SEARCH · Geology Reports

Results for “The Leading Edge”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5Linked to original sources

USGS2010

Observations at convergent margins concerning sediment subduction, subduction erosion, and the growth of continental crust

At ocean margins where two plates converge, the oceanic plate sinks or is subducted beneath an upper one topped by a layer of terrestrial crust. This crust is constructed of continental or island arc material. The subduction process either builds juvenile masses of terrestrial crust through arc volcanism or new areas of crust through the piling up of accretionary masses (prisms) of sedimentary deposits and fragments of thicker crustal bodies scraped off the subducting lower plate. At convergent margins, terrestrial material can also bypass the accretionary prism as a result of sediment subduction, and terrestrial matter can be removed from the upper plate by processes of subduction erosion. Sediment subduction occurs where sediment remains attached to the subducting oceanic plate and underthrusts the seaward position of the upper plate's resistive buttress (backstop) of consolidated sediment and rock. Sediment subduction occurs at two types of convergent margins: type 1 margins where accretionary prisms form and type 2 margins where little net accretion takes place. At type 2 margins (∼19,000 km in global length), effectively all incoming sediment is subducted beneath the massif of basement or framework rocks forming the landward trench slope. At accreting or type 1 margins, sediment subduction begins at the seaward position of an active buttress of consolidated accretionary material that accumulated in front of a starting or core buttress of framework rocks. Where small-to-medium-sized prisms have formed (∼16,300 km), approximately 20% of the incoming sediment is skimmed off a detachment surface or decollement and frontally accreted to the active buttress. The remaining 80% subducts beneath the buttress and may either underplate older parts of the frontal body or bypass the prism entirely and underthrust the leading edge of the margin's rock framework. At margins bordered by large prisms (∼8,200 km), roughly 70% of the incoming trench floor section is subducted beneath the frontal accretionary body and its active buttress. In rounded figures the contemporary rate of solid-volume sediment subduction at convergent ocean margins (∼43,500 km) is calculated to be 1.5 km³/yr. Correcting type 1 margins for high rates of terrigenous seafloor sedimentation during the past 30 m.y. or so sets the long-term rate of sediment subduction at 1.0 km³/yr. The bulk of the subducted material is derived directly or indirectly from continental denudation. Interstitial water currently expulsed from accreted and deeply subducted sediment and recycled to the ocean basins is estimated at 0.9 km³/yr. The thinning and truncation caused by subduction erosion of the margin's framework rock and overlying sedimentary deposits have been demonstrated at many convergent margins but only off northern Japan, central Peru, and northern Chile has sufficient information been collected to determine average or long-term rates, which range from 25 to 50 km³/m.y. per kilometer of margin. A conservative long-term rate applicable to many sectors of convergent margins is 30 km³/km/m.y. If applied to the length of type 2 margins, subduction erosion removes and transports approximately 0.6 km³/yr of upper plate material to greater depths. At various places, subduction erosion also affects sectors of type 1 margins bordered by small- to medium-sized accretionary prisms (for example, Japan and Peru), thus increasing the global rate by possibly 0.5 km³/yr to a total of 1.1 km³/yr. Little information is available to assess subduction erosion at margins bordered by large accretionary prisms. Mass balance calculations allow assessments to be made of the amount of subducted sediment that bypasses the prism and underthrusts the margin's rock framework. This subcrustally subducted sediment is estimated at 0.7 km³/yr. Combined with the range of terrestrial matter removed from the margin's rock framework by subduction erosion, the global volume of subcrustally subducted material is estimated to range from 1.3 to 1.8 km³/yr. Subcrustally subducted material is either returned to the terrestrial crust by arc-related igneous processes or crustal underplating or is lost from the crust by mantle absorption. Geochemical and isotopic data support the notion that upper mantle melting returns only a small percent of the subducted material to the terrestrial crust as arc igneous rocks. Limited areal exposures of terrestrial rocks metamorphosed at deep (>20–30 km) subcrustal pressures and temperatures imply that only a small fraction of subducted material is reattached via deep crustal underplating. Possibly, therefore much of the subducted terrestrial material is recycled to the mantle at a rate near 1.6 km³/yr, which is effectively equivalent to the commonly estimated rate at which the mantle adds juvenile igneous material to the Earth's layer of terrestrial rock.

