Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Interpretation”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50Linked to original sources
USGS2008

Patch-reef morphology as a proxy for Holocene sea-level variability, Northern Florida Keys, USA

A portion of the northern Florida Keys reef tract was mapped with the NASA Experimental Advanced Airborne Research Lidar (EAARL) and the morphology of patch reefs was related to variations in Holocene sea level. Following creation of a lidar digital elevation model (DEM), geospatial analyses delineated morphologic attributes of 1,034 patch reefs (reef depth, basal area, height, volume, and topographic complexity). Morphometric analysis revealed two morphologically different populations of patch reefs associated with two distinct depth intervals above and below a water depth of 7.7 m. Compared to shallow reefs, the deep reefs were smaller in area and volume and showed no trend in topographic complexity relative to water depth. Shallow reefs were more variable in area and volume and became flatter and less topographically complex with decreasing water depth. The knoll-like morphology of deep reefs was interpreted as consistent with steady and relatively rapidly rising early Holocene sea level that restricted the lateral growth of reefs. The morphology of shallow 'pancake-shaped' reefs at the highest platform elevations was interpreted as consistent with fluctuating sea level during the late Holocene. Although the ultimate cause for the morphometric depth trends remains open to interpretation, these interpretations are compatible with a recent eustatic sea-level curve that hindcasts fluctuating late Holocene sea level. Thus it is suggested that the morphologic differences represent two stages of reef accretion that occurred during different sea-level conditions. ?? 2008 Springer-Verlag.

Coral Reefs↗
USGS2014

Geoelectrical structure of the central zone of Piton de la Fournaise volcano (Reunion)

A study of the geoelectrical structure of the central part of Piton de la Fournaise volcano (Reunion, Indian Ocean) was made using direct current electrical (DC) and transient electromagnetic soundings (TEM). Piton de la Fournaise is a highly active oceanic basaltic shield and has been active for more than half a million years. Joint interpretation of the DC and TEM data allows us to obtain reliable 1D models of the resistivity distribution. The depth of investigation is of the order of 1.5 km but varies with the resistivity pattern encountered at each sounding. Two-dimensional resistivity cross sections were constructed by interpolation between the soundings of the 1D interpreted models. Conductors with resistivities less than 100 ohm-m are present at depth beneath all of the soundings and are located high in the volcanic edifice at elevations between 2000 and 1200 m. The deepest conductor has a resistivity less than 20 ohm-m for soundings located inside the Enclos and less than 60-100 ohm-m for soundings outside the Enclos. From the resistivity distributions, two zones are distinguished: (a) the central zone of the Enclos; and (b) the outer zone beyond the Enclos. Beneath the highly active summit area, the conductor rises to within a few hundred meters of the surface. This bulge coincides with a 2000-mV self-potential anomaly. Low-resistivity zones are inferred to show the presence of a hydrothermal system where alteration by steam and hot water has lowered the resistivity of the rocks. Farther from the summit, but inside the Enclos the depth to the conductive layers increases to approximately 1 km and is inferred to be a deepening of the hydrothermally altered zone. Outside of the Enclos, the nature of the deep, conductive layers is not established. The observed resistivities suggest the presence of hydrated minerals, which could be found in landslide breccias, in hydrothermally altered zones, or in thick pyroclastic layers. Such formations often create perched water tables. The known occurrence of large eastward-moving landslides in the evolution of Piton de la Fournaise strongly suggests that large volumes of breccias should exist in the interior of the volcano; however, extensive breccia deposits are not observed at the bottom of the deep valleys that incise the volcano to elevations lower than those determined for the top of the conductors. The presence of the center of Piton de la Fournaise beneath the Plaine des Sables area during earlier volcanic stages (ca. 0.5 to 0.150 Ma) may have resulted in broad hydrothermal alteration of this zone. However, this interpretation cannot account for the low resistivities in peripheral zones. It is not presently possible to discriminate between these general interpretations. In addition, the nature of the deep conductors may be different in each zone. Whatever the geologic nature of these conductive layers, their presence indicates a major change of lithology at depth, unexpected for a shield volcano such as Piton de la Fournaise.

Bulletin of Volcanology↗
USGS2005

Geochemistry and the understanding of ground-water systems

Geochemistry has contributed significantly to the understanding of ground-water systems over the last 50 years. Historic advances include development of the hydrochemical facies concept, application of equilibrium theory, investigation of redox processes, and radiocarbon dating. Other hydrochemical concepts, tools, and techniques have helped elucidate mechanisms of flow and transport in ground-water systems, and have helped unlock an archive of paleoenvironmental information. Hydrochemical and isotopic information can be used to interpret the origin and mode of ground-water recharge, refine estimates of time scales of recharge and ground-water flow, decipher reactive processes, provide paleohydrological information, and calibrate ground-water flow models. Progress needs to be made in obtaining representative samples. Improvements are needed in the interpretation of the information obtained, and in the construction and interpretation of numerical models utilizing hydrochemical data. The best approach will ensure an optimized iterative process between field data collection and analysis, interpretation, and the application of forward, inverse, and statistical modeling tools. Advances are anticipated from microbiological investigations, the characterization of natural organics, isotopic fingerprinting, applications of dissolved gas measurements, and the fields of reaction kinetics and coupled processes. A thermodynamic perspective is offered that could facilitate the comparison and understanding of the multiple physical, chemical, and biological processes affecting ground-water systems.

