SEARCH · Geology Reports

Results for “Oregon Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51Linked to original sources

USGS2022

The Pondosa fault zone: A distributed dextral-normal-oblique fault system in northeastern California, USA

The tectonic domains of Basin and Range extension, Cascadia subduction zone contraction, and Walker Lane dextral transtension converge in the Mushroom Rock region of northeastern California, USA. We combined analysis of high-resolution topographic data, bedrock mapping, 40 Ar/ 39 Ar geochronology, low-temperature thermochronology, and existing geologic and fault mapping to characterize an extensive dextral-normal-oblique fault system called the Pondosa fault zone. This fault zone extends north-northwest from the Pit River east of Soldier Mountain, California, into moderately high-relief volcanic topography as far north as the Bartle (California) townsite with normal and dextral offset apparent in geomorphology and fault exposures. New and existing 40 Ar/ 39 Ar and radiocarbon dating of offset lava flows provides ages of 12.4 ka to 9.6 Ma for late Cenozoic stratigraphic units. Scarp morphology and geomorphic expression indicate that the fault system was active in the late Pleistocene. The Pondosa fault zone may represent a dextral-oblique accommodation zone between north-south–oriented Basin and Range extensional fault systems and/or part of the Sierra Nevada–Oregon Coast block microplate boundary.

California↗

USGS2017

Synthesis of downstream fish passage information at projects owned by the U.S. Army Corps of Engineers in the Willamette River Basin, Oregon

The U.S. Army Corps of Engineers (USACE) operates the Willamette Valley Project (Project) in northwestern Oregon, which includes a series of dams, reservoirs, revetments, and fish hatcheries. Project dams were constructed during the 1950s and 1960s on rivers that supported populations of spring Chinook salmon ( Oncorhynchus tshawytscha ), winter steelhead ( O. mykiss ), and other anadromous fish species in the Willamette River Basin. These dams, and the reservoirs they created, negatively affected anadromous fish populations. Efforts are currently underway to improve passage conditions within the Project and enhance populations of anadromous fish species. Research on downstream fish passage within the Project has occurred since 1960 and these efforts are documented in numerous reports and publications. These studies are important resources to managers in the Project, so the USACE requested a synthesis of existing literature that could serve as a resource for future decision-making processes. In 2016, the U.S. Geological Survey conducted an extensive literature review on downstream fish passage studies within the Project. We identified 116 documents that described studies conducted during 1960–2016. Each of these documents were obtained, reviewed, and organized by their content to describe the state-of-knowledge within four subbasins in the Project, which include the North Santiam, South Santiam, McKenzie, and Middle Fork Willamette Rivers. In this document, we summarize key findings from various studies on downstream fish passage in the Willamette Project. Readers are advised to review specific reports of interest to insure that study methods, results, and additional considerations are fully understood.

Oregon↗

USGS1997

Quality of shallow ground water in alluvial aquifers of the Willamette Basin, Oregon, 1993-95

The current (1993?95) quality of shallow ground water (generally, <25 meters below land surface) in Willamette Basin alluvium is described using results from two studies. A Study-Unit Survey, or regional assessment of shallow groundwater quality in alluvium, was done from June through August 1993. During the Study-Unit Survey, data were collected from 70 domestic wells chosen using a random-selection process and located mostly in areas of agricultural land use. An urban Land-Use Study, which was a reconnaissance of shallow urban ground-water quality from 10 monitoring wells installed in areas of residential land use, was done in July 1995. Concentrations of nitrite plus nitrate (henceforth, nitrate, because nitrite concentrations were low) ranged from <0.05 to 26 mg N/L (milligrams nitrogen per liter) in ground water from 70 Study-Unit-Survey wells; concentrations exceeded the U.S. Environmental Protection Agency (USEPA) Maximum Contaminant Level (MCL) of 10 mg N/L in 9 percent of Study-Unit-Survey samples. Relationships were observed between nitrate concentrations and dissolved-oxygen concentrations, the amount of clay present within and overlying aquifers, overlying geology, and upgradient land use. Tritium (3H) data indicate that 21 percent of Study-Unit-Survey samples represented water recharged prior to 1953. Nitrogen-fertilizer application rates in the basin have increased greatly over the past several decades. Thus, some observed nitrate concentrations may reflect nitrogen loading rates that were smaller than those presently applied in the basin. Concentrations of phosphorus ranged from <0.01 to 2.2 mg/L in 70 Study-Unit-Survey wells and exceeded 0.10 mg/L in 60 percent of the samples. Phosphorus and nitrate concentrations were inversely correlated. From 1 to 5 pesticides and pesticide degradation products (henceforth, pesticides) were detected in ground water from each of 23 Study-Unit-Survey wells (33 percent of 69 wells sampled for pesticides) for a total of 51 pesticide detections. Thirteen different pesticides were detected; atrazine was the most frequently encountered pesticide. Although detections were widespread, concentrations were low (generally <1,000 ng/L [nanograms per liter]). (One ng/L is equal to 0.001 mg/L [micrograms per liter].) One detection (dinoseb, at 7,900 ng/L) exceeded a USEPA MCL. Relationships were observed between the occurrence of pesticides and the amount of clay present within and overlying aquifers, overlying geology, and land use. Between 1 and 5 volatile organic compounds (VOCs) were detected at each of 7 Study-Unit-Survey sites (11 percent of 65 sites evaluated), for a total of 14 VOC detections. One detection (tetrachloroethylene, at 29 mg/L) exceeded a USEPA MCL. Other detections were at low concentrations (0.2 to 2.0 mg/L). VOC detections generally were from sites associated with urban land use. Concentrations of arsenic ranged from <1 to 13 mg/L in 70 Study-Unit-Survey wells. Concentrations in 16 percent of samples exceeded the USEPA Risk-Specific-Dose Health Advisory of 2 mg/L. Radon concentrations ranged from 200 to 1,200 pCi/L (picocuries per liter) in 51 Study-Unit-Survey wells. All samples exceeded the USEPA Risk-Specific-Dose Health Advisory of 150 pCi/L. All urban Land-Use-Study samples were well oxygenated; thus, nitrate reduction probably did not affect these samples. Urban Land-Use-Study nitrate concentrations were similar to those of the well oxygenated, agricultural subset of Study-Unit-Survey samples. Pesticides were detected in samples from three urban Land-Use-Study sites, but concentrations were low (1 to 5 ng/L). In contrast, VOCs were detected in ground water from 80 percent of urban Land-Use-Study wells; concentrations ranged up to 7.6 mg/L. Trace-element concentrations in the urban Land-Use Study samples were low. Median concentrations consistently were <10 mg/L and frequently were <1 mg/L

