Geology ReportsSearch

SEARCH · Geology Reports

Results for “Water Practice &Technology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

85 records · Page 5Linked to original sources

Instream water use in the United States: water laws and methods for determining flow requirements

Water use generally is divided into two primary classes - offstream use and instream use. In offstream use, sometimes called out-of-stream or diversionary use, water is withdrawn (diverted) from a stream or aquifer and transported to the place of use. Examples are irrigated agriculture, municipal water supply, and industrial use. Each of these offstream uses, which decreases the volume of water available downstream from the point of diversion, is discussed in previous articles in this volume. Instream use, which generally does not diminish the flow downstream from its point of use, and its importance are described in this article. One of the earliest instream uses of water in the United States was to turn the water wheels that powered much of the Nation's industry in the 18th and 19th centuries. Although a small volume of water might have been diverted to a mill near streamside, that water usually was returned to the stream near the point of diversion and, thus, the flow was not diminished downstream from the mill. Over time, the generation of hydroelectric power replaced mill wheels as a means of converting water flow into energy. Since the 1920's, the generation of hydroelectric power increasingly has become a major instream use of water. By 1985, more than 3 billion acre-feet of water (3,050,000 million gallons per day) was used annually for hydropower generation (Solley and others, 1988, p. 45)-enough water to cover the State of Colorado to a depth of 51 feet. Navigation is another instream use with a long history. The Lewis and Clark expedition journals and many of Mark Twain's novels illustrate the extent to which the Nation originally depended on adequate streamfiows for basic transportation. Navigation in the 1980's is still considered to be an instream use; however, it often is based upon a stream system that has been modified greatly through channelization, diking, and construction of dams and locks. The present (1987) inland water navigation system in the conterminous United States consists of about 12,000 miles of maintained waterways, over which about 500 million tons of cargo is carried each year (U.S. Army Corps of Engineers, 1988, p. 16). Although not so widely practiced in recent years, streams have been used to dispose of raw waste products from homes, communities, and factories. This use has been discouraged by law and public policy because of public health concerns and the damage it causes to the environment. Beginning in the mid-1960's, other instream uses gained new prominence in the water-resources arena-the assertion of a legal right to a free-flowing stream for biological, recreational, and esthetic purposes. These uses themselves, however, are not new. Riverine habitat always has produced fish, and the beauty of flowing water always has evoked a strong sense of esthetic appreciation. What is new is the emerging legitimacy and awareness of these noneconomic uses under State and Federal laws and regulations. In the past, environmental uses of flowing water were ignored, for the most part, under a long-standing legal tradition that favored offstream uses and certain instream uses that had a strong economic basis. The history of instream-flow policy debate really concerns those recently recognized types of interim uses. Although the more transitional water uses have been protected by law, the recognition of other in stream uses has resulted in substantial changes in State water laws. Although methods for determining the volume of water needed for most traditional water uses are relatively straight-forward and well-established, methods for determining water requirements for the in stream uses have been developed only recently and are continuing to evolve. Water laws that have favored the more traditional water uses, the inherent nature of conflict between instream and offstream water uses, and the special kinds of technological and philosophical problems posed by the "newer" types of instream uses are described below. Water laws that have been passed to accommodate the more recently recognized instream uses are summarized.

Report

Chapter J: Issues and challenges in the application of geostatistics and spatial-data analysis to the characterization of sand-and-gravel resources

Sand-and-gravel (aggregate) resources are a critical component of the Nation's infrastructure, yet aggregate-mining technologies lag far behind those of metalliferous mining and other sectors. Deposit-evaluation and site-characterization methodologies are antiquated, and few serious studies of the potential applications of spatial-data analysis and geostatistics have been published. However, because of commodity usage and the necessary proximity of a mine to end use, aggregate-resource exploration and evaluation differ fundamentally from comparable activities for metalliferous ores. Acceptable practices, therefore, can reflect this cruder scale. The increasing use of computer technologies is colliding with the need for sand-and-gravel mines to modernize and improve their overall efficiency of exploration, mine planning, scheduling, automation, and other operations. The emergence of megaquarries in the 21st century will also be a contributing factor. Preliminary research into the practical applications of exploratory-data analysis (EDA) have been promising. For example, EDA was used to develop a linear-regression equation to forecast freeze-thaw durability from absorption values for Lower Paleozoic carbonate rocks mined for crushed aggregate from quarries in Oklahoma. Applications of EDA within a spatial context, a method of spatial-data analysis, have also been promising, as with the investigation of undeveloped sand-and-gravel resources in the sedimentary deposits of Pleistocene Lake Bonneville, Utah. Formal geostatistical investigations of sand-and-gravel deposits are quite rare, and the primary focus of those studies that have been completed is on the spatial characterization of deposit thickness and its subsequent effect on ore reserves. A thorough investigation of a gravel deposit in an active aggregate-mining area in central Essex, U.K., emphasized the problems inherent in the geostatistical characterization of particle-size-analysis data. Beyond such factors as common drilling methods jeopardizing the accuracy of the size-distribution curve, the application of formal geostatistical principles has other limitations. Many of the variables used in evaluating gravel deposits, including such sedimentologic parameters as sorting and such United Soil Classification System parameters as gradation coefficient, are nonadditive. Also, uniform sampling methods, such as drilling, are relatively uncommon, and sampling is generally accomplished by a combination of boreholes, water-well logs, test pits, trenches, stratigraphic columns from exposures, and, possibly, some geophysical cross sections. When evaluated in consideration of the fact that uniform mining blocks are also uncommon in practice, subsequent complexities in establishment of the volume/variance relation are inevitable. Several approaches exist to confront the limitations of geostatistical methods in evaluating sand-and-gravel deposits. Initially, we must acknowledge the practical requirements of the aggregate industry, as well as the limitations of the data collected by that industry, as a function of what the industry requires at the practical level, and consider that broader acceptance of formal geostatistics may require modifications of typical exploration and sampling protocols. Future investigations should utilize data from the full spectrum of sand-and-gravel deposits (flood plain, glacial, catastrophic flood, and marine), integrate such other disci plines as sedimentology and geophysics into the research, develop commodity-specific approaches to nonadditive variables, and include the results of comparative drilling.