Hydrogeology Journal↗
USGS1995

Further evidence for a low U/Pb source in the moon: U-Th-Pb, Sm-Nd, and Ar-Ar, isotopic systematics of lunar meteorite Yamato-793169

The coarse-grained lunar meteorites, Yamato-793169 and Asuka-881757, represent a new type of low-Ti mare basalt. This paper reports the results of a U-Th-Pb, Sm-Nd, and Ar-Ar isotopic study of Yamato-793169 performed as part of a consortium studies of lunar basaltic meteorites. The isotopic study was carried out on a small sample (100 mg) so that only three density fractions could be separated. These fractions were leached with dilute acid in order to eliminate terrestrial Pb contamination. However, the leaching procedure did not completely remove this contamination in some fractions and also apparently caused a fractionation of elements (U, Th, Pb) due to preferential leaching effects, producing a secondary disturbance of the systematics. Furthermore, the Ar-Ar analyses indicate that the isotopic systematics in this meteorite might have been disturbed sometime later than 750 Ma. For these reasons, the ages obtained using different isotopic systems disagree with each other and a precise formation age could not be obtained for this meteorite. However, using what results there are, two reasonable interpretations can be made: (1) the Sm-Nd system yielded an age of 3.4 Ga that could be interpreted as the formation age, assuming that this system is possibly the least disturbed during the metamorphic event(s) that this meteorite experienced at least once, and that all other isotopic systems and their corresponding ages were disturbed, and (2) the U-Pb system yielded a nearly concordant age of 3.8 Ga that could be interpreted as the formation age and the Sm-Nd isotopic systematics were somehow disturbed. We prefer the second interpretation for the reasons discussed below. On a concordia diagram, the CDT (Cañon Diablo troilite)-corrected U-Pb isotopic data yield a discordia line similar to the lunar catastrophic array, indicating that the source of the meteorite formed during early lunar differentiation (∼4.4 Ga) and that the basalt was generated near 3.9 Ga. Total Ar-Ar age on plagioclase is 3.26 Ga, which seems to be too old if the formation age is 3.4 Ga, because low temperature fractions lost large amounts of radiogenic 40 Ar during the late thermal event. If we assume a formation age of 3.8 Ga, the estimated source 238 U/ 204 Pb (μ) is 21.6 ± 3.5 and ϵ Nd is 3.9 ± 0.3. These results indicate that the source of Yamato-793169 is more depleted than Apollo 12 and 15 LT basalts, but less depleted than Asuka-881757. Therefore, Yamato-793169 may represent a new type of LT- or VLT-like mare basalt that is different from Asuka-881757. The wide variety of lead and neodymium isotopic characteristics among LT and VLT mare basalts indicate that the lunar mantle was very heterogeneous with respect to trace element abundances.

Geochimica et Cosmochimica Acta↗
USGS1989

Characterization of coal-derived hydrocarbons and source-rock potential of coal beds, San Juan Basin, New Mexico and Colorado, U.S.A.

Coal beds are considered to be a major source of nonassociated gas in the Rocky Mountain basins of the United States. In the San Juan basin of northwestern New Mexico and southwestern Colorado, significant quantities of natural gas are being produced from coal beds of the Upper Cretaceous Fruitland Formation and from adjacent sandstone reservoirs. Analysis of gas samples from the various gas-producing intervals provided a means of determining their origin and of evaluating coal beds as source rocks. The rank of coal beds in the Fruitland Formation in the central part of the San Juan basin, where major gas production occurs, increases to the northeast and ranges from high-volatile B bituminous coal to medium-volatile bituminous coal ( R m values range from 0.70 to 1.45%). On the basis of chemical, isotopic and coal-rank data, the gases are interpreted to be thermogenic. Gases from the coal beds show little isotopic variation ( δ 13 C 1 values range −43.6 to −40.5 ppt), are chemically dry (C 1 /C 1–5 values are > 0.99), and contain significant amounts of CO 2 (as much as 6%). These gases are interpreted to have resulted from devolatilization of the humic-type bituminous coal that is composed mainly of vitrinite. The primary products of this process are CH 4 , CO 2 and H 2 O. The coal-generated, methane-rich gas is usually contained in the coal beds of the Fruitland Formation, and has not been expelled and has not migrated into the adjacent sandstone reservoirs. In addition, the coal-bed reservoirs produce a distinctive bicarbonate-type connate water and have higher reservoir pressures than adjacent sandstones. The combination of these factors indicates that coal beds are a closed reservoir system created by the gases, waters, and associated pressures in the micropore coal structure. In contrast, gases produced from overlying sandstones in the Fruitland Formation and underlying Pictured Cliffs Sandstone have a wider range of isotopic values ( δ 13 C 1 values range from −43.5 to −38.5 ppt), are chemically wetter (C 1 /C 1–5 values range from 0.85 to 0.95), and contain less CO 2 (< 2%). These gases are interpreted to have been derived from type III kerogen dispersed in marine shales of the underlying Lewis Shale and nonmarine shales of the Fruitland Formation. In the underlying Upper Cretaceous Dakota Sandstone and Tocito Sandstone Lentil of the Mancos Shale, another gas type is produced. This gas is associated with oil at intermediate stages of thermal maturity and is isotopically lighter and chemically wetter at the intermediate stage of thermal maturity as compared with gases derived from dispersed type III kerogen and coal; this gas type is interpreted to have been generated from type II kerogen. Organic matter contained in coal beds and carbonaceous shales of the Fruitland Formation has hydrogen indexes from Rock-Eval pyrolysis between 100 and 350, and atomic H:C ratios between 0.8 and 1.2. Oxygen indexes and atomic O:C values are less than 24 and 0.3, respectively. Extractable hydrocarbon yields are as high as 7,000 ppm. These values indicate that the coal beds and carbonaceous shales have good potential for the generation of liquid hydrocarbons. Voids in the coal filled with a fluorescent material that is probably bitumen is evidence that liquid hydrocarbon generation has taken place. Preliminary oil-source rock correlations based on gas chromatography and stable carbon isotope ratios of C 15+ hydrocarbons indicate that the coals and (or) carbonaceous shales in the Fruitland Formation may be the source of minor amounts of condensate produced from the coal beds at relatively low levelsof thermal maturity ( R m =0.7).