Alaska↗

USGS2010

Mid‐Cretaceous extensional tectonics of the Yukon‐Tanana Terrane, Trans‐Alaska Crustal Transect (TACT), east‐central Alaska

Mid‐Cretaceous crustal extension played a fundamental role in the structural evolution of the Yukon‐Tanana terrane (YTT) in the northern Cordilleran interior. In the central portion of the YTT northwest of Delta Junction, Alaska, a mylonitic shear zone juxtaposes greenschist facies rocks in the upper plate against middle to upper amphibolite facies metamorphic rocks in the lower plate, a juxtaposition suggesting elimination of as much as 10 km of crustal section. The mylonites form a partial sheath enveloping a domal footwall structure and kinematic analysis of the mylonite zone yields a uniform transport direction of hanging wall to ESE. These relations suggest analogies to the metamorphic core complexes of the southern Cordillera. However, the YTT structures are entirely ductile, suggesting either a relatively deep erosional level or relatively high geothermal gradients during extension. In the study area remnants of an older preextensional thrusting event are preserved at the highest structural levels at the base of the Seventymile terrane and the leading edge of YTT in the Wickersham terrane. However, most areas display a regional, subhorizontal fabric that is superimposed on older fabrics, and in the study area this latest fabric is subparallel to the mylonitic sheath of the apparent extensional structure. Thus the conventional viewpoint that this latest fabric is related to thrusting needs to be reevaluated and this fabric may be entirely extensional in origin. Further evidence for extension is provided by clear similarities between YTT and characteristic features of other extensional terranes. Thus we suggest that the YTT is a deeply eroded view of highly extended continental crust. The tectonic mechanism for the extensional event and the magnitude of the extension is uncertain because of complications in regional timing relationships and in alternative interpretations of the reconstruction of the crustal section. Three end‐member models based on analogies with Neogene extensional systems are presented as working models to accommodate the alternative interpretations: (1) a Jurassic collision and Cretaceous extension model based on comparisons with the Neogene history of the Mediterranean region; (2) an Early to mid‐Cretaceous syncollisional model analogous to the Carpathian Mountains of eastern Europe; and (3) a syncollisional plateau uplift model with extension driven by gravity spreading.

Alaska↗

USGS2012

Stratigraphic contrasts and tectonic relationships between Carboniferous successions in the Trans-Alaska Crustal Transect corridor and adjacent areas, northern Alaska

The Carboniferous succession along the Trans-Alaska Crustal Transect (TACT) corridor in the Atigun Gorge area of the central Brooks Range consists of the Kayak Shale (Kinderhookian) and the Lisburne Group (Kinderhookian through Chesterian). The Kayak Shale is at least 210 m thick; it is chiefly black, noncalcareous shale with several limestone beds of pelmatozoan-bryozoan packstone and formed in an open-marine setting. The Lisburne Group is a carbonate rock succession about 650 m thick and consists mainly of skeletal packstone, wackestone, and milestone which contain locally abundant calcispheres, ostracodes, algae, and sponge spicules; it accumulated largely in a shallow water platform environment with restricted circulation. This restriction was probably produced by a coeval belt of skeletal sand shoals recognized 70 km to the west in the Shainin Lake area. Significant and apparently abrupt shifts in the age and lithofacies of Carboniferous strata occur across the central and eastern Brooks Range. These shifts are most marked in a zone roughly coincident with what is interpreted by many workers to be the leading edge of the Endicott Mountains allochthon. Notable lithologie contrasts are also observed, however, between sections in the northern and southern parts of the Endicott Mountains allochthon. This suggests that considerable tectonic shortening has taken place within the allochthon, as well as between it and parautochthonous rocks to the northeast. The Carboniferous section near Mount Doonerak is more similar in age and lithofacies to coeval sections in the central Brooks Range that are considered allochthonous than to parautochthonous sections to the northeast.