Bulletin

Economic and health risk trade-offs of swim closures at a Lake Michigan beach

This paper presents a framework for analyzing the economic, health, and recreation implications of swim closures related to high fecal indicator bacteria (FIB) levels. The framework utilizes benefit transfer policy analysis to provide a practical procedure for estimating the effectiveness of recreational water quality policies. Evaluation criteria include the rates of intended and unintended management outcomes, whether the chosen protocols generate closures with positive net economic benefits to swimmers, and the number of predicted illnesses the policy is able to prevent. We demonstrate the framework through a case study of a Lake Michigan freshwater beach using existing water quality and visitor data from 1998 to 2001. We find that a typical closure causes a net economic loss among would-be swimmers totaling $1274-37 030/ day, depending on the value assumptions used. Unnecessary closures, caused by high indicator variability and a 24-h time delay between when samples are taken and the management decision can be made, occurred on 14 (12%) out of 118 monitored summer days. Days with high FIB levels when the swim area is open are also common but do relatively little economic harm in comparison. Also, even if the closure policy could be implemented daily and perfectly without error, only about 42% of predicted illnesses would be avoided. These conclusions were sensitive to the relative values and risk preferences that swimmers have for recreation access and avoiding health effects, suggesting a need for further study of the impacts of recreational water quality policies on individuals.

Environmental Science & Technology

Linking the agricultural landscape of the Midwest to stream health with structural equation modeling

Multiple physical and chemical stressors can simultaneously affect the biological condition of streams. To better understand the complex interactions of land-use practices, water quality, and ecological integrity of streams, the U.S. Geological Survey National Water Quality Assessment Project is conducting regional-scale assessments of stream condition across the United States. In the summer of 2013, weekly water samples were collected from 100 streams in the Midwestern United States. Employing watershed theory, we used structural equation modeling (SEM) to represent a general hypothesis for how 16 variables (previously identified to be important to stream condition) might be inter-related. Again, using SEM, we evaluated the ability of this “stressor network” to explain variations in multimetrics of algal, invertebrate, and fish community health, trimming away any environmental variables not contributing to an explanation of the ecological responses. Seven environmental variables—agricultural and urban land use, sand content of soils, basin area, percent riparian area as forest, channel erosion, and relative bed stability—were found to be important for all three-community metrics. The algal and invertebrate models included water-chemistry variables not included in the fish model. Results suggest that ecological integrity of Midwest streams are affected by both agricultural and urban land uses and by the natural geologic setting, as indicated by the sand content of soils. Chemicals related to crops (pesticides and nutrients) and residential uses (pyrethroids) were found to be more strongly related to ecological integrity than were natural factors (riparian forest, watershed soil character).

Environmental Science & Technology

Differentiating aquatic plant communities in a eutrophic river using hyperspectral and multispectral remote sensing

This study evaluates the efficacy of remote sensing technology to monitor species composition, areal extent and density of aquatic plants (macrophytes and filamentous algae) in impoundments where their presence may violate water-quality standards. Multispectral satellite (IKONOS) images and more than 500 in situ hyperspectral samples were acquired to map aquatic plant distributions. By analyzing field measurements, we created a library of hyperspectral signatures for a variety of aquatic plant species, associations and densities. We also used three vegetation indices. Normalized Difference Vegetation Index (NDVI), near-infrared (NIR)-Green Angle Index (NGAI) and normalized water absorption depth (DH), at wavelengths 554, 680, 820 and 977 nm to differentiate among aquatic plant species composition, areal density and thickness in cases where hyperspectral analysis yielded potentially ambiguous interpretations. We compared the NDVI derived from IKONOS imagery with the in situ, hyperspectral-derived NDVI. The IKONOS-based images were also compared to data obtained through routine visual observations. Our results confirmed that aquatic species composition alters spectral signatures and affects the accuracy of remote sensing of aquatic plant density. The results also demonstrated that the NGAI has apparent advantages in estimating density over the NDVI and the DH. In the feature space of the three indices, 3D scatter plot analysis revealed that hyperspectral data can differentiate several aquatic plant associations. High-resolution multispectral imagery provided useful information to distinguish among biophysical aquatic plant characteristics. Classification analysis indicated that using satellite imagery to assess Lemna coverage yielded an overall agreement of 79% with visual observations and >90% agreement for the densest aquatic plant coverages. Interpretation of biophysical parameters derived from high-resolution satellite or airborne imagery should prove to be a valuable approach for assessing the effectiveness of management practices for controlling aquatic plant growth in inland waters, as well as for routine monitoring of aquatic plants in lakes and suitable lentic environments. ?? 2010 Blackwell Publishing Ltd.