Water-Resources Investigations Report↗

USGS2020

Systematic characterization of morphotectonic variability along the Cascadia convergent margin: Implications for shallow megathrust behavior and tsunami hazards

Studies of recent destructive megathrust earthquakes and tsunamis along subduction margins in Japan, Sumatra, and Chile have linked forearc morphology and structure to megathrust behavior. This connection is based on the idea that spatial variations in the frictional behavior of the megathrust influence the tectono-morphological evolution of the upper plate. Here we present a comprehensive examination of the tectonic geomorphology, outer wedge taper, and structural vergence along the marine forearc of the Cascadia subduction zone (offshore northwestern North America). The goal is to better understand geologic controls on outer wedge strength and segmentation at spatial scales equivalent to rupture lengths of large earthquakes (≥M 6.7), and to examine potential linkages with shallow megathrust behavior. We use cross-margin profiles, spaced 25 km apart, to characterize along-strike variation in outer wedge width, steepness, and structural vergence (measured between the toe and the outer arc high). The width of the outer wedge varies between 17 and 93 km, and the steepness ranges from 0.9° to 6.5°. Hierarchical cluster analysis of outer wedge width and steepness reveals four distinct regions that also display unique patterns of structural vergence and shape of the wedge: Vancouver Island, British Columbia, Canada (average width, linear wedge, seaward and mixed vergence); Washington, USA (higher width, concave wedge, landward and mixed vergence); northern and central Oregon, USA (average width, linear and convex wedge, mixed and seaward vergence); and southern Oregon and northern California, USA (lower width, convex wedge, seaward and mixed vergence). Variability in outer wedge morphology and structure is broadly associated with along-strike megathrust segmentation inferred from differences in oceanic asthenospheric velocities, patterns of episodic tremor and slow slip, GPS models of plate locking, and the distribution of seismicity near the plate interface. In more detail, our results appear to delineate the extent, geometry, and lithology of dynamic and static backstops along the margin. Varying backstop configurations along the Cascadia margin are interpreted to represent material-strength contrasts within the wedge that appear to regulate the along- and across-strike taper and structural vergence in the outer wedge. We argue that the morphotectonic variability in the outer wedge may reflect spatial variations in shallow megathrust behavior occurring over roughly the last few million years. Comparing outer wedge taper along the Cascadia margin to a global compilation suggests that observations in the global catalog are not accurately representing the range of heterogeneity within individual margins and highlights the need for detailed margin-wide morphotectonic analyses of subduction zones worldwide.

British Columbia, California, Oregon, Washington↗

USGS2015

National assessment of shoreline change: historical change along the north coast of Alaska, U.S.-Canadian border to Icy Cape

Beach erosion is a persistent problem along most open-ocean shores of the United States. Along the Arctic coast of Alaska, coastal erosion is widespread, may be accelerating, and is threatening defense and energy-related infrastructure, coastal habitats, and Native communities. As coastal populations continue to expand and infrastructure and habitat are increasingly threatened by erosion, there is increased demand for accurate information regarding past and present trends and rates of shoreline movement. There also is a need for a comprehensive analysis of shoreline change with metrics that are consistent from one coastal region to another. To meet these national needs, the U.S. Geological Survey is conducting an analysis of historical shoreline changes along the open-ocean sandy shores of the conterminous United States and parts of Hawaii, Alaska, and the Great Lakes. One purpose of this work is to develop standard, repeatable methods for mapping and analyzing shoreline change so that periodic, systematic, and internally consistent updates regarding coastal erosion and land loss can be made nationally. This report on shoreline change along the north coast of Alaska, between the U.S.-Canadian border and Icy Cape, is one in a series of regionally focused reports on historical shoreline change. Previous investigations include analyses and descriptive reports for the coasts of the U.S. Gulf of Mexico, the Southeast Atlantic, California, the New England and Mid-Atlantic, portions of Hawaii, and the Pacific Northwest coasts of Oregon and Washington. Similar to the earlier reports in this series, this report summarizes the methods of analysis, documents and describes the results of the analysis, and explains historical trends and rates of shoreline change. This Alaska shoreline change assessment differs from previously published shoreline change assessments in that: (1) only two historical shorelines (from the 1940s and 2000s eras) were available for the Alaska study area whereas four or more shorelines (from 1850 to 2002) were available for the other assessments and, thus, only end-point rates for one long-term analysis period are reported here, compared to a combination of long-term and short-term rates as reported in other studies; (2) modern (2000s era) shorelines in this study represent a visually derived land-water interface position versus an elevation based, tidally referenced shoreline position; and (3) both exposed open-ocean and sheltered mainland-lagoon shorelines and rates of change are included in this study compared to other locations where only exposed open-ocean sandy shorelines or bluff edges were evaluated. No distinction was made between sand or gravel beaches, and the base of the unconsolidated coastal bluff was considered the shoreline where no fronting beach existed.

