SEARCH · Geology Reports

Results for “Modern Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5Linked to original sources

USGS2013

Groundwater–surface-water exchange and the geologic setting of northern Minnesota's lakes, wetlands, and streams—Modern-day relevance of Tom Winter's legacy

Tom Winter spent nearly 50 years conducting research in earth science, and he specialized in the exchange between groundwater and surface water. Tom's highly productive career began in Minnesota. This fi eld trip revisits many of the places where Tom conducted his early research and demonstrates the continuing relevance of that research. Stops and topics include the groundwater infl uence on the record low stage of White Bear Lake, the contribution of groundwater to continually rising water levels in an abandoned open-pit iron mine, hydrogeology of the Shingobee headwaters aquatic ecosystem research site, hydrogeology of Lake Sallie, geology associated with the Pillager water gap, and the hydrogeology of Little Rock Lake.

GSA Field Guides↗

USGS1969

The geographic applications program of the U. S. Geological Survey

The fundamental objective of modern Geography is to improve man's level of living through a better understanding of man-environment inter actions. Related goals of the USGS program for applications of remote sensor data to Geographical research are: (1) the analysis and improvement of land use, with special emphasis on urban problems; and (2) more effective use of the total available energy budget, including insolation, mineral fuels, atomic energy, human resources, and mental energy, all of which are integrated into man-environment interactions. The collection of data through remote sensors in air craft and spacecraft is financed largely by funds from NASA, and is part of the much broader EROS Program of the Department of the Interior. Results to date have achieved much toward the identification of remote sensor signatures for Earth features and human activities, and toward evaluation of instruments for collecting essential information.

Photogrammetric Engineering↗

USGS2024

Modern coral range expansion off southeast Florida falls short of Late Holocene baseline

As thermal stress and disease outbreaks decimate coral reefs throughout the tropics, there is growing evidence that higher latitude marine environments may provide crucial refuges for many at-risk, temperature-sensitive coral species. However, our understanding of how coral populations expand into new areas and sustain themselves over time is constrained by the limited scope of modern observations. Here, we provide geological insights into coral range expansions by reconstructing the composition of a Late Holocene-aged subfossil coral death assemblage on the southeast Florida reef tract and comparing it to modern reefs throughout the region. Our findings show that the Late Holocene coral assemblages were dominated by now critically endangered Acropora species between ~3500 and 1800 years before present, mirroring classic zonation patterns characteristic of healthy pre-1970s Caribbean reefs. In contrast, the modern reefs off southeast Florida are becoming increasingly dominated by stress-tolerant species like Porites astreoides and Siderastrea siderea despite modest expansions of Acropora cervicornis over the past several decades. Our results suggest that ongoing anthropogenic stressors, not present during the Late Holocene, are likely limiting the ability of modern higher latitude reefs in Florida to function as long-term climate refugia.

Florida↗

USGS2004

Surficial materials in the conterminous United States

Introduction: The Earth's bedrock is overlain in many places by a loosely compacted and mostly unconsolidated blanket of sediments in which soils commonly are developed. These sediments generally were eroded from underlying rock, and then were transported and deposited. In places, they exceed 1,000 ft (330 m) in thickness. Where the sediment blanket is absent, bedrock is either exposed or has been weathered to produce a residual soil. This map shows the sediments and the weathered, residual material; for ease of discussion, these are referred to here as 'surficial materials.' Certain areas on this map include a significant number of rock outcrops, which cannot be shown at the scale of the map; this is noted in the 'Description of Map Units' section. Most daily human activities occur on or near the Earth's surface. Homeowners, communities, and governments can make improved decisions about hazard, resource, and environmental issues, when they understand the nature of surficial materials and how they vary from place to place. For example, are the surficial materials upon which a home is built stable enough to resist subsidence or lateral movement during an earthquake? Do these materials support a ground water resource adequate for new homes? Can they adequately filter contaminants and protect buried aquifers both in underlying sediments and in bedrock? Are they suitable for development of a new wetland? Where can we find materials suitable for aggregate? The USGS National Cooperative Geologic Mapping Program (NCGMP) works with the State geological surveys to identify priority areas for mapping of surficial materials (for example, in areas of complex and poorly understood deposits of various sediment types, where metropolitan areas are experiencing rapid growth). To help establish these priorities, a modern, synoptic overview of the geology is needed. This map represents an overview of our current knowledge of the composition and distribution of surficial materials in the conterminous United States. (The map covers only the conterminous U.S. because similar geologic information in digital form was not readily available for Alaska and Hawaii.) The best available map has been a highly generalized depiction at 1:7,500,000-scale (about 120 miles to the inch), prepared for the USGS National Atlas (Hunt, 1979; 1986). This map is compiled at a slightly more detailed scale (about 80 miles to the inch) than Hunt (1979; 1986). We used digital methods, which enabled us to rapidly incorporate the variety of source maps available to us. State-scale geologic maps from the western United States were brought directly into this map, without expending the time needed to resolve interpretive differences among them. Therefore, abrupt changes in surficial materials are indicated along many State boundaries. This of course is an artifact of our compilation technique, and a limitation on its utility. However, this approach supports the basic premise of the map -- to provide an overview of surficial materials, and to identify areas where additional work may be needed in order to resolve scientific issues that can, in turn, lead to improved mapping.

