Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Physics Today”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

87 records · Page 5Linked to original sources
USGS2010

River-corridor habitat dynamics, Lower Missouri River

Intensive management of the Missouri River for navigation, flood control, and power generation has resulted in substantial physical changes to the river corridor. Historically, the Missouri River was characterized by a shifting, multithread channel and abundant unvegetated sandbars. The shifting channel provided a wide variety of hydraulic environments and large areas of connected and unconnected off-channel water bodies. Beginning in the early 1800s and continuing to the present, the channel of the Lower Missouri River (downstream from Sioux City, Iowa) has been trained into a fast, deep, single-thread channel to stabilize banks and maintain commercial navigation. Wing dikes now concentrate the flow, and revetments and levees keep the channel in place and disconnect it from the flood plain. In addition, reservoir regulation of the Missouri River upstream of Yankton, South Dakota, has substantially changed the annual hydrograph, sediment loads, temperature regime, and nutrient budgets. While changes to the Missouri River have resulted in broad social and economic benefits, they have also been associated with loss of river-corridor habitats and diminished populations of native fish and wildlife species. Today, Missouri River stakeholders are seeking ways to restore some natural ecosystem benefits of the Lower Missouri River without compromising traditional economic uses of the river and flood plain.

Fact Sheet↗
USGS2011

Well log characterization of natural gas hydrates

In the last 25 years we have seen significant advancements in the use of downhole well logging tools to acquire detailed information on the occurrence of gas hydrate in nature: From an early start of using wireline electrical resistivity and acoustic logs to identify gas hydrate occurrences in wells drilled in Arctic permafrost environments to today where wireline and advanced logging-while-drilling tools are routinely used to examine the petrophysical nature of gas hydrate reservoirs and the distribution and concentration of gas hydrates within various complex reservoir systems. The most established and well known use of downhole log data in gas hydrate research is the use of electrical resistivity and acoustic velocity data (both compressional- and shear-wave data) to make estimates of gas hydrate content (i.e., reservoir saturations) in various sediment types and geologic settings. New downhole logging tools designed to make directionally oriented acoustic and propagation resistivity log measurements have provided the data needed to analyze the acoustic and electrical anisotropic properties of both highly inter-bedded and fracture dominated gas hydrate reservoirs. Advancements in nuclear-magnetic-resonance (NMR) logging and wireline formation testing have also allowed for the characterization of gas hydrate at the pore scale. Integrated NMR and formation testing studies from northern Canada and Alaska have yielded valuable insight into how gas hydrates are physically distributed in sediments and the occurrence and nature of pore fluids (i.e., free-water along with clay and capillary bound water) in gas-hydrate-bearing reservoirs. Information on the distribution of gas hydrate at the pore scale has provided invaluable insight on the mechanisms controlling the formation and occurrence of gas hydrate in nature along with data on gas hydrate reservoir properties (i.e., permeabilities) needed to accurately predict gas production rates for various gas hydrate production schemes.

Conference Paper↗
USGS2007

Thermal Methods for Investigating Ground-Water Recharge

Recharge of aquifers within arid and semiarid environments is defined as the downward flux of water across the regional water table. The introduction of recharging water at the land surface can occur at discreet locations, such as in stream channels, or be distributed over the landscape, such as across broad interarroyo areas within an alluvial ground-water basin. The occurrence of recharge at discreet locations is referred to as focused recharge, whereas the occurrence of recharge over broad regions is referred to as diffuse recharge. The primary interest of this appendix is focused recharge, but regardless of the type of recharge, estimation of downward fluxes is essential to its quantification. Like chemical tracers, heat can come from natural sources or be intentionally introduced to infer transport properties and aquifer recharge. The admission and redistribution of heat from natural processes such as insolation, infiltration, and geothermal activity can be used to quantify subsurface flow regimes. Heat is well suited as a ground-water tracer because it provides a naturally present dynamic signal and is relatively harmless over a useful range of induced perturbations. Thermal methods have proven valuable for recharge investigations for several reasons. First, theoretical descriptions of coupled water-and-heat transport are available for the hydrologic processes most often encountered in practice. These include land-surface mechanisms such as radiant heating from the sun, radiant cooling into space, and evapotranspiration, in addition to the advective and conductive mechanisms that usually dominate at depth. Second, temperature is theoretically well defined and readily measured. Third, thermal methods for depths ranging from the land surface to depths of hundreds of meters are based on similar physical principles. Fourth, numerical codes for simulating heat and water transport have become increasingly reliable and widely available. Direct measurement of water flux in the subsurface is difficult, prompting investigators to pursue indirect methods. Geophysical approaches that exploit the coupled relation between heat and water transport provide an attractive class of methods that have become widely used in investigations of recharge. This appendix reviews the application of heat to the problem of recharge estimation. Its objective is to provide a fairly complete account of the theoretical underpinnings together with a comprehensive review of thermal methods in practice. Investigators began using subsurface temperatures to delineate recharge areas and infer directions of ground-water flow around the turn of the 20th century. During the 1960s, analytical and numerical solutions for simplified heat- and fluid-flow problems became available. These early solutions, though one-dimensional and otherwise restricted, provided a strong impetus for applying thermal methods to problems of liquid and vapor movement in systems ranging from soils to geothermal reservoirs. Today?s combination of fast processors, massive data-storage units, and efficient matrix techniques provide numerical solutions to complex, three-dimensional transport problems. These approaches allow researchers to take advantage of the considerable information content routinely achievable in high-accuracy temperature work.