Freshwater Biology

Actual evapotranspiration modeling using the operational Simplified Surface Energy Balance (SSEBop) approach

Remote-sensing technology and surface-energy-balance methods can provide accurate and repeatable estimates of actual evapotranspiration ( ETa ) when used in combination with local weather datasets over irrigated lands. Estimates of ETa may be used to provide a consistent, accurate, and efficient approach for estimating regional water withdrawals for irrigation and associated consumptive use (CU), especially in arid cropland areas that require supplemental water due to insufficient natural supplies from rainfall, soil moisture, or groundwater. ETa in these areas is considered equivalent to CU, and represents the part of applied irrigation water that is evaporated and/or transpired, and is not available for immediate reuse. A recent U.S. Geological Survey study demonstrated the application of the remote-sensing-based Simplified Surface Energy Balance (SSEB) model to estimate 10-year average ETa at 1-kilometer resolution on national and regional scales, and compared those ETa values to the U.S. Geological Survey’s National Water-Use Information Program’s 1995 county estimates of CU. The operational version of the operational SSEB (SSEBop) method is now used to construct monthly, county-level ETa maps of the conterminous United States for the years 2000, 2005, and 2010. The performance of the SSEBop was evaluated using eddy covariance flux tower datasets compiled from 2005 datasets, and the results showed a strong linear relationship in different land cover types across diverse ecosystems in the conterminous United States (correlation coefficient [r] ranging from 0.75 to 0.95). For example, r for woody savannas (0.75), grassland (0.75), forest (0.82), cropland (0.84), shrub land (0.89), and urban (0.95). A comparison of the remote-sensing SSEBop method for estimating ETa and the Hamon temperature method for estimating potential ET ( ETp ) also was conducted, using regressions of all available county averages of ETa for 2005 and 2010, and yielded correlations of r = 0.60 and r = 0.71, respectively. Correlations generally are stronger in the Southeast where ETa is close to ETp . SSEBop ETa provides more spatial detail and accuracy in the Southwest where irrigation is practiced in a smaller proportion of the region.

Scientific Investigations Report

Wide-area debris field and seabed characterization of a deep ocean dump site surveyed by autonomous underwater vehicles

Disposal of industrial and hazardous waste in the deep ocean was a pervasive global practice near coastlines in the 20th century. Uncertainty in the quantity, location, and contents of dumped materials at historical disposal sites underscores ongoing risks to marine ecosystems and human health. This study presents analysis of a 150-km2 wide-area sidescan sonar survey conducted in March 2021 with two autonomous underwater vehicles (AUVs) at an offshore dumpsite in San Pedro Basin, California. Previous camera surveys located 60 barrels and other debris; sediment analysis in the region showed varying concentrations of the insecticidal chemical Dichlorodiphenyl-trichloroethane (DDT), for which an estimated 350-700 metric tons was discarded in the San Pedro Basin between 1947 and 1961. A lack of primary historical documents from Montrose Chemical or California Salvage Company that specify the DDT acid waste disposal method has contributed to the ambiguity surrounding whether the dumping method was via bulk discharge or containerized units. Barrels and debris visually detected during previous surveys by Remotely Operated Vehicles (ROVs) Jason and SuBastian and AUV Sentry served as the basis for ground truth testing and object classification using size and acoustic intensity characteristics. Target detection and classification algorithms were developed using image and signal processing techniques that resulted in the identification of over 74,000 debris targets within the survey region. Statistical, spectral, and machine learning techniques are used to characterize seabed variability and for bottom-type classification. These analytical techniques combined with the survey capabilities of AUVs provide a framework for efficient mapping and characterization of uncharted deep-water disposal sites.