Alaska↗

USGS2025

Assessment of channel morphology, hydraulics, and bedload transport along the Siletz River, western Oregon

Significant Findings Chinook salmon ( Oncorhynchus tshawytscha ) and Pacific lamprey ( Entosphenus tridentatus ) are native, anadromous fish species in the Siletz River Basin, western Oregon, that face many threats to their survival in freshwater and the ocean. The Confederated Tribes of Siletz Indians of Oregon seek to mitigate freshwater threats to Chinook salmon and Pacific lamprey, where possible, with habitat conservation and restoration efforts. This study was conducted to assist the Confederated Tribes of Siletz Indians of Oregon in documenting and understanding the hydrogeomorphic processes shaping present-day habitat conditions and assessing future habitat implications for Chinook salmon and Pacific lamprey along the main-stem Siletz River. As such, this study focused on understanding geomorphic processes and patterns of channel change, including lateral and vertical adjustments in channel position and changes in bed-material sediment (sands, gravels, and cobbles that mantle the channel bed), which collectively determine overall patterns of channel morphology and fluvial habitats. Objective One was to evaluate lateral changes in channel position, vertical changes in bed elevation, and longitudinal patterns in bed-material particle size along the Siletz River using detailed channel maps developed from aerial photographs collected from 1939 to 2016, long-term records of stage and discharge collected by the U.S. Geological Survey (USGS) near the City of Siletz, and sediment particle size data. Objective Two was to assess hydraulic conditions using one- and two-dimensional hydraulic models and transport capacity of bed-material sediment using bedload transport models and sediment particle size data for a range of discharge conditions. Objective Three was to identify potential burrowing habitat for lamprey larvae (PBH) along the Siletz River network and provide insights in local factors influencing PBH along the main-stem Siletz River. The overall findings are synthesized to describe habitat implications for Chinook salmon and Pacific lamprey under present-day and future conditions. Results of Objective One, an evaluation of changes in channel position and bed elevations and longitudinal patterns in bed-material particle size along the Siletz River, include the following From 1939 to 2016, channel planform and the mapped area of gravel bars did not change considerably along the 97.2-kilometers (km) of Siletz River between Elk Creek and Millport Slough, except for in short sections generally less than 1 km long. This inherent lateral channel stability results from the resistant bedrock and terraces that bound most of the channel and limit lateral changes in channel position. Intermittent sections along the study reach where the active channel widened at channel bends displayed noticeable planform changes and increases in mapped bar area. From water year (WY; a 12-month period from October 1 through September 30 and named for the year in which it ends) 1906 to 2021, changes in the stage-discharge relation interpreted as rising and lowering channel bed levels were observed at the USGS streamgage 14305500 (Siletz River at Siletz, OR) in response to floods (such as high flows in February 1996 and January 2002 that exceeded 0.1 and 0.667 annual exceedance probabilities [AEP] events, respectively). However, the rating curve representing the stage-discharge relation did not change in response to high-magnitude floods between 2007 and 2021. Along the approximately 54-km of the Siletz River between Moonshine Park and the Bulls Bag area, surficial particle distributions varied considerably between sampling sites in response to changes in channel width and gradient, sediment inputs from tributaries, and basin geology. Despite this variability, median particle sizes tended to decrease in size in the downstream direction over the 54 km. Results of Objective Two, an evaluation of hydraulic and bedload transport conditions along the Siletz River, include the following The most substantial increases in maximum and mean water velocity and bedload sediment transport capacity occurred at events between the 0.995 and 0.50 AEPs. Events of these magnitudes occur approximately every 1–2 years. Smaller events (0.995 AEP) are generally contained by the banks of the main channel, whereas larger events (0.50 AEP) generally spill over the banks and inundate high-elevation bar and low-elevation floodplain surfaces. Multiple smaller floods within a WY that exceed the 0.995 and 0.50 AEPs (such as in WY 1996) can transport as much or more bed-material sediment than a single, higher magnitude event (such as the maximum event recorded in WY 2000 with an estimated AEP of around 0.002). Bedload transport capacity generally exceeds sediment supply (greater than 2 millimeters [mm]) for most of the study area from Wildcat Creek to the City of Siletz as evidenced by substantial in-channel bedrock. Despite overall conditions of limited sediment supply, transport capacity still varies considerably within and between years with discharge magnitude and spatially in relation to local hydraulics imposed by bedrock, channel morphology, and human infrastructure (such as bridges). Results of Objective Three, an analysis of PBH for lamprey larvae, include the following About 28 percent of the Siletz River network meets the mean annual suspended sediment loads and channel slope criteria for PBH. Along the main-stem Siletz River, in-channel bedrock outcrops and high transport capacity are expected to further constrain PBH. Together, these results suggest that most of the Siletz River between Wildcat Creek and the City of Siletz has had only modest vertical and lateral change between the 1930s and 2010s because of the bedrock in and along the main channel and the river’s relatively high transport capacity relative to bed-material sediment supply. However, localized sections of the Siletz River where the active channel widens, particularly at channel bends, exhibited some change in channel planform and the locations and area of gravel bars. In the future, moderate increases in autumn-winter discharge may not result in substantial changes in coarse gravel bars along the Siletz River but may result in selective transport of finer bed-material sediment (gravel, sands, and silts) that provide spawning habitats for Chinook salmon and Pacific lamprey and burrowing habitats for lamprey larvae. Assuming no substantial changes in bed-material sediment supply, increased bedload transport capacity may cause frequent entrainment of lamprey larvae that are burrowed in coarse sand deposits, suspension and downstream transport of salmon eggs incubating in gravels, and reductions in the areas of spawning gravels for Chinook salmon and Pacific lamprey. Exact implications of current and future discharge conditions for these species along the Siletz River depends on many factors, including sediment supply, local hydraulics, and the timing of flood events relative to fish life stages.