Journal of Geophysical Research B: Solid Earth↗

USGS2012

Terranes and suture zones in east central Alaska

East central Alaska, with its 17 terranes, forms a part of the mosaic of allochthonous terranes that join the North American and Siberian plates. These terranes range from continental and continental margin, such as the Tatonduk with its thick well-bedded succession of marine shelf rocks, to seamount, arc, and ocean floor terranes. The Yukon crystalline terrane, the largest described here, is a composite of at least four subterranes juxtaposed across the Tintina fault with the Tatonduk terrane, a northwestern extension of the North American plate in Alaska. Inboard of the Yukon crystalline terrane are packets of closely appressed microterranes separated from the Tatonduk and other terranes belonging to North America by major suture zones. These microterranes lie between North America and the mosaic of accretionary terranes that form the more southerly part of Alaska. The most obviously allochthonous microterranes within the suture zones are the Woodchopper Canyon, an Early Devonian basaltic seamount, and the White Mountains, an Ordovician volcanic arc terrane capped by Silurian and Devonian carbonate bank deposits. The nearest counterpart of these terranes is the Alexander terrane in southeastern Alaska. The Tintina fault of Mesozoic and Cenozoic age, like the Denali fault, primarily follows old suture zones that separate terranes. Strike slip faulting developed after collision in places where further convergence was oblique to the terrane margins. Where terranes met head-on, their leading edges lie along a multiple set of high-angle faults that outline microterranes in accretion zones.

Alaska↗

USGS2024

Silver carp experience metabolic and behavioral changes when exposed to water from the Chicago Area Waterway

One of the hallmarks of invasive species is their propensity to spread. Removing an invasive species after establishment is virtually impossible, and so considerable effort is invested in preventing the range expansion of invaders. Silver carp ( Hypophthalmichthys molitrix) were discovered in the Mississippi River in 1981 and have spread throughout the basin. Despite their propensity to expand, the ‘leading edge’ in the Illinois River has stalled south of Chicago and has remained stable for a decade. Studies have indicated that contaminants in the Chicago Area Waterway System (CAWS) may be contributing to the lack of upstream movement, but this hypothesis has not been tested. This study used a laboratory setting to quantify the role of contaminants in deterring upstream movement of silver carp within the CAWS. For this, water was collected from the CAWS near the upstream edge of the distribution and transported to a fish culture facility. Silver carp and one native species were exposed to CAWS water, and activity, behavior, avoidance, and metabolic rates were quantified. Results showed that silver carp experience an elevated metabolic cost in CAWS water, along with reductions in swimming behavior. Together, results indicate a role for components of CAWS water at deterring range expansion.

Scientific Reports↗

USGS1997

Predicting travel time and dispersion in rivers and streams

The possibility of a contaminant being accidentally or intentionally spilled in a river is a constant concern to those using the water. Methods are developed to estimate: (1) the velocity of a contaminant in a river; (2) the rate of attenuation of the peak concentration of a conservative contaminant; and (3) the time required for a contaminant plume to pass a point. The methods are based on data collected by the U.S. Geological Survey in almost a hundred different rivers representing a wide range of sizes, slopes, and geomorphic types. Although the accuracy of the predictions can be greatly increased by performing time-of-travel studies, the emphasis of this paper is on providing methods for making estimates where few data are available. It is shown that the unit-peak concentration is well correlated with travel time and that the travel time of the leading edge averages 89% of the travel time of the peak concentration.

Journal of Hydraulic Engineering↗

USGS2012

Field-based evaluations of horizontal flat-plate fish screens, II: Testing of a unique off-stream channel device - The Farmers Screen

Screens are installed at water diversion sites to reduce entrainment of fish. Recently, the Farmers Irrigation District (Oregon) developed a unique flat-plate screen (the “Farmers Screen”) that operates passively and may offer reduced installation and operating costs. To evaluate the effectiveness of this screen on fish, we conducted two separate field experiments. First, juvenile coho salmon Oncorhynchus kisutch were released over a working version of this screen under a range of inflows (0.02–0.42 m 3 /s) and diversion flows (0.02–0.34 m 3 /s) at different water depths. Mean approach velocities ranged from 0 to 5 cm/s and sweeping velocities ranged from 36 to 178 cm/s. Water depths over the screen surface ranged from 1 to 25 cm and were directly related to inflow. Passage of fish over the screen under these conditions did not severely injure them or cause delayed mortality, and no fish were observed becoming impinged on the screen surface. Second, juvenile coho salmon and steelhead O. mykiss were released at the upstream end of a 34-m flume and allowed to volitionally move downstream and pass over a 3.5-m section of the Farmers Screen to determine whether fish would refuse to pass over the screen after encountering its leading edge. For coho salmon, 75–95% of the fish passed over the screen within 5 min and 82–98% passed within 20 min, depending on hydraulic conditions. For steelhead, 47–90% of the fish passed over the screen within 5 min and 79–95% passed within 20 min. Our results indicate that when operated within its design criteria, the Farmers Screen provides safe and efficient downstream passage of juvenile salmonids under a variety of hydraulic conditions.

