Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Frontiers in Environmental Science”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,607 records · Page 52Linked to original sources
USGS2024

Deep structure of Siletzia in the Puget Lowland: Imaging an obducted plateau and accretionary thrust belt with potential fields

Detailed understanding of crustal components and tectonic history of forearcs is important due to their geological complexity and high seismic hazard. The principal component of the Cascadia forearc is Siletzia, a composite basaltic terrane of oceanic origin. Much is known about the lithology and age of the province. However, glacial sediments blanketing the Puget Lowland obscure its lateral extent and internal structure, hindering our ability to fully understand its tectonic history and its influence on modern deformation. In this study, we apply map-view interpretation and two-dimensional modeling of aeromagnetic and gravity data to the magnetically stratified Siletzia terrane revealing its internal structure and characterizing its eastern boundary. These analyses suggest the contact between Siletzia (Crescent Formation) and the Eocene accretionary prism trends northward under Lake Washington. North of Seattle, this boundary dips east where it crosses the Kingston arch, whereas south of Seattle the contact dips west where it crosses the Seattle uplift (SU). This westward dip is opposite the dip of the Eocene subduction interface, implying obduction of Siletzia upper crust at this southern location. Elongate pairs of high and low magnetic anomalies over the SU suggest imbrication of steeply-dipping, deeply rooted slices of Crescent Formation within Siletzia. We hypothesize these features result from duplication of Crescent Formation in an accretionary fold-thrust belt during the Eocene. The active Seattle fault divides this Eocene fold-thrust belt into two zones with different structural trends and opposite frontal ramp dips, suggesting the Seattle fault may have originated as a tear fault during accretion.

Washington↗
USGS2024

Generalized potentiometric maps of the Fort Union, Hell Creek, and Fox Hills aquifers within the Standing Rock Reservation

Generalized potentiometric surfaces of the Fort Union, Hell Creek, and Fox Hills aquifers were constructed to assess the groundwater resources of the Standing Rock Reservation. Additionally, this information can provide water managers with tools and data to effectively manage water resources in the future. Previous studies that mapped the geology and hydrogeology of the area at differing scales were used to confirm in which aquifer the study wells were completed. Water-level data from wells are provided by the U.S. Geological Survey Groundwater System Inventory database, the South Dakota Department of Agriculture and Natural Resources, and the North Dakota Department of Water Resources. Hydrographs were constructed for five selected observation wells to evaluate historical water-level fluctuations and trends. Hydrographs for the Hell Creek aquifer showed a flat trend with a rise in 2020. Hydrographs for the deeper Fox Hills aquifer showed that water levels fluctuated in response to climatic conditions and demonstrated an increasing trend in water-level elevations starting in 2010. Hydrographs were not constructed for any wells completed in the Fort Union Formation because none of the wells had continuous long-term measurements. Generalized potentiometric surfaces, constructed from interpolating water-level elevations, gave insight into groundwater flow directions. Groundwater in the Fort Union aquifer likely flows radially outward from the northwest part of the study area to the northeast and south-southeast parts. Groundwater in the Hell Creek aquifer generally flows from higher elevations in the northwest towards lower areas, where surface-water tributaries have incised into the aquifer. Groundwater in the Fox Hills aquifer likely flows from higher elevations in the west, southwest, and central parts of the study area towards the valleys of the Grand River and Missouri River. Most wells used for constructing potentiometric maps had only one recorded water-level measurement from drillers at the time of well construction. These measurements are often subject to error because the well is still recovering and because of spatial limitations of data availability. Also, because single water-level measurements were recorded at different points in time, additional uncertainty is introduced by fluctuating climatic conditions effect on water levels. Potentiometric map interpretation limitations are a result of areas with sparse data. Limitations also arise from potentiometric surfaces generalizing a complex and dynamic hydrogeologic system; however, the generalized potentiometric surface maps can be used to assist water managers and can help prioritize locations for future monitoring in areas with high uncertainty from sparse existing data.