Oregon↗

USGS2011

Columbia River Estuary ecosystem classification—Concept and application

This document describes the concept, organization, and application of a hierarchical ecosystem classification that integrates saline and tidal freshwater reaches of estuaries in order to characterize the ecosystems of large flood plain rivers that are strongly influenced by riverine and estuarine hydrology. We illustrate the classification by applying it to the Columbia River estuary (Oregon-Washington, USA), a system that extends about 233 river kilometers (rkm) inland from the Pacific Ocean. More than three-quarters of this length is tidal freshwater. The Columbia River Estuary Ecosystem Classification ("Classification") is based on six hierarchical levels, progressing from the coarsest, regional scale to the finest, localized scale: (1) Ecosystem Province; (2) Ecoregion; (3) Hydrogeomorphic Reach; (4) Ecosystem Complex; (5) Geomorphic Catena; and (6) Primary Cover Class. We define and map Levels 1-3 for the entire Columbia River estuary with existing geospatial datasets, and provide examples of Levels 4-6 for one hydrogeomorphic reach. In particular, three levels of the Classification capture the scales and categories of ecosystem structure and processes that are most tractable to estuarine research, monitoring, and management. These three levels are the (1) eight hydrogeomorphic reaches that embody the formative geologic and tectonic processes that created the existing estuarine landscape and encompass the influence of the resulting physiography on interactions between fluvial and tidal hydrology and geomorphology across 230 kilometers (km) of estuary, (2) more than 15 ecosystem complexes composed of broad landforms created predominantly by geologic processes during the Holocene, and (3) more than 25 geomorphic catenae embedded within ecosystem complexes that represent distinct geomorphic landforms, structures, ecosystems, and habitats, and components of the estuarine landscape most likely to change over short time periods.

Columbia River Estuary↗

USGS1964

Officer's cave, a pseudokarst feature in altered tuff and volcanic ash of the John Day formation in eastern Oregon

Officer 's Cave is the uppermost of four rapidly eroding cave levels constituting a cavern complex about 700 feet long developed chiefly in clay and silt. Its outer room is 35 feet by 43.5 feet by 100 feet and slopes about 45° east into the western end of a narrow linear hill called Officer 's Cave Ridge. Dry valleys, blind valleys, hanging valleys, sinkholes, pipes, caves, and natural bridges are abundant. These, together with subterranean drainage, give the area a karstlike development. For such terrains the term " pseudokarst " is applied. These pseudokarsts are the product of piping and are fairly widespread over the world's drylands.

Oregon↗

USGS2025

The influence of pre-existing structures on geothermal springs: Inferences from potential field mapping in Surprise Valley, CA and other sites In the northwestern Great Basin

Surprise Valley, located in the northwestern Great Basin, is an asymmetric extensional basin that marks a major tectonic transition between the relatively un-extended volcanic Modoc Plateau to the west, and the Basin and Range to the east that has undergone 10-15% extension. In addition, it sits just north of the Walker Lane which accommodates up to 20% of dextral slip associated with Pacific-North American plate interactions. Thermal springs issue from eight areas within Surprise Valley. Most of these occur within the basin and are not situated on the main basin forming range-front faults. As a result, efforts to resolve the structural setting of the valley’s hydrothermal system have relied on geophysics to characterize basin structure and geology. Extensive efforts to map the basin with ground and airborne magnetics have revealed a >35 km-long linear, intra-basin magnetic high, interpreted as a buried dike swarm. Geothermal springs on the eastern side of the valley, including Seifert hot springs, Leonards hot springs, and Surprise Valley hot springs (SVHS), are all situated along the magnetic high and occur at local breaks and bends in the anomaly, suggesting that fracture permeability is enhanced along the feature and particularly at these discontinuities. Recent studies, including drilling over the anomaly near SVHS that likely intersected dike material, as well as subsequent mapping and sampling of dikes outcropping along the anomaly on the playa surface south of SVHS, confirm (as previously inferred) that mafic intrusives are the principal source of the anomaly. Similar interpretations made in two other valleys (in southern Oregon and northwestern Nevada), where inferred intra-basin dikes appear to be spatially correlated with hot springs or prospective geothermal resource areas, suggest that the impact of pre-existing basement structure on hydrothermal activity may pertain more generally to other hydrothermal settings throughout the Great Basin. If so, efforts to map basement may enhance understanding structural controls on some geothermal systems. Furthermore, similarities across these disparate sites suggest that magmatism may play a much larger role in accommodating extension and influencing basin evolution across the western Great Basin than previously recognized.

Conference Paper↗

USGS1998

Water-quality and algal conditions in the North Umpqua River Basin, Oregon, 1992-95, and implications for resource management