North American Journal of Fisheries Management↗

USGS1999

Ten years of studies on Maryland's inner Continental Margin and coastal bays

During the past ten years of the Association of American State Geologists-Mineral Management Service Continental Margins Program, the Maryland Geological Survey investigated the sedimentological, paleontological, stratigraphical and geophysical character of Maryland's inner continental shelf. Based on seismic records and sedimentological analyses completed during the first four years, a late Quaternary stratigraphic model was developed. Five distinct stratigraphic units were identified and described on the Maryland inner shelf. These units represent late Pleistocene interglacial deposits, the oldest of which corresponds to pre-Illinoian (oxygen-isotope stages 7 and/or 9) transgressive shelf sands. Overlying the Q1 unit, the Q2 unit is a 6-meter thick mud sequence of oxygen-isotope stage 5 (128-75 ka) age. Units Q3 and Q4 representing fluvial and leading edge estuarine deposits (oxygen-isotope stages 4, 3 and 2) filled numerous paleochannels that were incised into units Q2 and Q1. Modern trailing-edge transgressive shelf shoals (Unit Q5) discontinuously cap the sequence. The 5th and 6th years studies reported on the economic minerals of surficial and cored sediments. Vibracores collected off the Maryland's shelf during previous studies were analyzed for mineral types and abundances, weight percent of general size fractions, and heavy mineral (HM) content. Mineralogic maturity indices were compiled to correlate the THM and economic heavy minerals (EHM) abundances with position offshore, sediment type, and the indices themselves. For the 7th year, the Maryland Geological Survey re-examined geophysical records and lithological data originally collected by the Army Corps of Engineers to locate and assess beach fill borrow areas for the Ocean City Beach Replenishment Project. Data from 163 vibracores and over 300 kilometers of high-resolution seismic profile records collected off Ocean City, Maryland, supported the stratigraphic model developed by MGS during the first four years of the AASG-MMS program. The Maryland coastal bays became the focus of study during the 8th and 9th years during which seismic records, cores and surficial sediment were collected in Isle of Wight and Assawoman Bays. Shallow pretransgression surface was mapped, relating the existing streams to offshore paleochannels. The tenth year study focused on developing a repository for vibracores collected on Maryland's inner continental shelf.During the past ten years of the Association of American State Geologists-Mineral Management Service Continental Margins Program, the Maryland Geological Survey investigated the sedimentological, paleontological, stratigraphical and geophysical character of Maryland's inner continental shelf. Based on seismic records and sedimentological analysis completed during the first four years, a late quaternary stratigraphic model was developed. Five distinct stratigraphic units were identified and described on the Maryland inner shelf. These units represent late Pleistocene interglacial deposits, the oldest of which corresponds to pre-Illinoian transgressive shelf sands.

Marine Georesources and Geotechnology↗

USGS1991

Isotopic and chemical evidence concerning the genesis and contamination of basaltic and rhyolitic magma beneath the Yellowstone Plateau Volcanic Field

Since 2.2 Ma, the Yellowstone Plateau volcanic field has produced ∼6000 km 3 of rhyolite tuffs and lavas in >60 separate eruptions, as well as ∼ 100 km 3 of tholeiitic basalt from >50 vents peripheral to the silicic focus. Intermediate eruptive products are absent. Large calderas collapsed at 2·0, 1·3, and 0·6 Ma on eruption of ash-flow sheets representing at least 2500, 280, and 1000 km 3 of zoned magma. Early postcollapse rhyolites show large shifts in Nd, Sr, Pb, and O isotopic compositions caused by assimilation of roof rocks and hydrothermal brines during collapse and resurgence. Younger intracaldera rhyolite lavas record partial isotopic recovery toward precaldera ration. Thirteen extracaldera rhyolites show none of these effects and have sources independent of the subcaldera magma system. Contributions from the Archaean crust have extreme values and wide ranges of Nd-, Sr-, and Pb-isotope ratios, but Yellowstone rhyolites have moderate values and limited ranges. This requires their deep-crustal sources to have been pervasively hybridized (and the Archaean components diluted) by distributed intrusion of Cenozoic basalt, most of which was probably contemporaneous with the Pliocene and Qualernary volcanism. In hybrid sources yielding magmas parental to the subcaldera rhyolites, half or more of the Nd and Sr may have been contributed by such young basalt. Parents for the extracaldera rhyolites, generated beyond the leading edge of the northeast-propagating focus of basaltic intrusion and deep-crustal mobilization, contained smaller fractions of mantle-derived components.

