Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Geologic Map Series”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52Linked to original sources
USGS2007

Ground water flow modeling with sensitivity analyses to guide field data collection in a mountain watershed

In mountain watersheds, the increased demand for clean water resources has led to an increased need for an understanding of ground water flow in alpine settings. In Prospect Gulch, located in southwestern Colorado, understanding the ground water flow system is an important first step in addressing metal loads from acid-mine drainage and acid-rock drainage in an area with historical mining. Ground water flow modeling with sensitivity analyses are presented as a general tool to guide future field data collection, which is applicable to any ground water study, including mountain watersheds. For a series of conceptual models, the observation and sensitivity capabilities of MODFLOW-2000 are used to determine composite scaled sensitivities, dimensionless scaled sensitivities, and 1% scaled sensitivity maps of hydraulic head. These sensitivities determine the most important input parameter(s) along with the location of observation data that are most useful for future model calibration. The results are generally independent of the conceptual model and indicate recharge in a high-elevation recharge zone as the most important parameter, followed by the hydraulic conductivities in all layers and recharge in the next lower-elevation zone. The most important observation data in determining these parameters are hydraulic heads at high elevations, with a depth of less than 100 m being adequate. Evaluation of a possible geologic structure with a different hydraulic conductivity than the surrounding bedrock indicates that ground water discharge to individual stream reaches has the potential to identify some of these structures. Results of these sensitivity analyses can be used to prioritize data collection in an effort to reduce time and money spend by collecting the most relevant model calibration data.