Open-File Report↗

USGS2023

Implementation plan of the National Cooperative Geologic Mapping Program strategy—Northeast region of the United States: New York and New England

Complexly deformed igneous, metamorphic, and sedimentary rocks form the bedrock of the Northeast region of the United States. Variably thick unconsolidated sediments deposited by glacial, fluvial, and eolian systems locally cover the bedrock. New geologic mapping focuses on areas lacking modern, detailed studies or syntheses, and contributes to existing framework research. This report addresses plans for the continued development of regionally and nationally consistent geologic maps and map databases, efforts to answer outstanding geologic questions, and societal concerns associated with related geologic topics, such as hazards, geologic and hydrologic resources, and environmental issues.

Connecticut, Massachusetts, Maine, New Hampshire, ↗

USGS2014

Coal and petroleum resources in the Appalachian basin: distribution, geologic framework, and geochemical character

Fossil fuels from the Appalachian basin region have been major contributors to the Nation’s energy supplies over much of the last three centuries. Appalachian coal and petroleum resources are still available in sufficient quantities to contribute significantly to fulfilling the Nation’s energy needs. Although both conventional oil and gas continue to be produced in the Appalachian basin, most new wells in the region are drilled in shale reservoirs to produce natural gas. U.S. Geological Survey (USGS) Professional Paper 1708 is a modern, indepth collection of reports, cross sections, and maps that describe the geology of the Appalachian basin and its fossil fuel resources. This publication supplements and updates older USGS regional studies of Appalachian basin coal and petroleum resources. Some chapters are new, and several have been published in outside journals or as other USGS publications. Although this volume is not a comprehensive regional treatment of all notable geologic and fossil fuel localities in the Appalachian basin, the selected study areas and topics presented in the chapters pertain to large segments of the basin and a wide range of stratigraphic intervals. This volume discusses the locations of coal and petroleum accumulations, the stratigraphic and structural framework, and the geochemical characteristics of the coal beds and petroleum in the basin, as well as the results of recent USGS assessments of coal, oil, and gas resources in the basin. Many of the maps and accompanying data supporting the reports in this volume are available from chapter I.1 as downloadable geographic information system (GIS) data files about the characteristics of selected coal beds and oil and gas fields, locations of oil and gas wells, coal production, coal chemistry, total petroleum system (TPS) boundaries, and bedrock geology. Log ASCII Standard (LAS) files for geophysical (gamma ray) wireline well logs are included in other chapters. Professional Paper 1708 is intended primarily for geoscientists in academia, industry, and government who are interested in Appalachian basin geology and its coal and petroleum resources. Other users, however, may find the topics, papers, and digital images valuable for land-use and policy planning. Among the anticipated benefits of the report are improvements in (1) resource assessment estimates and methodology, (2) exploration strategies, (3) basin models, and (4) energy use policies.