International Journal of Coal Geology↗
USGS1990

Relationships among macerals, minerals, miospores and paleoecology in a column of Redstone coal (Upper Pennsylvanian) from north-central West Virginia (U.S.A.)

Two distinct paleoenvironments are represented in vertical succession in a column of Redstone coal in north-central West Virginia as indicated by a study of 37 consecutive 3-cm (0.1 ft) increments analyzed for ash yield, petrographic composition, low-temperature ash mineralogy and palynomorph abundances. Abundance profiles were constructed for ash, 12 petrographic components, 3 minerals and 5 miospore assemblages. The profiles and calculated correlation coefficients show close relationships between several constituents. Components that increased in abundance upward in the coal bed were a collinite type > 50 microns in thickness, cutinite, and miospores affiliated with calamites, herbaceous lycopods, cordaites and herbaceous ferns. Components that decreased in abundance upward were a collinite type < 50 microns in thickness, inertodetrinite, tree fern miospores, quartz, illite and ash yield. Components were correlated with ash yield to infer the swamp geochemical conditions that contributed to the low-ash (7%) upper one-third of the coal bed and the higher-ash (16%) lower two-thirds of the coal bed. Components that correlate positively with increased ash were the collinite type < 50 μ m thickness, inertodetrinite, tree fern miospores, illite and quartz. Components that correlate negatively with increased ash were the collinite type > 50 μ m in thickness, cutinite, calamite and cordaite miospores and kaolinite. Significant correlations occurred between ash yield and the collinite types > 50 and < 50 μ m in thickness but no significant correlation was found between ash yield and total vitrinite-group content. This is interpreted to show that division of vitrinite macerals by size is important in petrographic paleoenvironmental studies. Paleoecologic interpretations based upon these correlations suggest that two distinct, planar, probably topogenous paleoecologic environments are represented in this column of the Redstone coal. The lower two-thirds of the coal bed was interpreted to have accumulated in a planar swamp in which significant introduction of detrital or dissolved mineral matter, and significant anaerobic and moderate oxidative degradation of the peat occurred. The flora of this paleoenvironment was dominated by tree ferns. The paleoenvironment during accumulation of the upper one-third of the coal bed was also interpreted to have been a planar swamp, but one in which moderate to low introduction of detrital or dissolved mineral matter, and minor anaerobic and oxidative degradation of the peat occurred. The dominant flora of this paleoenvironment consisted mainly of calamites with fewer cordaites and herbaceous ferns. This study shows that valuable paleoecologic information may be obtained by sampling closely spaced vertical increments. No mixing of detrital sediments with the peat was observed in coal layers immediately adjacent to the parting or the overlying sandstone unit.

International Journal of Coal Geology↗
USGS1991

Facies development in the Lower Freeport coal bed, west-central Pennsylvania, U.S.A.