North Dakota, South Dakota↗
USGS2024

Post-glacial stratigraphy and late Holocene record of great Cascadia earthquakes in Ozette Lake, Washington, USA

Ozette Lake is an ~100-m-deep coastal lake located along the outer coast of the Olympic Peninsula (Washington, USA); it is situated above the locked portion of the northern Cascadia megathrust but also relatively isolated from active crustal faults and intraslab earthquakes. Here we present a suite of geophysical and geological evidence for earthquake-triggered mass transport deposits (MTDs) and related turbidite deposition in Ozette Lake since ca. 14 ka. Comprehensive high-resolution bathymetry data, seismic reflection profiles, and sediment cores are used to characterize the post-glacial stratigraphic framework and examine paleoseismic evidence in the lacustrine sediments. Stacked sequences of MTDs along the steep eastern flanks of the lake appear to grade basin-ward from thick, chaotic, blocky masses to thin, parallel-bedded turbidite beds. The discrete turbidite event layers are separated by fine-grained (silt and clay) lake sedimentation. The event layers are observed throughout the lake, but the physical characteristics of the deposits vary considerably depending on proximity to primary depocenters, steep slopes, and subaqueous deltas. A total of 30–34 event deposits are observed in the post-glacial record. Radiometric dating was used to reconstruct a detailed sedimentation history over the last ~5.5 k.y., develop an age model, and estimate the recurrence (365–405 yr) for the most recent 12 event layers. Based on sedimentological characteristics, temporal overlap with other regional paleoseismic chronologies, and recurrence estimates, at least 10 of the dated event layers appear to be sourced from slope failures triggered by intense shaking during megathrust ruptures; the recurrence interval for these 10 events is 440–560 yr. Thus, Ozette Lake contains one of the longest and most robust geological records of repeated shaking along the northern Cascadia subduction zone.

Washington↗
USGS2024

Time varying crustal anisotropy at Whakaari/White Island volcano

Whakaari/White Island has been the most active New Zealand volcano in the 21st century, producing small phreatic and phreatomagmatic eruptions, which are hard to predict. The most recent eruption occurred in 2019, tragically claiming the lives of 22 individuals and causing numerous injuries. We employed shear-wave splitting analyses to investigate variations in anisotropy during quiescence, unrest, and an eruption between 2018 and 2020. We examined spatial and temporal variations in 7972 shear-wave splitting measurements and derived 1402 V p /IV s ratio measurements. Comparing shear-wave splitting parameters from similar earthquake paths across different times indicates that the observed temporal changes are unlikely to result from variations in earthquake paths through media with spatial variability. Instead, these changes may stem from variations in anisotropy over time, likely caused by changes in crack alignment due to stress or varying fluid content.

Whakaari/White Island volcano↗
USGS2025

Identifying precursors and tracking pulses of magma ascent in multidisciplinary data during the 2018–2023 phreatomagmatic eruption at Semisopochnoi Island, Alaska

The 2018–2023 phreatomagmatic eruptions at Semisopochnoi Island, Alaska produced abundant long-period (LP) seismicity, harmonic and broadband tremor, and explosion signals over several well-monitored periods of eruption and quiescence. The corresponding dataset provides an excellent opportunity to investigate precursory and syn -eruptive geophysical signals of long-lived phreatomagmatic eruptions using multiparameter observations. We generated explosion and LP event catalogs through novel implementations of the REDPy ( Hotovec-Ellis, 2024 ) repeating event detector in mid-2021 following a network upgrade and the onset of a new phase of the eruption. The hundreds of detected explosions show a high degree of infrasound waveform similarity over more than a year, indicating a repeating source mechanism likely associated with explosive magma-water interaction. The seismic LP catalog shows that events began over a month prior to renewed explosive activity at the beginning of August 2021, and that lower frequency index (FI) LPs were generated in the week prior to the onset of explosions. We applied a recently developed machine learning tool (VOISS-Net, Tan et al., 2024 ) to catalog abundant broadband and harmonic seismic tremor recorded before and during the renewed explosive activity, along with LPs and explosions. The tremor catalogs complement the LP and explosion catalogs by filling out the seismic sequence with the dominant signal types. Together, these catalogs reveal a seismic sequence of renewed unrest that started with several weeks of LP events, followed by LPs with lower FI values and harmonic tremor in the days prior to explosive activity, and finally the onset of discrete explosions and broadband eruption tremor. We interpret this sequence as the ascent of a new pulse of magma that first interacted with the hydrothermal/groundwater system to produce LPs, followed by harmonic tremor, and that ultimately drove explosive magma-water interactions and periods of continuous ash emissions. The 2021 seismic sequence, in combination with long-term records of satellite SO 2 emissions, deformation from interferometric synthetic aperture radar (InSAR) analysis, ash sample analysis, infrasound, and volcano tectonic seismicity, allows us to interpret the entire 9-year period of unrest and eruption that began with an intrusion and earthquake swarm in 2014.