Groundwater Monitoring & Remediation↗
USGS1952

Geology of the Quartz Creek Pegmatite District, Gunnison County Colorado

The Quartz Creek pegmatite district includes an area about 29 square miles in the vicinity of Quartz Creek in Gunnison County,. Colo. This area contains 1,803 pegmatites that are intruded into pre-Cambrian rocks. The rocks exposed in the district range in age from pre-Cambrian to Recent. The oldest pre-Cambrian rocks are chiefly quartzites interbedded with a few arkoses and conglomerates. These rocks are surrounded by more abundant hornblende gneiss and tonalite. A small body of biotite tonalite was intruded and two thin layers of dacitic pillow lava were extruded into this series. The hornblende gneiss and tonalite have the same composition and differ only in texture. The older material (hornblende gneiss) has a well-marked lineation, whereas the younger (tonalite) is equigranular. Subsequently, a large body of quartz monzonite was intruded along the northern boundary of the mapped area. Later, coarse-grained granite was intruded into the southern part of the area. Dikes of fine-grained granite cut the coarse-grained variety. The last period of intrusive activity in pre-Cambrian time is marked by a large number of pegmatites. The pre-Cambrian rocks were tilted and eroded, and the flatlying Jurassic Morrison formation was deposited on the irregular surface. This formation is conformably overlain by the Cretaceous Dakota sandstone. Faulting produced a vertical offset of 410 feet in the Mesozoic sediments along the only large fault in the area. At the end of Mesozoic time there was another period of erosion. Tertiary (?) tuff is exposed in small, scattered areas in the southern part of the district. It overlies both the Dakota sandstone and pre-Cambrian formations. Glacial till occurs along the edges of Quartz Creek and Wood Gulch. Quaternary alluvium fills the valley bottoms. Although the composition of the country rock has little effect on the shape of the pegmatites, the foliation imposed on this rock has a localizing effect and in part controls the ultimate shape of pegmatites. Zoned and related internal structures are not well developed in the pegmatites of this region. Many of the pegmatites are homogeneous and those that are zoned usually contain a large wall zone and small discontinuous cores. In addition to the more common homogeneous and zoned pegmatites, 7 percent of the pegmatites show a layered structure of textural and mineralogical units not repeated on the opposite side of the pegmatite. Other internal structural units include pegmatites which vary in composition along strike, multiple or “line-rock pegmatites” and fracture fillings. The mineralogy of the pegmatites is described in detail. Specific attention was given to most of the 27 observed minerals. A study of the index of refraction of 439 specimens of plagioclase showed that the variation from zone to zone and layer to layer is minor and that there is no systematic variation in respect to the entire district. No correlation could be found between the refractive index of plagioclase in the pegmatites and the type country rock, or the presence of various accessory minerals. Index of refraction determinations on 95 specimens of muscovite showed no constant variation from wall zone to core or from layer to layer. Curved muscovite has identical optical properties with the flat variety. The index of refraction was determined for 189 beryl specimens. The beryl in the pegmatites containing only a wall zone and a core showed no difference between zones, but in pegmatites that have intermediate zones, the indices of refraction of the beryl showed an inward increase in the alkali content from the contact. Beryl occurs with almost all of the pegmatite minerals and is not restricted in its mineral associations. Tourmaline, except the black variety, is associated with lepidolite. Dark green and blue tourmaline is found in the outer zones of pegmatites containing lepidolite, and the pink and light green varieties are found in direct contact with lepidolite. Lepidolite occurs in aggregates of fine grains, in flat plates, and in curved plates; the three varieties are optically identical. The lighter-colored varieties have higher indices of refraction and contain less lithia than the darker varieties. In addition, the occurrence of the following minerals is described in detail: perthite, quartz, martite, biotite, garnet, columbite-tantalite, monazite, microlite, topaz, gahnite, allanite, and an unidentified mineral. The lack of alteration in the wall rocks adjacent to the pegmatites is interpreted as indicating that the original pegmatite magma did not have an excess of materials such as B, OH-, and P that are needed to form alteration minerals. Because of their low concentration, the above materials were available only in the pegmatitic magma during its crystallization. Pegmatites that contain the rare minerals such as beryl, tourmaline, curved muscovite, biotite, magnetite, monazite, columbite-tantalite, cleavelandite, topaz, lepidolite, and microlite show a grouping in clusters within the district. Beryl-bearing pegmatites occur most abundantly in hornblende gneiss and are only rarely found in either granite or quartz monzonite. The types of minerals that form in a pegmatite appear to be determined by the character of the material segregated from the original magma and the period in which it segregated. The elements escape at one period and may be from only-a specific pocket in the magma. These liquids tend to form groups of pegmatites in which the later bodies contain a high proportion of volatiles. Inferred reserves of the district are estimated for beryl, scrap mica, both hand-cobbing and milling feldspar, lepidolite, columbite-tantalite, topaz, monazite, and microlite. No sheet mica was found. Reserves are small and transportation costs are high so substantial production of low-priced feldspar and scrap mica will depend on the adoption of economica milling techniques for recovering the large quantities of feldspar available. Beryl is irregularly distributed and its recovery as a byproduct will depend on the establishment of a stable market for feldspar and scrap mica. Lepidolite reserves are small low grade.

Colorado↗
USGS2004

Digital data to support development of a pesticide management plan for the Standing Rock Indian Reservation, Sioux County, North Dakota, and Corson County, South Dakota

As part of a program to support development of pesticide management plans for Indian Reservations, the U.S. Geological Survey has been working in cooperation with the U.S. Environmental Protection Agency to make selected information available to the Tribes or in a format easier for the Tribes to use. As a result of this program, four digital data sets related to the geology or hydrology of the Standing Rock Indian Reservation were produced as part of this report. The digital data sets are based on maps published in 1982 at the 1:250,000 scale in "Geohydrology of the Standing Rock Indian Reservation, North and South Dakota," U.S. Geological Survey Hydrologic Investigations Atlas HA-644 by L.W. Howells. The digital data sets were created by 1) scanning the appropriate map to create an image file, 2) registering the image file to real-world coordinates, 3) creating a new image file rectified to real-world coordinates, and 4) digitizing of the features of interest using the rectified image as a guide. As digital data sets, the information can be used in a geographic information system in combination with other information to help develop a pesticide management plan.