The Lower Freeport coal bed in west-central Pennsylvania is interpreted to have formed within a lacustrine-mire environment. Conditions of peat formation, caused by the changing chemical and physical environments, produced five coal facies and two mineral-rich parting facies within the coal bed. The coal bed facies are compositionally unique, having developed under varying conditions, and are manifested by megascopic, petrographic, palynologic and quality characteristics. The initial environment of the Lower Freeport peat resulted in a coal facies that is relatively high in ash yield and contains large amounts of lycopod miospores and moderate abundances of cryptotelinite, crypto-gelocollinite, inertinite and tree fern miospores. This initial Lower Freeport peat is interpreted to have been a topogenous body that was low lying, relatively nutrient rich (mesotrophic to eutrophic), and susceptible to ground water and to sediment influx from surface water. The next facies to form was a ubiquitous, clay-rich durain parting which is attributed to a general rise in the water table accompanied by widespread flooding. Following formation of the parting, peat accumulation resumed within an environment that inhibited clastic input. Development of doming in this facies restricted deposition of the upper shale parting to the margins of the mire and allowed low-ash peat to form in the interior of the mire. Because this environment was conducive to preservation of cellular tissue, this coal facies also contains large amounts of crypto-telinite. This facies development is interpreted to have been a transitional phase from topogenous, planar peat formation to slightly domed, oligotrophic (nutrient-poor) peat formation. As domed peat formation continued, fluctuations in the water table enabled oxidation of the peat surface and produced high inertinite concentrations toward the top of the coal bed. Tree ferns became an increasingly important peat contributor in the e upper facies, based on the palynoflora. This floral change is interpreted to have resulted from the peat surface becoming less wet or better drained, a condition that inhibited proliferation of lycopod trees. Accumulation of the peat continued until rising water levels formed a freshwater lake within which clays and silts were deposited. The development of the Lower Freeport peat from a planar mire through transitional phases toward domed peat formation may be an example of the type of peat formation of other upper Middle and Upper Pennsylvanian coal beds.

International Journal of Coal Geology↗
USGS2017

Microbial methane from in situ biodegradation of coal and shale: A review and reevaluation of hydrogen and carbon isotope signatures

Stable carbon and hydrogen isotope signatures of methane, water, and inorganic carbon are widely utilized in natural gas systems for distinguishing microbial and thermogenic methane and for delineating methanogenic pathways (acetoclastic, hydrogenotrophic, and/or methylotrophic methanogenesis). Recent studies of coal and shale gas systems have characterized in situ microbial communities and provided stable isotope data (δD-CH 4 , δD-H 2 O, δ 13 C-CH 4 , and δ 13 C-CO 2 ) from a wider range of environments than available previously. Here we review the principal biogenic methane-yielding pathways in coal beds and shales and the isotope effects imparted on methane, document the uncertainties and inconsistencies in established isotopic fingerprinting techniques, and identify the knowledge gaps in understanding the subsurface processes that govern H and C isotope signatures of biogenic methane. We also compare established isotopic interpretations with recent microbial community characterization techniques, which reveal additional inconsistencies in the interpretation of microbial metabolic pathways in coal beds and shales. Collectively, the re-assessed data show that widely-utilized isotopic fingerprinting techniques neglect important complications in coal beds and shales. Isotopic fingerprinting techniques that combine δ 13 C-CH 4 with δD-CH 4 and/or δ 13 C-CO 2 have significant limitations: (1) The consistent ~ 160‰ offset between δD-H 2 O and δD-CH 4 could imply that hydrogenotrophic methanogenesis is the dominant metabolic pathway in microbial gas systems. However, hydrogen isotopes can equilibrate between methane precursors and coexisting water, yielding a similar apparent H isotope signal as hydrogenotrophic methanogenesis, regardless of the actual methane formation pathway. (2) Non-methanogenic processes such as sulfate reduction, Fe oxide reduction, inputs of thermogenic methane, anaerobic methane oxidation, and/or formation water interaction can cause the apparent carbon isotope fractionation between δ 13 C-CH 4 and δ 13 C-CO 2 (α 13 C CO2-CH4 ) to differ from the true methanogenic fractionation, complicating interpretation of methanogenic pathways. (3) Where little-fractionating non-methanogenic bacterial processes compete with highly-fractionating methanogenesis, the mass balance between CH 4 and CO 2 is affected. This has implications for δ 13 C values and provides an alternative interpretation for net C isotope signatures than solely the pathways used by active methanogens. (4) While most of the reviewed values of δD-H 2 O - δD-CH 4 and α 13 C CO2-CH4 are apparently consistent with hydrogenotrophic methanogenesis as the dominant pathway in coal beds and shales, recent microbial community characterization techniques suggest a possible role for acetoclastic or methylotrophic methanogenesis in some basins.

Chemical Geology↗
USGS2006

Facies architecture and paleohydrology of a synrift succession in the Early Cretaceous Choyr Basin, southeastern Mongolia

The Choyr Basin is one of several Early Cretaceous rift basins in southwestern Mongolia that developed in specific regions between north-south trending fold-and-thrust belts. The eastern margin of the basin is defined by high-angle normal and/or strike-slip faults that trend north-to-south and northeast-to-southwest and by the overall geometry of the basin, which is interpreted to be a half graben. The sedimentary succession of the Choyr Basin documents one of the various types of tectono-sedimentary processes that were active in the rift basins of East Asia during Early Cretaceous time. The sedimentary infill of the Choyr Basin is newly defined as the Khalzan Uul and Khuren Dukh formations based on detailed mapping of lateral and vertical variations in component lithofacies assemblages. These two formations are heterotopic deposits and constitute a third-order fluvio-lacustrine sequence that can be divided into transgressive and highstand systems tracts. The lower part of the transgressive systems tract (TST) is characterized by sandy alluvial-fan and braided-river systems on the hanging wall along the western basin margin, and by a gravelly alluvial-fan system on the footwall along the eastern basin margin. The alluvial-fan and braided-river deposits along the western basin margin are fossiliferous and are interpreted to have developed in association with a perennial fluvial system. In contrast, alluvial-fan deposits along the eastern basin margin do not contain any distinct faunas or floras and are interpreted to have been influenced by a high-discharge ephemeral fluvial system associated with fluctuations in wetting and drying paleohydrologic processes. The lower part of the TST deposit fines upward to siltstone-dominated flood-plain and ephemeral-lake deposits that constitute the upper part of the TST and the lower part of the highstand systems tract (HST). These mudstone deposits eventually reduced the topographic irregularities typical of the early stage of synrift basin development, with an associated decrease in topographic-slope gradients. Finally, a high-sinuosity meandering river system drained to the south during the late highstand stage in response to the northward migration of the depocenter. The upper HST deposits are also fossiliferous and are interpreted to have been influenced by a perennial fluvial system, although the average annual discharge of this system was probably less than 5 percent of that involved in the formation of the lower TST deposits along the western basin margin. ?? 2006 Elsevier Ltd. All rights reserved.