Alaska↗
USGS2025

Evolution of permeability and strength recovery of shear fracture under hydrothermal conditions

Geothermal energy is a clean and renewable resource that depends on the ability to move water through hot rock. In many locations, the ability to move water through rock requires the presence of extensive natural or human-made systems of fractures. However, these fracture systems are influenced by a variety of complex processes that occur at the temperature and pressure conditions found in geothermal reservoirs. To make geothermal systems more efficient, it is important to understand how these fractures evolve over time in response to these processes. This study explored how fractures in rock change under high-temperature and pressure conditions, like those found in geothermal reservoirs, through laboratory experiments and numerical simulations. In general fractures, tend to close due to pressure from the surrounding rock preventing the flow of water. One set of laboratory experiments revealed that fractures in granitic rock can weaken over time at elevated temperatures. These weak fractures can then slip slowly potentially keeping the fracture open for a longer period. This study also showed that at the highest temperature examined (250 °C) large differences between the chemical composition of the rock and the fluid moving through it could improve water flow temporarily likely due to the water dissolving parts of the rock. Flow rate predicted by models shows overall good agreement with the flow rate measured in our experiments but with some long time-scale variations that may be due to mechanical wear of the fracture surface. A second set of experiments found that, over the temperature range examined, the closure of fractures was caused by brittle failure driven by high stresses at points where fracture surfaces were in contact. This result suggests that fracture closure in geothermal reservoirs could be counteracted by maintaining high pore pressures. Additionally, we also tested a new method using electrical resistance to measure fracture closure in controlled systems with high precision.

Final Technical Report↗
USGS2025

Rapid emplacement of the Keaiwa Lava Flow of 1823 from the Great Crack in the Southwest Rift Zone of Kilauea volcano

The Keaīwa Lava Flow of 1823 in the Southwest Rift Zone of Kīlauea volcano is unusual for its expansive pāhoehoe sheet flow morphology and lack of constructive vent topography, despite having a similar tholeiitic basalt composition to other lavas erupted from Kīlauea. This lava flow issued from a ∼10-km-long continuous fissure now known as the Great Crack, and has an unusually thin sheet flow morphology with margin thicknesses of ∼15–110 cm (average of 42 cm). Based on field observations of the lava flow at its fissure vent (e.g., drain-back features), we propose that the Great Crack formed, or at least significantly widened, just prior to and syn-eruptively with this 1823 eruption. The absence of pyroclastic cones or spatter ramparts indicates that the eruption consisted of a rapid outpouring of relatively degassed lava as the fissure unzipped. The rapidly moving lava flow overtopped pre-existing tumuli and scoria cones (e.g., Lava Plastered Cones) up to ∼10 m tall. Glass and whole-rock chemistry yield homogeneous compositions for the lavas erupted from the Great Crack, with glass compositions of 6.40 ± 0.10 wt% MgO and whole-rock compositions of 7.39 ± 0.07 wt% MgO. Lava pads erupted from a short western fissure system are richer in mafic minerals (e.g., olivine and clinopyroxene), and show slightly more MgO-rich whole-rock compositions (7.79 ± 0.05 wt%). MgO-in-glass thermometry on juvenile spatter yield eruption temperatures of 1153 ± 13°C that are typical of Kīlauea lavas. Thus, the extensive sheet-like lava flow morphology is not a direct consequence of unusual magmatic or rheological conditions (i.e., low viscosity). Instead, the flow morphology is associated with high effusion rates caused by sudden drainage of uprift magma as it erupted from the Great Crack. Lava flow modeling on a 2-m-resolution digital elevation model indicates that a minimum bulk effusion rate of ∼5800 m 3 /s (∼3500 m 3 /s dense rock equivalent) and a minimum flow velocity of ∼11 m/s are required for the lava flow to overcome the topography of the Lava Plastered Cones. This effusion rate is among the highest inferred for eruptions in Hawaiʻi and around the world. This study highlights a less frequent eruption style at Hawaiian volcanoes characterized by a sudden outpouring of lava from an unusual fissure system. Local eyewitness accounts indicate that the 1823 eruption was preceded by seismicity. Given the complex magmatic-volcanic-tectonic relations across Kīlauea, we speculate that the south flank could have slipped over one or more events that ultimately triggered unzipping of the Great Crack and passive release of briefly stored uprift magma. An eruption similar to 1823 at Kīlauea or Mauna Loa, with an eruptive timeframe that could be as short as an hour, with high effusion rates and rapid flow front velocities, would not easily allow for a timely response.