Journal of Petrology↗

USGS2016

Demographic mechanisms underpinning genetic assimilation of remnant groups of a large carnivore

Current range expansions of large terrestrial carnivores are occurring following human-induced range contraction. Contractions are often incomplete, leaving small remnant groups in refugia throughout the former range. Little is known about the underlying ecological and evolutionary processes that influence how remnant groups are affected during range expansion. We used data from a spatially explicit, long-term genetic sampling effort of grizzly bears ( Ursus arctos ) in the Northern Continental Divide Ecosystem (NCDE), USA, to identify the demographic processes underlying spatial and temporal patterns of genetic diversity. We conducted parentage analysis to evaluate how reproductive success and dispersal contribute to spatio-temporal patterns of genetic diversity in remnant groups of grizzly bears existing in the southwestern (SW), southeastern (SE) and east-central (EC) regions of the NCDE. A few reproductively dominant individuals and local inbreeding caused low genetic diversity in peripheral regions that may have persisted for multiple generations before eroding rapidly (approx. one generation) during population expansion. Our results highlight that individual-level genetic and reproductive dynamics play critical roles during genetic assimilation, and show that spatial patterns of genetic diversity on the leading edge of an expansion may result from historical demographic patterns that are highly ephemeral.

Northern Continental Divide Ecosystem↗

USGS2020

Seasonal habitat use indicates that depth may mediate the potential for invasive round goby impacts in inland lakes

The round goby ( Neogobius melanostomus ) is among the fastest-spreading introduced aquatic species in North America and is radiating inland from the Great Lakes into freshwater ecosystems across the landscape. Predicting and managing the impacts of round gobies requires information on the factors influencing their distribution in habitats along the invasion front, yet this information is not available for many recently invaded ecosystems. We evaluated the seasonal habitat use and biomass of round gobies in an inland temperate lake to define the spatiotemporal scope of biological interactions at the leading edge of the round goby invasion. Using novel statistical approaches, we combined hierarchical models that control for imperfect species detection with flexible smooth terms to describe non-linear relationships between round goby abundance and environmental gradients. Subsequently, we generated accurate detection-corrected estimates of the standing stock biomass of round gobies. Our results show seasonally differentiated habitat niches, where suitable round goby habitat in summer months is restricted to shallow depths (<18.4 m) with a mixture of vegetative and mussel cover. We found high round goby biomass of 122 kg/ha in occupied habitats during the summer, with a total lake-wide biomass of 766,000 kg. In winter, round gobies migrate to deep offshore habitats and disperse, dramatically altering their scope for biological interactions with resident aquatic species across summer and winter seasons. The results of this study indicate that the scope of biological interactions in inland lakes may be seasonally variable, with potential for high round goby biomass in shallow lakes or at the periphery of deep lakes in the summer months. Such shallow-water habitats may therefore present higher risk of ecological impacts from round gobies in invaded lentic ecosystems. As round gobies expand inland, consideration of seasonal habitat use will be an important factor in predicting the impacts of this pervasive invader.

New York↗

USGS2015

Arsenic cycling in hydrocarbon plumes: secondary effects of natural attenuation

Monitored natural attenuation is widely applied as a remediation strategy at hydrocarbon spill sites. Natural attenuation relies on biodegradation of hydrocarbons coupled with reduction of electron acceptors, including solid phase ferric iron (Fe(III)). Because arsenic (As) adsorbs to Fe-hydroxides, a potential secondary effect of natural attenuation of hydrocarbons coupled with Fe(III) reduction is a release of naturally occurring As to groundwater. At a crude-oil-contaminated aquifer near Bemidji, Minnesota, anaerobic biodegradation of hydrocarbons coupled to Fe(III) reduction has been well documented. We collected groundwater samples at the site annually from 2009 to 2013 to examine if As is released to groundwater and, if so, to document relationships between As and Fe inside and outside of the dissolved hydrocarbon plume. Arsenic concentrations in groundwater in the plume reached 230 µg/L, whereas groundwater outside the plume contained less than 5 µg/L As. Combined with previous data from the Bemidji site, our results suggest that (1) naturally occurring As is associated with Fe-hydroxides present in the glacially derived aquifer sediments; (2) introduction of hydrocarbons results in reduction of Fe-hydroxides, releasing As and Fe to groundwater; (3) at the leading edge of the plume, As and Fe are removed from groundwater and retained on sediments; and (4) downgradient from the plume, patterns of As and Fe in groundwater are similar to background. We develop a conceptual model of secondary As release due to natural attenuation of hydrocarbons that can be applied to other sites where an influx of biodegradable organic carbon promotes Fe(III) reduction.