Appalachian basin↗

USGS2014

Executive summary

Fossil fuels from the Appalachian basin region have been major contributors to the Nation’s energy needs over much of the last three centuries. Early records indicate that Appalachian coal was first mined in the middle 1700s (Virginia and Pennsylvania) and was used sparingly to fuel colonial settlements and, later, a fledgling industrial-based economy along the eastern seaboard of the United States (de Witt and Milici, 1989). In 2011, central Appalachian basin coal production accounted for approximately 77 percent of all U.S. metallurgical (or coking) coal and 29 percent of total U.S. production (U.S. Energy Information Administration, 2013). Following initial discoveries and commercial use in western New York (1821) and Ohio and West Virginia (mid-1830s), the Appalachian petroleum (oil and gas) industry began in earnest in 1859 with the discovery of oil at the Drake well in northwestern Pennsylvania. Between 1860 and 1989, the Appalachian basin produced more than 2.5 billion barrels of oil (BBO) and more than 30 trillion cubic feet of gas (TCFG) from more than 500,000 wells (de Witt and Milici, 1989). Although both oil and gas continue to be produced in the Appalachian basin, most new wells in the region are drilled in shale reservoirs to produce natural gas. Appalachian coal and petroleum resources are still available in sufficient quantities to contribute significantly to the Nation’s energy needs. For example, the U.S. Energy Information Administration (2010) estimated that there are 6,484 million short tons of recoverable coal reserves in the Appalachian basin. Similarly, about 14.7 billion barrels of oil equivalent (BBOE) (1.2 BBO+81 TCFG [or 13.5 BBOE]) of recoverable Appalachian basin oil and gas remain available of an estimated ultimate endowment of approximately 25.5 billion BBOE (cumulative production + reserves + estimated recoverable undiscovered resources) (this volume, chap. C.1). U.S. Geological Survey (USGS) Professional Paper 1708 is a modern, indepth collection of reports, cross sections, and maps that describe the geology of the Appalachian basin and its fossil fuel resources. Several of the chapters have been published in outside journals or as other USGS publications. Although this volume is not a comprehensive regional treatment of all notable geologic and fossil fuel localities in the Appalachian basin, the selected study areas and topics presented in the chapters cover large segments of the basin and a wide range of stratigraphic intervals. As the title implies, this volume addresses topics that refer to the locations of coal and petroleum accumulations, the stratigraphic and structural framework, and the geochemical characteristics of the coal beds and petroleum in the basin, as well as the results and documentation of recent USGS assessments of coal, oil, and gas resources in the basin. Many of the maps and accompanying data supporting the reports in this volume are available as downloadable geographic information system (GIS) data files (such as selected coal beds, selected oil and gas fields, locations of oil and gas wells, coal production, coal chemistry, total petroleum system (TPS) boundaries, and bedrock geology). Log ASCII Standard (LAS) files for geophysical (gamma ray) wireline well logs also are included. This publication supplements and updates older USGS regional studies of Appalachian basin coal and petroleum resources such as those by Arndt and others (1968) and the numerous contributors to USGS Miscellaneous Map Series I−917 (for example, Harris and others, 1978), respectively. USGS Professional Paper 1708 is intended primarily for geoscientists in academia, industry, and government who are interested in Appalachian basin geology and its coal and petroleum resources. Other users, however, may find the wide variety of topics, papers, and digital images of value for landuse and policy planning issues. Among the anticipated benefits of the report are improvements in (1) resource assessment estimates and methodology, (2) exploration strategies, (3) basin models, and (4) energy use policies.

Appalachian Basin↗

USGS2019

The Value of Data – The Qatar Geologic Mapping Project

The State of Qatar is in a period of rapid development, modernization, and population growth. One of the most important factors influencing the long-term success and sustainability of future development is a comprehensive understanding of the region’s geologic regime, geotechnical conditions, natural resources, and environmental constraints. To obtain this understanding, the Ministry of Municipality and Environment (MME) of the State of Qatar has undertaken the Qatar Geological Mapping Project (QGMP). The project was envisioned with the strategic foresight to compile and utilize existing and legacy subsurface data collected as part of its massive infrastructure and development projects as the foundation for developing modern scientific resources including geologic maps, digital thematic maps, and a 3-dimensional geological model of the Doha metropolitan area. Recently, the MME, in consultation with Gannett Fleming, Inc. (GF) and the United States Geological Survey (USGS) concluded the data collection and analysis phase (Phase I) of the two-phase QGMP. Phase I included: the development of a comprehensive geotechnical relational database populated with data digitized from more than 13,000 subsurface data logs; a detailed data quality analysis and distribution assessment; an extensive gap analysis and needs assessment; and careful design of the geologic mapping and subsurface investigation programs for the next phase of the project.

Conference Paper↗

USGS2015

Lake formation, characteristics and evolution in retroarc deposystems: A synthesis of data from the modern Andean orogen and its associated basins