Hawaii↗
USGS2024

Groundwater flow model for the Des Moines River alluvial aquifer near Des Moines, Iowa

Des Moines Water Works (DMWW) is a regional municipal water utility that provides residential and commercial water resources to about 600,000 customers in Des Moines, Iowa, and surrounding municipalities in central Iowa. DMWW has identified a need for increased water supply and is exploring the potential for expanding groundwater production capabilities in the Des Moines River alluvial aquifer, where it operates two radial collector wells (RCWs). The U.S. Geological Survey, in cooperation with DMWW, completed a study of the Des Moines River alluvial aquifer and interactions of the RCWs with the aquifer; no previously published model has included the existing well locations, which is the focus of this model. A conceptual and numerical groundwater flow model have been developed to characterize the Des Moines River alluvial aquifer under existing conditions, to simulate water levels observed in the RCWs, and to provide publicly accessible hydrologic data and research that advance understanding of the regional hydrologic system and can potentially be used in the future to evaluate groundwater production scenarios. Model performance was assessed by comparing observed and simulated groundwater levels that included water level elevations, water level changes, water level inequality observations, surface water streamflow, and change in surface water volume from upstream to downstream. Water table elevation in the aquifer layers is on average slightly overestimated with average absolute value error less than 1.5 meters at both RCWs and less than 2.5 meters for all observation wells in the alluvial aquifer layers. The model also accurately simulated water tables greater than the RCW design minimum (a water level threshold at which RCW pumping is reduced) in all timesteps for which water level observation data existed. Water table elevation error was higher in other model layers that were not the focus of the study, and the model did not accurately match streamflow targets.

Iowa↗
USGS2026

Storage timescales and the crystal growth history recorded in the layered reservoir of the Unit 3 Kulanaokuaiki Tephra Member of the Uēkahuna Ash from Kīlauea volcano

