USGS2014

Gravity, magnetic, and radiometric data for Newberry Volcano, Oregon, and vicinity

Newberry Volcano in central Oregon is a 3,100-square-kilometer (1,200-square-mile) shield-shaped composite volcano, occupying a location east of the main north-south trend of the High Cascades volcanoes and forming a transition between the High Lava Plains subprovince of the Basin and Range Province to the east and the Cascade Range to the west. Magnetic, gravity, and radiometric data have been gathered and assessed for the region around the volcano. These data have widely varying quality and resolution, even within a given dataset, and these limitations are evaluated and described in this release. Publicly available gravity data in general are too sparse to permit detailed modeling except along a few roads with high-density coverage. Likewise, magnetic data are also unsuitable for all but very local modeling, primarily because available data consist of a patchwork of datasets with widely varying line-spacing. Gravity data show only the broadest correlation with mapped geology, whereas magnetic data show moderate correlation with features only in the vicinity of Newberry Caldera. At large scales, magnetic data correlate poorly with both geologic mapping and gravity data. These poor correlations are largely due to the different sensing depths of the two potential fields methods, which respond to physical properties deeper than the surficial geology. Magnetic data derive from rocks no deeper than the Curie-point isotherm depth (10 to 15 kilometers, km, maximum), whereas gravity data reflect density-contrasts to 100 to 150 km depths. Radiometric data from the National Uranium Resource Evaluation (NURE) surveys of the 1980s have perhaps the coarsest line-spacing of all (as much as 10 km between lines) and are extremely “noisy” for several reasons inherent to this kind of data. Despite its shallow-sensing character, only a few larger anomalies in the NURE data correlate well with geologic mapping. The purpose of this data series release is to collect and place the available geophysical data in the hands of other investigators in a readily comprehensible form. All data-compilation, splicing, filtering, and overlay-map displays were accomplished with the commercial Geosoft™ system, Advanced Option. Images are provided in both JPG and PDF formats.

Oregon↗
USGS1980

Depositional environments of some Pleistocene coastal terrace deposits, southwestern Oregon - case history of progradational beach and dune sequence.

These deposits comprise a basal gravelly unit and 3 overlying sandy units, each with mud beds, a paleosol, or the modern soil in its uppermost part. The gravelly unit is interpreted as a progradational deposit. The main parts of the sandy units are made up of 1) a crossbedded sand facies, the dominant structure in which is medium-scale crossbedding (interpreted as the product of small eolian dunes), and 2) an irregularly bedded sand facies, which is locally pebbly and is dominated by scour-and-fill structures, interpreted as deposits of interdune ephemeral streams, ephemeral ponds, and wet to dry subaerial flats. The mud beds and paleosols represent times of temporary stabilization of the dune field.- from Author

Sedimentary Geology↗
USGS2020

Juvenile Lost River and shortnose sucker year-class formation, survival, and growth in Upper Klamath Lake, Oregon and Clear Lake Reservoir, California—2017 Monitoring Report

Executive Summary Populations of federally endangered Lost River ( Deltistes luxatus ) and shortnose suckers ( Chasmistes brevirostris ) in Upper Klamath Lake, Oregon, and Clear Lake Reservoir (hereinafter referred to as Clear Lake; fig. 1), California, are experiencing long-term declines in abundance. Upper Klamath Lake populations are decreasing because juvenile suckers are not surviving and recruiting into the adult population. Most juvenile sucker mortality occurs within the first year of life in Upper Klamath Lake. Annual production of juvenile suckers in Clear Lake appear to be highly variable and may not occur at all in very dry years. However, juvenile sucker survival is much higher in Clear Lake, with some suckers surviving to join spawning aggregations. Long-term monitoring of juvenile sucker populations is needed to 1) determine if there are annual and species-specific differences in production, survival, and growth; 2) better understand when juvenile sucker mortality is greatest; 3) help identify potential causes of high juvenile sucker mortality particularly in Upper Klamath Lake; and 4) monitor for successful juvenile survival in Upper Klamath Lake. The U.S. Geological Survey (USGS) began a summer juvenile sucker monitoring program in 2015 to track cohorts over time in Upper Klamath and Clear Lakes. The juvenile sucker monitoring program involved using trap net data at fixed sites to determine the status of juvenile suckers. Annual variability in apparent age-0 sucker production, juvenile sucker survival, and growth were tracked. Using genetic markers, suckers were classified as one of three taxa; shortnose (combinations of shortnose and Klamath largescale suckers), Lost River, or suckers with genetic markers of both species (Intermediate [Prob]). By using catch data, we generated taxa-specific indices of year-class strength, August–September apparent survival, and overwinter apparent survival. We also examined the prevalence and severity of afflictions such as parasites, wounds, and deformities. The Upper Klamath Lake year-class strength indices for both Lost River and shortnose suckers were slightly lower in 2015 and 2017 than in 2016. The ratios of age-0 Lost River suckers to age-0 shortnose suckers captured in August in Upper Klamath Lake were low in 2015 and 2017, given that adult Lost River suckers are more abundant and more fecund than adult shortnose suckers. This may indicate lower egg, larval, or juvenile survival or poorer spawning success for Lost River suckers than shortnose suckers in these two years. Apparent relative age-0 survival indices for Lost River suckers from August to September in Upper Klamath Lake were greater in 2015 (0.29) than in 2016 (0.16) or 2017 (0.14). Age-0 shortnose sucker catch rates increased between August and September in 2015, possibly indicating new individuals of this species were still recruiting to the lake between the two sampling periods. August to September relative survival indices for Upper Klamath Lake shortnose suckers were 0.35 in 2016 and 0.00 in 2017. We predicted year-class strength would be greater in Clear Lake in years when high spring-time lake elevations and instream flow allowed adult suckers access to spawning habitat in the Willow Creek drainage. Instream flows and lake elevations were sufficient to allow adult suckers to access Willow Creek during the 2016 and 2017 spawning seasons, and age-0 suckers were detected in Clear Lake both years. Higher lake surface elevations and instream flows in 2017 than in 2016 were not associated with higher year-class strength indices in 2017 than in 2016. Low lake surface elevations appeared to limit access by adults to Willow Creek during the 2014 and 2015 spawning seasons and age-0 suckers were not detected in Clear Lake during these years. Nineteen shortnose suckers from the 2014 cohort were captured in Clear Lake in 2017. A 2015 cohort of shortnose suckers was captured as age-1 in 2016 and as age-2 in 2017. The most likely explanation for increasing catch rates of the 2015 cohort is that the higher Willow Creek flows in 2016 and 2017 facilitated the movement of stream-resident suckers, spawned in 2014 and 2015 downstream into Clear Lake. Due to uncertainty in the genetic identification of non-Lost River suckers, these fish are equally likely to be Klamath largescale or shortnose suckers (Hoy and Ostberg, 2015).

California, Oregon↗