Lake deposystems are commonly associated with retroarc mountain belts in the geological record. These deposystems are poorly characterized in modern retroarcs, placing limits on our ability to interpret environmental signals from ancient deposits. To address this problem, we have synthesized our existing knowledge about the distribution, morphometrics, and sedimentary geochemical characteristics of tectonically formed lakes in the central Andean retroarc. Large, active mountain belts such as the Andes frequently create an excess of sediment, to the point that modeling and observational data both suggest their adjacent retroarc basins will be rapidly overfilled by sediments. Lake formation, requiring topographic closure, demands special conditions such as topographic isolation and arid climatic conditions to reduce sediment generation, and bedrock lithologies that yield little siliciclastic sediment. Lacustrine deposition in the modern Andean retroarc has different characteristics in the six major morphotectonic zones discussed. (1) High-elevation hinterland basins of the arid Puna-Altiplano Plateau frequently contain underfilled and balanced-filled lakes that are potentially long-lived and display relatively rapid sedimentation rates. (2) Lakes are rare in piggyback basins, although a transition zone exists where basins that originally formed as piggybacks are transferred to the hinterland through forward propagation of the thrust belt. Here, lakes are moderately abundant and long-lived and display somewhat lower sedimentation rates than in the hinterland. (3) Wedge-top and (4) foredeep deposystems of the Andean retroarc are generally overfilled, and lakes are small and ephemeral. (5) Semihumid Andean back-bulge basins contain abundant small lakes, which are moderately long-lived because of underfilling by sediment and low sedimentation rates. (6) Broken foreland lakes are common, typically underfilled, large, and long-lived playa or shallow systems.

Book chapter↗

USGS2017

Lidar-revised geologic map of the Des Moines 7.5' quadrangle, King County, Washington

This map is an interpretation of a modern lidar digital elevation model combined with the geology depicted on the Geologic Map of the Des Moines 7.5' Quadrangle, King County, Washington (Booth and Waldron, 2004). Booth and Waldron described, interpreted, and located the geology on the 1:24,000-scale topographic map of the Des Moines 7.5' quadrangle. The base map that they used was originally compiled in 1943 and revised using 1990 aerial photographs; it has 25-ft contours, nominal horizontal resolution of about 40 ft (12 m), and nominal mean vertical accuracy of about 10 ft (3 m). Similar to many geologic maps, much of the geology in the Booth and Waldron (2004) map was interpreted from landforms portrayed on the topographic map. In 2001, the Puget Sound Lidar Consortium obtained a lidar-derived digital elevation model (DEM) for much of the Puget Sound area, including the entire Des Moines 7.5' quadrangle. This new DEM has a horizontal resolution of about 6 ft (2 m) and a mean vertical accuracy of about 1 ft (0.3 m). The greater resolution and accuracy of the lidar DEM compared to topography constructed from air-photo stereo models have much improved the interpretation of geology, even in this heavily developed area, especially the distribution and relative age of some surficial deposits. For a brief description of the light detection and ranging (lidar) remote sensing method and this data acquisition program, see Haugerud and others (2003).

Washington↗

USGS2009

Accretionary orogens through Earth history

Accretionary orogens form at intraoceanic and continental margin convergent plate boundaries. They include the supra-subduction zone forearc, magmatic arc and back-arc components. Accretionary orogens can be grouped into retreating and advancing types, based on their kinematic framework and resulting geological character. Retreating orogens (e.g. modern western Pacific) are undergoing long-term extension in response to the site of subduction of the lower plate retreating with respect to the overriding plate and are characterized by back-arc basins. Advancing orogens (e.g. Andes) develop in an environment in which the overriding plate is advancing towards the downgoing plate, resulting in the development of foreland fold and thrust belts and crustal thickening. Cratonization of accretionary orogens occurs during continuing plate convergence and requires transient coupling across the plate boundary with strain concentrated in zones of mechanical and thermal weakening such as the magmatic arc and back-arc region. Potential driving mechanisms for coupling include accretion of buoyant lithosphere (terrane accretion), flat-slab subduction, and rapid absolute upper plate motion overriding the downgoing plate. Accretionary orogens have been active throughout Earth history, extending back until at least 3.2 Ga, and potentially earlier, and provide an important constraint on the initiation of horizontal motion of lithospheric plates on Earth. They have been responsible for major growth of the continental lithosphere through the addition of juvenile magmatic products but are also major sites of consumption and reworking of continental crust through time, through sediment subduction and subduction erosion. It is probable that the rates of crustal growth and destruction are roughly equal, implying that net growth since the Archaean is effectively zero.