Professional Paper↗
USGS1996

Quality of ground water and surface water in intermontane basins of the northern Rocky Mountains, Montana and Idaho

The Regional Aquifer-System Analysis (RASA) program is a series of studies by the U.S. Geological Survey (USGS) to analyze regional ground-water systems that compose a major portion of the Nations water supply (Sun, 1986). The Northern Rocky Mountains Intermontane Basins is one of the study regions in this national program. The main objectives of the RASA studies are to: (1) describe the ground-water systems as they exist today, (2) analyze the known changes that have led to the system's present condition, (3) combine results of previous studies in a regional analysis, where possible, and (4) provide means by which effects of future ground-water development can be estimated. The purpose of this study, which began in 1990, was to increase understanding of the hydrogeology of the intermontane basins of the Northern Rocky Mountains area. This report is Chapter C of a three-part series and describes the quality of ground water and surface water in the study area. Chapter A (Tuck and others, 1996) describes the geologic history and generalized hydrogeologic units. Chapter B (Briar and others, 1996) describes the general distribution of ground-water levels in basin-fill deposits. Water-quality data illustrated in this report represent the distribution of concentrations and composition of dissolved solids in ground water and surface water in the intermontane areas. The chemistry of ground and surface water in the intermontane areas is influenced by the chemical and physical nature of the rocks in the basin deposits of the valleys and surrounding bedrock in the mountains.

Hydrologic Atlas↗
USGS1999

Does Europa have a subsurface ocean? Evaluation of the geological evidence

It has been proposed that Jupiter's satellite Europa currently possesses a global subsurface ocean of liquid water. Galileo gravity data verify that the satellite is differentiated into an outer H 2 O layer about 100 km thick but cannot determine the current physical state of this layer (liquid or solid). Here we summarize the geological evidence regarding an extant subsurface ocean, concentrating on Galileo imaging data. We describe and assess nine pertinent lines of geological evidence: impact morphologies, lenticulae, cryovolcanic features, pull‐apart bands, chaos, ridges, surface frosts, topography, and global tectonics. An internal ocean would be a simple and comprehensive explanation for a broad range of observations; however, we cannot rule out the possibility that all of the surface morphologies could be due to processes in warm, soft ice with only localized or partial melting. Two different models of impact flux imply very different surface ages for Europa; the model favored here indicates an average age of ∼50 Myr. Searches for evidence of current geological activity on Europa, such as plumes or surface changes, have yielded negative results to date. The current existence of a global subsurface ocean, while attractive in explaining the observations, remains inconclusive. Future geophysical measurements are essential to determine conclusively whether or not there is a liquid water ocean within Europa today.

Journal of Geophysical Research: Planets↗
USGS2006

The 1906 earthquake and a century of progress in understanding earthquakes and their hazards

The 18 April 1906 San Francisco earthquake killed nearly 3000 people and left 225,000 residents homeless. Three days after the earthquake, an eight-person Earthquake Investigation Commission composed of 25 geologists, seismologists, geodesists, biologists and engineers, as well as some 300 others started work under the supervision of Andrew Lawson to collect and document physical phenomena related to the quake . On 31 May 1906, the commission published a preliminary 17-page report titled "The Report of the State Earthquake Investigation Commission". The report included the bulk of the geological and morphological descriptions of the faulting, detailed reports on shaking intensity, as well as an impressive atlas of 40 oversized maps and folios. Nearly 100 years after its publication, the Commission Report remains a model for post-earthquake investigations. Because the diverse data sets were so complete and carefully documented, researchers continue to apply modern analysis techniques to learn from the 1906 earthquake. While the earthquake marked a seminal event in the history of California, it served as impetus for the birth of modern earthquake science in the United States.