California

Water-quality characteristics and trends for selected wells possibly influenced by wastewater disposal at the Idaho National Laboratory, Idaho, 1981-2012

The U.S. Geological Survey, in cooperation with the U.S. Department of Energy, analyzed water-quality data collected from 64 aquifer wells and 35 perched groundwater wells at the Idaho National Laboratory (INL) from 1981 through 2012. The wells selected for the study were wells that possibly were affected by wastewater disposal at the INL. The data analyzed included tritium, strontium-90, major cations, anions, nutrients, trace elements, total organic carbon, and volatile organic compounds. The analyses were performed to examine water-quality trends that might influence future management decisions about the number of wells to sample at the INL and the type of constituents to monitor. The data were processed using custom computer scripts developed in the R programming language. Summary statistics were calculated for the datasets. Water-quality trends were determined using a parametric survival regression model to fit the observed data, including left-censored, interval-censored, and uncensored data. The null hypothesis of the trend test was that no relation existed between time and concentration; the alternate hypothesis was that time and concentration were related through the regression equation. A significance level of 0.05 was selected to determine if the trend was statistically significant. Trend test results for tritium and strontium-90 concentrations in aquifer wells indicated that nearly all wells had decreasing or no trends. Similarly, trends in perched groundwater wells were mostly decreasing or no trends; trends were increasing in two perched groundwater wells near the Advanced Test Reactor Complex. Decreasing trends generally are attributed to lack of recent wastewater disposal and radioactive decay. Trend test results for chloride, sodium, sulfate, nitrite plus nitrate (as nitrogen), chromium, trace elements, and total organic carbon concentrations in aquifer wells indicated that most wells had either decreasing or no trends. The decreasing trends in these constituents are attributed to decrease in disposal of these constituents, as well as discontinued use of the old percolation ponds south of the Idaho Nuclear Technology and Engineering Center (INTEC) and redirection of wastewater to the new percolation ponds 2 miles southwest of the INTEC in 2002. Chloride (along with sodium, sulfate, and some nitrate) concentrations in wells south of the INTEC may be influenced by episodic recharge from the Big Lost River. These constituent concentrations decrease during wetter periods when there is probably more recharge from the Big Lost River and increase during dry periods, when there is less recharge. Some wells downgradient of the Central Facilities Area and near the southern boundary of the INL showed increasing trends in sodium concentration, whereas there was no trend in chloride. The increasing trend for sodium could be due to the long term influence of wastewater disposal from upgradient facilities and the lack of trend for chloride could be because chloride is more mobile than sodium and more dispersed in the aquifer system. Volatile organic compound concentration trends were analyzed for nine aquifer wells. Trend test results indicated an increasing trend for carbon tetrachloride for the Radioactive Waste Management Complex Production Well for the period 1987–2012; however, trend analyses of data collected since 2005 show no statistically significant trend indicating that engineering practices designed to reduce movement of volatile organic compounds to the aquifer may be having a positive effect on the aquifer.

Idaho

Iron-ore resources of the United States including Alaska and Puerto Rico, 1955

The importance of iron ore, the basic raw material of steel, as a fundamental mineral, resource is shown by the fact that about 100 million long tons of steel is used annually in the economy of the United States, as compared with a combined total of about 5 million long tons of copper, lead, zinc, and aluminum. Satisfying this annual demand for steel requires about 110 million tons of iron ore and 70 million tons of scrap iron and steel. The average annual consumption of iron ore in the United States from 1951 to 1955, inclusive, was about 110 million long tons, which is about twice the annual average from 1900 to 1930. Production of iron ore in the United States in this 5-year period averaged approximately 100 million long tons annually, divided by regions as follows (in percent): Lake Superior, 84.1; southeastern, 6.7; western, 6.7; northeastern, 1.4; and central and gulf, 1.1. Mining of iron ore began in the American Colonies about 1619, and for 225 years it was limited to eastern United States where fuel and markets were readily available. Production of iron ore from the Lake Superior region began in 1846; the region became the leading domestic source by 1890, and the Mesabi range in Minnesota has been the world's most productive area since 1896. Proximity of raw materials, water transportation, and markets has resulted in centralization of the country's iron and steel industry in the lower Great Lakes area. Increased imports of iron ore being delivered to eastern United States as well as demands for steel in nearby markets have given impetus to expansion in the steel-making capacity in this area. The four chief iron-ore minerals - hematite, liminite, magnetite, and siderite - are widely distributed but only locally form deposits of sufficient tonnage and grade to be commercially valuable at the present time. The iron content of these minerals, of which hematite is the most important, ranges from 48 percent in siderite to 72 percent in magnetite, but as these minerals are associated with other rock-forming minerals, the iron content of marketable ore has a lower range from 30 to 67 percent. Chemical constituents other than iron also are important in determining the marketability of iron ore. Although some iron ores can be used in the blast furnace as mined, others must first be improved either chemically by reduction of undesirable constituents, or physically by aggregation. Phosphorus and sulfur particularly are common deleterious elements; excessive silica is also undesirable but within certain limits can be controlled by additional flux. Lime and magnesia are beneficial in specified amounts because of their fluxing qualities, and a small amount of alumina improves the fluidity of slag. Manganese is especially desirable as a deoxidizing and desulfurizing agent. Titanium, chromium, and nickel must also be considered in the use of ore containing these elements. The principal iron-ore deposits in the United States have been formed by three processes. Hematite-bearing bedded deposits such as those at Birmingham, Ala., are marine sedimentary rocks which, except for weathering along the outcrop, have remained practically unaltered since deposition. Deposits of the Lake Superior region, also in sedimentary strata, originally had a slightly lower iron content than those at-Birmingham, but ore bodies of hematite and limonite were formed by removal of other constituents in solution after deposition of the beds, with a relative increase of iron content in the material remaining. Limestone adjacent to igneous intrusions has been replaced by magnetite deposits at Cornwall, Pa., and by hematite-magnetite deposits near Cedar City, Utah. Magnetite deposits in New Jersey and in the Adirondack Mountains of New York are generally believed to have been formed by replacement of grains of other minerals in metamorphic rocks. Iron-ore resources are made up of reserves of iron ore, material usable under existing economic and technologic conditions; and potential ore, material likely to become usable under more favorable conditions. The tonnage and grade of material of combined reserves and potential ore in each of the deposits known or believed to contain at least 200,000 long tons of iron-ore resources are tabulated in this report, and numerous sources of additional information are given in a selected bibliography. The total domestic iron-ore resources are estimated at approximately 75,000 million long tons of crude ore. About 10,000 million tons of the resources is reserves of crude ore that will probably yield 5,500 million tons of concentrates and direct-shipping ore. About 65,000 million tons is potential ore and may yield 25,000 million tons of concentrates and some direct-shipping ore.

