Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Environmental Practice”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50Linked to original sources

Sediment acoustic index method for computing continuous suspended-sediment concentrations

Suspended-sediment characteristics can be computed using acoustic indices derived from acoustic Doppler velocity meter (ADVM) backscatter data. The sediment acoustic index method applied in these types of studies can be used to more accurately and cost-effectively provide time-series estimates of suspended-sediment concentration and load, which is essential for informed solutions to many sediment-related environmental, engineering, and agricultural concerns. Advantages of this approach over other sediment surrogate methods include: (1) better representation of cross-sectional conditions from large measurement volumes, compared to other surrogate instruments that measure data at a single point; (2) high temporal resolution of collected data; (3) data integrity when biofouling is present; and (4) less rating curve hysteresis compared to streamflow as a surrogate. An additional advantage of this technique is the potential expansion of monitoring suspended-sediment concentrations at sites with existing ADVMs used in streamflow velocity monitoring. This report provides much-needed standard techniques for sediment acoustic index methods to help ensure accurate and comparable documented results. A sediment acoustic index gage is used to collect continuous acoustic backscatter data, using an ADVM deployed in a fixed location, which are related to results from discrete suspended-sediment samples. The raw ADVM backscatter data are adjusted for variables affecting backscatter other than the sediment concentration to compute the sediment-corrected backscatter ( SCB ) and sediment attenuation coefficient ( SAC ). The sediment acoustic index rating (rating) is then developed by relating the sediment characteristics from the periodic samples to the SCB and (or) SAC and other explanatory variables in a site-specific, instrument-specific, simple or multiple linear regression model. The rating is reviewed and checked to ensure the technique has been applied appropriately. This review includes an assessment of the theoretical soundness, the adequacy of the model calibration dataset, and the quality of the regression model and regression diagnostics. The rating can then be applied to the acoustic surrogates and other explanatory variables to obtain continuous records of computed suspended-sediment concentration. The estimates of suspended-sediment concentration can then be paired with streamflow data, if available, to compute continuous records of suspended-sediment load. Once developed, sediment acoustic index ratings must be validated with additional suspended-sediment samples, beyond the period of record used in the rating development, to verify that the regression model continues to adequately represent sediment conditions within the stream. Changes in ADVM configuration or installation, or replacement with another ADVM, may require development of a new rating. The best practices described in this report can be used to develop continuous estimates of suspended-sediment concentration and load using sediment acoustic surrogates to enable more informed and accurate responses to diverse sedimentation issues.

Techniques and Methods↗

Transport and fate of nitrate in a glacial outwash aquifer in relation to ground water age, land use practices, and redox processes

A combination of ground water modeling, chemical and dissolved gas analyses, and chlorofluorocarbon age dating of water was used to determine the relation between changes in agricultural practices, and NO − 3 concentrations in ground water of a glacial outwash aquifer in west-central Minnesota. The results revealed a redox zonation throughout the saturated zone with oxygen reduction occurring near the water table, NO − 3 reduction immediately below it, and then a large zone of ferric iron reduction, with a small area of sulfate (SO 2− 4 ) reduction and methanogenesis (CH 4 ) near the end of the transect. Analytical and NETPATH modeling results supported the hypothesis that organic carbon served as the electron donor for the redox reactions. Denitrification rates were quite small, 0.005 to 0.047 mmol NO − 3 yr −1 , and were limited by the small amounts of organic carbon, 0.01 to 1.45%. In spite of the organic carbon limitation, denitrification was virtually complete because residence time is sufficient to allow even slow processes to reach completion. Ground water sample ages showed that maximum residence times were on the order of 50 to 70 yr. Reconstructed NO − 3 concentrations, estimated from measured NO − 3 and dissolved N gas showed that NO − 3 concentrations have been increasing in the aquifer since the 1940s, and have been above the 714 μmol L −1 maximum contaminant level at most sites since the mid- to late-1960s. This increase in NO − 3 has been accompanied by a corresponding increase in agricultural use of fertilizer, identified as the major source of NO − 3 to the aquifer.

Minnesota↗

Evaluation and use of U.S. Environmental Protection Agency Clean Watersheds Needs Survey data to quantify nutrient loads to surface water, 1978–2012