The Kulanaokuaiki Tephra Unit 3 (900 C.E.) was a subplinian basaltic scoria eruption, the largest known to have occurred at Kīlauea’s summit. The initiation mechanism and cause(s) of this highly hazardous eruption remain poorly understood, particularly as this style of activity has not been observed in the modern period. We use olivine diffusion timescales from Fe-Mg and lithium zoning to assess magma storage timescales and evaluate evidence for mixing prior to eruption. Of the 200 crystals assessed, 55% are normally zoned for forsterite and 45% are non-zoned. Zoned crystals (> 1 mm) ( n = 96) have average compositions of Fo 89 cores and Fo 81 rims, while small crystals 0.5–1 mm ( n = 14) have Fo 85 cores and Fo 82 rims. Modeled Fo diffusion timescales range from < 1 to 12.6 years (median of 3.0 years). Lithium maps in 32 of the forsterite-zoned crystals reveal a variety of lithium zoning types, most of which we attribute to crystal growth. Many lithium profiles are coupled to phosphorus within the outer ~ 100 μm of the crystal ( n = 17), reflecting growth processes and precluding their use for diffusion studies. Overall, our Unit 3 olivine dataset displays no evidence of magmatic priming shortly prior to eruption, unlike prior observations for the basaltic subplinian eruption of the Keanakāko‘i Tephra Unit E (1650 C.E.). Thus, explosive eruption magmas may be stored for considerably longer than previously thought, and magmatic priming is not a necessary precursor for Kīlauea’s explosive eruptions. We hypothesize that gas-driven filter pressing from crystallization of microlites and macrocrysts in the reservoir slurry contributed to the explosivity of the Unit 3 eruption.

Hawaii↗
USGS2026

Geochemical disequilibrium at the brittle-ductile transition

We investigate the microtextural, microchemical, and isotopic effects of late-stage ductile deformation in quartzite mylonites and kyanite–muscovite–quartz veins from the Raft River shear zone (Utah). Quartz microstructures record pervasive disequilibrium, expressed by unannealed features including undulatory extinction, deformation lamellae, and poorly defined fabrics, typical of waning deformation in shear zones. Microchemical disequilibrium is best preserved in kyanite quartzites, where CL-zoned kyanite records repeated fractures, overgrowth, and mineral precipitation, and in muscovite from muscovite-poor quartzite mylonites that shows minor-element zoning consistent with syn-deformational overgrowth on detrital cores. In contrast, muscovite from muscovite-rich kyanite quartzites exhibits minimal chemical zoning. These microchemical variations correlate with 40 Ar/ 39 Ar age systematics. Chemically zoned muscovite preserves variable single-step ages, including ∼150 Ma ages, reflecting retention of detrital cores. In contrast, syndeformational muscovite consistently yields Miocene ages, indicating recrystallization and new growth below argon closure temperatures that reset inherited isotopic signatures. Similar trends are observed in quartzite mylonites, where increasing quartz recrystallization and stronger crystallographic preferred orientations occur toward deeper structural levels. Together, these observations indicate increasing retrograde deformation and recrystallization with depth in the Raft River shear zone and demonstrate that strain-driven recrystallization exerts a first-order control on muscovite ages. We suggest that apparent thermochronologic gradients in retrograde shear zones may reflect recrystallization gradients rather than temperature gradients. Where cooling limits the thermal driving force for recrystallization, isotopic relics are preserved, and local deformation and fluid availability control re-equilibration. Consequently, isotopic disequilibrium—particularly in the 40 Ar/ 39 Ar system—may be the rule rather than the exception of retrograde tectonic environments.

Idaho, Utah↗
USGS2026

Potential impacts of groundwater pumping on stream temperature are greatest in streams with substantial cold groundwater inflows

Groundwater pumping-induced reductions in streamflow (known as ‘streamflow depletion’) have been documented worldwide, but potential impacts of streamflow depletion on stream temperature are not well understood. Here, we use two types of models to identify potential impacts of pumping on stream temperature across the conterminous United States (CONUS) to determine which aspects of a stream's annual thermograph (thermal signatures) can be used to monitor and manage streamflow depletion impacts on stream temperature. We used long-term streamflow and stream temperature data from 30 streamgages across CONUS and surrogate models of streamflow depletion to analyse potential stream temperature impacts at each site. We compared two different stream temperature modelling approaches: (i) a process-based energy balance model and (ii) statistical regression models based on air temperature and stream discharge. We calculated a suite of thermal signatures under depleted and non-depleted conditions for each stream and found that maximum annual 7-day temperature and annual temperature range are potentially the most sensitive to streamflow depletion, with potential changes of at least 2°C at > 70% of the sites when using the process-based model. We also found that the regression-based models predicted much less sensitivity of stream temperature to streamflow depletion than the process-based model. This work provides an initial evaluation and sensitivity analysis of the potential impacts of streamflow depletion on stream temperature. We demonstrate that stream temperature may be most sensitive to pumping in streams with a high proportion of flow sourced from relatively cold groundwater inputs, and that regression-based stream temperature models may underpredict stream temperature changes caused by streamflow depletion.

conterminous United States↗
USGS2025

Geologic models underpinning the 2024 U.S. Geological Survey assessment of undiscovered oil and gas resources in the Hosston and Travis Peak Formations of the onshore Gulf Coast region, U.S.A.

