Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Rock Products”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51Linked to original sources

South Sumatra Basin Province, Indonesia; the Lahat/Talang Akar-Cenozoic total petroleum system

Oil and gas are produced from the onshore South Sumatra Basin Province. The province consists of Tertiary half-graben basins infilled with carbonate and clastic sedimentary rocks unconformably overlying pre-Tertiary metamorphic and igneous rocks. Eocene through lower Oligocene lacustrine shales and Oligocene through lower Miocene lacustrine and deltaic coaly shales are the mature source rocks. Reserves of 4.3 billion barrels of oil equivalent have been discovered in reservoirs that range from pre-Tertiary basement through upper Miocene sandstones and carbonates deposited as synrift strata and as marine shoreline, deltaic-fluvial, and deep-water strata. Carbonate and sandstone reservoirs produce oil and gas primarily from anticlinal traps of Plio-Pleistocene age. Stratigraphic trapping and faulting are important locally. Production is compartmentalized due to numerous intraformational seals. The regional marine shale seal, deposited by a maximum sea level highstand in early middle Miocene time, was faulted during post-depositional folding allowing migration of hydrocarbons to reservoirs above the seal. The province contains the Lahat/Talang Akar-Cenozoic total petroleum system with one assessment unit, South Sumatra.

Open-File Report↗

Trace element and Nd, Sr, Pb isotope geochemistry of Kilauea Volcano, Hawai'i, near-vent eruptive products: 1983-2001

This open-file report serves as a repository for geochemical data referred to in U.S. Geological Survey Professional Paper 1676 (Heliker, Swanson, and Takahashi, eds., 2003), which includes multidisciplinary research papers pertaining to the first twenty years of Puu Oo Kupaianaha eruption activity. Details of eruption characteristics and nomenclature are provided in the introductory chapter of that volume (Heliker and Mattox, 2003). Geochemical relations of this data are depicted and interpreted by Thornber (2003), Thornber and others (2003a) and Thornber (2001). This report supplements Thornber and others (2003b) in which whole-rock and glass major-element data on ~1000 near-vent lava samples collected during the 1983 to 2001 eruptive interval of Kilauea Volcano, Hawai'i, are presented. Herein, we present whole-rock trace element compositions of 85 representative samples collected from January 1983 to May 2001; glass trace-element compositions of 39 Pele’s Tear (tephra) samples collected from September 1995 to September 1996, and whole-rock Nd, Sr and Pb isotopic analyses of 10 representative samples collected from September 1983 to September 1993. Thornber and others (2003b) provide a specific record of sample characteristics, location, etc., for each of the samples reported here. Spreadsheets of both reports may be integrated and sorted based upon time of formation or sample numbers. General information pertaining to the selectivity and petrologic significance of this sample suite is presented by Thornber and others (2003b). As justified in that report, this select suite of time-constrained geochemical data is suitable for constructing petrologic models of pre-eruptive magmatic processes associated with prolonged rift zone eruption of Hawaiian shield volcanoes.

Hawai'i↗

Mountains and plains Denver's geologic setting

A slice of geologic history is exposed to view in the Denver, Colorado area. Denver is situated on the High Plains near the east front of the Rocky Mountains. As one travels westward from Denver toward the mountains, successively older rocks are crossed from the geologically young rocks of the High Plains and the South Platte River valley to the older rocks of the foothills and the ancient rocks of the mountains. Thus, within a few miles,the journey turns back the pages of time in a lifesized textbook that vividly illustrates the geologic events that shaped the landscape.

Colorado↗

Helvite, a product of magmatic emanations at Iron Mountain, Sierra Socorro Counties, New Mexico

The recent discovery of the widespread occurrence of helvite, a beryllium‐bearing mineral, at Iron Mountain, New Mexico, has aroused interest in the commercial possibilities of a mineral which heretofore has been considered to have only scientific significance. Helvite contains about 13 per cent beryllium oxide as compared with five to ten per cent beryllium oxide in the mineral, beryl, which at present is the principal source of commercial beryllium. Helvite is consistently distributed, though sparingly in some places, through great masses of contact‐metamorphic rock at Iron Mountain and, therefore, provides great hope for the future when the metallurgical problems have been solved and large‐tonnage, low‐grade ore can be utilized.