Bulletin

Summary appraisals of the nation's ground-water resources – California region

Most people in the California Region live in a semiarid or arid climate, with precipitation less than the potential evapotranspiration- environments of perennial water deficiency. The deficiency becomes most onerous during the characteristically rainless summers and during recurrent droughts that may continue for 10--20 years. However, water from winter rain and snow can be stored for use during the dry summer months, and water stored during a wet climatic period can be used in a succeeding dry period; moreover, perennial deficiency can be overcome by bringing water from areas of perennial surplus. Ground-water reservoirs have especial significance in arid and semiarid regions as repositories where water is stored or can be stored with minimum loss by evaporation. Nearly all the ground-water reservoirs of the California Region are in alluvial sediments of valleys and plains that flank the mountain ranges. The largest, underlying the vast Central Valley, occupies 10 percent of the area of the region, has an estimated usable capacity exceeding 100 million acre-feet (125 cubic kilometres), and has an annual pumpage from wells of about 13 million acre-feet (16 cubic kilometres). Another 10 percent of the region is occupied by 55 developed ground-water reservoirs that are widely distributed; aggregate annual pumpage from them is about 3 1/2 million acre-feet (4 cubic kilometres). In the southeastern desert about 60 ground-water reservoirs occupy still another 10 percent of the region; these have been explored only enough to show that most have some usable water, but current use is negligible. In northeastern California and adjacent Oregon and Nevada, ground-water reservoirs are identified only in valleys and lowlands where wells are feasible, but basaltic rocks of the Cascade Range and Modoc Plateau are excellent aquifers distributed over an area constituting about 15 percent of the region. In sum, slightly less than half the California Region is underlain by ground-water reservoirs, either in valley fill or in volcanic rocks, which can yield significant quantities of water to wells. The rest of the California Region includes the mountains, canyons, slopes, and foothills of the Sierra Nevada, Coast Ranges, and Basin Ranges, whose consolidated rocks and products of their weathering may be permeable locally but are not generally so. Here, the prevailing method of ground-water development is still mostly trial and error, and while in many places a well can yield enough water for a family, some families might have to do without amenities such as flush toilets and automatic washers. For more than half a century the California Region has led all others in North America in pumping of ground water as well as in the area, variety, yield, and export of crops irrigated by water from wells. It has led in the development and use of deep-well turbine pumps for large yield and in the drilling of water wells to great depths. At the same time, such developments have resulted in the elimination of artesian pressures that produced thousands of flowing wells in the 19th century and led to the wide distribution of "falling water tables." Also, California was first to induce encroachment of seawater into wells (in 1906); first to recognize subsidence of land caused by pumping from wells (in 1933), generating news about land sinking in San Jose, Long Beach, and along the Delta-Mendota and Friant-Kern Canals; and first to experience pollution of ground-water reservoirs by brines, chemicals, industrial wastes, and petroleum byproducts including gasoline. The region has led in research in several fields leading to solution of many of these problems. Ground-water problems developed rapidly after World War II with booming population, agriculture, industry, and water demand during several years of regionwide drought. Water levels in wells trended downward almost everywhere as a natural effect of the drought and at accelerated rates in areas of pumping for new enterprises or to supplement subnormal surface-water supplies. The declines in many pumping areas exceeded 100 feet (30 metres), and in some confined aquifers the potentiometric surface was drawn down more than 330 feet (100 metres). The depletion of ground-water storage has had "permanent" side effects, including subsidence of the land exceeding 10 feet (3 metres) in extensive areas, and seawater intrusion that ended the useful lives of many wells along the coast and as much as 6 miles (10 kilometres) inland. Some problems have been solved, but these solutions have at times created other problems. Many ground-water reservoirs have gone through one or more stages - exploration for productive aquifers, exploitation and development for use of the water, restriction to the perennial supply or "safe" yield, importation of surface water, artificial recharge of ground water, conjunctive use of surface and ground water, protection of water quality, and integrated management of use and disposal of water. This evolutionary sequence is unique for each reservoir, and so generalizations become difficult in a regional appraisal; also, the changes with time are significant and varied, and knowledge of prior events is a prerequisite in an appraisal of the resource in a specific year. As of 1970, water levels in many wells had risen significantly from the minimum levels of record reached during the 1960's or earlier; only in areas of new development and in desert areas of long-continued "mining" of nonreplenished water was ground-water storage still being depleted. Land subsidence has continued at diminishing rates and practically has come to a halt in some areas; invading seawater has been stopped or nudged back in most places where problems were significant. The current, favorable situation has been helped by climatic variations, from drought in 1945-52 and exceedingly dry years in 1959 and 1961 to above-normal precipitation in 1969 and 1970; but most of the serious problems have been solved by human efforts, including especially the implementation of the California Water Plan, transporting water from areas of perennial surplus to areas where it is used in lieu of ground water or for ground-water replenishment. All major urban areas now import water to supplement or replace the water pumped from wells. Extensive agricultural areas that formerly were irrigated solely by ground water now obtain some of their water from surface reservoirs and canals, especially in the Central Valley. With surface water available as an alternative supply, well owners can view their ground water with complacency. But complacency can lead to neglect and carelessness and consequent deterioration of the ground-water resource by pollution. Claiming heritage from the English Common Law, the existing California law grants to the landowner (riparian) and private enterprise (appropriator) rights to the water stored in ground-water reservoirs or discharged from them, including the base flow of streams. Ground-water development has been by private and local enterprise, and the California legislature has protected and encouraged local responsibility, control, and management of ground water. As to surface water, a constitutional amendment in 1928 limited riparian rights to the quantities of water that were "reasonably required for the beneficial use to be served." The surpluses have become public waters which are collected, stored, transported, and delivered under various contracts by Federal, State, and other agencies. The agencies have not stored water underground because of uncertainty as to their rights, but some local agencies have been encouraged with favorable pricing schedules to undertake the artificial recharge and management of ground-water reservoirs. Thus, conjunctive use of surface and ground water has become a matter of interagency negotiation. Of all the constraints on effective use of ground-water reservoirs, the most formidable may be the attitudes of people. Assurance of water supply is vital in areas of water deficiency, and Government has assumed increasing responsibility for the welfare of people in these areas. Unfortunately, when Government provides this assurance, most beneficiaries demand continued subsidy to the exclusion of perhaps cheaper private development. Indeed, as the water resources are presently segregated-with private rights predominant in ground water and public interest dominant in surface water-ground-water development has suffered for lack of public concern. The region has the scientific and technologic capability for effective use of groundwater reservoirs, as shown by the achievements and programs of several districts, but many districts are not organized or staffed for such comprehensive management and will need assistance and scientific expertise available from State and Federal agencies. Those agencies, in turn, may not have the scientific data that are essential to prevent haphazard activities and to enable programs to be organized for the most effective and attractive utilization of the water resources. In these days of increasing concern over pollution, existing data are generally inadequate to assess the natural deterioration of ground waters as a basis for defining pollution.