The Early Cretaceous (Berriasian–Hauterivian) Hosston Formation in Louisiana and eastward is time correlative to the Travis Peak Formation of Texas and southern Arkansas. The formation is a first-order clastic sequence with a regional carbonate transgressive surface as an upper contact. The Hosston and Travis Peak formations contain conventional natural gas and oil accumulations that have been produced for nearly a century. These mature reservoirs contain terrigenous fluvial-deltaic, shore-zone, and paralic deposits across the productive trend; organic-lean mudstone and siltstone lithologies are found outboard of the Lower Cretaceous shelf margin. Producing reservoirs exhibit normal pressure gradients from 0.43 to 0.55 psi/ft (9.7 to 12.4 kpa/m), depths from 4000 to over 20,000 ft (1220 to 6100 m), and temperatures from 150 to 385°F (65 to 196°C). Wells are primarily vertical completions. The number of new field wildcats has been declining since the late 1990s. This paper presents comprehensive geologic models, which include lithofacies maps, structure and isopach maps, burial history models, regional seismic interpretations, and events charts that underpin the recently completed U.S. Geological Survey assessment of undiscovered, technically recoverable hydrocarbons within the Hosston and Travis Peak formations. This study also provides geographic and stratigraphic distributions of Hosston–Travis Peak reservoir properties, including geopressure, reservoir temperature, porosity, permeability, API gravity, and gas-oil ratios. Results indicate estimated undiscovered, technically recoverable mean resources of 28 million barrels of oil and 35.8 trillion cubic ft of gas in conventional and continuous accumulations within the Lower Cretaceous Hosston and Travis Peak formations of the onshore U.S. Gulf Coast region. Quantitative assessment results are detailed in U.S. Geological Survey Fact Sheet 2025–3021 and associated Data Release.

GCAGS Journal↗
USGS1997

Integrity of production wells and confining unit at the Naval Weapons Industrial Reserve Plant, Dallas, Texas, 1995

Ground water in the shallow alluvial aquifer is contaminated at the Naval Weapons Industrial Reserve Plant, Dallas, Texas. Five production wells at the site are cased through the alluvial aquifer and underlying units and are screened in either the Paluxy or Twin Mountains aquifers. Three abandoned wells, originally completed in the Twin Mountains aquifer but filled with drilling mud in 1958, also penetrate the alluvial aquifer. The Paluxy and Twin Mountains aquifers are used for drinking-water supplies in and around the Dallas-Fort Worth metroplex. Trichloroethylene and its degradation products, dichloroethylene and vinyl chloride, and the metal chromium previously have been detected in the shallow alluvial aquifer. Current (1995) analyses of water-quality samples taken from the static water column of the five production wells and one of the abandoned wells indicate no trichloroethylene, dichloroethylene, or vinyl chloride in the water column of these wells. Chromium was detected in all samples, but concentrations were less than the practical quantitation limit, which is the regulatory action level for this site. The results of borehole geophysical log analysis indicate that two of the production wells could have vertically connected intervals where cement bonding in the well annulus is poor. The other production wells have overall good bonding. Temperature logs do not indicate flow behind casing except in the screened interval of one well. Geophysical logs show the Eagle Ford Shale ranges from 147 to 185 feet thick at the site. The Eagle Ford Shale has low permeability and a high plasticity index. These physical characteristics make the Eagle Ford Shale an excellent confining unit.