New Mexico↗

Biochemical indicators for the bioavailability of organic carbon in ground water

The bioavailability of total organic carbon (TOC) was examined in ground water from two hydrologically distinct aquifers using biochemical indicators widely employed in chemical oceanography. Concentrations of total hydrolyzable neutral sugars (THNS), total hydrolyzable amino acids (THAA), and carbon‐normalized percentages of TOC present as THNS and THAA (referred to as “yields”) were assessed as indicators of bioavailability. A shallow coastal plain aquifer in Kings Bay, Georgia, was characterized by relatively high concentrations (425 to 1492 μM; 5.1 to 17.9 mg/L) of TOC but relatively low THNS and THAA yields (∼0.2%–1.0%). These low yields are consistent with the highly biodegraded nature of TOC mobilized from relatively ancient (Pleistocene) sediments overlying the aquifer. In contrast, a shallow fractured rock aquifer in West Trenton, New Jersey, exhibited lower TOC concentrations (47 to 325 μM; 0.6 to 3.9 mg/L) but higher THNS and THAA yields (∼1% to 4%). These higher yields were consistent with the younger, and thus more bioavailable, TOC being mobilized from modern soils overlying the aquifer. Consistent with these apparent differences in TOC bioavailability, no significant correlation between TOC and dissolved inorganic carbon (DIC), a product of organic carbon mineralization, was observed at Kings Bay, whereas a strong correlation was observed at West Trenton. In contrast to TOC, THNS and THAA concentrations were observed to correlate with DIC at the Kings Bay site. These observations suggest that biochemical indicators such as THNS and THAA may provide information concerning the bioavailability of organic carbon present in ground water that is not available from TOC measurements alone.

Ground Water↗

Geology and Mineral Resources of the East Mojave National Scenic Area, San Bernardino County, California

From our evaluations that largely used model-based criteria, we conclude that much of the East Mojave National Scenic Area (EMNSA) contains significant indications of epigenetic mineralization of various types. Economically significant concentrations of many metals may possibly remain to be discovered in many parts of the EMNSA (see also Wetzel and others, 1992). We have discussed specific types of metallic deposits that are known to be present in the EMNSA. Some mountain ranges that have widespread occurrences are the Providence Mountains, Clark Mountain Range, Ivanpah Mountains, and New York Mountains; the area of Hackberry Mountain is included in a tract that is judged to be favorable for the discovery of epithermal, volcanic-hosted gold deposits (pl. 2). These ranges make up a broad, roughly north-south-trending region in the central part of the EMNSA. Much less endowed with known occurrences of all of the various types of deposits considered above are the Granite Mountains, the central parts of the Piute Range, the Fenner Valley area, the general area of Cima Dome, the Cima volcanic field, and areas west to Soda Lake. We have attempted to make some judgments concerning the gravel-covered areas in the EMNSA (pl. 3), including the areal extent of bedrock apparently covered only by thin veneers of gravel. But few data are available to us for the overwhelming bulk of the covered areas. The presence of any mineralization, the type of mineralization, and the extent and intensity of mineralization in the covered areas is essentially unknown. The likelihood is high, however, that those areas in the EMNSA covered only by a thin cap of gravels could host mineralization similar to that known in the adjoining mountain ranges. Most buried epigenetic-mineral deposits do not respond to standard geophysical methods, particularly at the coarse spacing of the data-collection points available for our evaluation. Restricting judgments concerning the presence of undiscovered metal resources in the EMNSA only to currently known types of deposits and to regionally representative tonnages for such deposits would undoubtedly yield small estimates for volumes of many metals that might be exploited. Metals from most newly discovered, base- and ferrous-metal deposits of the types presently known in the EMNSA probably would be insignificant from the standpoint of national needs. For example, copper from a newly discovered skarn deposit in the EMNSA would have roughly a 25 percent chance of being in excess of approximately 10,000 tonnes contained Cu, if the grade-and-tonnage distribution curves of Jones and Menzie (1986b) for copper skarns are applicable to copper skarn in the EMNSA. Most copper in the United States is produced in the Southwest from much larger open-pit operations than those associated with the typical copper skarn; the former operations exploit large-tonnage porphyry-type systems. Historically, the EMNSA has been the site of minor production of many metals from a large number of sites. Since 1985, however, a small number of sites in the EMNSA whose gold production and reserves are much greater than that of the preceding discoveries have been developed (see U.S. Bureau of Mines, 1990a). Nonetheless, widespread distribution of numerous types of deposits (including copper skarn, lead-zinc skarn, tin-tungsten skarn, polymetallic vein, gold-silver quartz-pyrite vein, low-fluorine porphyry molybdenum, gold breccia pipe, and volcanic-hosted gold) that are petrogenetically associated with igneous rock in many parts of the EMNSA is indicative of a metallogenic environment that may be the site of future discoveries of mineral-deposit types that are not now recognized by the exploration community. The science, art, and, yes, even luck of exploration procedures continually evolve, and this evolution is one of the most important aspects of currently employed methods of exploration (Bailly, 1981; Hutchinson and Grauch, 1991).