California

Earthquake shaking and damage to buildings

Ground shaking close to the causative fault of an earthquake is more intense than it was previously believed to be. This raises the possibility that large numbers of buildings and other structures are not sufficiently resistant for the intense levels of shaking that can occur close to the fault. Many structures were built before earthquake codes were adopted; others were built according to codes formulated when less was known about the intensity of near-fault shaking. Although many building types are more resistant than conventional design analyses imply, the margin of safety is difficult to quantify. Many modern structures, such as freeways, have not been subjected to and tested by near-fault shaking in major earthquakes (magnitude 7 or greater). Damage patterns in recent moderate-sized earthquakes occurring in or adjacent to urbanized areas, however, indicate that many structures, including some modern ones designed to meet earthquake code requirements, cannot withstand the severe shaking that can occur close to a fault. It is necessary to review the ground motion assumed and the methods utilized in the design of important existing structures and, if necessary, to strengthen or modify the use of structures that are found to be weak. New structures situated close to active faults should be designed on the basis of ground motion estimates greater than those used in the past. The ultimate balance between risk of earthquake losses and cost for both remedial strengthening and improved earthquake-resistant construction must be decided by the public. Scientists and engineers must inform the public about earthquake shaking and its effect on structures. The exposure to damage from seismic shaking is steadily increasing because of continuing urbanization and the increasing complexity of lifeline systems, such as power, water, transportation, and communication systems. In the near future we should expect additional painful examples of the damage potential of moderate-sized earthquakes in urban areas. Over a longer time span, however, we can significantly reduce the risk to life and property from seismic shaking through better land utilization, improved building codes and construction practices, and at least the gradual replacement of poor buildings by more resistant buildings. Progress toward reducing risk from seismic shaking through better building design is slowed by deficiencies in our knowledge about the nature of damaging ground motion and the failure mechanisms in structures. For example, lacking observational data, seismologists must rely on simplified theoretical and numerical models of the earthquake process to estimate near-fault ground motion, especially for earthquakes as large as magnitude 7 and 8. Because such models have not been adequately tested against data, their reliability is unknown. Engineers lack detailed information about failure processes in structures during an earthquake. Although many structures have been instrumented to measure their response to an earthquake, few records have been obtained from buildings that actually sustained significant structural damage and few structures are properly instrumented to measure all the modes of deformation that are likely to contribute to failure. Moreover, the fact that many structures have withstood ground motion more intense than that assumed in their design indicates that conventional methods of design do not take into account important contributions to earthquake resistance by nonstructural elements and by the ability of structural elements to deform inelastically without necessarily causing failure of the structure. It is fortunate when such reserve resistance exists, but better understanding of the sources of reserve strength is needed to determine how large a margin of safety they confer and how they might be affected by changes in construction practices and materials with time. In the next few years we look forward to significant advances in knowledge and to more effective application of what is already known, largely because of substantial funding of research related to seismic engineering by the National Science Foundation . The increasing number of strong-motion seismographs operating in seismically active regions will likely provide for the first time a number of records of damaging levels of ground motion. Significant effort is being directed toward obtaining near-fault records, although many probable sites of future large earthquakes remain inadequately instrumented, especially outside the conterminous United States. New and more complete information on building response and damage mechanisms will be obtained by improved instrumentation of structures and through laboratory investigations of failure in structures and structural elements. Further developments in computer technology and in computer modeling techniques will permit more realistic simulations of the seismic response of soils and structures that take into account their inelastic behavior and their strain-dependent properties. Earthquake design codes will continually be revised to better utilize existing knowledge concerning the nature of strong ground motion and the dynamic behavior of buildings during earthquakes and to incorporate new knowledge and also experiences gained from future earthquakes. We believe that application of new knowledge, improvements in earthquake-resistant design and construction, and remedial strengthening or replacement of weak existing structures can significantly reduce our current level of exposure to earthquake hazards.