GSA Today↗
USGS1990

Role of heat and detachment in continental extension as viewed from the eastern basin and range province in Arizona

The Bill Williams River area of west-central Arizona includes not only the Rawhide-Buckskin metamorphic core complex, which is part of the lower Colorado River highly extended terrane (HET), but also the boundary between the extended terranes of the Basin and Range Province and the less deformed Arizona Transition Zone/Colorado Plateau. This provides important constraints on models that address the mechanisms for the mid- to late Tertiary deformation. Three phases of extension are present. The oldest is the extension associated with core-complex tectonism, which characteristically shows a lower plate composed of lineated mylonitic gneiss overlain by a detachment fault that is regionally nearly horizontal but undulates at the local scale. The fault in turn is overlain by an upper plate that includes Precambrian basement rocks, recrystallized Paleozoic sedimentary rocks, Mesozoic(?) metasedimentary and metavolcanic rocks of greenschist facies, and unaltered to hydrothermally altered syntectonic sedimentary and volcanic rocks of Miocene age. The upper plate is cut by closely spaced faults of modest structural relief that strike northwest and strongly rotate intervening blocks to face southwest. Most of these faults do not penetrate below the detachment fault. Fault spacing increases, and rotation decreases, to the northeast, away from the trace of the detachment. The second phase consists of “classic” Basin-Range high-angle normal faults that strike about north and have wide spacing, high structural relief, and modest rotation of blocks. These faults have no consistent direction of displacement and so produced horst and graben that form the ranges and basins visible today. This phase is locally superposed on Phase I, and also extends in more subdued form into the Transition Zone/Colorado Plateau. The third phase consists of tectonic quiescence and is present everywhere except parts of the Transition Zone that are still active seismically. The first phase occurred in the early and middle Miocene and was accompanied by deposition of syntectonic fluviolacustrine rocks (Suite I); the second (middle to late Miocene) was marked by interior-basin deposits (Suite II); the third (latest Miocene through Quaternary) is characterized by deposits related to through-flowing drainage. The phases grade into each other and thus are likely to be genetically related. Tectonic models must take into account not only the geographic distribution of deformation at any one time but also the time-dependent succession of deformation at any one place. A model proposed in this paper attempts to do this. The model is thermotectonic. A heating event in the lower crust, (basaltic intrusion, asthenospheric upwelling) combined with stretching, causes a sharp thermal front to rise within the crust. Embedded within the front is an “isotherm” that marks the brittle-ductile transition. As the front rises, it leaves behind a trail of shear zones, each marking a locus of preferred failure defined by mechanical or physical properties, or combinations thereof. The highest shear zone, now preserved in fossil form as the “detachment”, occurs where the front impinges on the meteoric groundwater, a few km below the topographic surface. The water steepens the thermal gradient at the front, which it stabilizes. A convective hydrothermal circulation system is established, causing alteration and mineralization above the ductile-brittle transition, as well as pore overpressure that results in hydrofracturing (producing monolithologic breccias) and the sliding of gravity-glide sheets. During these events, extension is taking place by brittle failure in the upper plate and ductile deformation below the detachment. Simultaneously, the hottest areas (core complexes) are updomed, promoting drainage reversals and the sliding of breccias and glide sheets. All this occurred only in the hottest areas or “blisters”, now marked by the core complexes. Distal areas showed less or no deformation at the surface. With time and the waning of the thermal event, the thermal front, and thus the brittle-ductile transition, smoothed out and sank, again leaving a trail of shear zones. Phase 1 deformation ceased and was replaced by Phase 2 deformation that occurred over a much wider area. Eventually, the front sank so deep that surface deformation ceased. This illustrates how the style of deformation at the surface may be a measure of the depth to the brittle-ductile transition. According to the thermotectonic model, extensional strain does not need to be constant along the detachment, in contrast to models involving simple shear through crustal-scale normal faults. On the contrary, one would expect strain to vary geographically as a function of maximum temperature attained, because of the well known relation between temperature and lithospheric strength. The thermotectonic model is also in good accord with geophysical characteristics of the Basin and Range Province, which suggests that extension was accompanied by intrusion of basalt into the lower crust, with consequent heating and anatexis. Many studies in the U.S. and elsewhere support the model by showing that continental extension commonly is accompanied by near-surface temperatures corresponding to the brittle-ductile transition, by steep thermal gradients, and by hydrothemal convective systems. A possible driving mechanism from the thermotectonic processes described by the model is the rise of asthenospheric domes or welts, which thin the lithosphere by subcrustal transfer while heating and stretching it. An asthenospheric welt that migrates northeastward while dying out might explain the encroachment of relatively subdued extension onto the Colorado Plateau, as well as the juxtaposition of compressive stress on the plateau with extensional stress in the adjacent Transition Zone and Basin and Range Province.