Geological Society Special Publication↗

USGS1971

An evaluation of procedures used in computing chemical denudation rates

Computations of chemical denudation rates (that is, the average rate of lowering of the earth's crust by chemical processes) should be based only upon those components of dissolved loads of streams that are derived from chemical weathering of rocks and soils, even though identification of those components is difficult and imprecise. Past computations of chemical denudation rates exaggerated by 1.4 to 2.4 times the significance of this process because they were calculated from total dissolved loads. Identification of separate denudation and nondenudation components in a water analysis can be done most readily for streams in crystalline silicate rock terrane where commonly 25 to 55 percent of the dissolved solids are HCO 3 −1 , SO 4 −2 , Cl −1 , and NO 3 −1 that cannot be derived from the underlying rock; instead these ions are derived either directly from the atmosphere or from atmosphere-biosphere interactions. Most of the remaining solutes are derived from chemical weathering or rainfall, or both. Existing data are often insufficient to separate these two components, but atmospheric contributions to dissolved loads of dilute natural waters are substantial. The commonly observed increased concentration of dissolved solids in chemically polluted rivers is produced by concentration of natural dissolved loads by evaporation, and by addition of solutes not present in natural waters. Concentration of natural solutes represents a modification of natural denudation processes that does not change the rate of denudation. Addition of new solutes represents man-induced, accelerated chemical denudation. Extrapolation of modern chemical denudation rates to geologic situations is extremely imprecise because of uncertainties in assessing man's influence on present dissolved loads, in reconstructing the number and magnitude of past climatic changes, and in evaluating the effects of evolving flora and fauna.

Bulletin of the Geological Society of America↗

USGS2013

U-Pb ages of detrital zircons from the Tertiary Mississippi River delta plain in central Louisiana: Insights into sediment provenance

The sources of the tremendous amount of Cenozoic siliciclastic sediment deposited in the Gulf of Mexico region remain debated because of a lack of definitive provenance-identifying characteristics. In an effort to build on prior provenance analysis, we present 101–160 single-grain detrital zircon U-Pb ages for each of 10 outcrop samples from Upper Paleocene to Upper Miocene sandstones from a ∼10,000 km2 swath of central Louisiana corresponding to the ancient Mississippi River Delta, the largest Cenozoic depocenter in the northern Gulf of Mexico region. Sample depositional age control is derived from biostratigraphy and/or regional lithostratigraphic correlation. U-Pb ages in each of the samples range from Cenozoic to Archean, and correspond to the ages of various geologic terranes that underlie the modern Mississippi River drainage basin. However, the prominence of various age distributions changes systematically through the Cenozoic stratigraphy, and pronounced shifts in the abundance of certain age distributions between stratal packages appear to be correlated to shifts in heavy mineral assemblages recorded across the northern Gulf of Mexico coastal plain. Comparison of coastal plain detrital zircon age distributions to age distributions from North American sedimentary cover and the ages of major North American crystalline basement rocks, aided by a sediment mixing model, illuminates the provenance of each of the stratal packages, and suggests that (1) the Mississippi River catchment has resembled its present configuration, at least in the east-west dimension, for much, if not all, of the Cenozoic, and (2) depositional episodes on the Louisiana coastal plain characterized by high sediment supply also corresponded to high proportions of sediment sourcing from the Sevier-Laramide region of the interior western United States. Sediment supply to the Louisiana coastal plain by the paleo–Mississippi River has generally been high during the Cenozoic, except for an anomalous low during the Middle Eocene, when the abundance of sediment derived from the Rocky Mountain region decreased dramatically relative to sediment derived from the Appalachian region.