Science

Design and maintenance of a network for collecting high-resolution suspended-sediment data at remote locations on rivers, with examples from the Colorado River

Management of sand and finer sediment in fluvial settings has become increasingly important for reasons ranging from endangered-species habitat to transport of sediment-associated contaminants. In all rivers, some fraction of the suspended load is transported as washload, and some as suspended bed material. Typically, the washload is composed of silt-and-clay-size sediment, and the suspended bed material is composed of sand-size sediment. In most rivers, as a result of changes in the upstream supply of silt and clay, large, systematic changes in the concentration of the washload occur over time, independent of changes in water discharge. Recent work has shown that large, systematic, discharge-independent changes in the concentration of the suspended bed material are also present in many rivers. In bedrock canyon rivers, such as the Colorado River in Grand Canyon National Park, changes in the upstream tributary supply of sand may cause large changes in the grain-size distribution of the bed sand, resulting in changes in both the concentration and grain-size distribution of the sand in suspension. Large discharge-independent changes in suspended-sand concentration coupled to discharge-independent changes in the grain-size distribution of the suspended sand are not unique to bedrock canyon rivers, but also occur in large alluvial rivers, such as the Mississippi River. These systematic changes in either suspended-silt-and-clay concentration or suspended-sand concentration may not be detectable by using conventional equal-discharge- or equal-width-increment measurements, which may be too infrequently collected relative to the time scale over which these changes in the sediment load are occurring. Furthermore, because large discharge-independent changes in both suspended-silt-and-clay and suspended-sand concentration are possible in many rivers, methods using water discharge as a proxy for suspended-sediment concentration (such as sediment rating curves) may not produce sufficiently accurate estimates of sediment loads. Finally, conventional suspended-sediment measurements are both labor and cost intensive and may not be possible at the resolution required to resolve discharge-independent changes in suspended-sediment concentration, especially in more remote locations. For these reasons, the U.S. Geological Survey has pursued the use of surrogate technologies (such as acoustic and laser diffraction) for providing higher-resolution measurements of suspended-sediment concentration and grain size than are possible by using conventional suspended-sediment measurements alone. These factors prompted the U.S. Geological Survey's Grand Canyon Monitoring and Research Center to design and construct a network to automatically measure suspended-sediment transport at 15-minute intervals by using acoustic and laser-diffraction surrogate technologies at remote locations along the Colorado River within Marble and Grand Canyons in Grand Canyon National Park. Because of the remoteness of the Colorado River in this reach, this network also included the design of a broadband satellite-telemetry system to communicate with the instruments deployed at each station in this network. Although the sediment-transport monitoring network described in this report was developed for the Colorado River in Grand Canyon National Park, the design of this network can easily be adapted for use on other rivers, no matter how remote. In the Colorado River case-study example described in this report, suspended-sediment concentration and grain size are measured at five remote stations. At each of these stations, surrogate measurements of suspended-sediment concentration and grain size are made at 15-minute intervals using an array of different single-frequency acoustic-Doppler side-looking profilers. Laser-diffraction instruments are also used at two of these stations to measure both suspended-sediment concentrations and grain-size distributions. Cross-section calibrations of these instruments have been constructed and verified by using either equal-discharge-increment (EDI) or equal-width-increment (EWI) measurements of the velocity-weighted suspended-sediment concentration and grain-size distribution. The suspended-silt-and-clay concentration parts of these calibration relations have also included information from EDI- or EWI-calibrated samples collected by automatic pump samplers. Three of the monitoring stations are equipped with two-way satellite broadband telemetry systems that operate once a day to remotely monitor and program the instruments and download data. Data from these stations are typically downloaded twice per month; data from stations without satellite-telemetry systems are downloaded during site visits, which occur every 2 months or semiannually, depending on the remoteness of the site. Upon downloading and processing, suspended-silt-and-clay concentration, suspended-sand concentration, and suspended-sand median grain size are posted on the World Wide Web. Satellite telemetry in combination with the high-resolution sediment surrogate measurements can generate near-real-time suspended-sediment-concentration and grain-size data (limited only by the time required to download the instruments and process the data). The approach for measuring suspended-sediment concentration and grain size using this monitoring network is more practical, and can be done at a much lower cost and with higher temporal resolution, than any other method.