Arizona↗
USGS1976

Problems in shallow land disposal of solid low-level radioactive waste in the united states

Disposal of solid low-level wastes containing radionuclides by burial in shallow trenches was initiated during World War II at several sites as a method of protecting personnel from radiation and isolating the radionuclides from the hydrosphere and biosphere. Today, there are 11 principal shallow-land burial sites in the United States that contain a total of more than 1.4 million cubic meters of solid wastes contaminated with a wide variety of radionuclides. Criteria for burial sites have been few and generalized and have contained only minimal hydrogeologic considerations. Waste-management practices have included the burial of small quantities of long-lived radionuclides with large volumes of wastes contaminated with shorter-lived nuclides at the same site, thereby requiring an assurance of extremely long-time containment for the entire disposal site. Studies at 4 of the 11 sites have documented the migration of radionuclides. Other sites are being studied for evidence of containment failure. Conditions at the 4 sites are summarized. In each documented instance of containment failure, ground water has probably been the medium of transport. Migrating radionuclides that have been identified include 90 Sr, 137 Cs, 106 Ru, 239 Pu, 125 Sb, 60 Co, and 3 H. Shallow land burial of solid wastes containing radionuclides can be a viable practice only if a specific site satisfies adequate hydrogeologic criteria. Suggested hydrogeologic criteria and the types of hydrogeologic data necessary for an adequate evaluation of proposed burial sites are given. It is mandatory that a concomitant inventory and classification be made of the longevity, and the physical and chemical form of the waste nuclides to be buried, in order that the anticipated waste types can be matched to the containment capability of the proposed sites. Ongoing field investigations at existing sites will provide data needed to improve containment at these sites and help develop hydrogeologic criteria for new sites. These studies have necessitated the development of special drilling, sampling, well construction, and testing techniques. A recent development in borehole geophysical techniques is downhole spectral gammaray analysis which not only locates but identifies specific radionuclides in the subsurface. Field investigations are being supplemented by laboratory studies of the hydrochemistry of the transuranic elements, the kinetics of solid-liquid phase interactions, and the potential complexing of radionuclides with organic compounds and solvents which mobilize normally highly sorbable nuclides. Theoretical studies of digital predictive solute transport models are being implemented to assure their availability for application to problems and processes identified in the field and laboratory.

Bulletin of the International Association of Engin↗
USGS2018

Reductive dechlorination rates of 4,4′-DDE (1-chloro-4-[2,2-dichloro-1-(4-chlorophenyl)ethenyl]benzene) in sediments of the Palos Verdes Shelf, CA

Wastes from the world's largest manufacturer of DDT (1-chloro-4-[2,2,2-trichloro-1-(4-chlorophenyl)ethyl]benzene) were released into the Los Angeles County municipal sewer system from 1947 to 1971. Following primary treatment, the effluent was discharged through a submarine outfall system whereupon a portion of the DDT and associated degradation products were deposited in sediments of the Palos Verdes Shelf (PVS). Parent DDT is present only in trace amounts in the sediments today, the vast majority having been transformed to DDE (1-chloro-4-[2,2-dichloro-1-(4-chlorophenyl)ethenyl]benzene) shortly following deposition. Previously believed to be inert, DDE is slowly being converted to DDMU (1-chloro-4-[2-chloro-1-(4-chlorophenyl)ethenyl]benzene) and DDMU to DDNU (1-chloro-4-[1-(4-chlorophenyl)ethenyl]benzene) via microbially-mediated reductive dechlorination (RDC). Kinetic and compositional data suggest that this process began sometime in the mid- to late 1970s. Rates of DDE RDC in shelf sediments are spatially variable and have proven difficult to determine accurately. This limits our ability to understand the factors controlling RDC rates and to predict the course of natural recovery. In the present study, concentrations of ten DDT compounds and twelve PCB (polychlorinated biphenyl) congeners were determined in cores collected at two locations on the PVS (stations 3C, 6C, ~7km and ~2km downcurrent from the outfalls, respectively). DDE inventories, normalized to those of non-degrading PCB congeners having similar physico-chemical properties, were modeled to yield first-order RDC rates for the period 1981–2010. Average rates at stations 3C and 6C were 0.044±0.004 and 0.008±0.002yr −1 , respectively, with depth-dependent RDC rates at station 3C (1992–2003) ranging from 0.0025 to 0.102yr −1 . Comparison of RDC and total loss (i.e., RDC+physical loss) rates suggests that the average per cent loss of DDE due to RDC is ~90% at station 3C (1981–2010) and ~57% at station 6C (1992–2010). Trajectories of adjusted molar inventories of DDE, DDMU, and DDNU were forecast using a first-order multi-step reaction series (M-SRS) model. The results for DDE are consistent with the normalization procedure; RDC rates at stations 3C and 6C were 0.036±0.002yr −1 and 0.010±0.001yr −1 , respectively. At station 6C, the DDE to DDMU transformation appears to be the rate limiting step in the reaction sequence, DDE k 1 → DDMU k 2 → DDNU k3 → unidentified compound(s), whereas at station 3C RDC rates for DDE and DDMU are roughly equivalent. At both locations the transformation rate of DDNU is 7–20 times that of the other steps. Estimated half-lives of DDE at stations 3C and 6C based on the M-SRS model results are ~19 and 72 years, respectively.