Data Series↗
USGS2012

High-resolution digital elevation dataset for Crater Lake National Park and vicinity, Oregon, based on LiDAR survey of August-September 2010 and bathymetric survey of July 2000

Crater Lake partially fills the caldera that formed approximately 7,700 years ago during the eruption of a 12,000-foot volcano known as Mount Mazama. The caldera-forming or climactic eruption of Mount Mazama devastated the surrounding landscape, left a thick deposit of pumice and ash in adjacent valleys, and spread a blanket of volcanic ash as far away as southern Canada. Because the Crater Lake region is potentially volcanically active, knowledge of past events is important to understanding hazards from future eruptions. Similarly, because the area is seismically active, documenting and evaluating geologic faults is critical to assessing hazards from earthquakes. As part of the American Recovery and Reinvestment Act (ARRA) of 2009, the U.S. Geological Survey was awarded funding for high-precision airborne LiDAR ( Li ght D etection A nd R anging) data collection at several volcanoes in the Cascade Range through the Oregon LiDAR Consortium, administered by the Oregon Department of Geology and Mineral Industries (DOGAMI). The Oregon LiDAR Consortium contracted with Watershed Sciences, Inc., to conduct the data collection surveys. Collaborating agencies participating with the Oregon LiDAR Consortium for data collection in the Crater Lake region include Crater Lake National Park (National Park Service) and the Federal Highway Administration. In the immediate vicinity of Crater Lake National Park, 798 square kilometers of LiDAR data were collected, providing a digital elevation dataset of the ground surface beneath forest cover with an average resolution of 1.6 laser returns/m 2 and both vertical and horizontal accuracies of ±5 cm. The LiDAR data were mosaicked in this report with bathymetry of the lake floor of Crater Lake, collected in 2000 using high-resolution multibeam sonar in a collaborative effort between the U.S. Geological Survey, Crater Lake National Park, and the Center for Coastal and Ocean Mapping at the University of New Hampshire. The bathymetric survey collected 16 million soundings with a spatial resolution of 2 meters using an EM1002 system owned and operated by C&C Technologies, Inc. The combined LiDAR and bathymetric dataset has a cell size of 1 meter and will contribute to understanding past volcanic events and their deposits, recognizing of faults and volcanic landforms, and quantifying landscape modification during and after the next volcanic eruption at Crater Lake.

Oregon↗
USGS2003

The Long Valley Caldera GIS database

This database provides an overview of the studies being conducted by the Long Valley Observatory in eastern California from 1975 to 2001. The database includes geologic, monitoring, and topographic datasets related to Long Valley caldera. The CD-ROM contains a scan of the original geologic map of the Long Valley region by R. Bailey. Real-time data of the current activity of the caldera (including earthquakes, ground deformation and the release of volcanic gas), information about volcanic hazards and the USGS response plan are available online at the Long Valley observatory web page (http://lvo.wr.usgs.gov). If you have any comments or questions about this database, please contact the Scientist in Charge of the Long Valley observatory.

Data Series↗
USGS1991

Major results of gravity and magnetic studies at Yucca Mountain, Nevada

About 4,000 gravity stations have been obtained at Yucca Mountain and vicinity since the beginning of radioactive-waste studies there in 1978. These data have been integrated with data from about 29,000 stations previously obtained in the surrounding region to produce a series of Bouguer and isostatic-residual-gravity maps of the Nevada Test Site and southeastern Nevada. Yucca Mountain is characterized by a WNW-dipping gravity gradient whereby residual values of -10 mGal along the east edge of Yucca Mountain decrease to about -38 mGal over Crater Flat. Using these gravity data, two-dimensional modeling predicted the depth to pre-Cenozoic rocks near the proposed repository to be about 1,220??150 m, an estimate that was subsequently confirmed by drilling to be 1,244 m. Three-dimensional modeling of the gravity low over Crater Flat indicates the thickness of Cenozoic volcanic rocks and alluvial cover to be about 3,000 m. Gravity interpretations also identified the Silent Canyon caldera before geologic mapping of Pahute Mesa and provided an estimate of the thickness of the volcanic section there of nearly 5 km.