This report describes the results of a synoptic water-quality and algal investigation during July 1995 at 36 stream sites in a 1,350 square-mile area of the North Umpqua River Basin, Oregon. The study area includes a headwaters hydroelectric project area, a Wild and Scenic reach in the main stem immediately downstream, and the watersheds of several major tributaries. Additional data from previous investigations are reviewed, and impacts on water quality in the Wild and Scenic reach from resource management, including forestry and reservoir operations, are inferred where sufficient data exist. Water-quality standards were occasionally exceeded for dissolved oxygen and pH, and daily maximum stream temperatures in the Wild and Scenic reach were higher than both the 1996 standard for the State of Oregon and the optimal temperature ranges for many anadromous fish. Dissolved oxygen in the basin was controlled more by stream temperature and reaeration than by primary production. Arsenic concentrations in the river during low flow (1 µg/L [microgram per liter]) indicate a potential cancer risk of between 1:5,000 and 1:20,000 for people using the river as a source of drinking water and fish for consumption. Streambed-sediment concentrations of arsenic, chromium, copper, manganese, and nickel were approximately double the sediment-quality criteria values adopted by New York State and by the Ontario Ministry of the Environment. High concentrations of phosphorus in bed sediments indicated that much of the phosphorus observed in the water column throughout the basin (medians: 32, 9, and 50 µg/L in the main stem, tributaries, and hydroelectric project areas, respectively) could have been geologically derived. Inorganic and organic nitrogen concentrations in water were mostly below minimum reporting limits (5 and 200 µg/L, respectively), indicating severe nitrogen limitation at most locations. Benthic algal biomass, biovolume, and chlorophyll a concentrations were highest at the sites directly below impoundments and at one headwater tributary (medians: 46 grams per square meter, 821 million cubic micrometers per square centimeter, and 126 milligrams per square meter, respectively), and were also somewhat elevated downstream in the Wild and Scenic reach compared with those in similar streams in the Pacific Northwest. Classification of the algal taxa indicated that, among all sites sampled, alkaliphilic taxa, nitrogen fixing taxa, and eutrophic taxa were the most abundant on the basis of biovolume and density. Cold-water taxa, facultative nitrogen heterotrophs, and oligotrophic taxa constituted the remainder of the taxa. Multivariate analyses indicated that algal communities at the hydroelectric-project-affected sites were distinct from communities at sites on the main stem and Steamboat Creek. At many locations, the river’s algal community might be compensating for the low nitrogen concentrations by fixation of atmospheric nitrogen or through heterotrophic assimilation of organic nitrogen. Water quality in the Wild and Scenic reach is dominated by water released from the hydroelectric project area during summer. Effects of the hydroelectric project include seasonal control of streamflow, water temperature, and phosphorus concentrations, and the possible release of low but ecologically important concentrations of organic nitrogen. A review of available data and literature suggests that the reservoirs can increase the interception of sediments and large organic debris, and promote their conversion into fine-grained particulate and dissolved organic matter for downstream transport. These effects could be compounded by the effects of forestry in the basin, including alteration of hydrologic cycles, changes in sediment and nutrient runoff, reductions of the transport of large woody debris, and degradation of habitat quality. It is hypothesized that, in the North Umpqua River, these processes have induced a fundamental shift in the river’s food web, from a detritus-based system to a system with a 2 higher emphasis on algal production. Confirmation of these changes and their effects on higher trophic levels are needed to properly manage the aquatic resources for all designated beneficial uses in the basin.

Oregon↗

USGS2010

Attributes for NHDPlus Catchments (Version 1.1) for the Conterminous United States: Average Monthly Precipitation, 2002

This data set represents the average monthly precipitation in millimeters multiplied by 100 for 2002 compiled for every catchment of NHDPlus for the conterminous United States. The source data were the Near-Real-Time Monthly High-Resolution Precipitation Climate Data Set for the Conterminous United States (2002) raster dataset produced by the Spatial Climate Analysis Service at Oregon State University. The NHDPlus Version 1.1 is an integrated suite of application-ready geospatial datasets that incorporates many of the best features of the National Hydrography Dataset (NHD) and the National Elevation Dataset (NED). The NHDPlus includes a stream network (based on the 1:100,00-scale NHD), improved networking, naming, and value-added attributes (VAAs). NHDPlus also includes elevation-derived catchments (drainage areas) produced using a drainage enforcement technique first widely used in New England, and thus referred to as "the New England Method." This technique involves "burning in" the 1:100,000-scale NHD and when available building "walls" using the National Watershed Boundary Dataset (WBD). The resulting modified digital elevation model (HydroDEM) is used to produce hydrologic derivatives that agree with the NHD and WBD. Over the past two years, an interdisciplinary team from the U.S. Geological Survey (USGS), and the U.S. Environmental Protection Agency (USEPA), and contractors, found that this method produces the best quality NHD catchments using an automated process (USEPA, 2007). The NHDPlus dataset is organized by 18 Production Units that cover the conterminous United States. The NHDPlus version 1.1 data are grouped by the U.S. Geologic Survey's Major River Basins (MRBs, Crawford and others, 2006). MRB1, covering the New England and Mid-Atlantic River basins, contains NHDPlus Production Units 1 and 2. MRB2, covering the South Atlantic-Gulf and Tennessee River basins, contains NHDPlus Production Units 3 and 6. MRB3, covering the Great Lakes, Ohio, Upper Mississippi, and Souris-Red-Rainy River basins, contains NHDPlus Production Units 4, 5, 7 and 9. MRB4, covering the Missouri River basins, contains NHDPlus Production Units 10-lower and 10-upper. MRB5, covering the Lower Mississippi, Arkansas-White-Red, and Texas-Gulf River basins, contains NHDPlus Production Units 8, 11 and 12. MRB6, covering the Rio Grande, Colorado and Great Basin River basins, contains NHDPlus Production Units 13, 14, 15 and 16. MRB7, covering the Pacific Northwest River basins, contains NHDPlus Production Unit 17. MRB8, covering California River basins, contains NHDPlus Production Unit 18.

Data Series↗

USGS2010

Attributes for NHDPlus Catchments (Version 1.1) for the Conterminous United States: 30-Year Average Annual Precipitation, 1971-2000

This data set represents the 30-year (1971-2000) average annual precipitation in millimeters multiplied by 100 compiled for every catchment of NHDPlus for the conterminous United States. The source data were the "United States Average Monthly or Annual Precipitation, 1971 - 2000" raster dataset produced by the PRISM Group at Oregon State University. The NHDPlus Version 1.1 is an integrated suite of application-ready geospatial datasets that incorporates many of the best features of the National Hydrography Dataset (NHD) and the National Elevation Dataset (NED). The NHDPlus includes a stream network (based on the 1:100,00-scale NHD), improved networking, naming, and value-added attributes (VAAs). NHDPlus also includes elevation-derived catchments (drainage areas) produced using a drainage enforcement technique first widely used in New England, and thus referred to as "the New England Method." This technique involves "burning in" the 1:100,000-scale NHD and when available building "walls" using the National Watershed Boundary Dataset (WBD). The resulting modified digital elevation model (HydroDEM) is used to produce hydrologic derivatives that agree with the NHD and WBD. Over the past two years, an interdisciplinary team from the U.S. Geological Survey (USGS), and the U.S. Environmental Protection Agency (USEPA), and contractors, found that this method produces the best quality NHD catchments using an automated process (USEPA, 2007). The NHDPlus dataset is organized by 18 Production Units that cover the conterminous United States. The NHDPlus version 1.1 data are grouped by the U.S. Geologic Survey's Major River Basins (MRBs, Crawford and others, 2006). MRB1, covering the New England and Mid-Atlantic River basins, contains NHDPlus Production Units 1 and 2. MRB2, covering the South Atlantic-Gulf and Tennessee River basins, contains NHDPlus Production Units 3 and 6. MRB3, covering the Great Lakes, Ohio, Upper Mississippi, and Souris-Red-Rainy River basins, contains NHDPlus Production Units 4, 5, 7 and 9. MRB4, covering the Missouri River basins, contains NHDPlus Production Units 10-lower and 10-upper. MRB5, covering the Lower Mississippi, Arkansas-White-Red, and Texas-Gulf River basins, contains NHDPlus Production Units 8, 11 and 12. MRB6, covering the Rio Grande, Colorado and Great Basin River basins, contains NHDPlus Production Units 13, 14, 15 and 16. MRB7, covering the Pacific Northwest River basins, contains NHDPlus Production Unit 17. MRB8, covering California River basins, contains NHDPlus Production Unit 18.