Miscellaneous Field Studies Map↗

Total Petroleum Systems of the Northwest Shelf, Australia: The Dingo-Mungaroo/Barrow and the Locker-Mungaroo/Barrow

The Northwest Shelf Province (U.S.G.S. #3948) of Australia contains two important hydrocarbon source-rock intervals and numerous high quality reservoir intervals. These are grouped into two petroleum systems, Dingo-Mungaroo/Barrow and Locker-Mungaroo/Barrow, where the Triassic Mungaroo Formation and the Early Cretaceous Barrow Group serve as the major reservoir rocks for the Jurassic Dingo Claystone and Triassic Locker Shale source rocks. The primary source rock, Dingo Claystone, was deposited in restricted marine conditions during the Jurassic subsidence of a regional sub-basin trend. The secondary source rock, Locker Shale, was deposited in terrestrially-influenced, continental seaway conditions during the Early Triassic at the beginning of the breakup of Pangea. These systems share potential reservoir rocks of deep-water, proximal and distal deltaic, marginal marine, and alluvial origins, ranging in age from Late Triassic through Cretaceous. Interformational seals and the regional seal, Muderong Shale, along with structural and stratigraphic traps account for the many types of hydrocarbon accumulations in this province. In 1995, the Northwest Shelf produced 42% of the hydrocarbon liquids in Australia, and in 1996 surpassed the Australian Bass Straits production, with 275,000 barrels per day (bpd) average. This region is the major producing province of Australia. Known reserves as of 1995 are estimated at 11.6 billion of barrels of oil equivalent (BBOE)(Klett and others, 1997) . Although exploration has been conducted since 1955, many types of prospects have not been targeted and major reserves continue to be discovered.

Open-File Report↗

Appendix A: Description of the Northeast Asia Project and Associated Products

The major purposes of this chapter are to provide (1) an overview of the regional geology, tectonics, and metallogenesis of Northeast Asia for readers who are unfamiliar with the region, (2) a general scientific introduction to the succeeding chapters of this volume, and (3) an overview of the methodology of metallogenic and tectonic analysis used in this study. We also describe how a high-quality metallogenic and tectonic analysis, including construction of an associated metallogenic-tectonic model will greatly benefit other mineral resource studies, including synthesis of mineral-deposit models; improve prediction of undiscovered mineral deposit as part of a quantitative mineral-resource-assessment studies; assist land-use and mineral-exploration planning; improve interpretations of the origins of host rocks, mineral deposits, and metallogenic belts, and suggest new research. Research on the metallogenesis and tectonics of such major regions as Northeast Asia (eastern Russia, Mongolia, northern China, South Korea, and Japan) and the Circum-North Pacific (the Russian Far East, Alaska, and the Canadian Cordillera) requires a complex methodology including (1) definitions of key terms, (2) compilation of a regional geologic base map that can be interpreted according to modern tectonic concepts and definitions, (3) compilation of a mineral-deposit database that enables a determination of mineral-deposit models and clarification of the relations of deposits to host rocks and tectonic origins, (4) synthesis of a series of mineral-deposit models that characterize the known mineral deposits and inferred undiscovered deposits in the region, (5) compilation of a series of metallogenic-belt belts constructed on the regional geologic base map, and (6) construction of a unified metallogenic and tectonic model. The summary of regional geology and metallogenesis presented here is based on publications of the major international collaborative studies of the metallogenesis and tectonics of Northeast Asia that have been led by the U.S. Geological Survey (USGS). These studies have produced two broad types of publications (1) a series of regional geologic, mineral-deposit, and metallogenic-belt maps, with companion descriptions of the region, and (2) a suite of metallogenic and tectonic analyses of the same region. The study area consists of eastern Russia (most of eastern Siberia and the Russian Far East), Mongolia, northern China, South Korea, Japan, and adjacent offshore areas. The major cooperative agencies are the Russian Academy of Sciences; the Academy of Sciences of the Sakha Republic (Yakutia); VNIIOkeangeologia and Ministry of Natural Resources of the Russian Federation; the Mongolian Academy of Sciences; the Mongolian University of Science and Technology; the Mongolian National University; Jilin University, Changchun, People?s Republic of China, the China Geological Survey; the Korea Institute of Geosciences and Mineral Resources; the Geological Survey of Japan/AIST; the University of Texas, Arlington, and the U.S. Geological Survey (USGS). This study builds on and extends the data and interpretations from a previous project on the Major Mineral Deposits, Metallogenesis, and Tectonics of the Russian Far East, Alaska, and the Canadian Cordillera conducted by the USGS, the Russian Academy of Sciences, the Alaska Division of Geological and Geophysical Surveys, and the Geological Survey of Canada. The major products of this project were summarized by Naumova and others (2006) and are described in appendix A.