Conference Paper↗
USGS2019

Seismic design and hazard maps: Before and after

The 1994 Northridge earthquake generated world-record ground motions. At the time, the horizontal peak ground acceleration of 1.8 g measured by a seismometer in Tarzana was the largest ever. The same is true of the peak ground velocity of 148 cm/s measured in Granada Hills. Both measurements were within approximately 15 km of the source of the earthquake; they were also near most of the damage described in other articles of this series. Consequently, the near-source design forces from the seismic zone maps in the Uniform Building Code (UBC) were increased. From the 1994 to 1997 editions, acceleration- and velocity-related near-source factors were introduced. The factors increased the design forces in Zone 4, already the highest seismic zone, by a multiplier as large as 2.0. More enduringly, generational changes were made to the seismic design maps in the NEHRP Recommended Seismic Provisions for New Buildings and Other Structures . The NEHRP maps were – and continue to be – adopted into the International Building Code (IBC), which supplanted the UBC and other model building codes. As described below, the changes to the NEHRP maps took advantage of another post-Northridge change: the modern generation of U.S. Geological Survey (USGS) National Seismic Hazard Maps.

Structure↗
USGS1990

Major geohydrologic units in and adjacent to the Ozark Plateaus province, Missouri, Arkansas, Kansas and Oklahoma: Ozark aquifer

An investigation of the geohydrologic system in the Ozark Plateaus province (index map and Fenneman, 1938) has been made as part of the Central Midwest Regional Aquifer-System Analysis (Jorgenson and Signor, 1981), a major study that encompasses parts of 10 States. The study is one of several by the U.S. Geological Survey that are designed to increase knowledge of the flow regime and geohydrologic properties of regional aquifer systems in the United States. Because a large quantity of fresh groundwater is available in aquifers underlying the Ozark Plateaus province, a subregional project has been established to study the geohydrologic units of this area in more detail than is practical in the regional study. The stratigraphic relationship among the primary geohydrologic units in the Ozark Plateaus province is discussed in Chapter A of this Hydrologic Investigations Atlas series. This chapter focuses on the Ozark aquifer, a geohydrologic unit within the Ozark Plateaus aquifer system underlying the Ozark Plateaus province.

Arkansas, Kansas, Missouri, Oklahoma↗
USGS1993

Geohydrologic systems in Kansas — Geohydrology of the lower aquifer unit in the western interior plains aquifer system

The purpose of the investigation is to provide a description of the principal geohydrologic systems in Upper Cambrian through Lower Cretaceous rocks in Kansas. This investigation was made as part of the Central Midwest Regional Aquifer-System Analysis (CMRASA). The CMRASA is one of several major investigations by the U.S. Geological Survey of regional aquifer systems in the United States. These regional investigations are designed to increase knowledge of the flow regime and hydrologic properties of major aquifer systems and to provide quantitative information for the assessment, development, and management of water supplies. The CMRASA study area includes all or parts of 10 Central Midwestern States (Jorgensen and Signor, 1981), as shown of the envelope cover. This Hydrologic Investigations Atlas, which consists of a series of chapters, presents a description of the physical framework and geohydrology of principal aquifers and confining systems in Kansas. Chapter H presents the geohydrology of the upper aquifer unit in the Western Interior Plains aquifer system. The physical framework of the aquifer system in relation to other systems is described by maps and sections showing areal extent and the thickness of rocks that compose the unit. The physical framework of the upper aquifer unit is described in detail in chapter D of the atlas (Hansen and others, in press). The hydrology of the system in relation to that of other systems is described in this chapter by maps showing the altitude of fluid levels and the direction of water movement within the unit. The chemical composition of water in the system is described by maps that show the distribution of dissolved-solids concentrations and the differences in water types on the basis of principal chemical constituents. Chapter A of this atlas series (Wolf and others, 1990) describes the relation of principal geohydrologic systems in Kansas and presents a more detailed discussion of the methods and data used to prepare and ensure consistency among the sets of maps.