Data Series↗

USGS2010

Attributes for NHDPlus catchments (version 1.1) for the conterminous United States: Average Annual Daily Maximum Temperature, 2002

This data set represents the average monthly maximum temperature in Celsius multiplied by 100 for 2002 compiled for every catchment of NHDPlus for the conterminous United States. The source data were the Near-Real-Time High-Resolution Monthly Average Maximum/Minimum Temperature for the Conterminous United States for 2002 raster dataset produced by the Spatial Climate Analysis Service at Oregon State University. The NHDPlus Version 1.1 is an integrated suite of application-ready geospatial datasets that incorporates many of the best features of the National Hydrography Dataset (NHD) and the National Elevation Dataset (NED). The NHDPlus includes a stream network (based on the 1:100,00-scale NHD), improved networking, naming, and value-added attributes (VAAs). NHDPlus also includes elevation-derived catchments (drainage areas) produced using a drainage enforcement technique first widely used in New England, and thus referred to as "the New England Method." This technique involves "burning in" the 1:100,000-scale NHD and when available building "walls" using the National Watershed Boundary Dataset (WBD). The resulting modified digital elevation model (HydroDEM) is used to produce hydrologic derivatives that agree with the NHD and WBD. Over the past two years, an interdisciplinary team from the U.S. Geological Survey (USGS), and the U.S. Environmental Protection Agency (USEPA), and contractors, found that this method produces the best quality NHD catchments using an automated process (USEPA, 2007). The NHDPlus dataset is organized by 18 Production Units that cover the conterminous United States. The NHDPlus version 1.1 data are grouped by the U.S. Geologic Survey's Major River Basins (MRBs, Crawford and others, 2006). MRB1, covering the New England and Mid-Atlantic River basins, contains NHDPlus Production Units 1 and 2. MRB2, covering the South Atlantic-Gulf and Tennessee River basins, contains NHDPlus Production Units 3 and 6. MRB3, covering the Great Lakes, Ohio, Upper Mississippi, and Souris-Red-Rainy River basins, contains NHDPlus Production Units 4, 5, 7 and 9. MRB4, covering the Missouri River basins, contains NHDPlus Production Units 10-lower and 10-upper. MRB5, covering the Lower Mississippi, Arkansas-White-Red, and Texas-Gulf River basins, contains NHDPlus Production Units 8, 11 and 12. MRB6, covering the Rio Grande, Colorado and Great Basin River basins, contains NHDPlus Production Units 13, 14, 15 and 16. MRB7, covering the Pacific Northwest River basins, contains NHDPlus Production Unit 17. MRB8, covering California River basins, contains NHDPlus Production Unit 18.

Data Series↗

USGS2010

Attributes for NHDPlus catchments (version 1.1) for the conterminous United States: 30-year average annual maximum temperature, 1971-2000

This data set represents the 30-year (1971-2000) average annual maximum temperature in Celsius multiplied by 100 compiled for every catchment of NHDPlus for the conterminous United States. The source data were the United States Average Monthly or Annual Minimum Temperature, 1971 - 2000 raster dataset produced by the PRISM Group at Oregon State University. The NHDPlus Version 1.1 is an integrated suite of application-ready geospatial datasets that incorporates many of the best features of the National Hydrography Dataset (NHD) and the National Elevation Dataset (NED). The NHDPlus includes a stream network (based on the 1:100,00-scale NHD), improved networking, naming, and value-added attributes (VAAs). NHDPlus also includes elevation-derived catchments (drainage areas) produced using a drainage enforcement technique first widely used in New England, and thus referred to as "the New England Method." This technique involves "burning in" the 1:100,000-scale NHD and when available building "walls" using the National Watershed Boundary Dataset (WBD). The resulting modified digital elevation model (HydroDEM) is used to produce hydrologic derivatives that agree with the NHD and WBD. Over the past two years, an interdisciplinary team from the U.S. Geological Survey (USGS), and the U.S. Environmental Protection Agency (USEPA), and contractors, found that this method produces the best quality NHD catchments using an automated process (USEPA, 2007). The NHDPlus dataset is organized by 18 Production Units that cover the conterminous United States. The NHDPlus version 1.1 data are grouped by the U.S. Geologic Survey's Major River Basins (MRBs, Crawford and others, 2006). MRB1, covering the New England and Mid-Atlantic River basins, contains NHDPlus Production Units 1 and 2. MRB2, covering the South Atlantic-Gulf and Tennessee River basins, contains NHDPlus Production Units 3 and 6. MRB3, covering the Great Lakes, Ohio, Upper Mississippi, and Souris-Red-Rainy River basins, contains NHDPlus Production Units 4, 5, 7 and 9. MRB4, covering the Missouri River basins, contains NHDPlus Production Units 10-lower and 10-upper. MRB5, covering the Lower Mississippi, Arkansas-White-Red, and Texas-Gulf River basins, contains NHDPlus Production Units 8, 11 and 12. MRB6, covering the Rio Grande, Colorado and Great Basin River basins, contains NHDPlus Production Units 13, 14, 15 and 16. MRB7, covering the Pacific Northwest River basins, contains NHDPlus Production Unit 17. MRB8, covering California River basins, contains NHDPlus Production Unit 18.