Louisiana↗

USGS1994

Circum-North Pacific tectonostratigraphic terrane map

The companion tectonostratigraphic terrane and overlap assemblage of map the Circum-North Pacific presents a modern description of the major geologic and tectonic units of the region. The map illustrates both the onshore terranes and overlap volcanic assemblages of the region, and the major offshore geologic features. The map is the first collaborative compilation of the geology of the region at a scale of 1:5,000,000 by geologists of the Russian Far East, Japanese, Alaskan, Canadian, and U.S.A. Pacific Northwest. The map is designed to be a source of geologic information for all scientists interested in the region, and is designed to be used for several purposes, including regional tectonic analyses, mineral resource and metallogenic analyses (Nokleberg and others, 1993, 1994a), petroleum analyses, neotectonic analyses, and analyses of seismic hazards and volcanic hazards. This text contains an introduction, tectonic definitions, acknowledgments, descriptions of postaccretion stratified rock units, descriptions and stratigraphic columns for tectonostratigraphic terranes in onshore areas, and references for the companion map (Sheets 1 to 5). This map is the result of extensive geologic mapping and associated tectonic studies in the Russian Far East, Hokkaido Island of Japan, Alaska, the Canadian Cordillera, and the U.S.A. Pacific Northwest in the last few decades. Geologic mapping suggests that most of this region can be interpreted as a collage of fault-bounded tectonostratigraphic terranes that were accreted onto continental margins around the Circum- . orth Pacific mainly during the Mesozoic and Cenozoic (Fujita and ewberry, 1983; 1987; Parfenov, 1984, 1991; Howell, 1985; Watson and Fujita, 1985; Parfenov and Natal'in, 1984; Jones and others. 1987; Monger and Berg, 1987, Fujita and Cook. 1990; Zonenshain and others. 1990; Natal'in, 1991, 1993; Moore and others, 1992; Silberling and others, 1992; Nokleberg and others. 1992, 1993, 1994a; Parfenov and others. 1993; Plaflcer and Berg, 1994; Tabor, 1994). This map is the result of extensive geologic mapping and associated tectonic studies in the Russian Far East, Hokkaido Island of Japan, Alaska, the Canadian Cordillera, and the U.S.A. Pacific Northwest in the last few decades. Geologic mapping suggests that most of this region can be interpreted as a collage of fault-bounded tectonostratigraphic terranes that were accreted onto continental margins around the Circum- . orth Pacific mainly during the Mesozoic and Cenozoic (Fujita and ewberry, 1983; 1987; Parfenov, 1984, 1991; Howell, 1985; Watson and Fujita, 1985; Parfenov and Natal'in, 1984; Jones and others. 1987; Monger and Berg, 1987, Fujita and Cook. 1990; Zonenshain and others. 1990; Natal'in, 1991, 1993; Moore and others, 1992; Silberling and others, 1992; Nokleberg and others. 1992, 1993, 1994a; Parfenov and others. 1993; Plaflcer and Berg, 1994; Tabor, 1994). On the companion map and in the descriptions bel?w· terranes are interpreted according to inferred tectonic environments. These environments are (I) cratonai; (2) passive continental margin; (3) metamorphosed continental margin; (4) continental-margin arc; (5) island arc; (6) oceanic crust, seamount, and ophiolite; (7) accretionary wedge and subduction zone: (8) turbidite basin; and (9) metamorphic for terranes that are too highly-deformed and metamorphosed to de~ermine the original tectonic environment. For terranes with complex geologic histories, the chosen color indicates the tectonic environment most prevalent during this history of the terrane. The tectonic environments inf~rred for igneous rocks are both temporal and genetic. The temporal environments are preaccretion and postaccretion. The genetic environments are subduction-related, rift-related, and collisional (anatectic)- related. In addition to terranes, the map also depicts postaccretion units that include: (I) Cenozoic and Mesozoic overlap assemblages of sedimentary and volcanic rocks that are deposited across two or more terranes that formed generally after accretion of most terranes in the region; (2) Cenozoic and Mesozoic basinal deposits that occur within a terrane or on the craton; (3) plutonic rocks. The postaccretion igneous units are identified by age-lithologic abbreviations and by name. These overlap assemblages and basinal deposits formed mainly during sedimentation and magmatism that occurred after accretion of terranes to each other or to a continental margin. Overlap assemblages provide minimum ages on the timing of accretion of terranes. Some Cenozoic and Mesozoic overlap assemblages and basinal deposits, as well as fragments of terranes, are extensively offset by movement along postaccretion faults. In addition, in onshore areas, the map depicts major preaccretion plutonic rocks that are limited to individual terranes. and in offshore areas. the map depicts major oceanic plates,-ocean floor magnetic lineations. oceanic spreading ridges, and seamounts. The map consists of five sheets. Sheets I and 2 depict, at a scale of I :5.000.000. the tectonostratigraphic terranes. preaccretion plutonic rocks, and postaccretion Cenozoic and Mesozoic overlap sedimentary, volcanic. and plutonic assemblages, and basinal deposits for the Circum- orth Pacific including the Russian Far East, northern Hokkaido Island of Japan, Alaska. the Canadian Cordillera, part of the U.S.A. Pacific Northwest. and adjacent offshore areas. Sheet 3 provides the list of map units for Sheets I and 2. Sheet 4 is a index map showing generalized onshore terranes and overlap assemblages for onshore parts of the Circum-North Pacific at a scale of I: I 0,000,000. Sheet 4 is a guide to the more complicated onshore features depicted on Sheets I and 2. Sheet 5 is an index map showing the major geographic regions for the Circum-North Pacific. Significant differences exist between the representation of onshore and offshore geology on Sheets I and 2. These are: (I) compared to the onshore part of the map, the offshore part is depicted in a more schematic fashion because of more limited data and because the offshore terranes and early Cenozoic and older overlap assemblages generally are obscured by extensive late Cenozoic sedimentary cover that is not shown unless thicker than two kilometers; (2) marginal contacts of offshore Cenozoic and Cretaceous sedimentary basins do not match contacts of onshore Cenozoic and Cretaceous sedimentary units because offshore basins are limited to those regions with sediment thicknesses greater than two kilometers; (3) stratigraphic columns, included at the end of this explanation. are provided only for onshore terranes because the geology of offshore terranes is generally less well-known; and (4) for simplicity, the major onshore Cenozoic sedimentary basins are generally not defined and described separately because the onshore part of the map is designed to emphasize terranes and overlap volcanic assemblages that are crucial for both for tectonic and metallogenic analyses published elsewhere (Nokleberg and others, 1993, 1994a). Several key geologic sources were used in the compilation of the map. For Alaska. the basic outcrop pattern for the map is from Beikman (1980), Gehrels and Berg (1992, 1994). Barker and others ( 1994). Brew (1994), and Moli-Stalcup and others ( 1994b). The distribution of terranes is from Jones and others (1987) and Monger and Berg (1987), with modification by Grantz and other (1991 ). Worall (199 1 ), okleberg and others (1993, 1994a), the cited references, and the Alaskan co-authors of this report. For the Canadian Cordillera. the basic outcrop pattern is from Monger and Berg ( 1987), Wheeler and other (1988). and Wheeler and McFeeley ( 1991) with modifications by the Canadian authors. For the northern part of the Russian Far East. the basic outcrop pattern is from So unov (1985) with modifications by the Russian authors. For the outhern part of the Russian Far East, the basic outcrop pattern is from Krasny (1991) and Bazhanov and Oleinik ( 1986) with modification by the Russian authors. The Russian Far East part of the map is the first attempt to define and delineate terranes in that region. In their compilation. the Russian authors utilized the methodology of U.S.A. and Canadian geologists. Because this map is the first attempt to display the terranes. Cenozoic and Mesozoic overlap assemblages. basinal deposit , and plutonic belts of the Russian Far East. the Russian author will appreciate constructive sugge tions for improving the map.