Changes in municipal and industrial point-source discharges over time have been an important factor affecting nutrient trends in many of the Nation’s streams and rivers. This report documents how three U.S. Environmental Protection Agency (EPA) national datasets—the Permit Compliance System, the Integrated Compliance Information System, and the Clean Watersheds Needs Survey—were evaluated for use in the U.S. Geological Survey National Water-Quality Assessment project to assess the causes of nutrient trends. This report also describes how a database of total nitrogen load and total phosphorous load was generated for select wastewater treatment facilities in the United States based on information reported in the EPA Clean Watersheds Needs Survey. Nutrient loads were calculated for the years 1978, 1980, 1982, 1984, 1986, 1988, 1990, 1992, 1996, 2000, 2004, 2008, and 2012 based on average nitrogen and phosphorous concentrations for reported treatment levels and on annual reported flow values. The EPA Permit Compliance System (PCS) and Integrated Compliance Information System (ICIS), which monitor point-source facility discharges, together are the Nation’s most spatially comprehensive dataset for nutrients released to surface waters. However, datasets for many individual facilities are incomplete, the PCS/ICIS historical data date back only to 1989, and historical data are available for only a limited number of facilities. Additionally, inconsistencies in facility reporting make it difficult to track or identify changes in nutrient discharges over time. Previous efforts made by the U.S. Geological Survey to “fill in” gaps in the PCS/ICIS data were based on statistical methods—missing data were filled in through the use of a statistical model based on the Standard Industrial Classification code, size, and flow class of the facility and on seasonal nutrient discharges of similar facilities. This approach was used to estimate point-source loads for a single point in time; it was not evaluated for use in generating a consistent data series over time. Another national EPA dataset that is available is the Clean Watersheds Needs Survey (CWNS), conducted every 4 years beginning 1973. The CWNS is an assessment of the capital needs of wastewater facilities to meet the water-quality goals set in the Clean Water Act. Data collected about these facilities include location and contact information for the facilities; population served; flow and treatment level of the facility; estimated capital needs to upgrade, repair, or improve facilities for water quality; and nonpoint-source best management practices. Total nitrogen and total phosphorous load calculations for each of the CWNS years were based on treatment level information and average annual outflow (in million gallons per day) from each of the facilities that had reported it. Treatment levels categories (such as Primary, Secondary, or Advanced) were substituted with average total nitrogen and total phosphorous concentrations for each treatment level based on those reported in literature. The CWNS dataset, like the PCS/ICIS dataset, has years where facilities did not report either a treatment level or an annual average outflow, or both. To fill in the data gaps, simple linear assumptions were made based on each facility’s responses to the survey in years bracketing the data gap or immediately before or after the data gap if open ended. Treatment level and flow data unique to each facility were used to complete the CWNS dataset for that facility.

Scientific Investigations Report↗

Approaches for assessing long-term annual yields of highway and urban runoff in selected areas of California with the Stochastic Empirical Loading and Dilution Model (SELDM)

The California Department of Transportation, commonly known as CalTrans, and other municipal separate storm sewer system permittees in California as well as other State departments of transportation nationwide need information about potential loads and yields (loads per unit area) of constituents of concern in stormwater runoff and discharges from stormwater best management practices (BMPs). Although its National Pollution Discharge Elimination System stormwater permit is focused on areas subject to total maximum daily load (TMDL) regulations, CalTrans builds and maintains BMPs to minimize the adverse effects of roadway runoff on receiving waters throughout the State. This report describes approaches used by the U.S. Geological Survey in cooperation with CalTrans for using the Stochastic Empirical Loading and Dilution Model (SELDM) to assess long-term annual yields of highway and urban runoff in selected areas of California. In this study, a series of regional and local yields were simulated to provide statewide planning-level estimates and more refined TMDL-specific yield values. SELDM was used to analyze 368 State roadway and urban runoff yields for 53 runoff quality constituents. The analyses included 222 random-seed analyses, 60 regional State roadway-runoff analyses, 24 regional urban roadway-runoff analyses, and 62 focused TMDL-area analyses. This report describes approaches and statistics used to analyze available hydrologic and runoff quality data in all analyses. Results for all analyses are provided in the model archive, but only a selected subset of results are presented as examples in this report. State roadway runoff, urban runoff, and BMP discharge yields for total suspended solids, total nitrogen, total phosphorus, and total zinc were selected as examples because they are widespread constituents of concern with substantial amounts of State roadway and urban runoff monitoring data. In this report, a hypothetical basin was specified by using available geographic information to demonstrate use of the State roadway and urban runoff yields to estimate long-term annual stormwater loads from developed areas. Application of these yields to the hypothetical basin indicates that although State-roadway yields may be higher than urban-runoff yields for some constituents, State-roadway loads may be a small proportion of total stormwater loads because State roadways themselves are a small fraction of the total impervious area in such basins. Although application of results from this study may have considerable uncertainty for any particular stormwater outfall, the study does provide robust estimates to support basin-scale runoff-load analyses in California. These analyses also provide estimates for the 12 U.S. Environmental Protection Agency level III ecoregions that are completely or partially within the boundaries of the State of California.

California↗

Environmental Setting and the Effects of Natural and Human-Related Factors on Water Quality and Aquatic Biota, Oahu, Hawaii