Professional Paper↗

40Ar∗ loss in experimentally deformed muscovite and biotite with implications for 40Ar/39Ar geochronology of naturally deformed rocks

The effects of deformation on radiogenic argon ( 40 Ar ∗ ) retentivity in mica are described from high pressure experiments performed on rock samples of peraluminous granite containing euhedral muscovite and biotite. Cylindrical cores, ∼15 mm in length and 6.25 mm in diameter, were drilled from granite collected from the South Armorican Massif in northwestern France, loaded into gold capsules, and weld-sealed in the presence of excess water. The samples were deformed at a pressure of 10 kb and a temperature of 600 °C over a period 29 of hours within a solid medium assembly in a Griggs-type triaxial hydraulic deformation apparatus. Overall shortening in the experiments was approximately 10%. Transmitted light and secondary and backscattered electron imaging of the deformed granite samples reveals evidence of induced defects and for significant physical grain size reduction by kinking, cracking, and grain segmentation of the micas. Infrared (IR) laser (CO 2 ) heating of individual 1.5–2.5 mm diameter grains of muscovite and biotite separated from the undeformed granite yield well-defined 40 Ar/ 39 Ar plateau ages of 311 ± 2 Ma (2σ). Identical experiments on single grains separated from the experimentally deformed granite yield results indicating 40 Ar ∗ loss of 0–35% in muscovite and 2–3% 40 Ar ∗ loss in biotite. Intragrain in situ ultraviolet (UV) laser ablation 40 Ar/ 39 Ar ages (±4–10%, 1σ) of deformed muscovites range from 309 ± 13 to 264 ± 7 Ma, consistent with 0–16% 40 Ar ∗ loss relative to the undeformed muscovite. The in situ UV laser ablation 40 Ar/ 39 Ar ages of deformed biotite vary from 301 to 217 Ma, consistent with up to 32% 40 Ar ∗ loss. No spatial correlation is observed between in situ 40 Ar/ 39 Ar age and position within individual grains. Using available argon diffusion data for muscovite the observed 40 Ar ∗ loss in the experimentally treated muscovite can be utilized to predict average 40 Ar ∗ diffusion dimensions. Maximum 40 Ar/ 39 Ar ages obtained by UV laser ablation overlap those of the undeformed muscovite, indicating argon loss of <1% and an average effective grain radius for 40 Ar ∗ diffusion ⩾700 μm. The UV laser ablation and IR laser incremental 40 Ar/ 39 Ar ages indicating 40 Ar ∗ loss of 16% and 35%, respectively, are consistent with an average diffusion radius ≪100 μm. These results support a hypothesis of grain-scale 40 Ar ∗ diffusion distances in undeformed mica and a heterogeneous mechanical reduction in the intragrain effective diffusion length scale for 40 Ar ∗ in deformed mica. Reduction in the effective diffusion length scale in naturally deformed samples occurs most probably through production of mesoscopic and submicroscopic defects such as, e.g., stacking faults. A network of interconnected defects, continuously forming and annealing during dynamic deformation likely plays an important role in controlling both 40 Ar ∗ retention and intragrain distribution in deformed mica. Intragrain 40 Ar/ 39 Ar ages, when combined with estimates of diffusion kinetics and distances, may provide a means of establishing thermochronological histories from individual micas.