Cretaceous Research↗
USGS2011

Real-time monitoring of CO2 storage sites: Application to Illinois Basin-Decatur Project

Optimization of carbon dioxide (CO 2 ) storage operations for efficiency and safety requires use of monitoring techniques and implementation of control protocols. The monitoring techniques consist of permanent sensors and tools deployed for measurement campaigns. Large amounts of data are thus generated. These data must be managed and integrated for interpretation at different time scales. A fast interpretation loop involves combining continuous measurements from permanent sensors as they are collected to enable a rapid response to detected events; a slower loop requires combining large datasets gathered over longer operational periods from all techniques. The purpose of this paper is twofold. First, it presents an analysis of the monitoring objectives to be performed in the slow and fast interpretation loops. Second, it describes the implementation of the fast interpretation loop with a real-time monitoring system at the Illinois Basin–Decatur Project (IBDP) in Illinois, USA.

Energy Procedia↗
USGS2020

Thicknesses of lava flows in satellite images: Comparison of layered mare units with terrestrial analogs

Recent advances in satellite imaging technology have greatly improved our observations of planetary surfaces. The Lunar Reconnaissance Orbiter (LRO) Narrow Angle Camera (NAC) records images with resolutions on average of 0.5 m per pixel, resolving meter scale features on the surface of the Moon. NAC images have revealed layered deposits, interpreted to be sequences of mare basalt flows, in the walls of impact craters on the lunar nearside. However, caution must be exercised in the interpretation of surface processes from morphologies of features that are close to the limits of detectability. Our goal is to quantify where that limit is for lava flow stratigraphy. Here we report on a terrestrial analog study conduced to better constrain limitations in the measurements of thicknesses of lava flows observed in high-resolution satellite-collected images. Using WorldView-2 satellite images, we mapped layered basalt flows at three sites in the Wai'anae and Ko'olau Ranges of O'ahu, Hawai'i. Fieldwork conducted at these sites allowed for assessment of the accuracy of image interpretations. We found that flow thickness estimates made using WorldView-2 images overestimated thicknesses of individual lava flows measured in the field at all eight locations visited by a factor of 1.2 to 3.5. A primary reason for this overestimation by remote sensing analysis is that many outcropping “layers” within a transect contain more than one individual flow, a distinction that is not visible in satellite images. However, the mean thickness of the layers seen in the orbital data was 0.8 to 1.7 times the outcrop thickness measured in the field, suggesting that the remote measurements should be considered estimates of the outcrop thickness rather than the thickness of individual lava flows. Measurements of layered lunar mare lava units in LRO NAC images provided layer thicknesses that ranged from <1–6 times greater than those derived from images of the O'ahu study sites. It is reasonable to expect that many lunar outcrops similarly contain more than one individual flow and display similar outcropping patterns. This suggests that many current estimates of layer thicknesses derived by comparable methods actually correspond to outcrop thicknesses. Current interpretations of lava flow thicknesses derived from planetary images should be considered maximums for individual flow thicknesses with uncertainties that may be as high as a factor of 3 or more.

Hawaii↗
USGS2023

Thirty years of regional groundwater-quality trend studies in the United States: Major findings and lessons learned