Kansas↗
USGS2006

The National Assessment of Shoreline Change: A GIS compilation of vector shorelines and associated shoreline change data for the sandy shorelines of the California coast

Introduction The Coastal and Marine Geology Program of the U.S. Geological Survey has generated a comprehensive data clearinghouse of digital vector shorelines and shoreline change rates for the sandy shoreline along the California open coast. These data, which are presented herein, were compiled as part of the U.S. Geological Survey's National Assessment of Shoreline Change Project. Beach erosion is a chronic problem along many open-ocean shores of the United States. As coastal populations continue to grow and community infrastructures are threatened by erosion, there is increased demand for accurate information including rates and trends of shoreline migration. There is also a critical need for shoreline change data that is consistent from one coastal region to another. One purpose of this work is to develop standard, repeatable methods for mapping and analyzing shoreline movement so that periodic, systematic, and internally consistent updates of shorelines and shoreline change rates can be made at a National Scale. This data compilation for open-ocean, sandy shorelines of the California coast is one in a series that already includes the Gulf of Mexico and the Southeast Atlantic Coast (Morton et al., 2004; Morton et al., 2005) and will eventually cover Washington, Oregon, and parts of Hawaii and Alaska. Short- and long-term shoreline change evaluations are determined by comparing the positions of three historical shorelines digitized from maps, with a modern shoreline derived from LIDAR (light detection and ranging) topographic surveys. Historical shorelines generally represent the following time-periods: 1850s-1880s, 1920s-1930s, and late 1940s-1970s. The most recent shoreline is from data collected between 1997 and 2002. Long-term rates of change are calculated by linear regression using all four shorelines. Short-term rates of change are end-point rate calculations using the two most recent shorelines. Please refer to our full report on shoreline change of the California coastline at http://pubs.usgs.gov/of/2006/1219/ for additional information regarding methods and results (Hapke et al., 2006). Data in this report are organized into downloadable layers by region (Northern, Central and Southern California) and are provided as vector datasets with metadata. Vector shorelines may represent a compilation of data from one or more sources and these sources are included in the dataset metadata. This project employs the Environmental Systems Research Institute's (ESRI) ArcGIS as it's GIS mapping tool and contains several data layers (shapefiles) that are used to create a geographic view of the California Coast. These vector data form a basemap comprised of polygon and line themes that include a U.S. coastline (1:80,000), U.S. cities, and state boundaries.

California↗
USGS2014

Digital topographic data based on lidar survey of Mount Shasta Volcano, California, July-September 2010

The most voluminous of the Cascade volcanoes, northern California’s Mount Shasta, is a massive compound stratovolcano composed of at least four main edifices constructed over a period of at least 590,000 years. An ancestral Shasta volcano was destroyed by Earth’s largest known Quaternary subaerial debris avalanche, which filled Shasta Valley, northwest of the volcano. The Hotlum cone, forming the present summit, the Shastina lava dome complex, and the Black Butte lava dome on the southwest flank, were constructed during the early Holocene. As part of the American Recovery and Reinvestment Act (ARRA) of 2009, the U.S. Geological Survey was awarded funding for high-precision airborne lidar (light detection and ranging) data collection at several volcanoes in the Cascade Range. Data collection was arranged by the Oregon Lidar Consortium, administered by the Oregon Department of Geology and Mineral Industries (DOGAMI). The Oregon Lidar Consortium contracted with Watershed Sciences, Inc., to collect 1,220 square km of high-precision airborne lidar data. These data provide a digital map of the ground surface beneath forest cover with horizontal resolution of 1 m (average of 1.82 ground laser returns per square meter) and estimated vertical accuracy of ±4 centimeters (1 sigma), and horizontal accuracies of ±1.5 centimeters. These data will contribute to monitoring and description of natural hazards, the study of regional geology and volcanic landforms, and analysis of landscape modification during and after the next volcanic eruption at Mount Shasta. Survey Bounding Coordinates: West Bounding Coordinate: −122.438774 East Bounding Coordinate: −121.888382 North Bounding Coordinate: 41.564495 South Bounding Coordinate: 41.126339