The island of Oahu is the third largest island of the State of Hawaii, and is formed by the eroded remnants of the Waianae and Koolau shield volcanoes. The landscape of Oahu ranges from a broad coastal plain to steep interior mountains. Rainfall is greatest in the mountainous interior parts of the island, and lowest near the southwestern coastal areas. The structure and form of the two volcanoes in conjunction with processes that have modified the original surfaces of the volcanoes control the hydrologic setting. The rift zones of the volcanoes contain dikes that tend to impede the flow of ground water, leading to high ground-water levels in the dike-impounded ground-water system. In the windward (northeastern) part of the island, dike-impounded ground-water levels may reach the land surface in stream valleys, resulting in ground-water discharge to streams. Where dikes are not present, the volcanic rocks are highly permeable, and a lens of freshwater overlies a brackish-water transition zone separating the freshwater from saltwater. Ground water discharges to coastal springs and streams where the water table in the freshwater-lens system intersects the land surface. The Waianae and Koolau Ranges have been deeply dissected by numerous streams. Streams originate in the mountainous interior areas and terminate at the coast. Some streams flow perennially throughout their entire course, others flow perennially over parts of their course, and the remaining streams flow during only parts of the year throughout their entire course. Hawaiian streams have relatively few native species compared to continental streams. Widespread diverse orders of insects are absent from the native biota, and there are only five native fish, two native shrimp, and a few native snails. The native fish and crustaceans of Hawaii's freshwater systems are all amphidromous (adult lives are spent in streams, and larval periods as marine or estuarine zooplankton). During the 20th century, land-use patterns on Oahu reflected increases in population and decreases in large-scale agricultural operations over time. The last two remaining sugarcane plantations on Oahu closed in the mid-1990's, and much of the land that once was used for sugarcane now is urbanized or used for diversified agriculture. Although two large pineapple plantations continue to operate in central Oahu, some of the land previously used for pineapple cultivation has been urbanized. Natural and human-related factors control surface- and ground-water quality and the distribution and abundance of aquatic biota on Oahu. Natural factors that may affect water quality include geology, soils, vegetation, rainfall, ocean-water quality, and air quality. Human-related factors associated with urban and agricultural land uses also may affect water quality. Ground-water withdrawals may cause saltwater intrusion. Pesticides and fertilizers that were used in agricultural or urban areas have been detected in surface and ground water on Oahu. In addition, other organic compounds associated with urban uses of chemicals have been detected in surface and ground water on Oahu. The effects of urbanization and agricultural practices on instream and riparian areas in conjunction with a proliferation of nonnative fish and crustaceans have resulted in a paucity of native freshwater macrofauna on Oahu. A variety of pesticides, nutrients, and metals are associated with urban and agricultural land uses, and these constituents can affect the fish and invertebrates that live in the streams.

Water-Resources Investigations Report↗

Comparative study of transport processes of nitrogen, phosphorus, and herbicides to streams in five agricultural basins, USA

Agricultural chemical transport to surface water and the linkage to other hydrological compartments, principally ground water, was investigated at five watersheds in semiarid to humid climatic settings. Chemical transport was affected by storm water runoff, soil drainage, irrigation, and how streams were linked to shallow ground water systems. Irrigation practices and timing of chemical use greatly affected nutrient and pesticide transport in the semiarid basins. Irrigation with imported water tended to increase ground water and chemical transport, whereas the use of locally pumped irrigation water may eliminate connections between streams and ground water, resulting in lower annual loads. Drainage pathways in humid environments are important because the loads may be transported in tile drains, or through varying combinations of ground water discharge, and overland flow. In most cases, overland flow contributed the greatest loads, but a significant portion of the annual load of nitrate and some pesticide degradates can be transported under base-flow conditions. The highest basin yields for nitrate were measured in a semiarid irrigated system that used imported water and in a stream dominated by tile drainage in a humid environment. Pesticide loads, as a percent of actual use (LAPU), showed the effects of climate and geohydrologic conditions. The LAPU values in the semiarid study basin in Washington were generally low because most of the load was transported in ground water discharge to the stream. When herbicides are applied during the rainy season in a semiarid setting, such as simazine in the California basin, LAPU values are similar to those in the Midwest basins. Copyright ?? 2008 by the American Society of Agronomy, Crop Science Society of America, and Soil Science Society of America. All rights reserved.

Journal of Environmental Quality↗

Clarity versus complexity: land-use modeling as a practical tool for decision-makers

The last decade has seen a remarkable increase in the number of modeling tools available to examine future land-use and land-cover (LULC) change. Integrated modeling frameworks, agent-based models, cellular automata approaches, and other modeling techniques have substantially improved the representation of complex LULC systems, with each method using a different strategy to address complexity. However, despite the development of new and better modeling tools, the use of these tools is limited for actual planning, decision-making, or policy-making purposes. LULC modelers have become very adept at creating tools for modeling LULC change, but complicated models and lack of transparency limit their utility for decision-makers. The complicated nature of many LULC models also makes it impractical or even impossible to perform a rigorous analysis of modeling uncertainty. This paper provides a review of land-cover modeling approaches and the issues causes by the complicated nature of models, and provides suggestions to facilitate the increased use of LULC models by decision-makers and other stakeholders. The utility of LULC models themselves can be improved by 1) providing model code and documentation, 2) through the use of scenario frameworks to frame overall uncertainties, 3) improving methods for generalizing key LULC processes most important to stakeholders, and 4) adopting more rigorous standards for validating models and quantifying uncertainty. Communication with decision-makers and other stakeholders can be improved by increasing stakeholder participation in all stages of the modeling process, increasing the transparency of model structure and uncertainties, and developing user-friendly decision-support systems to bridge the link between LULC science and policy. By considering these options, LULC science will be better positioned to support decision-makers and increase real-world application of LULC modeling results.