Changes in groundwater quality have been evaluated for more than 2,200 wells in 25 Principal Aquifers in the United States based on repeated decadal sampling (once every 10 years) from 1988 to 2021. The purpose of this study is to identify contaminants with changing concentrations, the locations and magnitude of those changes, the factors driving those changes, the obstacles to interpreting the changes, and approaches to ameliorate those obstacles. Sampling was conducted in 89 networks of 20–30 wells each that represent various geographic regions, aquifer types and land use types. Each network, and the wells that comprise them, are sampled on a rotating basis once every 10 years. Of the 28 constituents evaluated for trends, concentrations of Na, Cl, dissolved solids, SO 4 , and NO 3 exhibited statistically significant increases at the network level more frequently than other constituents. Factors affecting trends in Cl and NO 3 are emphasized in this study. Regional patterns show large increases of Cl in urban areas in the Northeast and Midcontinent, where road-deicing salt application rates are 10 to 100 times greater than in other regions of the country, and in semiarid and arid regions of the western United States, where evaporation concentrates solutes in recharge. The largest increases in NO 3 were in agricultural areas of the semiarid west, arid west and Pacific regions which are characterized by oxic groundwater, long-term increases in nitrogen fertilizer usage, and high rates of irrigation. However, finding a direct relation between increasing contaminant sources and corresponding groundwater quality response, particularly when sampling once every 10 years, can be complicated by factors such as uncertainty in the timing, mass, and location of contaminant sources, groundwater residence time (recharge date), geochemical conditions in the aquifer that affect contaminant transport, and variability in water quality due to climatic factors such as seasonality and hydrologic conditions. Understanding groundwater residence time allows the changes in groundwater quality to be evaluated in the context of recharge date rather than the sample date. Likewise, information on geochemical characteristics of the aquifer can be helpful for understanding relations between contaminant source inputs and groundwater concentrations. For example, oxic geochemical conditions in the aquifer may allow for conservative transport and accumulation of NO 3 in groundwater, whereas reducing environments could favor NO 3 degradation. Differences in hydrologic conditions (wetter or drier than average) on the date of sampling could impact the statistical results of sampling at decadal intervals and obscure long-term patterns. Samples collected under substantially different hydrologic conditions can be identified, and high-frequency sampling can improve interpretation of measured results in these cases. Although decadal sampling and associated water-quality interpretations have limitations, repeated, scheduled sampling of thousands of wells over multiple decades has great value for identifying and understanding long-term, regional groundwater-quality trends. Despite these limitations, the concepts presented herein provide options that could be used to interpret trends or changes when sampling over longer timespans, which is less common than trend networks with higher frequency sampling intervals.

Conterminous United States↗
USGS2012

Keanakākoʻi Tephra produced by 300 years of explosive eruptions following collapse of Kīlauea's caldera in about 1500 CE

The Keanakākoʻi Tephra at Kīlauea Volcano has previously been interpreted by some as the product of a caldera-forming eruption in 1790 CE. Our study, however, finds stratigraphic and 14 C evidence that the tephra instead results from numerous eruptions throughout a 300-year period between about 1500 and 1800. The stratigraphic evidence includes: (1) as many as six pure lithic ash beds interleaved in sand dunes made of earlier Keanakākoʻi vitric ash, (2) three lava flows from Kīlauea and Mauna Loa interbedded with the tephra, (3) buried syneruptive cultural structures, (4) numerous intraformational water-cut gullies, and (5) abundant organic layers rich in charcoal within the tephra section. Interpretation of 97 new accelerator mass spectrometry (AMS) 14 C ages and 4 previous conventional ages suggests that explosive eruptions began in 1470–1510 CE, and that explosive activity continued episodically until the early 1800s, probably with two periods of quiescence lasting several decades. Kīlauea's caldera, rather than forming in 1790, predates the first eruption of the Keanakākoʻi and collapsed in 1470–1510, immediately following, and perhaps causing, the end of the 60-year-long, 4–6 km 3 ʻAilāʻau eruption from the east side of Kīlauea's summit area. The caldera was several hundred meters deep when the Keanakākoʻi began erupting, consistent with oral tradition, and probably had a volume of 4–6 km3. The caldera formed by collapse, but no eruption of lava coincided with its formation. A large volume of magma may have quickly drained from the summit reservoir and intruded into the east rift zone, perhaps in response to a major south-flank slip event, leading to summit collapse. Alternatively, magma may have slowly drained from the reservoir during the prolonged ʻAilāʻau eruption, causing episodic collapses before the final, largest downdrop took place. Two prolonged periods of episodic explosive eruptions are known at Kīlauea, the Keanakākoʻi and the Uwēkahuna Tephra (Fiske et al., 2009), and both occurred when a deep caldera existed, probably with a floor at or below the water table, and external water could readily interact with the magmatic system. The next period of intense explosive activity will probably have to await the drastic deepening of the present caldera (or Halemaʻumaʻu Crater) or the formation of a new caldera.

Hawai'i↗
USGS2016

Continental Shelf Morphology and Stratigraphy Offshore San Onofre, CA: The Interplay Between Rates of Eustatic Change and Sediment Supply

New high-resolution CHIRP seismic data acquired offshore San Onofre, southern California reveal that shelf sediment distribution and thickness are primarily controlled by eustatic sea level rise and sediment supply. Throughout the majority of the study region, a prominent abrasion platform and associated shoreline cutoff are observed in the subsurface from ~ 72 to 53 m below present sea level. These erosional features appear to have formed between Melt Water Pulse 1A and Melt Water Pulse 1B, when the rate of sea-level rise was lower. There are three distinct sedimentary units mapped above a regional angular unconformity interpreted to be the Holocene transgressive surface in the seismic data. Unit I, the deepest unit, is interpreted as a lag deposit that infills a topographic low associated with an abrasion platform. Unit I thins seaward by downlap and pinches out landward against the shoreline cutoff. Unit II is a mid-shelf lag deposit formed from shallower eroded material and thins seaward by downlap and landward by onlap. The youngest, Unit III, is interpreted to represent modern sediment deposition. Faults in the study area do not appear to offset the transgressive surface. The Newport Inglewood/Rose Canyon fault system is active in other regions to the south (e.g., La Jolla) where it offsets the transgressive surface and creates seafloor relief. Several shoals observed along the transgressive surface could record minor deformation due to fault activity in the study area. Nevertheless, our preferred interpretation is that the shoals are regions more resistant to erosion during marine transgression. The Cristianitos fault zone also causes a shoaling of the transgressive surface. This may be from resistant antecedent topography due to an early phase of compression on the fault. The Cristianitos fault zone was previously defined as a down-to-the-north normal fault, but the folding and faulting architecture imaged in the CHIRP data are more consistent with a strike-slip fault with a down-to-the-northwest dip-slip component. A third area of shoaling is observed off of San Mateo and San Onofre creeks. This shoaling has a constructional component and could be a relict delta or beach structure. (C) 2015 Elsevier B.V. All rights reserved.