California↗
USGS2004

The National Assessment of Shoreline Change: A GIS Compilation of Vector Shorelines and Associated Shoreline Change Data for the U.S. Gulf of Mexico

Introduction The Coastal and Marine Geology Program of the U.S. Geological Survey has generated a comprehensive database of digital vector shorelines and shoreline change rates for the U.S. Gulf of Mexico. These data, which are presented herein, were compiled as part of the U.S. Geological Survey's National Assessment of Shoreline Change Project. Beach erosion is a chronic problem along most open-ocean shores of the United States. As coastal populations continue to grow and community infrastructures are threatened by erosion, there is increased demand for accurate information including rates and trends of shoreline migration. There is also a critical need for shoreline change data that is consistent from one coastal region to another. One purpose of this work is to develop standard repeatable methods for mapping and analyzing shoreline movement so that periodic updates regarding coastal erosion and land loss can be made nationally that are systematic and internally consistent. This data compilation for open-ocean, sandy shorelines of the Gulf of Mexico is the first in a series that will eventually include the Atlantic Coast, Pacific Coast, and parts of Hawaii and Alaska. Short- and long-term shoreline change evaluations are based on merging three historical shorelines with a modern shoreline derived from lidar (light detection and ranging) topographic surveys. Historical shorelines generally represent the following time periods: 1800s, 1920s-1930s, and 1970s. The most recent shoreline is derived from data collected over the period of 1998-2002. Long-term rates of change are calculated by linear regression using all four shorelines. Short-term rates of change are simple end-point rate calculations using the two most recent shorelines. Please refer to our full report on shoreline change in the Gulf of Mexico, National Assessment of Shoreline Change: Part 1, Historical Shoreline Changes and Associated Coastal Land Loss Along the U.S. Gulf of Mexico (USGS Open File Report 2004-1043) for additional information regarding methods and results. Data in this report are organized into data layers by state and are provided as single-point vector datasets with metadata. Vector shorelines may represent a compilation of data from one or more sources and these sources are attributed in the dataset. All data are intended to be GIS-ready inasmuch as the data should not require any additional cleanup, formatting, or renaming of fields in order to use the data in a Geographic Information System (GIS). This project employs the Environmental Systems Research Institute's (ESRI) ArcView as its GIS mapping tool and contains several data layers (or themes) that are used to create a geographic view of the margin off the U.S. Gulf of Mexico. These vector data form a basemap comprised of polygon and line themes that include a U.S. coastline (1:80,000), U.S. cities, and state boundaries.

Open-File Report↗
USGS1979

An experimental ground-magnetic and VLF-EM traverse over a buried paleochannel near Salisbury, Maryland

Since, 1963, the Maryland Geological Survey and the U.S. Geological Survey have been engaged in a study of the Pleistocene Series beneath a 230 square kilometer area around Salisbury, Maryland. (Hansen, 1966; Weigle, 1972; Zohdy and others, 1974, p.56) North of Salisbury a deep Pleistocene paleochannel was discovered; this channel was carved into an erosional plain at the top of the Miocene deposit, was filled and blanketed subsequently with deposits (mostly sand and gravel) of Pleistocene age. The channel is a prolific source of ground water, and has been outlined for a least 15 kilometers by means of power-augering and gamma-logging. A geophysical survey using ground magnetics and VLF-EM was made over the channel in an attempt to see if a more efficient method than augering could be developed to map the paleochannel at depth; the survey traverse was made over one of the better defined parts of the paleochannel (see figure 1.) where airborne magnetics and VLF studies could easily be done as a potential follow-up. We hoped to be able to map resistivity changes between aquifer and aquiclude facies with the VLF-EM, and perhaps identify other facies changes in black-sand concentrations with ground magnetics. The data is presented in Table 1 and plotted in figure 2. The traverse extended from north to south, with station spacing of 100 meters, for an over all length of 4.5 kilometers.