Journal of Environmental Management↗

Next-generation technologies unlock new possibilities to track rangeland productivity and quantify multi-scale conservation outcomes

Historically, relying on plot-level inventories impeded our ability to quantify large-scale change in plant biomass, a key indicator of conservation practice outcomes in rangeland systems. Recent technological advances enable assessment at scales appropriate to inform management by providing spatially comprehensive estimates of productivity that are partitioned by plant functional group across all contiguous US rangelands. We partnered with the Sage Grouse and Lesser Prairie-Chicken Initiatives and the Nebraska Natural Legacy Project to demonstrate the ability of these new datasets to quantify multi-scale changes and heterogeneity in plant biomass following mechanical tree removal, prescribed fire, and prescribed grazing. In Oregon's sagebrush steppe, for example, juniper tree removal resulted in a 21% increase in one pasture's productivity and an 18% decline in another. In Nebraska's Loess Canyons, perennial grass productivity initially declined 80% at sites invaded by trees that were prescriptively burned, but then fully recovered post-fire, representing a 492% increase from nadir. In Kansas' Shortgrass Prairie, plant biomass increased 4-fold (966,809 kg/ha) in pastures that were prescriptively grazed, with gains highly dependent upon precipitation as evidenced by sensitivity of remotely sensed estimates (SD ± 951,308 kg/ha). Our results emphasize that next-generation remote sensing datasets empower land managers to move beyond simplistic control versus treatment study designs to explore nuances in plant biomass in unprecedented ways. The products of new remote sensing technologies also accelerate adaptive management and help communicate wildlife and livestock forage benefits from management to diverse stakeholders.

Kansas, Nebraska, Oregon↗

Modeling vegetation heights from high resolution stereo aerial photography: an application for broad-scale rangeland monitoring

Vertical vegetation structure in rangeland ecosystems can be a valuable indicator for assessing rangeland health and monitoring riparian areas, post-fire recovery, available forage for livestock, and wildlife habitat. Federal land management agencies are directed to monitor and manage rangelands at landscapes scales, but traditional field methods for measuring vegetation heights are often too costly and time consuming to apply at these broad scales. Most emerging remote sensing techniques capable of measuring surface and vegetation height (e.g., LiDAR or synthetic aperture radar) are often too expensive, and require specialized sensors. An alternative remote sensing approach that is potentially more practical for managers is to measure vegetation heights from digital stereo aerial photographs. As aerial photography is already commonly used for rangeland monitoring, acquiring it in stereo enables three-dimensional modeling and estimation of vegetation height. The purpose of this study was to test the feasibility and accuracy of estimating shrub heights from high-resolution (HR, 3-cm ground sampling distance) digital stereo-pair aerial images. Overlapping HR imagery was taken in March 2009 near Lake Mead, Nevada and 5-cm resolution digital surface models (DSMs) were created by photogrammetric methods (aerial triangulation, digital image matching) for twenty-six test plots. We compared the heights of individual shrubs and plot averages derived from the DSMs to field measurements. We found strong positive correlations between field and image measurements for several metrics. Individual shrub heights tended to be underestimated in the imagery, however, accuracy was higher for dense, compact shrubs compared with shrubs with thin branches. Plot averages of shrub height from DSMs were also strongly correlated to field measurements but consistently underestimated. Grasses and forbs were generally too small to be detected with the resolution of the DSMs. Estimates of vertical structure will be more accurate in plots having low herbaceous cover and high amounts of dense shrubs. Through the use of statistically derived correction factors or choosing field methods that better correlate with the imagery, vegetation heights from HR DSMs could be a valuable technique for broad-scale rangeland monitoring needs.

California;Nevada↗

Nutrient concentrations and loads in the northeastern United States - Status and trends, 1975-2003