Texas↗
USGS2025

Accurate simulation of flow through dipping aquifers with MODFLOW 6 using enhanced cell connectivity

In simulations of groundwater flow through dipping aquifers, layers of model cells are often “deformed” to follow the top and bottom elevations of the aquifers. When this approach is used in MODFLOW, adjacent cells within the same model layer are vertically offset from one another, and the standard conductance-based (two-point) formulation for flow between cells does not rigorously account for these offsets. The XT3D multi-point flow formulation in MODFLOW 6 is designed to account for geometric irregularities in the grid, including vertical offsets, and to provide accurate results for both isotropic and anisotropic groundwater flow. A recent study evaluated the performance of the standard formulation and XT3D using a simple, synthetic benchmark model of a steeply dipping aquifer. Although XT3D generally improved the accuracy of flow simulations relative to the standard formulation as expected, neither formulation produced accurate flows in cases that involved large vertical offsets. In this paper, we explain that the inability of XT3D to produce accurate flows in the steeply dipping aquifer benchmark was not due to an inherent limitation of the flow formulation, but rather to the limited cell connectivity inherent in the most commonly used discretization packages in MODFLOW 6. Furthermore, we demonstrate that XT3D is able to produce the expected accuracy when adequate cell connectivity is introduced using MODFLOW's unstructured grid type and the aquifer is discretized vertically using at least two model layers.

Groundwater↗
USGS2026

From model to action: Identifying the gaps in coastal marsh models for decision making

Coastal salt marsh modeling projects are designed to answer questions about where salt marshes may migrate, how they can migrate, and how they will be impacted by changing water levels. While this information is vital for climate-resilient marsh conservation, translating these findings into actionable results remains a challenge. The authors examined the actionability of marsh modeling efforts in the United States by analyzing data collected from semi-structured interviews of marsh model users ( n = 24) across two ongoing projects along the U.S. East Coast and the Gulf of America (Gulf of Mexico). By qualitatively analyzing the interview data, the authors found that the tasks of practitioners who use coastal marsh model outputs fall into three major themes: (1) marsh restoration, (2) planning with uncertainty, and (3) conserving habitat for marsh-reliant species. For each of these themes, the authors identify unmet needs, including high spatial resolution information for local planning, accessible descriptions of uncertainty to increase user confidence, and the incorporation of human dimensions data (e.g., human alterations to the landscape such as impoundments and culverts) for a comprehensive understanding of the coastal salt marsh. Marsh modeling projects should strategize how to fulfil these unmet user needs so that marsh modeling outputs can better support decisions related to marsh conservation and restoration.

Gulf of America, United States East Coast↗
USGS2026

Asynchronous landslide seasonality across the United States

Mid-range landslide outlooks can facilitate weather-related landslide preparedness and disaster response planning, but seasonal landslide activity remains poorly quantified at continental scales. Leveraging >55,000 reported landslides from across the United States (U.S.), we used circular statistics to quantify landslide seasonality in 67 National Weather Service County Warning Areas (CWAs). We found regional differences in landslide season timing and duration, with transitions between domains variably corresponding to climate class or river basin. We assessed differences in seasonality by movement type for slides, flows, and falls, detecting apparent, but uncertain, differences between slide and fall seasonalities in 27 of 35 (77%) of CWAs with both types reported. In the Pacific Northwest, where long records exist, we found a credible shift toward a later mean landslide season in western Washington from 1990 to 2020, but no trend in western Oregon. Our results can provide emergency planners a resource to assess seasonal landslide probability nationwide.

Geophysical Research Letters↗
USGS2026

Computation of regional groundwater budgets for the Virginia Coastal Plain aquifer system