Brittany↗

California State Waters Map Series — Offshore of Fort Ross, California

Introduction In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP), designed to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats, and geology within the 3-nautical-mile limit of California&rsquo;s State Waters. The CSMP approach is to create highly detailed seafloor maps through collection, integration, interpretation, and visualization of swath sonar data, acoustic backscatter, seafloor video, seafloor photography, high-resolution seismic-reflection profiles, and bottom-sediment sampling data. The map products display seafloor morphology and character, identify potential marine benthic habitats, and illustrate both the surficial seafloor geology and shallow subsurface geology. The Offshore of Fort Ross map area is located in northern California, on the Pacific coast of Sonoma County, about 90 km north of San Francisco and 60 km south of Point Arena. The onshore part of the map area is largely undeveloped, used primarily for grazing and recreation; the small town of Jenner (population, 136), located at the mouth of the Russian River, is the largest cultural center. The coast and shoreline are rugged and scenic, characterized by rocky promontories, kelp-rich coves, and nearshore rocks and sea stacks. U.S. Highway 1 extends along the coast through the map area, crossing the Russian River and passing through Sonoma Coast State Park and Fort Ross State Historic Park. The Offshore of Fort Ross map area is cut by the northwest-striking San Andreas Fault, the right-lateral transform boundary between the North American and Pacific plates. The fault intersects the shoreline a few kilometers south of Fort Ross at Timber Gulch, and it juxtaposes Jurassic, Cretaceous, Paleocene, and Eocene rocks of the Franciscan Complex to the northeast and Tertiary sedimentary rocks to the southwest. In this area, the San Andreas Fault has an estimated slip rate of 17 to 24 mm/yr. The devastating great 1906 California earthquake (M7.8) is thought to have nucleated on the San Andreas Fault offshore of San Francisco, about 90 km to the south, with the rupture extending northward through the Offshore of Fort Ross map area to the south flank of Cape Mendocino. Approximately 3.6 m of lateral offset occurred at Timber Gulch during this event. The San Andreas Fault has an important influence on coastal geomorphology. The coastline in the northern part of the map area, southwest of the onshore San Andreas Fault, is characterized by steep shoreline bluffs and as many as four uplifted, relatively flat marine terraces that range in elevation from about 15 to 100 m. Northeast of the San Andreas Fault, about 12 km of coastline is marked by steep, landslide-prone cliffs that commonly are 200 to 300 m high. The mouth of the Russian River and its estuary cut through the steep coastal topography in the southern part of the Offshore of Fort Ross map area. The Russian River drains a large watershed (3,470 km 2 ), and it has an annual discharge of about 2 km 3 (1,600,000 acre-feet) and an annual sediment load of about 900,000 metric tons. The map area is part of the Russian River littoral cell, in which the predominant longshore drift is to the south. Small pocket beaches are most common along the shoreline, but longer linear beaches are present near the mouth of the Russian River. The seafloor in the north half of the map area is characterized by rocky outcrops of Tertiary sedimentary rocks. The rugged nearshore zone and the inner shelf area (to water depths of about 50 m) typically slopes gently seaward, whereas the smooth midshelf area within California&rsquo;s State Waters (about 50 to 85 m deep) is relatively flat. In contrast, the nearshore to midshelf area in the south half of the map area, which lies directly offshore of the mouth of the Russian River, has a more uniform, relatively flat slope. Shallow-marine and shelf sediments were deposited in the last about 21,000 years during the sea-level rise that followed the Last Glacial Maximum (LGM). Sea level was about 125 m lower than present during the LGM, at which time the entire Offshore of Fort Ross map area was emergent and the shoreline was about 20 km west of its present location. Circulation over the continental shelf in the map area (and in the broader northern California region) is dominated by the southward-flowing California Current, the eastern limb of the North Pacific Gyre. Associated upwelling brings cool, nutrient-rich waters to the surface, resulting in high biological productivity. The current flow generally is southeastward during the spring and summer; however, during the fall and winter, the otherwise persistent northwest winds are sometimes weak or absent, causing the California Current to move farther offshore and the Davidson Current, a weaker, northward-flowing countercurrent, to become active. Throughout the year, this part of the northern California coast is exposed to four wave climate regimes: the north Pacific swell, the southern swell, northwest wind waves, and local wind waves. The north Pacific swell dominates in winter months (typically November through March). During summer months, the largest waves come from the southern swell, generated by storms in the south Pacific and offshore of Central America. Northwest wind waves affect the coast throughout the year, whereas local wind waves are most common from October to April. Potential marine benthic habitat types in the Offshore of Fort Ross map area include unconsolidated continental-shelf sediments, mixed continental-shelf substrate, and hard continental-shelf substrate. Rocky shelf outcrops and rubble are considered the primary habitat type for rockfish and lingcod, both of which are recreationally and commercially important species.