The U.S. Geological Survey (USGS) National Water-Quality Assessment Program (NAWQA) began regional studies in 2003 to synthesize information on nutrient concentrations, trends, stream loads, and sources. In the northeastern United States, a study area that extends from Maine to central Virginia, nutrient data were evaluated for 130 USGS water-quality monitoring stations. Nutrient data were analyzed for trends in flow-adjusted concentrations, modeled instream (non-flow-adjusted) concentrations, and stream loads for 32 stations with 22 to 29 years of water-quality and daily mean streamflow record during 1975-2003 (termed the long-term period), and for 46 stations during 1993-2003 (termed the recent period), by using a coupled statistical model of streamflow and water quality developed by the USGS. Recent trends in flow-adjusted concentrations of one or more nutrients also were analyzed for 90 stations by using Tobit regression. Annual stream nutrient loads were estimated, and annual nutrient yields were calculated, for 47 stations for the long-term and recent periods, and for 37 additional stations that did not have a complete streamflow and water-quality record for 1993-2003. Nutrient yield information was incorporated for 9 drainage basins evaluated in a national NAWQA study, for a total of 93 stations evaluated for nutrient yields. Long-term downward trends in flow-adjusted concentrations of total nitrogen and total phosphorus (18 and 19 of 32 stations, respectively) indicate regional improvements in nutrient-related water-quality conditions. Most of the recent trends detected for total phosphorus were upward (17 of 83 stations), indicating possible reversals to the long-term improvements. Concentrations of nutrients in many streams persist at levels that are likely to affect aquatic habitat adversely and promote freshwater or coastal eutrophication. Recent trends for modeled instream concentrations, and modeled reference concentrations, were evaluated relative to ecoregion-based nutrient criteria proposed by the U.S. Environmental Protection Agency. Instream concentrations of total nitrogen and total phosphorus persist at levels higher than proposed criteria at more than one-third and about one-half, respectively, of the 46 stations analyzed. Long-term trends in nutrient loads were primarily downward, with downward trends in total nitrogen and total phosphorus loads detected at 12 and 17 of 32 stations, respectively. Upward trends were rare, with one upward trend for total nitrogen loads and none for total phosphorus. Trends in loads of nitrite-plus-nitrate nitrogen included 7 upward and 8 downward trends among 32 stations. Downward trends in loads of ammonia nitrogen and total Kjeldahl nitrogen were detected at all six stations evaluated. Long-term downward trends detected in four of the five largest drainage basins evaluated include: total nitrogen loads for the Connecticut, Delaware, and James Rivers; total Kjeldahl nitrogen and ammonia nitrogen loads for the Susquehanna River; ammonia nitrogen and nitrite-plus-nitrate nitrogen loads for the James River; and total phosphorus loads for the Connecticut and Delaware Rivers. No trends in load were detected for the Potomac River. Nutrient yields were evaluated relative to the extent of land development in 93 drainage basins. The undeveloped land-use category included forested drainage basins with undeveloped land ranging from 75 to 100 percent of basin area. Median total nitrogen yields for the 27 undeveloped drainage basins evaluated, including 9 basins evaluated in a national NAWQA study, ranged from 290 to 4,800 pounds per square mile per year (lb/mi 2 /yr). Total nitrogen yields even in the most pristine drainage basins may be elevated relative to natural conditions, because of high rates of atmospheric deposition of nitrogen in parts of the northeastern United States. Median total phosphorus yields ranged from 12 to 330 lb/mi 2 /yr for the 26 undeveloped basins evaluated. The undeveloped category includes some large drainage basins with point-source discharges and small percentages of developed land; in these basins, streamflow from undeveloped headwater areas dilutes streamflow in more urbanized reaches, and dampens but does not eliminate the point-source "signal" of higher nutrient loads. Median total nitrogen yields generally do not exceed 1,700 lb/mi 2 /yr, and median total phosphorus yields generally do not exceed 100 lb/mi 2 /yr, in the drainage basins that are least affected by human land-use and waste-disposal practices. Agricultural and urban land use has increased nutrient yields substantially relative to undeveloped drainage basins. Median total nitrogen yields for 24 agricultural basins ranged from 1,700 to 26,000 lb/mi 2 /yr, and median total phosphorus yields ranged from 94 to 1,000 lb/mi 2 /yr. The maximum estimated total nitrogen and total phosphorus yields, 32,000 and 16,000 lb/mi 2 /yr, respectively, for all stations in the region were in small (less than 50 square miles (mi 2 )) agricultural drainage basins. Median total nitrogen yields ranged from 1,400 to 17,000 lb/mi 2 /yr in 26 urbanized drainage basins, and median total phosphorus yields ranged from 43 to 1,900 lb/mi 2 /yr. Urbanized drainage basins with the highest nutrient yields are generally small (less than 300 mi2) and are drained by streams that receive major point-source discharges. Instream nutrient loads were evaluated relative to loads from point-source discharges in four drainage basins: the Quinebaug River Basin in Connecticut, Massachusetts, and Rhode Island; the Raritan River Basin in New Jersey; the Patuxent River Basin in Maryland; and the James River Basin in Virginia. Long-term downward trends in nutrient loads, coupled with similar trends in flow-adjusted nutrient concentrations, indicate long-term reductions in the delivery of most nutrients to these streams. However, the absence of recent downward trends in load for most nutrients, coupled with instream concentrations that exceed proposed nutrient criteria in several of these waste-receiving streams, indicates that challenges remain in reducing delivery of nutrients to streams from point sources. During dry years, the total nutrient load from point sources in some of the drainage basins approached or equaled the nutrient load transported by the stream.

Connecticut;Delaware;Maine;Maryl;Massachusetts;New↗

A comparison of runoff quantity and quality from two small basins undergoing implementation of conventional- and low-impact-development (LID) strategies: Cross Plains, Wisconsin, water years 1999–2005