Data Series↗

USGS2010

Attributes for NHDPlus Catchments (Version 1.1) for the Conterminous United States: Average Annual Daily Minimum Temperature, 2002

This data set represents the average monthly minimum temperature in Celsius multiplied by 100 for 2002 compiled for every catchment of NHDPlus for the conterminous United States. The source data were the Near-Real-Time High-Resolution Monthly Average Maximum/Minimum Temperature for the Conterminous United States for 2002 raster dataset produced by the Spatial Climate Analysis Service at Oregon State University. The NHDPlus Version 1.1 is an integrated suite of application-ready geospatial datasets that incorporates many of the best features of the National Hydrography Dataset (NHD) and the National Elevation Dataset (NED). The NHDPlus includes a stream network (based on the 1:100,00-scale NHD), improved networking, naming, and value-added attributes (VAAs). NHDPlus also includes elevation-derived catchments (drainage areas) produced using a drainage enforcement technique first widely used in New England, and thus referred to as "the New England Method." This technique involves "burning in" the 1:100,000-scale NHD and when available building "walls" using the National Watershed Boundary Dataset (WBD). The resulting modified digital elevation model (HydroDEM) is used to produce hydrologic derivatives that agree with the NHD and WBD. Over the past two years, an interdisciplinary team from the U.S. Geological Survey (USGS), and the U.S. Environmental Protection Agency (USEPA), and contractors, found that this method produces the best quality NHD catchments using an automated process (USEPA, 2007). The NHDPlus dataset is organized by 18 Production Units that cover the conterminous United States. The NHDPlus version 1.1 data are grouped by the U.S. Geologic Survey's Major River Basins (MRBs, Crawford and others, 2006). MRB1, covering the New England and Mid-Atlantic River basins, contains NHDPlus Production Units 1 and 2. MRB2, covering the South Atlantic-Gulf and Tennessee River basins, contains NHDPlus Production Units 3 and 6. MRB3, covering the Great Lakes, Ohio, Upper Mississippi, and Souris-Red-Rainy River basins, contains NHDPlus Production Units 4, 5, 7 and 9. MRB4, covering the Missouri River basins, contains NHDPlus Production Units 10-lower and 10-upper. MRB5, covering the Lower Mississippi, Arkansas-White-Red, and Texas-Gulf River basins, contains NHDPlus Production Units 8, 11 and 12. MRB6, covering the Rio Grande, Colorado and Great Basin River basins, contains NHDPlus Production Units 13, 14, 15 and 16. MRB7, covering the Pacific Northwest River basins, contains NHDPlus Production Unit 17. MRB8, covering California River basins, contains NHDPlus Production Unit 18.

Data Series↗

USGS2010

Attributes for NHDPlus Catchments (Version 1.1) for the Conterminous United States: 30-Year Average Annual Minimum Temperature, 1971-2000

This data set represents the 30-year (1971-2000) average annual minimum temperature in Celsius multiplied by 100 compiled for every catchment of NHDPlus for the conterminous United States. The source data were the "United States Average Monthly or Annual Minimum Temperature, 1971 - 2000" raster dataset produced by the PRISM Group at Oregon State University. The NHDPlus Version 1.1 is an integrated suite of application-ready geospatial datasets that incorporates many of the best features of the National Hydrography Dataset (NHD) and the National Elevation Dataset (NED). The NHDPlus includes a stream network (based on the 1:100,00-scale NHD), improved networking, naming, and value-added attributes (VAAs). NHDPlus also includes elevation-derived catchments (drainage areas) produced using a drainage enforcement technique first widely used in New England, and thus referred to as "the New England Method." This technique involves "burning in" the 1:100,000-scale NHD and when available building "walls" using the National Watershed Boundary Dataset (WBD). The resulting modified digital elevation model (HydroDEM) is used to produce hydrologic derivatives that agree with the NHD and WBD. Over the past two years, an interdisciplinary team from the U.S. Geological Survey (USGS), and the U.S. Environmental Protection Agency (USEPA), and contractors, found that this method produces the best quality NHD catchments using an automated process (USEPA, 2007). The NHDPlus dataset is organized by 18 Production Units that cover the conterminous United States. The NHDPlus version 1.1 data are grouped by the U.S. Geologic Survey's Major River Basins (MRBs, Crawford and others, 2006). MRB1, covering the New England and Mid-Atlantic River basins, contains NHDPlus Production Units 1 and 2. MRB2, covering the South Atlantic-Gulf and Tennessee River basins, contains NHDPlus Production Units 3 and 6. MRB3, covering the Great Lakes, Ohio, Upper Mississippi, and Souris-Red-Rainy River basins, contains NHDPlus Production Units 4, 5, 7 and 9. MRB4, covering the Missouri River basins, contains NHDPlus Production Units 10-lower and 10-upper. MRB5, covering the Lower Mississippi, Arkansas-White-Red, and Texas-Gulf River basins, contains NHDPlus Production Units 8, 11 and 12. MRB6, covering the Rio Grande, Colorado and Great Basin River basins, contains NHDPlus Production Units 13, 14, 15 and 16. MRB7, covering the Pacific Northwest River basins, contains NHDPlus Production Unit 17. MRB8, covering California River basins, contains NHDPlus Production Unit 18.