California↗
USGS2011

Mount Elbert Gas Hydrate Stratigraphic Test Well, Alaska North Slope: Coring operations, core sedimentology, and lithostratigraphy

In February 2007, BP Exploration (Alaska), the U.S. Department of Energy, and the U.S. Geological Survey completed the BPXA-DOE-USGS Mount Elbert Gas Hydrate Stratigraphic Test Well (Mount Elbert well) in the Milne Point Unit on the Alaska North Slope. The program achieved its primary goals of validating the pre-drill estimates of gas hydrate occurrence and thickness based on 3-D seismic interpretations and wireline log correlations and collecting a comprehensive suite of logging, coring, and pressure testing data. The upper section of the Mount Elbert well was drilled through the base of ice-bearing permafrost to a casing point of 594 m (1950 ft), approximately 15 m (50 ft) above the top of the targeted reservoir interval. The lower portion of the well was continuously cored from 606 m (1987 ft) to 760 m (2494 ft) and drilled to a total depth of 914 m. Ice-bearing permafrost extends to a depth of roughly 536 m and the base of gas hydrate stability is interpreted to extend to a depth of 870 m. Coring through the targeted gas hydrate bearing reservoirs was completed using a wireline-retrievable system. The coring program achieved 85% recovery of 7.6 cm (3 in) diameter core through 154 m (504 ft) of the hole. An onsite team processed the cores, collecting and preserving approximately 250 sub-samples for analyses of pore water geochemistry, microbiology, gas chemistry, petrophysical analysis, and thermal and physical properties. Eleven samples were immediately transferred to either methane-charged pressure vessels or liquid nitrogen for future study of the preserved gas hydrate. Additional offsite sampling, analyses, and detailed description of the cores were also conducted. Based on this work, one lithostratigraphic unit with eight subunits was identified across the cored interval. Subunits II and Va comprise the majority of the reservoir facies and are dominantly very fine to fine, moderately sorted, quartz, feldspar, and lithic fragment-bearing to -rich sands. Lithostratigraphic and palynologic data indicate that this section is most likely early Eocene to late Paleocene in age. The examined units contain evidence for both marine and non-marine lithofacies, and indications that the depositional environment for the reservoir facies may have been shallower marine than originally interpreted based on pre-drill wireline log interpretations. There is also evidence of reduced salinity marine conditions during deposition that may be related to the paleo-climate and depositional conditions during the early Eocene.

Alaska↗
USGS2011

Mount Elbert Gas Hydrate Stratigraphic Test Well, Alaska North Slope: Overview of scientific and technical program

The Mount Elbert Gas Hydrate Stratigraphic Test Well was drilled within the Alaska North Slope (ANS) Milne Point Unit (MPU) from February 3 to 19, 2007. The well was conducted as part of a Cooperative Research Agreement (CRA) project co-sponsored since 2001 by BP Exploration (Alaska), Inc. (BPXA) and the U.S. Department of Energy (DOE) in collaboration with the U.S. Geological Survey (USGS) to help determine whether ANS gas hydrate can become a technically and commercially viable gas resource. Early in the effort, regional reservoir characterization and reservoir simulation modeling studies indicated that up to 0.34 trillion cubic meters (tcm; 12 trillion cubic feet, tcf) gas may be technically recoverable from 0.92 tcm (33 tcf) gas-in-place within the Eileen gas hydrate accumulation near industry infrastructure within ANS MPU, Prudhoe Bay Unit (PBU), and Kuparuk River Unit (KRU) areas. To further constrain these estimates and to enable the selection of a test site for further data acquisition, the USGS reprocessed and interpreted MPU 3D seismic data provided by BPXA to delineate 14 prospects containing significant highly-saturated gas hydrate-bearing sand reservoirs. The “Mount Elbert” site was selected to drill a stratigraphic test well to acquire a full suite of wireline log, core, and formation pressure test data. Drilling results and data interpretation confirmed pre-drill predictions and thus increased confidence in both the prospect interpretation methods and in the wider ANS gas hydrate resource estimates. The interpreted data from the Mount Elbert well provide insight into and reduce uncertainty of key gas hydrate-bearing reservoir properties, enable further refinement and validation of the numerical simulation of the production potential of both MPU and broader ANS gas hydrate resources, and help determine viability of potential field sites for future extended term production testing. Drilling and data acquisition operations demonstrated that gas hydrate scientific research programs can be safely, effectively, and efficiently conducted within ANS infrastructure. The program success resulted in a technical team recommendation to project management to drill and complete a long-term production test within the area of existing ANS infrastructure. If approved by stakeholders, this long-term test would build on prior arctic research efforts to better constrain the potential gas rates and volumes that could be produced from gas hydrate-bearing sand reservoirs.