California↗

Rock-weathering rates as functions of time

The scarcity of documented numerical relations between rock weathering and time has led to a common assumption that rates of weathering are linear. This assumption has been strengthened by studies that have calculated long-term average rates. However, little theoretical or empirical evidence exists to support linear rates for most chemical-weathering processes, with the exception of congruent dissolution processes. The few previous studies of rock-weathering rates that contain quantitative documentation of the relation between chemical weathering and time suggest that the rates of most weathering processes decrease with time. Recent studies of weathering rinds on basaltic and andesitic stones in glacial deposits in the western United States also clearly demonstrate that rock-weathering processes slow with time. Some weathering processes appear to conform to exponential functions of time, such as the square-root time function for hydration of volcanic glass, which conforms to the theoretical predictions of diffusion kinetics. However, weathering of mineralogically heterogeneous rocks involves complex physical and chemical processes that generally can be expressed only empirically, commonly by way of logarithmic time functions. Incongruent dissolution and other weathering processes produce residues, which are commonly used as measures of weathering. These residues appear to slow movement of water to unaltered material and impede chemical transport away from it. If weathering residues impede weathering processes then rates of weathering and rates of residue production are inversely proportional to some function of the residue thickness. This results in simple mathematical analogs for weathering that imply nonlinear time functions. The rate of weathering becomes constant only when an equilibrium thickness of the residue is reached. Because weathering residues are relatively stable chemically, and because physical removal of residues below the ground surface is slight, many weathering features require considerable time to reach constant rates of change. For weathering rinds on volcanic stones in the western United States, this time is at least 0.5 my.

Quaternary Research↗

Geochemistry of highly fractionated I- and S-type granites from the tin-tungsten province of western Tasmania

The Devonian batholiths of western Tasmania represent a diverse assemblage of highly fractionated intrusions (70 to 77 percent SiO 2 ) that are the products of different source materials. The Housetop batholith exhibits compositional affinities to a fluorine-rich I-type magma. The Meredith batholith also has characteristics indicative of I-type source materials. The Heemskirk batholith is composite, and consists of a volatile (F, B, H 2 O)–rich S-type granite underlying an I-type granite. The Three Hummock Island, Interview River, Sandy Cape, and Conical Rocks plutons probably have an S-type source and are grouped together as the Sandy Cape Suite. Rapakivi texture is common in the Housetop, Meredith, and Heemkirk batholiths. Quartz-tourmaline nodules are found in the Conical Rocks pluton and the S-type portion of the Heemskirk batholith. The Conical Rocks and Interview River plutons yield high initial Sr isotopic ratios of 0.74242 and 0.76009, respectively. The Housetop and Meredith batholiths yield the lowest initial Sr isotopic ratios of 0.71041 and 0.71445, respectively. The S-type portion of the Heemskirk batholith has an initial Sr isotopic ratio of 0.76387. The 40 Ar/ 39 Ar release spectrum and Rb/Sr mineral isochron analyses corroborate previously reported Devonian to Carboniferous age estimates for these batholiths. A relatively low-temperature thermal event (<200°C) caused argon loss from the K-feldspars at about 105 Ma. This heating event is probably related to the continental breakup of Australia from Antarctica. Major-element compositions of the western Tasmanian granites are very similar. The highly fractionated Sandy Cape Suite leucogranites exhibit high Ga/Al ratios typical of A-type granites, but not their extreme Zr, Y, or Ce enrichments. A distinctive feature of the Sandy Cape Suite is the increase in P 2 O 5 concentration with fractionation. The increase in P 2 O 5 with fractionation is apparently due to extremely low Ca activity, which precludes the formation of apatite, thus allowing P 2 O 5 to behave incompatibly in the melt. All of the granitoids have LREE–enriched chondrite-normalized rare earth element patterns. REE fractionation within the individual granitoids can be summarized by two trends: those with LREE >> HREE depletion (Housetop, Meredith, and Heemskirk batholiths), and those with LREE = HREE depletion (Sandy Cape Suite). The first trend is caused by the initial undersaturation of accessory mineral assemblage that resulted from high concentrations of volatiles and/or alkali complexes. The second trend is caused by early saturation of accessory phases and/or refractory accessory phases.

Tasmania↗

NGA-East Ground-Motion Characterization model part I: Summary of products and model development

In this article, we present an overview of the research project NGA-East, Next Generation Attenuation for Central and Eastern North America (CENA), and summarize the key methodology and products. The project was tasked with developing a new ground motion characterization (GMC) model for CENA. The final NGA-East GMC model includes a set of 17 median ground motion models (GMMs) for peak ground acceleration and velocity (PGA, PGV) and response spectral ordinates for periods ranging from 0.01 to 10 s. The NGA-East GMMs are applicable to horizontal components of ground motions on very hard rock, for the moment magnitude range of 4.0–8.2, and distances of up to 1500 km. The aleatory standard deviations of GMMs are also provided for site-specific analysis (single-station standard deviation) and for general probabilistic seismic hazard analyses (PSHA) applications (ergodic standard deviation). In addition, adjustment factors are provided for source depth and hanging-wall effects, as well as for hazard computations at sites in the Gulf Coast Region. During the course of the project, several innovative technologies were developed and implemented to increase the transparency and repeatability of the GMC building process. This involved expanding on a set of candidate median GMMs to define and capture an appropriate range of epistemic uncertainty in ground motions. We also developed a new approach for modeling the aleatory variability that was completely independent of the median GMMs. The development made extensive use of the CENA database but also borrowed data from other parts of the world when relevant and led to an integrated suite of models. Through this repeatable process, epistemic uncertainty could be quantified more objectively than before, relying less on expert opinion. The NGA-East project went through a comprehensive Seismic Senior Hazard Analysis Committee (SSHAC) Level 3 peer review process before its release.