Minnesota↗

USGS2006

Subsurface imaging of an abandoned solid waste landfill site in Norman, Oklahoma

Leachate plume emanating from an old unlined municipal landfill site near the city of Norman, Oklahoma, is discharging into the underlying alluvial aquifer. Subsurface imaging techniques, electrical resistivity tomography and electrical conductivity (EC) logging, were used on the site to detect and map the position of the leachate plume. Anomalous EC zones, delineated with the two methods, correlated with the occurrence of the plume detected by water chemistry analyses from multilevel monitoring wells. Specific conductance, a potential indicator of leachate contamination, ranged from 1861 to 7710 μS/cm in contaminated zones and from 465 to 2180 μS/cm in uncontaminated ground water. Results are in agreement with those from earlier studies that the leachate plume emerges from the landfill along preferential pathways. Additionally, there are indications that the leading edge of the plume has migrated, at least, 200 m away from the landfill in the direction of ground water flow.

Ground Water Monitoring and Remediation↗

USGS2025

Long-term dynamics of earthquake swarms in the Yellowstone caldera

The factors controlling the spatial distribution and temporal evolution of earthquake swarms in volcanic systems remain unclear. We leverage leading-edge deep learning algorithms and a detailed three-dimensional velocity model to construct a 15-year high-resolution earthquake catalog of the Yellowstone caldera region. More than half of the region’s earthquakes are clustered into swarm-like families characterized by episodes of hypocenter expansion and migration. Adjacent earthquake swarms, separated by long quiescent periods, are found to be a dominant feature. We suggest that these swarms are controlled by the interplay between slowly diffusing aqueous fluids and rapid episodic fluid injections, which may result from the breaking of permeability seals. Our analyses also indicate that clustered seismicity beneath the caldera occurs on relatively immature, rougher fault structures, compared to more planar faults outside. Our results provide additional context for understanding seismicity in hydrothermal systems, highlighting the key role played by long-term fluid diffusion processes in driving the occurrence of earthquake swarms.

Idaho, Montana, Wyoming↗

USGS1989

The structural geometry and evolution of foreland thrust systems, northern Virginia

Seismic reflection data reveal that the structural geometry of the central Appalachians of northern Virginia consists of three distinct thrust systems. Each thrust system is characterized by a unique internal geometry.The Blue Ridge thrust sheet is a composite thrust sheet composed primarily of imbricated Precambrian crystalline rocks. It over-rode Cambrian-Ordovician carbonates and formed a sheared, basement-cored fault-bend fold. Thrusts within the sheet may be Taconic and earliest Alleghanian, whereas final thrusting and emplacement of the sheet were probably slightly younger but still early Alleghanian. The North Mountain thrust sheet is characterized by imbricated Cambrian-Ordovician carbonates that are deformed into large-amplitude mode II fault-bend folds and fault-propagation folds. Rocks of this sheet were transported more than 60 km across a similar section of carbonates. The leading edge of the North Mountain thrust sheet was deformed into a fold with a mode II fault-bend fold geometry and was juxtaposed against middle Paleozoic rocks. The middle Paleozoic rocks occur in a ramp across which displacement along the North Mountain thrust was transferred to a higher detachment. More than 60 km of cover rocks displaced during the emplacement of the North Mountain thrust sheet either were transported across this ramp and thrust over a similar section in the western Valley and Ridge province or were backthrust above the sheet. The timing for imbrication and emplacement of the North Mountain thrust sheet is probably Main Phase Alleghanian. The Lower Carbonate duplex extends from beneath the Blue Ridge and North Mountain thrust sheets, westward across the western Valley and Ridge province. The Lower Carbonate duplex is characterized by imbricated Cambrian-Ordovician carbonates that form low-amplitude fault-bend folds. This thrust system also probably formed during Main Phase Alleghanian deformation.