Alaska↗
USGS2020

Evidence for a concealed Midcontinent Rift-related northeast Iowa intrusive complex

Large amplitude aeromagnetic and gravity anomalies over a ~9500 km 2 area of northeast Iowa and southeast Minnesota have been interpreted to reflect the northeast Iowa intrusive complex (NEIIC), a buried intrusive igneous complex composed of mafic/ultramafic rocks in the Yavapai Province (1.8–1.7 Ga). Hundreds of meters of Paleozoic sedimentary cover and a paucity of basement drilling have prevented detailed studies of the NEIIC. Long considered, but not proven, to be related to the ~1.1 Ga Midcontinent Rift System (MRS), the NEIIC is comparable in areal extent to the richly mineralized Duluth Complex and is similarly located near the margin of the MRS. New geochronological and geophysical data together support an MRS affinity for the NEIIC. A dike swarm imaged in aeromagnetic data is cut by intrusions of the NEIIC, and a new apatite U-Pb date of ~1170 Ma on one of the dikes thus represents a maximum age for the NEIIC. A minimum age constraint is suggested by (1) large-volume magmatism associated with the MRS that was the last such event to affect the region; and (2) the presence of reversely magnetized dikes, similar in character to MRS-related dikes elsewhere, that cut several intrusions of the NEIIC. The NEIIC is largely characterized by the presence of multiple zoned intrusions, many of which contain large volumes of mafic-ultramafic rocks and have strong geophysical similarities to alkaline intrusive complexes elsewhere, including the MRS-related Coldwell Complex of Ontario. The largest of the zoned intrusions are ~40 km in diameter and are interpreted to have thicknesses of many kilometers. Suspected faults, alignments of intrusions, and intrusive margins tend to be aligned along northwest and northeast trends that match the trends of the Belle Plaine fault zone and Fayette structural zone, both previously interpreted as pre-MRS, possibly lithospheric-scale discontinuities that may have controlled NEIIC emplacement. These interpretations collectively imply notable potential for the NEIIC to host several different types of undiscovered base metal and critical mineral deposits.

Iowa, Minnesota↗
USGS2021

Geophysical insights into Paleoproterozoic tectonics along the southern margin of the Superior Province, central Upper Peninsula, Michigan, USA

The southern margin of the Archean Superior Province in the central Upper Peninsula of Michigan was a nexus for key Paleoproterozoic tectonic events involved in the ~2.1 Ga rifting of proposed Archean supercraton Superia and subsequent assembly of Laurentia. Interpretations of the region’s tectonic history have historically been hampered by extensive Pleistocene glacial and Paleozoic sedimentary cover and a lack of appropriate geophysical data. These rifting and orogenic events formed geologic effects that are readily mappable with modern geophysical methods. New aeromagnetic and gravity data provide a critical means of mapping and interpreting the complex geological framework through cover, allowing development of significantly richer geographical and process-based perspectives on all these tectonic events. Interpretations of Precambrian contacts and structure are here, for the first time, carried >30 km eastward under Paleozoic cover. Effects of ~2.1 Ga rifting are strongly expressed geophysically, including the Dickinson Group, perhaps a unique record of the progression of rift-related sedimentation and magmatism, shown here to be a geographically extensive and largely concealed tectonic feature of the southern Superior Province. The geophysical evidence for plausible ~2.1 Ga rift-related intrusive magmatism includes a previously unrecognized swarm of northeast-striking mafic dikes cutting Archean rocks and gravity lows produced by granites. Effects of the ~1.87–1.83 Ga Penokean orogeny include gravity and magnetic gradients and pattern breaks along the Niagara fault zone suture, abundant evidence for thin-skinned thrusting and folding in the Menominee iron district, and speculative emplacement of an allochthonous sedimentary sequence in the Calumet trough. Numerous east–west trending structures imaged geophysically likely originated, or were significantly reactivated by, post-Penokean deformation. Metamorphic events at ~1.76 Ga and ~1.65 Ga may correspond to orogenies involving younger, outboard Paleoproterozoic crustal provinces recognized in southern Laurentia. For example, the previously unrecognized West Branch fault, separating the Dickinson Group from Archean rocks, is shown to be a major structure in the region, and is a proposed expression of ~1.76 Ga thick-skinned deformation. Oblique disruptions of crudely east–west striking structures have robust geophysical expressions and are speculatively connected to transpressive deformation at ~1.65 Ga. These new geophysical observations and interpretations collectively help illuminate a critical period in the tectonic evolution of Laurentia, as it transitioned from a disparate array of Archean cratons to a more coherent, growing continent.

Minnesota, Wisconsin, Michigan↗