Earthquake Spectra↗

Geology and ground-water resources of Montgomery County, Alabama

Montgomery County includes an area of 790 square miles in east-central Alabama. The economy of Montgomery County is related primarily to the growing and processing of agricultural products. The county is in the northern part of the Coastal Plain. It consists of parts of four divisions of the Coastal Plain: the terraces, the Black Prairie, the Chunnennuggee Hills, and the flood plains. The county drains north and northwest into the Alabama and Tallapoosa Rivers, except for a small area in the southern part of the county that is drained by tributaries of the Conecuh River. Sedimentary rocks of Late Cretaceous age underlie Montgomery County. They are divided, in ascending order, into the following: Coker and Gordo formations of the Tuscaloosa group; Eutaw formation; and Mooreville and Demopolis chalks, Ripley formation, Prairie Bluff chalk, and Providence sand of the Selma group. The Clayton formation of Tertiary age crops out in a small area in the southern part of the county. Pleistocene terrace deposits of the ancestral Alabama River overlie the older rocks in the northern part of the county. Recent alluvium underlies the flood plains of the larger streams. The Cretaceous and younger rocks consist chiefly of clay, chalk, sandstone, sand, and gravel, and a few thin beds of limestone. These deposits are underlain by a basement complex of pre-Cretaceous crystalline rocks. Large-scale withdrawals of water began in the Montgomery area about 1885. Pumpage by the city of Montgomery in 1958 averaged about 15 million gallons per day. It is estimated that an additional 10 to 15 million gallons per day was pumped in the county for industrial, irrigation, domestic, and stock use. The principal aquifer in the country is the Eutaw formation. It supplies water to the city of Montgomery municipal wells, to industrial wells in the Montgomery area, and to most domestic and stock wells in the northern two-thirds of the county. Irrigation wells also tap the Eutaw. Yields from wells range from 350 to 600 gallons per minute. The Gordo formation, the upper part of the Coker formation, and the Pleistocene terrace deposits in the Montgomery area also yield moderate to large quantities of water to municipal and industrial wells. The lower part of the Coker formation is not developed as a source of water supply, but information obtained during the investigation rthat led to this report indicates that it may be a potential source of water to wells of large capacity. Sand beds in the Ripley formation, Providence sand, and Recent alluvium in -the southern part of the county yield adequate amounts of water to domestic and stock wells. Most of the ground water used in Montgomery County occurs under artesian conditions, although water-table conditions occur in the Pleistocene terrace deposits and Recent alluvium, and in the outcrop areas of the Eutaw and Eipley formations and the Providence sand. Most of the water recharging the Ooker, Gordo, and Eutaw formations in their areas of outcrop also is discharged in these areas; only a small quantity of water moves downdip beneath the overlying chalk beds. The natural discharge, and hence the natural recharge, is estimated to be 0.2 to 0.3 million gallons per day per square mile of outcrop. All ground water in the county is of chemical quality that is satisfactory for most uses, although locally it is high in iron or chloride content and is hard. Water from the Eutaw formation a few miles southwest of Montgomery's West well field is very high in chloride content. This water moves toward the cone of depression in the piezometric surface produced by pumping in the West well field. Much additional ground water could be pumped from the Eutaw formation, especially south of Montgomery's West well field. Additional water also is available from the upper part of the Coker formation. Before large groundwater developments are planned, however, the problems of well spacing and pumping rates should be studied in order to determine the maximum development permitted by the supply. Observation wells should be installed in the Eutaw formation southwest of Montgomery's West well field to detect encroachment of water of high chloride content from adjacent Lowndes County.