Virginia↗

USGS1990

The Denali fault system and Alaska Range of Alaska: Evidence for underplated Mesozoic flysch from magnetotelluric surveys

Regional magnetotelluric surveys recently completed across the central and eastern Alaska Range of Alaska provide evidence for large volumes of conductive rocks beneath the core of the range. These conductive rocks may represent a formerly extensive, but now collapsed, Mesozoic flysch basin formed on the leading edge of the Talkeetna superterrane (amalgamated Wrangellia, Peninsular, and Alexander terranes). The docking of the Talkeetna superterrane caused large-scale oblique thrusting, folding, and metamorphism in the flysch basin, and formation of a megasuture along which the Cenozoic strike-slip Denali fault system developed. The deep magnetotelluric soundings and seismic reflection data suggest the possibility that the highly conductive rocks were tectonically emplaced beneath the thin crystalline sheet constituting the southern Yukon-Tanana terrane over a broad region of the Alaska Range. The conductive rocks are locally correlated with surface outcrops of Mesozoic black shales that are part of Upper Jurassic and Cretaceous flysch but may be composed of Paleozoic carbonaceous shales as well. In either case, their extremely low resistivities make them a valuable marker horizon for tectonic studies. The conductive rocks are interpreted to extend to depths of greater than 20 km and were mapped north and northeast of the Denali fault for more than 50 km. The magnetotelluric surveys represent the first large-scale surveys done in Alaska, but the structures mapped are similar to those observed in large, compressed flysch basins in the eastern Alps and Carpathian Mountains of Europe. The results of these surveys bear on several key tectonic questions, including development of the ancestral Denali fault, and collapse and possible underplating of an extensive Mesozoic flysch system and associated igneous arc.

Alaska↗

USGS1999

Debris-flow deposition: Effects of pore-fluid pressure and friction concentrated at flow margins

Measurements of pore-fluid pressure and total bed-normal stress at the base of several ∼10 m 3 experimental debris flows provide new insight into the process of debris-flow deposition. Pore-fluid pressures nearly sufficient to cause liquefaction were developed and maintained during flow mobilization and acceleration, persisted in debris-flow interiors during flow deceleration and deposition, and dissipated significantly only during postdepositional sediment consolidation. In contrast, leading edges of debris flows exhibited little or no positive pore-fluid pressure. Deposition therefore resulted from grain-contact friction and bed friction concentrated at flow margins. This finding contradicts models that invoke widespread decay of excess pore-fluid pressure, uniform viscoplastic yield strength, or pervasive grain-collision stresses to explain debris-flow deposition. Furthermore, the finding demonstrates that deposit thickness cannot be used to infer the strength of flowing debris.

Geological Society of America Bulletin↗

USGS2001

Possible giant metamorphic core complex at the center of Artemis Corona, Venus

Hundreds of circular features on Venus known as coronae are characterized by annular fractures and commonly associated radial fractures and lava flows. Coronae are thought to have been produced by buoyant mantle diapirs that flatten and spread at the base of the lithosphere and cause fracturing, uplift, and magmatism. The interior of Artemis Corona, by far the largest corona at 2100 km diameter, is divided in half by a northeast-trending deformation belt that contains numerous rounded ridges resembling antiforms. The largest of these ridges, located at the center of Artemis Corona, is ∼5 km high on its steep northwest flank where it is adjacent to a flat-bottomed, 10-km-wide trough interpreted as a rift valley. The 280-km-long antiformal ridge is marked by perpendicular grooves that cross the ∼50-km-wide ridge and extend southeastward as far as 120 km across adjacent plains. The grooves abruptly terminate northwestward at the rift trough. The large antiformal ridge terminates southwestward at a transform shear zone that parallels the grooves. These features—rift valley, antiformal uplift, grooves, and transform shear zone—are morphologically and geometrically similar to grooved, elevated, submarine metamorphic core complexes on the inside corners of ridge-transform intersections of slow-spreading ridges on Earth. As with submarine core complexes, the grooved surface on Venus is interpreted as the footwall of a large-displacement normal fault, and the grooves are inferred to be the product of plastic molding of the footwall to irregularities on the underside of the hanging wall followed by tectonic exhumation of the molded grooves and conveyer-belt–like transport up and over the large antiform and across the southeastern plains. According to this interpretation, the trend of the grooves records the direction of extension, which is perpendicular to the thrusts at the leading edge of the annular thrust belt 1000 km to the southeast. Both may have formed at the same time as a result of uniform southeastward displacement of the southeastern half of the interior of Artemis Corona. The location of this grooved core complex at the center of Artemis Corona may reflect genesis above the buoyant, ascending tail of the corona-producing mantle diapir.

Geological Society of America Bulletin↗