Open-File Report↗

USGS2024

Photogrammetry of the deep seafloor from archived unmanned submersible exploration dives

Large amounts of video images have been collected for decades by scientific and governmental organizations in deep (>1000 m) water using manned and unmanned submersibles and towed cameras. The collected images were analyzed individually or were mosaiced in small areas with great effort. Here, we provide a workflow for utilizing modern photogrammetry to construct virtual geological outcrops hundreds or thousands of meters in length from these archived video images. The photogrammetry further allows quantitative measurements of these outcrops, which were previously unavailable. Although photogrammetry had been carried out in recent years in the deep sea, it had been limited to small areas with pre-defined overlapping dive paths. Here, we propose a workflow for constructing virtual outcrops from archived exploration dives, which addresses the complicating factors posed by single non-linear and variable-speed vehicle paths. These factors include poor navigation, variable lighting, differential color attenuation due to variable distance from the seafloor, and variable camera orientation with respect to the vehicle. In particular, the lack of accurate navigation necessitates reliance on image quality and the establishment of pseudo-ground-control points to build the photogrammetry model. Our workflow offers an inexpensive method for analyzing deep-sea geological environments from existing video images, particularly when coupled with rock samples.

Journal of Marine Science and Engineering↗

USGS2021

Geophysical insights into Paleoproterozoic tectonics along the southern margin of the Superior Province, central Upper Peninsula, Michigan, USA

The southern margin of the Archean Superior Province in the central Upper Peninsula of Michigan was a nexus for key Paleoproterozoic tectonic events involved in the ~2.1 Ga rifting of proposed Archean supercraton Superia and subsequent assembly of Laurentia. Interpretations of the region’s tectonic history have historically been hampered by extensive Pleistocene glacial and Paleozoic sedimentary cover and a lack of appropriate geophysical data. These rifting and orogenic events formed geologic effects that are readily mappable with modern geophysical methods. New aeromagnetic and gravity data provide a critical means of mapping and interpreting the complex geological framework through cover, allowing development of significantly richer geographical and process-based perspectives on all these tectonic events. Interpretations of Precambrian contacts and structure are here, for the first time, carried >30 km eastward under Paleozoic cover. Effects of ~2.1 Ga rifting are strongly expressed geophysically, including the Dickinson Group, perhaps a unique record of the progression of rift-related sedimentation and magmatism, shown here to be a geographically extensive and largely concealed tectonic feature of the southern Superior Province. The geophysical evidence for plausible ~2.1 Ga rift-related intrusive magmatism includes a previously unrecognized swarm of northeast-striking mafic dikes cutting Archean rocks and gravity lows produced by granites. Effects of the ~1.87–1.83 Ga Penokean orogeny include gravity and magnetic gradients and pattern breaks along the Niagara fault zone suture, abundant evidence for thin-skinned thrusting and folding in the Menominee iron district, and speculative emplacement of an allochthonous sedimentary sequence in the Calumet trough. Numerous east–west trending structures imaged geophysically likely originated, or were significantly reactivated by, post-Penokean deformation. Metamorphic events at ~1.76 Ga and ~1.65 Ga may correspond to orogenies involving younger, outboard Paleoproterozoic crustal provinces recognized in southern Laurentia. For example, the previously unrecognized West Branch fault, separating the Dickinson Group from Archean rocks, is shown to be a major structure in the region, and is a proposed expression of ~1.76 Ga thick-skinned deformation. Oblique disruptions of crudely east–west striking structures have robust geophysical expressions and are speculatively connected to transpressive deformation at ~1.65 Ga. These new geophysical observations and interpretations collectively help illuminate a critical period in the tectonic evolution of Laurentia, as it transitioned from a disparate array of Archean cratons to a more coherent, growing continent.