Computation of detailed groundwater flow budgets for subdivisions of Virginia’s Coastal Plain aquifer system has enabled quantification and more thorough understanding of groundwater flow within this important water resource. A zone budget analysis conducted on previously published groundwater models of the Virginia Coastal Plain and Virginia Eastern Shore shows that groundwater conditions vary substantially throughout the Coastal Plain aquifer system due to local variations in hydrogeology and historical and ongoing variations in groundwater use and management. Decades of substantial groundwater withdrawal from the Coastal Plain aquifer system have fundamentally altered groundwater flow from pre-development conditions. Rates of sustainable withdrawal are limited because the downward groundwater flow rate into confined aquifers supplying groundwater is a relatively small portion of the total groundwater water budget for the aquifer system. Analyses of groundwater budgets from the Virginia Coastal Plain model show that groundwater flow is generally outward from the surficial aquifer to rivers and coastal water bodies and downward through a series of underlying aquifers and confining units to the Potomac aquifer, which is the deepest aquifer and the source of most groundwater withdrawals. Downward flow into the Potomac aquifer currently is estimated to be only 7 percent of total net precipitation-derived net recharge at the land surface but makes up about 66 percent of inflow to the aquifer in Virginia, with much of the remaining inflow occurring laterally from areas outside of defined groundwater budget regions in Virginia. For several decades prior to 2010, high rates of withdrawal from the Potomac aquifer resulted in substantial decline in groundwater storage in the aquifer and in most overlying aquifers and confining units. From 2010 to 2025, rates of withdrawal substantially lower than the historical maximum have resulted in small net increases in groundwater storage in the confined aquifer system for most regions of the Virginia Coastal Plain. Nevertheless, for the same period, groundwater storage for the entire model domain continues to incrementally decline, indicating that storage recovery in Virginia is offset by a continued decrease in storage in areas beneath the Chesapeake Bay or in adjacent areas of Maryland and North Carolina. Withdrawals from the Potomac aquifer have induced substantial downward flow which is a large part of groundwater budgets for confined aquifers such as the Potomac. Downward groundwater flow continues under current conditions, but because vertical flow rates are a function of the difference between water pressure in the upper surficial systems and lower confined units, those rates are lower than those in earlier decades as the confined water levels partially recover from larger groundwater withdrawals in the past. Geographically, groundwater flow is generally inward from perimeter regions of the Virginia Coastal Plain toward central regions with the largest withdrawal rates. Estimated groundwater inflow from coastal regions could be contributing to saltwater intrusion, though that was not measured directly in this study. Analyses of groundwater budgets from the Virginia Eastern Shore peninsula, a geographic region of the Virginia Coastal Plain, show that groundwater flow for that isolated aquifer system is generally outward from the surficial aquifer to coastal water bodies and downward into the confined Yorktown-Eastover aquifer system, which is the source of most withdrawals. Downward groundwater flow into the confined Yorktown-Eastover aquifer system is estimated to be less than 2 percent of total recharge and less than 9 percent of net recharge at the water table but makes up over 93 percent of all inflow to the confined aquifer system. Decades of substantial but relatively consistent groundwater withdrawals have induced greater downward flow rates into the confined aquifer system but also have resulted in loss of groundwater from storage. Currently, estimated storage loss accounts for slightly under 7 percent of withdrawals from the confined aquifer system. The current withdrawal rate from the confined Yorktown-Eastover system is near the highest reported rate for the Eastern Shore, which means that the storage depletion is expected to continue, even though groundwater levels appear to be relatively stable. Estimated groundwater flow rates upward from the confining unit underlying the Yorktown-Eastover system and small rates of inflow from coastal water bodies underscore ongoing concerns about up-coning and lateral intrusion of salty groundwater.

EarthArXiv↗
USGS2025

Geology and geochemistry of Ni-Co laterite occurrences of northern California and southern Oregon

Ni-Co laterite occurrences in the Klamath Mountains of southern Oregon and northern California contain Ni, Co, and Sc values comparable to global deposits. However, they are thin and limited in extent, often occurring as landslides and slumps. Olivine in the parent material contains Ni and Co and enstatite contains Sc. Through pervasive weathering, these elements where concentrated in Fe- and Mn-oxides. Unlike the mined Nickel Mountian deposit near Riddle, Oregon, these occurrences have no hydrous-Mg silicate minerals. Although the region experienced pervasive weathering in the Eocene, preservation of the laterite profiles was limited in the Klamath Mountains due to accelerated uplift and erosion compared to the Coast Range Provence.

Conference Paper↗