Environmental managers are often faced with the task of designing strategies to accommodate development while minimizing adverse environmental impacts. Low-impact development (LID) is one such strategy that attempts to mitigate environmental degradation commonly associated with impervious surfaces. The U.S. Geological Survey, in cooperation with the Wisconsin Department of Natural Resources, studied two residential basins in Cross Plains, Wis., during water years 1999–2005. A paired-basin study design was used to compare runoff quantity and quality from the two basins, one of which was developed in a conventional way and the other was developed with LID. The conventional-developed basin (herein called “conventional basin”) consisted of curb and gutter, 40-foot street widths, and a fully connected stormwater-conveyance system. The LID basin consisted of grassed swales, reduced impervious area (32-foot street widths), street inlets draining to grass swales, a detention pond, and an infiltration basin. Data collected in the LID basin represented predevelopment through near-complete build-out conditions. Smaller, more frequent precipitation events that produced stormwater discharge from the conventional basin were retained in the LID basin. Only six events with precipitation depths less than or equal to 0.4 inch produced measurable discharge from the LID basin. Of these six events, five occurred during winter months when underlying soils are commonly frozen, and one was likely a result of saturated soil from a preceding storm. In the conventional basin, the number of discharge events, using the same threshold of precipitation depth, was 180, with nearly one-half of those resulting from precipitation depths less than 0.2 inch. Precipitation events capable of producing appreciable discharge in the LID basin were typically those of high intensity or precipitation depth or those that occurred after soils were already saturated. Total annual discharge volume measured from the conventional basin ranged from 1.3 to 9.2 times that from the LID basin. Development of the LID basin did not appreciably alter the hydrologic response to precipitation characterized during predevelopment conditions. Ninety-five percent or more of precipitation in the LID basin was retained during each year of construction from predevelopment through near-complete build-out, surpassing the 90-percent benchmark established for new development by the Wisconsin Department of Natural Resources. The amount of precipitation retained in the conventional basin did not exceed 94 percent and fell below the 90-percent standard 2 of the 6 years monitored. Much of the runoff in the LID basin was retained by an infiltration basin, the largest control structure used to mitigate storm-runoff quantity and quality. The infiltration basin also was the last best-management practice (BMP) used to treat runoff before it left the LID basin as discharge. From May 25, 2002, to September 30, 2005, only 24 of 155 precipitation events exceeded the retention/ infiltrative capacity of the infiltration basin. The overall reduction in runoff volume from these few events was 51 percent. The effectiveness of the infiltration basin decreased as precipitation intensities exceeded 0.5 inch per hour. Annual loads were estimated to characterize the overall effectiveness of low-impact design practices for mitigating delivery of total solids, total suspended solids, and total phosphorus. Annual loads of these three constituents were greater in the LID basin than in the conventional basin in 2000 and 2004. Seventy percent or more of all constituent annual loads were associated with two discharge events in 2000, and a single discharge event produced 50 percent or more of constituent annual loads in 2004. Each of these discharge events was associated with considerable precipitation depths and (or) intensities, ranging from 4.89 to 6.21 inches and from 1.13 to 1.2 inches per hour, respectively. These same storms did not contribute as much of the annual load in the conventional basin. With large storms and saturated soils, the ability of low-impact design techniques to reduce runoff, and thus constituent loads, can be greatly diminished. For both the LID and conventional basins, the temperature of runoff was largely affected by ambient air temperatures. However, the temperature of discharge from the LID basin increased upon runoff cessation. This increase is likely due to solar heating of water that is temporarily stored in the detention pond and infiltration basin.

Wisconsin↗

Brackish tidal marsh management and the ecology of a declining freshwater turtle

Water management practices in tidal marshes of the San Francisco Bay Estuary, California are often aimed at increasing suitable habitat for threatened fish species and sport fishes. However, little is known about how best to manage habitat for other sensitive status species like the semiaquatic freshwater Western Pond Turtle (Actinemys marmorata) that is declining throughout much of its range. Here, we examined the basking activity, abundance, survival, and growth of Western Pond Turtles at two brackish water study sites in Suisun Marsh, California that differed in how they were managed, with one having passive management (i.e., no active water regulation) and another having active management (i.e., water regulated for seasonal hunting). Our results revealed that basking activity was greatest when salinity, water stage, and air temperatures were low, shortwave radiation was high, and wind levels were intermediate. These preferred habitat characteristics often reflected conditions that were naturally maintained at the passively managed, muted tidal site. We also found that turtles were more abundant and had higher survival rates in the passively managed habitat compared to the actively managed habitat (201-323 turtles/km 2 and 96% survival versus 11-135 turtles/km 2 and 77% survival, respectively). Finally, characteristic growth constants from von Bertalanffy models showed that turtles grew more quickly in passively managed habitat compared to the actively managed habitat. Our results suggest that management strategies for this sensitive status species may be more effective if they protect passively managed muted tidal systems that limit or delay extreme cycles of salinity and water levels and conserve elevated terrestrial buffer zones adjacent to muted and full tidal systems.

California↗

Assessing the topographic distribution of legacy soil phosphorus in agricultural fields of the Delmarva Peninsula, Mid-Atlantic Coastal Plain, USA

Phosphorus (P) management remains a challenge in agricultural watersheds. The Choptank River Conservation Effects Assessment Project watershed, located in Maryland and Delaware and draining to the Chesapeake Bay, contains legacy soil P from historical dairy and poultry manure applications. These practices elevated soil P beyond crop needs, contributing to persistent P export to aquatic ecosystems. We assessed spatial P distribution and analyzed GIS (Geographic Information Systems)-derived landscape features driving legacy P movement on a farm (47 ha). We hypothesized that P accumulates in drained lowlands and depressional areas due to gravity-driven processes that accelerate P-enriched water to receiving waters via overland flow. In collaboration with the US Department of Agriculture Legacy P project, we collected 105 soil samples (0- to 5-cm and 5- to 15-cm depths) and 14 ditch sediment samples across five topographic openness classes from a farm with >100 years of dairy manure application. Average Mehlich-III P concentrations were 218 and 179 mg kg −1 at 0- to 5-cm and 5- to 15-cm depths, respectively, with legacy areas defined by P content > 100 mg kg −1 . Soil P and clay particle size were positively correlated ( r = 0.42, p < 0.05), increased as landscape openness decreased, and were negatively correlated with topographic openness (ranging from −0.2 to −0.4, p < 0.05), indicating accumulation of P and clay in low-lying areas. These patterns suggest that historical field-level managements have primarily shaped P distribution, while hydrologic and landscape properties further influence its redistribution via transport pathways and drainage. These findings support the development of landscape models to map critical source areas in low-relief watersheds and guide targeted mitigation in high-risk P export zones.