Maryland↗
USGS2022

Geologic maps of the Stephenson and Winchester quadrangles, Frederick and Clarke Counties, Virginia, and Inwood and White Hall quadrangles, Berkeley and Jefferson Counties, West Virginia

The study area consists of four contiguous 7.5-minute quadrangles and is located in Frederick and Clarke Counties, Virginia, and Berkeley and Jefferson Counties, West Virginia. The individual quadrangles are Stephenson, Winchester, Inwood, and White Hall. The study area lies within the Great Valley subprovince of the Valley and Ridge physiographic province where about 23,000 feet (ft) (7,000 meters [m]) of Middle Cambrian to Upper Devonian sedimentary rocks are exposed and are overlain by Holocene and older surficial deposits. The area of the four maps is divided into three geologic regions based on the following primary lithologies: (1) Cambrian and Ordovician carbonate rocks of the Great Valley southeast of the North Mountain fault zone and east and west of the core of the Massanutten synclinorium; (2) shale, graywacke, and calcareous shale of the Ordovician Martinsburg Formation of the Great Valley and Massanutten synclinorium; and (3) Ordovician through Devonian clastic rocks and minor limestone and dolostone northwest of and within the North Mountain fault zone. Rocks of all three regions were folded and faulted during the late Paleozoic Alleghanian orogeny (roughly 320 to 250 million years before present). The terrain of this portion of the Great Valley generally is gently to moderately rolling with low local relief with elevations in the study area ranging from about 425 ft (130 m) where Opequon Creek flows out of the eastern edge of the Inwood quadrangle to about 950 ft (290 m) adjacent to Round Hill in the western part of the Winchester quadrangle. Sinkholes and other karst features are common in the carbonate rocks of the Great Valley. The area west of the North Mountain fault zone is underlain by middle Paleozoic strata and consists of a series of ridges and valleys with higher local relief, with elevations ranging from about 785 ft (240 m) in the vicinity of Green Spring in the central part of the White Hall quadrangle to about 1,435 ft (437 m) at the summit of North Mountain in the northeastern part of the White Hall quadrangle.

Virginia, West Virginia↗
USGS2005

The National Assessment of Shoreline Change: A GIS compilation of vector shorelines and associated shoreline change data for the U.S. southeast Atlantic coast

The Coastal and Marine Geology Program of the U.S. Geological Survey has generated a comprehensive database of digital vector shorelines and shoreline change rates for the U.S. Southeast Atlantic Coast (Florida, Georgia, South Carolina, North Carolina). These data, which are presented herein, were compiled as part of the U.S. Geological Survey's National Assessment of Shoreline Change Project. Beach erosion is a chronic problem along most open-ocean shores of the United States. As coastal populations continue to grow and community infrastructures are threatened by erosion, there is increased demand for accurate information including rates and trends of shoreline migration. There is also a critical need for shoreline change data that is consistent from one coastal region to another. One purpose of this work is to develop standard repeatable methods for mapping and analyzing shoreline movement so that periodic updates of shorelines and shoreline change rates can be made nationally that are systematic and internally consistent. This data compilation for open-ocean, sandy shorelines of the U.S. Southeast Atlantic Coast is the second in a series that already includes the Gulf of Mexico, and will eventually include the Pacific Coast, and parts of Hawaii and Alaska. Short- and long-term shoreline change evaluations are based on merging three historical shorelines with a modern shoreline derived from lidar (light detection and ranging) topographic surveys. Historical shorelines generally represent the following time periods: 1800s, 1920s-1930s, and 1970s. The most recent shoreline is derived from data collected over the period of 1997-2002. Long-term rates of change are calculated by linear regression using all four shorelines. Short-term rates of change are simple end-point rate calculations using the two most recent shorelines. Please refer to our full report on shoreline change for the U.S. Southeast Atlantic Coast at http://pubs.usgs.gov/of/2005/1401/ to get additional information regarding methods and results.