Arizona;Nevada;Utah

Continuous real-time water-quality monitoring and regression analysis to compute constituent concentrations and loads in the North Fork Ninnescah River upstream from Cheney Reservoir, south-central Kansas, 1999–2012

Cheney Reservoir, located in south-central Kansas, is the primary water supply for the city of Wichita. The U.S. Geological Survey has operated a continuous real-time water-quality monitoring station since 1998 on the North Fork Ninnescah River, the main source of inflow to Cheney Reservoir. Continuously measured water-quality physical properties include streamflow, specific conductance, pH, water temperature, dissolved oxygen, and turbidity. Discrete water-quality samples were collected during 1999 through 2009 and analyzed for sediment, nutrients, bacteria, and other water-quality constituents. Regression models were developed to establish relations between discretely sampled constituent concentrations and continuously measured physical properties to compute concentrations of those constituents of interest that are not easily measured in real time because of limitations in sensor technology and fiscal constraints. Regression models were published in 2006 that were based on data collected during 1997 through 2003. This report updates those models using discrete and continuous data collected during January 1999 through December 2009. Models also were developed for four new constituents, including additional nutrient species and indicator bacteria. In addition, a conversion factor of 0.68 was established to convert the Yellow Springs Instruments (YSI) model 6026 turbidity sensor measurements to the newer YSI model 6136 sensor at the North Ninnescah River upstream from Cheney Reservoir site. Newly developed models and 14 years of hourly continuously measured data were used to calculate selected constituent concentrations and loads during January 1999 through December 2012. The water-quality information in this report is important to the city of Wichita because it allows the concentrations of many potential pollutants of interest to Cheney Reservoir, including nutrients and sediment, to be estimated in real time and characterized over conditions and time scales that would not be possible otherwise. In general, model forms and the amount of variance explained by the models was similar between the original and updated models. The amount of variance explained by the updated models changed by 10 percent or less relative to the original models. Total nitrogen, nitrate, organic nitrogen, E. coli bacteria, and total organic carbon models were newly developed for this report. Additional data collection over a wider range of hydrological conditions facilitated the development of these models. The nitrate model is particularly important because it allows for comparison to Cheney Reservoir Task Force goals. Mean hourly computed total suspended solids concentration during 1999 through 2012 was 54 milligrams per liter (mg/L). The total suspended solids load during 1999 through 2012 was 174,031 tons. On an average annual basis, the Cheney Reservoir Task Force runoff (550 mg/L) and long-term (100 mg/L) total suspended solids goals were never exceeded, but the base flow goal was exceeded every year during 1999 through 2012. Mean hourly computed nitrate concentration was 1.08 mg/L during 1999 through 2012. The total nitrate load during 1999 through 2012 was 1,361 tons. On an annual average basis, the Cheney Reservoir Task Force runoff (6.60 mg/L) nitrate goal was never exceeded, the long-term goal (1.20 mg/L) was exceeded only in 2012, and the base flow goal of 0.25 mg/L was exceeded every year. Mean nitrate concentrations that were higher during base flow, rather than during runoff conditions, suggest that groundwater sources are the main contributors of nitrate to the North Fork Ninnescah River above Cheney Reservoir. Mean hourly computed phosphorus concentration was 0.14 mg/L during 1999 through 2012. The total phosphorus load during 1999 through 2012 was 328 tons. On an average annual basis, the Cheney Reservoir Task Force runoff goal of 0.40 mg/L for total phosphorus was exceeded in 2002, the year with the largest yearly mean turbidity, and the long-term goal (0.10 mg/L) was exceeded in every year except 2011 and 2012, the years with the smallest mean streamflows. The total phosphorus base flow goal of 0.05 mg/L was exceeded every year. Given that base flow goals for total suspended solids, nitrate, and total phosphorus were exceeded every year despite hydrologic conditions, the established base flow goals are either unattainable or substantially more best management practices will need to be implemented to attain them. On an annual average basis, no discernible patterns were evident in total suspended sediment, nitrate, and total phosphorus concentrations or loads over time, in large part because of hydrologic variability. However, more rigorous statistical analyses are required to evaluate temporal trends. A more rigorous analysis of temporal trends will allow evaluation of watershed investments in best management practices.

Kansas