Maryland↗

Changing agricultural practices: Potential consequences to aquatic organisms

Agricultural practices pose threats to biotic diversity in freshwater systems with increasing use of glyphosate-based herbicides for weed control and animal waste for soil amendment becoming common in many regions. Over the past two decades, these particular agricultural trends have corresponded with marked declines in populations of fish and mussel species in the Upper Conasauga River watershed in Georgia/Tennessee, USA. To investigate the potential role of agriculture in the population declines, surface waters and sediments throughout the basin were tested for toxicity and analyzed for glyphosate, metals, nutrients, and steroid hormones. Assessments of chronic toxicity with Ceriodaphnia dubia and Hyalella azteca indicated that few water or sediment samples were harmful and metal concentrations were generally below impairment levels. Glyphosate was not observed in surface waters, although its primary degradation product, aminomethyl phosphonic acid (AMPA), was detected in 77% of the samples (mean = 509 μg/L, n = 99) and one or both compounds were measured in most sediment samples. Waterborne AMPA concentrations supported an inference that surfactants associated with glyphosate may be present at levels sufficient to affect early life stages of mussels. Nutrient enrichment of surface waters was widespread with nitrate (mean = 0.7 mg NO 3 -N/L, n = 179) and phosphorus (mean = 275 μg/L, n = 179) exceeding levels associated with eutrophication. Hormone concentrations in sediments were often above those shown to cause endocrine disruption in fish and appear to reflect the widespread application of poultry litter and manure. Observed species declines may be at least partially due to hormones, although excess nutrients and herbicide surfactants may also be implicated.

Environmental Monitoring and Assessment↗

Estimation of Constituent Concentrations, Loads, and Yields in Streams of Johnson County, Northeast Kansas, Using Continuous Water-Quality Monitoring and Regression Models, October 2002 through December 2006

Johnson County is one of the most rapidly developing counties in Kansas. Population growth and expanding urban land use affect the quality of county streams, which are important for human and environmental health, water supply, recreation, and aesthetic value. This report describes estimates of streamflow and constituent concentrations, loads, and yields in relation to watershed characteristics in five Johnson County streams using continuous in-stream sensor measurements. Specific conductance, pH, water temperature, turbidity, and dissolved oxygen were monitored in five watersheds from October 2002 through December 2006. These continuous data were used in conjunction with discrete water samples to develop regression models for continuously estimating concentrations of other constituents. Continuous regression-based concentrations were estimated for suspended sediment, total suspended solids, dissolved solids and selected major ions, nutrients (nitrogen and phosphorus species), and fecal-indicator bacteria. Continuous daily, monthly, seasonal, and annual loads were calculated from concentration estimates and streamflow. The data are used to describe differences in concentrations, loads, and yields and to explain these differences relative to watershed characteristics. Water quality at the five monitoring sites varied according to hydrologic conditions; contributing drainage area; land use (including degree of urbanization); relative contributions from point and nonpoint constituent sources; and human activity within each watershed. Dissolved oxygen (DO) concentrations were less than the Kansas aquatic-life-support criterion of 5.0 mg/L less than 10 percent of the time at all sites except Indian Creek, which had DO concentrations less than the criterion about 15 percent of the time. Concentrations of suspended sediment, chloride (winter only), indicator bacteria, and pesticides were substantially larger during periods of increased streamflow. Suspended-sediment concentration was nearly always largest at the Mill Creek site. The Mill Creek watershed is undergoing rapid development that likely contributed to larger sustained sediment concentrations. During most of the time, the smallest sediment concentrations occurred at the Indian Creek site, the most urban of the monitored sites, likely because most of the streamflow originates from wastewater-treatment facilities located just upstream from the monitoring site. However, estimated annual suspended-sediment load and yield were largest annually at the Indian Creek site because of substantial contributions during storm runoff. At least 90 percent of the total annual sediment load in 2005?06 at all five monitoring sites occurred in less than 2 percent of the time, generally associated with large storm runoff. About 50 percent of the 2005 sediment load at the Blue River site occurred during a single 3-day storm, the equivalent of less than 1 percent of the time. Suspended-sediment concentration is statistically related to other water-quality constituents, and these relations have potential implications for implementation of best management practices because, if sediment concentrations are decreased, concentrations of sediment-associated constituents such as suspended solids, some nutrients, and bacteria will also likely decrease. Chloride concentrations were largest at the Indian and Mill Creek sites, the two most urban stream sites which also are most affected by road-salt runoff and wastewater-treatment-facility discharges. Two chloride runoff occurrences in January?February 2005 accounted for 19 percent of the total chloride load in Indian Creek in 2005. Escherichia coli density at the Indian Creek site was nearly always largest of the five sites with a median density more than double that of any other site and 15 times the density at the Blue River site which is primarily nonurban. More than 97 percent of the fecal coliform bacteria load at the Indian Creek site and near the B