southeast Atlantic coast↗
USGS2005

Geologic map of the Wenatchee 1:100,000 quadrangle, central Washington: A digital database

This digital map database has been prepared by R.W. Tabor from the published Geologic map of the Wenatchee 1:100,000 Quadrangle, Central Washington. Together with the accompanying text files as PDF, it provides information on the geologic structure and stratigraphy of the area covered. The database delineates map units that are identified by general age and lithology following the stratigraphic nomenclature of the U.S. Geological Survey. The authors mapped most of the bedrock geology at 1:100,000 scale, but compiled Quaternary units at 1:24,000 scale. The Quaternary contacts and structural data have been much simplified for the 1:100,000-scale map and database. The spatial resolution (scale) of the database is 1:100,000 or smaller. This database depicts the distribution of geologic materials and structures at a regional (1:100,000) scale. The report is intended to provide geologic information for the regional study of materials properties, earthquake shaking, landslide potential, mineral hazards, seismic velocity, and earthquake faults. In addition, the report contains information and interpretations about the regional geologic history and framework. However, the regional scale of this report does not provide sufficient detail for site development purposes.

Washington↗
USGS2012

Seafloor geology and benthic habitats, San Pedro Shelf, southern California

Seafloor samples, videography, still photography, and real-time descriptions of geologic and biologic constituents at or near the seafloor of the San Pedro Shelf, southern California, advance the study of natural and man-made processes on this coastal area off the metropolitan Los Angeles area. Multibeam echo-sounder data collected by the U.S. Geological Survey in 1998 and 1999 guided sampling and camera work in 2004 resulting in a new seafloor character map that shows possible benthic habitats in much higher resolution (4- and 16-m pixels) than previously available. The seafloor is characterized by primarily muddy sand and sand with outcrops of Miocene and Pliocene bedrock along the Palos Verdes Fault Zone. Observed benthic populations indicate low abiotic complexity, low biotic complexity, and low biotic coverage. The data are provided for use in geographic information systems (GIS).

California↗
USGS2012

Energy map of southwestern Wyoming, Part A - Coal and wind

To further advance the objectives of the Wyoming Landscape Conservation Initiative (WLCI) the U.S. Geological Survey (USGS) and the Wyoming State Geological Survey (WSGS) have compiled Part A of the Energy Map of Southwestern Wyoming. Focusing primarily on electrical power sources, Part A of the energy map is a compilation of both published and previously unpublished coal (including coalbed gas) and wind energy resources data, presented in a Geographic Information System (GIS) data package. Energy maps, data, documentation and spatial data processing capabilities are available in a geodatabase, published map file (pmf), ArcMap document (mxd), Adobe Acrobat PDF map (plate 1) and other digital formats that can be downloaded at the USGS website. Accompanying the map (plate 1) and the geospatial data are four additional plates that describe the geology, energy resources, and related infrastructure. These tabular plates include coal mine (plate 2), coal field (plate 3), coalbed gas assessment unit (plate 4), and wind farm (plate 5) information with hyperlinks to source publications and data on the internet. The plates can be printed and examined in hardcopy, or accessed digitally. The data represent decades of research by the USGS, WSGS, BLM and others, and can facilitate landscape-level science assessments, and resource management decisionmaking.

Wyoming↗