California↗
USGS2025

A partnership between the USGS and the Klamath Tribes to apply structured decision making for chronic wasting disease management

Project Overview: The Klamath Tribes (TKT) are the Klamath, Modoc, and Yahooskin Paiute peoples, and are the first peoples of the land, having lived in ancestral lands of Oregon and California since time immemorial. Members of TKT have rights to hunt, fish, trap, and gather, including the harvest of mule deer ( Odocoileus hemionus ) and elk ( Cervus canadensis nelsoni ) within the 1.19 million acres of their Reserved Treaty Rights Area. Anthropogenic changes threaten the well-being of mule deer and elk and of the Tribes that rely on them. Today, these species are a primary protein source for TKT. They are traded within TKT and among other Tribes and provide materials for cultural and sacred items such as regalia. However, mule deer numbers have been declining across the western states for the past several decades because of multiple stressors, including persistent and frequent drought and wildfires, habitat loss and degradation, vehicle mortality, and increasing barriers to migratory movements between summer and winter ranges. The migratory movements of mule deer, which allow deer to access the best available seasonal habitats, put them at risk of another potential stressor—infection with chronic wasting disease (CWD). Chronic wasting disease is a fatal prion disease of deer that has been detected in 36 U.S. states. It was detected in free-ranging mule deer in northern Idaho in 2021, prompting the Tribes to initiate a planning process for CWD surveillance, prevention, and response measures to preserve and protect the deer and elk within the Reserved Treaty Rights Area. In 2023, the Klamath Tribes Natural Resources Department began to develop their CWD plan by incorporating preliminary input provided by the Klamath Indian Game Commission (KIGC) and working with scientists from the U.S. Geological Survey (USGS). This collaborative effort includes the application of structured decision making and the development of mathematical models to analyze potential CWD management strategies. The result will be a transparent assessment that incorporates TKT values throughout the process and can inform place-based management of the cultural, natural, and physical resources upon which the Tribes depend. In addition, this process may provide opportunities for broader coordination by natural resource management agencies to work together to ensure the long-term health and sustainability of deer and elk populations within the Reserved Treaty Rights Area and throughout the state of Oregon.

Oregon↗
USGS2008

The coral reef of South Moloka'i, Hawai'i— Portrait of a sediment-threatened fringing reef