Alabama↗

Undiscovered hydrocarbon resources in the U.S. Gulf Coast Jurassic Norphlet and Smackover Formations

The U.S. Geological Survey has completed assessments of undiscovered technically recoverable oil and gas resources in the Jurassic Norphlet and Smackover formations of the onshore coastal plain and State waters of the U.S. Gulf Coast. The Norphlet Formation consists of sandstones and interbedded shales and siltstones deposited during a marine transgression. Along its northeast margin, deposition of the Norphlet was in alluvial fans, fluvial systems, and dune and clastic sabkha environments. Mudstones of the underlying Smackover Formation act as source rocks for Norphlet reservoirs. The Norphlet was divided into the following three assessment units (AUs): the Norphlet Salt Basins and Updip AU, the Norphlet Mobile Bay Deep Gas AU, and the Norphlet South Texas Gas AU. The lower part of the Smackover consists primarily of dark carbonate mudstone and argillaceous limestone deposited in low-energy environments, and is one of the Gulf of Mexico Basin&rsquo;s major source rocks. The upper part of the Smackover is comprised primarily of grain-supported carbonates deposited in high-energy environments. The Smackover was divided into the following four AUs: the Smackover Updip and Peripheral Fault Zone AU, the Smackover Salt Basin AU, the Smackover South Texas AU, and the Smackover Downdip Continuous Gas AU. Although the Norphlet and Smackover formations have been the focus of extensive exploration and production, they probably still contain significant undiscovered oil and gas resources.

Alabama, Louisiana, Mississippi, Texas↗

Investigation of thallium fluxes from subaerial volcanism-Implications for the present and past mass balance of thallium in the oceans

A suite of 34 volcanic gas condensates and particulates from Kilauea (Hawaii), Mt. Etna and Vulcano (Italy), Mt. Merapi (Indonesia), White Island and Mt. Nguaruhoe (New Zealand) were analysed for both Tl isotope compositions and Tl/Pb ratios. When considered together with published Tl–Pb abundance data, the measurements provide globally representative best estimates of Tl/Pb = 0.46 ± 0.25 and ε 205 Tl = −1.7 ± 2.0 for the emissions of subaerial volcanism to the atmosphere and oceans (ε 205 Tl is the deviation of the 205 Tl/ 203 Tl isotope ratio from NIST SRM 997 isotope standard in parts per 10,000). Compared to igneous rocks of the crust and mantle, volcanic gases were found to have (i) Tl/Pb ratios that are typically about an order of magnitude higher, and (ii) significantly more variable Tl isotope compositions but a mean ε 205 Tl value that is indistinguishable from estimates for the Earth’s mantle and continental crust. The first observation can be explained by the more volatile nature of Tl compared to Pb during the production of volcanic gases, whilst the second reflects the contrasting and approximately balanced isotope fractionation effects that are generated by partial evaporation of Tl during magma degassing and partial Tl condensation as a result of the cooling and differentiation of volcanic gases.

Geochimica et Cosmochimica Acta↗

Hydrology of coal-lease areas near Durango, Colorado

The U.S. Bureau of Land Management leases Federal lands and minerals for coal mining near Durango, Colorado. This report addresses the hydrologic suitability of those lands for coal leasing; the report describes the general hydrology of the Durango area and, more specifically, the hydrology of the Stollsteimer Creek study area 32 miles east of the Durango and the Hay Gulch study area, 12 miles southwest of Durango. The most productive aquifers in the Durango study area are Quaternary alluvium and the tertiary Animas Formation. Water wells completed in alluvium typically yield 5 to 20 gallons/min; wells completed is the Animas Formation yield as much as 50 gallons/min. Water quality in these aquifers is variable, but it generally is suitable for domestic use. The coal-bearing Cretaceous Fruitland and Menefee Formations are mined by surface methods at the Chimney Rock Mine in the Stollsteimer Creek study area and by underground methods at the National King Coal Mine in the Hay Gulch study area. Effects of surface mining in the Stollsteimer Creek area are: (1) Dewatering of an alluvial aquifer; and (2) Local degradation of alluvium water quality by spoil-pile effluent. Effects of underground mining in the Hay Gulch area are: (1) Introduction of water with greater dissolved-solids concentrations into the upper Hay Gulch alluvium from mine runoff; (2) Subsidence fracturing which could dewater streams and the alluvial aquifer. (USGS)

Water-Resources Investigations Report↗

Field trip guidebook to the hydrogeology of the Rock-Fox River basin of Southeastern Wisconsin

On this trip we will examine some hydrogeologic characteristics of glacial features and emphasize ground-water management within the Rock-Fox River basin. Field stops will include the hydrogeology of a classical glacial terrane--the Kettle moraine--and the management of ground-water resources for industrial, municipal, agricultural, and fish-culture purposes. Descriptions of the geology, soils, water availability and characteristics, water quality, water use, and water problems within the basin are given in the accompanying U.S. Geological Survey Hydrologic Atlas (HA-360). This atlas is a product of the cooperative program of University Extension--the University of Wisconsin Geological and Natural History Survey.

Wisconsin↗