Scientific Investigations Report↗

Changes in groundwater quality in a conduit-flow-dominated karst aquifer, following BMP implementation

Water quality in the Pleasant Grove Spring karst groundwater basin, Logan County, Kentucky, was monitored to determine the effectiveness of best management practices (BMPs) in protecting karst aquifers. Ninety-two percent of the 4,069-ha (10,054-acre) watershed is used for agriculture. Water-quality monitoring began in October 1992 and ended in November 1998. By the fall of 1995 approximately 72% of the watershed was enrolled in BMPs sponsored by the US Department of Agriculture Water Quality Incentive Program (WQIP). Pre-BMP nitrate-nitrogen concentration averaged 4.65 mg/1. The median total suspended solids concentration was 127 mg/1. The median triazine concentration measured by immunosorbent assay was 1.44 ??tg/l. Median bacteria counts were 418 colonies per 100 ml (col/100 ml) for fecal coliform and 540 col/100 ml for fecal streptococci. Post-BMP, the average nitrate-nitrogen concentration was 4.74 mg/1. The median total suspended solids concentration was 47.8 mg/1. The median triazine concentration for the post-BMP period was 1.48 ??g/1. The median fecal coliform count increased to 432 col/100 ml after BMP implementation, but the median fecal streptococci count decreased to 441 col/100 ml. The pre- and post-BMP water quality was statistically evaluated by comparing the annual mass flux, annual descriptive statistics, and population of analyses for the two periods. Nitrate-nitrogen concentration was unchanged. Increases in atrazine-equivalent flux and triazine geometric averages were not statistically significant. Total suspended solids concentration decreased slightly, whereas orthophosphate concentration increased slightly. Fecal streptococci counts were reduced. The BMPs were only partially successful because the types available and the rules for participation resulted in less effective BMPs being chosen. Future BMP programs in karst areas should emphasize buffer strips around sinkholes, excluding livestock from streams and karst windows, and withdrawing land from production.

Environmental Geology↗

Stream sediment sources in midwest agricultural basins with land retirement along channel

Documenting the effects of agricultural land retirement on stream-sediment sources is critical to identifying management practices that improve water quality and aquatic habitat. Particularly difficult to quantify are the effects from conservation easements that commonly are discontinuous along channelized streams and ditches throughout the agricultural midwestern United States. Our hypotheses were that sediment from cropland, retired land, stream banks, and roads would be discernible using isotopic and elemental concentrations and that source contributions would vary with land retirement distribution along tributaries of West Fork Beaver Creek in Minnesota. Channel-bed and suspended sediment were sampled at nine locations and compared with local source samples by using linear discriminant analysis and a four-source mixing model that evaluated seven tracers: In, P, total C, Be, Tl, Th, and Ti. The proportion of sediment sources differed significantly between suspended and channel-bed sediment. Retired land contributed to channel-bed sediment but was not discernible as a source of suspended sediment, suggesting that retired-land material was not mobilized during high-flow conditions. Stream banks were a large contributor to suspended sediment; however, the percentage of stream-bank sediment in the channel bed was lower in basins with more continuous retired land along the riparian corridor. Cropland sediments had the highest P concentrations; basins with the highest cropland-sediment contributions also had the highest P concentrations. Along stream reaches with retired land, there was a lower proportion of cropland material in suspended sediment relative to sites that had almost no land retirement, indicating less movement of nutrients and sediment from cropland to the channel as a result of land retirement.

Minnesota↗

Wide-area debris field and seabed characterization of a deep ocean dump site surveyed by autonomous underwater vehicles

Disposal of industrial and hazardous waste in the deep ocean was a pervasive global practice near coastlines in the 20th century. Uncertainty in the quantity, location, and contents of dumped materials at historical disposal sites underscores ongoing risks to marine ecosystems and human health. This study presents analysis of a 150-km2 wide-area sidescan sonar survey conducted in March 2021 with two autonomous underwater vehicles (AUVs) at an offshore dumpsite in San Pedro Basin, California. Previous camera surveys located 60 barrels and other debris; sediment analysis in the region showed varying concentrations of the insecticidal chemical Dichlorodiphenyl-trichloroethane (DDT), for which an estimated 350-700 metric tons was discarded in the San Pedro Basin between 1947 and 1961. A lack of primary historical documents from Montrose Chemical or California Salvage Company that specify the DDT acid waste disposal method has contributed to the ambiguity surrounding whether the dumping method was via bulk discharge or containerized units. Barrels and debris visually detected during previous surveys by Remotely Operated Vehicles (ROVs) Jason and SuBastian and AUV Sentry served as the basis for ground truth testing and object classification using size and acoustic intensity characteristics. Target detection and classification algorithms were developed using image and signal processing techniques that resulted in the identification of over 74,000 debris targets within the survey region. Statistical, spectral, and machine learning techniques are used to characterize seabed variability and for bottom-type classification. These analytical techniques combined with the survey capabilities of AUVs provide a framework for efficient mapping and characterization of uncharted deep-water disposal sites.

California↗