Moloka‘i, with the most extensive coral reef in the main Hawaiian Islands, is especially sacred to Hina, the Goddess of the Moon. As Hinaalo, she is the Mother of the Hawaiian people; as Hinapuku‘a, she is the Goddess of Fishermen; and in the form Hina‘opuhalako‘a, she is the Goddess who gave birth to coral, coral reefs, and all spiny marine organisms. Interdependence between the reef’s living resources, the people, and their cosmology was the basis for management of Moloka‘i’s coastal waters for over a thousand years. The ancient residents of Moloka‘i built the greatest concentration of fishponds known anywhere, but their mastery of mariculture, something needed now more than ever, was lost after near genocide from exotic Western diseases. Subsequent destruction of the native vegetation for exotic cattle, goats, pigs, sugar cane, and pineapple caused soil erosion and sedimentation on the reef flat. This masterful volume clearly documents that soil washing into the sea is the major threat to the reef today. Abandoned fishponds, choked with sediment, now act as barriers and mud traps, making damage to corals less than it would otherwise would have been. The role of mud and freshwater from land in preventing coral reef growth, clearly articulated in Charles Darwin’s first book, The Structure and Distribution of Coral Reefs, is the major theme of this book. All around the tropics, coral reefs have died from huge increases in terrestrial sedimentation that resulted from destruction of hillside forests for cash-crop agriculture and pastures in the colonial era, especially in Latin America, Asia, and the islands of the Caribbean and Indo-Pacific. It is obvious that one cannot manage the coastal zone as a unit separate from the watersheds that drain into it. Yet there has been surprisingly little comprehensive scientific study of these impacts. In this landmark volume, U.S. Geological Survey researchers and their colleagues have developed and applied a remarkably integrated approach to the reefs of Moloka‘i, combining geology, oceanography, and biology to provide an in-depth understanding of the processes that have made these reefs grow and that now limit them. They have joined old fashioned natural history of marine animals and plants with study of the geological evolution of the island, hydrology, meteorology, and land-use history, to an arsenal of new methods of remote sensing, including aerial photography, laser ranging, infrared thermal mapping, seismic reflection, in-situ instrumentation to measure chemical parameters of water quality, and direct measurements of the physical driving forces affecting them—such as wave energy, currents, sedimentation, and sediment transport. They provide a level of documentation and insight that has never been available for any reef before. A remarkable feature of this book is that it is aimed at the people of Moloka‘i to inform them of what is happening to their reef and what they might do to preserve their vital resources. The scientific data and interpretations are expressed in unusually clear and comprehensible language, free of the professional jargon that makes most technical publications impenetrable to the public that most needs to know about them, yet without loss of scientific rigor. Here readers will see clearly explained the whole path of soil loss, from the impacts of wild pigs and goats at higher elevations, deforestation of the hills for cattle pasture at lower levels, and denudation of low lands for cash crops. The resulting biological impoverishment has bared the soils, which wash away in flash storms, smothering the inshore reefs, whose growth was already limited because they had grown right up to sea level. The data in this book show that the mud doesn’t get far if it is washed into the sea during a big storm with heavy waves. Afterwards this mud keeps getting stirred up by every succeeding storm, spreading and affecting corals over wider areas until it is finally washed out of the system—and that only happens if there is no more new mud washing onto the reef. I saw this myself a few years ago in Pila‘a Bay on Kaua‘i, where a bulldozed hillside of abandoned sugar cane fields had slumped right on top of a coral reef following exceptional rains. Years later, the algae species were zoned in a way that clearly mapped the distribution of nutrients washed into the bay, most likely from fertilizers bound to the eroded soils. That pattern closely mimics, on a small scale, that shown in Moloka‘i in this volume, where the inner reef is covered with algae, zoned by species in a way that points to land-based sources of nutrients, while the outermost reef slope is still coral dominated, and the deep algae seem to indicate deep-water nutrient upwelling. What of the future? The Hawaiian Islands have been exceptionally fortunate to be spared the worst coral heatstroke death from high temperatures, at least to date. So far, the worst global warming impacts have luckily been small in this region, and the small number of people on Moloka‘i has kept population densities, and sewage pollution, low compared to the more developed islands. Nutrients from years of sugar and pineapple fertilization, and the washing of this soil onto the reefs, show clear influences on the pattern of algae on the reef. Even at very low levels of nutrients, well below that which drives algae to smother and kill coral reefs, more algae is present. Soil erosion control is therefore the key to better management of both nutrients and turbidity on Moloka‘i reefs. To that end land management actions mentioned in this book, such as suppressing wild fires and eliminating wild goats and pigs, could be made even more effective if supplemented by active erosion control using plants whose roots bind the soil effectively in place. Through all of these efforts, Hina and the people of Moloka‘i could be happy again!

Hawaii↗
USGS2010

Proceedings of the Colorado River Basin Science and Resource Management Symposium, November 18-20, 2008, Scottsdale, Arizona

Since the 1980s, four major science and restoration programs have been developed for the Colorado River Basin to address primarily the conservation of native fish and other wildlife pursuant to the Endangered Species Act (ESA): (1) Recovery Implementation Program for Endangered Fish Species in the Upper Colorado River Basin (commonly called the Upper Colorado River Endangered Fish Recovery Program) (1988); (2) San Juan River Basin Recovery Implementation Program (1992); (3) Glen Canyon Dam Adaptive Management Program (1997); and (4) Lower Colorado River Multi-Species Conservation Program (2005). Today, these four programs, the efforts of which span the length of the Colorado River, have an increasingly important influence on water management and resource conservation in the basin. The four efforts involve scores of State, Federal, and local agencies; Native American Tribes; and diverse stakeholder representatives. The programs have many commonalities, including similar and overlapping goals and objectives; comparable resources and threats to those resources; and common monitoring, research, and restoration strategies. In spite of their commonalities, until recently there had been no formal opportunity for information exchange among the programs. To address this situation, the U.S. Geological Survey (USGS) worked in coordination with the four programs and numerous Federal and State agencies to organize the first Colorado River Basin Science and Resource Management Symposium, which took place in Scottsdale, AZ, in November 2008. The symposium's primary purpose was to promote an exchange of information on research and management activities related to the restoration and conservation of the Colorado River and its major tributaries. A total of 283 managers, scientists, and stakeholders attended the 3-day symposium, which included 87 presentations and 27 posters. The symposium featured plenary talks by experts on a variety of topics, including overviews of the four restoration programs, water-management actions aimed at restoring native fish habitat, climate change, assessments of the status of native and nonnative fish populations, and Native American perspectives. Intermixed with plenary talks were four concurrent technical sessions that addressed the following important topics: (1) effects of dam and reservoir operations on downstream physical and biological resources; (2) native fish propagation and genetic management and associated challenges in co-managing native and nonnative fish in the Colorado River; (3) monitoring program design, case studies, and links to management; and (4) riparian system restoration, monitoring, and exotic species control efforts.