Minnesota, Wisconsin, Michigan↗

USGS2015

Sixth International Limnogeology Congress: field trip guidebook, Reno, Nevada, June 15-19, 2015

Limnogeology is the study of modern lakes and lake deposits in the geologic record. Limnogeologists have been active since the 1800s, but interest in Limnogeology became prevalent in the early 1990s when it became clear that lake deposits contain continental environmental and climate records. A society that is focused on Limnogeology would allow greater communication and access to research on these important subjects and contribute to providing sound science used to understand rapid global changes in our modern world; thus the International Association of Limnogeology was founded in 1995 at the first International Limnogeology Congress (ILIC) held in Copenhagen, Denmark. The Sixth International Limnogeology Congress (ILIC6) was held in Reno, Nevada, from June 15–19, 2015. The ILIC meetings have been held every 4 years since the first meeting in1995 and were subsequently convened in Brest, France (1999), Tucson, USA (2003), Barcelona, Spain (2007), and Konstanz, Germany (2011). The Congress in Reno, USA marks the second time the Congress has been held in the United States and more than 150 scientists from every part of the world participated. As part of the Congress, ILIC6 included pre- and post- Congress field trips, the descriptions of which are included as separate trips in this Open-File Report. Trip 1 provides information on the pluvial and post-glacial Lakes of the eastern Great Basin, led by Paul Jewell, University of Utah, Ben Laabs, State University of New York-Geneseo, Jeff Munroe, Middlebury College, and Jack Oviatt, Kansas State University. Trip 2 contains information on the lake sequences of closed-basin lakes in the Eocene Green River Formation in Wyoming, led by Michael Smith, Northern Arizona University and Jennifer Scott, Mount Royal University. Trip 3 provides the background for the field trip to Pleistocene and modern lakes in the Great Basin of North America that was led by Susan Zimmerman, Lawrence Livermore National Laboratory, Ken Adams, Desert Research Institute, and Michael Rosen, U.S. Geological Survey. Trip 4 contains the information for a trip to the modern lakes in Lassen National Park that was led by Paula Noble and Kerry Howard, both from the University of Nevada, Reno. The U.S. Geological Survey has sponsored each ILIC that has been held in the United States because of the importance of understanding paleoclimate and contaminant histories of lakes, two main themes of the Congress. This field trip guide provides a permanent record of some of the wide variety of studies that are being conducted in modern lakes and ancient lake deposits in western North America, and it provides a starting point for any one desiring to visit these exceptional sites or begin work in these areas.

California, Nevada, Utah, Wyoming↗

USGS2026

The saline groundwater legacy of a large buried coastal paleo-estuary

Elevated groundwater salinity in coastal regions threatens the beneficial use of fresh groundwater. Coastal groundwater management typically focuses on preventing intrusion from modern sources of seawater; however, past geological processes can also leave a legacy of saline groundwater now hidden in the subsurface. Here, multiple extensive airborne electromagnetic surveys provide detailed evidence of residual salinity from a paleo-estuary filling a late Pleistocene incised valley impacting more than 10,000 km 2 that is now hidden beneath coastal Louisiana’s deltaic plain. Our results show that the three-dimensional pattern of saline groundwater beneath Louisiana mimics that of near-surface aquifers surrounding the modern Delaware Bay estuary, fingerprinting the signature of the past drowning of a large, incised valley of the Mississippi River following post-glacial sea-level rise. These findings demonstrate a new framework for understanding legacy sources of saltwater critical for managing stressed water resources along global coastlines.

Louisiana↗