Data Series↗

USGS2023

Updates to CE-QUAL-W2 models for select U.S. Army Corps of Engineers reservoirs in the Willamette Valley Project and an inter-reservoir reach of the Middle Fork Willamette River, northwestern Oregon

Mechanistic models capable of simulating hydrodynamics and water temperature in rivers and reservoirs are valuable tools for investigating thermal conditions and their relation to dam operations and streamflow in river basins where upstream water storage and management decisions have an important influence on river reaches with threatened fish populations. In particular, models allow managers to investigate how new, untried operations or hypothetical structures might influence streamflow and temperature conditions downstream. CE-QUAL-W2 is a two-dimensional (laterally averaged) hydrodynamic water-quality model that has previously been used to investigate the downstream effects of dam operations and other anthropogenic influences on stream temperature in the Willamette River Basin in northwestern Oregon, a region with two populations of fish species designated as threatened under the Endangered Species Act. By linking CE-QUAL-W2 river models to models of upstream, large Willamette Valley Project dams and reservoirs, these models can be used to investigate how dam operations at individual dams can influence streamflow and thermal conditions in downstream river reaches as an integrated system. Integrated model simulations that include the large dams and reservoirs linked to downstream river reaches can help managers develop a better understanding of tradeoffs associated with potential retrofits or operational changes across the multipurpose dams in the Willamette Valley Project, the effect of dam management on downstream tributaries and the Willamette River, and the resulting potential effect on threatened fish populations and habitat conditions. River models capable of simulating river corridors downstream from U.S. Army Corps of Engineers dams were previously updated and integrated to simulate conditions that occurred from March through October of 2011 (a cool and wet year), 2015 (a hot and dry year), and 2016 (a moderately hot and dry year) using CE-QUAL-W2 version 4.2. These river models encompass the following: Coast Fork Willamette and Middle Fork Willamette Rivers, the Row River, and Fall Creek downstream from Cottage Grove, Dexter, Dorena, and Fall Creek Dams, respectively; South Fork McKenzie River downstream from Cougar Dam; McKenzie River downstream from its confluence with the South Fork McKenzie River; South Santiam River downstream from Foster Dam; North Santiam River downstream from Big Cliff Dam; and Willamette River from its start at the confluence of the Middle Fork Willamette and Coast Fork Willamette Rivers to Willamette Falls (river mile 26.0; near West Linn, Oregon). This report documents model modifications, boundary condition data sources or estimation methods, and goodness-of-fit statistics for six CE-QUAL-W2 reservoir models and one river model upstream from the existing river models. These models simulate (1) Hills Creek Lake; (2) Lookout Point Lake and Dexter Reservoir on the Middle Fork Willamette River; (3) the Middle Fork Willamette River reach between Hills Creek Dam upstream and Lookout Point Lake downstream; (4) Cougar Reservoir on the South Fork McKenzie River; (5) Green Peter Lake on the Middle Santiam River and Foster Lake on the South Santiam River; and (6) Detroit Lake and (7) Big Cliff Reservoir on the North Santiam River. These CE-QUAL-W2 models were built by a variety of researchers to simulate a range of conditions in past years; this report documents their upgrade to U.S. Geological Survey (USGS) edition 7 of version 4.2 of CE-QUAL-W2 and updates each model to simulate conditions from January through December of 2011, 2015, and 2016. Also included in this report is an explanation of modifications to the CE-QUAL-W2 source code that constitute USGS edition 7 of CE-QUAL-W2 version 4.2. Each of the models described in this report can be run in isolation or linked to downstream models as a “system model” to simulate conditions in tributaries and (or) in the Willamette Valley Project as a whole. As part of the model updates described in this report, some model parameters were adjusted to improve stability or decrease model error, and boundary conditions including meteorological, hydrologic, and temperature inputs were developed and updated for model years 2011, 2015, and 2016, as necessary. In some cases, the data sources used to drive previous model versions were no longer available, which required the development and checking of new data sources or estimation techniques. Goodness-of-fit statistics for outflow from the dams and in simulated river reaches generally show a good model fit, with the models simulating subdaily water temperatures at most comparable locations with a mean absolute error of generally less than 1 degree Celsius (°C) and a reasonably low bias. Model simulation of the thermal vertical profiles in each reservoir also produced an overall mean absolute error of generally less than 1 °C for all 3 years, with the exception of the Hills Creek Lake Model and the Cougar Reservoir Model in years when the reservoirs did not fill (2015 and 2016). Both of these models have known calibration issues and tend to be sensitive to the choice of certain structural parameters in the model. Overall, the calibration process was focused on obtaining model settings that led to realistic water temperature predictions in all 3 years (2011, 2015, and 2016) without over-calibrating specifically to any single year. A complete investigation of model error for these reservoir submodels was beyond the scope of this investigation but could be undertaken in the future if better model performance for these two reservoirs is desired.

Oregon↗

USGS1991

Depth to water in the western Snake River Plain and surrounding tributary valleys, southwestern Idaho and eastern Oregon, calculated using water levels from 1980 to 1988

The vulnerability of ground water to contamination in Idaho is being assessed by the ISHW/DEQ (Idaho Department of Health and Welfare, Division of Environmental Quality), using a modified version of the Environmental Protection Agency DRASTIC methods (Allers and others, 1985). The project was designed as a technique to: (1) Assign priorities for development of ground-water management and monitoring programs; (2) build support for, and public awareness of, vulnerability of ground water to contamination; (3) assist in the development of regulatory programs; and (4) provide access to technical data through the use of a GIS (geographic information system) (C. Grantham, Idaho Department of Health and Welfare, written commun., 1989). Digital representation of first-encountered water below land surface is an important element in evaluating vulnerability of ground water to contamination. Depth-to-water values were developed using existing data and computer software to construct a GIS data set to be combined with a soils data set developed by the SCS (Soul Conservation Service) and the IDHW/WQB (Idaho Department of Health and Welfare/Water Quality Bureau), and a recharge data set developed by the IDWR/RSF (idaho Department of Water Resources/Remote Sensing Facility). The USGS (U.S. Geological Survey) has developed digital depth-to-water values for eleven 1:100,00-scale quadrangles on the eastern Snake River Plain and surrounding tributary valleys.

Idaho↗