Scientific Investigations Report↗
USGS2023

Soil and geomorphic patterns within relict charcoal hearths could represent unique ecosystem niches

Hearths used for 19th and 20th century charcoal manufacturing have been found to have unique plant communities or to produce unique growth characteristics for some species but not others. Given known differences in hearth morphology, within hearth physical and chemical differences may exist and result in unique ecologic niches. We examined soil stratigraphy across 8 relict charcoal hearths (RCH) and control soils on different landforms near a 19th century furnace complex (Greenwood Furnace, northcentral Appalachians USA). Soils were analyzed for particle size, total and trace elements, and fertility. Platform creation resulted in soils from upslope RCH positions mixed with subsurface materials on the downslope side to create a stabilized platform. The thin, uniform thickness of charcoal surface horizons (Ac) suggests that RCHs were not used more than once for charcoal manufacturing or that charcoal was always removed very efficiently. While rubification of soil or rock from high heat was seen in 6 of 8 sites sampled, it was not extensive across sampled areas of any one hearth, which suggests hearth use may not have frequent, hot enough, or spatially disparate. Soil fertility characteristics change within RCHs but also by landscape position. Downslope RCH positions are enriched in some parameters compared to control soils (total C, Mehlich 3 Mg, Ca, and Aquia Regia digestion Mn) and that enrichment often is from the surface downward. Downslope enrichment within RCH soils may have occurred from charcoal and released ions, slope erosion and accumulation, or transportation of constructed materials during RCH creation. Landscape position may accentuate or mute soil chemistry differences. Greenwood Furnace RCHs have unique patterns of chemistry, which could result in unique niches for flora and maybe fauna within RCH. Future research should more closely investigate whether hearths support unique species assemblages and how they may play a role in enhancing today’s forest biodiversity.

Pennsylvania↗
USGS2005

Using cosmogenic nuclides to contrast rates of erosion and sediment yield in a semi-arid, arroyo-dominated landscape, Rio Puerco Basin, New Mexico

Analysis of in-situ-produced 10Be and 26Al in 52 fluvial sediment samples shows that millennial-scale rates of erosion vary widely (7 to 366 m Ma-1) through the lithologically and topographically complex Rio Puerco Basin of northern New Mexico. Using isotopic analysis of both headwater and downstream samples, we determined that the semi-arid, Rio Puerco Basin is eroding, on average, about 100 m Ma-1. This rapid rate of erosion is consistent with estimates made using other techniques and is likely to result from a combination of easily eroded lithologies, sparse vegetation, and monsoon-dominated rainfall. Data from 331 stream water samples collected by the US Geological Survey between 1960 and 1995 are consistent with basin-wide, average chemical denudation rates of only about 1??4 m Ma-1; thus, the erosion rates we calculate may be considered rates of sediment generation because physical weathering accounts for almost 99 per cent of mass loss. The isotopic data reveal that sediment is generally well mixed downstream with the area-weighted average sediment generation rate for 16 headwater samples (234 ton km-2 a-1 for basin area 170 to 1169 km2) matching well that estimated from a single sample collected far downstream (238 ton km-2 a-1, basin area = 14 225 km2). A series of 15 samples, collected from an arroyo wall and representing deposition through the late Holocene, indicates that 10Be concentration in sediment delivered by the fluvial system has not changed appreciably over the last 1200 years despite at least two cycles of arroyo cutting and filling. Other samples (n = 21) were collected along the drainage network. Rio Puerco erosion rates scale directly with a variety of metrics describing vegetation, precipitation, and rock erodibility. Using the headwater basins for calibration, the erosion rates for both the downstream samples and also the data set as a whole, are best modelled by considering a combination of relief and vegetation metrics, both of which co-vary with precipitation and erodibility as inferred from lithology. On average, contemporary sediment yields, determined by monitoring suspended-sediment discharge, exceed cosmogenically determined millennial-scale erosion rates by nearly a factor of two. This discrepancy, between short-term rates of sediment yield and long-term rates of erosion, suggests that more sediment is currently being exported from the basin than is being produced. Because the failure of incised channel walls and the head cutting of arroyo complexes appear to be the main sources of channel sediment today, this incongruence between rates of sediment supply and sediment yield is likely to be transitory, reflecting the current states of the arroyo cycle and perhaps the influence of current or past land-use patterns. Copyright ?? 2005 John Wiley & Sons, Ltd.

Earth Surface Processes and Landforms↗
USGS2017

Platinum-group elements

The platinum-group elements (PGEs)—platinum, palladium, rhodium, ruthenium, iridium, and osmium—are metals that have similar physical and chemical properties and tend to occur together in nature. PGEs are indispensable to many industrial applications but are mined in only a few places. The availability and accessibility of PGEs could be disrupted by economic, environmental, political, and social events. The United States net import reliance as a percentage of apparent consumption is about 90 percent. PGEs have many industrial applications. They are used in catalytic converters to reduce carbon monoxide, hydrocarbon, and nitrous oxide emissions in automobile exhaust. The chemical industry requires platinum or platinum-rhodium alloys to manufacture nitric oxide, which is the raw material used to manufacture explosives, fertilizers, and nitric acid. In the petrochemical industry, platinum-supported catalysts are needed to refine crude oil and to produce aromatic compounds and high-octane gasoline. Alloys of PGEs are exceptionally hard and durable, making them the best known coating for industrial crucibles used in the manufacture of chemicals and synthetic materials. PGEs are used by the glass manufacturing industry in the production of fiberglass and flat-panel and liquid crystal displays. In the electronics industry, PGEs are used in computer hard disks, hybridized integrated circuits, and multilayer ceramic capacitors. Aside from their industrial applications, PGEs are used in such other fields as health, consumer goods, and finance. Platinum, for example, is used in medical implants, such as pacemakers, and PGEs are used in cancer-fighting drugs. Platinum alloys are an ideal choice for jewelry because of their white color, strength, and resistance to tarnish. Platinum, palladium, and rhodium in the form of coins and bars are also used as investment commodities, and various financial instruments based on the value of these PGEs are traded on major exchanges. PGEs are among the rarest metals; Earth’s upper crust contains only about 0.0005 part per million (ppm) platinum. Today, the average grade of PGEs in ores that are mined primarily for their PGE concentrations varies from 5 to 15 ppm, although the concentration of PGEs in hand-picked ore specimens may range from tens to hundreds of parts per million. More than 100 different minerals have one of the PGEs as an essential component. PGE minerals occur as native metals. They also occur as compounds with other transition metals (copper, iron, mercury, nickel, and silver), post-transition metals (bismuth, lead, and tin), metalloids (antimony, arsenic, and tellurium), and nonmetals (selenium and sulfur). From 1900 to 2011, approximately 14,200 metric tons of PGEs was produced, and roughly 95 percent of that production (13,500 metric tons) took place between 1960 and 2011. The breakdown of production by country shows that, since 1900, about 90 percent of the production came from South Africa and Russia. The secondary supply of platinum, palladium, and rhodium is obtained through the recycling of catalytic converters from end-of-life vehicles, jewelry, and electronic equipment. Recycled platinum, palladium, and rhodium provide a significant proportion of the world’s total supply; these secondary sources are sufficient to close the gap between world mine production and consumption. Exploration and mining companies report resources of about 104,000 metric tons of PGEs (including minor amounts of gold) in mineral deposits around the world that could be developed. For PGEs, almost all the reported production and identified resources are associated with deposits in three geologic features—the Bushveld Complex, which is a layered mafic-to-ultramafic intrusion in South Africa; the Great Dyke, which is a layered mafic-to-ultramafic intrusion in Zimbabwe; and sill-like intrusions associated with flood basalts in the Noril’sk-Talnakh area of Russia. The metallic forms of PGEs are generally considered to be inert. PGEs pose a risk to human health only in cases where individuals are occupationally exposed to synthetic PGE compounds, especially workers in precious-metal refineries. In the natural environment, background PGE concentrations are low in water, sediment, soil, and plants. Anthropogenic sources of PGEs in the environment include catalytic converters used in modern automobiles, platinum-based chemotherapy drugs, and smelter emissions. The abundance of sulfide minerals defines the environmental and geologic characteristics of PGE-enriched magmatic sulfide deposits; those deposits with the highest amount of sulfide minerals could have the highest environmental impact. Acid rock drainage from reef-type and contact-type deposits is unlikely because the ores and their host rocks contain low proportions of sulfide minerals. For some conduit-type orebodies with massive ores, mineral-processing techniques separate and produce concentrates of copper-, iron-, and nickel-bearing sulfide minerals; those with copper and nickel are processed to extract metal, but the iron-sulfide minerals, mainly pyrrhotite, are discarded as waste. This results in waste material with a high acid-generating potential. The most significant primary source of PGEs in the United States is a deposit in the Stillwater Complex, which is a layered igneous intrusion in Montana. Approximately 305 metric tons of platinum and palladium have been mined from the Stillwater Complex deposit since 1986. Exploration and development drilling indicate that another 2,200 metric tons are present. Mining has progressed to depths of 1,800 meters below the surface, but the bottom of the ore deposit has not been reached; geologic estimates suggest that another 1,000 to 6,200 metric tons of PGEs could be present at depth. In the future, PGEs may be mined from deposits found near the base of the Duluth Complex, which is a group of igneous intrusions in Minnesota.

Professional Paper↗